** Just got your epic and wanna dive in?
** Wanna clean upgrade?
** Wanna just check it out?
** Want stock Froyo EB13 AND root AND Clockwork all from a single Odin flash?
THIS IS NOT A CUSTOM ROM, IT IS SPRINT STOCK ROM. ALL SPRINT STOCK APPS ARE INCLUDED ( LIKE ITS A NEW PHONE) IT IS NOT MEANT FOR PEOPLE WITH CLOCKWORK ENABLED PHONES AND SHOULD ONLY BE USED IF YOU WISH TO RETURN TO A STOCK ROM OR IF YOUR PHONE DOESN'T BOOT.
Here ya go!
Thanks to:
- noobnl and Firon for the CW zImage from the 1click.
- noobnl for odin, CW redirector.
- skeeterslint,firon and bubby323 for the chats about it.
- Shabbypenguin for the DK17 system dump.
- bubby323 for the DK28 Tarball
- the mystery person who leaked DK17 Full.
- k0nane for the flashable dk17/DK28
- Kousch for CW
- Samsung(oddly) for bucking sprint and putting out the tarball ahead of time.
- Dameon87 for CW 3.0.0.5(ext4) and his deodexed eb13 and voicesearch fix
A Jump start for new users:
EB13 Kernel
EB13 Modem
EB13 Filesystem
Latest Clockwork installed as 3button Recovery AND quickboot/rom manager recovery bootable.
**Updates
02.24.11
- EB13 Stock system
- Pre Rooted
- Voice search Fix for ext4 deodexed. Get it here THANKS DAMEON!
12.05.10
- New OTA REL Release of DK28
- Two versions ODEX and DEODEX
- Clockwork Recovery and Recovery Re-director
- Rooted
- GPS "hacks" in place to help speed up locks.
11.27.10
- It is now zip aligned, pre-rooted, deodexed.
11.28.10
- Added in noobs redirector which works properly now.
- Added in the Market Fix (thanks Shabby!)
- Added in the no 100% battery popup.(thanks Daemon87 and raiderep!)
**FLASH AT OWN RISK**
WHEN YOU SELECT THE PIT OR TAR FILE IN THE PDA/PIT SECTIONS OF ODIN MAKE SURE THEY HAVE CHECKMARKS NEXT TO THEM IF THEY DONT TICK THE BOX. nOT RESPONSIBLE IN ANYWAY FOR ANYTHING THAT GOES WRONG, IF YOU'RE UNSURE ABOUT SOMETHING GO LOOK IT UP
It has been tested on my phone but it WILL overwrite everything(except SDcard of course so make a Nand)
Stock EB13 with Clockwork 2.5 and RFS
Instructions:
Step 1. Boot your phone into download by powering off your phone holding 1 on the keyboard and holding power til you see the little Yellow digger.
Step 2. On your computer launch the included odin.exe and select the included victory pit and under PDA select the included EB13-Extended-2.5.tar or EB13-Extended-3.tar
Step 3. Plug in the usb cable.(if it's done right you should see a yellow Com device.)
Step 4. Click Start and wait.
Stock EB13 Deodexed EXT4 + CW 3.0.0.6
Instructions:
Step 1. Boot your phone into download by powering off your phone holding 1 on the keyboard and holding power til you see the little Yellow digger.
Step 2. On your computer launch the included odin.exe and select the included EB13-ext4.pit and under PDA select the included EB13-Extended-3.tar
Step 3. Plug in the usb cable.(if it's done right you should see a yellow Com device.)
Step 4. Tick Repartition
Step 4. Click Start and wait.
That's it. You've got EB13 Release and clockwork preinstalled, rooted, and ready to use.To get into Clockwork, hold Volume Down Camera and Power to flash your own rom.
Enjoy!.
Extras
Legacy Items only:
Download for DK28: SPH-D700-DK28-Extended (ODEX Version)
Dowload for DK28: SPH-D700-DK28-Extended-D (Deodexed Version) **UPDATED
Download for DK17: SPH-D700-DK17-Extended
** Recovery can be accessed via adb reboot recovery, quickboot AND Rom Manager.
** ADB and unsigned zips turned off by default.
[/COLOR]
art3mis-nyc said:
** Just got your epic and wanna dive in?
** Wanna clean upgrade?
** Wanna just check it out?
** Want stock Froyo DK17 AND root AND Clockwork all from a single Odin flash?
Here ya go!
Thanks to:
- noobnl and Firon for the CW zImage from the 1click
- noobnl for odin
- skeeterslint,firon and bubby323 for the chats about it.
- Shabbypinguin for the system dump
- the mystery person who leaked DK17 Full.
- k0nane for the flashable dk17
A Jump start for new users:
DK17 Kernel
DK17 Modem
DK17 Filesystem
Latest Clockwork installed as 3button Recovery.
It is now zip aligned, pre-rooted, deodexed.
**FLASH AT OWN RISK**
It has been tested on my phone but it WILL overwrite everything(except SDcard of course so make a Nand)
Notable Fixes from the dk17 kernel are that the camera doesn't FC, lock-screen lag is gone and that Barcode Reader will work again!
Download: SPH-D700-DK17-Extended
Step 1. Boot your phone into download by powering off your phone holding 1 on the keyboard and holding power til you see the little Yellow digger.
