Database Info

WiFi internet issue on WM6

I`ve got a T-Mobile MDA with WM6 and I cannot access the internet through WiFi. The access point that I connect to is working cause I am able to access the net fine on my laptop. I made sure that my network cards are set to connecte to the internet. I even did a softreset after I made the changes.
My internet explorer just sits there on locating. I am not sure if its just my WiFi card configured incorrectly within WM6 or if its a reg setting that isn't set right.
If anyone had this issue before and got it fixed let me know or give me some direction to start.. thanks in advance for your help.

This is a fairly common problem. For me disabling the Wireless G option in the registry did the trick:
Registry: HKLM\COMM\TNETWLN1\PARMS
Key: dot11SupportedRateMaskG
Value: 1

so I diabled it, soft restet, verified that the reg change sticked, which it did. I tried to access the net again with no go.

me too
I have the exact same problem.

Not much discussion about this
I tried the G fix. Didn't work. Funny thing. It started when I installed MB. Downgrading DIDN'T fix it.

Try setting the the Network Card to connect to "The Internet" instead of "Work"

they are set to that..

That actually worked for me. (The Internet instead of work fix) I also made sure that all the boxes for "Server assigned IP address were checked. I could have sworn I tried that already. I wonder if it will stay "fixed". I'm due for a soft reset...seems to be working. I've been thinking all along it was some stupid setting.

EclipsedMotions said:
they are set to that..
Click to expand...
Click to collapse
check the change your dns to 4.2.2.1 and 4.2.2.2 this may fix your problem
R

Changing to Internet and setting the DNS doesn't seem to help. Funny thing is, GMail via Midlet Manager seems to work (maybe its doing GPRS?). But IE just spins at Locating...

wifi internet issue on wm6
although i have the older version of t-mobiles' mda (wm5), i had similar issues connecting to the net even it sees a lot of wireless aps. either i cannot hold a steady connection or cannot connect at all. the solution i had was changing the channel on my wireless ap and updating my mda's parameters for my local wireless security. now i can go to the web using my mda even with poor signal quality. It is possible that you have several wireless ap's at your location sharing the same channel. hopefully changing the channel solves your problem.

simple possible solution, but check the proxy settings? I know with cingular, many people had trouble browsing the internet due to the MediaNet proxy settings. they removed the proxy settings and everything was fine then.

There is a known issue with your rom your running...there has been a new release. check the MB thread and you will see a recent listing about a 6 and 4 mb page pool, the wifi has been fixed.
mfrazzz said:
Changing to Internet and setting the DNS doesn't seem to help. Funny thing is, GMail via Midlet Manager seems to work (maybe its doing GPRS?). But IE just spins at Locating...
Click to expand...
Click to collapse

I have the original MB edition and I do not have any wireless problems. I know he had to fix the re-released versions as the wifi did not work with them initially, but I was unaware of a wifi problem with the initial release.

WIFI problem don't even see networks
Hey everybody, still loving this phone and its diversity, but have flashed this little piece of hardware with the mb 4mb/6mb wm6 rom only to find that WIFI can't even be turned on!. And yes I've downed the fixed versions from a certain forum. When I turn on WIFI, It just gives the symbol in the top straight away. It just can't find the networks. I even manually added a network, it then tries to find it, but simply can't. WEIRD hey.
Is there a solution for this problem, cause I really, like the look and feel of the wm6 roms over the wm5 roms.
bye all and thanks in advance for the kind replies.

Did you try using WiFiFoFum at all to see if it can find networks? I have not had any issues with WiFi with the Most Beautiful edition whatsoever. Only thing I notice is that when the machine first turns on or right after a soft reset that I need to click the comm manager icon for wifi twice before wifi will turn on. Otherwise it finds and connects to networks perfect.

Problem with MIE
i have no problem to connect to my homenetwork with WIFI, but i cannot access the internet with the internet explorer. but it works perfect with the opera browser!

hmmm..
It's weird...
I never access the internet with the internet explorer even my wifi was connected successfully while I brushed wm6 rom.
A miracle has happened Today.
I install a WIFI Device for WM5, that one is simple Chinese language.
I tried to turn on the wifi but not work.
Then I uninstall it -> restar....
Then I tried one more time to turn on wifi, ok, it's work to connect but still can't open the web page.
I check the wireless lan, switch the power save mode to best performance.
Then....I can open web page????
Wow~~ I don't know it work cause the wifi device change something or just swtich to best performance.
Maybe you guys can try.
(Sorry to reading my poor English)

thomas.iseli said:
i have no problem to connect to my homenetwork with WIFI, but i cannot access the internet with the internet explorer. but it works perfect with the opera browser!
Click to expand...
Click to collapse
Same exact issue. Pocket IE doesn't work, Opera does. Did you figure it out or get it corrected yet?

oops, double-posted

My WiFi won't turn on anymore... thoughts?

