Database Info

[Q] Change Modelnumber from Z710e to Z715e

I am looking for a solution to change the modelnumber in the phone info menu.
now it says "HTC Sentation Z710e" I want to change it to "HTC Sentation XE with Beats Audio Z715e"
I have tried to change it in the build.prop in the system folder but no luck yet.
did manged to change the processor type from 1.2 to 1.5
just to be clear.
I know it's only for info, the phone will not preform better.

Just install an XE rom.
Sent as a ballistic missile.

wat u need to do is
go to system/custmomize/CID
open default.xml
almost all the way down
<set name="single">
<item name="device_name">HTC Sensation Z710e</item>
</set>
Change to
<set name="single">
<item name="device_name">HTC Sentation XE with Beats Audio Z715e</item>
</set>

janielsen said:
wat u need to do is
go to system/custmomize/CID
open default.xml
almost all the way down
<set name="single">
<item name="device_name">HTC Sensation Z710e</item>
</set>
Change to
<set name="single">
<item name="device_name">HTC Sentation XE with Beats Audio Z715e</item>
</set>
Click to expand...
Click to collapse
I did tried this but also no luck, also find a default.xml in the folder system/custmomize/MNS
don't seem to work also.
but any way thanks for the quick response

found the problem u need to edit thoose files in systen/custemice/mns
an build.prop before instaling the rom

janielsen said:
found the problem u need to edit thoose files in systen/custemice/mns
an build.prop before instaling the rom
Click to expand...
Click to collapse
I did tried it, but no luck
I will do a super wipe en then flash the modified Rom again.
keep you posted if this will work.
Just did a super wipe and flash the modified rom again en now I am a happy camper
IT's WORKING
thanks janielsen

[MOD][GUIDE] Remove Ongoing Notification

This is a quick way to remove the aggrivating Ongoing WiFi notification in the drop down menu. There may be other ways to do it via smali or xml but I have not found them yet so this will work for now.
I am including a flashable ZIP as well but it "may" cause issues if your on a custom ROM.
The Guide....
Decompile framework-res.apk
First verify these lines are not already there, if not, add the following code to res/values/drawables
Code:
<item type="drawable" name="stat_sys_wifi_connected">false</item>
<item type="drawable" name="stat_sys_wifi_disabled">false</item>
<item type="drawable" name="stat_sys_wifi_dummy">false</item>
<item type="drawable" name="stat_sys_wifi_no_network">false</item>
<item type="drawable" name="stat_sys_wifi_not_connected">false</item>
Remove the following .pngs from res/drawables-hdpi and drawables-xhdpi
Code:
stat_sys_wifi_connected.png
stat_sys_wifi_disabled.png
stat_sys_wifi_dummy.png
stat_sys_wifi_no_network.png
stat_sys_wifi_not_connected.png
Recompile and push to /system/framework
This is meant for a stock deodexed BLK3 Rom. Nandroid First!
Ongoing Removal Zip Download

Not working on CleanROM 5.5.1
I know it says stock K3, but CR is stock based..
Sent from my Commodore 64..
READY.
load"*", 8,1

Hypnosis4U2NV said:
Not working on CleanROM 5.5.1
I know it says stock K3, but CR is stock based..
Sent from my Commodore 64..
READY.
load"*", 8,1
Click to expand...
Click to collapse
Can you be more specific? Did it bootloop, get stuck on splash, or just not remove the ongoing notifications?
This is just a framework-res mod, so it should be fairly compatible with most roms, but if the rom your on has made changes to framework-res you may have complications.
I tested it on my stock BLK3 rom and it worked fine.

Hypnosis4U2NV said:
Not working on CleanROM 5.5.1
I know it says stock K3, but CR is stock based..
Sent from my Commodore 64..
READY.
load"*", 8,1
Click to expand...
Click to collapse
Lol its already removed from CleanROM. This is how I have been removing it from all the jellybean leaks. I did this mod for the last few cleanroms and is released in the roms from scott
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 05:02 PM ---------- Previous post was at 04:56 PM ----------
Didact74 said:
This is a quick way to remove the aggrivating Ongoing WiFi notification in the drop down menu. There may be other ways to do it via smali or xml but I have not found them yet so this will work for now.
I am including a flashable ZIP as well but it "may" cause issues if your on a custom ROM.
The Guide....
Decompile framework-res.apk
First verify these lines are not already there, if not, add the following code to res/values/drawables
Code:
<item type="drawable" name="stat_sys_wifi_connected">false</item>
<item type="drawable" name="stat_sys_wifi_disabled">false</item>
<item type="drawable" name="stat_sys_wifi_dummy">false</item>
<item type="drawable" name="stat_sys_wifi_no_network">false</item>
<item type="drawable" name="stat_sys_wifi_not_connected">false</item>
Remove the following .pngs from res/drawables-hdpi and drawables-xhdpi
Code:
stat_sys_wifi_connected.png
stat_sys_wifi_disabled.png
stat_sys_wifi_dummy.png
stat_sys_wifi_no_network.png
stat_sys_wifi_not_connected.png
Recompile and push to /system/framework
This is meant for a stock deodexed BLK3 Rom. Nandroid First!
Ongoing Removal Zip Download
Click to expand...
Click to collapse
Just a fyi you don't have to add those lines in the xml. You can just 7 zip open the framework and delete the 5 pngs from the drawable/hdpi folder this how I've done all the jellybean leaks for everyone and causes no issues and you don't have to recompile so it's a little quicker.
Sent from my SCH-I535 using xda app-developers app

