Database Info

Magic bricked

Test methods need to unbrick my magic, so far I've tried one that I have not worked. If someone want to try things that I communicate them and I try.
After an upgrade of radio has been fried. I can not get into recovery, or fastboot. Even so I try to send commands and the command window stays and even restart <waiting for device> clicking to enter recovery fastboot or does nothing.
Excuse the translation but my English is very bad and I use the google translator

edugg said:
Test methods need to unbrick my magic, so far I've tried one that I have not worked. If someone want to try things that I communicate them and I try.
Click to expand...
Click to collapse
wow so much information don't know where to start!!!

hard to say..someone managed to the the phone to respond to fastboot/adb by starting up ADB..
wait for the waiting for device msg, then connect the phone to usb and turn it on.
if all method fails, bring it back to claim for warranty.

edugg said:
Test methods need to unbrick my magic, so far I've tried one that I have not worked. If someone want to try things that I communicate them and I try.
After an upgrade of radio has been fried. I can not get into recovery, or fastboot. Even so I try to send commands and the command window stays and even restart <waiting for device> clicking to enter recovery fastboot or does nothing.
Excuse the translation but my English is very bad and I use the google translator
Click to expand...
Click to collapse
What OS are you using on your computer?

zeroplace said:
What OS are you using on your computer?
Click to expand...
Click to collapse
I tested with Windows 7, Vista and XP and the same.

You know any way to flash as factory?

Will it actually turn on or does it just flash a red led when you press power?

bonesy said:
Will it actually turn on or does it just flash a red led when you press power?
Click to expand...
Click to collapse
Starts, appears the splash but only gets to that point

In that case it isnt bricked its just stuck...Bricked is when it wont turn on at all
Do you have a nandroid backup?
Have you taken the battery out and the power lead so it has no power?
i have had this problem
If you have a backup get it ready, Once you have let the phone power down totally (battery out and no lead) hold back and press power (keep holding back) this should get you into fastboot.if it doesnt unplug the lead and try again.
If thats successful.... using your nandroid files
FASTBOOT COMMANDS
fastboot erase system -w
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash userdata data.img
fastboot flash recovery recovery.img
Sorry if you cant get this to work i have to go out and wont be back to check till tomorrow so just giving you all the info

bonesy said:
In that case it isnt bricked its just stuck...Bricked is when it wont turn on at all
Do you have a nandroid backup?
Have you taken the battery out and the power lead so it has no power?
i have had this problem
If you have a backup get it ready, Once you have let the phone power down totally (battery out and no lead) hold back and press power (keep holding back) this should get you into fastboot.if it doesnt unplug the lead and try again.
If thats successful.... using your nandroid files
FASTBOOT COMMANDS
fastboot erase system -w
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash userdata data.img
fastboot flash recovery recovery.img
Sorry if you cant get this to work i have to go out and wont be back to check till tomorrow so just giving you all the info
Click to expand...
Click to collapse
I have tried many times to do this and nothing ever stays <waiting for device> and does nothing

Phone is not bricked, so this shouldnt be a problem.
If you cant get into fastboot with current setups, then use another recovery image and a custom rom.
(all that stuff is on SD-card.. its not that hard)
Update SDK.

daihiep said:
Phone is not bricked, so this shouldnt be a problem.
If you cant get into fastboot with current setups, then use another recovery image and a custom rom.
(all that stuff is on SD-card.. its not that hard)
Update SDK.
Click to expand...
Click to collapse
Great! And how should the recovery image and custom rom be put into the Magic? Sledgehammer?
The problem that almost everyone seems to not understand is that it's impossible to access fastboot, adb or any other (known) means.
The magic will hang at the first splashscreen no matter which buttons are pushed during power up. If the track ball is pressed during power on, the led lights up blue (still hanging at first splash). All other combos of buttons during power on makes no difference at all.
I have tried keeping fastboot waiting while power cycling the device (as explained in another thread), but there are no reaction. I have tried in xp, vista and linux.
I have also tried with a gold card, but since the phone seems unable to get any further than the first splash, this will not work.
So unless someone has a _NEW_ method to actually enter fastboot/ADB mode, these devices are BRICKED!
People have been discussing what the criteria for calling a phone a brick, but as far as I have care my Magic can only function as a paper weight and can therefore be called bricked.

Help
I have the same problem , the fastboot can not acces, i stay at the vodafone logo.
Any ideas?
HHHHHHHHHHHEEEEEEEEEEEELLLLLLLLLLPPPPPPPPPP.

frankiboy1 said:
Great! And how should the recovery image and custom rom be put into the Magic? Sledgehammer?
Click to expand...
Click to collapse
take out the sd card, put it in a usb adaptor and copy them over.
Also search for a thread "how i unbricked my phone"

frankiboy1 said:
Great! And how should the recovery image and custom rom be put into the Magic? Sledgehammer?
The problem that almost everyone seems to not understand is that it's impossible to access fastboot, adb or any other (known) means.
Click to expand...
Click to collapse
Think before answering.
Btw, question answered by htcmagic.

daihiep said:
Think before answering.
Btw, question answered by htcmagic.
Click to expand...
Click to collapse
I repeat: The problem that almost everyone seems to not understand is that it's impossible to access fastboot, adb or any other (known) means.
Having a recovery image and a custom rom on the SD card is useless if you are not able to get the phone accessing those files.
I have tried the "how I unbricked my phone" method (like I wrote in my first post) without any success. If you read the whole "how I unbricked my phone" thread you can see that there are several guys that did not have success with this method.
I have done a lot of thinking.... and searching...
Thanks

http://forum.xda-developers.com/showthread.php?t=571457 try there

Wrong HBOOT = real brick
Guys,
With a wrong HBOOT (what happend to me), the phone is a real brick...
And they refused to repair it... I bought a new phone. But I keep the old one in case someone break his screen. Then I can get the mobo.

just curious.
superkikim said:
Guys,
With a wrong HBOOT (what happend to me), the phone is a real brick...
And they refused to repair it... I bought a new phone. But I keep the old one in case someone break his screen. Then I can get the mobo.
Click to expand...
Click to collapse
How did you brick it?
Btw, have you tried to run any RUU update?
At least singapore one.

