First-time MT3G 32b rooter stuck at hanging splash screen help please? - Android Software/Hacking General [Developers Only]

Hi everyone I'm a first-time rooter and at this point my Mytouch3g is stuck at the green Mytouch3g Splash screen
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
I have(had) a Mytouch3G running Stock Froyo from OTA and used SuperOneClick to Root. Then got ClockworkMod recovery via the app on the market.
I then followed the steps in the cyanogenmod wiki
1. Download the latest version of CyanogenMod.
* Optional: Download the corresponding Google Apps for the phone.*
* Magic32A / Roger's / Orange ONLY: Download the latest version of the EBI1 kernel.
Note: This does not apply to Magics with 3.5mm jacks.
2. Place all the files you downloaded on the root your phone's SD card
3. Reboot into recovery (Hold Home + Power)
4. If you want, perform a full Wipe (wipe->factory reset)-- this will sometimes prevent various issues, but at the cost of all your data/settings/etc.
5. If you don't perform a full wipe, it is recommended to clear the dalvik-cache (wipe->dalvik-cache).
6. Select "Flash zip from sdcard".
7. Select the CM update.zip
8. Magic32A / Roger's / Orange Only: Once installation is complete, select "Flash zip from sdcard" again, then
Select the EBI1 update.zip
9. Optional: Once installation is complete, select "Flash zip from sdcard" again, then
Select the Google Apps update.zip
10. Once complete, reboot your phone
11. The first boot after flashing a new ROM will be substantially longer than "normal". 5 minutes is not unusual.
Click to expand...
Click to collapse
I did Step #2 (I'll explain how, I may have done that incorrectly) and got stuck after trying to reboot into Recovery Mode (Home + Power), where it just hangs.
Step #2 I downloaded "update-cm-6.1.0-RC1-DS-signed.zip" and EXTRACTED the files onto my desktop and THEN copied those extracted files to the root folder of my SD card... That may have been my mistake.
I'm currently using another phone to access the SD card and then just dump the .zip file i downloaded into the SD and try loading that again... I will update soon after this post whether that chnaged anything.
Right now the Mytouch3G bootloader is the only thing that runs but when I Fastboot, it just says it cna't find the image files and brings me back to the bootloader menu.
Wish me luck. if you have any input please share- it would help me immensely.
Thank you!!

Related

Root your MyTouch Easy Step by Step Instructions

I know that a lot of you out there are like me and not a computer programmer. I am sure that I am not the first person to post something like this but I know that this is going to be the easiest.
To start you will need a formatted MicroSD Card (any size will do). If you do not have a spare MicroSD card, backup all your files on your current MicroSD Card to your PC then format it using your computer.
Also your MyTouch must be running on 1.5 (cupcake) software. If your MyTouch is not running on 1.5 (cupcake) go to this site to downgrade your phone to 1.5 (cupcake) http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
I know there are a lot of steps but it will take less then 10 minutes.
If links do not work copy and past in browser window
Steps:
1. Download this file “flashrec-1.1.2-20090909.apk” from this link http://code.google.com/p/flashrec/ (the file is on the right hand side of the screen) to your PC.
2. Download this file “cm-recovery-1.4.img” http://n0rp.chemlab.org/android/cm-recovery-1.4.img (click on link and save file) to your PC.
3. Copy both files to your formatted MicroSD Card.
4. Go to Android Market download and install “Linda File Manager”.
5. Go to “Setting” on your MyTouch
6. Go to “Applications”
7. Check “Unknown Sources” (this will allow you to install programs not from the Market)
8. Go to “Linda File Manager”
9. Go to “SD Card”
10. Click on “Linda File Manager” (when the pop up window appears)
11. Click and Run “flashrec-1.1.2-20090909.apk”
12. Click on “Backup Recovery Image” (once Backup Recovery Image is done move on to next step)
13. Clear out the text box and type in “/sdcard/cm-recovery-1.4.img"
14. Click on the “Flash Custom RecoveryImage” button (once Flash is
done move on to next step)
15. Click on “Home” button
16. Turn MyTouch off
17. Hold down the “Home” and “Power” button (keep holding it down until you see a Black screen with Green fonts)
18. If on the bottom of the screen you see “Build: CyanogenMod v1.4 +
JF” in White Font you have successfully Rooted you MyTouch
*if you interested in loading a custom ROM please continue. I recommend CyanogenMod. They are the best and it work well.
*this will result in a complete memory wipe. None of your existing data or installed software will be left.
19. Scroll down to and select “nandriod v2.2 backup”
20. Click on “Home” Key to continue (by doing this you have created a backup file that you can restore if something goes wrong)
21. Scroll up to “reboot system now”
22. Download “update-cm-4.2.5-signed.zip” from this link: http://n0rp.chemlab.org/android/update-cm-4.2.5-signed.zip (save the file when the pop up window appears)
23. Download “HTC_ADP_1.6_DRC83_rooted_base.zip” from this link: http://www.androidspin.com/downloads.php?dir=enomther/ROM/&file=HTC_ADP_1.6_DRC83_rooted_base.zip
24. Copy the downloaded files to your MicroSD Card.
25. Turn off Phone
26. Hold the “Home” and “Power” until you get to the screen with Black background and green font.
27. Scroll down to “wipe data/factory reset”
28. Click on “Home” Key (once wipe is down move on to next step)
29. Scroll up to “apply any zip from sd”
30. Select “HTC_ADP_1.6_DRC83_rooted_base.zip”
31. Click on “Home” Key (once install is done move on to next step)
32. Scroll up to “apply any zip from sd”
33. Select “update-cm-4.2.5-signed.zip”
34. Click on “Home” Key (once install is done move on to next step)
35. Scroll down to “wipe data/factory reset”
36. Click on “Home” Key (once wipe is down move on to next step)
37. Click on “reboot system now” (reboot will take longer then usual
due to new install)
38. Once reboot is complete your done.
I would recommend that you go to the Andriod Market download and install an Overclock program. It will improve the performance of your MyTouch.
Any question email me at [email protected]
nice
milelake2 said:
I know that a lot of you out there are like me and not a computer programmer. I am sure that I am not the first person to post something like this but I know that this is going to be the easiest.
To start you will need a formatted MicroSD Card (any size will do). If you do not have a spare MicroSD card, backup all your files on your current MicroSD Card to your PC then format it using your computer.
Also your MyTouch must be running on 1.5 (cupcake) software. If your MyTouch is not running on 1.5 (cupcake) go to this site to downgrade your phone to 1.5 (cupcake) http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
I know there are a lot of steps but it will take less then 10 minutes.
If links do not work copy and past in browser window
Steps:
1. Download this file “flashrec-1.1.2-20090909.apk” from this link http://code.google.com/p/flashrec/ (the file is on the right hand side of the screen) to your PC.
2. Download this file “cm-recovery-1.4.img” http://n0rp.chemlab.org/android/cm-recovery-1.4.img (click on link and save file) to your PC.
3. Copy both files to your formatted MicroSD Card.
4. Go to Android Market download and install “Linda File Manager”.
5. Go to “Setting” on your MyTouch
6. Go to “Applications”
7. Check “Unknown Sources” (this will allow you to install programs not from the Market)
8. Go to “Linda File Manager”
9. Go to “SD Card”
10. Click on “Linda File Manager” (when the pop up window appears)
11. Click and Run “flashrec-1.1.2-20090909.apk”
12. Click on “Backup Recovery Image” (once Backup Recovery Image is done move on to next step)
13. Clear out the text box and type in “/sdcard/cm-recovery-1.4.img"
14. Click on the “Flash Custom RecoveryImage” button (once Flash is
done move on to next step)
15. Click on “Home” button
16. Turn MyTouch off
17. Hold down the “Home” and “Power” button (keep holding it down until you see a Black screen with Green fonts)
18. If on the bottom of the screen you see “Build: CyanogenMod v1.4 +
JF” in White Font you have successfully Rooted you MyTouch
*if you interested in loading a custom ROM please continue. I recommend CyanogenMod. They are the best and it work well.
