Database Info

Google Nexus One Pure Crystal Slip?

Anyone used this case? I REALLY don't want to put a case on my Nexus One, but it's also so slim and thin that I am going to drop it eventually.
Silly as it is, I don't want the whole phone covered up, so while the Innocase Surface II looks decent it also covers up the phone.. The Boxwave Pure Crystal Slip doesn't, but I can't find any reviews on it.
Anyone used one of these things? I don't use the dock, although I do use a horizontal belt case so I might have to get one that's slightly bigger as the N1 barely fits in the existing one, but I can deal with that.. That would happen for any case honestly, except for a skin.. I do like Best Skin Ever, but the last two I've bought seem to not be quite as "tacky" as the first few I had, therefore the grip wasn't quite as good. Maybe my imagination..

I bought the Boxwave case off amazon a month ago probably. its a nice case but save your money and buy a resin case from dcmugen on ebay, exact same thing with a different logo. its a nice case though, not too thick and easy to take on and off (I use both docks) so it fits my needs quite well.

Boxwave here. Nice thin and classy. Has rubber feel but not too soft either. It's a pretty good case makes phone look ten times better in my opinion. Is easily recommend it, but I don't use docks, so can't help there. Never the less, happy casing.

DC Mugen FTW. eBay - Epik Case. I got two cases for $8 including shipping and two screen protectors.

check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)

stiCk.E said:
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
Click to expand...
Click to collapse
Ah, I see.. I still think I prefer the Pure, no patterns on it, but otherwise the same.. Looks like Boxwave has the Cyclone (circle patterns), diamonds, a matte finish, some others..
Still haven't decided on which case.... I've always been disappointed in silicone cases, but I've almost always bought cheap $2 eBay ones..

I went with the Boxwave Pure Crystal Slip, we'll see when it arrives! God knows when, I had two shipping options.. 5-10 days ($2) or 1-3 days ($23!!)
So I'll see in 5-10 days

I got the Clear Pure Crystal Slip yesterday. Here's a quick review:
Overall, I like it and will likely use it when I'm out and about. It gives a much more secure grip on the phone without adding any weight or feeling larger. Although honestly I still think the Nexus One is a little TOO thin and a little slippery. This makes that better.
It feels like a cheap case, it's rubbery and smooth. If your hands are wet or oily it might be MORE slippery, don't know yet. In reality it seems pretty well made, and fits well. The Clear Pure version is crystal clear, no tint, no patterns, and you can clearly see the phone is a Nexus One.
I'm not doing any drop testing, but I think if the phone landed on a corner or an end this case could protect it. It's firm but pliable, not squishy like a silicone case and not a hard case. Primarily I think it'll protect it because it'll be LESS LIKELY to get dropped because the surface is a tackier and more surface area on the sides. I can pick up the phone with two fingers securely now, where before I'd have to tilt the phone up and get fingers under it to pick it up.
If anyone wants pictures I can do that, haven't yet...
Price summary: If it were $15 it'd be a deal. $20 seems too much.
Pros:
You can see see it's a Nexus. Google branding, colors, body build
It's thin, firm, and fits tightly
Covers up the power and volume buttons, but made to fit over them. Maybe a little rain resistance?
Adds better grip, more confidence holding the phone
Does not interfere with any ports (except a little on the power plug, see below)
Does not interfere with any openings (speaker, mics, camera, camera flash)
Does not interfere with the screen, particularly near the edges
Does not obscure the speaker when phone is on its back
Lets you lay the phone down face-down without resting on the trackball
Covers all corners, edges, entire back.
Cons:
It has a molding line all around it.. It's not that visible but you can feel it. Sides aren't smooth
Covers up the power and volume buttons, but made to fit over them. Makes it too easy to hit the buttons, and you can't feel the button very well (to feel it when touching) nor feel the action of the button itself.
Seems to make the stock charger plug (maybe others too) not feel "in", I think there's too much material around the plug
Takes away the nice texture and feel of the Nexus One
Thumb hits the case a little scrolling down on the trackball, but it doesn't make it harder to use
Other notes:
Does not protect the camera lens or the screen at all
Mine was clearly used, fingerprints all over and in the box backwards :/
A slim belt case intended for the N1 is too small to fit with this case
There is a weird cutout to the left of the HTC logo in the case, like maybe a hand strap could go there?

