new x10 user, PLEASE HELP. =,( - XPERIA X10 Themes and Apps

i just bought an x10 phone and wanted to know how to install applications and themes... PLEASE HELP ME...

OK,
for apps:
From the market it should be pretty obvious, so I'm assuming you mean from an apk on your SD card.
You'll need a file explorer like Estrong (from the market) or RootExplorer (only works with 'root' (see below)).
You also need to allow 'applications from unknown sources' (Settings -> Applications)
Then just browse to the apk in the file explorer and selecting it should prompt the installation. After that you're good to go.
Themes:
this is a bit trickier (is that a word).
1. First up, you'll need root (kind of like admin rights on windows). The easiest way is to use the one-click root app from the development section, this installs as above and then on launching there's a 'Root' and an 'Unroot' button. Click root and you're done.
2. What you're doing when you install a theme is replacing the apk files for the phones framework and certain key apps. The modified versions that are copied mostly just contain updated resources (almost always .png files).
This is the reason you need root, you are replaced protected system files. It is also the reason that you can only have one theme at a time and can't 'hot-swap' them like in timescape, for example.
The best way to go about this, in my opinion, is to download one of chewitts themes. Before you install it take a look at the installer bat - open it in Notepad - sorry I'm just assuming everyone uses windows , probably get shot for those sort of assumptions here
It is my firm belief that, if you don't understand what is going on in that installer file then you need to do some more research, start with the stickies here (maybe the one about how to use chewitts installer) and check this thread out as well:
http://forum.xda-developers.com/showthread.php?t=714288&highlight=modify
Hope this is enough to get you started. Let me know if something isn't clear.

Related

[Q] apk installer zip file to bootstrap app re-installs

Hi all.
I play with quite a few different roms, and currently add a little program apkinstaller to the rom before I load it.
I use the apkinstaller to first re-install TB off the SD card, and then I use TB to re-install everything else, then I go setup my accounts for market and syncing (don't need the cloud servers to do the re-installs wasting bandwidth).
It would be even better if I could put this apkinstaller and TB into a zip file which I could install after loading the rom.
If I can get it to load from a zip file, then I wouldn't even need the apk installer; I would just install TB from the zip file, reboot, and reload from there.
Where can I find information about what I need to do in a zip file to install an apk?
Thanks all.
Yeah I have the same question. Any one have any suggestions?
no-one able to assist
Seems there isn't much interest in replying - I assume this rather than no-one actually knowing.
I need my post count up anyway so I might as well reply with what I have seen. There was a thread somewhere else that I saw someone had a fresh_install.zip script to delete a set of files, and add launcher pro. I guess I need to pull that apart and see what I can work out from it. I only want to do the single file add, so it hopefully will be simple.
easier solution already available
Adding to my own thread again in case anyone else is interested.
I have been looking at the file, and have information about what would need to be done, but now find an easier alternative. It seems that many (most?) of the file managers have an apk installer built in. The roms typically come with a file manager, so I can just use that to start off my re-install process- nothing else required.
Will probably still play with the .zip file though just to understand what it needs.

[Q] makign an app to put a specific file in a specific folder

if this is in the wrong place mods i am sorry so feel free to move to the right place at your discretion as i am not sure where this question would go.
is there an easy to understand way to make an app that would install 1 specific file to a specific folder on the system (/data/local). im no coder so i have no idea how to do this but i want to make an app that is simple and basic so that when a user opens the app it's only function is to install a certain file into the /data/local folder
Couldn't you just use Root Explorer to do this? I would think there would be a way to do this with Tasker, but I'm not really familiar with the app. I tried out the trial (available on the Tasker website) and learned a little about how to work it, but ultimately realized that there wasn't much that I'd use it for.
I'm sure if you gave your intentions - what file for what reasons, etc - you'd be more likely to get a solution.
Sent from my PC36100 using Tapatalk
i use root explorer for my own phones but i create custom boot animations and i am lookign for a way to make an App that would include (X) bootanimation, and upon downloading/installing it he app would automaticly install the bootanimation.zip file that its bundled with into the users /data/local folder, as some people dont have the tools or abilitys/familierty with the there phone to move the bootanimation to where it needs to be to actually work.