*this will result in a complete memory wipe. None of your existing data or installed software will be left.
19. Scroll down to and select “nandriod v2.2 backup”
20. Click on “Home” Key to continue (by doing this you have created a backup file that you can restore if something goes wrong)
21. Scroll up to “reboot system now”
22. Download “update-cm-4.2.5-signed.zip” from this link: http://n0rp.chemlab.org/android/update-cm-4.2.5-signed.zip (save the file when the pop up window appears)
23. Download “HTC_ADP_1.6_DRC83_rooted_base.zip” from this link: http://www.androidspin.com/downloads.php?dir=enomther/ROM/&file=HTC_ADP_1.6_DRC83_rooted_base.zip
24. Copy the downloaded files to your MicroSD Card.
25. Turn off Phone
26. Hold the “Home” and “Power” until you get to the screen with Black background and green font.
27. Scroll down to “wipe data/factory reset”
28. Click on “Home” Key (once wipe is down move on to next step)
29. Scroll up to “apply any zip from sd”
30. Select “HTC_ADP_1.6_DRC83_rooted_base.zip”
31. Click on “Home” Key (once install is done move on to next step)
32. Scroll up to “apply any zip from sd”
33. Select “update-cm-4.2.5-signed.zip”
34. Click on “Home” Key (once install is done move on to next step)
35. Scroll down to “wipe data/factory reset”
36. Click on “Home” Key (once wipe is down move on to next step)
37. Click on “reboot system now” (reboot will take longer then usual
due to new install)
38. Once reboot is complete your done.
I would recommend that you go to the Andriod Market download and install an Overclock program. It will improve the performance of your MyTouch.
Any question email me at [email protected]
Click to expand...
Click to collapse
nice n easy big guy..
good job..
very very good job!
i have a little problem, i put in my sdcard flashrek.apk, recovery-RA-dream-v1.2.3.img, and cm-recovery-1.4.img, after success intalled the flashrecovery.apk, i click on "backup recovery image" a dont work, but write this message, "backup failed: could not run command."
i arrived on the step "12" and i have this problem....how i can resolve?
before to proceed with this guide i've formatted the sdcard....
my htc its magic vodafone 32B android donut 1.6, Hboot-1.33.0007
Radio-2.22.19.26I, CPLD-10
thank's in advance for help
Ill write you an app for this if you pay me Sniggers.....
i shall soon be having a rooting method in my software for mytouch
hi reedmdc, but im not understand your msg.....i pay you to root my magic with your software?...or what?..please explain me...thank' s...
iaio72 said:
very very good job!
i have a little problem, i put in my sdcard flashrek.apk, recovery-RA-dream-v1.2.3.img, and cm-recovery-1.4.img, after success intalled the flashrecovery.apk, i click on "backup recovery image" a dont work, but write this message, "backup failed: could not run command."
i arrived on the step "12" and i have this problem....how i can resolve?
before to proceed with this guide i've formatted the sdcard....
my htc its magic vodafone 32B android donut 1.6, Hboot-1.33.0007
Radio-2.22.19.26I, CPLD-10
thank's in advance for help
Click to expand...
Click to collapse
If you are running 1.6 you have to downgrade to 1.5. Please read the first couple of paragraphs to downgrade. It is easy.
When can we root the official SenseUI please?
milelake2 said:
If you are running 1.6 you have to downgrade to 1.5. Please read the first couple of paragraphs to downgrade. It is easy.
Click to expand...
Click to collapse
not is easy to downgrade to 16.......>to 1.5......
izzit so hard to downgrade? just flash any cupcake will do.. why izzit so hard?
limkoksoon said:
izzit so hard to downgrade? just flash any cupcake will do.. why izzit so hard?
Click to expand...
Click to collapse
yes please, but where i find the original ruu rom vodafone 1.5 cupcake to flash it?
thanks
this ROM its good for my magic 32b voda?
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver
thanks
limkoksoon said:
izzit so hard to downgrade? just flash any cupcake will do.. why izzit so hard?
Click to expand...
Click to collapse
the problem its i dont have root...and i cant flash somes rom,,,i can flash only original, i think,,,
iaio72 said:
this ROM its good for my magic 32b voda?
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver
thanks
Click to expand...
Click to collapse
NO!
Updates in RUU-format are compatable ONLY with 32A Magics
5[Strogino] said:
NO!
Updates in RUU-format are compatable ONLY with 32A Magics
Click to expand...
Click to collapse
thanks for answer
Thank you so much
Will this work for HBOOT-1.33.0006 (SAPP30000) ?
As bad as it is. .. .Me and you are in the same page. The only problem is that I already bricked my first NTT DOCOMO HTC MAGIC(Later on converted to MT3G before I bricked it). Right now, I finally got a replacement from DOCOMO however, those punks came updated the fw already when they give me the replacement. I manage to root my fone via gold card then unrooted again thanks to unlockr.com but then I got caught up messing with the terminal. Just like that my phone just went away. I have a perfected SPL .000006 and with fw of 1.6. This punks keep saying its so easy, I think they're full of crap. Instead of just throwing garbage at you why not be specific in what they talking about. I have tried to load all kinds of recovery images on this thing but no joy. Donut actually has a built in recovery image ( I think it only has like four options, which are purely useless) One last thing that I need to try is probably go back to gold card method but the problem is I havent seen a single one perform this act. Again, I am coming from a stock perfected SPL .00006/official fw 1.6. If you guys can be kind enough to at least lead us the right way, Im pretty sure that we'll handle the rest. Please no garbage reply. Thank you.
i just used this tutorial to root and install MLIGN's HERO 3.0 on my brother's mytouch and it worked great the first time!
thanks!
rlee
VerY good Post I this need to be in the Wiki....
Ok, that worked, but need a little help from anyone.
I followed these instructions on my MyTouch 3g and did also install the suggested ROM.
However, after installing the rom I realized there are more recent releases out there. If I wanted to install a newer rom do I have to redo each step?
I have CyanogenMod-4.2.13 and update-cm-4.2.13-signed on my spare SD card.
Another question I had (which maybe irreverent at the moment...) after step 17 I did see '“Build: CyanogenMod v1.4 +JF” giving me root access. However, when I did try to install and launch a overclock utility that requires root, it said I do not have root access. Am I missing something?

[HOW-TO]Rogers Updating your radio if "you're already rooted"

(removed --> see post #2)
WARNING: This tutorial is for RogersDream users only! It does not apply to G1/dream users. If your wireless telephone carrier is not Rogers, this tutorial is not for you!
This how-to/tutorial's intent is to provide clear/safe/concise steps for Rogers users to keep root, update to the latest RogersRadio & Build and get your data connection back from Rogers, while keeping your root! Since I do not want to dis-rotate on the various potential setups you may or may not have currently installed, this is a start-to-finish guide. Meaning, this guide will work, so long as you are ALREADY ROOTED! If you're not already rooted, <this apparently is not solved yet, sorry>).
The only other note I'll make is that if you currently already have the latest RogersRadio installed (3.22.26.17), the ENG-1.33.2005-SPL and a testkeys recovery image (Amon_RA's 1.5.2R preferred) you may directly proceed to installing a rooted/custom ROM made specifically for EBI1 device layouts.
In order to determine what your RogersDream currently has installed on it, perform the following.
1) Determine Radio & SPL Version.
- PowerOff your phone.
