Database Info

[q] help flashing freinds g1

I said I would flash cyanogenmod on a friends G1 because he was fed up with 1.6. I've flashed many custom ROM's on several different devices before but I've made a mess of things with this G1 and I can hardly hand back an unusable phone so I would really appreciate your help.
I rooted the phone using Androot, backed up the apps and settings using titanium backup and then the texts using a text backup app. I then downloaded Rom manager and flashed the latest clockworkmod recovery. Next I downloaded the latest official cyanogenmod rom for the dream/g1 and placed it on the phones SD card using my computer. I then re-opened rom manager and used it to select the zip file from the sd (to flash it) on prompt I checked two boxes one to wipe data and one to wipe the dalvik cache and pressed ok.
The phone rebooted into the recovery wiped the stuff, supposedly flashed the rom and rebooted. However it got stuck on the t-mobile g1 boot screen(it never showed anything else first or anything after) I left it for ages with no joy. I then tried wiping from the recovery and flashing again - same thing so i put cm5 on and tried flashing that. Same problem. Then i realised that it probably would not work because I would need to use DangerSPL as the /system partition is too small on the dream/g1. To be honest at this point I can't be bothered with to do that and this guy will be happy with anything above 1.6 to be honest so I thought I would try and flash CM4 because that's based on Eclair I believe (and so it not require I use DangerSPL or any other method to repartition the NAND). However, I tried it twice and still no luck.
At this point I'm somewhat panicking as I cannot seem to make the phone boot and it isn't even mine! Is anyone able to help?

Anyone? Please?
Look, at this stage I will forget custom roms etc. If anyone can tell me the easiest way to get this phone booting android again i would be very grateful.
Even if you could just tell me exactly how to restore it to stock 1.6 from here?
I have flashed roms on phones before - never had a problem but this is driving me crazy - please help!

wollac11 said:
Hi I said I would flash cyanogenmod on a friends G1 coz he was pissed off with 1.6 but im having trouble and I can hardly hand back an unusable phone so i really need your help.
I rooted the phone using Androot, backed up the apps and settings using titanium backup and then the texts using a text backup app. I then downloaded Rom manager and flashed the latest clockworkmod recovery. Next I downloaded the latest official cyanogenmod rom for the dream/g1 and placed it on the phones SD card using my computer. I then re-opened rom manager and used it to select the zip file from the sd (to flash it) on prompt I checked two boxes one to wipe data and one to wipe the dalvik cache and pressed ok.
The phone rebooted into the recovery wiped the stuff, supposedly flashed the rom and rebooted. However it got stuck on the t-mobile g1 boot screen(it never showed anything else first or anything after) I left it for ages with no joy. I then tried wiping from the recovery and flashing again - same thing so i put cm5 on and tried flashing that. Same problem. Then i realised that it probably would not work coz i would need to use DangerSPL coz the /system partition is too small on the dream/g1. Tbh i'm tired so I cba to do that and this guy is not that technical so he will be happy with anything above 1.6 so I thought I do CM4 coz thats 2.0 or 2.1 i seem to remember (and it not require I use DangerSPL) - tried it twice and still not luck.
HOW THE HELL CAN A GET THIS STUPID THING TO WORK AGAIN!??
MAJOR PANIC AS THIS IS NOT MY PHONE - PLEASE HELP!!!
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=803482. I hope it helps.

It's been way too long since I rooted mine to be of any real help but I shall try nonetheless.
Firstly, there is a guide in the G1 forum to unroot and get back to stock firmware: Here (but note that I've never done this).
I must stress though (admittedly from memory) that if you have flashed an SPL or radio image at all, be VERY careful about the order in which you revert back to stock (or go to get a custom ROM depending on which way you decide to go). The G1 is very picky, and flashing things (mostly SPL and radio IIRC) in the wrong order will brick the device. That said, if you follow the instructions you find to the letter you should be OK. But yeah, read twice, flash once.
There is a lot of information in the stickies in the G1 forum. It could take a while to wade through but it should all be there. Failing that, post in the Q&A or General G1 subforums and I'm sure a current user will help you out.
I apologise if I've just posted a bunch of stuff you already know/have read - like I said, I've not used the phone in a while - just trying to offer what I can.