akifbayram said:
That case does look nice but 20 dollars seems a bit excessive. Look at other Amazon items. I found one for 5 dollars shipped that is pretty similar and doesn't have the hole in the back. http://www.amazon.com/Google-Crysta...X1DSC0SAJ94E&s=generic&qid=1275242975&sr=1-27
Click to expand...
Click to collapse
I have that case as well as the Crystal Boxwave slip.
The Boxwave one:
- Is clearer obviously (not the "smoked look").
- Fits a good deal tighter.
- Has a full cover for the lip, not the chin strap method of attaching.
- Has Boxwave written across the back.
I actually prefer the patterned one because it's more interesting, both detract from the Nexus, so it might as well add some flavor, right? The Boxwave one is far tighter fitting (and slightly thinner) but neither is going to come off in any kind of normal use. I also own the desktop dock, so I need to take it off on occasion to allow the phone to fit. Both cover all the buttons, so you have to get used to pressing them through the rubber. They also both have that edge around the edge of the case from being molded.
Anywho, just my $0.02

akifbayram said:
Speaking of 2 cents...there are a lot of auctions for the patterned Nexus One cases for 99 cents. http://stores.ebay.com/Cimo-Cases_G...15QQ_sidZ192097565QQ_trksidZp4634Q2ec0Q2em322 I wish I knew about this before
Click to expand...
Click to collapse
And those are probably worth at least $1.10...... Sometimes you really have to make a minimal investment to get something useful.

Solution for battery cover?

I am absolutely loving my Fascinate (rooted, lag fixed, and de-Binged of course). Awesome upgrade from my Droid Eris! However, I have one major gripe with it so far, and that's the battery cover, or back plate, whatever you wanna call it. I am definitely not a fan of the glossy finish on it. If my fingers are the least bit wet or greasy, it makes it very hard to hold onto. The battery cover on my Eris had some kind of slightly rubberized matte finish, and I never, ever had trouble holding onto that phone.
So, I'm looking for a solution. Ideally, it would be in the form of a direct replacement for the OEM battery cover that is made of the grippy material like the Eris had, but I might settle for some kind of stick-on skin, if there's a good one that will eliminate the slipperiness. I've searched a bit, but haven't found any good solutions yet. Anyone suggestions would be appreciated. Oh, but please don't suggest cases of any kind. I have a good leather belt holster already that the phone fits in perfectly, and adding a wraparound case of any kind would be redundant, and also would prevent the phone from fitting in my current case.

Actually, I think I found a solution, thanks to a thread on the Android Central forums. Stealth Guards is apparently giving away all their screen protectors away for free for a limited time. You pay only the cost of shipping, which for me was $2.85, and the protector was originally $14.99. It's actually a full body protection skin, not just a basic screen protector. I'll probably just use the part for the back, and not mess with the front screen protector part at all. Here's the link:
http://www.stealthguards.com/index.php/cellphones/samsung-fascinate-full-body-protection.html
Note that they have free protector kits for most all the popular phones available right now, and if you like their Facebook page, you could win prizes (such as iTunes or Best Buy gift cards) on the way to 1000 likes, and after they top 1000, they'll hold a drawing to give away a new 6th-gen iPod Nano.

ivorycruncher said:
Actually, I think I found a solution, thanks to a thread on the Android Central forums. Stealth Guards is apparently giving away all their screen protectors away for free for a limited time. You pay only the cost of shipping, which for me was $2.85, and the protector was originally $14.99. It's actually a full body protection skin, not just a basic screen protector. I'll probably just use the part for the back, and not mess with the front screen protector part at all. Here's the link:
http://www.stealthguards.com/index.php/cellphones/samsung-fascinate-full-body-protection.html
Note that they have free protector kits for most all the popular phones available right now, and if you like their Facebook page, you could win prizes (such as iTunes or Best Buy gift cards) on the way to 1000 likes, and after they top 1000, they'll hold a drawing to give away a new 6th-gen iPod Nano.
Click to expand...
Click to collapse
THANKS!!! Just ordered one for me and one for my girlfriend... I didn't want to add a case, but this will keep our phones looking fancy!

hey this looks really cool. can you let us know how this works out after you get it? i was just at the bar the other day (you know how when ur holdin a cold beer and ur hands get wet) i was like god this phone is slippery

I got full body invisible shield.
I removed the SP and got realook because i didn't like the rubber feel on the screen.
But i left the back piece on it makes the back feel allot better and gives it a kind of rubbery feel and reduces finger prints and also helps protect from scratches
It and makes the over all phone feel solid.

