Any working microsim adapters? - Nexus One Accessories

Hoping one of you might be able to point me in the right direction.
I have a Nexus One that I would like to use a MicroSim on. I have tried two different brand of adapters, and found that both of them are too "think" to fit into the Nexus. What happens is, after getting about 1/4th of the way in, it gets really tight. At that point, it can be forced in, which I did up to about half way. When I tried to take it back out, I had to use pliers afterward.
So, obviously I am worried about breaking the Nexus is I try to go further with these ones I have bought. The Nexus still works, and is wonderful with a normal Sim. But I would really like to get this Micro working.
Also, just as it is important to note, I have made sure I am inserting it the first direction, the notch is in the right place, etc. It is really coming down to how think the adapter is.
What I think I need here is as thin an adapter as I can find. Anyone have any suggestions on one to try, and where I might be able to buy it? Also, if anyone has successfully used a microsim adapter I would love to hear it.
Thanks
Jim

Why dont you just cut up a plastic card? just print out a stencil and cut yourself an adapter

miketlo said:
Why dont you just cut up a plastic card? just print out a stencil and cut yourself an adapter
Click to expand...
Click to collapse
Thats not a bad idea, but frankly I suck so bad at making anything by hand it is normally easier, and higher success rate, to just buy something most of time.
On the other hand, based off of the amount of information I have been able to dig up on this (in other words, next to nothing), I might just have to give that a shot.
Thanks
Jim

Why do you want to use a micro sim card, can't you just ask your carrier to give you a fullsized sim card?

Well since there are only about 2 devices that are popular which use micro sims, hes probably sharing a plan between his nexus with an iphone/ipad.

Both of these are tested and working on my Nexus One. The Amazon one being a more secure fit for the card. The links are to the stores actually purchased from so should be exactly the same.
http://www.amazon.com/gp/product/B003OG8G6W/ref=oss_product
http://negrielectronics.com/mini-uicc-microsim-adapter.html
I switch the SIM back and forth with my IP4 and Nexus One all the time and both are solid. No flames please. I'm still an Android guy. The IP4 was purchased cheap from someone who didn't like it.

If its too think maybe try some sandpaper on the adapter? It really shouldnt take much sanding to get it to fit

agriff said:
Both of these are tested and working on my Nexus One. The Amazon one being a more secure fit for the card. The links are to the stores actually purchased from so should be exactly the same.
http://www.amazon.com/gp/product/B003OG8G6W/ref=oss_product
http://negrielectronics.com/mini-uicc-microsim-adapter.html
Click to expand...
Click to collapse
Wonderful. Thanks for the links, I will try this out and see how it works.
Thanks
Jim

ilikepie said:
If its too think maybe try some sandpaper on the adapter? It really shouldnt take much sanding to get it to fit
Click to expand...
Click to collapse
Yeah, thats not a bad idea at all. Putting that in my back pocket...

Elwood_nexus said:
Yeah, thats not a bad idea at all. Putting that in my back pocket...
Click to expand...
Click to collapse
That should be your first plan. Sand it a little then if that doesnt work spend the money to get the other adapter

+1 on the Amazon one.
I use it myself and it works perfectly. Much better than others I've used.

FYI - I bought a total of three of the adapters from Amazon. The one linked earlier in this thread is the only one that would fit.
So thanks for the link to it!
And yeah, I was lazy and never sanded anything down. Sorry, but my luck I would screw that up. I am not handy in anyway at all.
Thanks for all the great suggestions everyone.

Related

Interesting - car kits & cradles - with photos!

