I've played many games Sensor on many different phones, but for Acer S200, I can not play (or did not find a suitable game for it). So, I need a few games sensor can be played on the phone.
Hi,
many gsensor games are working on our S200:
resco snake, bubbles,... and the best beautifull game actually is nfs shift !!
may be you will need the sdk sensor dll's from HTC (google is ur friend)
++
nogit said:
Hi,
many gsensor games are working on our S200:
resco snake, bubbles,... and the best beautifull game actually is nfs shift !!
may be you will need the sdk sensor dll's from HTC (google is ur friend)
++
Click to expand...
Click to collapse
I do not understand. Can you help me?
nfs shift
I'm using Arto's sense 3.9.2 on my Acer S200, but in Nfs shift the steer left and right doesn't work when i tilt the device left and right.
How can i setup this?
You need to install HTC g-sensor and D3D packs.
d3d low fps nfs shift
sorry, but when can i find d3d pack for our s200? The g-sensor is ok, but is it normal that the game is very slow,it snaps (very low fps), or with d3d will be fluid?
sorry for my bad english! bye
s200 neotouch nfs shift d3d chainfire
Hi, finally i installed "chainfire turbo3d 3.00" and i set it up in "smooth" mode(is it correct?). It's better than before, but still not fluid as others devices (as hd2,desire....video from youtube), in fact in the timer during the game the seconds are very slow. What's my mistake? Our Neotouch shouldn't be able to play this game easily with its power? thank you
ps: do i have to install chainfire tg01 d3d file also?
Man, u need to do these things:
1) Delete chainfire turbo 3d (i think it is bad on our device because after I've installed it, nfs have started to be more slow - fps decreased)
2) With using any alternative (!!!) File explorer (I'm using Resco File Explorer), copy file "yamato_panel" from root folder of the device to the storage card (or PC, if u dont have a card), open it, change 0 to 1 (u must have after it 2D.HwBlt=1 in file), save changes. Then copy this changed file from card (or PC) to the root folder (click YES when asks for replace).
3) Copy HTCSensorSDK.dll to the root folder (u can find this file in web, it is 7680 bytes, if u will not can find, ask me in private message) and to the \Windows folder too.
4) Soft reset your device.
5) Enjoy! NFS Shift HD (99 Mb cab file) must work nice now.
If you are using my Manila or my Clean ROM, then everything works fine. You can play NFS Shift without any problems.
If you are on Manila ROM, then first disable Sense.
Hi! Thank you very much. Following justrazor's instructions now i can play very well. (i have acer original rom). Thank you!
hello
please send me the link of nfs shift cab
nfs shift link???????? CAB ......!!!!!!!!!! FOR ACER S200
Help
I have a Acer s200.
NFS Shift don't work, the game run, but gsensor not work (but the picture of all of the program turns away). Help me please!
HTCSensorSDK I installed it, and I rewrote the txt file.
copa68 - unzip HTCSensorSDK and copy to Windows folder,restart
I'm very disappointed...
i did it what you said, the game run, but gsensor not work success (the whole game turns away, but the car goes straight)... Why???
hello
any body can post a link of nfs shift
xmaxin said:
any body can post a link of nfs shift
Click to expand...
Click to collapse
Have you read the rules:
6. Do not post warez.
If a piece of software requires you to pay to use it, either pay or find your cracks and serials somewhere else. We do not accept warez nor do we permit any member to promote or describe ways in which Warez, cracks, serial codes or other means of avoiding payment, can be obtained.
9. Don't get us in trouble.
Don't post copyrighted materials or do other things that will obviously lead to legal trouble. If you wouldn't do it on your own homepage, you probably don't want to do it here either. This does not mean we agree with everything the software piracy lobby try to impose on us, it simply means you cannot break any laws here, since we'll end up dealing with legal hassle caused by you. Please use common sense: respect the forum, its users, and those that write great code.
Click to expand...
Click to collapse
help
justrazor said:
Man, u need to do these things:
1) Delete chainfire turbo 3d (i think it is bad on our device because after I've installed it, nfs have started to be more slow - fps decreased)
2) With using any alternative (!!!) File explorer (I'm using Resco File Explorer), copy file "yamato_panel" from root folder of the device to the storage card (or PC, if u dont have a card), open it, change 0 to 1 (u must have after it 2D.HwBlt=1 in file), save changes. Then copy this changed file from card (or PC) to the root folder (click YES when asks for replace).