Thanks for the link. Picked up 2 of these for my phone.

Thanks for the link too, got one for me and two coworkers. Hell of a deal even if it's mostly crap. I just want it forthe back cover too. Way too slippery.
I'd like it if Seidio's innocase for this phone just protected the back/sides and left the front alone. I like the soft touch on those...
Even my HTC TP2 had a soft tough battery door stock.

Oh dang, I forgot to reply back to this. I got my Stealth Guard as expected (just an envelope in the mail, almost thought it was junk mail at first). Sadly, there NO instructions (except for a YouTube video on their website, which was a joke), but after digging up some info online, I washed and dried the battery cover, sprayed it with some slightly soapy water, and applied the skin. I rubbed out most of the bubbles fairly easily, and as others have said, after 2-3 days, all remaining bubbles and odd-looking film went away, and if not for the ridge at the edge of the skin, you wouldn't know it was on there. Oh, I did have a bit of trouble getting the corners to stick down to the curved corners of the battery cover, but I kept working on them, and they did eventually stick as the water started to dry up a little. So far there's no evidence of peeling or anything.
I do have to admit that it's not as grippy as I expected, but it is some better than the bare surface, and should prevent the back from getting scratched up, which I was starting to see evidence of, even with careful treatment of the device. I'm undecided if I'll ever apply the front piece or not at this point, but seeing how clearly the back piece applied, I wouldn't expect it to affect visibility at all.
I ordered another one of these for my brother-in-law's Droid Incredible, and would recommend them to anyone else as well, unless you want to try a different brand, in the hopes of getting an even grippier surface for the back side. But I think that for a mere $2.85, you really can't find a better deal anywhere.
Sent from my SCH-I500 using XDA App

Well, I ordered the Verizon / OEM, "kickstand" hard case in hopes of a good solution for the slippery back. Looks like this case only covers the back and sides of the phone and leaves the front untouched which is what I wanted as far as a case, and it looks quite thin too. Plus, it has a kickstand built in which I really wanted since my TP2 had a sliding/tilting screen. The back of this case is grooved with like a patchwork pattern so I'm sure it's a lot grippier.
Verizon wants $20 for them, but I got it for $10 including shipping on eBay! I'll post back how it is when I get it, but I think it's the best solution i've seen.

Have the kickstand case & it's pretty good. It also has 4 raised "feet" at the corners on the back which give it some speaker clearence when flat & act as friction points for your hand or loose pocket. The kickstand is a good alternative for a desk cradle & makes utilizing the alarm clock easier.
Sent from my SCH-I500 using XDA App

Bulky cases like that don't work for me. I use a belt holster case that I picked up from Best Buy, and any other protector case would make it bulky to put into the holster. That's why this stick-on protector was attractive to me, as it adds no unnecessary bulk. But that's just my preference. If you prefer a hard case, you'll get no argument from me.
Sent from my SCH-I500 using XDA App

I just ordered 3 brand new covers directly from VZ...They are only $3 bux each...Ill just replace them when needed.

suzook said:
I just ordered 3 brand new covers directly from VZ...They are only $3 bux each...Ill just replace them when needed.
Click to expand...
Click to collapse
I'd do that if they made some with a matte finish.. Where did you order them from? Just curious..

tcub said:
I'd do that if they made some with a matte finish.. Where did you order them from? Just curious..
Click to expand...
Click to collapse
Directly from the VZ site....I am gonna experiment with one...Im looking for a sort of rubber spray paint...If i can find one im gonna spray it.

Maybe with the white fascinate coming out at best buy I can buy the white back. Looks nice.