Step 2. On your computer launch odin.exe and select the victory pit and under PDA select the SPH-D700-DK17-Extended.tar
Step 3. Plug in the usb cable.(if it's done right you should see a yellow Com device.)
Step 4. Click Start and wait.
That's it. You've got DK17 Release and clockwork preinstalled, rooted, zipaligned, deodexed and ready to use.To get into Clockwork, hold Volume Down Camera and Power to flash your own rom.
Enjoy!.
Click to expand...
Click to collapse
I was the tester and its working great
who is shabbypinguin?
shabbypenguin said:
who is shabbypinguin?
Click to expand...
Click to collapse
one to many penguins thats who!
Does gps work with version? Can't get gps to work with any dk17 rom
Sent from my SPH-D700 using Tapatalk
TheBurgh said:
Does gps work with version? Can't get gps to work with any dk17 rom
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I'm gonna say that it falls into the category of "works for me"
just go outside when you first launch maps(navigation/the gps button)
A good day
art3mis-nyc said:
I'm gonna say that it falls into the category of "works for me"
just go outside when you first launch maps(navigation/the gps button)
Click to expand...
Click to collapse
Wipe data and all caches before running odin. I already have dk17 on the phone
Sent from my SPH-D700 using Tapatalk
I would like top know if this wil make gps at least work without ising di18
Sent from my SPH-D700 using Tapatalk
adamw1101 said:
I would like top know if this wil make gps at least work without ising di18
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Instead of asking why not try, you're on a developer board, that more or elss means you're willing to mess with stuff to see if it works.
As i've said it works for me, your mileage may very so give it a shot and for gods sake READ THE FIRST POST as odin will wipe your phone(no sd just phone)
Thanks. This is a nice convenient time saver. Hopefully there will be one of these when the official froyo is released.
Sent from my SPH-D700 using Tapatalk
Cool stuff. Thanks for the nod.
Sent from my Epic
art3mis-nyc said:
Instead of asking why not try, you're on a developer board, that more or elss means you're willing to mess with stuff to see if it works.
As i've said it works for me, your mileage may very so give it a shot and for gods sake READ THE FIRST POST as odin will wipe your phone(no sd just phone)
Click to expand...
Click to collapse
geez sorry
Sent from my SPH-D700 using Tapatalk
thanks for this
Odin is hanging on boot.bin. I wish there was a way we could do all this via an update.zip, Odin is such a pain in the ass to work with.
gophergun said:
Odin is hanging on boot.bin. I wish there was a way we could do all this via an update.zip, Odin is such a pain in the ass to work with.
Click to expand...
Click to collapse
Always reboot pc before running odin and make sure you don't have pc studio running
Sent from my SPH-D700 using Tapatalk
Are we supposed to check Reboot and DebugEn? Or do we just leave it as is like the 1st post says? Because in the guide about using ODIN it says to check those
EDIT; My bad forgot that this is the new version of ODIN, so I guess we just follow the instructions
adamw1101 said:
Always reboot pc before running odin and make sure you don't have pc studio running
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Done, still having the same issue. I've never heard of PC Studio before looking it up now, so I presume it's not running, unless it's installed with the drivers or something. In any case, I'm gonna try uninstalling MSE and see if that makes a difference, but I've been screwing around with Odin and this half-bricked phone for two days now, so I don't have high hopes.
gophergun said:
Done, still having the same issue. I've never heard of PC Studio before looking it up now, so I presume it's not running, unless it's installed with the drivers or something. In any case, I'm gonna try uninstalling MSE and see if that makes a difference, but I've been screwing around with Odin and this half-bricked phone for two days now, so I don't have high hopes.
Click to expand...
Click to collapse
for odin 1.61(with the victory .pit) only check timereset and reboot
NOTHING else. with this rom.
make sure that you start odin first before connecting the usb(just to be sure)
and if you have issues, make sure that the usb is capable of the proper power, ie not through a hub, and disconnect non essential usb things.(mouse and keyboard are obviously essential)
if that fails try removeing the drivers fully, and reinstlal them with the phone plugged into a different port.
If you already have DK17 installed, can you wipe data and all caches and start from scratch. I can't get gps to work with DK17 or any rom
Sent from my SPH-D700 using Tapatalk
Related
Well since I got bored and wanted a PoC what we have here is....
**Neglected to include thanks...
- noobnl and Firon for the CW zImage from the 1click
- noobnl for the dk17 kernel and odin
- monopolykiller for the dk05 leak
- skeetslint,firon and bubby323 for the chats about it.
A Jump start for new users:
DK17 Kernel
DK05 File-system
DK05 Modem
Latest Clockwork installed as 3button Recovery.
It is not zip aligned, not pre-rooted, not deodexed and not compressed.
Included in the zip is Odin 1.3 with the Original Pit, because Odin 1.61 Hates this md5.
**FLASH AT OWN RISK**
It has been tested on my phone but it WILL overwrite everything(except SDcard of course so make a Nand)
Notable Fixes from the dk17 kernel are that the camera doesn't FC, lock-screen lag is gone and that Barcode Reader will work again!
Download: SPH-D700-DK05-Extended
Step 1. Boot into download by powering off your phone holding 1 on the keyboard and holding power til you see the little Yellow digger.
Step 2. On your computer launch odin.exe and select the pit and under PDA select the SPH-D700-DK05-Extended.tar
Step 3. Plug in the usb cable.(if it's done right you should see a yellow Com device.)
Step 4. Click Start and wait.
