So yesterday i flashed Cognition 2.2 Beta 6 on my Cappy, and then a friend flashed 2.1 Voodoo. So now i have Ryan's OCLF running and Voodoo 2.1. Whenever i start my phone up it just goes straight to recovery mode, then when i click reboot now it still goes to recovery. Tried using the 1 Click Return to Stock thing but my phone doesn't go into Download mode either. People this is my only phone... Please help... Oh and if you can't help me do you guys think ATT will return my phone?
timur525 said:
So yesterday i flashed Cognition 2.2 Beta 6 on my Cappy, and then a friend flashed 2.1 Voodoo. So now i have Ryan's OCLF running and Voodoo 2.1. Whenever i start my phone up it just goes straight to recovery mode, then when i click reboot now it still goes to recovery. Tried using the 1 Click Return to Stock thing but my phone doesn't go into Download mode either. People this is my only phone... Please help... Oh and if you can't help me do you guys think ATT will return my phone?
Click to expand...
Click to collapse
while in recovery, your phone will still respond to adb. simply "adb reboot download" will get you there.
NEVER EVER flash a 2.1 kernel when you a running a 2.2 firmware.
Where do i download ADB? and how exactly do i use this command line?
It's part of the Android SDK.
h t t p://developer.android.com/sdk/index.html (take the spaces out, I can't link yet).
You install the software, connect your phone by USB, open a command prompt, CD to <install folder>\tools, then type "adb reboot download".
If you can't get ADB to work.. you might want to try this trick,
Pull your Battery, Sim, External SDCard.
Hold down both Volume Buttons at the same time.
While holding down the button - put in your USB Cable
Jam the battery back in and the yellow triangle "should" pop-up.
Might take a few times to do it, but if you have your buddy with you (you know the guy who tried bricking your phone?) it should go into d/l mode.
timur525 said:
So yesterday i flashed Cognition 2.2 Beta 6 on my Cappy, and then a friend flashed 2.1 Voodoo. So now i have Ryan's OCLF running and Voodoo 2.1. Whenever i start my phone up it just goes straight to recovery mode, then when i click reboot now it still goes to recovery. Tried using the 1 Click Return to Stock thing but my phone doesn't go into Download mode either. People this is my only phone... Please help... Oh and if you can't help me do you guys think ATT will return my phone?
Click to expand...
Click to collapse
I don't think AT&T would replace your phone because you messed up flashing it. This voids your warranty.
There are a few ways to force download mode. Try avgjoegeek's method, it should work.
If the 3-button method doesn't work, you may be SOL. I had to return my phone that did not allow the 3-button method to work. It is a pretty common issue. Everyone should check to make sure their phone will go into recovery and download mode before flashing ROMs. This issue should be stated more in the ROM sections.
Good luck!
Related
My phone will not turn on. I was doing a factory reset, but it seemed to freeze, so I did a battery pull. Now my phone is either stuck on the samsung logo, or an empty batter symbol with a white circle. Please help.
Only thing I can think of is to try to get into download mode (remove the battery, plug the phone into a computer, and press the volume down button). If you can get to download mode, you should be able to flash a stock rom via Odin (instructions for this can be found in multiple threads on this forum.
Sent from my voodoo froyo Mesmerize
Mesmerizeuser said:
Only thing I can think of is to try to get into download mode (remove the battery, plug the phone into a computer, and press the volume down button). If you can get to download mode, you should be able to flash a stock rom via Odin (instructions for this can be found in multiple threads on this forum.
Sent from my voodoo froyo Mesmerize
Click to expand...
Click to collapse
Yes, do that.
download odin and the stock 2.1 build. then place your phone in download mode. flash the rom the way the instructions tell you too. then walk into your local uscell and complain til they give you a new mesmerize. that should solve all your probs
Got mine to reboot
i got my samsung mesmerize to turn on by pressing in the startup button on the right AND the volume control button on the left (up, don't know if that matters) at the same time for a few seconds (at least 5) and eventually the SAMSUNG logo appeared and it is now working fine.
I hope this helps anyone who has the same issue!
lately EVERY time i reboot my phone (running ics build 2, 3 and 4, stock kernel) it gets stuck on samsung logo.. somehow my phone will only boot into the frigging cm7 recovery which as im sure youre all aware is rather useless to fix any problems im having in ics and leaves me unable to flash, backup, or restore anything. it's quite frustrating and i have no idea how to fix it but by going back to bml, re-partitioning, then odin ei20 modem, cm7 fixed recovery, then flash back to ics but doin this every reboot it getting very tedious..
ive read about recovery loops, but the fix doesnt work for me as i cant mount the ICS /system partition in cm7 recovery...and ive been all over trying a zillion things to get it to work and havent pulled dmesg or logcat but if someone thinks it would be useful ..i wish i knew why EVERYTHING is great, then BANG, reboot and it's FML city.