This worked great for me on stock odex even. Framework-res is not an odexed file, so it should work on any "stock" unmodified framework. If used on a modded framework as the op says it will break those mods.
Sent from my SCH-I535 using Tapatalk 2

I apologize, it was the setting in wifi to disable it.. Sorry for the confusion..
Sent from my Commodore 64..
READY.
load"*", 8,1

rwc95 said:
Just a fyi you don't have to add those lines in the xml. You can just 7 zip open the framework and delete the 5 pngs from the drawable/hdpi folder this how I've done all the jellybean leaks for everyone and causes no issues and you don't have to recompile so it's a little quicker.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks Man!

The way I did it was go into the WiFi settings then hit menu and then advanced. Then I proceeded to uncheck and turn off everything that would turn the WiFi back on. I'm running Jelly Bean's build 6. Hope this helps for someone that doesn't feel confident flashing or messing with decompiling.
Sent from my SCH-I535 using xda premium

john21511 said:
The way I did it was go into the WiFi settings then hit menu and then advanced. Then I proceeded to uncheck and turn off everything that would turn the WiFi back on. I'm running Jelly Bean's build 6. Hope this helps for someone that doesn't feel confident flashing or messing with decompiling.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I think everyone is confusing the ongoing wifi in pulldown with the pop up Window that scans for networks. This mod is to remove the ongoing wifi stuff that stays in the pulldown that can not be turned off unless already removed from the rom your running. The pop up Window can be disabled on any rom by going to the wifi settings and un checking notify me at the top. Hope this halfway clarifies.
Sent from my SCH-I535 using xda app-developers app

Got bored and decided to flash this on my stock rooted k3 and it worked perfect but for some reason gave me a nav bar haha its cool tho I have a nandroid
Sent from my SCH-I535 using Tapatalk 2

rwc95 said:
Just a fyi you don't have to add those lines in the xml. You can just 7 zip open the framework and delete the 5 pngs from the drawable/hdpi folder this how I've done all the jellybean leaks for everyone and causes no issues and you don't have to recompile so it's a little quicker.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I used this method. Thanks a ton for that and thanks to the OP.
Sent from my SCH-I535 using xda premium

rwc95 said:
Lol its already removed from CleanROM. This is how I have been removing it from all the jellybean leaks. I did this mod for the last few cleanroms and is released in the roms from scott
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 05:02 PM ---------- Previous post was at 04:56 PM ----------
Just a fyi you don't have to add those lines in the xml. You can just 7 zip open the framework and delete the 5 pngs from the drawable/hdpi folder this how I've done all the jellybean leaks for everyone and causes no issues and you don't have to recompile so it's a little quicker.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
+1 on just removing/renaming the png files. Works like a charm without any side effects that I've noticed.

Does anyone have the original stock framework-res.apk for jelly bean? Flashed this zip and everything was fine, but one of the only games I play does not work anymore. Thanks!

NM, just did a nandroid restore.

will try with deodexed 4.2 OTA and pos results

To anyone wondering it doesn't work with 4.1.2 VRBMB1 official stock rooted, you will get boot loops. Thank you for making this anyways though does anyone know any ways to remove the ongoing notification in VRBMB1?

joshua5683 said:
To anyone wondering it doesn't work with 4.1.2 VRBMB1 official stock rooted, you will get boot loops. Thank you for making this anyways though does anyone know any ways to remove the ongoing notification in VRBMB1?
Click to expand...
Click to collapse
I was able to rename the .png files on VRBMB1 without a problem. I adb pulled framework-res.apk, opened in 7-zip, deleted the 5 .png files, and copied the .apk back to /system/app/framework
Works just fine. Perhaps it's best to avoid decompiling/recompiling the framework. Using 7-zip is just fine.