Anyone bought from these guys?
http://4u-kidi.com/product.php?form=PDA AND SMARTPHONE&mode=10&name=GOOGLE
The Google Nexus One PDA CAR KIT is an absolute bargain
sd00 said:
Anyone bought from these guys?
http://4u-kidi.com/product.php?form=PDA AND SMARTPHONE&mode=10&name=GOOGLE
The Google Nexus One PDA CAR KIT is an absolute bargain
Click to expand...
Click to collapse
sweet find. thank you
RussianSolja said:
sweet find. thank you
Click to expand...
Click to collapse
No probs, your welcome. Now all we need is for someone to buy one & feed back (sorry, I spent all my money on my Nexus one, i am broke (damn you Google))
Steve.
Oh my.
Google Nexus One PDA Bicycle Phone Holder.
Scary.
sd00 said:
No probs, your welcome. Now all we need is for someone to buy one & feed back (sorry, I spent all my money on my Nexus one, i am broke (damn you Google))
Steve.
Click to expand...
Click to collapse
ill buy a set just for the hell of it.
UPDATE: Why is where no price for the first two car kits?
mjwatmough said:
Oh my.
Google Nexus One PDA Bicycle Phone Holder.
Scary.
Click to expand...
Click to collapse
eeekkk. that's asking for a road kill LMFAO!
I used my Hero on the bike.
Great when going for long cycle rides to track the distance/elevation...etc.
Never even worried me as the holders are very good.
Trying to buy a carkit now, well at $0 I thought "why not!" .....
Just trying to pay but Paypal is in Japanese or Chinese.
It would be fun on a bike but I think I'd be scared. Maybe in a few months I'll be less precious about it.
Change Paypal language to English in top right.
Just bought the Cradle with 2nd Battery Charger + Stylus + Anti-Static and UV Treatment.
Stylus? And how's the anti static and UV thing work?
Will try post pics and write a review when it turns up.
RussianSolja said:
eeekkk. that's asking for a road kill LMFAO!
Click to expand...
Click to collapse
I think it would be a hell of alot better than trying to determine whether or not I just ran over a bump or my phone just vibrated... Id consider it, Seriously!
mjwatmough said:
It would be fun on a bike but I think I'd be scared. Maybe in a few months I'll be less precious about it.
Change Paypal language to English in top right.
Just bought the Cradle with 2nd Battery Charger + Stylus + Anti-Static and UV Treatment.
Stylus? And how's the anti static and UV thing work?
Will try post pics and write a review when it turns up.
Click to expand...
Click to collapse
Cool, hope u get them soon. looking forward to your feedback!
mjwatmough said:
It would be fun on a bike but I think I'd be scared. Maybe in a few months I'll be less precious about it.
Change Paypal language to English in top right.
Just bought the Cradle with 2nd Battery Charger + Stylus + Anti-Static and UV Treatment.
Stylus? And how's the anti static and UV thing work?
Will try post pics and write a review when it turns up.
Click to expand...
Click to collapse
ahhh ok i got it to work. i want the car dock but there's no price. also as far as a Stylus goes.... where did you go for that?
UPDATE: Ahh i see it. what makes you so sure the Stylus they are sending you will be a Capacitive Stylus?
RussianSolja said:
where did you for for that?
Click to expand...
Click to collapse
Do you mean 'where did I find that?' On this page
Its all in Chinese when you try and check out... Not sure how trustworthy this site is...Anyone bought anything?
RussianSolja said:
what makes you so sure the Stylus they are sending you will be a Capacitive Stylus? [/B]
Click to expand...
Click to collapse
Not really expecting it to be, dunno. We'll find out I guess.
Slimgym: It does take you to the Hong Kong landing page of Paypal, but it definitely is Paypal so meh.. should be reet.
There is an option to change it to English up top. I am an idiot.
mjwatmough said:
Not really expecting it to be, dunno. We'll find out I guess.
Slimgym: It does take you to the Hong Kong landing page of Paypal, but it definitely is Paypal so meh.. should be reet.
Click to expand...
Click to collapse
the stylus wont work if it aint a Capacitive Stylus
RussianSolja said:
the stylus wont work if it aint a Capacitive Stylus
Click to expand...
Click to collapse
Nope, but I'm not that bothered about a stylus. Should be interesting to see how sturdy it is. Don't like the look of how close the track ball is to the base, for $26 it's worth finding out though.
I know this has probably been answered elsewhere, but the dock connections on the bottom of the Nexus, are we to assume they do charging and data connection without having to have a plug go into the micro USB port?
mjwatmough said:
Nope, but I'm not that bothered about a stylus. Should be interesting to see how sturdy it is. Don't like the look of how close the track ball is to the base, for $26 it's worth finding out though.
I know this has probably been answered elsewhere, but the dock connections on the bottom of the Nexus, are we to assume they do charging and data connection without having to have a plug go into the micro USB port?
Click to expand...
Click to collapse
yeah you do got a point. i mean for $26 bucks you cant really go wrong. ill stay tuned to this thread to see your review of the product. what was the total cost with shipping? and where did it get shipped to? what state that is?
mjwatmough said:
Nope, but I'm not that bothered about a stylus. Should be interesting to see how sturdy it is. Don't like the look of how close the track ball is to the base, for $26 it's worth finding out though.
I know this has probably been answered elsewhere, but the dock connections on the bottom of the Nexus, are we to assume they do charging and data connection without having to have a plug go into the micro USB port?
Click to expand...
Click to collapse
yeah. im guessing your guess is as good as mine. but for some strange i believe that the dock that you ordered will be charging using a USB connection. but like i said ill keep my eye on this thread to see how you make out.
It appears they do that unfathomable thing of shipping free worldwide like some Chinese companies seem to be able to do. Mine's being shipped to the UK.