Thanks
No worries now guys i've done it! It was quite complicated but its all sorted now. If anyone is trying this and has the same (or similar) issue then pm me and I will tell you how I sorted it.
Otherwise thanks guys and you can conciser this thread:
---------------------closed--------------------------

Clueless what to do next?

Hi
I'm completely clueless as to what to do next here. I've rooted my Xoom which worked and was fully functional, etc.
Now I wanted to try the Tiamat ROM. I installed Clockword Mod Recovery from the ROM Manager yesterday. It reads version 4.0.0.4. Now I downloaded the ROM and tried to install via clock word but nothing happens. What's worse now is that my Wifi says "error" and can't be turned on.
At this point if someone can point me in the right direction to getting the ROM installed, I would greatly appreciate it. If not, I'll also go for stock 3.1 rooted if that's possible at this point.
Please help me out
Thanks

This exact same thing happened to me. Made me really nervous and I wound up rolling back to stock and rerooting - all unnecessarily. All you need to do is put the Tiamat recovery back on, wipe your data (yes, everything on your internal storage, so make a backup), and install Tiamat 1.1 from an SD card. I detailed my experience with instructions for another person on how to fix it in this thread:
http://forum.xda-developers.com/showthread.php?t=1152121
Any questions just ask.

mikeserv said:
This exact same thing happened to me. Made me really nervous and I wound up rolling back to stock and rerooting - all unnecessarily. All you need to do is put the Tiamat recovery back on, wipe your data (yes, everything on your internal storage, so make a backup), and install Tiamat 1.1 from an SD card. I detailed my experience with instructions for another person on how to fix it in this thread:
http://forum.xda-developers.com/showthread.php?t=1152121
Any questions just ask.
Click to expand...
Click to collapse
I've been trying to warn people about that incompatible recovery from Rom Manager for several weeks. I wish we could have a sticky post about it. So many people fall into that trap and get all messed up. I know cause it happened to me.

[Q] Darn boot problems, MIUI on Samsung Infuse

Forgive the title, I need it to make it interesting to get some views. Now that's said, let me get to it.
I recently tried to flash MIUI onto my Samsung Infuse. I had Infused ROM v.2.2.3. I must have messed up because now I'm having trouble getting my phone to start. When I power on, it briefly shows the Samsung logo (for about 3 sec); then for split second an alternate screen flashes on my screen just before my phone shuts off. Now, I've tried to load CWM(red version) with the 2/3 button technique; however, I haven't been able to get into that GUI.
I have been able to get into the Download screen, for Odin. But, I was hoping there might be some sort of way to solve this problem without resetting my phone to stock.
Questions
1. Can I utilize the Download screen to re-implement or re-flash my ROMs on my phone; without loosing data
2. Is there a way that I can force my way into the CWM GUI?
3 If none of the above are possible, where can I get information Odin for the Infuse; and where can I download the program?
Thank you for reading, and thanks for the help in advance!
Joaquin

I wasn't going to reply to your thread but you caught me in a good mood. head over to the dev forum and you will find everything you need to get your phone back. That's all I'm goin to give you. the more you search and experiment the more you will learn

Already found somethings that are helping...
I didn't post for as a resource, just thought that if someone knew where to look they'd point me in the right place.
For anyone who might need a nudge; this link will direct you to complete recovery http://forum.xda-developers.com/showthread.php?t=1092021

Did you follow the directions exactly as it says? Did you ever get into blue cwm and flash miui a second time?
Sent from my SGH-I997

I wouldn't recommend MIUI to anyone who isn't atleast a little experienced in flashing ROMs, and are sure won't panic if they find their system soft bricked.