[Q] Is copying an .apk into /{system, data}/app sufficient to install an Android app?

If not, what else is done under the covers?
Also, what are the differences when installing applications
•From the android market
•sideloaded from web download
•sideloaded using adb install
•sideloaded using adb push
I copied this question from another place (I cannot put link here because I am new here) because I also have the same question and want to know more about this.
oldyoungguy said:
If not, what else is done under the covers?
Also, what are the differences when installing applications
•From the android market
•sideloaded from web download
•sideloaded using adb install
•sideloaded using adb push
I copied this question from another place (I cannot put link here because I am new here) because I also have the same question and want to know more about this.
Click to expand...
Click to collapse
Some .Apk's can be placed in system/data/app while others can't , make sure the .apk you're trying to place in system/data/app is supported or you may end up restoring your device. if the apk can run from the system /data/app then yes with the right permissions ...
Apk's from the market will give you detailed info from the apk like permission needed , supported devices ect, even the developers contact info ( in other word they are approved by Google.
while "sideloaded" apk or web apk (not coming from Google) are pirates apk,modified apk ect. who knows what permissions it needs or what info you are sharing with whoever modified the apk...
So be careful what you get into your device and where is placed on your device
Sent from my SPH-M930BST using Tapatalk 2
oldyoungguy said:
If not, what else is done under the covers?
Also, what are the differences when installing applications
•From the android market
•sideloaded from web download
•sideloaded using adb install
•sideloaded using adb push
I copied this question from another place (I cannot put link here because I am new here) because I also have the same question and want to know more about this.
Click to expand...
Click to collapse
Simply placing the apk into the correct folder is not enough. You will also need to set the permissions to the same as the other apps in that folder (I can't remember the permissions off the top of my head). This can easily be done using Root explorer, or using an adb shell and the chmod command.
Play Store installs and sideloaded installs achieve the same result, however you will want to be careful where you download apk files from. Apps from the Play Store are less likely to be malicious in nature, and , of course, you should never be pirating paid apps.
Adb push would not be enough as you would still need to set permissions. Unless you are installing a system app, it is better just to use adb install.
rootedVette said:
Adb push would not be enough as you would still need to set permissions. Unless you are installing a system app, it is better just to use adb install.
Click to expand...
Click to collapse
Are you saying the "adb push" will only copy file into the target location but "adb install" will copy the file into the target location AND also set the proper permission for you?
With all of the usual warnings about the source/safety of "side-loaded" apps aside. . .
I simply put the .apk file onto the SD card (anywhere), and then use a file manager like Astro to "open" it (root access not required). You will be prompted to see if you really wanted to install the app. Then let Android do its thing. The app will be installed where it belongs, with all the permissions it needs.
For this to work, you must first tell the device to allow installation of apps from unknown sources. Go to Settings | Security, and check Unknown Sources.