Hi guys,
In December, I started having problems with my WiFi. When I go into Comm Manager and press the WiFi symbol, I get the WinMo6 "spinner" to let me know it is thinking and then nothing.
Since then I've tried 3 or 4 different ROMs and I am still having the same problem. Is it just time for a new phone? Does anyone have any helpful hints or things to try?
Thanks in advance.

I got this exact same problem too....

Does anyone have any idea how to fix this? I would really like WiFi back.

I have a similar problem but it will turn on, find the AP but not connect. I have a g-only router ang a b-only router (both unsecured) it will not connect to either, it'll try for a few seconds then stop. I have activate the connect to G router hack in the registry.
from will

As a note, I just turned on the Today Item "Wireless" and WiFi doesn't show up at all. Does that give anyone any clues?

my phone sometimes does this not-connecting-to-available-router-trick, then my usual procedure is to reboot the router.
Sometimes it shows the Icon as connected, but in reality won't even turn on the WiFi, even after a reboot. Then it's a bit more complex... I switch off the AP, then the wireless subsystem, reboot the phone, while it's booting reboot the AP, and THEN activate wireless. This usually shocks it back into sense and it connects just fine. This usually happens after I accidentally use the popup window to control the WiFi, or sometimes randomly. Small problem, but when it happens, pretty annoying...

jrronimo said:
As a note, I just turned on the Today Item "Wireless" and WiFi doesn't show up at all. Does that give anyone any clues?
Click to expand...
Click to collapse
Yep, sounds just like what happens to me sometimes...

I happened to have same problem with my jasjar for about a year,,,
i started to believe its a hardware problem ...
the thing is i have tried all available ROMS official and not....but sometimes it works most of the times it dowsnt...
well program conflict is not the answer coz even after formatting i still have same problem....

What radio version are you guys using? I think I have 1.18.00. I am using Laurentius26's 2.05.00 ROM.

Guys,
Get a copy of TaskManager and check in the devices tab and check the wlan, also check your services tab.
It is likely that you either
1 Have a bad flash
2 Have a corrupt/unsigned driver
3 A hardware fault
My guess would be 2

Thanks for the response, Beast.
I see this: $device\WWN0(WWN0 Status: Loaded. Startup Type: Automatic. Dll: wwan.dll. Reg Key: Drivers\BuiltIn\WWN
I can stop it and restart it but it doesn't seem to do anything... Any ideas?

jrronimo said:
Thanks for the response, Beast.
I see this: $device\WWN0(WWN0 Status: Loaded. Startup Type: Automatic. Dll: wwan.dll. Reg Key: Drivers\BuiltIn\WWN
I can stop it and restart it but it doesn't seem to do anything... Any ideas?
Click to expand...
Click to collapse
check out ZCF1 (zero config) device.
is it okay/loaded? which dll it uses?
and is there any other device that's unloaded?

beast0898 said:
Guys,
Get a copy of TaskManager and check in the devices tab and check the wlan, also check your services tab.
It is likely that you either
1 Have a bad flash
2 Have a corrupt/unsigned driver
3 A hardware fault
My guess would be 2
Click to expand...
Click to collapse
Mine would be 3. I'm using your ROM, so I trust you didn't include bad drivers
Although when fixed the way I said, it works A-OK...

shlomki said:
check out ZCF1 (zero config) device.
is it okay/loaded? which dll it uses?
and is there any other device that's unloaded?
Click to expand...
Click to collapse
ZCF1 is loaded and using WZCSVC.dll.
There are 4 unloaded devices: DSK3, DSK2, COM8 and MIX1.
Thanks for your help as well. I hope we can get to the bottom of this.

mzalan - your problem seems different then jrronimo's.
mzalan's problem seems somewhat like something i experienced 2 days ago - relating to the wpa-tkip fix.
although i think your problem has nothing to do with the router, i think rebooting your phone is what does the trick. am i wrong?
i've made a cab for the wpa fix. after installing it my problems were gone.
give it a try - couldn't hurt.
jrronimo - maybe you should give it a shot also?