Ok, got the OEM/Verizon Kickstand case in and the $2 Stealth Guards films. The kickstand case is THE solution for the battery door IMHO, but I got both mainly for this reason. Mini review of each:
The Kickstand case, I got from eBay, for $11 shipped w/ tax (just search for "fascinate kickstand"), which is half off the in store price you'll find. It is THE solution to the slippery battery door IMHO, and the best case out there right now. The case has a slight rubberized / soft touch finish, and has a grip pattern in it, which makes it much easier to hold onto. It's quite thin, except for a bump caused by the kickstand, which is leveled so the phone lays flat, by some "feet" on the back. That slight bump I actually like, because I can easily tell which way the phone is oriented in my hand without looking at it. It provides nice protection to the sides and corners and back, so I think it will provide added drop protection. It fits very tight, I wouldn't expect it to come off ever. What I really like, is that it barely protrudes above the front of the phone at all, it adds a very slight lip at the sides, and that's it. This keeps the phone quite flat/thin still and doesn't change how you'd interact with the screen at all. The slight lip should help protect the screen though. All the cutouts are excellent in positioning, and provide nice "cover" for the side buttons against accidental actuation.
Probably the nicest thing of all which I didn't expect, is that the Kickstand works in both Portrait with the phone vertical, and horizontal in landscape, due to the way they positioned the kickstand on the back. It works great - this takes care of one of the things I missed from my Touch Pro2 (the tilting screen). It also has a tensioner, which allows you to tweak the angle in horizontal/landscape a bit because it's "stiff". For the $11 I paid for it, it's worth every penny and seems quite solid/well engineered for the price.
Only downside I see is that it's a bit tougher to take the battery out of course..
The Stealth Guards films are better than nothing, but not much grippier than stock. They come with just two films, front and back. Application and clarity is similar to other "invisible shield" type products. Not a very good screen protector (orange peel, tiny bubbles, not crystal clear), Steinheil is WAY better, but they don't have them yet for our phones so I'll use this in the mean time. Also, they cover the light/prox sensor at the top of the phone, which I found made the automatic backlight adjustment sorta freak out and switch more often than it should (probably because the protector is relatively thick and not crystal clear) - I cut a tiny window out around them with a razor blade and that fixed the issue. They shipped in an envelope, inside another envelope, I ordered 3 sets for myself and friends, and every one came with wrinkling/damage. Fortunately the films are very durable so the films themselves were unharmed - it was the paper backing that was wrinkled. Still, they could of reinforced the envelope with a little cardboard.... Also they come with no instructions or packing at all, just bulk/oem packed. Still, for $2 they were worth it, but not worth much more than that.

suzook said:
I just ordered 3 brand new covers directly from VZ...They are only $3 bux each...Ill just replace them when needed.
Click to expand...
Click to collapse
How did you get them for $3? It says they are $5.

Epic 4g case.!!!

what is the best epic 4g case? post yours...

I bought the Black Samsung one from the Sprint store for $19.99. It works great and does what I want.
Yeah, I know. I'm boring

TheCraigJ said:
I bought the Black Samsung one from the Sprint store for $19.99. It works great and does what I want.
Yeah, I know. I'm boring
Click to expand...
Click to collapse
haha the sprint cases are fin & your not boring..

I'm using the Seidio Innocase Surface case/holster combo. Nice tactile feel on the case, and the secure spring-clip holster does really well, especially with my clumsy arse...
Sent from my SPH-D700 using XDA App

Definition of the "best" case would be different for every person because it depends on personal preferences, how you use your phone, and how you carry it. Personally, I like the feeling of a naked phone and with my Touch Pro 2 I mostly used Forte leather case (although I tried Seidio Surface for a short period). The advantage of a leather pouch is that you don't have any permanent thickness added to your phone, but disadvantages are that you need to take the phone out of the case to see the screen and you can still drop the phone while out of the case - which is exactly what happened to me a few times. Now when I got Epic, it is thinner then TP2 so I wanted to get a snap-on case for it. Here is my mini-review of a few cases I tried:
1) Seidio Active - it is the case that (among other snap on cases) would definitely provide the best protection if the phone is dropped, it looks good, and made well. The soft gel provides a nice cushion and the plastic skeleton strategically positions hard coverage over areas that could be most impacted during the fall. It seems that the recently found Fishbone case on Amazon is very similar in the design so I would expect it to provide the same protection. Unfortunately, Seidio Active was a bit too thick to my liking and since I usualy take good care of my phones, I didn't feel that the extra protection would justify the added thickness for my needs.
2) Seidio Surface - this is probably the thinnest snap on case you can get. I really like the fact that it adds very little to the overall size of the phone and I thought that it would be the perfect case for me when I bought it and put it on. However, maybe the fact that it is so thin contributed to the fact that it feels a bit flimsy when on the phone. There is a tiny bit of play on both the top and bottom parts (when you squeeze them with your fingers on the sides) and sometimes when you push power button the phone tends to slide open a bit based on how I hold it in my hand. The case seems to fit like a glove but it is not as tight as I would like it to be and it is VERY easy to remove the top part with almost no effort whatsoever. Some may consider it a plus, but I consider it a minus because I am pretty sure that if the phone is dropped, the top part will most likely fall off after the first bump leaving the top unprotected (this actually did happen when I used Seidio Surface case on my Touch Pro 2 and dropped from about 3 feet onto hardwood floor).
3) Sprint Case with rubber back - to me this turned out to be the "best" case, at least for now. In terms of added thickness it is somewhere in between Seidio Active and Surface cases. It fits very snug and tight. I like the rubber backing a lot, it is not slippery, feels very nice in hand, and looks good (at least in black). Some people mentioned that the rubber has a tendency to peel off - I've had this case for a month now and it looks like new and I have no peeling issues; but even if I do, I am sure that a carefully placed drop of crazy glue will take care of this issue permanently. I have removed the case several times and I don't see any scratches left on the phone as was posted in one thread. The only drawback may be that the case is a bit harder to remove then Seidio, but to me it is not an issue and means that it will stay on during the fall. I rarely remove the top part, but I am a heavy phone user so I swap extra battery often and don't have any issues removing the bottom part after getting used to it. There were some reports of snaps breaking off - I have not experience that at all and I hope I won't since this is a perfect case for me at this point.
In terms of price - all three cases are around $20 bucks so price is not a factor. All three cases do not interfere with the sliding mechanism and make the phone feel a bit tighter with less screen play and no more squeaking from the battery door. I also tried one of those invisible shield things which is basically a screen protector over the entire phone. Two issues I found with those: a) no matter what brand you get, they will eventually start peeling and will attract dirt on the edges looking like crap after a while; b) although they provide scratch protection, they won't do much if the phone is dropped.
Hope you'll find your best case.
Cheers.