- Press and Hold your Camera button and tap the power button, this will load the bootloader.
- Read the versions, if you see "RADIO-3.22.26.17" and "HBOOT-1.33.2005", then you have the proper radio/spl, if not, perform the steps in this guide.
2) Determine Recovery Image Version.
- PowerOff your phone.
- Press and Hold the Home button and tap the power button, this will load the recovery image.
- If you see "Build: RA-dream-v1.5.2R" at the bottom of your screen, you have the correct recovery image. If you see a Triangle with an "!" mark or you see nothing at all after the Rogers SPLASH SCREEN, perform the steps in this guide.
General Step Sections
1) Backup your phone and sdcard, just to be safe!
2) Charge your battery fully!
3) Gather/Download the prerequisite files/tools, check the MD5's, unpack and copy to your sdcard.
4) Downgrade your RogersDream to gain root and ensure proper EBI1 setup/layout.
5) Install flashrec to install Amon_RA's 1.5.2R recovery image.
6) Upgrade/Convert your SPL to 1.33.2005 ENG, to ensure root going forward.
7) Install Rogers latest Radio Update, version 3.22.26.17.
8) Confirm everything updated correctly.
9) Install Custom/Rooted ROM w/EBI1 kernel support.
THE GUIDE
Section 1) Backup your phone and sdcard, just to be safe!
a) Seriously do this! Backup whatever you deem necessary on the phone, however you see fit. This guide is not meant to walk you through this process. One suggestion though, if you're currently rooted, perform a nandroid backup in recovery, then backup all of your sdcard's contents to a computer. If you need help with this step, search around. If that doesn't help, then perhaps rooting (or this guide) is not for you, perhaps.
Section 2) Charge your battery fully!
a) Seriously do this! Just make sure you have well over 90% battery charge, just to be 100% safe. Also make sure you're battery is very secure during this process, meaning never pull the battery and if you know that your battery is prone to falling out or something like that, fix it somehow b/c you don't want it falling out during this process, k? Nuf Said.
Section 3) Gather/Download the prerequisite files/tools, check the MD5's, unpack and copy to your sdcard.
a) You're going to need adb setup and functioning for section #5, in order to install flashrec w/out a data connection. You *may* be able to get installed via wifi, by downloading it directly from the internet, but don't count on this!!! I will only cover the adb method in this how-to. So get adb installed on your computer and test/make-sure it functions before following this guide! If you don't get adb tested/installed before going through with this guide, you'll be stuck at section-#5 until you do! If you need help with this step, search around. There is plenty of information on xda for getting adb setup and tested.
b) Download this ZIP file, check it's MD5 checksum and make sure it matches the one in this post! If it matches, great!, unpack the contents and copy them to your phone's sdcard. If it doesn't match, redownload the ZIP file. You will need approxiately 114MB of freespace on your phone's sdcard for the unpacked contents.
Rogers_RootUpdate_SDCARD_files.zip
MD5: 013ed64ca02dbebb5e49a8a8474bebe1
I) Files in the zip that need to be copied to your phone's sdcard are ...
--- DREAIMG.nbh
--- ar152r-rec.img
--- rogers_radio_3.22.26.17_update.zip
--- rogers_spl_1.33.2005_update.zip
c) Download this flashrec.apk, check it's MD5 checksum and make sure it matches! Keep this handy on your computer to install with adb later.
flashrec.apk
MD5: 4634f88b8dfdb2332b447c0d85ff4bb6
Secion 4) Downgrade your RogersDream to gain root and ensure proper EBI1 setup/layout.
a) PowerOff your phone.
b) Press and Hold the Camera button and tap the Power button, this will boot into the bootloader.
c) At this point the bootloader should automagically detect the presence of DREAIMG.nbh on the sdcard and prompt you to "update" your phone with the message, "Do you want to start update?". It should say "<ACTION> Yes" and "<POWER> No". Press the rollerball in (this is the action button) to begin the update.
d) The update process will begin (really a downgrade to version 146733-1.85.631.5) ... it will go through the update process, wait till this process is 100% finished! You will be prompted once it is finished, with a reboot prompt with a similar "<ACTION> YES" and "<POWER> NO" prompt. Go ahead and reboot by pressing the rollerball.
e) You are now downgraded and ready to root.
Section 5) Install flashrec to install Amon_RA's 1.5.2R recovery image.
a) Once your phone is booted up, skip through the setupwizard by hitting the series of skip and next buttons.
b) Go into Settings, Applications and check the box for "Unknown sources", press 'OK' at the prompt.
c) Then press the "Development" button and check the box for "USB debugging".
d) Plug your phone into your computer via the USB cable.
e) Install flashrec.apk via adb with the command "adb install flashrec.apk". You should receive a success message and be able to confirm that "Recovery Flasher" is installed by viewing the phone's apps now.
f) Launch the "Recovery Flasher" app.
g) If there is a URL in the textedit box, remove (backspace it) completely. And enter the following
Code:
/sdcard/ar152r-rec.img
This should change the "Download Recovery Image" button into the "Flash Recovery Image" button. If not, make sure you typed the above properly and have that file on your sdcard.
h) Now press the "Backup Recovery Image", which will backup the original image, once it's complete the "Flash Recovery Image" button will enable itself.
i) Press the "Flash Recovery Image" button, which will install Amon_RA's v1.5.2R recovery image. Let it finish, you now have a rooted recovery image installed. Proceed to section-#6.
Section 6) Upgrade/Convert your SPL to 1.33.2005 ENG, to ensure root going forward.
a) PowerOff your phone.
b) Press and Hold the Home button and tap the power button, this will load Amon_RA's recovery image.
c) Use the rollerball to scroll down the "[Alt+F] Flash zip from sdcard" option and press-in on the rollerball.
d) You should see an entry in the list labeled "SDCARD:rogers_spl_1.33.2005_upd", roll the rollerball over this to highlight it and press-in on the rollerball.
e) You will prompted to confirm your selection, ensure the prompt says "SDCARD:rogers_spl_1.33.2005_update.zip" and if so, press the Home button to confirm.
f) It will flash through quickly with a message indicating "Extracting hboot image ..." and then a message saying "Reboot via home+back or menu to complete installation".
g) The rollerball will already have the top option highlighted "[Home+Back] Reboot system now", press in the on the rollerball. You should quickly see "writing hboot image ..." on the bottom ... followed by a quick reboot showing an "HTC" logo ... followed by another reboot which returns to Amon_RA's recovery. Proceed to section-#7.
(SEE POST #3 for Next Steps)
Section 7) Install Rogers latest Radio Update, version 3.22.26.17.
a) Use the rollerball to scroll down the "[Alt+F] Flash zip from sdcard" option and press-in on the rollerball.
b) You should see an entry in the list labeled "SDCARD:rogers_radio_3.22.26.27_", roll the rollerball over this to highlight it and press-in on the rollerball.
c) You will prompted to confirm your selection, ensure the prompt says "SDCARD:rogers_radio_3.22.26.27_update.zip" and if so, press the Home button to confirm.
d) It will flash through quickly with a message indicating "Extracting radio image ..." and then a message saying "Reboot via home+back or menu to complete installation".
e) The rollerball will already have the top option highlighted "[Home+Back] Reboot system now", press in the on the rollerball. You should see "writing radio image ..." on the bottom ... followed by a reboot showing an "HTC" logo for a few moments ... followed by another reboot which returns to Amon_RA's recovery. Proceed to section-#8.
Section 8) Confirm everything updated correctly.
a) At this point you should be back in Amon_RA's recovery.
b) Make sure the rollerball is highlighting the top option "[Home+Back] Reboot system now", then Press and Hold the Camera button, then tap/press-in the rollerball.
c) This will reboot you into the bootloader, at which point the Radio and SPL versions will be presented. If all went well you should now have "HBOOT-1.33.2005 (DREA10000)" and "RADIO-3.22.26.17".