shlomki said:
although i think your problem has nothing to do with the router, i think rebooting your phone is what does the trick. am i wrong?
Click to expand...
Click to collapse
Yes, you are wrong, I must say. You see, this only happens in the dormitory where stay during weekdays at school. There is one wireless AP there, a small Linksys unit, which only stops working if there are many connections through it(solved, since I limited the number of clients in the DHCP to 10, whit a 30min lease. The tech-man forgot to set a new admin password), or if the flow is too great. My tech-savvy roommate says it dies because the processor is too weak to handle the flow or the many connections, and the firmware hangs, that's why it needs to be reset.
The other thing supporting me is that those are the times when everyone with a laptop in the dorms comes running to me, or just yelling down the corridor for me to "do something about the net". So it can't be my phone only.
The second case, where the icon shows me as connected, however, is only the fault of my phone, but even then the router needs to be turned off before I reboot the phone to sort of "shock WiFi system back into life". Luckily, this does not happen often. But these are the times when everyone keeps asking why there was a drop in the service...

shlomki said:
i've made a cab for the wpa fix. after installing it my problems were gone. give it a try - couldn't hurt.
jrronimo - maybe you should give it a shot also?
Click to expand...
Click to collapse
Well, I tried this and it didn't seem to help or hurt. I now see ZCF1: as having the driver wpatkip.dll but loaded or unloaded WiFi doesn't load.
A few times over the weekend, though, it WOULD load up (before I tried the .cab, I think)... but then it would turn itself off. Also, the page in the network settings where you would normally see a list of available access points is just sorta... gone.

sounds like your registry is corrupt. I would format the doc with mtty Task 28 55a and re-flash your rom mate.

That sounds scary but I'm certainly willing to try. The registry doesn't get overwritten when a new image is installed? Eesh.
So... what do I do? heh. I hate to be a noob about it but mtty is not something I've had to deal with before.

jrronimo said:
That sounds scary but I'm certainly willing to try. The registry doesn't get overwritten when a new image is installed? Eesh.
So... what do I do? heh. I hate to be a noob about it but mtty is not something I've had to deal with before.
Click to expand...
Click to collapse
Firstly you need to download MTTY, it's floating around this Forum somewhere.
Secondly read the wiki http://wiki.xda-developers.com/index.php?pagename=Universal_Technical
This has details of all commands accseible through MTTY.
Yes the reg should be cleared when flashing, however it requires user input to "Clear Storage" after a flash, and it is possible that the DOC is corrupted.
If you still have questions after searching on MTTY, post back and we'll give more help.

help ASAP

my problem is my webbroswers *both IE and Opera* does not connect to my cellar internet but only wifi
every other internet app works, Youtue, google map, etc Myphone seems to partly work but i think get stuck when sync'ing my contacts could be a bug with myphone so am discussing this with they expert team
so can anyone expalin why my web broswers is not working?
P.S Skyfire Beta works
Device = ATT Fuze
Rom = NATF v4.4 Fuze Edition

I've never had this problem, but then again never flashed one of NATF's roms. Try posting this question in the NATF rom thread. Good luck

every rom i tried this happen, atomic, NATF, Monex, etc

go to connection settings turn off the proxy check box

proxy is off, i dont like using proxy i live NYC by the way

What have you tried to solve the problem?
A soft reset?
Maybe you have nodata running, or forgot to activate the GPRS/3G connection before uninstalling it.

i tried 3 different rom, soft and hard reset, i tried the hidden proxy cab and remove proxy cab, tried manually setting the proxy, changing the default connection in the connection setting and all seem to not work

I must say this is a problem I haven't really read about yet (new to posting on the forum but not from reading)
If you do install nodata (cab on request), maybe you can check if the phone's data connection is enabled?
Maybe there are other factors then the forementioned program that can affect that setting.
It is a weird problem however, since other apps do have internet...

What if you start GoogleMaps to get the connection going, then open the browser. Does that let the browser connect?

it is very strange and what is this no data cab u mention
i have also used skype and it works, it kinda sucks that am limited to one broswer and thats skyfire, since its a beta also its not the greatest, my only other option is to turn on the wifi, connect to a access point and then it works, other than that i get opera nor IE to work which is very puzzling
also when i tap my h icon in the task bar it says am connected to medianet but it doesnt load
MrMoustache said:
I must say this is a problem I haven't really read about yet (new to posting on the forum but not from reading)
If you do install nodata (cab on request), maybe you can check if the phone's data connection is enabled?
Maybe there are other factors then the forementioned program that can affect that setting.
It is a weird problem however, since other apps do have internet...
Click to expand...
Click to collapse

thedocrn said:
What if you start GoogleMaps to get the connection going, then open the browser. Does that let the browser connect?
Click to expand...
Click to collapse
no broswer dont work at all only skyfire detects my connection and connects

i am gonna make a video and show u guys real quick
uploading vid on youtube.