My sprint case has all the tab breaking off after about a month and a half of use. YMMV.

Geekybiker said:
My sprint case has all the tab breaking off after about a month and a half of use. YMMV.
Click to expand...
Click to collapse
I wonder if this has to do with how different people remove/put it on. I usualy pick the two corner clips on the charger side with my nail and it removes pretty easily after that (just slide it off). When I put it back I do it in reverse order - I slide the bottom two clips on first and then snap the top ones on. So far it's been working well for me.

I'm using a black Seidio Innocase (regular not active) with the spring clip holster and I love it. I originally had the body glove case and it was just too big.. felt like I was carrying a brick in my pocket. The Innocase doesn't add much bulk and gives a bit of protection from random bumps and scratches. Has a pleasant lip around the screen too so laying the epic flat on its face keeps the screen from contacting a surface.
Sent from my SPH-D700 using XDA App

My experience with case durability is completely different from gorby911's, so it's all YMMV. My Sprint case completely fell apart in 1.5 months of use, what with the clips breaking off, and 2 corners of the rubber backing peeling away. Even after Gorilla-gluing one of the corners, it peeled off again within a week! Just got a Seidio Surface and it fits very snugly and no play.
The downside of the Surface is that its rubberized texture is actually quite slippery, vs. the grippy texture on the Sprint case (especially with its rubber backing). It slightly twists and slips around in my hand that supports it while I'm swiping around with my other hand. But it's got a much thinner profile with what I feel appears to be the same amount of protection.
I hope it lasts more than 1.5 months long.

So the sedio active is the slimmest case? May have to check that out, thanks for the info.

ranchosteve said:
So the sedio active is the slimmest case? May have to check that out, thanks for the info.
Click to expand...
Click to collapse
Seidio innocase should be the thinnest.

I've been using the BodyGlove that has a the smoked chrome. Stylish and strong. Dropped it a few times and everything's still fine. Sprint Direct/Indirect stores have them available.

gorby911 said:
I wonder if this has to do with how different people remove/put it on. I usualy pick the two corner clips on the charger side with my nail and it removes pretty easily after that (just slide it off). When I put it back I do it in reverse order - I slide the bottom two clips on first and then snap the top ones on. So far it's been working well for me.
Click to expand...
Click to collapse
I have both the Innocase Surface and the black Sprint case and I too have had no problems with my Sprint case - I take off the back of the case exactly as you have described. Not a single scratch on my phone yet (knock on wood). I prefer the Sprint case over the Innocase as it seems to offer better protection.
For those who are curious, the black Sprint case fits in the Seidio Innocase Holster (the one designed for the Innocase Surface at least). I bought the $40 Innocase/holster combo at Best Buy, but am using the holster with my Sprint case.

