Related
Hey guys, this is going to be my first post up here, usually just read up and find what I need no problem but today my first problem arose with my G1. I'll wrap it up quickly:
-Just got a new G1 through an insurance claim.
-Rooted no problem running SuperD v1.9.2
-Curiosity got the best of me and I attempted to try out CaNNoN Complete Eclair
-Didn't work correctly so I restored back to my most recent backup of SuperD v1.9.2
Once I restored, I found that all I had were the apps the SuperD includes built-in to his rom. Not one downloaded app was found on my phone. When I check in the market it still says all of them are installed, wont let me open them at all though. So of course I try to fix it myself and now my SD card just says Lost.Dir on it. Also now it goes through the T-Mobile G1 screen, begins the Super D boot image, and then goes black. I still have access to recovery, what happens now?
Mini update: Partitioned my SD again and now I get past the boot image, still no apps and I can't even reinstall them! Any help would be appreciated.
Mini update: Partitioned my SD again and now I get past the boot image, still no apps and I can't even reinstall them! Any help would be appreciated.
joe.kerwin said:
Mini update: Partitioned my SD again and now I get past the boot image, still no apps and I can't even reinstall them! Any help would be appreciated.
Click to expand...
Click to collapse
I cant remember exactly but I think theres something like repair ext or something like that, I think that is the thing to do when u cant install apps,
Dont take my word on it though , wait for someone more knowledgable to help i guess
I had the same problem as you but i've downgraded my phone and now my phone is urooted and the problem is still the same. when appears the android logo, the screen goes black. is there any soltion?
Any help for me?
thank you
jpjpr said:
I had the same problem as you but i've downgraded my phone and now my phone is urooted and the problem is still the same. when appears the android logo, the screen goes black. is there any soltion?
Any help for me?
thank you
Click to expand...
Click to collapse
joe.kerwin said:
Mini update: Partitioned my SD again and now I get past the boot image, still no apps and I can't even reinstall them! Any help would be appreciated.
Click to expand...
Click to collapse
both of you wipe data, dalvik, and sd: ext partition. repair ext partitions and reflash. you're not bricked if you can get past the t-mobile g1 screen or can get into recovery or bootloader.
Thank you r3s-rt, for giving me hope but honestly, i didn't understood what I need to do.
Thank you
I'm unrooted now and i can't pass the android logo, I can't get access to the operating system. How can I do the partitions, repair and reflash?
you can try to start over and get it to 1.6 again by following this sites guide
upgrade.android.32teeth.org
already done that, but with 2 updates. No success
jpjpr said:
already done that, but with 2 updates. No success
Click to expand...
Click to collapse
Buddy you need to first get a plain ( original ) 1.6 Rom as an update.zip on your sdcard boot into recovery , do a wipe THEN apply the update THEN reboot and wait , it will take a while to boot. DO NOT WIPE AFTER THE UPDATE is applied , you must let it *first boot* so it can rewrite the missing files..
where can I get that file? i've tried some but says no signature
I've already done that, nothing happens, the problem is still the same, I will try to flash HardSPL and see what happens
i was reading the topic of SPL and my phone is now unrooted, i can't do anything, i don't know what to do with my phone!
If you are un_rooted then you need to find a original un_rooted Rom , that was not signed with the test keys , ,if you are rooted you need to find a rooted Rom signed with the test keys , if you try to modify any of these roms before flashing them YOU NEED TO RE_SIGN THEM with the right keys , or you will get that no signature error ..
do you know where can I get that? Sorry about all the questions. Thank you
Everything that you need is in the link at the bottom of dan0zone's post right above you (#15). That is a walkthrough specifically geared toward G1's. The original image file for 1.5 is one of the first links he includes. He's even got the links for RC29 (US) as well as RC7 (UK)!
Remember! First boot takes FOREVER!!!! Let it sit for at least 5-10 minutes before doing anything.
Good luck!
I've already done that but nothing happens...what happens if I try to flash UK rom in USA phone? I don't know what should I try more.
is there any cupcake update or any way to don't need to slide the keyboard when ask for sign in or create a new google account? I can now access to the Operating system in Safe mode when I got almost bateryless but when i need to slide the keyboard to sign in my google account, the phone shutdown again. Any sugestion? I'm almost there.