That's it. You've got DK05 files ystem and modem with a dk17 kernel and clockwork preinstalled so all you'd need to do is run z4root to root it OR hold down Vol Down, Camera and Power to get into clockwork to flash your own rom.
Enjoy!.
What are the benifits of this over just flashin in cwr?
Thanx in advance.
Its stock.
Sent from my Android using Tapatalk and Wifi/CDMA
Thank you... I was about to create my own, lol
It means instead of having to do all the boring stuff and flashing back to an older version you can odin flash this to as dangdang said "stock" and essentially start yer phone from a happy place without needing to screw with the 1click to get a rom loaded.
After doing this, how do we get a system dump?
same way as normal i'd guess. cept the modem isnt gonna flash because it's not properly signed like the di18 is(thats why it has to be odin flashed)
Essentially i just made this for simplistic fun, it lets you odin to "stock" and have CW again at first boot to flash whatever yer hearts content just by copying it to the SD .
art3mis-nyc said:
same way as normal i'd guess. cept the modem isnt gonna flash because it's not properly signed like the di18 is(thats why it has to be odin flashed)
Click to expand...
Click to collapse
I used to know how to do this, but could you refresh my memory?
Well seeing as how i keep forgetting to do so for myself(and have never done one).
http://androidforums.com/behold-2-all-things-root/54424-creating-custom-roms-backups-odin.html
Actually this post/thread is better: http://forum.xda-developers.com/showpost.php?p=8819675&postcount=26
Something along those lines i'd guess...
Does the gps work out of the box? I'm not having any luck with the dk05 rom and modem. Was going to try the flash di18, get gps lock, don't wipe, flash dk05 trick.
This would be a faster way for sure.
Well it works for me, your mileage may vary, but if you're already planning on flashing, i'm fairly sure the "give it a try and see" approach would be a good choice..
Odin is stuck at <ID:0/004> boot.bin
There is no progress bar, no indication anything happening. Should I battery pull and start over?
aestil said:
Odin is stuck at <ID:0/004> boot.bin
There is no progress bar, no indication anything happening. Should I battery pull and start over?
Click to expand...
Click to collapse
Same issue here. Pull the battery and use another file.
Every now and then I like to flash back to stock and start all over, so this is no big deal.
If you use the new odin 1.6 it does that which is why i included the 1.3, which shouldn't (or rather didnt for me)
Did it with Odin 1.3 and old .pit and it hung up.
Pulled the battery, tried again and got the same thing.
Switched to Odin 1.61 and new .pit and it went through. Strange, but who cares, it worked
By the way, thanks art3mis-nyc for putting this together as it makes starting all over absolutely painless!
I did get this flashed and it looks great thus far! But I do have the question, and I am sorry for asking this stupid one, what is 'z4root'? Or rather where do I find it?
Sent from my SPH-D700 using XDA App
mphillippi said:
I did get this flashed and it looks great thus far! But I do have the question, and I am sorry for asking this stupid one, what is 'z4root'? Or rather where do I find it?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
This is the easiest way to go about it.
http://forum.xda-developers.com/showthread.php?t=770388
z4root is an app in the market that lets you jailbreak your phone without using the one clicks or even having it hooked to a computer.
the 1click is rather pointless with this ass CW is already there, i didnt really make it as a rom to use, it's more a starting point to play with that has Clockwork already there to flash back one of the other roms(or a previous rom you used)
was the simplest way to get peoples feet wet with the idea of odin and saved a step
(that being flash with odin THEN 1click to get CW back to flash.) this way it's just 1 odin flash back to stock and CW is there ready to flash you to the newest rom.
Can this be used for a first flash of cwm on a stock epic or is it only for flashing back?
I am not responsible for brick phones. This method worked for me. If there is any confusion or something is not clear, ASK!
I see Kaik541 has a thread in Dev section for an ODIN version of KF1
http://forum.xda-developers.com/showpost.php?p=14782572&postcount=1
This is for those who want to flash and root from using the tar files.
I personally always remove my external memory and sim card before using odin. It is not needed as people will obviously post and neither is doing master clear. I do these steps just to make sure I eliminate any possible issues that can occur during flashing.
1) Download Firmware from http://www.samfirmware.com/WEBPROTECT-samsungusa.htm
2) Flash back to stock JF6 w/ odin one-click and did a master clear.
3) Flash Gingerbread KF1 using Odin (see image attached)
4) Flash fugu kernel http://forum.xda-developers.com/show....php?t=1010141 (I attached the zImage-root.tar to post if link does not work)
In the first post look for and select the download link in step 2: (credit to nikademus)
How to use:
1: Flash the stock rom
2: Download the image for Heimdall or for Odin
3: Flash it with either Odin or Heimdall
4: Boot once, it will install root and crash/shutdown (it is preferred to let the phone connected to usb so it does not loop boot)
5: Reflash the original kernel
5) Flash stock kernel (attached kernelKF1.7z) credit to lownox for helping me on that
6) Settings>Applications> enable Unknown Sources (AT&T finally got something right)
7) Install busybox from market
8) ENJOY!
thanks for the write up man
getting 404 on image link...
your links for steps 3, 4, and 5 don't work.
links working now
links worked for me
3. http://forum.xda-developers.com/showpost.php?p=14785219&postcount=75
4. http://forum.xda-developers.com/showthread.php?t=1010141
5. http://forum.xda-developers.com/showpost.php?p=14791212&postcount=116
Added more to the fugu step, let me know if I missed anything else.