dunderball said:
I was able to rename the .png files on VRBMB1 without a problem. I adb pulled framework-res.apk, opened in 7-zip, deleted the 5 .png files, and copied the .apk back to /system/app/framework
Works just fine. Perhaps it's best to avoid decompiling/recompiling the framework. Using 7-zip is just fine.
Click to expand...
Click to collapse
Guys, the way i do it is just like the tutorial in the first post. Remove the PNG's and add the lines to drawable. The reason you add the lines to drawable is to retain the IDs in res/public. If you remove the PNGs then try to recompile you will get errors because there are still IDs in res/public that point to the now removed PNGs. If you try to remove the IDs from res/public then it will throw your hexidecimal ID order out of whack and will cause recompiling errors. Like the tutorial shows in the first post, by adding these lines to res/drawable
Code:
<item type="drawable" name="stat_sys_wifi_connected">false</item>
<item type="drawable" name="stat_sys_wifi_disabled">false</item>
<item type="drawable" name="stat_sys_wifi_dummy">false</item>
<item type="drawable" name="stat_sys_wifi_no_network">false</item>
<item type="drawable" name="stat_sys_wifi_not_connected">false</item>
you still retain the IDs in res/public but they no longer point to the PNGs you removed, they now point to the dummy's you added to res/drawable.
If you want to just open the APK with winzip or whatever and remove the PNGs thats fine too, however, if you go to make other changes that would require you to decompile/recompile you will get errors.

Didact74 said:
Guys, the way i do it is just like the tutorial in the first post. Remove the PNG's and add the lines to drawable. The reason you add the lines to drawable is to retain the IDs in res/public. If you remove the PNGs then try to recompile you will get errors because there are still IDs in res/public that point to the now removed PNGs. If you try to remove the IDs from res/public then it will throw your hexidecimal ID order out of whack and will cause recompiling errors. Like the tutorial shows in the first post, by adding these lines to res/drawable
Code:
<item type="drawable" name="stat_sys_wifi_connected">false</item>
<item type="drawable" name="stat_sys_wifi_disabled">false</item>
<item type="drawable" name="stat_sys_wifi_dummy">false</item>
<item type="drawable" name="stat_sys_wifi_no_network">false</item>
<item type="drawable" name="stat_sys_wifi_not_connected">false</item>
you still retain the IDs in res/public but they no longer point to the PNGs you removed, they now point to the dummy's you added to res/drawable.
If you want to just open the APK with winzip or whatever and remove the PNGs thats fine too, however, if you go to make other changes that would require you to decompile/recompile you will get errors.
Click to expand...
Click to collapse
No PC here is there a way to do this on the phone
Sent from my SCH-I535

hitman980206 said:
No PC here is there a way to do this on the phone
Sent from my SCH-I535
Click to expand...
Click to collapse
I'm pretty certain you can remove the .png files using NinjaMorph.