Any help for me?
jpjpr said:
is there any cupcake update or any way to don't need to slide the keyboard when ask for sign in or create a new google account? I can now access to the Operating system in Safe mode when I got almost bateryless but when i need to slide the keyboard to sign in my google account, the phone shutdown again. Any sugestion? I'm almost there.
Any help for me?
Click to expand...
Click to collapse
sorry, man. i have a tendency to just disappear and forget where i posted. are you using cyanogens or amon_ras recovery? i suggest amon_ra's. select the "wipe" option. then choose the first three options that appear. then flash super d 1.9.2.
or just follow the rooting process all over again. if you can't get into recovery.
(recovery is accessed by holding the home key while powering the phone on.) if you need anything else, please pm me. i'll always respond to a pm, but very rarely to a post. sorry.
So i am a newbie on rooting and everything related.
and i rooted my phone got it on super cid and tried out a couple of custom roms to which ones i liked best for my liking.
The last custom rom i had was the hypernonsense 1.4
and when i was putting that on my phone. the guide told me to delete the file "android" afterwards. so.. i dont know if that has anything to do with it.
and i think i change the kernel or something on it too as it told me to do.
Everything was going good until i tried to put my phone in recovery from my backup on clockwordmod.
then it just stays on constant bootloop.
If someone can give me easy instructions on how to fix this problem. id greatly appreciate it.
You can try putting it into download mode, then flash a stock ROM. Otherwise you can look for a solution in the Sensation's forum.
hi guys i have a evo 3d gsm i rooted with revoulutionary worked great i have s/off i also have been running leeroid kernel with infected ethernety rom for he past month i have always used rom manager to load roms and always worked well so i tried to load a red theme without reading much on it and i ended up getting into a boot loop and i cant fix or flash any new roms to fix this problem because the clockworkmod recovery dosent respond it just goes to a black screen with a hat, i have tried to use fastboot to flash a new recovery but i guess im still new at this and im kinda stuck im like the only person i know up here in montreal that messes with androids so i could really use some detailed instructions on a soultion im not finding any threads with a real understanding of what i could do to fix this any help is would help thanks
Somebody please help
Can someone please giver some direction to at least reinstalling clockwork mod through fast boot please
did you make a back up of your rom before you flashed infected? flash your back up.
Yah I made a backup a few weeks back but Shari think I need to do is install a new recovery through fast lot but I'm not sure of how to do it some people say to use sdk it I don't know what I'm doing I'm kind of a noob at this stuff
who's Shari? anyways I would flash my back up and see if that resolves the issue but its up to you, I don't take any responsibility on what happens.
Sorry I don't know who Sharri is either lol miss spell but anyway that we're my issue is cuz I can't flash anything cuz clockwork mod recovery doesn't work every time I try to use the options it just goes to a black screen with a hat I can't even reboot I have to pull the battery to get out so I'm looking to do is flash a new recovery so I can try a restore of my backups but I'm not sure of how to do it
I was working fine, enjoying my new HTC One S with CM9 rom installed. Well the battery life wasnt the best on it, and i didnt install the custom kernel. So I looked for the custom kernel download(on my phone, not on my computer) and i found a .zip file. Well I thought that you could just download the kernel straight to my phone and open it up with "Rom Manager" which i did, it than said i needed to reboot the phone in recovery to continue the installation, so I did... it took me to recovery "to continue the installation" well than I looked away, looked backed down and it was black.... and i have tried powering up, booting into boot loader, booting into recover, and nothing... its just BLACK! nothing works, its literally useless ATM. I really messed up, is there anyway to fix this? Thanks in advanced!
----EDIT----
I think I accidentally flashed the kernel like i would normally flash a rom.... cause i downloaded the .zip file(directly to my phone, not using a computer), than i tapped the download and it asked me if i wanted to open it up with rom manager, so i did. and i think rom manager thought i was flashing a rom, when i wasnt, it was a kernel.... am i screwed? or is there anyway out of this?
Do you know the exact kernel you flashed--where did it come from
Some you need to extract and push
Assume you just tried to boot into bootloader thru phone buttons
Does your pc recognize your phone when plugged in, if so can you open a command window and try to access phone as in adb devices then adb reboot bootloader
assuming you are familiar with sdk adb/fastboot comands
otherwise i don't know what else to say--may be bad--sorry
Came from an XDA thread
Here is where it came from: http://forum.xda-developers.com/showthread.php?t=1708676 from "sun90" (half way down the page "CM9 KERNEL remix edition.zip - [Click for QR Code] (5.53 MB, 9 views) ")
i downloaded that straight to my phone and opened it up with Rom Manager, which i think the app took it as a rom, and installed it like a rom even though it was not a rom. I just tried to access it through adb, it comes up with no devices my PC does recognize it when i plug it in though...