[Q] Help! Possible Brick or bad internal memory

I am looking for guidance this time.....I have a Nexus s I9020 (t mobile version) and a couple weeks ago I don't know what happened really but i may have been messing around with a newer version of clockwork recovery late one night .... then the phone wouldn't boot past the google screen and I couldn't do anything to fix it... I tried to figure things out the next day and this is a list of things i have figured out...
1. in clockwork it can't mount anything....like anything at all pertaining to the internal memory/storage
2. I was tired and irresponsible
3. I tried fastboot just about everything
4. I tried flashing newer/older versions of clock work......nothing worked
5. I have tried downloading and installing roms via adb and fastboot but an error message comes up...
6. now this I know is dumb on my part, but make fun of me as you will... I fastboot locked the device......I know it was stupid because now when I type in fastboot oem unlock it hangs and does nothing after I check unlock on the phone...
I can get into fastboot mode and it says no boot or recovery img?
now if I had access to the internal memory I would def. be able to go back to stock but there in lies the problem what on earth can i do to make this thing a paper weight?
this is what i'm talking about, the bootloader doesn't unlock it just hangs .... any thoughts?
"w w w.youtube.com/watch?v=C4cS0kMj4AI"

lg mytouch c800 bricked?

hi im pretty new here a friend of mine gave me her lg c800 mytouch to try and fix it for her.. not sure what she did she said she rooted the phone and the root was successful but i have a good idea that she doesnt know what she was doing..i will post a pic of the error screen im getting. but it says
E:Cant find misc
E:cant find misc
Finding update package...
E:unknown volume for path [sd:/download/adb_fastboot_and_other_tools.Zip]
E:Cant mount SDCARD:/download/adb_fastboot_and_other_tools.zip
Installation aborted
facory reset failed
restart factory reset..
now im far from a pro at this i know a lil more about computers and Ios devices..but ive rooted a few phones and to me it looks like she unzipped adb fastboot on her phone from her sd card??
ive tried holding F..A..vol down..and power..Nothing..
ive tried volume up .volume down and power still nothing..
BUT if i hold E..vol UP and power it brings me to a white screen that says S/W update
the big problem is the phone wont stay on long enough to do anything on the computer it stays on 3 sec. then reboots to same screen (computer says phone is unplugged) then phone just keeps restarting.
but the phone WILL stay on when i put it on the S/W update screen..but computer wont recognize the phone at all on that screen
ive tried the adb and fastboot commands but the phone wont stay recognized..it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
well thanks ahead of time if anyone has any input or solution
and hopefully all this will make sense to someone lol
i think this pic will work.. if not ill try again

any ideas please?? or am i completely out of luck?

When you say:
delilah25 said:
it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
Click to expand...
Click to collapse
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?

post-mortem said:
When you say:
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
Click to expand...
Click to collapse
Yes In Adb device list it shows the phone and then says recovery..but after that I don't have enough time to type any other commands ..the phone is also recognized in "my computer" as removable device then when the phone restarts seconds later it says device unplugged ..and just keeps restarting on its own till I remove the battery...I just read on the forum in a post that Adb will recognize the phone if it's off but I remove the battery and put it back in and plug in USB and phone turns on and keeps restarting won't even let me turn it off!! I'm losing patience with this thing lol
But I don't get why the error mentions fastboot? Not my phone so if it's not fixable I don't really care but I'm just the stuborn type when it comes to fixing electronics ..again thanks ahead of time to anyone that helps cuz I'm completely lost on this one

Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.

i have the same problem
post-mortem said:
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
Click to expand...
Click to collapse
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:

diabolus ae said:
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
Click to expand...
Click to collapse
Normally, if you want to flash a custom recovery through fastboot, people will tell you to run 2 commands:
fastboot flash recovery nameofimagefile.img
fastboot reboot recovery
Since you don't have time to execute those 2 commands, you can tell it to just boot from the .img file, without flashing over your current recovery. (This is actually proper form, as you can test if the .img file works properly without damaging your existing recovery.) The way you do that is to 1st copy a recovery .img file to the root of your SD card, then execute the following 1 command:
fastboot boot nameofimagefile.img
Since you only have ~3 seconds, type the command in, and wait for the right instant to hit enter on the keyboard. If the command is successfully sent to the phone, it will reboot into that .img.
See if that works for you. Good luck.

help- bricked it, no recovery, what now?

Hey yall. I had the phone for 6 days before I bricked it. I am wondering if there is any stock recovery mode or anything or what I shsould do? I think something went wrong due to using the root toolbox pro app. I have done some backups within the ap as well as Titanium Backup but now the phone will not boot up and I dont know if/how to put it in factory recovery mode. Soft reset does nothing. The Motorola logo will show on startup but then the screen just blacks out forever, not off, just colored black.
A few details, the phone was rooted with Motofail2go, with no recovery and bootloader still locked as far as I know.
Should I take it to Sprint for a factory reset? Is this even an option? What are my other options?
Next time I will probably use the Moto unlock key so I can open the bootloader all legit like and have a recovery mode...

Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Once unlocked flash the custom recovery of your choice (I like twrp). You can boot into custom recovery by holding volume up and the power button from a powered down state. Here is the link for instructions on how to flash twrp:
http://forum.xda-developers.com/showthread.php?t=1887070
Then you can download one of the stock backups for the Q posted in the development section and restore them using the custom recovery. Most of the ones I have seen have been compatible with twrp.
The only way to download the stock rom backups is to remove the sd card from your phone, plug your sd card into a PC or other device with a card reader, download the stock backups, and place the stock backup rom files on your sd card. Finally place the sd card with the stock backup downloads into your phone.
These backups and information on how to go through this process can be found in this thread on page 2: http://forum.xda-developers.com/showthread.php?t=2001226
The key is to make a backup of your existing rom with twrp and then move the stock backups from your sd card to the twrp/backups/yourdeiceserial/ directory. That creates a backup directory which twrp knows to look for backups in.
Don't feel bad, I've been in that state several times since getting the Q, live and learn.
Sent from my XT897 using xda app-developers app

UnicronAlpha99 said:
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Once unlocked flash the custom recovery of your choice (I like twrp). You can boot into custom recovery by holding volume up and the power button from a powered down state. Here is the link for instructions on how to flash twrp:
http://forum.xda-developers.com/showthread.php?t=1887070
Then you can download one of the stock backups for the Q posted in the development section and restore them using the custom recovery. Most of the ones I have seen have been compatible with twrp.
Don't feel bad, I've been in that state several times since getting the Q, live and learn.
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
If that does not work you could drop it in water or something. You have not officially unlocked boot loader so you still have warranty. Or you could just tell sprint it quit working and act completely clueless. At least its bricked with warranty still intact.

matt2k12 said:
Hey yall. I had the phone for 6 days before I bricked it. I am wondering if there is any stock recovery mode or anything or what I shsould do? I think something went wrong due to using the root toolbox pro app. I have done some backups within the ap as well as Titanium Backup but now the phone will not boot up and I dont know if/how to put it in factory recovery mode. Soft reset does nothing. The Motorola logo will show on startup but then the screen just blacks out forever, not off, just colored black.
A few details, the phone was rooted with Motofail2go, with no recovery and bootloader still locked as far as I know.
Should I take it to Sprint for a factory reset? Is this even an option? What are my other options?
Next time I will probably use the Moto unlock key so I can open the bootloader all legit like and have a recovery mode...
Click to expand...
Click to collapse
Both of the methods above are very effective. When I had the first photon I bricked it and just dropped it in water and did a claim. Depending on the insurance you have that way may cost you $100. The other method should work. When I first got this phone I did the exact same thing and to go back and unlock then flash twrp and in stall a stock backup someone had posted.
Sent from my XT897 using Tapatalk 2

UnicronAlpha99 said:
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Click to expand...
Click to collapse
Thanks for the response. Is there anything extra extra special about getting into factory fastboot mode? I can't seem to get it done. Is there an official set of instructions anywhere? Does the phone need to be plugged into the PC? It was always my understanding (for the last week) that Power and Vol Down was the soft reset mode which reboots the phone. Therefore it always tries to reboot in normal mode. This is what keeps happening. It never powers completely down using this method.
Anyhow, once I follow your instructions, the Moto logo appears, no Sprint logo appears, the phone "powers on" but the screen is blacked out (not off). After waiting for a while at the blank/black screen, or holding down several buttons like vol or camera I get the first attachment: "Process system is not responding. Would you like to close it?" When I wait nothing happens. When I push OK nothing happens. By chance, I held down power during the notification and the power menu came up behind the ANR notice (second/third attachments). So obviously there are some things working but the main system isn't booting up. And either factory fastboot is nuked or I can't figure it out. When I power down from this accessible power menu and try to do the fastboot (Power / Vol Down) I still havent gotten it to work.
Any other ideas before I take drastic measures?
Since I bought it from Amazon would that be my best route for return or should I go thru a Sprint store?
Thanks in advance.

Hi again yall. You know once I got to thinking about it, I decided to check out the return policy on Amazon Wireless. They will accept any device under warranty for the first 30 days and it is up to Moto for the next 11 months of warranty coverage. They email me a packing label and it ships out 1 day and they ship out the new phone 1 day shipping. Hard to beat, just takes 2 days of shipping and some more fun times with my Epic, 10.1CM style, in the meantime.
Who's to say it wasnt some sort of hardware or software glitch that bricked the phone rather than my screwing around? Nobody knows and it isn't up to the consumer to prove his innocence. I bought everything legally, all the apps at the app store, and only ran the motofail2go root method. Wasn't running any custom Roms, Mods, or anything. I don't feel bad after they got me for another 2 grand for 24 months, and since I have been with Sprint for 10 years;l I have spent well over 10k or 15k with them lifetime.
If any other method pops up between now and when I ship it out I may give it a shot but if not, ah well, capitalism.

matt2k12 said:
Thanks for the response. Is there anything extra extra special about getting into factory fastboot mode? I can't seem to get it done. Is there an official set of instructions anywhere? Does the phone need to be plugged into the PC? It was always my understanding (for the last week) that Power and Vol Down was the soft reset mode which reboots the phone. Therefore it always tries to reboot in normal mode. This is what keeps happening. It never powers completely down using this method.
Anyhow, once I follow your instructions, the Moto logo appears, no Sprint logo appears, the phone "powers on" but the screen is blacked out (not off). After waiting for a while at the blank/black screen, or holding down several buttons like vol or camera I get the first attachment: "Process system is not responding. Would you like to close it?" When I wait nothing happens. When I push OK nothing happens. By chance, I held down power during the notification and the power menu came up behind the ANR notice (second/third attachments). So obviously there are some things working but the main system isn't booting up. And either factory fastboot is nuked or I can't figure it out. When I power down from this accessible power menu and try to do the fastboot (Power / Vol Down) I still havent gotten it to work.
Any other ideas before I take drastic measures?
Since I bought it from Amazon would that be my best route for return or should I go thru a Sprint store?
Thanks in advance.
Click to expand...
Click to collapse
Try using adb. If your computer has drivers on it for phone you might able to get into fast boot. If that does not work I would try Sprint store first. Have locked my phone up several times while hacking wife off in progress and have used adb every time. Only time i have been truely scared is when i soft bricked my nexus 7. had to stay at work for two hours after i got off to get it to recover because i was scared of her lol.
---------- Post added at 02:05 PM ---------- Previous post was at 01:57 PM ----------
If you get adb to recognize device you could take chance and officially unlock boot loader. Then flash twrp. There is a thread in general section about having trouble getting official update. It has a stock recovery in it. Trick would be moving files to recovery section of twrp