Once someone gets this done, they should dump it, deodex it, then upload.
emuneee said:
Once someone gets this done, they should dump it, deodex it, then upload.
Click to expand...
Click to collapse
I want to do that but I haven't learn how to do anything beyond deodexed. I also still haven't had time to learn how to add "extras" like extended power menu or additional lock screens.
If someone wants to PM the instructions or a link to do so, I'll be happy to do and have it ready tomorrow.
Do we really need another Odin guide? Write one on heimdall. It's open source and actually maintained. It also has a lower brick rate.
AdamOutler said:
Do we really need another Odin guide? Write one on heimdall. It's open source and actually maintained. It also has a lower brick rate.
Click to expand...
Click to collapse
Honestly I have never used Heimdall and have never had an issue with ODIN. With that said I also have no objection if anyone wants to write up the parts for Heimdall here or by PMing me, I'll add to it the first post. I am not about to reflash again just to learn a new process when the old one has not given me a single issue.
made a deodex version, just dont know what to do with it
its not ready for flash or anything and its just deodexed using illdroid.
Doesn't matter anyways until we get CWM working...
nakedninja42 said:
made a deodex version, just dont know what to do with it
its not ready for flash or anything and its just deodexed using illdroid.
Doesn't matter anyways until we get CWM working...
Click to expand...
Click to collapse
care to share it?
nakedninja42 said:
Honestly I have never used Heimdall and have never had an issue with ODIN. With that said I also have no objection if anyone wants to write up the parts for Heimdall here or by PMing me, I'll add to it the first post. I am not about to reflash again just to learn a new process when the old one has not given me a single issue.
Click to expand...
Click to collapse
There's really nothing new to learn. It looks and loads almost exactly like Odin. Not sure what processes are different when you push the start button though. I'm not pushing heimdall, just conveying what i've seen with it. I used once to load the last Andro3.
Johnsondr80 said:
care to share it?
Click to expand...
Click to collapse
Ill try to upload it later tonight when I get back to my computer. Only thing I wanted to figure out before I did it is how to zipalign to make it smaller. I've tried apk manager in the past but that didn't work for me.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
nakedninja42 said:
Ill try to upload it later tonight when I get back to my computer. Only thing I wanted to figure out before I did it is how to zipalign to make it smaller. I've tried apk manager in the past but that didn't work for me.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
got mine deodexed. thanks tho
Loving this ROM stock and all. Has anyone seen if 3e recovery (I think its called) has been enabled yet for KF1? Id like to be able to flash stuff again. Alternatively if anyone has a method for flashing items via a program that would be great as well.
Cheers!
docflower said:
Loving this ROM stock and all. Has anyone seen if 3e recovery (I think its called) has been enabled yet for KF1? Id like to be able to flash stuff again. Alternatively if anyone has a method for flashing items via a program that would be great as well.
Cheers!
Click to expand...
Click to collapse
DG has made cog5 beta kernel 2 which supports CWM 4. Its stock kernel with CWM. Check the dev forum for cog beta 5 rom and grab the kernel in step 2.
Sent from my GT-P7510 using XDA Premium App
^^^ thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
Please see this new thread for up to date packages.
http://forum.xda-developers.com/showthread.php?t=1584346
DISCLAIMER:
The whole point of putting out Heimdall packages is to make flashing safer, faster and easier but please use some common sense and read before you wildly click on stuff. No one listed in this OP nor myself, God, Satan or any other being (Supreme deity or not) is responsible for what you do with these files. If you brick something, you did it, so man up and own your mistakes (and hopefully learn from them).
Epic Heimdall Packages:
The title should be self explanatory. Use these with Heimdall to flash your Epic back to stock or to flash CWM recovery. Do NOT re-partition unless you have an absolute good reason to (Like coming back from MTD and you know EXACTLY what you are doing). 99% of the time you will NOT need to re-partition.
Thanks to:
Nubecoder for putting these packages together
Drockstar and Rodderik for putting the purple CWM 3.1.0.1 together
Rodderik for hosting the devphone.org (Primary site and file mirror)
All I did was xfer some files and host the unlimited download server (files.devphone.org).
Heimdall Info and Download:
http://www.glassechidna.com.au/2011/devblogs/heimdall-suite-1-3-0-and-anti-squish-graphical-update/
http://www.glassechidna.com.au/2011/devblogs/heimdall-suite-1-3-1-released/
http://www.glassechidna.com.au/products/heimdall/
Primary Links (unlimited monthly xfer):
See New Thread
Mirror Links (limited monthly xfer, please use primary 1st):
See New Thread
Big thanks to insanity213 for hosting the files for me (would cause too much BW on my server).
Now everyone can stop using Odin!!!
NOTE:: The EI22 package does not include the ei22 modem.
Also, there are no bootloaders in these packages, so I do not think you should ever re-partition with these.
=]
nubecoder said:
Now everyone can stop using Odin!!!
Click to expand...
Click to collapse
THIS.
(ODIN sucks)
I never could get heimdal to recognize the epic when plugged into my imac although I haven't tried with lion. Supposedly this there was a secondary boot loader bug that got fixed on most galaxy s variants with froyo but we epic owners never got it. Works great on my PC though.