I'm using this one. Got it off fleabay for $8.99. Really nice OEM leather case that fits great. I can't stand a phone in my pocket so I have mine on my belt.

Case Review: Cruzer Lite Androidified TPU Case

Hey guys, just got some awesome looking Android cases, so just wanted to share my impressions. I actually haven't seen any companies make a case like this yet, so I thought it was pretty cool.
First off, these cases look outstanding. The Andy the Android graphics on the case are really slick and give the phone a very stylish look. It's a bit more subtle on the smoke colored case, but it definitely pops on the blue case.
I previously owned a generic black TPU that had straggly edges, uneven cutouts, and inconsistent molding. Compared to this case, the Androidified case is noticeable cleaner. The Androidified case is cleanly cut, and has a consistent smooth molding. It's also tight and form fitting, which makes it bit hard to put it on the first time. But once you get it on, you can see that it conforms to the phone perfectly. The inside edges are a bit sharp, but I think it helps the case lay flat on the surface of the phone.
As far as protection goes, it's pretty much the same as other TPU cases go. It provides great protection against everyday scratches and small drops without adding a lot of bulk to the phone. I accidentally dropped my phone from my desk a few days ago without any scratches or cracks. The case also rises above the screen so that if you were to put it face down, the screen would be elevated from the surface.
There are cutouts for the micro-usb port, microphone, headphone jack, hdmi port, speaker, and camera. The power button and the volume rocker are covered, but have a button on the outside and is indented on the inside for easy access. This was actually a source of frustration for me on the generic TPU case, the button on the outside wasn't well defined and was hard to find at times. Along with a poorly finished side, there were times where I would mistake an unfinished edge for the power button. Thankfully, the smooth finish of the Androidified cases make this a non-issue.
Overall, I'd recommend these cases if you're looking for a stylish protective case that won't add much bulk to your phone. For $12.99, they are cheaper than the ones you'll find at Verizon, so I think it's definitely worth it. I got these at Amazon (my review is there too).
I also attached pictures of the smoke and blue Androidified cases vs the black generic TPU cases.

These cases are definitely great! the owner of the andriodify cases is a stand up guy who's all about introducing stylish quality produces at an afforable price.

Does this case have a cutout for the secondary microphone on the top? I really hope not because then I'll need to cut a tiny hole in the top of my case(already ordered one) :[

blarrick said:
Does this case have a cutout for the secondary microphone on the top? I really hope not because then I'll need to cut a tiny hole in the top of my case(already ordered one) :[
Click to expand...
Click to collapse
Did you mean you really hope so?
My bad though, I had a bunch of pictures, but I must have not uploaded one with the top view. Yes there is a cutout for the mic on the top.

immaage said:
Did you mean you really hope so?
My bad though, I had a bunch of pictures, but I must have not uploaded one with the top view. Yes there is a cutout for the mic on the top.
Click to expand...
Click to collapse
Lol yes that's what I meant, and thanks a lot that relieved my only worries about this case :]

Case Problems...
The Case is all right but the one from Verizon fits better and the buttons are easy to press. With this case the camera doesn't line up and it is terribly hard to press the volume rocker and power button...very depressing as I love the style of the case.

Boomwaller said:
The Case is all right but the one from Verizon fits better and the buttons are easy to press. With this case the camera doesn't line up and it is terribly hard to press the volume rocker and power button...very depressing as I love the style of the case.
Click to expand...
Click to collapse
I haven't received mine yet but if it's that bad I'll probably end up cutting them out myself, sure it's not going to look incredible but everything else about this case seems great, not sure why they'd ever think covering the power/volume buttons would be a good idea...

Agreed
blarrick said:
I haven't received mine yet but if it's that bad I'll probably end up cutting them out myself, sure it's not going to look incredible but everything else about this case seems great, not sure why they'd ever think covering the power/volume buttons would be a good idea...
Click to expand...
Click to collapse
Yea that's what I ended up doing was cutting them out it looks great other then my craftsmen skills lol, but it works a whole lot better now.

I'll be doing my own review of these cases too...maybe not on xda, as there is one already. As far as the buttons on the side are concerned, I did notice that they were a little hard to press at first. However, after using the case for more than a week or so the buttons are much easier to press; I guess they just had to be broken down some. I bought both the green and the smoke one, and they are both great!

The graphics on these are pretty nice...