I have gotten the phone to soft power down and get into fast boot and custom recovery. It's a bit tricky with timing, I usually wait for the screen to go black after soft reset, let go, and immediately hold power and volume down. If you can not boot into fastboot I honestly don't know what you can do either than return the phone.
Sent from my XT897 using xda app-developers app

UnicronAlpha99 said:
I have gotten the phone to soft power down and get into fast boot and custom recovery. It's a bit tricky with timing, I usually wait for the screen to go black after soft reset, let go, and immediately hold power and volume down. If you can not boot into fastboot I honestly don't know what you can do either than return the phone.
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help Unicron. I think Brandons method might be my only alternative... but you know what? I already have the box packed up to ship back to Amazon! I am still a noob; I dunno if I could go the distance on this one. I have been updating my Android SDK files since I got the phone but I never got it to recognize boot up thru ADB fastboot. disclaimer* I havent tried it in a couple days since all teh SDK updates completed.
I dunno though I am a big time DIYer when possible. If it werent for the massive amount of tape I put on the box and packing label I would already be trying this method. I can't convince myself just yet. Amazon makes it too easy. I could have the *new* phone by Friday. Then I wouldn't be wasting my remaining work week trying to hack into my personal Christmas present in order to make it function...........................................
Edit - Yes I'm impatient. My job is too demanding and I am trying to set a good precedent for 2013. Wasting the first 3 work days on a phone is not how I intend to start off the year. There is probably a valuable lesson to be learned from this as far as hacking experience and to be honest with the responses here I think I could get it to boot up from PC in SDK/ADB mode and go from there. I just didnt know if that was possible until after I made the claim with Amazon. I still have an entire day today and tomorrow if I want to indulge myself. It doesnt matter if I mail the package today or Wednesday, I can still get it by Friday. I believe this thread is still valuable because we have patterns of repeating past failures and I may find use of it when I recieve my new phone and, darn it, it mysteriously bricks as well. in the same fashion.... the only thing I was really trying to do was get all my apps on my SD card... sad huh?
Edit 2 - Opened up the box, tried fastboot and adb, nothing. Off she goes.

I don't blame you, it sounds easier to exchange in your case any way. The main suggestion I have is if you are getting into any type of build.prop or operating system tweaks that have potential to lead to boot loops or cause the phone not to boot, then unlock the bootloader and install custom recovery.
The Moto-fail method seems limited to only be able to run apps that require root. For me this has no use as I want to be able to have complete control over all aspects of the Android OS. There is not a huge mod community for the Q as yet but I believe Cyanogen will be a reality as Interloper continues working on it. I came from an Epic with Cyanogen and soft-bricked it a minimum of 50 times. CWM was very forgiving on that phone, the Q is a lot more finicky and frustrating.
If you have insurance through the carrier then you are going to pay $150 for a refurb if something goes wrong and you hard brick the phone. If you unlock bootloader and install custom recovery then you have a fail-safe in the form of nandroid backups and restores. Then you can mod away with little fear.
Good luck on the new phone and I hope you don't give up after six days of modding with the Q!
Sent from my XT897 using xda app-developers app

matt2k12 said:
Thanks for the help Unicron. I think Brandons method might be my only alternative... but you know what? I already have the box packed up to ship back to Amazon! I am still a noob; I dunno if I could go the distance on this one. I have been updating my Android SDK files since I got the phone but I never got it to recognize boot up thru ADB fastboot. disclaimer* I havent tried it in a couple days since all teh SDK updates completed.
I dunno though I am a big time DIYer when possible. If it werent for the massive amount of tape I put on the box and packing label I would already be trying this method. I can't convince myself just yet. Amazon makes it too easy. I could have the *new* phone by Friday. Then I wouldn't be wasting my remaining work week trying to hack into my personal Christmas present in order to make it function...........................................
Edit - Yes I'm impatient. My job is too demanding and I am trying to set a good precedent for 2013. Wasting the first 3 work days on a phone is not how I intend to start off the year. There is probably a valuable lesson to be learned from this as far as hacking experience and to be honest with the responses here I think I could get it to boot up from PC in SDK/ADB mode and go from there. I just didnt know if that was possible until after I made the claim with Amazon. I still have an entire day today and tomorrow if I want to indulge myself. It doesnt matter if I mail the package today or Wednesday, I can still get it by Friday. I believe this thread is still valuable because we have patterns of repeating past failures and I may find use of it when I recieve my new phone and, darn it, it mysteriously bricks as well. in the same fashion.... the only thing I was really trying to do was get all my apps on my SD card... sad huh?
Edit 2 - Opened up the box, tried fastboot and adb, nothing. Off she goes.
Click to expand...
Click to collapse
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.

befrosty8612 said:
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
Click to expand...
Click to collapse
Sure wish I would have known that ahead of time. Does this work without any recovery mode and with the bootloader still locked?

matt2k12 said:
Sure wish I would have known that ahead of time. Does this work without any recovery mode and with the bootloader still locked?
Click to expand...
Click to collapse
It does work without any recovery mode and I believe it still works without the bootloader being unlocked, I didn't know about this myself until after I had already unlocked it. Sorry I couldn't help out sooner.