Sent from my SPH-D700 using Tapatalk
stilesja said:
I never could get heimdal to recognize the epic when plugged into my imac although I haven't tried with lion. Supposedly this there was a secondary boot loader bug that got fixed on most galaxy s variants with froyo but we epic owners never got it. Works great on my PC though.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I've got a late 2006 24" iMac kickin around the basement. I'll fire it up later on tonight and see if I can get it to roll.
so teh ei22 package will give a stock install, with no mods at all? and the modem is not included?
diptenkrom said:
so teh ei22 package will give a stock install, with no mods at all? and the modem is not included?
Click to expand...
Click to collapse
That is correct.
How come in the EI22 Package the pit file says EC05?
jtheking said:
How come in the EI22 Package the pit file says EC05?
Click to expand...
Click to collapse
the pit hasn't changed
jtheking said:
How come in the EI22 Package the pit file says EC05?
Click to expand...
Click to collapse
Rodderik said:
the pit hasn't changed
Click to expand...
Click to collapse
^ this.
Just a name, and FYI the pit was ripped from my phone with Heimdall.
=]
Are these files rooted or all they get rid of my root. I'm looking to go back to stock actually, so unrooted is preferable.
Also, is this Mac compatible?
Shadomastr said:
Are these files rooted or all they get rid of my root. I'm looking to go back to stock actually, so unrooted is preferable.
Also, is this Mac compatible?
Click to expand...
Click to collapse
No root, just stock.
=]
I've not once been able to get Heimdall to work on my windows xp machine, any suggestions?
Is this deodexed I'm looking for a stock rooted deodexed tar
Sent from my SPH-D700 using xda premium
So I'm running the deodexed "mostly stock" rom, and need to bring phone in for repair. Sorry, but I can't find a ton of info on Heimdall, and I just want to get stock rom and bootloader back on there before I get it fixed and get a new phone next month. So if I get into download mode, load up the SPH-D700_ripped_stock_EI22.tar file, and hit Flash > Start, then I'm good to go? Thanks to anyone who can help!
Digglez said:
Is this deodexed I'm looking for a stock rooted deodexed tar
Click to expand...
Click to collapse
They are not modified, so no, not deodexed.
pjnofrills said:
So I'm running the deodexed "mostly stock" rom, and need to bring phone in for repair. Sorry, but I can't find a ton of info on Heimdall, and I just want to get stock rom and bootloader back on there before I get it fixed and get a new phone next month. So if I get into download mode, load up the SPH-D700_ripped_stock_EI22.tar file, and hit Flash > Start, then I'm good to go? Thanks to anyone who can help!
Click to expand...
Click to collapse
The bootloaders are not contained in these packages.
I doubt your bootloaders have been changed though, to my understanding they haven't changed in a while (or ever).
The only other thing would be the modem...
I need to add the EC05 modem to the EI22 package, so it is a nice and easy to flash the delta update zip in cwm to get updated.
=]
nubecoder said:
They are not modified, so no, not deodexed.
The bootloaders are not contained in these packages.
I doubt your bootloaders have been changed though, to my understanding they haven't changed in a while (or ever).
The only other thing would be the modem...
I need to add the EC05 modem to the EI22 package, so it is a nice and easy to flash the delta update zip in cwm to get updated.
=]
Click to expand...
Click to collapse
I meant recovery, not bootloader. This should replace CWM with stock I'd imagine. I already have EI22 modem, wouldn't I want to keep that?
pjnofrills said:
I meant recovery, not bootloader. This should replace CWM with stock I'd imagine. I already have EI22 modem, wouldn't I want to keep that?
Click to expand...
Click to collapse
Yes it includes the stock recovery.
And yes you would want to keep the EI22 modem (since you already have it).
=]
Thank you for this. I finally got around to un-rooting / returning my wife's phone to stock. Now I can take it into the Sprint store. This should be the default method to return rooted phone to stock in the wiki, as it is quite easy if you follow the Heimdall instructions.
Can this be used to go back to BML from MTD instead of Odin? I'm guessing not since we can't repartition but wanted to make sure.
So i was following this guide http://forum.xda-developers.com/showthread.php?p=22169757#post22169757 and i ran Heimdall before i rooted the phone. It is stuck in a loop.
Am i screwed?
Please help.
You aren't screwed. What were you on before you flashed and what are you trying to flash?
ADD: You need to refresh your browser to see new responses
Was running stock and flashing FBis251's kernel
JaMoFo said:
Was running stock and flashing FBis251's kernel
Click to expand...
Click to collapse
Damn... wrong guide to follow being on stock.
Were you on Stock Froyo or Stock GB?
99% sure GB. Its my girlfriends phone, she got it 1 month ago. pretty sure it was all updated.
JaMoFo said:
99% sure GB. Its my girlfriends phone, she got it 1 month ago. pretty sure it was all updated.
Click to expand...
Click to collapse
Well you need to know . If you were on Froyo - you were flashing a GB kernel.
Since you don't know - you need to take the route of flashing GB with Bootloaders to be safe.
Go to this thread:
http://forum.xda-developers.com/showthread.php?t=1358498
Select and download:
Download SMS KJ6 (beta2d) Kernel Stock Rom with Bootloaders
Let me know when you have it and I can help you proceed.
10min left on the download. Thx for the help I'll buy you a few beers if we can pull this off
JaMoFo said:
10min left on the download. Thx for the help I'll buy you a few beers if we can pull this off
Click to expand...