3) Copy HTCSensorSDK.dll to the root folder (u can find this file in web, it is 7680 bytes, if u will not can find, ask me in private message) and to the \Windows folder too.
4) Soft reset your device.
5) Enjoy! NFS Shift HD (99 Mb cab file) must work nice now.
Click to expand...
Click to collapse
my friend,,,help me please,,, it doesn't turns left and right,,,but the game speed is ok,,,i use original explorer to do all tha thinks you tell,,,
Hello All,
Same problem. Doesn't want to turn. Any solutions or ideas?
zoran974 said:
Hello All,
Same problem. Doesn't want to turn. Any solutions or ideas?
Click to expand...
Click to collapse
If u use Resco snake... delete it!
Related
I recently upgrade my Hermes to WM6 and there is no Bubble Breaker on my phone
If searched the forums and google but I haven't found it anywhere.
Thanks in advance!
Anyone....?
doubt you can find it as a cab as it normaly is included in the rom
most likely you can just take the 1 exe file from another device
Here is the exe file from my wm6 rom - place in \windows and try it. I tested its dependencies and there are 3 dll files - hopefully you have these in your rom already.
Thanks meschle but I couldn't get it to work. When I put it in \windows I get these error messages:
SHCreateMenuBar Failed
which is followed by:
Cannot open Bubble Breaker resource file
I have a total of 4 BubbleBreaker files in my \windows directory.
BubbleBreaker.dat
BubbleBreaker.exe
BubbleBreaker.htm
BubbleBreaker.lnk
http://www.oopdreams.com/ce/bubblets/#download ...this is the EXACT game.. i installed it on my ppc and its exactly the same thing.. same options same sounds..hell i even installed the pc ver its the same thing too and when u google "bubblets" ull see its bubblets aka bubble breaker.. if u need a key to reg it drop me a line.
when u open bubble breaker that comes standard in windows mobile and go to about its made by the OOP Dreams.. same company.
lakers8833 said:
Thanks meschle but I couldn't get it to work. When I put it in \windows I get these error messages:
SHCreateMenuBar Failed
which is followed by:
Cannot open Bubble Breaker resource file
I have a total of 4 BubbleBreaker files in my \windows directory.
BubbleBreaker.dat
BubbleBreaker.exe
BubbleBreaker.htm
BubbleBreaker.lnk
Click to expand...
Click to collapse
Oh you did not mention you already had it in your rom - probably a problem with the cooked rom your using - can you not try another rom as finding the problem may be quite difficult?
Jakeypoo thanks so much. Thats indentical to bubble breaker.
Meschle, I sent those files to my phone from my friends phone. They were not on there initially, I put them there after attempting to use the file you suggested.
Thanks for the help everyone.
Hi, Im using a rom without bubble breaker, but its a great rom... I miss bubble breaker. Does anyone see a way to add it? I also have
SHCreateMenuBar Failed
which is followed by:
Cannot open Bubble Breaker resource file
when I copy the exe into win dir.
any help is appreciated.
http://forum.xda-developers.com/showpost.php?p=3162574&postcount=184
10nx 2 cuboosh itz really Bubble Breaker az iz!oh, fok dat **** - itz trial but i found a key
Download here from a list of Cabs
http://diamond.geg0r.de/index.php?dir=christonge%2FExtra+cab+files%2F
Hello,
I am having the same problem when launching BubbleBreaker - SHCreateMenuBar failed, then device freezes. Sometimes I even have to soft reset it.
Now, besides BubbleBreaker being a favourite game, I'd like to be able to fix that issue. The link above doesn't work. However, I tried using BubbleBreaker.exe from my other device - when I try to paste "BubbleBreaker.exe" into the Windows directory, I get "Access denied" message. Is there a way to cheat the system, and will this actually work?
The device I am talking about is Sharp S01SH, firmware updated to 1.05a, running OS 5.1.476.3 AKU .3.5.0.
Thanks!
Right, found a few different CABs for BubbleBreaker and Solitaire. Installed - BubbleBreaker now works but is a quite different version from what I know it to be...