Brodit Active Holder for Nexus One

Just ordered me one of those.
I hate universal holders and I hate passive holders. This seems like the best choice right now, since the official merchandise is still not in sight...
http://www.pdashop.nl/product/90916/brodit-active-holder-google-nexus-one.html
I have one. It works super. You'll be really happy with it.
Google is missing the boat huge on this car dock.
That's good to hear, MadFlava. I had one of those for my previous phone (Touch Diamond) and that one has served me perfectly too.
Installed mine yesterday. I love it. The cords are ugly but I'll work on that when I get a chance.
Yup, I have one and would recommend them too
Well, received mine today, and... my Nexus One does not fit??? It will not slide far enough over the micro-usb connection.... any of you guys experienced anything like this?
It does not charge now... and there's like 2mm of space left between the bottom of my Nexus One and the holder.. I've used force to some extent, but it just will not slide any further..
Snooker said:
Well, received mine today, and... my Nexus One does not fit??? It will not slide far enough over the micro-usb connection.... any of you guys experienced anything like this?
It does not charge now... and there's like 2mm of space left between the bottom of my Nexus One and the holder.. I've used force to some extent, but it just will not slide any further..
Click to expand...
Click to collapse
I'm new here so I can't post links but go to androidforums.com and search for the thread ProClip Mounting System. In there you'll find a guy (dbpaddler) that has a lot of knowledge about these mounts. He's a re-seller for Brodit I think. Tell him about your problem and maybe he can help.
Snooker said:
Well, received mine today, and... my Nexus One does not fit??? It will not slide far enough over the micro-usb connection.... any of you guys experienced anything like this?
It does not charge now... and there's like 2mm of space left between the bottom of my Nexus One and the holder.. I've used force to some extent, but it just will not slide any further..
Click to expand...
Click to collapse
Sounds very odd. Can you post us a few pictures of what's going on?
See attachment. The micro-usb connector in the holder is about 4.5mm high, but my Nexus One will only slide over it like for 2mm and then it feels like it is blocked by something. I've used force, but no movement whatsoever.
I find it strange too.. I don't see anything odd on the connector, nor on the female connector on my Nexus One. I guess I'll take it back to the store...
How odd. It looks like the connector is slightly left of centre, if you use the trackball to be centre... no jiggling will make it fit?
It may look a bit off-centre due to my photography skills, it looks okay in real life. Jiggling or forcing does not help unfortunately. Of course the connector that came with my Nexus One charger fits nicely, and I don't see any peculiarities when I compare it to the one on the Brodit.
Anyhow, I logged an issue with the webshop that I bought it from and they happen to have a brick-and-mortar store some 50km from here, so I may drop by to demonstrate my problem. Thanks for your help.
Do you have a body skin on the phone?
Nope, no skin. Going to the store later today to have the holder replaced, they think it may just be a faulty unit. Will keep you all posted.
Well, guess what.... just returned from the store, and the replacement holder that they offered had exactly the same problem. The sales guy was as astonished as I was. Personally he had not sold any of these, since the Nexus One is officially not available yet here in the Netherlands, so demand is minimal, but it makes me wonder if I'm really the only one with this problem, and whether my specific Nexus One could be the problem...
Anyway, he took mine back and I was fully refunded, so kudos for pdashop.nl.
Downside: still no carmount for me.
I have one too, it does fit but, I had to wiggle it a little bit to get it in......
It was not just straight forward. I will have a go tonight and see if it still play hard to get.
anyway once plugged, it worked fine for me.
We (both me and the sales guy in the store) used force and wiggled, but to no avail. Besides, I don't want a holder that needs wiggling in the first place. I want it to fit perfectly. That's why I do not buy a universal holder but a Nexus-specific one.
I got mine and it fits perfect.
jeux_1 said:
I have one too, it does fit but, I had to wiggle it a little bit to get it in......
It was not just straight forward. I will have a go tonight and see if it still play hard to get.
anyway once plugged, it worked fine for me.
Click to expand...
Click to collapse
Yeah update, just tried and fitted like a glove. must have loosen up
does the charger model charge the phone at 500ma or 1000ma? can someone with one check the settings and see if it says charging usb or ac?
The Site is not in english. how do you guys understand what information to fill out when ordering? also can you guys please post some pics? with the dock already in place? just wondering what its going to look like in my car.