[MOD][HOW TO][GT-S7562] Enabling/modding Transparency

Hi Samsung Galaxy S Duos GT-S7562 users
Many of you asked me questions/helps for regarding transparency in our device.
So, i decided to make a help thread for everyone for GT-S7562 [This is what i did to make transparency in my GT-S7562 ]
This guide will tell you to how to enable transparency and modding transparency levels in your device.
You will need:
1. 7zip
2. Notepad++
3. ApkToolv3 Donwload here (Not any other ApkTool) [For this ApkTool, Credit goes to Kryten2k35]
Now the steps:
1. Extract apktoolv3
2 There will be a 'READ_ME.txt file, with the help of this decompile your SystemUI.apk
3. Now open WORKING folder and go to- SystemUI\smali\com\android\systemui\statusbar
4. Open StatusBar.smali with notepad++ and search for this:
Code:
Landroid/view/WindowManager$LayoutParams;->(IIIII)V
Go to the line above it and change the last value to -0x3
Save it and close
This will enable the transparency for StatusBar
Now for StatusBar Expanded/Notification Background
1. Go to- SystemUI\smali\com\android\systemui\statusbar\phone
2. Open PhoneStatusBar.smali with notepad++ and search for this:
Code:
const v4, 0x4800068
replace the 2 lines underneath with this:
Code:
const/4 v5, -0x3
move v2, v1
Now search for this:
Code:
Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mPixelFormat:I
Go to the line above it and change the last value to -0x3
Save it and close.
This will enable transparency in your device
Now for making transparency
1. In WORKING folder go to- SystemUI\res\values
2. Open drawables.xml using notepad++ and in this line:
Code:
<item type="drawable" name="status_bar_background">#[COLOR="Red"]xxxxxxxx[/COLOR]</item>
where 'xxxxxxxx' is some value.
Change xxxxxxxx to as per your need of transparency level:
00000000 - 100% transparency
3F000000 - 75% transparency
7F000000 - 50% transparency
BF000000 - 25% transparency
FF000000 - 0% transparent (No transparency)
Save it and close
3. And do the same with:
(a) SystemUI\res\values-sw600dp\drawables.xml
Code:
<item type="drawable" name="status_bar_background">#[COLOR="red"]xxxxxxxx[/COLOR]</item>
Save it and close
(b) SystemUI\res\values-sw800dp\drawables.xml
Code:
<item type="drawable" name="status_bar_background">#[COLOR="red"]xxxxxxxx[/COLOR]</item>
Save it and close
This will make your StatusBar transparent as per your values.
Now for making StatusBar Expanded/Notification Background transparent.
1. In WORKING folder go to- SystemUI\res\values
2 Open drawables.xml using notepad++ and in this line:
Code:
<item type="drawable" name="notification_tracking_bg">#[COLOR="red"]xxxxxxxx[/COLOR]</item>
Change xxxxxxxx to as per your need of transparency level.
Save it and close
3. And do the same with:
(a) SystemUI\res\layout\tw_status_bar_tracking.xml
Code:
<FrameLayout android:background="#[COLOR="red"]xxxxxxxx[/COLOR]" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_weight="1.0" />
Save it and close
(b) SystemUI\res\layout\tw_status_bar_tracking_dual.xml
Code:
<LinearLayout android:gravity="bottom" android:orientation="vertical" android:background="#[COLOR="red"]xxxxxxxx[/COLOR]" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_weight="1.0" />
Save it and close.
This will make your StatusBar Expanded/Notification Background transparent as per your values.
Now recompile and sign SystemUI.apk with the help of that READ_ME.txt file.
--------------------------------------------------------------------------------------------------------------------------------------------
Enjoy! :good:
And Dont Forget To Press Thanks :good: Button
IF YOU LIKE MY WORK, PLEASE CONSIDER ANY DONATION FOR CONTINUE DEVELOPMENT

Isn't it too .... complicated for a simple user?
Can't you make a simple zip and we ll flash through cwm
Anyway thanks for your work for our device.
Sent from my GT-S7562 using xda premium

saifzahid said:
Isn't it too .... complicated for a simple user?
Can't you make a simple zip and we ll flash through cwm
Anyway thanks for your work for our device.
Sent from my GT-S7562 using xda premium
Click to expand...
Click to collapse
It can be complicated but its a most simple way
You can try it, afterwards may be you will not find this complicated
And its good for learning new thing...
It can help you for many other devices and for making transparencies in many other apps too
Sent from my GT-S7562 using Tapatalk 2

Can i do it on stock rom....nd is this really workss...i mean is there any risk
Sent from my GT-S7562 using xda premium

mohit.bhagat1 said:
Can i do it on stock rom....nd is this really workss...i mean is there any risk
Sent from my GT-S7562 using xda premium
Click to expand...
Click to collapse
Yes you can do it on stock rom
Yes it works for sure with no risk
Just do the steps clearly
And its better to keep backup of original SystemUI.apk :good:

Mohitash said:
Hi Samsung Galaxy S Duos GT-S7562 users
Many of you asked me questions/helps for regarding transparency in our device.
So, i decided to make a help thread for everyone for GT-S7562 [This is what i did to make transparency in my GT-S7562 ]
This guide will tell you to how to enable transparency and modding transparency levels in your device.
You will need:
1. 7zip
2. Notepad++
3. ApkToolv3 Donwload here (Not any other ApkTool) [For this ApkTool, Credit goes to Kryten2k35]
Now the steps:
1. Extract apktoolv3
2 There will be a 'READ_ME.txt file, with the help of this decompile your SystemUI.apk
3. Now open WORKING folder and go to- SystemUI\smali\com\android\systemui\statusbar
4. Open StatusBar.smali with notepad++ and search for this:
Code:
Landroid/view/WindowManager$LayoutParams;->(IIIII)V
Go to the line above it and change the last value to -0x3
Save it and close
This will enable the transparency for StatusBar
Now for StatusBar Expanded/Notification Background
1. Go to- SystemUI\smali\com\android\systemui\statusbar\phone
2. Open PhoneStatusBar.smali with notepad++ and search for this:
Code:
const v4, 0x4800068
replace the 2 lines underneath with this:
Code:
const/4 v5, -0x3
move v2, v1
Now search for this:
Code:
Lcom/android/systemui/statusbar/phone/PhoneStatusBar;->mPixelFormat:I
Go to the line above it and change the last value to -0x3
Save it and close.
This will enable transparency in your device
Now for making transparency
1. In WORKING folder go to- SystemUI\res\values
2. Open drawables.xml using notepad++ and in this line:
Code:
<item type="drawable" name="status_bar_background">#[COLOR="Red"]xxxxxxxx[/COLOR]</item>
where 'xxxxxxxx' is some value.
Change xxxxxxxx to as per your need of transparency level:
00000000 - 100% transparency
3F000000 - 75% transparency
7F000000 - 50% transparency
BF000000 - 25% transparency
FF000000 - 0% transparent (No transparency)
Save it and close
3. And do the same with:
(a) SystemUI\res\values-sw600dp\drawables.xml
Code:
<item type="drawable" name="status_bar_background">#[COLOR="red"]xxxxxxxx[/COLOR]</item>
Save it and close
(b) SystemUI\res\values-sw800dp\drawables.xml
Code:
<item type="drawable" name="status_bar_background">#[COLOR="red"]xxxxxxxx[/COLOR]</item>
Save it and close
This will make your StatusBar transparent as per your values.
Now for making StatusBar Expanded/Notification Background transparent.
1. In WORKING folder go to- SystemUI\res\values
2 Open drawables.xml using notepad++ and in this line:
Code:
<item type="drawable" name="notification_tracking_bg">#[COLOR="red"]xxxxxxxx[/COLOR]</item>
Change xxxxxxxx to as per your need of transparency level.
Save it and close
3. And do the same with:
(a) SystemUI\res\layout\tw_status_bar_tracking.xml
Code:
<FrameLayout android:background="#[COLOR="red"]xxxxxxxx[/COLOR]" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_weight="1.0" />
Save it and close
(b) SystemUI\res\layout\tw_status_bar_tracking_dual.xml
Code:
<LinearLayout android:gravity="bottom" android:orientation="vertical" android:background="#[COLOR="red"]xxxxxxxx[/COLOR]" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_weight="1.0" />
Save it and close.
This will make your StatusBar Expanded/Notification Background transparent as per your values.
Now recompile and sign SystemUI.apk with the help of that READ_ME.txt file.
--------------------------------------------------------------------------------------------------------------------------------------------
Enjoy! :good:
And Dont Forget To Press Thanks :good: Button
Click to expand...
Click to collapse
You rock man... keep gng...!!!
Sent from my GT-S7562 using xda app-developers app

Thanks, this is really what i had been looking for a few days back but gave up due to lack of time. Now this has got me interested
Hit thanks if I helped
sent from GT-S7562 with a better,faster and stronger stock ROM

einst31n said:
Thanks, this is really what i had been looking for a few days back but gave up due to lack of time. Now this has got me interested
Hit thanks if I helped
sent from GT-S7562 with a better,faster and stronger stock ROM
Click to expand...
Click to collapse
Dude, you havent seen this before? My this thread is very old.
Well good luck
Sent from my GT-S7562 using Tapatalk 2

Man i had really been out of touch with xda because i just got some preparations to do. I just got into my final year and immediately got busy with the placement stuff and all. I didnt upload any themes which i had made either coz of the fact that indian hostels dont provide a fast and reliable net
Will find time to continue my work hopefully
Hit thanks if I helped
sent from GT-S7562 with a better,faster and stronger stock ROM

Superb
Sent from my GT-S7562 using xda app-developers app

[GUIDE][SecLauncher] Make seclauncher(samsung launcher) super snappy and fast

This guide is just a quick guide on making seclauncher faster by changing integers...
the only tool you need would be the one i made here - Quickmod tool
1. Decompile seclauncher (in my case seclaucher3.apk)
2. go to res/values and open integers.xml
3. Find this line (note, your integer value might be different in any of these steps)
NOTE: the lower the value the faster the launcher gets. mine just maintain the smootheness.
Code:
<integer name="config_workspaceUnshrinkTime">[COLOR="Red"]300[/COLOR]</integer>
Change it to
Code:
<integer name="config_workspaceUnshrinkTime">[COLOR="Blue"]250[/COLOR]</integer>
4. Find this
Code:
<integer name="config_appsCustomizeWorkspaceAnimationStagger">[COLOR="Red"]40[/COLOR]</integer>
Change it to
Code:
<integer name="config_appsCustomizeWorkspaceAnimationStagger">[COLOR="Blue"]30[/COLOR]</integer>
5. Find these
Code:
<integer name="config_crosshairsFadeInTime">[COLOR="Red"]600[/COLOR]</integer>
<integer name="config_dragOutlineFadeTime">[COLOR="red"]900[/COLOR]</integer>
<integer name="config_folderAnimDuration">[COLOR="red"]200[/COLOR]</integer>
<integer name="config_scrollZoneScrollDelay">[COLOR="red"]500[/COLOR]</integer>
Change them to
Code:
<integer name="config_crosshairsFadeInTime">[COLOR="Blue"]525[/COLOR]</integer>
<integer name="config_dragOutlineFadeTime">[COLOR="blue"]800[/COLOR]</integer>
<integer name="config_folderAnimDuration">[COLOR="blue"]175[/COLOR]</integer>
<integer name="config_scrollZoneScrollDelay">[COLOR="blue"]400[/COLOR]</integer>
6. Find this
Code:
<integer name="config_pagePreviewSnapDelay">[COLOR="Red"]400[/COLOR]</integer>
Change it to
Code:
<integer name="config_pagePreviewSnapDelay">[COLOR="Blue"]300[/COLOR]</integer>
7. This step the folder could differ, Go to res/values-sw359dp-xxhdpi <------ this could very likely be different.
8. Open integers.xml
9. Find this
Code:
<integer name="page_snap_animation_duration">[COLOR="Red"]520[/COLOR]</integer>
Change it to
Code:
<integer name="page_snap_animation_duration">[COLOR="blue"]300[/COLOR]</integer>
And thats it! recompile and feel how speedy/smoothe it is