Click to collapse
You will pull this off no problem. I have helped many people through this.
While you are waiting for the download - go ahead and do step one in that thead:
"Get the latest version of Java 1.6 from this link."
** Just so you understand - Froyo and GB have different bootloaders. If you were on Froyo and trying to flash GB without bootloaders - that is a problem. That is why - to be safe - you are downloading KJ6 WITH BOOTLOADERS so we know you will be good to go afterwards.
Java is all good and SMS KJ6 (beta2d) Kernel Stock Rom with Bootloaders is done downloading
If you prefer you can contact me on AIM (yosystmsux) or Gchat (mike.mauch),
JaMoFo said:
Java is all good and SMS KJ6 (beta2d) Kernel Stock Rom with Bootloaders is done downloading
If you prefer you can contact me on AIM (yosystmsux) or Gchat (mike.mauch),
Click to expand...
Click to collapse
Mike - I can do GChat if you need me to. However first - first learning purposes - read through this thread to get a better understanding of what you are about to do. Many people have commented that it is a step by step guide in a sense.
http://forum.xda-developers.com/showthread.php?t=1515319
Let me know after you have done so and any questions you may have.
I have read thru the guides how i begin to flash SMS KJ6 (beta2d) Kernel Stock Rom with Bootloaders?
I cant use superoneclick because the phone is looping.
JaMoFo said:
I have read thru the guides how i begin to flash SMS KJ6 (beta2d) Kernel Stock Rom with Bootloaders?
I cant use superoneclick because the phone is looping.
Click to expand...
Click to collapse
I didn't mean the guide - Fresh out of box - I meant the actual thread '[Q] Help me with DL for galaxy s4g battery life'. She flashed the same thing you are about to flash. Did you read that thread?
If so, let me know and we can get started.
And no - SuperOneClick is only for rooting. You are about to flash a Kernel, ROM and bootloaders to get your phone going.
OK i have read your [Q] Help me with DL for galaxy s4g battery life thread.
I have flashed ROMS before on my G1, G2, and my SGS2. I am familiar with download mode. I just made a dumb mistake.
JaMoFo said:
OK i have read your [Q] Help me with DL for galaxy s4g battery life thread.
I have flashed ROMS before on my G1, G2, and my SGS2. I am familiar with download mode. I just made a dumb mistake.
Click to expand...
Click to collapse
No worries... it was a good thread to read.
I ADVISE USING A USB PORT YOU HAVE NOT PLUGGED YOUR PHONE INTO YET FOR THIS!
- Get your phone in Download Mode
How to get into download mode:
Take your microUSB cable and plug it into the computer, but not the phone (yet).
Take out the battery from the phone.
Put the battery back into the phone.
Put the back cover back onto the phone, make sure it's snug so the battery doesn't fall out.
Hold vol + and -, keep holding them.
Plug the USB cable into the phone.
You should now be in download mode and should see a picture of a yellow triangle with Andy and a shovel in the middle.
- Run the Heimdall One-Click you downloaded using the directions in that thread:
Run: 'java -jar SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar'
Its idle and looks like this http://dl.dropbox.com/u/9655144/20120304_003443.jpg
JaMoFo said:
Its idle and looks like this http://dl.dropbox.com/u/9655144/20120304_003443.jpg
Click to expand...
Click to collapse
That is your bootloader issue. What have you done so far?
If you ran One-Click once - and got that - your were previously on Froyo. Pull the battery, go into download mode, and flash again - this time checking 'Flash bootloaders'.
Step 4: Run "flash" once. Let the phone reboot itself. Don't touch the phone until it boots into android. If it works and you want to flash bootloaders
- Put your phone into "Download Mode" again:
- Check the "Flash Bootloaders" checkbox and Run "flash" again to get bootloaders.
- Again, let it reboot fully into android.
I ran SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click
went into download mode
Pressed flash http://dl.dropbox.com/u/9655144/hem 1click.jpg
I am stuck at the colored screen
JaMoFo said:
I ran SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click
went into download mode
Pressed flash http://dl.dropbox.com/u/9655144/hem 1click.jpg
I am stuck at the colored screen
Click to expand...
Click to collapse
Ok... Read the post above yours.
Just a note - I will probably keep adding to previous post so refresh your screen so you can see my edits... as an example I just added my post above. Just so we are on the same page
Flash Bootloaders is greyed out. What am i doing wrong?
JaMoFo said:
Flash Bootloaders is greyed out? What am i doing wrong?
Click to expand...
Click to collapse
If it is greyed out start over. If your phone is showing connected. And you installed the Heimdall SGS4G drivers, and it says:
'SMS-KJ6 (v0.0.2d) Stock-Rom with Bootloaders UVKJ6 is ready for your device.'
Click flash.
Let it run until your phone reboots. After it reboots you should boot into CWM. If not just wait a few seconds. Then pull your battery. Leave One-Click OPEN through this, put your phone in download mode, One-Click should recognize it and you should be able to check flash bootloaders. If so - flash again.
Hello Heimdall Lovers.
Here is a good comment. LINK
You have no idea what Heimdall is?
Here is a good explanation: Heimdall
Here is the pioneer: Benjamin Dobell
How do you use Heimdall? Here are two links:
Linkie #1
Linkie #2
Still don't know? Try this: GOOGLE
Type in: how to use heimdall or how to install heimdall drivers.
What is a Heimdall-1-click? Here is the guy responsible for it: Adam Outler.