went to http://galnetmiui.co.uk/landing/weekly-builds/ downloaded infuse rom using miui build 112230 wiped data,cache,dalvik applied installed galnet miui rebooted does not load stays on samsung logo wiped data,cache,dalvik reinstalled galnet does not work, used blue cwm, returned phone to stock froyo, using odin reinstalled galnet using green cwm, still doesnt work, dont know what im doing wrong, please help, do i need to install gb bootloaders?
Sent from my SGH-I997 using xda premium

[Q] Error mounting sd card in CWM

Okay so I've been all over this site and linked to many other articles to proceed and hope to fix my issue but nothing seems to be working for me. To get you guys up to speed it's a SGH-T959V and I started out with having jelly bean 4.0 on it then upgraded to 4.2.2 which I occurred an issue with that and had to revert to getting gingerbread flashed back on. It's been a little while since I've done so and kinda forgot how I did it. I've read about using odin and heimdall but no luck getting my phone to connect with either of those programs.
Recently upgraded to 4.4.2 slimkat which was working good (still some bugs, since it's weekly) and had TWRP recovery on it. Problem started as I was starting the process to flash the new update of 4.4.2 and I created a back up and recovery for it prior to flash but now its gone. During the flash of the new update it had occurred some error and now went to Semaphore CWM Recovery v6.0.4.5 and has a bunch of errors to it and I cant even format or mount an sd card. I've tried using a couple different sd cards same issues. I can boot into download mode no issues.
Anyone be able to help me out? I am pretty stumped on this one and have tried many things to get it to work. Also are there any programs I could use besides odin and heimdall to flash a different version of CWM or TWRP via usb?
Thanks guys let me know if I left anything out or if you have questions to help me out better.

Hey guys, here are a couple of pictures of what it looks like while in CWM and what its saying.

Hey guys never mind, I already figured out what I was doing wrong. All I needed to do what open a file I downloaded in this thread to get it back to stock gingerbread. Now I am going to do some more flashing to get it back to 4.4.2 slimkat. Thanks

[Q] I can't load CWM on my SGS 4G (T-Mobile)

Hello all,
Okay, I admit that I am gonna get a lot of "use the search tool first" replies, but please hear me out. I have done my fair share of searching. Its not that I haven't found anything, its just the things I found are useless for this SGS 4G. I really wanted to install Cyanogen Mo on the SGS (its not actually mine, a friend asked me to do it since he saw my old SGS GT-I9000 running CM).
I am gonna try and give a detailed report . The phone was originally from T-Mobile and now unlocked permanently. Its running firmware version 2.3.3 that I installed just recently. I found out that I can't install CWM on the stock kernel or bootloader or whatever and I needed a new of the thing. So I went on searching and searching....found a handful of help but none work. Every method breaks at some point and I go to the "firmware update failed" thing on the phone, which I then install 2.3.3 again using ODIN and try another method. I have tried a lot of things. Hemidall, ODIN, SuperOneClick, and a lot of gibbrish-sounding methods. None work. I am now running 2.3.3. Here are some infos:
ABOUT PHONE:
Model Number: SGH-T959V
Firmware Version: 2.3.3
Baseband Version: T959VUVKF1
Kernel Version: 2.6.35.7-T959VUVKF1-CL270364
Build Number: GINGERBREAD.VUVKF1
The files I used to flash to 2.3.3 using ODIN v1.85:
PIT: Hawk_Sidekick_VibrantPlus_831.pit
PDA: CODE_T959VUVKF1_CL270364_REV00_user_low_noship.tar.md5
PHONE: T959VUVKF1-Phone-CL1020302.tar.md5
CSC: SGH-T959V-CSC-TMB-VIBRANTP.tar.md5
I hope the above infos are enough. So, can anyone help me and point me to the right direction on how to install CWM and then install CM10 or 9 on my friends SGS 4G?
Thanks,
Tamrat