Solitaire doesn't work (neither of the three shortcuts that appeared in Programs/Games).
At least the annoying SHCreateMenuBar error is gone.
These work on Tilt "Bubble Breaker & Solitaire"
None of the cabs I tried install tje game as I know it. And these only make a new installation in Program Files, they do not fix/replace the built in Bubble breaker.
I tried copying the exe and other files from my other device, w-zero3, and replaced the existing ones on my s01sh - still the same shcreatemenubar failed error...
cuboosh said:
http://www.oopdreams.com/ce/bubblets/#download ...this is the EXACT game.. i installed it on my ppc and its exactly the same thing.. same options same sounds..hell i even installed the pc ver its the same thing too and when u google "bubblets" ull see its bubblets aka bubble breaker.. if u need a key to reg it drop me a line.
when u open bubble breaker that comes standard in windows mobile and go to about its made by the OOP Dreams.. same company.
Click to expand...
Click to collapse
Hello need one license for this game, but my girlfriend I will kill xdxdxd
It works great
For me with the original T2 WM 6.5 it works great
Thanks
what do i do if i need to drop a bubblebreaker cab into a samsung rant (no windows mobile). is it possible?
Sorry, you can't do much with it. At best you'll be able to see it as an archive, as you do on your desktop.
need serial (BUBBLETS)
sory, someone can help me? i installed the bubllets from here, mensioned at the previsious post, but i need the serial, its the only game that works for me, even the original cabs ddnt work.
Thanks for helping
Cheers.
Sorry, meant, how do i install games onto FPSece on my LG incite
Please and thank you
I seriously doubt your PDA can even handle PSX games.. let alone store more than one ROM on your Phone.. but if you really want to then i guess you should google it.
I googled it from before, but i found the game in 30 parts (Disc 1, part 1, Dis 2, Part 2, etc...)
nd they were all RAR files, so how am i supposed to install that as a ROM
chumpu said:
I googled it from before, but i found the game in 30 parts (Disc 1, part 1, Dis 2, Part 2, etc...)
nd they were all RAR files, so how am i supposed to install that as a ROM
Click to expand...
Click to collapse
The sharing of psx roms is illegal and the discussion of warez is banned on this site
EDIT: I didnt realize that talking about getting links to roms was illegal until i read the post before me so i just deleted the links
I broke down the steps just to make them easy to follow because i remember searching for a while when trying to play my first game
I assume that you already extracted teh fpsece zip file to your phone. If you didn't yet, make sure you make a new folder on your phone somewhere on the sd card and label it Fpsece, or whatever you like as long as you can locate it. When you downloaded fpsece, it should be in a zip. Extrap all of the files in the zip (yes all of them) to the folder that you created on your sd card. Once extracted, go to your phone and open up File Explorer and find the new folder you created. Next click on FPSEce.exe (it has a playstation icon). From there you should be in the main menu. Select Options, Bios, Choose bios, and select SCPH1001.BIN. Now that you have selected it, go to options, Misc, Display, and select Portrait suince you dont have a keyboard or if you have a bluetooth gaming pad, you can select Landscape.
Now to play the game, press start, and if the game ends in like .bin, .iso, .img, .nrg, .z, .bz, or .znx, press ISO and select the game. If the game ends in .psx, .exe, .elf, or .cpe, press ESE. You should be able to play the game now!
Hee hee, its Leo from VG Cats. I like their comics. Happy Holidays!
THis thread is going now where and dur to questionable material, i am closing it.
Hello together!
After installing TomTom on my HD2 the internal Bluetooth-function doesn´t work...as far as I know it is recommended to rename/delete the following files to fix this issue:
BTTrayCE.exe, BtSdkCE30.dll and BtCoreIf.dll
But in fact I can´t rename/delete any of these files...tried with windows explorer, TotalCommander and the HD2 Explorer (I don´t know if they are in use?! according to the task mangager they aren´t)
So could anybody please upload these 3 files from a working HD2 Device?
I renamed BtSdkCE30.dll and deleted BtCoreIf.dll.
For some reason BtSdkCE30.dll was in use, but I was able to rename it.
As far as I know you leave BTTrayCE.exe the way it is.
Done with Total Commander btw.
Maybe restart your HD2 if you can't even rename them, then try again before doing anything else.