thanks mate!

This sounds wonderful, but I have a question, if anyone can answer, if its this simple to make it much better, why is Sammy sending it out the way it is now aka crappy, when Sammy themselves could put it out with the new settings and be better out of the box. Do Sammy have a reason for sending out with the original settings? saving battery or some other reason?
I don't want to sound like I'm knocking your stuff but I don't understand why something this simple isn't already done.
Sent from my GT-I9505 using xda app-developers app

I decompile my seclauncher3.apk but there is no values folder in res and no integers.xml file in any folder I'm using JB4.3 XXUEMK9 I9505
Send from my I9505 using XDA Premium App

ranger4740 said:
This sounds wonderful, but I have a question, if anyone can answer, if its this simple to make it much better, why is Sammy sending it out the way it is now aka crappy, when Sammy themselves could put it out with the new settings and be better out of the box. Do Sammy have a reason for sending out with the original settings? saving battery or some other reason?
I don't want to sound like I'm knocking your stuff but I don't understand why something this simple isn't already done.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I would not have a clue..
LyuboA said:
I decompile my seclauncher3.apk but there is no values folder in res and no integers.xml file in any folder I'm using JB4.3 XXUEMK9 I9505
Send from my I9505 using XDA Premium App
Click to expand...
Click to collapse
Well then it hasnt decompiled properly...

not working
I decompile my seclauncher3 with apk tool and change the value but not the same as your values and recompile but its not working. I have gt i9500 with 4.3. Can you post your seclauncher3.apk? Thanks

[email protected] said:
I decompile my seclauncher3 with apk tool and change the value but not the same as your values and recompile but its not working. I have gt i9500 with 4.3. Can you post your seclauncher3.apk? Thanks
Click to expand...
Click to collapse
change the values to the same as mine!

ricky310711 said:
change the values to the same as mine!
Click to expand...
Click to collapse
Can u do an example for us with this i9505 MKF seclauncher: https://www.dropbox.com/s/fj0s50ovu6...cLauncher3.apk
I can't find the value folder either

tranbeelze said:
Can u do an example for us with this i9505 MKF seclauncher: https://www.dropbox.com/s/fj0s50ovu6...cLauncher3.apk
I can't find the value folder either
Click to expand...
Click to collapse
decompile it and upload the res folder?

ricky310711 said:
decompile it and upload the res folder?
Click to expand...
Click to collapse
here is the res folder: https://www.dropbox.com/s/4o9kgmx3i0dq8ti/res.zip :fingers-crossed:

tranbeelze said:
here is the res folder: https://www.dropbox.com/s/4o9kgmx3i0dq8ti/res.zip :fingers-crossed:
Click to expand...
Click to collapse
Hmm, did you install framework prior to this? Send me your .apk!

works now.thanks man

Those with seclauncher2? Can this work for me?
Sent from my GT-N7000 using xda premium

NoteboyTech said:
Those with seclauncher2? Can this work for me?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
ofcoarse!

i will be adding more to this soon!

Does someone know what I have to do to maximize the numbers of apps placed at the bottom of the screen?
I mean the place, where the menu icon is located. (is it called menu bar? I don't know )
And would it be possible to make this bar scrollable (like the homescreen itself)?