Hmmm, an interesting set of binaries, ones that don't ring a bell with me. I'm used to seeing T959VUVKJ6.
Where did you find those? Half curiosity, half trying to understand the problem, half since much of the "old" images for the phones got lost when Multiupload and what have you were shut down.
For the SGS4G, the kernel, root file system, and recovery file system are all in "boot.img" -- flash one, you flash them all. They can be flashed through Odin (assuming you really like Windows), heimdall (multi-platform), through recovery, or from a root command line (for the adventurous only).
I would say the most robust way to get where you need to be would be to use Lumin's guide to make sure you've got a viable Gingerbread set-up going, then flash something reliable to get you to MTD, like TeamAcid's CM9.
From there, you should know that some of the KK ROMs use slightly different MTD partitioning and aren't a "just flash this ROM and keep your data" kind of thing.

jeffsf said:
Hmmm, an interesting set of binaries, ones that don't ring a bell with me. I'm used to seeing T959VUVKJ6.
Where did you find those? Half curiosity, half trying to understand the problem, half since much of the "old" images for the phones got lost when Multiupload and what have you were shut down.
Click to expand...
Click to collapse
A long day Googling... and then a site turned up. One thing I forgot to mention was, before I installed this firmware, I had to use the "remove battery->plug usb->press the button combos->insert the battery" to enter download mode, but now I juts have to press vol down and power button.
Thanks for the reply,

Failure again
UPDATE:::
I tried to update to 2.3.6 as the guide suggests and I also wanted a clean stock OS in case the old one was not. But once again updating to 2.3.6 has been a pain. Kies Mini recognizes the phone but it doesn't recognize the firmware running on the phone. And also, firmware update is impossible since the button is greyed out.
I googled again and found the official 2.3.6 firmware for the phone (file name: T959VUVKJ6-REV00-home-low-CL694130.tar.md5) and tried flashing it using ODIN; absolutely no luck. It fails at the stage which says Slb.bin. Restarting the phone after that gives a "firmware upgrade failure" display. Only way to wake up the phone is to flash the previous OS back.
I am really confused here.
*********************EDIT***************
Some how, after like 10 retires and fiddling with ODIN, it finally flashed 2.3.6 to the SGS 4G. Still, fingers crossed.
*********************EDIT 2***************
Finally, its all working fine now. Thank you @jeffsf, thank you very much.

F*****************K
forgot an important step and now my IEMI number is gone........
do i throw the phone now, or is there any other way???

Don't throw your phone away! How do you know that you have "no IMEI" on your phone? We'll go from there.

Hopefully, you've backed up your data before starting to play around with ROMS. If so just load your backed up efs folder onto your storage & use Root Explorer to drop it over your existing one , it will overwrite your imei file & you will be good as new.
========================================================================================
I'm also in need of help, I have been running SlimSaber since last weekend, was wanting to try out Beanstalk. First full wipe, install & reboot wipe again, reinstall etc as per Dao's OP, but after the first install, it won't boot past the kernel splash. Tried again with same result. Decided to click it back to stock & start over, using Gremlin Remover (odin). Then saw that others were having similar issue so I tried to load in build from April1st.
But now it only boots back into recovery, won't boot to the OS ( everything indicated install was complete & no errors.)
1 clicked back again & just tried to put SlimSaber back on again, but have the same problem, will only boot into recovery.
I had to first load CM9 to get CWM 6.xx so I could install kk using TWRP
What am I not doing correctly? Thanks for any suggestions.

Flash kernel
Reboot recovery
Wipe all partitions
(Reboot recovery for good measure and wipe again if paranoid)
Install
Boot
If that doesn't do it, it is likely ROM or hardware.
---
Posted from whatever phone booted today

Since this is running GB VUVKG4, could you recommend a kernel that would work & get me to TWRP (or CWM 5.xx+)?

Either the Team Acid CM9 or Hefe Kernel should work.
---
Posted from whatever phone booted today