This is for the people who got a new captivate through return or purchase or how ever you obtained it. If you tried flashing a new rom and now are stuck at the att boot loop or the battery loop and your phone will not boot up here is help.
1. See if your phone will do the 3 button recovery to get into download mode.
2. If you cant get into download mode you might need a Jig or do the resistor technique to get into download mode.
3. See if this odin (I897UCJF6-final-OCD-REV0.exe) will flash your phone back to the stock 2.1.
4. If after flashing the 2.1 odin and your phone still has boot loop then try the 2.2 stock odin
5. Next do the same as previous but try with this odin (I897UCJI6-OCD-REV02-Low-designgears_1_.exe) which is the 2.2 stock odin.
Note all of these flashes require you to be in download mode and have odin fired up on your pc the plug in your phone so odin can recognize it so
a. be in download mode (not connected to PC)
b. have odin open on pc
c. Plug in phone to pc and start odin.
odin likes to stop flashing when setting pit file so if it freezes give a sec and if nothing try it again.
if odin freezes on the set pit file your phone will have the dreaded phone to pc icon during boot but dont panic set your phone into download mode and try again.
If any questions should arise PM me or leave a comment and others and i will try and help.
Took me two days to fix my phone after flashing to stock to root it but i hope this helps you turn your 400 dollar paper weight back into a phone.
umm thanks but we know how to use odin there are a million guides in every ginerflash and captivate sticky.
and the 2.2 odin is actually an internal samsung beta 2.2 not official.
returning it with the designgears 2.2 will be an obvious warranty breach if they notice.
and your Step 4 and 5 seem to say the same thing... "flash 2.2 odin" (which isnt official)
and THE REAL FIX FOR THE BOOTLOOP:
reboot into RECOVERY > (not download)
wipe cache and data! (or factory reset)...
DONE!
reboot into the rom that you were trying to use!
takes 20 seconds and no reflashing anything.
i ran into this a few days ago while trying to root a friends captivate(1008) purchased from walmart recently. after trying to flash back to stock i was stuck on att boot loop and could not get into download mode via button combo to save my life. tried everthing minus a jig....after getting fed up with it, i sat it aside. to my amazment, after about 10-15 minutes the mf booted up. i had to use adb to reboot into download mode. flashed with odin(from aio toolkit) back to 2.1. everything worked fine, no problems except for one thing...sometimes it will still loop for a few minutes before it boots...sometimes it boots right away. Im still investigating the whole ordeal but my point here is: if you think your phone is stuck on att screen, just let it sit for a while....maybe a long while. and it should boot. then use adb to get back to download mode. i read every forum post on the web about this issue...just found this thread and thought id give ppl a heads up. hope it helps
I'm stuck in a bootloop right now on the Galaxy S animation screen and this wipe cache and data method doesn't seem to work for me.
so i recently tried flashing a darky rom theme onto my captivate running mosaic 8.
it worked the first time. then i tried another theme didnt like it, so flashed the darky rom one, and now, bootloop....
i can get my cappy into download mode, but odin doesn't recognize it.
i cannot get it into recovery mode with holding down the volume up and down and power button.
i need help
--edit--
fixed!
biggest help i have EVER had in custom roms/rooting etc..
http://forum.xda-developers.com/showthread.php?t=1351224
TRusselo said:
umm thanks but we know how to use odin there are a million guides in every ginerflash and captivate sticky.
and the 2.2 odin is actually an internal samsung beta 2.2 not official.
returning it with the designgears 2.2 will be an obvious warranty breach if they notice.
and your Step 4 and 5 seem to say the same thing... "flash 2.2 odin" (which isnt official)
and THE REAL FIX FOR THE BOOTLOOP:
reboot into RECOVERY > (not download)
wipe cache and data! (or factory reset)...
DONE!
reboot into the rom that you were trying to use!
takes 20 seconds and no reflashing anything.
Click to expand...
Click to collapse
ok cmw is not mounting cache or anything else any other ideas
Well, Ive been flashing roms for a while now and I have an issue with my captivate.
Lets start in the beginning. I had my captivate on THS ICS rom and It was going great. But my captivate isn't that great anymore. The power button is broken, but I was able to go around that. (Sidenote: It turns on when I plug in the battery.) Anyway, I wanted to go back to stock because I did have the right bootloaders. (I couldnt get into download mode with the button combination. I thought it was the bootloaders fault. Im I wrong?) I wanted to switch to I9000 bootloaders but I had to start fresh. But before all that, I noticed that while I was on ICS rom, I was unable to go to download mode. I used to before, but it magically disappeared (I know it didnt, I know I did something to it but I don't quite remember when it happened.) So I was unable to flash a new rom, if I wanted to.