befrosty8612 said:
It does work without any recovery mode and I believe it still works without the bootloader being unlocked, I didn't know about this myself until after I had already unlocked it. Sorry I couldn't help out sooner.
Click to expand...
Click to collapse
Awesome, I am wanting to do the backdoor root method again but, of course, may brick it. I dont think Amazon will keep sending me new ones.... but maybe!

befrosty8612 said:
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
Click to expand...
Click to collapse
For anyone concerned, I knew it would only be a matter of time until bricking my new device. This damn Root Toolbox Pro did it to me again, and on a simple, menial task. I am going to be working thru the motions on getting this to work.
Using the instructions quoted I did get stock recovery to work or at least flash on the screen for a split second. Seems like there is a timer on the recovery screen. I am having trouble with the fastboot prompt though on the PC. Do I do it in the "platform-tools" folder which contains fastboot or in the "tools" folder of the main SDK directory? I am really a noob, can you give me the cliff notes of how to get into ADB, fastboot, etc on the Photon Q in order to do a factory reset? I already have Android SDK installed and completely up to date so that is done. And Fastboot is installed. I'm just having trouble crossing the finish line here... I can get the fastboot page opened in the stock recovery but from there I'm lost. I dont know what to type into the command prompt, in what directory, or what.... Also when I open the command prompt in the SDK folder on the PC with fastboot in the directory and type "adb reboot bootloader" it says "device not found". Maybe (surely) that is the wrong prompt?
FWIW my phone is showing the dead android guy. I didnt do anything besides try and clear up my Play Store download list which required a reboot. The phone never started back up. I dont know how much damage was done or info was lost or whatever, but seeing as how I was rooted but still locked, I had no custom recovery. So no back ups. Is there anything to restore or am I looking at a full wipe and restore?

matt2k12 said:
For anyone concerned, I knew it would only be a matter of time until bricking my new device. This damn Root Toolbox Pro did it to me again, and on a simple, menial task. I am going to be working thru the motions on getting this to work.
Using the instructions quoted I did get stock recovery to work or at least flash on the screen for a split second. Seems like there is a timer on the recovery screen. I am having trouble with the fastboot prompt though on the PC. Do I do it in the "platform-tools" folder which contains fastboot or in the "tools" folder of the main SDK directory? I am really a noob, can you give me the cliff notes of how to get into ADB, fastboot, etc on the Photon Q in order to do a factory reset? I already have Android SDK installed and completely up to date so that is done. And Fastboot is installed. I'm just having trouble crossing the finish line here... I can get the fastboot page opened in the stock recovery but from there I'm lost. I dont know what to type into the command prompt, in what directory, or what.... Also when I open the command prompt in the SDK folder on the PC with fastboot in the directory and type "adb reboot bootloader" it says "device not found". Maybe (surely) that is the wrong prompt?
FWIW my phone is showing the dead android guy. I didnt do anything besides try and clear up my Play Store download list which required a reboot. The phone never started back up. I dont know how much damage was done or info was lost or whatever, but seeing as how I was rooted but still locked, I had no custom recovery. So no back ups. Is there anything to restore or am I looking at a full wipe and restore?
Click to expand...
Click to collapse
As abnormal as it seems, your situation seems pretty normal... at least from my shoes. I went through the same scenario... I didn't know what adb was, or fastboot, etc. So, here's what I know
the fastboot commands work even if adb doesnt see it in the list of devices attached. Somehow it just works (as long as the phone is in fastboot mode).
If you're able to get to the fastboot mode, things should be okay. Just open a windows explorer window to the Platform-Tools, hold the shift key and right click on a blank space within the window, then click open command window here.
you should be able to pass any adb (if the phone is on and recognized) or fastboot (if phone is in fastboot mode) commands from that command prompt.
Also, if you have a stock recovery, CMW, or TWRP image, this is the folder to copy those .img files to. Once you get your phone into fastboot mode and its plugged into the computer, just type into the command prompt:
Code:
fastboot flash recovery recovery.img
If you're just looking to reboot the phone into recovery
If you have a CWM or TWRP recovery just replace the recovery.img with whatever the .img file that you have. Also, as a tip instead of writing the entire file name, just press the first couple letters then press the tab key within the command prompt, it should fill in the rest. keep pressing tab until you get to the .img file name you want.
To avoid doing this again, maybe I can help... what were you trying to do to begin with? From the sound of it, you were trying to root the phone with the Root Toolbox Pro but it bricked, and then you tried to reboot into recovery and then got the red android... ?

befrosty8612 said:
As abnormal as it seems, your situation seems pretty normal... at least from my shoes. I went through the same scenario... I didn't know what adb was, or fastboot, etc. So, here's what I know
the fastboot commands work even if adb doesnt see it in the list of devices attached. Somehow it just works (as long as the phone is in fastboot mode).
If you're able to get to the fastboot mode, things should be okay. Just open a windows explorer window to the Platform-Tools, hold the shift key and right click on a blank space within the window, then click open command window here.
you should be able to pass any adb (if the phone is on and recognized) or fastboot (if phone is in fastboot mode) commands from that command prompt.
Also, if you have a stock recovery, CMW, or TWRP image, this is the folder to copy those .img files to. Once you get your phone into fastboot mode and its plugged into the computer, just type into the command prompt:
Code:
fastboot flash recovery recovery.img
If you're just looking to reboot the phone into recovery
If you have a CWM or TWRP recovery just replace the recovery.img with whatever the .img file that you have. Also, as a tip instead of writing the entire file name, just press the first couple letters then press the tab key within the command prompt, it should fill in the rest. keep pressing tab until you get to the .img file name you want.
To avoid doing this again, maybe I can help... what were you trying to do to begin with? From the sound of it, you were trying to root the phone with the Root Toolbox Pro but it bricked, and then you tried to reboot into recovery and then got the red android... ?
Click to expand...
Click to collapse
Thanks for the response. So, all I have to do is: go to fastboot and flash a stock recovery image file and it will automatically wipe the phone, cache, everything, and restore the operating system? Sounds awfully easy! I found some stock files in this post : http://forum.xda-developers.com/showthread.php?t=2001226&page=2 Are these the ones you used before?
Last question: I can flash CWM or TWRP but wont be able to access them if my bootloader is locked, correct? So flashing a stock recovery will allow me to have my stock phone back again, locked and un-rooted? I guess if I cant get it to work with the stock recovery then I can unlock the bootloader and do a CWM or TWRP recovery and then flash the stock .img files?
Thanks again for your help. I already had root with the motofail2go method which I like using but seems like when I try and use some generic root feature from apps from the app store that it will crash/brick the phone cuz obviously those apps are generalized and likely to brick certain percentage of devices....