Now that we have gotten that out of the way, I have put together a few Heimdall-1-click packages that I will share with you.
FIRMWARE UCKE3
Yup..this is the FROYO Firmware package based on gtg465x
It is re-packed in a Heimdall-1-click:
LINK TO FIRMWARE - - - - - FIRMWARE LINK #2
What else would one need besides the wonderful UCKE3 firmware?
Why, the froyo community kernel that will root it and gives you cwm recovery of course!
FROYO COMMUNITY KERNEL. - - - - - FROYO LINK #2
Well? What the heck is this good for?
I'm glad you asked.
1. If you wanted to return a semi-borked device and you wanted to set it back to official firmware.
2. Some people are still in love with stock froyo and have no idea how to use Odin.
3. Some people are stuck on using the old modded 3e recovery method.
4. Some people just wanted to use SuperOneClick to root a phone.
5. Some people may want to run lost1's unlock code to get the unlock code that only works on FROYO.
6. You're bored and have nothing better to do with your time.
How do you use this stuff?
1. If you are on a ROM with a recovery, boot into cwm and do a factory reset/data wipe. Go to mount menu: format system, data and cache.
2. Turn off the phone.
3. Run the Heimdall-1-click on your computer.
4. Put the phone into download mode.
5. Install the drivers for heimdall if you have not done it yet.
6. Flash the ROM.
7. If it is done and did not reboot but you see the recovery screen, perform a factory reset and data wipe and reboot into FROYO land.
8. If you wanted to have a red recovery, instead of superoneclick, modded 3e or what other method, shut your phone off. Put it back in download mode. Flash the community kernel. It will auto conversion to voodoo file system, EXT4 and root the UCKE3 and gives you a red recovery to flash or your or whatever you want. Neat huh?
Helpful hints:
Can't get heimdall to work? Try a different PC, Laptop, different USB port or a different data cord.
Credits:
1. Benjamin DoBell - Heimdall
2. Adam Outler - Heimdall-1-click
3. Gtg465x - the UCKE3 firmware that he got from Samsung.
4. Gtg465x - the froyo community kernel.
5. Zen Arcade - for asking about this froyo package.
For me, you can click the THANK button.
For the others, they have their donation buttons. It's a great way to show appreciation. At the very least, please visit the link and slap a thank you just for using their work.
[HEIMDALL] UCLB3 STOCK ROOTED DEBLOATED and ENTROPY's 4.4.2012 KERNEL
What the heck! Isn't this redundant?
Yup..sure is!
I know that jscott30 has already posted a method for rooting the UCLB3. However, it is Odin. Ewww...
Here is a Heimdall-1-click method:
1. Install UCLB3 FIRMWARE from my UCLB3 Thread:
2. Put your phone into download mode.
3. Flash Entropy's 4.4.2012 kernel - - - -- - Mirror #2
This will automatically convert your factory rfs files system into EXT4 -voodoo file system. You will here a lady-like robotic voice. Takes 5 minutes. Then it will reboot into the ROM.
4. Boot into CWM.
5. Flash this package: ROOT THE UCLB3 - also at bottom of page.
This cwm-flashable package will install busybox, su and Superuser.apk. It will then delete ATT's crap. (See bottom of page). Then it will install Google Talk with video support. Neat, huh?
5. Factory reset and data wipe just to be sure.
6. Reboot. Done.
7. FYI - Since many other ATT Galaxy devices may contain the similar bloats, I would think that flashing this script will root (busybox, su and superuser.apk) other devices as well - after you are able to get cwm by flashing a kernel.
However, if you are not a tinkerer, and just wanted it done for you.
Here is another package:
THIS IS FLASHED IN DOWNLOAD MODE: It's a HEIMDALL-1-CLICK
UCLB3 -DEBLOATED-ODEX - ROOTED - BUSYBOX- STOCK KERNEL
How to use: Just put your phone into download mode.
Flash the Heimdall-1-click package. Done.
Factory reset to clear any old data if needed.
Enjoy the rooted package.
I actually ran this odexed rooted version for several days. It is pretty good. It is rock stable.
What's the catch? Well, you need to unzip the vold.zip file at the bottom attachment and paste it into /system/etc in order to access the external microSD card. Check the Vagabond or the Deodexed UCLB3 thread if you don't understand.
Important: Don't use my ROOT package if you wanted the ATT bloats to stay!
If you know how to change edify to suit your taste, you are welcome to do so.
The deleted stuff:
2.8.1_YP_38384.apk
androidlauncher_Generic_android2.2-72x72_build_1_1D2011_03_16t09_30.apk
AT_T_code_scanner_vpl_1.1_aligned.apk
BooksPhone.apk
BuddiesNow.apk
BuddiesNow.odex
com.mobitv.client.tv.apk
Days.apk
Days.odex
Dlna.apk
Dlna.odex
DualClock.apk
DualClock.odex
MediaHub.apk
MiniDiary.apk
MiniDiary.odex
myATTVPL_aligned.apk
Telenav.apk
WISPr_55_Android22.apk
TetheringManager2.apk
wssyncmldm.apk
wssyncmldm.odex
wssyncmlds.apk
wssyncmlds.odex
wssyncmlnps.apk
wssyncmlnps.odex
Credits:
Przekret for the UCLB3 leak
Entropy512 for the wonderful kernel with video fix.