Ive tried to get into bootloader tons of times, it just stays black... :'(
Thanks for your answer!
You flashed a galaxy s2 kernel on your one s? why would you ever think that was a smart thing to do?
Looking at the updater script in that zip it seems it wipes some partitions, the partitions on a SGS2 and the ONE S are different, so if that script accidentally wiped say the hboot partition, or some other critical-for-boot partition, you have a fully bricked phone.
For any devs that may know what partitions are what on the One S, the script wiped
mmcblk0p7, and wrote a zimage to mmcblk0p5
---EDIT---
Normally this is a cwm flashable zip on the Samsung Galaxy S II, which is why rom manager flashed it, as it met all the requirements, the only issue is, it was not made for the ONE S and probably overwrote some important things.
I tried for hours and hours to fix the same issue on a friend's One S (same symptoms, not same cause) to no avail. I tried QPST and telnet and a ridiculous amount of things. Had to bring it to the store and get a new one.
Good luck, but I don't believe there's anything you can do to fix it.
Just answered your question in the help thread, Didnt see this thread too !
Im afraid its not looking good, I think your best bet would be to call your provider and blame it on an OTA update.
And hope for the best
Alright, thanks for the help!
Well it looks like i bricked my phone than.... I thought that CM9 was only on the One S, so I just looked for the CM9 kernel, which obviously was for the sg2, i feel like such a dumb ass now! haha well thanks for all the help guys! ill be heading to the t-mobile store today to blame it on a OTA:]
yeah, others wont agree with what your about to do but........
just act like a complete noob, dont mention anything about software / firmware / ROMs / bootloader etc ect
just say your phone made a noise, you selected update and it died lol
good luck--I know it is heartbreaking
not sure of your situation with carrier, but you could go thru Retention if needed
Hi peeps.
i'm very new to all this but sort of know the basics
i'm running on Axiom now but tried to flash cm10 but after install i got a black screen so had to do a restore.
Today i just flashed venom and after the instal process is done, i hear the start up music but nothing on the screen.
I have had 3 other roms on my phone and never had a problem!
these are the steps i do
download rom - place on sd
put phone in recovery
reset factory
reset cache
install from sd
when it finish's reboot
blank screen.
Am i missing something?
Any help would be great and i can't post on the thread because i'm a noob with less than 10 and dont want to spam my way to the 10 :silly:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
rugmankc said:
you are missing a lot, like reading the OP page and following install instructions
you missed separate flash of boot image and wiping system plus data and caches
i wipe system 3x to be safe
Click to expand...
Click to collapse
Thanks but i think that is now the least of my problems!
I used Goomanager and installed CM10, When I did it i installed teamwin recovery. It started to do a lot of strange things, when it finally rebooted i got a load of errors "phone is not working" nearly every 10 seconds?
it will not connect via usb, i discovered the the SD was not mounted.
I tried to mount the SD but it doesnt work, so i rebooted to recovery and tried to mount there but its coming up with - error unable to mount? ive tried everything but no joy
please please help
Thanks:crying:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
rugmankc said:
see if this is your situation
http://forum.xda-developers.com/showthread.php?t=1630459
can you connect phone to pc and use fastboot commands
Click to expand...
Click to collapse
I've got a mac
not sure what fastboot is.
I'll check out the link, and thank you very much for trying to help:good:
sorry i do know what fastboot is, yes can get in to it. but ive gone from CWM to teamwin recovery if i go in to the recovery section but that wont let me do anything because the mount. cant even load the phone up
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
rugmankc said:
I don't know Mac commands
My idea is to install htc drivers and set up fastboot/adb on pc--the info can be found in dev section on rooting
then open a command window and and boot into fastboot and flash a new recovery, maybe stock per the link, clear storage and try to get mounted
how did you unlock bootloader--
you will need to do alot of reading on adb/fastboot and flashing roms--first step is to have backups of rom and sdcard
since i don't the Mac commands to do fastboot, someone else will chime in at some point
you can alos go to the noob section in Q&A and resubmit your issue
someone will work you thru this, but in meantime study up on android sdk/fastboot/adb. a necessity to get out of these problems
you are not bricked, just need the info and right steps to get back on track
Click to expand...