Section 9) Install Custom/Rooted ROM w/EBI1 kernel support.
a) You are now ready to flash a custom ROM w/EBI1 support. If you flash my "TheOfficial Rogers v2.0.1 EBI1", it is a mirror image of everything necessary to get your data turned back on from Rogers. I'm also aware that CyanogenMOD has an EBI1 support/patch for RogersDream users, and I "hear" it works too in terms of not shutting off your data plan.
TheOfficial Rogers v2.0.1-EBI1 can be found here ... http://forum.xda-developers.com/showthread.php?t=556933 .
Simply download the v2.0.1-EBI1 version of the ROM (at the bottom of POST#1), copy it to your sdcard, boot into recovery, perform a data wipe, flash the ROM and reboot. And you'll be all set.
CyanogenMOD for EBI1 ... reference his wiki here ... http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Rogers_Dream_EBI1_to_CyanogenMod ... not 100% sure how the full install goes, but skip to "updating cyanogenmod" section and probe his thread for ROM+gapps installation process, etc. ... or visit them on freenode #cyanogenmod, they're always very happy to help.
Reserved......
Doing it right now! I'll give you an update on how it went. Thank you soooo much!
Is this supposed to work even on Rogers Dream with 1.89.631.1 applied (911 fix)?
I receive the following screen output when trying to flash DREAIMG.nbh:
Main Version is older!
Update Fail!
Do you want to reboot device?​
bt1980 said:
Is this supposed to work even on Rogers Dream with 1.89.631.1 applied (911 fix)?
I receive the following screen output when trying to flash DREAIMG.nbh:
Main Version is older!
Update Fail!
Do you want to reboot device?​
Click to expand...
Click to collapse
Not sure ... I had thought that Haykuro was suggesting it would. Honestly I do not have a personal experience with that update so I can't say for sure. But the message you are receiving would imply that ... what SPL version do you have ?
~enom~
enomther said:
Not sure ... I had thought that Haykuro was suggesting it would. Honestly I do not have a personal experience with that update so I can't say for sure. But the message you are receiving would imply that ... what SPL version do you have ?
~enom~
Click to expand...
Click to collapse
from my HBOOT:
DREAM PVT 32B SHIP S-ON d
HBOOT-1.33.0010 (DREA21000)
CPLD-4
RADIO-3.22.26.17
June 2 2009,21:33:16
bt1980 said:
from my HBOOT:
DREAM PVT 32B SHIP S-ON d
HBOOT-1.33.0010 (DREA21000)
CPLD-4
RADIO-3.22.26.17
June 2 2009,21:33:16
Click to expand...
Click to collapse
Yea ... again not sure ... if you reference (like I did) Haykuro's thread ... here ...
http://forum.xda-developers.com/showthread.php?t=625073
It seemed to me that it was suggesting you could indeed downgrade with that image. The image is one and the same.
EDIT: OK apparently they never found a fix if you're already running the latest non-rooted rogers update. So apparently you need to be rooted already. Sorry 'bout that. I'll update the OP with this information.
~enom~
bt1980 said:
from my HBOOT:
DREAM PVT 32B SHIP S-ON d
HBOOT-1.33.0010 (DREA21000)
CPLD-4
RADIO-3.22.26.17
June 2 2009,21:33:16
Click to expand...
Click to collapse
I updated the OP with this information. Sorry ... the testing Rogers devices I had access to were already rooted. Didn't take enough care to read that entire thread.
Hopefully a solution will be found soon via GoldCard or the like.
~enom~
Upgrade
I just finished my upgrade and I will wait for me data to return. Fingers are crossed!!
Also, acore seems to crash quite often. Is this normal?
AndroidFann said:
I just finished my upgrade and I will wait for me data to return. Fingers are crossed!!
Also, acore seems to crash quite often. Is this normal?
Click to expand...
Click to collapse
Did you wipe before installing the new ROM ? That can cause the acore FC problem if you didn't.
If so ... wipe again in recovery and if you used Apps2SD ...make sure you ext partition is wiped too.
~enom~
Hey, I'm already rooted with CM 1.4's recovery and HBOOT 1.33.2005. Is Amon_Ra and the ENG version of HBOOT really needed or can the Radio just be updated?
Sorry if this has been addressed in other threads already.
Thanks,
Tom
Welll so far, it's working. Now I just have to wait for my data to be restored. Thank you!
anonymoustom said:
Hey, I'm already rooted with CM 1.4's recovery and HBOOT 1.33.2005. Is Amon_Ra and the ENG version of HBOOT really needed or can the Radio just be updated?
Sorry if this has been addressed in other threads already.
Thanks,
Tom
Click to expand...
Click to collapse
I'm really recommending ALL versions match. Really knowing which ROM your running says it all.
If you're running my TheOfficial Rogers EBI0 ... meaning the "original" ROM ... and not the new EBI1 ROM, then you must update.
But simply as the first post states, if you're running an older radio ... such as 2.22.19.26I ... you must follow all of the steps. It's a complete rebuild to get you to EBI1, to support the newer radio.
~enom~
darkspirit386 said:
Welll so far, it's working. Now I just have to wait for my data to be restored. Thank you!
Click to expand...
Click to collapse
Awesome! Not sure if you'll have to beg Rogers to cut back on your data now or not, but once it's on, you should be golden.
~enom~
I am currently running your rogers original. I will update. Quick question however, does Amon_Ra's support SwitchROM? I really love that script!
anonymoustom said:
I am currently running your rogers original. I will update. Quick question however, does Amon_Ra's support SwitchROM? I really love that script!
Click to expand...
Click to collapse
Yes it does, just goto console and type switchrom -s WhateverYouWannaCallIt to save and switchrom -r to restore.
anonymoustom said:
I am currently running your rogers original. I will update. Quick question however, does Amon_Ra's support SwitchROM? I really love that script!
Click to expand...
Click to collapse
Yea it does ... but again ... with moving to an EBI1 setup, your ROM choices will be much more limited now.
I'm only aware of my RogersEBI1 and the CyanogenMOD w/EBI1 kernel patch working. There may be others, I haven't bothered to dig around enough ... but the point is ... limited options, as virtually all of the ROM's in this section are EBI0 ROM's.
~enom~
Thanks shadow (I don't like your avatar)
I need the full exchange support that your ROMs offer. I have been very limited in my choices anyways. Good thing you make excellent ROM's!

[Guide] G1 How-to: Root, Un-Root & Everything in-between; 2708 1.33.0013d

!!READ DIRECTIONS VERY CAREFULLY!! I AM NOT RESPONSIBLE FOR BRICKING YOUR DEVICE!!
Now that i got the warning out of the way i can promise you this method works 100% as long as you follow these directions exact!!
INDEX:
~1: Rooting
~2: Google By-pass
~3: No Recovery
~4: ENG SPL/Fastboot help
~5: Un-Rooting
~For instructions on installing ADB/Fastboot Drivers see this:
[Guide] SDK r11+, Installing adb/fastboot drivers for windows Vista/7
---------------------------------------------------------------------------------------------------------------------------------------------
1~Rooting
---------------------------------------------------------------------------------------------------------------------------------------------
-This guide is for the US T-Mobile G1
-DO NOT jump in on any part of the guide without knowing what your doing!!!
Note: Be sure your sdcard is FAT32 format
Now to get started..
whether you are on 1.1, 1.2... 1.5 or 1.6 do Step 1!!
---------------------------------------------------------------------------------------------------------------------------------------------
Step 1. Get to 1.5 stock and flash recovery!