Chainfire for su and Superuser.apk
Adam Outler for the Heimdall-1-click
Benjamin DoBell for Heimdall
Zen Arcade - testing, teaching and support.
[HEIMDALL] jt1134 ICS KERNEL
You like ICS?
You want to try CM9?
You have no clue?
Well, I'm not sure either. I haven't tried it yet.
I hear that are are some kinks that needed to be worked out yet.
Here is jt1134's kernel
It is packaged in, you guessed it, a Heimdall-1-click.
jt1134 KERNEL - - - - KERNEL LINK #2
How to use:
1. On any ROM...however, it's best if you have just heimdalled the UCLB3, UCKJ4 or if you have Odined any of the later GB leaks.
2. Put your phone in download mode.
3. Do you need root? NO!
4. Do you need 3e? NO!
5. Just flash the Heimdall-1-click. You then have jt's kernel, packed into the kernel (bml7) and recovery (bml8) and you now pwnt cmw 5.xxx.
6. Boot into recovery. It's gonna be a different blue.
7. Follow directions on how to flash ICS/CM9
Credits:
1. jt1134 for his pioneer work on the kernel that gave us a taste of CM9.
2. Adam Outler for the Heimdall-1-click.
notes: I did prepare a package with the bootloaders and the kernel, but with all the warnings about bootloaders, I've decided that it is best if you seek out a way to bork your own phone instead of me making it too easy for you to bork your device and whine about it later.
Zen Arcade's GB Kernels In Heimdall-1-Click Flavors
http://forum.xda-developers.com/showpost.php?p=23118162&postcount=3
Again thanks for your many efforts.....this will come in handy as did/does all your work...
Thx
bigjoe2675 said:
Again thanks for your many efforts.....this will come in handy as did/does all your work...
Thx
Click to expand...
Click to collapse
Joe did you put this in your thread yet?????
Sent from my SAMSUNG-SGH-I997 using xda premium
Qkster
As always you are a HUGE benefit to this community. EVERYONE should be hitting your thanks button. :thumbup::thumbup::thumbup::thumbup::thumbup:
Sent from my SAMSUNG-SGH-I997 using xda premium
oldbbman said:
Joe did you put this in your thread yet?????
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Not yet sir....been doing my updates on Fridays/Saturdays....but this may warrant a pre-strike...:thumbup:
qkster said:
I know that jscott30 has already posted a method for rooting the UCLB3.
Click to expand...
Click to collapse
Options are good, Bro. Great work!
qkster said:
However, it is Odin. Ewww...
Click to expand...
Click to collapse
Heimdall really is a good alternative to Odin. Not sure why some people act allergic to having to install that libusb driver. Now we have plenty of options for folks who prefer one tool over the other, or like in my case, use both.
Again, great work!
bigjoe2675 said:
Not yet sir....been doing my updates on Fridays/Saturdays....but this may warrant a pre-strike...:thumbup:
Click to expand...
Click to collapse
Warp factor 10 Mr. SULU!
Sent from my SAMSUNG-SGH-I997 using xda premium
oldbbman said:
Warp factor 10 Mr. SULU!
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Warp factor 10, aye aye sir....! Sir we have engaged....holding steady at Warp 10.
Done....and Done!
Hello, what all this then?
Nice job as always Qkster. Any thought to adding a link to Entropy's cm9 under that post since there are two versions of it? Just a thought.
Qkster is Jwel of this forum
ppalbicke said:
Hello, what all this then?
Nice job as always Qkster. Any thought to adding a link to Entropy's cm9 under that post since there are two versions of it? Just a thought.
Click to expand...
Click to collapse
Yup. Will add that. I had assumed that one only needed to be on cwm 5.xxx ICS kernel as a starting point and the ROM will flash its own kernel. But I'll add that option as well.
qkster said:
Yup. Will add that. I had assumed that one only needed to be on cwm 5.xxx ICS kernel as a starting point and the ROM will flash its own kernel. But I'll add that option as well.
Click to expand...
Click to collapse
Awesome job as always, will be very handy
Sent from my SGH-I997 using xda premium
Wow, really nice, qkster! Lots of great stuff and info here. Thank You!
This is beyond amazing
You are awesome QKSTER
My phone wont let me click thanks twice
Sent from my SAMSUNG-SGH-I997 using XDA
isaiahe97 said:
This is beyond amazing
You are awesome QKSTER
My phone wont let me click thanks twice
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
I appear to be having the same problem............ Qkster tell me why!!!!
Epic work.. like always... tinkerer...
Sent from my A500 using Tapatalk 2
You're the best Q... God bless you...
Sent from my SAMSUNG-SGH-I997 using xda premium
ppalbicke said:
Any thought to adding a link to Entropy's cm9 under that post since there are two versions of it? Just a thought.
Click to expand...
Click to collapse
Hey, ppal.
I checked Entropy's CM9 thread and download the CM9 build.
The flashing techniques for CM9 only require cwm recovery. There isn't a preloaded kernel like jt's build.
Entropy's intructions were to Flashed twice from a red recovery.
The ROM structure also appears different. There's a boot.img but there isn't a kernel per se.
If there was a kernel like zImage, I can pack it but there isn't one that I can work with from what I know.
I think from any ROM, flashing jt's kernel in DL mode and getting CMW 5.xxx will let you flash Entropy's CM9 also.
As an aside, has anyone used any of these packages? Do they work? Issues? Thanks