allthatinny said:
it is very strange and what is this no data cab u mention
Click to expand...
Click to collapse
Nodata is an application that detects (GPRS/3G) dataconnections on your telephone and can switc them on or off.
http://forum.xda-developers.com/attachment.php?attachmentid=151212&d=1233148782
Because the other apps on your telephone do have internet, the chance of this thing working is very slim.
Good luck tough...

youtube is processing my vid, i will post the link a lil bit later
and i dont think that nodata stuff will work due to the fact that it might actually detect a internet connection like the rest of my applications but wont be able to figure out why just IE and Opera dont work.

ok as promise here is the link to the vid
http://www.youtube.com/watch?v=MAAqYWGATRc
look to the end of the vid where u see i put the wifi on and try to load opera and it works

allthatinny said:
ok as promise here is the link to the vid
http://www.youtube.com/watch?v=MAAqYWGATRc
look to the end of the vid where u see i put the wifi on and try to load opera and it works
Click to expand...
Click to collapse
Ok, I didnt see a connection setup wizard on your phone? Did you run that on setup during the initial boot over your phone. I would recommend running that again....I really didnt see it, which is odd did you do something with it?
Second, when you went into connections...then when you see media net click on proxy settings, make sure there is a check box on this network connects to the internet. and make sure the next box is not checked and there is nothing in the box....

this is a fuze edition rom so i guess thats why NATF left it out since fuze is orginally att. and is proxy a must cuz i tried using proxy before but it didnt work.

cant someone help me?

try going to your comm manager and disabling your data connection. This should disconnect you. After that, re-enable it and see what happens.

variablex said:
try going to your comm manager and disabling your data connection. This should disconnect you. After that, re-enable it and see what happens.
Click to expand...
Click to collapse
did that still didnt work, i also used the no data and disable my connection and re enable it and still didnt work.

[Q] HD2 wi-fi problem in cyanogenmod 7 v2.6

I've installed cyanogenmod on my HD2, and almost everything works perfectly. So far I love it, exept one thing: wi-fi is really unstable. Example: If I'm looking for apps in android market, it stops loading all the time. I can see this when the logos of the apps in the list wont load, and screenshots wont come up. But if I wait about 30 seconds it will work again. This doesn't happen when I use 3G, but that will be expensive after a while. Anyone know how to fix this?
Sorry for bad english, but I hope you guys understand the problem anyway

I had the same issue... You probably have a new virgin router? Anyway, re start your wifi router and try again

No, I have a D-link DIR655
Allready tried to restart it, no difference.

No solution,anyone?

lolkoz said:
No solution,anyone?
Click to expand...
Click to collapse
It is difficult, because i can be either caused by your phones wifi, but alot more likely by local wifi hardware.

I have the exact same problem but I'm running CMYLXGOs Stock Desire HD 1.1.7n. I've tried many routers and changing router settings. I've read that some people open up their phone and check that the WiFi antenae is properly connected. I've haven't tried that yet because I was hoping that it was something specific to the ROM I was using, but after reading your post I'm thinking of opening my phone and checking just to make sure.
I also thought that it might be a radio problem, but I haven't found any mention of my current radio causing this particular issue. If I finally decide to crack my phone open and this solves my problem I will let you know.
HTC HD2
ROM: CMYLXGOs Stock Desire HD 1.1.7n
Radio: 2.15.50.14
MAGLDR 1.13
HSPL 2.08

Hi, Same problem on HTC Legend.
I have tried different routers at different places as well, wifi isn't stable although I found rebooting your phone fixes it temporary.

dronchi said:
I have the exact same problem but I'm running CMYLXGOs Stock Desire HD 1.1.7n. I've tried many routers and changing router settings. I've read that some people open up their phone and check that the WiFi antenae is properly connected. I've haven't tried that yet because I was hoping that it was something specific to the ROM I was using, but after reading your post I'm thinking of opening my phone and checking just to make sure.
I also thought that it might be a radio problem, but I haven't found any mention of my current radio causing this particular issue. If I finally decide to crack my phone open and this solves my problem I will let you know.
HTC HD2
ROM: CMYLXGOs Stock Desire HD 1.1.7n
Radio: 2.15.50.14
MAGLDR 1.13
HSPL 2.08
Click to expand...
Click to collapse
My wife and I both had HD2s, and I loaded the same android software on both phones. On my phone, wifi worked perfectly. Wifi had a weird error message on my wife's phone. So weird since wifi worked fine on WM for both phones. I couldn't figure it out... tried a hundred different things including new software for both WM (new radio, the whole bit) and tried other Android ROMs. Finally, I decided to just get her a new handset. A nexus S.
Don't know if that info is helpful at all. What I think you can take from it is that some hardware may be wired wrong for wifi to work on android ROMs. It may not be a bad idea to open up the phone like the poster above recommended.