Praetoriani said:
Does someone know what I have to do to maximize the numbers of apps placed at the bottom of the screen?
I mean the place, where the menu icon is located. (is it called menu bar? I don't know )
And would it be possible to make this bar scrollable (like the homescreen itself)?
Click to expand...
Click to collapse
you need to mod the values in dimens.xml

ricky310711 said:
you need to mod the values in dimens.xml
Click to expand...
Click to collapse
So this is the content of \res\values\dimens.xml
Code:
<item type="dimen" name="config_menuBgDarkenAmountNormal">0.1</item>
<item type="dimen" name="config_bgDarkenAmountEdit">0.3</item>
<item type="dimen" name="config_wsBaseDarkenAmountEdit">0.1</item>
<item type="dimen" name="config_bgDarkenAmountContextualPage">0.4</item>
<dimen name="folderIcon_hCenterAlign">-100.0px</dimen>
<dimen name="folderIcon_hRightAlign">-200.0px</dimen>
<dimen name="hoverScrollVerticalPaddingMatchParent">-1.0px</dimen>
<dimen name="config_dynamicShadowOffset">2.669983dip</dimen>
<dimen name="config_dynamicShadowBorder">1.0dip</dimen>
<dimen name="ged_home_cellWidth_land">106.0dip</dimen>
<dimen name="ged_home_cellWidth_port">80.0dip</dimen>
<dimen name="ged_home_cellHeight_land">74.0dip</dimen>
<dimen name="ged_home_cellHeight_port">100.0dip</dimen>
<dimen name="downloaded_text_padding">0.0dip</dimen>
<dimen name="help_hub_gallery_image_margin_left">0.0dip</dimen>
<dimen name="help_hub_gallery_image_margin_top">0.0dip</dimen>
<dimen name="help_hub_live_wallpaper_image_margin_left">0.0dip</dimen>
<dimen name="help_hub_live_wallpaper_image_margin_top">0.0dip</dimen>
<dimen name="help_hub_wallpaper_image_margin_left">0.0dip</dimen>
<dimen name="help_hub_wallpaper_image_margin_top">0.0dip</dimen>
<dimen name="help_hub_wallpaper_type_image_margin_top">0.0dip</dimen>
<dimen name="menu_downloaded_icon_margin_top">0.0dip</dimen>
<dimen name="help_hub_change_wallpaper_pointer_up_margin_top">0.0dip</dimen>
<dimen name="help_hub_move_apps_up_pointer_margin_top">0.0dip</dimen>
<dimen name="help_hub_chooser_insert_item_pointer_up_margin_top">0.0dip</dimen>
Which values I have to edit to put more icons/apps at the bottom of my screen?
Or do you mean a different dimens.xml? I found some more in \res\values-sw800dp\ and \res\values-sw800dp-land\

Praetoriani said:
So this is the content of \res\values\dimens.xml
Code:
<item type="dimen" name="config_menuBgDarkenAmountNormal">0.1</item>
<item type="dimen" name="config_bgDarkenAmountEdit">0.3</item>
<item type="dimen" name="config_wsBaseDarkenAmountEdit">0.1</item>
<item type="dimen" name="config_bgDarkenAmountContextualPage">0.4</item>
<dimen name="folderIcon_hCenterAlign">-100.0px</dimen>
<dimen name="folderIcon_hRightAlign">-200.0px</dimen>
<dimen name="hoverScrollVerticalPaddingMatchParent">-1.0px</dimen>
<dimen name="config_dynamicShadowOffset">2.669983dip</dimen>
<dimen name="config_dynamicShadowBorder">1.0dip</dimen>
<dimen name="ged_home_cellWidth_land">106.0dip</dimen>
<dimen name="ged_home_cellWidth_port">80.0dip</dimen>
<dimen name="ged_home_cellHeight_land">74.0dip</dimen>
<dimen name="ged_home_cellHeight_port">100.0dip</dimen>
<dimen name="downloaded_text_padding">0.0dip</dimen>
<dimen name="help_hub_gallery_image_margin_left">0.0dip</dimen>
<dimen name="help_hub_gallery_image_margin_top">0.0dip</dimen>
<dimen name="help_hub_live_wallpaper_image_margin_left">0.0dip</dimen>
<dimen name="help_hub_live_wallpaper_image_margin_top">0.0dip</dimen>
<dimen name="help_hub_wallpaper_image_margin_left">0.0dip</dimen>
<dimen name="help_hub_wallpaper_image_margin_top">0.0dip</dimen>
<dimen name="help_hub_wallpaper_type_image_margin_top">0.0dip</dimen>
<dimen name="menu_downloaded_icon_margin_top">0.0dip</dimen>
<dimen name="help_hub_change_wallpaper_pointer_up_margin_top">0.0dip</dimen>
<dimen name="help_hub_move_apps_up_pointer_margin_top">0.0dip</dimen>
<dimen name="help_hub_chooser_insert_item_pointer_up_margin_top">0.0dip</dimen>
Which values I have to edit to put more icons/apps at the bottom of my screen?
Or do you mean a different dimens.xml? I found some more in \res\values-sw800dp\ and \res\values-sw800dp-land\
Click to expand...
Click to collapse
fo to res/values-**dpi and look for dimens.xml, there should be alot more then that!