Small / Keychain-able USB-micorUSB Charging cable

Due to an appauling battery life on the othewise brilliant "superphone", I am trying to find a solution where I can charge it often using a USB port in computers/laptops etc at workplace or outside.
Has anyone come across a USB-micorUSB charging cable which is available like a small dangle we can attach to a key chain/ring? I have seen retractable ones on the internet, they are not small enough to be attached to a keyring. Any experience?
Thanks.
This is the best I've seen but it is out of stock. =|
http://www.amazon.co.uk/Scosche-USB...2?ie=UTF8&s=electronics&qid=1272120596&sr=8-2
inkino.co.uk/zen/index.php?main_page=product_info&products_id=3740
Any use?
EroThraX said:
This is the best I've seen but it is out of stock. =|
Click to expand...
Click to collapse
I have this. works great with my Magic. Unfortunately even the scosche website is temporarily sold out.
scosche.com/products/productID/1907
edited.
Ive been here for over 4 years, first my post count resets so now I'm a noob all over again and now I cant even post links anymore. Not even from quotes. WTF!?!?! [email protected]
http://www.dealextreme.com/details.dx/sku.20777
What about this?
dougalls said:
What about this?
Click to expand...
Click to collapse
That looks to be Mini USB not the Micro USB we need, but good find
dougalls said:
dealextreme.com/details.dx/sku.20777
What about this?
Click to expand...
Click to collapse
I wonder if that would work or not.
The small clip that holds the 2 sides together looks like it could potentially get in the way when connecting the mini usb to some phones.
Sadly, they seem to be sold out as well.
Good find none the less.
http://mobile.brando.com/strap-charging-cable-micro-usb_p03200c0704d003.html
i just ordered one
Ooo
Thats a nice one.
Even better, It'll always be with your phone.
I'll have to get a couple. Great find. Thanks. =]
msgnyc said:
Ooo
Thats a nice one.
Even better, It'll always be with your phone.
I'll have to get a couple. Great find. Thanks. =]
Click to expand...
Click to collapse
But the Desire doesn't have a thing for attaching straps/lanyards?
jamiepyrite said:
But the Desire doesn't have a thing for attaching straps/lanyards?
Click to expand...
Click to collapse
I have multiple phones and am always swaping them around depending on my mood. Thiat's why I will never switch to Verizon or Sprint. The advantages of a GSM phone. =P
I don't have a desire so I cant verify whether or not it has a lanyard slot.
I'm one of the unfortunate ones praying that AT&T will announce they will be getting the desire. =[
msgnyc said:
I have multiple phones and am always swaping them around depending on my mood. Thiat's why I will never switch to Verizon or Sprint. The advantages of a GSM phone. =P
I don't have a desire so I cant verify whether or not it has a lanyard slot.
I'm one of the unfortunate ones praying that AT&T will announce they will be getting the desire. =[
Click to expand...
Click to collapse
Ahh
Well I got excited, then checked my Desire and realised it doesn't have the hole for a lanyard!
jamiepyrite said:
Ahh
Well I got excited, then checked my Desire and realised it doesn't have the hole for a lanyard!
Click to expand...
Click to collapse
Well now that sucks. That lanyard sycn cable is like perfect to. =(
Not a sync cable!
evilangelic said:
That looks to be Mini USB not the Micro USB we need, but good find
Click to expand...
Click to collapse
I have the non TF card reader version of this and whilst it's a neat little device, it charges but DOES NOT SYNC.
msgnyc said:
Well now that sucks. That lanyard sycn cable is like perfect to. =(
Click to expand...
Click to collapse
If you have a gel or silicon case you could always make a small hole at the bottom to fit the lanyard through...
Just seen this on ebay too.
http://cgi.ebay.co.uk/HTC-Desire-Da...ting_LaptopAccessories_RL&hash=item35a9069053
http://www.smartcable.com.au/product.asp?id=17 - not sure if it is compatible but seems to have a micro usb connector from what I can see.
That last one looks great, they have both the S series and W series connectors on there that look cool. ( I like the look of the W series as it looks a bit smaller and thats the point of the cable.) But can anyone see where we can actually buy these?
edit- They have an eBay shop SmartcablesUK, and they are about £5 inc delivery for the W series ones!!! So even if they are shoddy quality, that's not bad at all!
Love the look of those! Have on on order now, I'll let you know how well it works when it gets here
tinytom21 said:
That last one looks great, they have both the S series and W series connectors on there that look cool. ( I like the look of the W series as it looks a bit smaller and thats the point of the cable.) But can anyone see where we can actually buy these?
edit- They have an eBay shop SmartcablesUK, and they are about £5 inc delivery for the W series ones!!! So even if they are shoddy quality, that's not bad at all!
Click to expand...
Click to collapse
you mean for this one ?
http://cgi.ebay.co.uk/SMARTCABLE-No...essories_RL&hash=item27a93ad85d#ht_1752wt_939
It will work with HTC Desire ?