Ok what does this mean? Something with the bootlaoder obviously. Does it need to be unlocked?
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash recover
y qrecovery1.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (5962 KB)...
OKAY [ 0.479s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.755s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
And on the phone screen it says "invalid image size for partition recovery" twice for both times I tried this method.

You will need to flash the system image as well if you want those, as the recovery image will only flash the recovery. The files in that link are for twrp only... so you'll have to be able to get there first.
With the custom recoveries, I'm not 100% sure whether or not you will be able to use them without being unlocked. I would wait to see if anyone else can answer that question for you, but if you did try it without an unlocked bootloader, you at least have the stock recovery to fall back on if needed.
Sent from my XT897 using xda app-developers app
---------- Post added at 09:16 PM ---------- Previous post was at 09:12 PM ----------
I'm thinking it could either be that your phone is full and the image you're flashing is too large to fit on the space available...
Or you're trying to flash custom software on a locked phone.
Hopefully someone is able to answer that a little better...
Sent from my XT897 using xda app-developers app

You can't alter the stock recovery (flash a custom recovery like twrp or cwm) in fastboot without having the bootloader unlocked. Your options are to unlock your bootloader, flash custom recovery, create a backup of your current setup, download one of the stock working backups, place it in the backups folder for twrp on your external sd card, and restore one of the known working backups in the development section (befrosty linked to one). Or you could use RSD lite to return to stock using a stock factory firmware flash. That involves connecting your phone to your PC and flashing the phone back to factory stock. Information on RSD Lite and links to the FXZ's can be found here.
http://forum.xda-developers.com/showthread.php?t=2095536
Sent from my XT897 using xda app-developers app

{Solved} Pixel 2 Bricked, need help.

Hey Guys. I'm new to the Pixel 2 and have found myself stuck and not sure what to do. I'm stuck at this screen and keep getting getting an error message staying "Slot Unbootable: Load Error". I am not able to get into fastboot to flash the "Deuces" script or to flash a new system image.
I have tried all of the basic stuff to get to my device to be recognized. I downloaded and installed the latest ADB & Fastboot and I have tried different cables and USB ports and still have no luck. I'm really worried and not sure what to do if I cannot get my device to accept fastboot commands so I can recover.
Please let me know if you have any ideas that may help me.
Jason
EDIT:
I still have no idea what I did, but I decided to use the Skipsoft Tool to see if it would work. Lucky for me it did and I was able to restore the factory image. Sorry for the fire-drill, I should have tried this before I posted. Thank you for the replies!!

Grab the latest Google platform tools and USB drivers. When your device is plugged in, do you see any unknown devices in your device manager? Or anything that looks like it could be your phone?

jascolli said:
Hey Guys. I'm new to the Pixel 2 and have found myself stuck and not sure what to do. I'm stuck at this screen and keep getting getting an error message staying "Slot Unbootable: Load Error". I am not able to get into fastboot to flash the "Deuces" script or to flash a new system image.
I have tried all of the basic stuff to get to my device to be recognized. I downloaded and installed the latest ADB & Fastboot and I have tried different cables and USB ports and still have no luck. I'm really worried and not sure what to do if I cannot get my device to accept fastboot commands so I can recover.
Please let me know if you have any ideas that may help me.
Jason
Click to expand...
Click to collapse
I've seen that before.
When you select reboot bootloader does that message go away?
Try it without the cable plugged in does it go away then?
I just want to know if you can actually get that message to go away or not at this point.
Also can you link the tools you are downloading

jascolli said:
I still have no idea what I did, but I decided to use the Skipsoft Tool to see if it would work. Lucky for me it did and I was able to restore the factory image. Sorry for the fire-drill, I should have tried this before I posted. Thank you for the replies!!
Click to expand...
Click to collapse
For future learning, I'd recommend you familiarize yourself with how to do this without toolkits. A toolkit is nice, but it really helps to understand what the toolkit is doing so that if you have an issue you know what to do next.

Telperion said:
For future learning, I'd recommend you familiarize yourself with how to do this without toolkits. A toolkit is nice, but it really helps to understand what the toolkit is doing so that if you have an issue you know what to do next.
Click to expand...
Click to collapse
Solid advice, thank you.

I did this same thing and solved it the same way. I think things just get funky and the tool you mentioned to fix it.

nolimit78 said:
I did this same thing and solved it the same way. I think things just get funky and the tool you mentioned to fix it.
Click to expand...
Click to collapse
Yeah I'm baffled. I could not for the life of me get fastboot to work. That Skipsoft tool is pretty impressive.