Good
Work Perfect on my galaxy s2 plus 4.2.2
Thank You

[Guide] How to change notification text color to make it look like L

Hello Xda Today I'm Sharing A Guide By @eboybasit Thanks to him For Giving Permission For Posting here :laugh:
Q What Is this?
ans- How to change notification text color to make it look like L
requiremnts
-apktool
-notepad++
-brain.jar
-Framework-res.apk
-Decompile Framework-res.apk
-open res/values/styles.xml
-Search for something similar to this:
Code:
<style name="TextAppearance.StatusBar.EventContent" parent="@style/TextAppearance.StatusBar">
<item name="textSize">@dimen/notification_text_size</item>
<item name="textColor">‪#‎ff999999‬</item>
</style>
Change It To Like This
Code:
<style name="TextAppearance.StatusBar.EventContent" parent="@style/TextAppearance.StatusBar">
<item name="textSize">@dimen/notification_text_size</item>
<item name="textColor">‪#‎ff008080‬</item>
</style>
Now Search For This
Code:
<style name="TextAppearance.StatusBar.EventContent.Title" parent="@style/TextAppearance.StatusBar.EventContent">
<item name="textSize">@dimen/notification_title_text_size</item>
<item name="textStyle">bold</item>
<item name="textColor">‪#‎ffffffff‬</item>
<item name="fontFamily">sans-serif-light</item>
</style>
change it like this
Code:
<style name="TextAppearance.StatusBar.EventContent.Title" parent="@style/TextAppearance.StatusBar.EventContent">
<item name="textSize">@dimen/notification_title_text_size</item>
<item name="textStyle">bold</item>
<item name="textColor">#ff008080</item>
<item name="fontFamily">sans-serif-light</item>
<item name="shadowColor">‪#‎ff000000‬</item>
<item name="shadowRadius">1.0</item>
<item name="shadowDy">1.0</item>
<item name="shadowDx">1.0</item>
</style>
Now Find This
Code:
<style name="TextAppearance.StatusBar.EventContent.Line2" parent="@style/TextAppearance.StatusBar.EventContent">
<item name="textSize">@dimen/notification_subtext_size</item>
</style>
Change It to look like this
Code:
<style name="TextAppearance.StatusBar.EventContent.Line2" parent="@style/TextAppearance.StatusBar.EventContent">
<item name="textColor">#ff008080</item>
<item name="textSize">@dimen/notification_subtext_size</item>
</style>
SAVE THE XML:victory:
Now open Dimens.xml
and find this two lines
Code:
<dimen name="notification_title_text_size">18.0dip</dimen>
<dimen name="notification_subtext_size">12.0dip</dimen>
change it to.this
Code:
dimen name="notification_title_text_size">15.0dip</dimen>
<dimen name="notification_subtext_size">9.0dip</dimen>
save
recompile
pUsh
reboot
enjoy
Credits:-
Iian Armas
 @eboybasit

Awesome guide
Thanks. •﹏•

Thanks Bro

Screenshots please

Sorry sir i deleted My mod After this Guide So I cant take ss

nice guide thanks for this hope it works

Thanks Sir

ShadeSK said:
Thanks Sir
Click to expand...
Click to collapse
Unfortunately it doesn't compile :/ Says something about that value is not rrggbb or something like that

Can u plz Provile.Styles.xml and error log here?

ShadeSK said:
Can u plz Provile.Styles.xml and error log here?
Click to expand...
Click to collapse
Here you go see if you can help me. Error log is below
Styles.xml

kirito9 said:
Here you go see if you can help me. Error log is below
Styles.xml
Click to expand...
Click to collapse
Open Ur Styles.xml then find line no .889 Then bro Change Text color blabla =" '‪#‎ff008080‬'" to text color blabla ="008080" save compile enjoy

Try this
Open Ur Styles.xml then find line no .889 Then bro Change Text color blabla =" '‪#‎ff008080‬'" to text color blabla ="008080" save compile enjoy

thanks i will try it
Sent from my 4032A using XDA Free mobile app

ShadeSK said:
Open Ur Styles.xml then find line no .889 Then bro Change Text color blabla =" '‪#‎ff008080‬'" to text color blabla ="008080" save compile enjoy
Click to expand...
Click to collapse
I ended up removing the lines that were causing the error. Yes another line in the xml gave a recompile error. But here is my screenshot, idk if those were the only things to look different.

It is Real

It would be a nice add on the next version of materialized dark theme

Mr said:
It would be a nice add on the next version of materialized dark theme
Click to expand...
Click to collapse
hehe Yep