Tomtom doesn't list the software as compatible with the HD2...
So i can imagine none of you did buy it and all use a not compatible cracked version. tttttttttttttttt
So now enjoy the dark side !!!!!!
brooon said:
Hello together!
After installing TomTom on my HD2 the internal Bluetooth-function doesn´t work...as far as I know it is recommended to rename/delete the following files to fix this issue:
BTTrayCE.exe, BtSdkCE30.dll and BtCoreIf.dll
But in fact I can´t rename/delete any of these files...tried with windows explorer, TotalCommander and the HD2 Explorer (I don´t know if they are in use?! according to the task mangager they aren´t)
So could anybody please upload these 3 files from a working HD2 Device?
Click to expand...
Click to collapse
this works with almost any problem situation with tomtom...
preferable, install to memorycard on another device, then run tomtom from card without installing it, cause you put all the files on memorycard already... yes i did buy it for my touch pro...
If you are installing with a cab file,
Install in your storage card and hard reset.
Now, don't install again.Copy tomtomnavigator.exe from program folder in storage card and place a shorcut in windows programs folder.
blue8300 said:
Tomtom doesn't list the software as compatible with the HD2...
So i can imagine none of you did buy it and all use a not compatible cracked version. tttttttttttttttt
So now enjoy the dark side !!!!!!
Click to expand...
Click to collapse
It's working well on my HD2 without issues.
Hey there!! First, thank you for your answers!
Well, i really don´t want to make a hard reset!! TomTom itself runs very well on the device (and it runs on my device too), my only problem is that the bluetooth will not work as long as these three files have not been deleted or rather been exchanged with the untouched files .
Let me explain that: If files have been deleted, the HD2 will restore them from the rom automaticly after a reboot and everything is fine. Most people who had to handle with the same problem (TomTom vs. Bluetooth) had success with this method, but a few devices deny the access on these files, so they can´t be deleted or renamed. So is mine.
And for this reason I asked for the original files from a working rom! It would make it possible for me to replace my corrupt files...
Has anybody of you guys a few minutes of time an wants to upload the three files please?
It would really make my day!!
brooon said:
Let me explain that: If files have been deleted, the HD2 will restore them from the rom automaticly after a reboot and everything is fine. Most people who had to handle with the same problem (TomTom vs. Bluetooth) had success with this method, but a few devices deny the access on these files, so they can´t be deleted or renamed. So is mine.
Click to expand...
Click to collapse
If device deny access to files, they cannot be renamed or deleted, you cannot replace them with other files too... (do you tried Resco Explorer?)
I have made a personalized cab of TomTom Navigator which doesn't install the bluetooth-specific files. If needed I can upload it somewhere and give you the link via PM
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
xardus said:
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
Click to expand...
Click to collapse
In TT tap to GPS signal bar and next tap on button with version number
Petulinek said:
In TT tap to GPS signal bar and next tap on button with version number
Click to expand...
Click to collapse
i know that...but without a map activated i cant see that screen...it only says "ur map isnt activated" and only button i have is for download a voucher....i try with an older version but i cant find tomtom 5 on the web
xardus said:
to do not open a new post...about tom tom can anyone tell me how to get the "phone code" to provide to tomtom for maps activations? in my artemis was writed in a menu of 6 version...i tryed that too but dont show anything....im going mad!!
Click to expand...
Click to collapse
You mean the device ID?
You can open the ttnavigator.bif with notepad in your PC for the device details.
How I fixed the problem
I had the same problem, so I deleted the three files with resco. Two of the files will "appear" not to be deleted because they are ROM files. The important thing is that you need to have a shortcut to BTTrayCE.exe in \Windows\Startup.
Thanks for the posts!
As I said, it´s not possible to delete the files in my case...thats why i want some original files to exchange them.
...Is nobody out there how wants to upload these three little files for me? ...
I had this, All I did was launch TC, goto \windows do a select bt* delete all files, and it fails to delete most of them, but soon as I did that BT came back to life....
I can't help with the missing files as my device has still to arrive but I read that installing version 7.915.9196 VGA from HTC Iolite works without the bluetooth problem.
hey guys i could really use that bluetooth file.. i sorta messed it up too with the tom tom...