Click to collapse
im going to use someone elses alp top with windows. i'll ytry the all in one thing because thats how i rooted it in the first place. thanks for helping it means alot
good luck on it
My Atrix 2 is currently having some serious issues. Last night I rooted it. I changed the boot animation to what was supposed to be a human eye turned droid eye or something. When I rooted it and attempted to install Safestrap it didn't install correctly. As I am inexperienced with rooting android phones, I didn't think it'd hurt. I don't know if it did. When I rebooted to see the animation it just said android in silver letters with light flashing across it and it never got past that. I did several hard resets to see if that would fix it, after trying multiple battery pulls of course, and nothing. The phone is now dead and won't charge, when I plug it in it just shows the Motorola logo and doesn't do anything, but if I unplug it the logo doesn't go away. Help, please!
CreativeSin said:
My Atrix 2 is currently having some serious issues. Last night I rooted it. I changed the boot animation to what was supposed to be a human eye turned droid eye or something. When I rooted it and attempted to install Safestrap it didn't install correctly. As I am inexperienced with rooting android phones, I didn't think it'd hurt. I don't know if it did. When I rebooted to see the animation it just said android in silver letters with light flashing across it and it never got past that. I did several hard resets to see if that would fix it, after trying multiple battery pulls of course, and nothing. The phone is now dead and won't charge, when I plug it in it just shows the Motorola logo and doesn't do anything, but if I unplug it the logo doesn't go away. Help, please!
Click to expand...
Click to collapse
Phew, that was close. Hello and welcome to the help section of the A2 forum, for starters the trouble you're facing right now is called soft bricking. It's a very common problem, but is usually solved by flashing the correct ICS sbf for your region.
So firstly, is your phone branded AT&T or is it from another region? Please specify which. Next you need to recharge your battery externally either by an external battery charger or the Mcgyver method. (search the forum for more details).
After you've charged your battery up enough, put it back in your phone and put your phone into fastboot mode by holding the volume down button + power button and make sure it says 'Battery OK'.
After making it this far, you'll need RSD lite order to flash/install the sbf files. If everything goes fine without failure, then your phone will be back to stock and you've saved it! Here's a thread that has content that should guide you with further details: http://forum.xda-developers.com/showthread.php?t=2245825 Good luck!
Sent from the Ace's MB865 using xda-developers app
Aceofzeroz said:
Phew, that was close. Hello and welcome to the help section of the A2 forum, for starters the trouble you're facing right now is called soft bricking. It's a very common problem, but is usually solved by flashing the correct ICS sbf for your region.
So firstly, is your phone branded AT&T or is it from another region? Please specify which. Next you need to recharge your battery externally either by an external battery charger or the Mcgyver method. (search the forum for more details).
After you've charged your battery up enough, put it back in your phone and put your phone into fastboot mode by holding the volume down button + power button and make sure it says 'Battery OK'.
After making it this far, you'll need RSD lite order to flash/install the sbf files. If everything goes fine without failure, then your phone will be back to stock and you've saved it! Here's a thread that has content that should guide you with further details: http://forum.xda-developers.com/showthread.php?t=2245825 Good luck!
Sent from the Ace's MB865 using xda-developers app
Click to expand...
Click to collapse
As RSDLite was rebooting my phone I checked the forums and saw this! Hahah but thank you very much! This is pretty much exactly what I ended up doing. I posted this and then read up on the forums rules and some stuff and realized I should really learn to help myself if I want to . Took some time and a lot of mistakes but I put it together. Thank you very much for the reply.
CreativeSin said:
As RSDLite was rebooting my phone I checked the forums and saw this! Hahah but thank you very much! This is pretty much exactly what I ended up doing. I posted this and then read up on the forums rules and some stuff and realized I should really learn to help myself if I want to .
Took some time and a lot of mistakes but I put it together. Thank you very much for the reply.
Click to expand...
Click to collapse
You're welcome :thumbup: I'm glad it all worked out for you in the end. I still remember the time earlier this year when I just got my phone, went crazy with mods and ended up softbricking it for a whole week. It was hell just to get it working again cuz RSD Lite decided to hate me from the get-go. -_-
So I'm glad to help others out with this, but enough rambling lol, take greater care for the next flashes you do until you get used to it!