HELP!!!!
I have same problem, so which functions you use to fix it????
jascolli said:
Hey Guys. I'm new to the Pixel 2 and have found myself stuck and not sure what to do. I'm stuck at this screen and keep getting getting an error message staying "Slot Unbootable: Load Error". I am not able to get into fastboot to flash the "Deuces" script or to flash a new system image.
I have tried all of the basic stuff to get to my device to be recognized. I downloaded and installed the latest ADB & Fastboot and I have tried different cables and USB ports and still have no luck. I'm really worried and not sure what to do if I cannot get my device to accept fastboot commands so I can recover.
Please let me know if you have any ideas that may help me.
Jason
EDIT:
I still have no idea what I did, but I decided to use the Skipsoft Tool to see if it would work. Lucky for me it did and I was able to restore the factory image. Sorry for the fire-drill, I should have tried this before I posted. Thank you for the replies!!
Click to expand...
Click to collapse

Same thing happened to me. I need help. Please tell me how you unbricked your phone

same problem
i have the same problem already download skipsoft program but dont have results can you tell me the steps what you do please
---------- Post added at 07:48 AM ---------- Previous post was at 07:43 AM ----------
yuva_cool said:
Same thing happened to me. I need help. Please tell me how you unbricked your phone
Click to expand...
Click to collapse
do you already unbricked your phone?

my pixel still cant be detected by that toolkit, can u list the step by step procedure what u did to unbrick the device?

I was having the exact same issue as OP. I wound up fixing it by entering fastboot and making it display barcodes until the battery died. Then I put a rubber band over the power button so the red led would blink (I wanted to completely drain the battery). When it stopped blinking, I hooked my dead phone up to my PC via a USB 3 port and held Power + vol down to boot into fastboot (the battery was still too low for the phone to boot normally -- it would just show the battery icon). Surprisingly, my PC recognized my phone (made the little USB sound) and I was able to fastboot flash-all the newest factory image on it!! No toolkits required!
I'm so happy because this was a last ditch effort before I sent my original phone back to google and would have to live with the RMA they sent me which could not be bootloader unlocked (this is a whole other issue!)
I hope this helps!
EDIT: Info I provided in a PM
Unfortunately I didn't take any photos of the process... I didn't want to push my luck and things are working now. But The photo I've attached was exactly what I was seeing except I was on the December update (Now I'm on the January update) ... and:
UFS: 128 GB Hynix
DRAM: 4096MB Micron LPDDR4
Device State: unlocked (I had been unlocked since April 2018)
Until I had entirely drained my battery, I couldn't do anything. Download mode and recovery mode were impossible to access. I forgot the specific error, but it was the same as a lot of other people who have been having this problem.
The only thing I could do was to restart bootloader, which removed the error message until I tried to do anything. I couldn't boot at all or do anything conducive to fixing my phone until I drained the battery entirely. I couldn't get any PCs to even acknowledge the existance of my phone until after the battery was drained.
Keep in mind, I NEVER got my RMA phone to work. I was only able to fix my original NEW phone that I had purchased directly from google.

Until I had entirely drained my battery, I couldn't do anything. Download mode and recovery mode were impossible to access. I forgot the specific error, but it was the same as a lot of other people who have been having this problem.
The only thing I could do was to restart bootloader, which removed the error message until I tried to do anything. I couldn't boot at all or do anything conducive to fixing my phone until I drained the battery entirely. I couldn't get any PCs to even acknowledge the existance of my phone until after the battery was drained.
Click to expand...
Click to collapse
This is the correct resolution to this issue.
I had the same issue, no usb in bootloader. I drained the phone and rebooted into the Bootloader flash A and B side bootloader the Aug 2018 (previously working for me) and A and B side Radio, as well as the System image. After that everything booted fine.
Attempted to install the January update the same way and it worked as well.
Seems like they messed up A and B side flashing
My steps::: For Lurkers having this issue.
1. Drain battery DEAD!
2. Boot Bootloader (Vol Down + Power)
3. fastboot flash bootloader bootloader-walleye-mw8998-002.0073.02.img (or whatever image)
3. fastboot set_active b (opposite of the one on screen)
4. fastboot reboot-bootloader
5. fastboot flash bootloader bootloader-walleye-mw8998-002.0073.02.img (or whatever image) (Again)
6. fastboot reboot-bootloader
7. fastboot flash radio radio-walleye-g8998-00253-1809191716.img (or whatever image)
8. fastboot set_active a (opposite of the one on screen)
9. fastboot reboot-bootloader
10. fastboot flash radio radio-walleye-g8998-00253-1809191716.img (or whatever image)
11. fastboot reboot-bootloader
12. fastboot update image-walleye-pq1a.190105.004.zip (or whatever image)
Phone boots properly, and is updated.

thedude9821 said:
I was having the exact same issue as OP. I wound up fixing it by entering fastboot and making it display barcodes until the battery died. Then I put a rubber band over the power button so the red led would blink (I wanted to completely drain the battery). When it stopped blinking, I hooked my dead phone up to my PC via a USB 3 port and held Power + vol down to boot into fastboot (the battery was still too low for the phone to boot normally -- it would just show the battery icon). Surprisingly, my PC recognized my phone (made the little USB sound) and I was able to fastboot flash-all the newest factory image on it!! No toolkits required!
I'm so happy because this was a last ditch effort before I sent my original phone back to google and would have to live with the RMA they sent me which could not be bootloader unlocked (this is a whole other issue!)
I hope this helps!
EDIT: Info I provided in a PM
Unfortunately I didn't take any photos of the process... I didn't want to push my luck and things are working now. But The photo I've attached was exactly what I was seeing except I was on the December update (Now I'm on the January update) ... and:
UFS: 128 GB Hynix
DRAM: 4096MB Micron LPDDR4
Device State: unlocked (I had been unlocked since April 2018)
Until I had entirely drained my battery, I couldn't do anything. Download mode and recovery mode were impossible to access. I forgot the specific error, but it was the same as a lot of other people who have been having this problem.
The only thing I could do was to restart bootloader, which removed the error message until I tried to do anything. I couldn't boot at all or do anything conducive to fixing my phone until I drained the battery entirely. I couldn't get any PCs to even acknowledge the existance of my phone until after the battery was drained.
Keep in mind, I NEVER got my RMA phone to work. I was only able to fix my original NEW phone that I had purchased directly from google.
Click to expand...
Click to collapse
omg after months of figuring it out ,and almost opt for warranty,finally my pixel is aliveeeee, thanks alot for the fix im so glad.. and whats more important for me is the data is still intact! i cant thank you enough.. google messed up december update pretty bad.