Hey Londontownguy:
Thanks for your suggestion! But as i said above, i really don´t want to hard reset. And the 7.915.9196 VGA from HTC Iolite doesn´t contain the "healthy" files, so an installation without hardreset doesn´t fix the problem.
Now we are two people including phatjesus81...andagain:
...Is nobody out there how wants to upload these three little files?...
myeah..
i cant start my bluetooth anymore because last week after installing tomtom7 i got the error and baleeted BTTrayCE.exe somewhere , even though it is in my \windows\ folder together with the btcore and btsdkce50 dlls.. cant remove those..
so BBTrayCE.exe is in my windows folder right now , and bluetooth wont start.. does that have anything to do with the other two dll's still being there or am i a booboo?
i mean, i totally removed ttn..
so now i'm totally stuck..
and how to make them work again under games
Pocket Mechanic will move them from device to storage card whilst still leaving the game installed.
Hi
Noob question: anymore details on how we can go about doing this by using pocket mechanic?
thanks in advance.
Pocket Mechanic ? is this the only way ?
Fame123 said:
Hi
Noob question: anymore details on how we can go about doing this by using pocket mechanic?
thanks in advance.
Click to expand...
Click to collapse
same question
I had this problem and just fixed it, didn't even use pocket mechanic
I have resco file explorer, all I simply did was move the games in the Gameloft folder on my device into Storage Card/Program Files/Gameloft
I then made copies of the shortcuts to the games and placed them in My Device/Windows/Start Menu/Programs/Games
And voila, it worked, and no reappearing of the huge gameloft files in My Device
Did it without resco and didn't work
rayad said:
I had this problem and just fixed it, didn't even use pocket mechanic
I have resco file explorer, all I simply did was move the games in the Gameloft folder on my device into Storage Card/Program Files/Gameloft
I then made copies of the shortcuts to the games and placed them in My Device/Windows/Start Menu/Programs/Games
And voila, it worked, and no reappearing of the huge gameloft files in My Device
Click to expand...
Click to collapse
i did the same thing only manually without resco , does it matter or should i try it with resco ?
rayad said:
I had this problem and just fixed it, didn't even use pocket mechanic
I have resco file explorer, all I simply did was move the games in the Gameloft folder on my device into Storage Card/Program Files/Gameloft
I then made copies of the shortcuts to the games and placed them in My Device/Windows/Start Menu/Programs/Games
And voila, it worked, and no reappearing of the huge gameloft files in My Device
Click to expand...
Click to collapse
This is right !
but t\and I have been doing so for ages BUT it just doesnt work for all ( like midnight pool for instance )
There are a lot of discussions about this ongoing out in the web. It does not work because of ONE file per game that cannot be run from SD.
jaguaralani said:
This is right !
but t\and I have been doing so for ages BUT it just doesnt work for all ( like midnight pool for instance )
Click to expand...
Click to collapse
Interesting, the games that I moved and worked included midnight pool 2.. (the games I moved were midnight pool 2, avatar and texas hold em poker)
Weird how it only works for some...
Maybe its differences in ROMs?
I am currently using the May 9th Energy ROM if that helps..
How to move the folders into the memory card with resco ?
jaguaralani said:
This is right !
but t\and I have been doing so for ages BUT it just doesnt work for all ( like midnight pool for instance )
Click to expand...
Click to collapse
How to move the folders into the memory card with resco ?
ive tried moving the games, and each time i move them, the games dont load, even when executing the direct .exe...
Help Please
i moved the folders into the memory card with resco and the games don't work
what to do ?
jordan45h said:
How to move the folders into the memory card with resco ?
Click to expand...
Click to collapse
Well first of all you have to have resco
Then open it up, and simply just navigate to required folders and you are able to do all the cut and pasting by touch =]
did it
rayad said:
Well first of all you have to have resco
Then open it up, and simply just navigate to required folders and you are able to do all the cut and pasting by touch =]
Click to expand...
Click to collapse
but the games wont load :-( , don't know what to do
I don't really know what to say, they load up for me, what exactly happens when uou try to open the games?
Anyone ?
did the moving folders helped someone or is it just me with the none working games
Nothing Happens
rayad said:
I don't really know what to say, they load up for me, what exactly happens when uou try to open the games?
Click to expand...