I got one of these as well.
Yeah, the side buttons are a bit hard to press, but it gets easier with practice and the case seems to break in a bit as well over time. The first time I put it on it wasn't aligned properly, but every time I've taken it off and put it on since then it seems to get a little better.
My only real complaint is that a) it doesn't fit in the media dock, and b) when I take the case off to put the phone in the media dock it often pulls the plastic back off with it (I just need to be more careful in the future).

Coming from one of the generic TPU cases that I purchased on ebay, the covered buttons on the Androidified case was much better and easy to press.
In regards to the media dock, that must apply to cases in general right? I can't really see it fitting on a media dock if you have a case on it.

Yeah, correct. No case will fit in the dock.

no link to where to buy these from...?

frogdod said:
no link to where to buy these from...?
Click to expand...
Click to collapse
You can find them by searching androidified on amazon

I got the red one with argyle pattern. It is a PITA to push the power and the volume buttons. So I guess not all TPU cases are made equal. I ended up cutting a cutout around the power button. Problem solved. And also around the USB port since some of the generic charger connectors that I have are too big to fit through the USB cutout on the case.
That being said, the Curzer Lite TPU case that you have, is it the same as the one that Verizon has in their stores? I think somebody wrote the Verizon's Charge TPU case has the best power button cover (and I can almost vouch for that having had Verizon's TPU case on my Droid X) but I'm not positive.

I have the Cruzerlite Androidified case and it is almost the same as the Verizon one but it has the android pattern. Cruzerlite also makes the Argyle pattern and they are about half the cost of the Verizon OEM ones

It's a decent case...good protection from small drops and looks fairly cool. I can't get the top around the screen to stay uniform, so the fit could be better. I'll give it a 4/5 and 4.5/5 on value. I'll be waiting on the Case-Mate Barely There!

Not diggin this case anymore. Hard to get off without batt door coming with it. Much sleeker without the extra size...hoping casemate puts out a barely there soon.
If anyone wants it...$10 paypal gets it shipped to your door. (Blue as pictured above)

The PureGear DualTek case is awesome!!

If anyone is looking for that case that gives you the protection, in a thin profile. I have had just about every case out for this phone and this is the first one I bought and the one I have gone back to every time is the dualtek. Check out youtube videos of it. You can get the case for around 20.00 and I promise you will not be disappointed, this is definitely different from the version for the galaxy s3. I have the yellow one, and love the color, thinking about the black and white one next, hoping they come out with more colors. The plastic is a grippy, not slick plastic. Extrememly well made

I had one for my s3 then found the black cushion inside the case that touches the back cover left an imprint on my s3 I when the phone got hot and I couldn't get it off and I had to buy a new back cover and puregear sent me a new case but I sold it. I bought the yellow one for my s4 and it started leaving a little imprint also and it was a little too bulky and the buttons weren't as easy press as my uag case so I sold it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

mine should be arriving on Tuesday. from Amazon. the case had mostly 5 star reviews. they did note the buttons were hard to press. if you look at the customer images, one customer shows how he cut a slit on the bottom of each button area in the case, and now has tactile and excellent buttons. i am probably going to try that on mine and will report back.

rjw252 said:
If anyone is looking for that case that gives you the protection, in a thin profile. I have had just about every case out for this phone and this is the first one I bought and the one I have gone back to every time is the dualtek. Check out youtube videos of it. You can get the case for around 20.00 and I promise you will not be disappointed, this is definitely different from the version for the galaxy s3. I have the yellow one, and love the color, thinking about the black and white one next, hoping they come out with more colors. The plastic is a grippy, not slick plastic. Extrememly well made
Click to expand...
Click to collapse
I bought the case, but found my SkullCandy headphone jack won't fit through the opening. Yes, I can drill it out, but I notice in a number of online reviews this is noted as a problem to be aware of.

this case is very solid feeling. i was worried about the headphone jack but my 90 degree plug for my Ultimate Ears Triple.Fi's fits in beautifully.
i can confirm the power button is indeed a bit too hard to press and squishy. however the mod that an amazon reviewer posted does work. cut a slit in the rubber on the bottom of the power button and it is now much easier to press and tactile. very cool. the phone is a bit hard to get out but it is very very secure in case of a fall. great lip to protect the front, and this case inspires confidence. sides are grippy. only flaw is that the back of the cover is not grippy. i like that when i put it on smooth surfaces a case has grip on the back.
phones in this thing survived multiple 22ft drop tests on youtube and now i know why. it's built very well.