[solved] crashing accessibility app

To the Admins, I'm not entirely sure where you guys would want this thread...troubleshooting seemed to be the most sensible.
all right everyone, I'll explain here how I fixed this, but keep in mind I have the ATT LG G2 running KitKat with TWRP 2.7.0.0 and I'm rooted. I only recommend this for advanced users. If you aren't an advanced user, well, make sure you have a backup. I'm sure there was a faster way to fix this, but my goal wasn't to find the fastest way initially, it was to find a working way. For example, you could just ADB everything. You could also, assuming you know how to use your OS to search that deep into the device files, done a rename, copy/paste etc. etc. Not all devices are made equal, so be CAREFUL! BTW, I was in debugging mode + charge only.
WARNING: I AM ONLY OFFERING THIS FOR INSIGHT TO ADVANCED USERS THAT KNOW WHAT THEY ARE DOING - I DON'T OFFICIALLY RECOMMEND THAT ANYONE DO THIS. I AM NOT RESPONSIBLE FOR ANY TRANSMUTATION FROM LG G2 TO BRICK.
Here's what I did:
1) I opened accessibility while hooked up to the debugger in Android Studio to see that it was producing a Null Pointer Exception.
2) I have a slightly modified version of the TOT file so that I can run TWRP and still be rooted in KitKat.
3) I am rooted, so I used Root Explorer to search for accessibility and found that the file is called "LGSettingsAccessibility.apk" and .odex - it's under (WITH ROOT ONLY) /system/priv-app/
4) I searched for a system dump copy online...I found this site: http://hunterspad.com/Domains/StorageCow/Xda/Users/garyd9/Extracted System/priv-app/
I found that by typing "LGSettingsAccessibility.apk" and initially found a Google Drive version but it was posted in September of 2013 - unlikely to be the odex and apk from KitKat hahaha. I used a Google Search that searched custom range between Feb 1st and today. I found 2 links, one of which is the above.
NOTE: I don't recommend anyone do the following unless you KNOW what you are doing and definitely have a backup to restore to if things go wrong
5) I sent the link for each file to myself on Google Hangouts. I used Hangouts to download the March 14th upload of the LGAccessibilitySettings.apk and LGAcessibility.odex
5.5) I copied each of the original files (.apk and .odex) from /system/priv-app/ to my /sdcard/LGBackup folder I created using the Root Explorer app.
6) I went into the app "Root Explorer" again after downloading both files (DID NOT INSTALL IT, though it probably won't let you anyway). I checked both files and copied them.
7) I went back to /system/priv-app/ and renamed the existing files to be replaced with the extension ".bak" so that the system no longer points to those files (NOTE: Root Explorer asked me to remount as R/W (read and write vs. read-only) a good feature of root explorer to be in read-only by default; dangerous territory.
8) Bottom right corner of Root Explorer it was waiting for me to "Copy Here" when arriving at the location where I wanted to copy the files: /system/priv-app/ and after copying them I decided to be a fool and install the apk and it told me something like "app not found" or something.
9) FINALLY went into Settings and touched Accessibility and VOILA! It worked! A lot of luck involved - the odexed and apk files may not have been the proper version. I could have checked with relative ease (though likely time-consuming) by using some of my android dev skills/utilities.
WARNING: I AM ONLY RECOMMENDING THIS FOR ADVANCED USERS THAT KNOW WHAT THEY ARE DOING.
Thanks to garyd9 on XDA - without your uploaded files on storage cow, I couldn't have fixed this problem!

Hyperkin Smartboy ROM copying

First off, I am new to the forum, so if I'm breaking the rules (which I have read, and believe I am following correctly) or if this post would fit better in a different section, please let me know!
So I have the Hyperkin Smartboy USB-C version, and I was wondering if anyone knows of a way to download ROMs off of it? I have a few GB/GBC games that I would like to be able to play in times where I don't have the Smartboy and cartridge with me (NOT in order to file share, in fact I want to do this to avoid downloading the ROMs online). For those who don't know, it will temporarily place the ROM on your device and allow you to open it in an emulator. I attempted to load the ROM, open a file explorer, and copy the ROM from there, but the file wasn't there. My guess is that the Smartboy simply removes the ROM from the device unless either the Smartboy app or the emulator app is running.
Again, if this post is against the rules (as it could be considered pirating) please let me know and I will remove it. Thanks in advance for any info!
I figured it out!
Immediate after posting I messed around with it for about half an hour and figured it out, so here's how I did it if anyone is interested:
TOOLS/SOFTWARE NEEDED:
Hyperkin Smartboy
A file explorer app with the "archive" option located on the top half of the screen (I used File Explorer Root Browser by JRummy Apps)
The GB/GBC cartridge you would like to copy to your device
HOW TO:
Place the file explorer app at the top of your homescreen for easy access. Open the app and navigate to /storage/emulated/0
Plug your phone into the Smartboy and load the cartridge data
Hit "Run Launch Software". This will open the emulator
Go back to the homescreen and open the file explorer
Open the HyperkinSmartboySerial folder and archive smartboy.gb (place it in a ZIP folder)
Move the folder to your desired location and unzip it
And that's it! I hope this thread helps anyone who's been wondering how/struggling to do this. Enjoy
Disclaimer: Pirating is bad, mkay. Please don't download/share ROMs that you do not personally own a copy of.
Thanks for the info im going to try it.

Categories

Resources