Click to collapse
i try to load the exe from the folder and nothing work only midnight pool 2 the only one that did work , am i doing something wrong ?
did u make sure you got the shortcuts right?
When you say nothing works, do you mean nothing happens at all, or does an error come up?
Nothing
rayad said:
did u make sure you got the shortcuts right?
When you say nothing works, do you mean nothing happens at all, or does an error come up?
Click to expand...
Click to collapse
Nothing happens and theres no error , and the shortcuts right
Some gameloft games can be installed / moved to storage card. Just recreate the shortcut using tool like total commander - cecmd
Asphalt 4
Chessmaster
Ferarri GT
Prince of Persia
Spiderman
Sonic
Bubble Bash 2
The rest require patching the main exe file &
removing reference to \Program Files\ &
hardcoding the \storage card\gameloft\gamepath
Assassins Creed 2
Asterix & obelix
Avatar
Brain Challange 3
Earthworm Jim
Hawx
Iron Man 2
Platinum Sudoku 2
Prince of Persia - The forgotten sands
Resident Evil
Roland-Garros 2009
Shrek Forever After
hey guys, i'v just got my phone back from htc after being repaired and im on with installing all my apps and games but im having a problem with a certain game. its need for speed shift, i cant steer my car due to having some resco products installed. i remember reading a thread on xda of a solution but cant find/remember how to do it. it involved dropping certain files from blah blah blah.........???, i just cant remember .
if anyone knows the score, please enlighten me, cheers.
ps: i was the person who sussed it was resco photo manager that clashed with the games steering, just thought i'd drop that in...
I've done so: installed resco in internal memory, then copied the directory in the storage card, uninstall resco from application manager then with total commander (for example) create a "link to" application in SD without reinstalling. After this nfs works fine
thats the one
horusgod said:
I've done so: installed resco in internal memory, then copied the directory in the storage card, uninstall resco from application manager then with total commander (for example) create a "link to" application in SD without reinstalling. After this nfs works fine
Click to expand...
Click to collapse
cheers buddy, thats exactly what i did last time, just totally forgot . anyway, thanks for helping out and from stopping me ripping my hair out
donwhann said:
hey guys, i'v just got my phone back from htc after being repaired and im on with installing all my apps and games but im having a problem with a certain game. its need for speed shift, i cant steer my car due to having some resco products installed. i remember reading a thread on xda of a solution but cant find/remember how to do it. it involved dropping certain files from blah blah blah.........???, i just cant remember .
if anyone knows the score, please enlighten me, cheers.
ps: i was the person who sussed it was resco photo manager that clashed with the games steering, just thought i'd drop that in...
Click to expand...
Click to collapse
it is very easy buddy, move the file to \Windows\smiSensorServer_1.dll from the Windows folder Resco Photo Manager and enjoy the game. Retrieved on 5.2.21916
yeah, that whole thread I think disappeared...
lapis21 said:
it is very easy buddy, move the file to \Windows\smiSensorServer_1.dll from the Windows folder Resco Photo Manager and enjoy the game. Retrieved on 5.2.21916
Click to expand...
Click to collapse
Can you just clarify this instruction please - move smiSensorServer_1.dll from where to where? I have looked in both Windows and Program Files>RescoPhotoManager and can't find this file?
Dunc001 said:
Can you just clarify this instruction please - move smiSensorServer_1.dll from where to where? I have looked in both Windows and Program Files>RescoPhotoManager and can't find this file?
Click to expand...
Click to collapse
sorry for my English
I wanted to say that you want to transfer a file from a folder SmiSensorServer_1.dll Windows, a folder with the program Resco Photo Manager
...\Windows\SmiSensorServer_1.dll -cut- ...\Resco Photo Manager\..
lapis21 said:
sorry for my English
I wanted to say that you want to transfer a file from a folder SmiSensorServer_1.dll Windows, a folder with the program Resco Photo Manager
...\Windows\SmiSensorServer_1.dll -cut- ...\Resco Photo Manager\..
Click to expand...
Click to collapse
Thanks. BTW - where did you find the Buff Resco Explorer skin?
Dunc001 said:
Thanks. BTW - where did you find the Buff Resco Explorer skin?
Click to expand...
Click to collapse
Skin Resco Buuf, enjoy
forum.xda-developers.com/showthread.php?t=521781