Wifi experienced tech head
Due to some builds are just about stable with 3G connection i would say its the auto IP addressing protocol not functioning in time for appropriate task at hand, usig HD2 as wifi router always works! CONCLUSION: set a static IP address from within wifi advanced options. And if you don't know how to enter or what to enter i reckon more reading and learning needs to take place before messing with a fone that worked perfectly before flashing it and ya don't know one piece of programming or instruction sets from Os to Os!
if default router is= 192.168.1.252
dynamic named server= 192.168.1.252
subnet= 255.255.255.0
static ip for HD2 can be set within range of ya router settings so if my default router is 252 at the end, by standard default your range could be from 1 - 252
depending on how many devices are on the network, choosing 89 and middle numbers will guaranty no IP conflicts!
you can use the IP app to find out what ya subnet is or use ya laptop or PC!
Wifi actually isn't a battery drain this way as it doesn't need to assign to another IP address when wifi wakes up again if fone was sleepin!

Gold_C DFT Error reporting

Hey all;
I saw some DFT clutter on some other ROM threads. It was suggested to make a new thread. I have permission from Mwang to make an error reporting thread so... here it is. Also... for all those who don't have DFT's ROM for the Gold_C you can PM Mwang for download instructions. I am working on getting permission to put links and dl instructions on this thread as well so look for updates. Thank you.

Has a newer version of the DFT rom for GOLD_C been released? One major bug is that wifi mac address changes with every reboot.

Still a badass rom!
N_ZzZ said:
Hey all;
I saw some DFT clutter on some other ROM threads. It was suggested to make a new thread. I have permission from Mwang to make an error reporting thread so... here it is. Also... for all those who don't have DFT's ROM for the Gold_C you can PM Mwang for download instructions. I am working on getting permission to put links and dl instructions on this thread as well so look for updates. Thank you.
Click to expand...
Click to collapse
-Some programs you cant see well unless you have the theme on dark, I think I read somewhere that it was a common bug in his wp7 roms.
-Maybe not a bug but an issue (If Mwang used sprints rom as a base) the sms bug that limits you to 160 characters per text is present like in the sprint rom
It is soo much better than the the official sprint rom tho

I have been having data connection issues. I will have full service and my data connection on and apps will say I have no connection. I have tried to update my network connection and prl and this continues to be an issue. For whatever reason I can usually go into internet explorer and go to a website and that will work and then return to an app I was having issues with and then the connection works. Seems really strange to me. Anybody else else having similar problems? Any solutions out there?
Sent from my PC93100 using XDA Windows Phone 7 App

I can't connect with zune anymore. Two hard resets and two reflashes later my phone is still not recognized by zune software.

I've been having issues sending MMS quite often. To fix it every time I have to go to Settings -> Cellular -> Change Network Profile & Change PRL. That and I have had a handful of random freezes occur all while in the Messaging Hub.

Zero9930 said:
I've been having issues sending MMS quite often. To fix it every time I have to go to Settings -> Cellular -> Change Network Profile & Change PRL. That and I have had a handful of random freezes occur all while in the Messaging Hub.
Click to expand...
Click to collapse
I had issues with mms too a hard reset resolved those

Is a newer version coming out soon for the Gold C that corrects the wifi mac issue?