---------------------------------------------------------------------------------------------------------------------------------------------
Download these files...
DREAIMG.nbh(downgrades to 1.0)
update.zip(upgrades to 1.5)
Flashrec.apk(lets you flash custom recovery.img)
Recovery.img(RA-Dream custom recovery.img)
now place all files on root of your sd card and follow these directions do NOT mix up files or forget which one is which.. lol
(if your device doesn't see the DREAIMG.nbh file, make sure your sdcard is formatted in FAT32)
1. Power on phone via fastboot (camera+power) wait for it to ask if you want to apply update and agree, wait for it to finish.. now power off device.
2. Reboot via recovery (home+power) now if you are unrooted you should get a screen with a triangle and a ! at this point press and hold "alt+L" untill words pop up on screen, now press "alt+W" to wipe phone data, than press "alt+S" to apply update. now reboot phone and sign in to google.
3. Once signed into google and at home screen go into the market and download "OI File Manager" now go back to your home screen and go to settings>applications> now check the box that says "unknown sources", then scroll down to development and open the menu to check the box that says USB debugging.
4. Now go back to your home screen and open the app drawer to find the installed OI File Manager and open it, press allow and continue than look on your sd for the "flashrec" file you downloaded, select it and install it. When its finished press open than press the "backup recovery" button, now in the box area type sdcard/recovery-RA-dream-v1.7.0-cyan.img than the "flash recovery button should light up. Press it and let it finish, now your device is rooted! Power off and boot up into recovery! (home+power)
*(Note) If you have no Data Plan than you can use the google by-pass method. for it to work properly follow directions here...
-Flash DREAIMG.nbh from step 1
-Reboot and follow google by-pass method [Be sure to sign into google]
-Now reboot to recovery and DO NOT wipe data, only apply the update..
(This should update your firware to 1.5 without wiping your google sign-in data from the by-pass method)
---------------------------------------------------------------------------------------------------------------------------------------------
Step 2. Upgrade to 2.22.23.02/1.33.2005/Danger spl
---------------------------------------------------------------------------------------------------------------------------------------------
Now delete the old files off your sd card and place these files on it!!
Radio 2.22.23.02.zip
G1 SPL.zip
DangerSPL.zip
1. Scroll down to wipe data and do so.. than go to "flash .zip file" now the first file you want to flash is the "radio" file you downloaded, let finish than press home+back to apply update, it should reboot back to recovery after this.
2. Now go to wipe again and do so.. the next file you want to flash is the "G1 Spl" (Hard SPL) so flash the .zip file and let finish than press home+back to apply update.. Now it should boot back into recovery again.. if not than just power down and reboot into recovery.
3. Go to wipe data 1 more time.. now go to flash zip and select the "Danger SPL.zip" let finish and press home+back to apply update.. now you have the Danger Spl installed!!
4. Power back on into bootloader (camera+power) and check if device says..
Dream PVT 32b ENG S-off
HBOOT 1.33.2005 (drea10000)
CPLD-4
RADIO 2.22.23.02
APR 20, 2009, 15:30:43
If this is what you see than you can move on to Step 3...
---------------------------------------------------------------------------------------------------------------------------------------------
Step 3. Upgrading to 2.22.28.25/1.33.0013d
---------------------------------------------------------------------------------------------------------------------------------------------
*This method is for flashing zip files via recovery, if you are experienced and have 'fastboot' enabled than the safest method would be flashing the required files via fastboot.
for proper instructions refer to EzTerry's 2708+ thread here.
Now here comes the fun part Download these files..
(I added a .zip for the 2.22.27.08 radio also, it's your choice. here is some threads about the two radio's..
Here & here...
Quote by EzTerry:
WARNING:
1) flashing a 2.22 radio via recovery if you have a 3.22 or 1.33 radio via recovery *will* brick your phone
2) flashing the 1.33.0013d spl with a 1.22 radio via recovery *will* brick your phone
Click to expand...
Click to collapse
Radio 2.22.28.25 (from ezterry 2708+ guide with added safety features )
Radio 2.22.27.08
HBoot 1.33.0013d
Ohsaka Superwipe
Again delete the old files off your sd card and place these files on it!!
1. Boot up into recovery mode, go to flash zip from sd and select Ohsaka superwipe. wait till finish then go to power down!! now boot back up into recovery again.
2. Now do a manual wipe of data and cache.. (please follow along exactly and wipe data everytime i say to wipe data)
3. Now flash the radio (2.22.28.25).zip file.. let finish than flash the hboot (1.33.0013d).zip file and let it finish! then reboot the device for update to apply.
4. Power off the device, then reboot into bootloader (camera+power) and check if device says..
Dream PVT 32b SHIP S-on
HBOOT 1.33.0013d (drea10000)
CPLD-4
RADIO 2.22.28.25
OCT 21,2009,22:33:27
If that is what you see than you did it correctly and are free to flash the latest Roms for the G1
Here is original thread for EzTerry's 2708+... http://forum.xda-developers.com/showthread.php?t=831139
---------------------------------------------------------------------------------------------------------------------------------------------
2~By-pass Google sign-in(Wi-Fi)
---------------------------------------------------------------------------------------------------------------------------------------------
You must be on stock 1.0 firmware (rc29-US rc7-UK)
also please remove your sim card if you have one in the device.(you can put it back in later)
You must also have ADB installed on your Computer (Extract to C: Drive), Download & Install the USB drivers. U can Manually Install when Computer Asks for the Drivers once U Connect your G1.
Last, you must have a Wi-Fi connection ready for signing into google
1- Plug your G1, power on & Install Drivers.(DO NOT press any buttons on device after powering on)
2- Now open keyboard and type this(again do not press anything else untill prompted), ( <enter>setprop persist.service.adb.enable 1<enter> ) Even though u dont see what u r typing, but u are actually executing a Command on your G1 to Enable USB Debugging in Settings.
3- Once u Execute that Command USB Drivers will be Installed again, but this time will be recognised as ADB Interface.
4- on computer Click Start>Run>cmd> to Command Prompt
5- Type c:\(sdk folder)\tools\adb devices (If your Device is Connected u will see it)
6- Restart your G1 but now With Sim, to see the Activation Screen then Plug USB Cable & Type c:\adb devices (to make sure u are connected)
7- Type c:\adb shell (U will see a $ sign) Just Copy & Paste this into Command Prompt (am start -a android.intent.action.MAIN -n com.android.settings/.Settings) The Settings Screen will Appear, now Switch on Wi-Fi & Connect to the Internet.
8- Now u can either Login with your Existing or Create New Account with Google.
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------------
3~No Recovery?
---------------------------------------------------------------------------------------------------------------------------------------------
quote by EzTerry:
Dream
1) Download: Orange.nbh
2) enter fastboot and run 'fastboot flash nbh orange-1.58.73.2.nbh'
3) wait for the entire nbh to flash
4) boot into the bootloader again (it will be an engineering SPL 1.42.2000)
5) You can now re-flash the radio/hboot/recovery via fastboot that you wish to have installed.
Click to expand...
Click to collapse
found here: 2708+ enabled kernel [14MB ram with radio 2.22.27.08/2.22.28.25 & hboot 1.33.0013d]
--------------------------------------------------------------------------
-------------------------------------------------------------------
4~Engineering SPL
--------------------------------------------------------------------------
-------------------------------------------------------------------
Engineering SPL.zip
quote from EzTerry:
If you just temporarily need an engineering SPL (and recovery is working):
(and have SPL 1.33.0013 + radio 2.22.27.08):
1) Nanroid backup
2) Flash (via recovery) Engineering SPL.zip
3) do what you need to in the engineering SPL
4) reflash 1.33.0013d as above (install, reboot bootloader, fastboot erase)
5) restore nandroid
** Please remember if you have CustomMTD to remove it before flashing a SPL or Radio from recovery
Click to expand...