A couple of days ago, I bought a jig and it worked! It took me straight to download mode. So I decided to get my Captivate and make it go back to stock. So I opened Odin, it found my Cappy and I clicked start. But, it stopped at factoryfs.rfs. I waited a half hour and nothing. So I unplugged it and now it won't turn on. But it can still go into Download Mode and be seen by Odin but it just wont finish. I tried both odin one click and the regular odin. I looked everywhere for more than six hours and nothing came up. Please guys, if anyone knows what I can do to fix it, please reply.
I might have missed something, but just ask if you need any more info. Please help me.
Edit: I forgot to add this:
While I was on the ICS rom, I switched over to CM7 to see if the process of going back to stock would be easier. Thats when I tried to flash stock. It didnt work as well as I thought it would.
And I knew that I didnt have I9000 bootloaders because I installed the Icy Glitch kernel and each time I tried to have DIDDLE on it would go to deep sleep mode and I was unable to wake it back up.
As long as you can get to download mode you are fine. Try flashing a different stock from. Or using Hiemdell
I've tried both odin and Hiemdell. But with Hiemdell, it would always tell me that I dont have the drivers installed. So, it installs it for me. Even with the drivers installed, it keeps telling me that I dont have the proper drivers installed.
I have had this exact problem, where a bricked captivate can get into download mode but when restored to stock through a one-click, it freezes on the factoryfs.rfs. However, in my case after freezing at this stage, the phone was completely inoperable, and could not even enter download mode, so I am suprised yours could.
What works for me is to remove the battery, wait for a few seconds, put the battery back in, use the usb jig to enter download mode, and then WITHOUT the phone plugged into the pc, download and open this one-click file http://http://forum.xda-developers.com/showthread.php?t=731989.
Once the odin one click is open, plug the usb cable into the pc, and then into the phone. This one-click has never failed me. Hope this helps.
Ok, now it passed. I don't know what I did but now its back up and running. But now it boots up into recovery. I can't select anything because my phone's power button is broken. What do I do?
Juiceboy125 said:
Ok, now it passed. I don't know what I did but now its back up and running. But now it boots up into recovery. I can't select anything because my phone's power button is broken. What do I do?
Click to expand...
Click to collapse
Depending on the CWM recovery you're in, you can sometimes use the search capacitive key to do the same thing as the power button will do.
I had the same problem you had with Odin stopping on flashing a file, turns out I was using a third party USB cable. I switched to the USB cable provided by Samsung when I bought my cappy and problem solved. Hope that helps.
Sent from my SGH-I897 using XDA
Finally!
Well, I got my Cappy up and running again. While I was stuck in the CWM I just decided to install Gingerbread using a One click and it worked. Now I'm back to CM9. Thanks guys for the suggestions. I guess I just needed to wait and double check everything.
Hey there, apologies in advance if I have submitted this thread in the wrong section. I really looked as hard as I could before posting.
Well I rooted my phone, got super user on there, then got clockworkmod red, and then attempted to put the ice cream sandwich mod on my phone, thats where everything went sour. Phone would not go past screen that says samsung. I tried a few times to get it to go past that point, and just nothing. I then attempted to use odin to have my phone put back, but now I cannot even get the phone to open up clockworkmod.
To put it very simply. The only thing I have access to now is the download option (holding both volume up and down while inserting the usb cable from the computer) I have searched the internet high and low for something to run through odin to put my phone back to the way it was. I keep coming up with dead links and long dead downloads. I was able to use the gtg ultimate unbrick, but all that managed to accomplish was to have my phone say at&t instead of rogers.
Im still at the screen that says samsung, with no access to a recovery menu at this point. I only have the download option.
Can anyone help me salvage my phone?
edit: I appear to have been able to reput clockworkmod back on the phone with odin. Thats all I have been able to do.
When flashing any ics Rom/port from.gingerbread/red recovery you will need to double flash...I'm seeing a lot of people.with bricks lately and I think the problem is they are not reading enough before flashing ics...
So you have cwm correct? Boot into cwm by holding volume up down and power button. If you have no roms hen go to mounts and storage and mount USB then plug it into the pc and copy over the Rom...if its gingerbread Rom.just one flash...if its ics then flash, you will get stuck on Samsung screen so boot back into cwm...you will either boot into a blue or some distorted rainbowy cwm...just reflash he Rom
If you can't do that...then idk what else to do as I don't know much about rogers phones and what is and isn't compatible with them...but u would suggest qksters heimdal one click back to stock uclb3...its always worked for me...but not sure if it will work with rogers...
Sent from my HTC PH39100 using XDA
Mytheos said:
Hey there, apologies in advance if I have submitted this thread in the wrong section. I really looked as hard as I could before posting.