N_ZzZ said:
I have been having data connection issues. I will have full service and my data connection on and apps will say I have no connection. I have tried to update my network connection and prl and this continues to be an issue. For whatever reason I can usually go into internet explorer and go to a website and that will work and then return to an app I was having issues with and then the connection works. Seems really strange to me. Anybody else else having similar problems? Any solutions out there?
Sent from my PC93100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I have had something similar, although I've found that the internet is working still but incredibly slow, even when connected to Wi-fi, it seems like even with Wi-fi on, the phone prefers to use the network connection. I've found that turning on airplane mode and then using Wi-fi makes the internet work fine and quick, but with both on it seems to go much slower (but not always). Other than that it seems to be working fine

HTC Arrive ROM ???/Issues
I love this ROM, much better then stock but when I am on a call and the computer voice says" press 1 for xxx press 2 for yyy" I press the buttons but the system doesn;t respond like I didn't press anything at all. Also the Speaker volume seems to be 1/2 as loud. Last but not least is there a GPS program I can d/l? I used navigator all the time but since this ROM doesn't come with it I don't know what to use.
Thanks for your time!
Q

quantum3 said:
I love this ROM, much better then stock but when I am on a call and the computer voice says" press 1 for xxx press 2 for yyy" I press the buttons but the system doesn;t respond like I didn't press anything at all. Also the Speaker volume seems to be 1/2 as loud. Last but not least is there a GPS program I can d/l? I used navigator all the time but since this ROM doesn't come with it I don't know what to use.
Thanks for your time!
Q
Click to expand...
Click to collapse
you can search for "TeleNav" in the market, "Waze" in the Bazaar, or you can search online for "Nokia Drive" xap where you would have to deploy from your computer. I'm not going to link to the Nokia Drive as I don't know how legal it is to do so.

quantum3 said:
I love this ROM, much better then stock but when I am on a call and the computer voice says" press 1 for xxx press 2 for yyy" I press the buttons but the system doesn;t respond like I didn't press anything at all. Also the Speaker volume seems to be 1/2 as loud. Last but not least is there a GPS program I can d/l? I used navigator all the time but since this ROM doesn't come with it I don't know what to use.
Thanks for your time!
Q
Click to expand...
Click to collapse
If you didn't yet, try a hard reset. That solved all my issues. I should have remembered that from the TP2 days...

I too am having issues with the internet speeds. My phone is constantly going into 1x. i can have full bars and it still goes 1x. even with Wifi on the phone still tries to use the cellular data and if that says 1x well its slow as hell. I have re flashed the rom and also done hard resets a few times, it didn't fix it for me, i mean it works great for a little while than the same problems persist.
According to what people are saying in ansar rom, it has the same problem with the connectivity. Hopefully there will be an update to fix this.
Another bug is that picture mail fails 95% of the time. i found that if you switch wifi off and than do a reset it usually works for a few times.
I wonder if we can fix our DATA issue if we input the APN settings into the rom. I used to run droid on my tp2 and we had to configure the APN for things to work as expected. I have searched around google and such and cannot find any working APN settings. Does anyone know of any that will work or have tried it?

Hey guys first off happy Easter to everyone! Secondly, I think I might have found a workaround for the WiFi cutting out on DFT sprint rom for the arrive. If you are on this rom and you have sprint well than you probably noticed the phone always going into 1x and than the WiFi taking forever to load. I had seen a post about shutting off cellular data and that was suppose to help. Well, I tried that and it worked for a little bit but than it stopped.
What I found is that if you change the network setting from automatic to home only that the WiFi no longer cuts out. The phone still says 1x but my WiFi hasn't cut one time and beforehand it was constantly working slow and or not working at all. Also, every picture mail that I have tried to send has went through without a single fail which it was a real pain in the butt to get one to send before. I haven't done too much testing as to whether the phone works better when not in WiFi but since I'm always in the office or at home, I'm always connected. But at least now it's working much much better!

Reg Settings for EVDO (3g is slow)
I have, like others, had similar issues. Also, after updating to the rom i noticed that the 3G speeds have dropped significantly (WIFI off).
I am clocking in at ~300k as opposed to 1.2Mb before even though the phone has 5 bars and EV.
I am not sure if this will provide any insight, or if I am even on the right track/know what i am talkin about, but if i browse the registry to
"HKLM\Comm\Cellular\DataSpeed"
There are settings for only 1xEVDO. Is this right?
What about EVDO rev A?
Thanks in advance for any input!

microfirmz said:
I have, like others, had similar issues. Also, after updating to the rom i noticed that the 3G speeds have dropped significantly (WIFI off).
I am clocking in at ~300k as opposed to 1.2Mb before even though the phone has 5 bars and EV.
I am not sure if this will provide any insight, or if I am even on the right track/know what i am talkin about, but if i browse the registry to
"HKLM\Comm\Cellular\DataSpeed"
There are settings for only 1xEVDO. Is this right?
What about EVDO rev A?
Thanks in advance for any input!
Click to expand...
Click to collapse
Doesn't seem like that's what that key is for according to this thread:
http://forum.xda-developers.com/showthread.php?t=907971&page=52