Click to collapse
found here: 2708+ enabled kernel [14MB ram with radio 2.22.27.08/2.22.28.25 & hboot 1.33.0013d]
Fastboot --help
quote from CyanogenMod wiki:
usage: fastboot [ <option> ] <command>
commands:
update <filename> ------------------------ reflash device from update.zip
flashall ----------------------------------- flash boot + recovery + system
flash <partition> [ <filename> ] ------------ write a file to a flash partion
erase <partition> ------------------------- erase a flash partition
getvar <variable> ------------------------- display a bootloader variable
boot <kernel> [ <ramdisk> ] --------------- download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] ------ create bootimage and flash it
devices ----------------------------------- list all connected devices
continue ---------------------------------- continue with autoboot
reboot ------------------------------------ reboot device normally
reboot-bootloader ------------------------- reboot device into bootloader
options:
-w ---------------------------------------- erase userdata and cache
-s <serial number> ------------------------- specify device serial number
-p <product> ------------------------------ specify product name
-c <cmdline> ------------------------------ override kernel commandline
-i <vendor id> ----------------------------- specify a custom USB vendor id
-b <base_addr> --------------------------- specify a custom kernel base address
-n <page size> ---------------------------- specify the nand page size. default:2048
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------------
5~Un-Rooting
---------------------------------------------------------------------------------------------------------------------------------------------
Download these files...
DREAIMG.nbh
update.zip
Now would be a good time to un partition your sd card since there will no longer be a custom recovery..
1. first you take the "DREAIMG.nbh" file and the first "update.zip" file and place on root of sdcard!
2. start phone in recovery mode (home+power) do a quick wipe of everything! than flash the update.zip file.. wait for finish than reboot or power off.. whatever prompts tell you. than make sure device is powered off after finished installing!
3. power on via fastboot (camera+power) and wait for selection to pop up asking to install the update! press confirmation button to apply and let it work its magic!!
Now your phone will be on stock android 1.0 firmware! you have 2 options..
a. wait for automated updates.. could take up to 48 hrs..
b. flash updates to 1.5 and or 1.6 via stock recovery!
if you chose option b than you are smart! lol who wants to wait for updates for a G1 nowadays? lol
ok so now to apply updates via stock recovery you do what you would normally do.
Download these files...
Stock 1.5 (OTA)
Stock 1.6 (OTA)
(the stock 1.5 and 1.6 files are also "update.zip" so be sure not to mix them up and confuse the proccess!!)
1. Place files on root of sd.. DO NOT RENAME FILES, the stock recovery will only flash an "update.zip" so please dont make any changes to file.names...
2. boot into recovery mode (home+power) and wait for screen with yellow triangle and this thing ! now press alt+L together untill you see more words pop up on screen..
3. Now press alt+w to wipe the data on phone... (just do it dont ask why) lol after wipe is complete press alt+s to apply update! once it's finished reboot your device and you are ready to go!!
unfortunately the 1.6 i provided is not the DMD40, you still have to wait for that automatic update lol i have the 1.6 before the update... it is the official tmobile firmware its just not the latest.. never really bothered to search for latest one..
---------------------------------------------------------------------------------------------------------------------------------------------
Thanks to EzTerry, CyanogenMod, Firerat & all developers of the HTC Dream!! and ofcoarse the wonderfull people of XDA!!
ANY QUESTIONS? FEEL FREE TO ASK
nice guide you got there. wish this was around last week before i ended up bricking another g1 i had. lol
but there is one thing wrong with your guide, but it isnt a major thing. you dont actually need an active data plan to bypass the log in screen if you follow this method for that. that's what i used since i myself dont have a data plan and it worked for me
lilchicano said:
nice guide you got there. wish this was around last week before i ended up bricking another g1 i had. lol
but there is one thing wrong with your guide, but it isnt a major thing. you dont actually need an active data plan to bypass the log in screen if you follow this method for that. that's what i used since i myself dont have a data plan and it worked for me
Click to expand...
Click to collapse
hey thanks for the info!! i will add it in the guide! was unsure if there was a method to get by the sign in lol you did this yourself?
ldrifta said:
If you are already rooted send me a pm with info on your device so i can tell you what step to pick up on..
Click to expand...
Click to collapse
This Phone is already rooted running Dream 32
Hboot 0.95.0000
CPLD-4
Radio 2.22.23.02
At what point do I need to start?
Please PM me the steps or reply here.
1. When you say to delete old files in step two do you mean the 4 files I put on the phone in step 1.
2. When you say delete old files in step 3 just the files that were added in Step 2?
3. Then which rom do you recommend?
golfslicer said:
This Phone is already rooted running Dream 32
Hboot 0.95.0000
CPLD-4
Radio 2.22.23.02
At what point do I need to start?
Please PM me the steps or reply here.
1. When you say to delete old files in step two do you mean the 4 files I put on the phone in step 1.
2. When you say delete old files in step 3 just the files that were added in Step 2?
3. Then which rom do you recommend?
Click to expand...
Click to collapse
yes when i say to delete files im talkin about the ones from the previous step, and i recomend the 3 roms listed at bottom of guide i suggest you start off at step 2 boot into recovery go to wipe data and do so.. than flash the "spl" file first, than wipe data again and flash the "danger spl"!! no need to flash radio file because you are currently on that radio.. lol than just continue on to step 3!
ldrifta said:
yes when i say to delete files im talkin about the ones from the previous step, and i recomend the 3 roms listed at bottom of guide i suggest you start off at step 2 boot into recovery go to wipe data and do so.. than flash the "spl" file first, than wipe data again and flash the "danger spl"!! no need to flash radio file because you are currently on that radio.. lol than just continue on to step 3!
Click to expand...
Click to collapse
Started at Step 2 Wiped, but there is no selection on the menu to select a zip file, just update zip. Is the Update zip from step 1 supposed to be on the phone even though I started at step 2. I tried download an update.zip with clockwork but get signature verification failed.
Great guide!
Thanks for using my name in step 3
Step 3 is perfect
BTW: Here is my version.
I think the root proces goes faster without downgrading, only search for "universal androot", and install this .apk! Then click on root and your device is rootes !
And then install a recovery via "Rom Manager" from the market.
But this is my opinion I did it like that!
I didnt use any guide, I made everything by myself and it worked! Rooting, 2.22.23.02 radio and 1.33.2005 hboot(spl), and then the 2.22.27.08 radio and 1.33.0013d hboot, flash a Rom!
But I thought, that the most people have the 2.22.23.02 radio, so I only write a guide about 2.22.27.08 radio + 1.33.0013d hboot!
golfslicer said:
Started at Step 2 Wiped, but there is no selection on the menu to select a zip file, just update zip. Is the Update zip from step 1 supposed to be on the phone even though I started at step 2. I tried download an update.zip with clockwork but get signature verification failed.
Click to expand...
Click to collapse
That means you dont have a custom recovery.. which also might mean your not rooted.. you should follow the un-root method first and than try this guide from step 1 and you will be all set i promise!
habitat22 said:
Great guide!
Thanks for using my name in step 3
Step 3 is perfect
BTW: Here is my version.
I think the root proces goes faster without downgrading, only search for "universal androot", and install this .apk! Then click on root and your device is rootes !
And then install a recovery via "Rom Manager" from the market.
But this is my opinion I did it like that!
I didnt use any guide, I made everything by myself and it worked! Rooting, 2.22.23.02 radio and 1.33.2005 hboot(spl), and then the 2.22.27.08 radio and 1.33.0013d hboot, flash a Rom!