Well I rooted my phone, got super user on there, then got clockworkmod red, and then attempted to put the ice cream sandwich mod on my phone, thats where everything went sour. Phone would not go past screen that says samsung. I tried a few times to get it to go past that point, and just nothing. I then attempted to use odin to have my phone put back, but now I cannot even get the phone to open up clockworkmod.
To put it very simply. The only thing I have access to now is the download option (holding both volume up and down while inserting the usb cable from the computer) I have searched the internet high and low for something to run through odin to put my phone back to the way it was. I keep coming up with dead links and long dead downloads. I was able to use the gtg ultimate unbrick, but all that managed to accomplish was to have my phone say at&t instead of rogers.
Im still at the screen that says samsung, with no access to a recovery menu at this point. I only have the download option.
Can anyone help me salvage my phone?
edit: I appear to have been able to reput clockworkmod back on the phone with odin. Thats all I have been able to do.
Click to expand...
Click to collapse
If u can get to dl ur fine
Sent from my SAMSUNG-SGH-I717 using xda premium
http://forum.xda-developers.com/showthread.php?t=1331381
Use this link/program from download mode to get to stock 2.3.6.
Wait, if you can get to download mode, you can reflash JScott's option C from here, then get into CWM red, flash the ICS of your choice, reboot into CWM blue (press and hold vol up/vol dn/power 5 seconds when stuck at sammy screen), wipe data/cache/dalvik, reboot and you should have ICS.
I understand that some people will never get "it", but reading the entire post for flashing/modding firmware is a MUST.
Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??
pistol865 said:
Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??
Click to expand...
Click to collapse
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.
bhundven said:
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.
Click to expand...
Click to collapse
Thank you so much for getting back to me. A couple of questions if I may?
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL
pistol865 said:
Thank you so much for getting back to me. A couple of questions if I may?
Click to expand...
Click to collapse
Well, seeming it is the Q&A forum
pistol865 said:
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
Click to expand...
Click to collapse
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
pistol865 said:
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
Click to expand...
Click to collapse
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
pistol865 said:
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL
Click to expand...
Click to collapse
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.
bhundven said:
Well, seeming it is the Q&A forum
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.
Click to expand...
Click to collapse
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.
pistol865 said:
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.
Click to expand...
Click to collapse
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.
bhundven said:
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.
Click to expand...
Click to collapse
Ran into a new problem now...
It's me again... Sorry if I'm being a pain..
So I downloaded the link.. I have it on my desktop...I put my phone into download mode..(Yellow Triangle> Do not unplug).. I clicked on your OneClick... it loads but then tells me to connect my device... It keeps telling me I'm disconnected..
When I plug my phone into my compt via USB.. it now tells me that my device is unrecognized.
Now what did I do wrong?
I was hoping I was close to a resolution... another roadblock.
Can I fix it?
Once again, thank you for any and all the help and advice you have given me.
There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.
limeaide said:
There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.
Click to expand...
Click to collapse
I already installed usbDview.. ran as admisistrator... removed anything that said samsung or android.. plugged in my samsung phone and Still is not recognized. Also downloaded Zadig.. to install the drivers to the phone.. but it doesn't recognize the phone.
Anything else that I'm missing? Can I download something online so that when i plug in via USB it will recognize my phone?
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Tried different usb ports as well as a different computer.. When I hoked up to a different computer, at first it said it was installing the drivers.. then it stopped and said USB device Unrecognized.
Is it a matter of drivers? Can I get them offline? and then plug in my phone?
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Computer pop up says: usb device has malfunctioned and windows does not recognize it.
limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
I just went to the samsung website and downloaded the drivers from there.. Still having the same problem... usb device has malfunctioned and windows does not recognize it.
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
ALMOST THERE.. I think..lol
I think I successfully ran the program.. phone turns on now.. Yayyy...
New Problem:
The screen now says:NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED
The SIM card is already installed... the phone is not recognizing it now.
What now??
limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
One more thing, I installed Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)... That should mean the phone is rooted.. correct? although I don't see SUPERUSER in my apps list.. Also does this have CWM installed? Can I flash a custom rom moving forward?? If so which one do you consider the best? I originally was having trouble because I was running into low internal memory and couldn't download many apps. That's why I wanted to flash BLACK ICE originally.. I thought that would fix my problem..
This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.
limeaide said:
This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.
Click to expand...
Click to collapse
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?
pistol865 said:
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?
Click to expand...
Click to collapse
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.
bhundven said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.
Click to expand...
Click to collapse
No..no.. I'll definitely take your word for it.. I'll stick with the blue. I just thought that with the lagfix, it would fix my problem with internal memory.
My problem now is my SIM card.. The phone reboots and I get : NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED]
I did as you said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Should I still install: download blastoff v2.5?
Thank you again for ALL your help.. You guys saved my phone..