[Q] can you remove the back cover on a XOOM?

so, like an idiot, I accidentally dropped a micro sd card into the top slot of my wifi xoom, and it fell into a slot that it shouldnt have...it's stuck in the there, and I cant shake it out..now the slot cover wont fit back in..
Is there any way to open the back of this thing up, so I can remove it, or, am I SOL?
thanks!
wase4711 said:
so, like an idiot, I accidentally dropped a micro sd card into the top slot of my wifi xoom, and it fell into a slot that it shouldnt have...it's stuck in the there, and I cant shake it out..now the slot cover wont fit back in..
Is there any way to open the back of this thing up, so I can remove it, or, am I SOL?
thanks!
Click to expand...
Click to collapse
http://tinyurl.com/5rrne45
I was going to be a real jerk and just reply with "Yes" but felt I could be a little helpful. Honestly, there are several posts similar to this in the Xoom forums.
yeah, I saw that, I dont have a t5 torx screwdriver..
I wonder if I take it to the geek squad guys, since I bought it at Best buy, if they could pop off the back for me and grab it..
thanks, man..
wase4711 said:
yeah, I saw that, I dont have a t5 torx screwdriver..
I wonder if I take it to the geek squad guys, since I bought it at Best buy, if they could pop off the back for me and grab it..
thanks, man..
Click to expand...
Click to collapse
They'll charge you for the privilege of having your Xoom held in their hands. Do it yourself dude. Just go and buy a torx screwdriver.
I strongly encourage you to pick up a Torx driver set, they are relatively inexpensive and you will find the ROI to be much greater than paying someone to do it for you.
Personal experience, My T6 worked fine too. Instead of a spudger, I used a few bent paper clips, I think a cut up gift/credit card would work better though.
well, I went to BB, and saw a buddy of mine there; he walked me over to the Geek Squad, told them to take care of me, and the guy did it for free!!
You guys are right; its time to buy a set of tiny torx screwdrivers..
thanks for all your suggestions!
There was another user, several months ago, who managed to extrack his SD card by using a pair of tweezers, holding his Xoom upside down and shaking it. Said that it took multiple tries...

[Q] MiniSIM to MicroSIM

Has anyone had success with cutting their MiniSIM to MicroSIM format?
I just got my Nexus 5 today and did not realize it needs a MicroSIM. I was just going to use my old phone's MiniSIM and was able to research I might still be able to do that by cutting it into the right format. It seems simple enough and I downloaded and printed template, but I wanted to hear some firsthand experiences before I give it a go.
No one ever had success at cutting it
---------- Post added at 06:32 PM ---------- Previous post was at 06:31 PM ----------
It can't be done
Caebron said:
Has anyone had success with cutting their MiniSIM to MicroSIM format?
I just got my Nexus 5 today and did not realize it needs a MicroSIM. I was just going to use my old phone's MiniSIM and was able to research I might still be able to do that by cutting it into the right format. It seems simple enough and I downloaded and printed template, but I wanted to hear some firsthand experiences before I give it a go.
Click to expand...
Click to collapse
I've done it... it works fine.
Just make it a little bigger to start with and then fine-tune it with a nail file or similar.
Also don't force it into the slot if it still seems too wide or you might get it jammed and damage the slot.
ApriliaM3 said:
I've done it... it works fine.
Just make it a little bigger to start with and then fine-tune it with a nail file or similar.
Also don't force it into the slot if it still seems too wide or you might get it jammed and damage the slot.
Click to expand...
Click to collapse
I'm glad I posted, the nail file is a good idea I would have missed otherwise.
Just to report back, it worked like a charm and cost me maybe 3-4 mins. I used one of the many templates one can find online, stuck the SIM to the printout using double-sided tape and then used a utility blade to cut the card,applying lots of presure with one my fingers on the card to hold the card in place. I didn't even need the file.
You know your network provider will just send you out one for free if you phone and ask
Sent from my Nexus 5 using Tapatalk
Why do people bother cutting SIM cards? Why not just get the right SIM card from your carrier? If your carrier is so pretentious that they would charge you to swap a SIM card, I'd seriously reconsider buying your service from them in the first place.
T-Mobile is pretty good about giving out free SIM cards. I just didn't want to wait. And I enjoy DIY :good:

Categories

Resources