Sent from the Ace's MB865 using xda-developers app
Aceofzeroz said:
You're welcome :thumbup: I'm glad it all worked out for you in the end. I still remember the time earlier this year when I just got my phone, went crazy with mods and ended up softbricking it for a whole week. It was hell just to get it working again cuz RSD Lite decided to hate me from the get-go. -_-
So I'm glad to help others out with this, but enough rambling lol, take greater care for the next flashes you do until you get used to it!
Sent from the Ace's MB865 using xda-developers app
Click to expand...
Click to collapse
Thanks! Just got it all rooted again no problem. I'm trying to learn all this, any tips on something I could start working on?
CreativeSin said:
Thanks! Just got it all rooted again no problem. I'm trying to learn all this, any tips on something I could start working on?
Click to expand...
Click to collapse
Well now that you're back and rooted, if you're planning on doing any more flashing any time soon then I recommend you install boot menu manager. If you've previously installed safestrap or bootstrap, clear their data and uninstall them before installing bmm.
With that done, you've just made your phone a little safer from bricking because bmm allows multi rom booting, which are somewhat independent of the primary system. Refer to this thread for more info on how to make systems, etc.: http://forum.xda-developers.com/showthread.php?t=2115715
The first thing you'd want to do is make sure your apps/data is always backed up at all times with apps like titanium backup. Create 2 or more systems so that you can try the bmm compatible custom ROMs which are in the dev section if you want to try any of them. But please, read all instructions, warnings, requirements, etc. carefully before attempting any flashing in general.
The thread I posted in my earlier post above will have links to the specific custom ROMs. If you're doing any other kind of flashing, make sure to again, read instructions carefully and take your time with learning all of this.
Hi, I soft bricked my phone recently.
I was running stock ICS from Moto on a rooted Atrix 2. I wanted to upgrade it to JB so I installed Atrix 2 bootstrap and clicked Bootstrap Recovery (gave superuser permission) and then Reboot Recovery. It went into CWM and I wiped factory data and cache. Before I installed the JB zip I backed up my old ICS via CWM and then installed CyanogenMod-Dev-edison-nightly-20130401-2132-signed.591fan.com zip.
It was upgraded successfully to 4.2.2 but I couldnt get my updated contacts from the Super Recovery app, so I thought to restore the old ICS and backup the contacts once again. I installed Atrix 2 bootstarp apk again and went thought the same process ( Bootstrap recovery > gave Superuser permission > Reboot recovery). As soon as it rebooted the Motorola logo came on and after that the phone gave dark grey screen. I tried rebooting and going into CWM on startup but it didnt give the option of install zip from sd card as it did on my earlier attempt.
I am stuck with a bricked phone and all my work is stuck up.
I read about RSDlite but I have heard it causes hard bricking on several occasion. So, I am a bit cautious about using it and I dont know the exact procedure to use it also. Can you please guide me on how to regain my phone from this soft brick and where i went wrong during my installations.
Any help would be very much appreciated. Thanks a lot in advance.
kunal2711 said:
Hi, I soft bricked my phone recently.
I was running stock ICS from Moto on a rooted Atrix 2. I wanted to upgrade it to JB so I installed Atrix 2 bootstrap and clicked Bootstrap Recovery (gave superuser permission) and then Reboot Recovery. It went into CWM and I wiped factory data and cache. Before I installed the JB zip I backed up my old ICS via CWM and then installed CyanogenMod-Dev-edison-nightly-20130401-2132-signed.591fan.com zip.
It was upgraded successfully to 4.2.2 but I couldnt get my updated contacts from the Super Recovery app, so I thought to restore the old ICS and backup the contacts once again. I installed Atrix 2 bootstarp apk again and went thought the same process ( Bootstrap recovery > gave Superuser permission > Reboot recovery). As soon as it rebooted the Motorola logo came on and after that the phone gave dark grey screen. I tried rebooting and going into CWM on startup but it didnt give the option of install zip from sd card as it did on my earlier attempt.
I am stuck with a bricked phone and all my work is stuck up.
I read about RSDlite but I have heard it causes hard bricking on several occasion. So, I am a bit cautious about using it and I dont know the exact procedure to use it also. Can you please guide me on how to regain my phone from this soft brick and where i went wrong during my installations.
Any help would be very much appreciated. Thanks a lot in advance.
Click to expand...
Click to collapse
Use boot menu manager instead of bootstrap recovery
Sent from my MB865 using XDA Premium 4 mobile app