I just received my 4th RMA and the bootloader wasn't able to unlock. So to my surprise Google is giving me a full refund? I purchased my Pixel 2 back in Nov 2017 ?

Dajax2 said:
3. fastboot flash bootloader bootloader-walleye-mw8998-002.0073.02.img (or whatever image)
Click to expand...
Click to collapse
@Dajax2 Super new to this and it may be a total waste since my bootloader screen says "Device State: locked" but in trying to flash or even sideload ota, the command returns "error: cannot load (file location/name): no such file or directory found". Again, total noob and I don't even know if I'm supposed to unzip the folder or not but have tried both ways with the same error.
It returns the serial number for fastboot devices but nothing for adb devices. I obviously didn't have OEM or USB debugging enabled prior. Hoping I can at least get in to retrieve data before giving up all hope :/

Solved. Enter barcode mode. In this screen, check for devices from adb or fastboot. It should be there. You are now able to switch slots and do all the fastboot things.

Great workaround that I would never have thought - good info here, thanks everyone!

dianea said:
Solved. Enter barcode mode. In this screen, check for devices from adb or fastboot. It should be there. You are now able to switch slots and do all the fastboot things.
Click to expand...
Click to collapse
Edit - My phone wasn't detected when on the barcode screen, just like from the main bootloader screen.
HOWEVER... to my surprise.. the above method of draining the battery completely to 0% actually worked. I'm a little dumbfounded why this allowed the bootloader to connect via fastboot again, but it did. I was able to flash the latest factory image (without wipe) and boot back up like nothing ever happened. Thank you so much for the tip. I passed this along to Google support and they also said they appreciate the troubleshooting and asked me to just send back the replacement phone with the RMA package/label.
---------- Post added at 06:36 PM ---------- Previous post was at 06:18 PM ----------
thedude9821 said:
Keep in mind, I NEVER got my RMA phone to work. I was only able to fix my original NEW phone that I had purchased directly from google.
Click to expand...
Click to collapse
Did they accept the RMA phone back and remove the temp auth on your card?

thedude9821 said:
I was having the exact same issue as OP. I wound up fixing it by entering fastboot and making it display barcodes until the battery died. Then I put a rubber band over the power button so the red led would blink (I wanted to completely drain the battery). When it stopped blinking, I hooked my dead phone up to my PC via a USB 3 port and held Power + vol down to boot into fastboot (the battery was still too low for the phone to boot normally -- it would just show the battery icon). Surprisingly, my PC recognized my phone (made the little USB sound) and I was able to fastboot flash-all the newest factory image on it!! No toolkits required!
I'm so happy because this was a last ditch effort before I sent my original phone back to google and would have to live with the RMA they sent me which could not be bootloader unlocked (this is a whole other issue!)
I hope this helps!
EDIT: Info I provided in a PM
Unfortunately I didn't take any photos of the process... I didn't want to push my luck and things are working now. But The photo I've attached was exactly what I was seeing except I was on the December update (Now I'm on the January update) ... and:
UFS: 128 GB Hynix
DRAM: 4096MB Micron LPDDR4
Device State: unlocked (I had been unlocked since April 2018)
Until I had entirely drained my battery, I couldn't do anything. Download mode and recovery mode were impossible to access. I forgot the specific error, but it was the same as a lot of other people who have been having this problem.
The only thing I could do was to restart bootloader, which removed the error message until I tried to do anything. I couldn't boot at all or do anything conducive to fixing my phone until I drained the battery entirely. I couldn't get any PCs to even acknowledge the existance of my phone until after the battery was drained.
Keep in mind, I NEVER got my RMA phone to work. I was only able to fix my original NEW phone that I had purchased directly from google.
Click to expand...
Click to collapse
Dajax2 said:
This is the correct resolution to this issue.
I had the same issue, no usb in bootloader. I drained the phone and rebooted into the Bootloader flash A and B side bootloader the Aug 2018 (previously working for me) and A and B side Radio, as well as the System image. After that everything booted fine.
Attempted to install the January update the same way and it worked as well.
Seems like they messed up A and B side flashing
My steps::: For Lurkers having this issue.
1. Drain battery DEAD!
2. Boot Bootloader (Vol Down + Power)
3. fastboot flash bootloader bootloader-walleye-mw8998-002.0073.02.img (or whatever image)
3. fastboot set_active b (opposite of the one on screen)
4. fastboot reboot-bootloader
5. fastboot flash bootloader bootloader-walleye-mw8998-002.0073.02.img (or whatever image) (Again)
6. fastboot reboot-bootloader
7. fastboot flash radio radio-walleye-g8998-00253-1809191716.img (or whatever image)
8. fastboot set_active a (opposite of the one on screen)
9. fastboot reboot-bootloader
10. fastboot flash radio radio-walleye-g8998-00253-1809191716.img (or whatever image)
11. fastboot reboot-bootloader
12. fastboot update image-walleye-pq1a.190105.004.zip (or whatever image)
Phone boots properly, and is updated.
Click to expand...
Click to collapse
Gifted both of you Ad-Free for this.
You saved me $300 and the annoyance of having to wait for shipping for either RMA or another phone on Swappa.