But I thought, that the most people have the 2.22.23.02 radio, so I only write a guide about 2.22.27.08 radio + 1.33.0013d hboot!
Click to expand...
Click to collapse
Lol thanks! I originally was at 23.02 than i found your guide (thank god) lol so i figured i would put updated guide of it all! Rooting, un rooting i will add your method as well thanks for the info
Here is the .apk for my rooting proces:
1. Universal AndRoot 1.6.2 beta
Other version (easy+fast) for step 1
---> No downgrade needed!
1.Root
Download the Universal-AndRoot.apk, put it on your sdcard and install it with a filemanager from market.
Open the app and click on root for Android 1.6!
After, your device is rooted!
2.Recovery
Install "Rom Manager" from market and allow superuser!
Then click on "Flash ClockworkMod Recovery" and select "HTC Dream/G1"!
After this proces, you are allowed to flash another recovery with the "Rom Manager"
Install RA Recovery 1.7.0!
habitat22 said:
Here is the .apk for my rooting proces:
1. Universal AndRoot 1.6.2 beta
Other version (easy+fast) for step 1
---> No downgrade needed!
1.Root
Download the Universal-AndRoot.apk, put it on your sdcard and install it with a filemanager from market.
Open the app and click on root for Android 1.6!
After, your device is rooted!
2.Recovery
Install "Rom Manager" from market and allow superuser!
Then click on "Flash ClockworkMod Recovery" and select "HTC Dream/G1"!
After this proces, you are allowed to flash another recovery with the "Rom Manager"
Install RA Recovery 1.7.0!
Click to expand...
Click to collapse
just added it in!! lol thanks man
Thanks for adding it with my name !
I added a link to your guiede also in my guide!
Good job!
habitat22 said:
Thanks for adding it with my name !
I added a link to your guiede also in my guide!
Good job!
Click to expand...
Click to collapse
No problem! is it cool if people contact you incase they have any questions on your part?
Yes dude, they can PM me or post their question in my thread or in yours!
And I will answer them!
!! I AM ALSO NOT RESPONSIBLE FOR BRICKING YOUR DEVICE!!
Follow the steps exactly!! Then everything will work perfect!!
Perfect Post
I fallowed the steps exactly, and now my phone will not start up, it stays stuck at the G1 logo. I can get to the recovery but nothing works. In the fast boot menu everything is updated but i just am stuck and dont know what else to do.
dfe002 said:
I fallowed the steps exactly, and now my phone will not start up, it stays stuck at the G1 logo. I can get to the recovery but nothing works. In the fast boot menu everything is updated but i just am stuck and dont know what else to do.
Click to expand...
Click to collapse
what does it say when you boot in fastboot? did you flash a rom? some of the roms i listed in guide take like 10 min on the G1 screen b4 they boot
Its says exactly what its supposed to on step 3 or 4 with the updated radio and all. And yes i tried out one of your roms and let it sit for a good 20 min or so and all it did was bring up the "T-Mobile G1" logo for about 3 minutes and then it would cut off and do it again.
I redid step one and my phone works now but its still running 1.5
dfe002 said:
Its says exactly what its supposed to on step 3 or 4 with the updated radio and all. And yes i tried out one of your roms and let it sit for a good 20 min or so and all it did was bring up the "T-Mobile G1" logo for about 3 minutes and then it would cut off and do it again.
I redid step one and my phone works now but its still running 1.5
Click to expand...
Click to collapse
o ok well how far did you go on step 1.? did you flash recovery? i just want to make sure your recovery is properly working before you try to do anything else.. remember on step 2 you install "radio" first, than wipe!! and flash "Spl" and wipe again and flash "Danger Spl"!! You need "danger Spl" in order to properly flash radio 2.22.28.25! And on step 3. just make sure you follow every single little detail. How did you do it last time?

[Q] Noob Help with ClockWork

Hey Guys,
I am new to the forum, and pretty new to rooting. I am trying to root my T-Mobile HTC Sensation based off the instructions from the xda HTC Sensation forums.
http://forum.xda-developers.com/showthread.php?t=1192300
I am able to get S-off, which seems to work through reboots, but when I try to move ClockWork recovery to the phones root file, go into HBoot, I get a quick errors on the PG58DIAG file. I've scoured the forums for solutions, renamed files, etc. and I keep hitting the same wall.
Listed below are screen shots, the names of the files, and the PG58DIAG file I keep trying to move over.
I have no clue what i am doing wrong, and instead of wasting more time, I figured I would ask you guys. I would like to get the right recovery in there, so I can move to perm-rooting. I would eventually like to remove bloatware, overclock the cpu, and install an ICS Rom, as I am sick of waiting for the ICS update.
Thanks,
Kevin
Ok, so no one knows? Can someone at least point me in the direction of finding a solution. I can't yet post in the Sensation Forums, so PLEASE HELP!
x| Viper |x wrote:
STEP 2. To INSTALL Recovery - v5.0.0.8
1. Download recovery v5.0.0.8 for the Sensation HERE: or Multiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
6. Delete PG58IMG from your memory card and you can now root using step 3 below or install a custom ROM using CWM (Customs Roms are already rooted)
7. OPTIONAL: Boot into recovery or Completely switch off (Fastboot disabled or remove and reinsert battery)
Follow STEP 4 SUPER CID sub steps 1-6 to get adb running
8. Enter the command "adb shell cat /sys/devices/platform/htc_battery/power_supply/battery/status" Phone will confirm it is "CHARGING"
Charging issues fixed with new clockwork recovery. writing is now BLUE not purple or orange
Step 3. To permanently root your Sensation - (This means you will NOT LOSE ROOT on rebooting)
1. Download the file su-2.3.6.3-ef-signed.zip from here: DOWNLOAD
2. Copy su-2.3.6.3-ef-signed.zip to your SD card root folder (main folder of your memory card)
3. Start clockworkmod recovery (instructions below. See To Start Clockwork recovery)
4. BACKUP YOUR ROM USING CWM BEFORE ATTEMPTING ROOT!
5. Navigate to "Backup & Restore" using the Volume Down button and press select (power button to select) then select "Backup"
6. Select "install zip from sdcard" after backing up
7. Then select "Choose zip from sdcard"
8. Then select "su-2.3.6.3-efgh-signed.zip"
9. Then select "Yes - install su-2.3.6.3-efgh-signed.zip" to confirm
10. Then go back
11. Then reboot.
12. You're rooted!
quotation end.
Did you follow exactly these steps????
The .ZIP
The .zip file you submited is twice times compressed, Could be?
You shoud not have any problems with the tutorial, try to search another verision of the file.

[GUIDE] Rooting the official Desire S 2.3.5 ROM

Here's a detailed guide for all beginners who want to root Desire S with official 2.3.5 ROM using a PC with Windows Installed. I have personally tested this method on a few devices with a clean official ROM.
Notes:
This guide use the path "C:\Android" as example
Files preparation:
A) downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Put this file in the root directory of your memory card.
(You can always visit androidsu.com/superuser/ for a newer version. The above link is the version I used.)
B) download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-saga.img
Put this file in the directory containing "fastboot" and "AdbWinApi.dll" on your computer.
(You can always visit clockworkmod.com/rommanager for a newer version. The above link is the version I used.
Part I - Unlocking your Desire S and Installing ClockworkMod Recovery
1. Visit htcdev.com and unlock your Desire S first. Keep ALL files you downloaded from htcdev.com.
(A detailed guide is on that official website. At the moment, please choose "All Others Supported Models")
2. Ensure there is no file name as "PG88IMG.zip" in the root directory of your memory card. (The file may exist as you may have tried to root your device.)
