Confused, when my phone is hooked up to my computer and android is running, AndroidSDK\tools command runs fine and is connected.
But when I boot into clockwork and I try to start working with ADB shell (I've been trying to partition my SD card), it tells me Error: Device Offline.
HELP>
Related
When i try to push apps and etc, it goes directly to the phone but when i plug in my phone and do it through the usb it gives me whats on the sdcard and not the phone. but when i use i execute it like such "adb push C:\APP.APK /sdcard" and it still does that.
Please Help!
Yesterday i wanted to install the Android Revolution HD Rom Then I Copied THE Super Wipe And Rom It self to my Internal then i wiped My TF with Super WIPE and tried to install the rom but it said ERROR!!!
THe I Realized that i copied the rom unCorrectly and i found out that i'm screwed !
SO I Have A Super Wipe.Zip & Rom.Zip & a recovery that named "v5.5.0.4 roach-tf101-r2"
Now my recovery is v5.5.0.4 roach-tf101-r2 is that support MICRO SD Correctly?!?!
MY Micro SD is 16 GB Class 10.
and i tried Nvflash but i couldn't start it! i am on WIN 7 x64 and i cant find "APX" in device MAnger MOD!??
Is There A Way to put a ROM to my Internal in this Situation ?!?!?
i described EveryThing For You GUYS!
So Please HELP ME DEVs and Others I NEED YOUR Help!
How Can I Install The Drivers In the link Below!?!?
http://forum.xda-developers.com/showthread.php?t=1514942
Roach's newest recovery only reads from the internal sdcard not the removable one.
Since you can get to recovery, all you need to do is connect the tf101 to a computer via USB, mount the USB storage in recovery which makes the tf101 appear like a flash drive to the computer. Then copy the ROM from your computer to the tf101. Last, unmount USB disconnect the tf101 from the computer and flash the ROM in recovery as normal.
a.mcdear said:
Roach's newest recovery only reads from the internal sdcard not the removable one.
Since you can get to recovery, all you need to do is connect the tf101 to a computer via USB, mount the USB storage in recovery which makes the tf101 appear like a flash drive to the computer. Then copy the ROM from your computer to the tf101. Last, unmount USB disconnect the tf101 from the computer and flash the ROM in recovery as normal.
Click to expand...
Click to collapse
Thanks BUT I Can't Mount IT Via USB!
I Fix The APX Mode and my device is showin in apx mod RIGHT now and i Run The Rouges (VIA NV Flash) And Nothing Happens There Too!
I Updated the APX drives from Universal Naked Drivers and it appeared APX nut when i Update it From the driver inside nvflash folder it appeared NVIDIA Boot-recovery ...
is that A problem?!?!
HELP!
Finally and at last a ANgel Helped Me I Will Hug him if he was here!!!!!! WOOOO
With This HELP:
download from development section android usb driver
http://forum.xda-developers.com/show....php?t=1514942
download recoveryblob from
http://forum.xda-developers.com/show....php?t=1622628
download viper mod from
http://forum.xda-developers.com/show....php?t=1427125
Official Asus update from ASUS site
step 1
Unzip usb driver
now plug the tablet at your pc with usb cable and boot you TF in recovery mode (press togheter and hold volume down and power... when you see same line in the upper left corner press volume up)
your pc will recognize a new hardware...
install new usb driver...
step 2
unzip vipermod zip and put recoveryblob file in vipermod folder... where you see a file named adb.exe
open a console in windows
start and in search line type cmd
in console go to vipermod folder
cd c:/vipermod/path
now type
adb push recoveryblob data/media
wait 4-5 minutes
type
adb shell
you will see this symbol #
now type
mkdir data/local
mkdir data/local/tmp
ln -s /dev/block/mmcblk0p4 /data/local/tmp
dd if=/sdcard/recoveryblob of=/dev/block/mmcblk0p4
The command prompt will be empty as when nothing happen, do not panic wait until the end of the process. DO NOT INTERRUPT (it will take apx.3-10 min)
When you see the following message:
8860+1 records in
8860+1 records out
4536396 bytes transferred in 1.718 secs (2640509 bytes/sec)
(the numbers in resulted message may be different but it has to have the same structure) You can safety reboot the device (hold power botton)
power on your device and you will see ASUS EeePAD flashing progress bar. Be patient and wait till the end.
step 3
unzip ASUS update file e copy the folder in a external sd
step 4
put sd in your device
step 5
put device in recovery mod (it will be a new one.. rouge...)
install zip from sd card
install from external storage
go in asus folder e select the zip file
wait the end and reboot device
at this point I incurred in encryption error but just after the first reboot the problem was solved...
IN THIS PAGE::::::http://forum.xda-developers.com/showthread.php?t=1626846&highlight=fast+boot
Wow He IS THE DEV!!!!
So basically i looked around on the forum cause i was getting crap battery and it said to wipe your SD card cause you might have a dodgy file on the phone, i did that and now the phone wont boot at all i dont have any roms to flash on it and the computer wont even seem to recognise it when i mount usb storage in CVM anyone have a clue whats going on?? and what i can do to get a rom working on it? or get it to boot
Boot into CWM recovery and connect the phone to your computer. Make sure you have ADB installed (see the links in my signature). Type "adb devices" to see if adb recognized your phone. If yes, you can transfer a rom file to the phone storage by typing:
adb push rom.zip /data/media
*Replace rom.zip with the location of the actual rom file.
Now flash the rom.
Hello,
So I made the mistake of wiping my sdcard partition, so I don't have the .zip with the ROM on the phone's memory.
The ROM I currently had was deleted aswell when I formatted /system/. Recovery works, but because I don't have an external SD card, I can not put anything on the phone memory.
So now, I can not push the zip file with adb because my Moto G is not recognised, even though I installed all the drivers (in AP Flashboot Mode) it says that the USB is connected, but "adb devices" shows nothing.
So in a few words, phone memory is empty, it's not recognised by the PC so I can not push the .zip with adb sideload.
have you tried to connect an USB stick (in cwm or TWRP)?
Probably you can mount it and install a zip.
a.lex said:
have you tried to connect an USB stick (in cwm or TWRP)?
Probably you can mount it and install a zip.
Click to expand...
Click to collapse
I found a version of the Universal ADB Drivers, installed them and the adb sideload worked.
Let this be a lesson for others with phones that don't have external SD cards - NEVER delete the ROM from your phone's internal memory
FIXED
Are you using Win8 or Win7? I have read posts from people that had problems using fastboot commands in Win8.
Hello,
I have Samsung Galaxy Core Plus (SM-G350) with broken screen (totally black) and password set up.
I want to recover my internal card data, but any of my ideas wont work.
I have already installed CWM and tried to blindly mount /sdcard by USB, but I dont see any new drive on PC.
I wanted to root it, but any of methods I found wont work (maybe cause Im running in CWM? Yes, USB debugging is disabled).
I tried also 'adb pull', but I need to mount /sdcard (am I right?) where I get 'permission denied' error - in adb shell I cant perform any command except 'cd'.
Im thinking about flashing /data by Odin, but how to create the 'script' for it?
Anybody has any idea how can I do it?
Same Boat...
I've got a broken screen on Centura Galaxy. I managed to blindly ODIN CWM on it, and now get ADB in recovery, but debugging is off so I'm stuck with there. I've tried recovery screenshot tools to try to load rooted ROM, but had no luck. I know JUST enough to be dangerous, and not much more. Just need to get DCIM folder.
@xNombre
If this is still valid, you could try flashing TWRP onto the phone, where it should mount the SD Card automatically and it should connect to the PC automatically too. Search for TWRP (either 2.8 or 3) here on XDA