3. Power off your phone.
4. Press and hold "Power" and "Volume-" buttons together until you a white screen with a few lines.
5. Use "Volume+" or "Volume-" buttons to choose "FASTBOOT", and press the "Power" button.
6. Connect your phone to your computer with a USB cable.
7. Run "Command Prompt" and run the following command:
cd C:\Android​fastboot flash recovery recovery-clockwork-5.0.2.0-saga.img​
Part II - Rooting Desire S with ClockworkMod Recovery
8. Power off your phone.
9. Press and hold "Power" and "Volume-" buttons together until you reach a white screen with a few lines.
10. Enter "RECOVERY"
11. Choose "install zip from sdcard"
12. Select "choose zip from sdcard"
13. Choose "Superuser-3.0.7-efghi-signed.zip"
14. Choose "Yes - Install Superuser-3.0.7-efghi-signed.zip"
15. Turn on your phone. Install and test some root-required apps such as Titanium Backup/Root Explorer/ClockSync,etc
16. Then you are done. Enjoy
Good guide. You should add information about the difference between htcdev unlock and s-off. Just to let people know what they're doing and what could be done different.
Sent by my fingers to your head.
Agreed, for some, htcdev unlock means more unnecessary steps, over and over again.
Hello,
I hope unlock the Desire S bootloader.
At the HTCDEV site, HTC DESIRE S is not listed.
Can I select the normal HTC DESIRE or the HTC Desire HD ?
Need help
Thanks a lot for eyahl's and ammenRA's opinion.
My intention is keep this rooting guide as simple as possible.
And I think there is already a glossary out there, so I did not (and won't) post it here.
I hope you understand.
TF85 said:
Hello,
I hope unlock the Desire S bootloader.
At the HTCDEV site, HTC DESIRE S is not listed.
Can I select the normal HTC DESIRE or the HTC Desire HD ?
Need help
Click to expand...
Click to collapse
Please read the line under Step 1 in Part I
hallo i have problem with installing via clockworth superuser i have done everything just the clockworth is missing in my sdcard i cant find it there can you help me what to do ??
maho92 said:
hallo i have problem with installing via clockworth superuser i have done everything just the clockworth is missing in my sdcard i cant find it there can you help me what to do ??
Click to expand...
Click to collapse
You don't have ClockworkMod Recovery in your SD card.
You should have flash(install) ClockworkMod Recovery directly into your phone through Command Prompt, which comes with a PC with Windows.
Make sure you are following the steps, especially Part I carefully.
yes i have clockwork recovery because when i start recovy it shows me normal clockwork program in which i can choose from sd card but that program which i should choose from sd card is missing i dont understand it ..
@poster
u forgot to mention that if they want to flash a ROM they need to also flash the boot.img of that ROM via fastboot.
Cheers
lynxnoon said:
@poster
u forgot to mention that if they want to flash a ROM they need to also flash the boot.img of that ROM via fastboot.
Cheers
Click to expand...
Click to collapse
Thank you very much for your reminder
In fact, I think my title of the post is clear enough for the purpose already
maho92 said:
yes i have clockwork recovery because when i start recovy it shows me normal clockwork program in which i can choose from sd card but that program which i should choose from sd card is missing i dont understand it ..
Click to expand...
Click to collapse
You have to download the "Superuser-3.0.7-efghi-signed.zip" from
"downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip"
Then put the zip into your sdcard
How to remove Super user and get back to factory reset
I don't find the Factory reset option under privacy and the BootLoader Factory reset is not allowing to do as well. How do I remove Super User and get back to Factory Reset
Thanks for the useful guide...
I've managed to unlock the phone as instructed.
However, when following Part II of the guide, when I enter Recovery Mode I dont have the option to 'Install Zip from SD Card'.
Instead I get an image of a Phone with a red explanation mark. I have made sure that Superuser-3.0.7-efghi-signed.zip is on the root of the sd card.
Any Ideas?
Thanks a lot
---------- Post added at 02:38 PM ---------- Previous post was at 02:04 PM ----------
OK, I managed to figure this out, I had to press power and volume-up to get to the menu in which i'm then taken to the Andriod System Recovery <3e> menu.
There is no option called 'Install Zip from SD Card' however...
You didn't flash the custom recovery, or didn't do it correctly.
You're in stock recovery.
Please look at the guide, look at what you've done and see where you went wrong.
Thanks for that Jack_R1... How sure how I missed that.
Everything seems ok now. Thanks a lot!
HELP Desire S third-party ROM
I want to ask if I want to install a customed ROM, what is the boot.img? Do you happen to know the detailed steps.
Xanthux.Smith said:
Thank you very much for your reminder
In fact, I think my title of the post is clear enough for the purpose already
Click to expand...
Click to collapse
Everything has worked but no root ??
Hi all,
Have followed the guide written above to the letter, and everything went smoothly without error..
I have the SU application installed. etc.
i booted in to make sure everything is ** unlocked **
and its stating:
** UNLOCKED **
and S-ON still
am i missing one last step or has something gone incorrectly, im not sure i fully understand.
when i run the SU application from within the phone there is an update available. the SU app downloads the file and attempts to install it,. then fails "obtaining root".
Anyone got any ideas ? how i can get to the S-OFF or any links i can read ?
Thanks in Advance for any help suggestions, ive tried revolutionary and it says it doesnt support 2.00.0002
SAGA PVT SHIP S-ON RL
HBOOT-2.00.0002
RADIO-3822.10.08.04_M
eMMC-boot
Aug 22 2011,15:22:13
V
Nice thread
Xanthux.Smith said:
Here's a detailed guide for all beginners who want to root Desire S with official 2.3.5 ROM using a PC with Windows Installed. I have personally tested this method on a few devices with a clean official ROM.
Notes:
This guide use the path "C:\Android" as example
Files preparation:
A) downloads.androidsu.com/superuser/Superuser-3.0.7-efghi-signed.zip
Put this file in the root directory of your memory card.
(You can always visit androidsu.com/superuser/ for a newer version. The above link is the version I used.)
B) download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-saga.img
Put this file in the directory containing "fastboot" and "AdbWinApi.dll" on your computer.
(You can always visit clockworkmod.com/rommanager for a newer version. The above link is the version I used.
Part I - Unlocking your Desire S and Installing ClockworkMod Recovery
1. Visit htcdev.com and unlock your Desire S first. Keep ALL files you downloaded from htcdev.com.
(A detailed guide is on that official website. At the moment, please choose "All Others Supported Models")
2. Ensure there is no file name as "PG88IMG.zip" in the root directory of your memory card. (The file may exist as you may have tried to root your device.)
3. Power off your phone.
4. Press and hold "Power" and "Volume-" buttons together until you a white screen with a few lines.
5. Use "Volume+" or "Volume-" buttons to choose "FASTBOOT", and press the "Power" button.
6. Connect your phone to your computer with a USB cable.
7. Run "Command Prompt" and run the following command:
cd C:\Android​fastboot flash recovery recovery-clockwork-5.0.2.0-saga.img​
Part II - Rooting Desire S with ClockworkMod Recovery
8. Power off your phone.
9. Press and hold "Power" and "Volume-" buttons together until you reach a white screen with a few lines.
10. Enter "RECOVERY"
11. Choose "install zip from sdcard"
12. Select "choose zip from sdcard"
13. Choose "Superuser-3.0.7-efghi-signed.zip"
14. Choose "Yes - Install Superuser-3.0.7-efghi-signed.zip"
15. Turn on your phone. Install and test some root-required apps such as Titanium Backup/Root Explorer/ClockSync,etc
16. Then you are done. Enjoy
Click to expand...
Click to collapse
I used your method on the latest HTC RUU ICS with HBoot 2.02.00002 with some differeces I used SuperSU and 4EXT Recovery. It worked :good:

Categories

Resources