flash 10.1 on 2.2 - Hero CDMA Android Development

Knowing how most custom 2.1 ROMs have it installed and working, why is it that we don't have one for 2.2?
I saved the package in Titanium Backup from 2.1. I haven't tried it but if I restore it while in 2.2 (cm6) I imagine it would not work?
Just curious because 2.1 was never built for flash yet somehow it's available.

obsanity said:
Knowing how most custom 2.1 ROMs have it installed and working, why is it that we don't have one for 2.2?
I saved the package in Titanium Backup from 2.1. I haven't tried it but if I restore it while in 2.2 (cm6) I imagine it would not work?
Just curious because 2.1 was never built for flash yet somehow it's available.
Click to expand...
Click to collapse
I'm not sure so don't take this to heart, but i think it has something to do with the Hero never officially getting FroYo.
Maybe the can't just port it over, or dont have a version for 2.2?
Idk, just my 2 cents.

It's my understanding our phones architecture does not support flash.

This has been answered a bazillion times.
Adobe wrote it for a different cpu architecture, ours is not compatible.
No, flash lite won't work either (yet) until someone finds a way to port it.
CM6 Android 2.2.1 Froyo Darchstar
Radio 2.42.01.04.27
*Bite me Sprint!

And I wanted to be the first to say "USE SEARCH"...

misfit0313 said:
And I wanted to be the first to say "USE SEARCH"...
Click to expand...
Click to collapse
Grr beat me to it.

Then can I be the first to say this belongs under q&a.

I'm pretty sure the only 2.1 ROM that has 10.1 on it is NFX's.

There's actually a few sense roms with full 10.1, and every 2.1 sense rom has flash lite. Papa smurf had a couple with full flash I think. But I gotta tell ya, surfing the web with flash on really slows ya down.
Oh, and MMFCL!
Sent from my HERO200 using XDA App

davec1234 said:
This has been answered a bazillion times.
Adobe wrote it for a different cpu architecture, ours is not compatible.
No, flash lite won't work either (yet) until someone finds a way to port it.
CM6 Android 2.2.1 Froyo Darchstar
Radio 2.42.01.04.27
*Bite me Sprint!
Click to expand...
Click to collapse
This doesn't answer the question, 10.1 works on sense roms on the hero. Why will it work on sense and not cm6? what is the lacking component? Your answer says its the phone hardware, but that cant be correct cause a sense rom uses that same hardware.
So can someone who know the answer please clarify? what does sense have that stock android does not that allows it to run 10.1 flash?
Just curious to know

yxplayer4 v1.5.6 offers a streaming flash browser...which is what i use to view flash videos on 2.2 based ROMS. No issues, works w/ most sites. So if you're looking solely for that purpose, google the apk and enjoy.
+1, 2, 3, 4, etc. on what everyone else has already contributed re: viewing the rest of the flash content on 2.2.

Flash 10.1 is written for ARMv7 processors, right? We have ARMv6 processors, so there's no way of it fully working, if at all.

jasonlefever said:
Flash 10.1 is written for ARMv7 processors, right? We have ARMv6 processors, so there's no way of it fully working, if at all.
Click to expand...
Click to collapse
That's correct.

Ok if full flash is for arm7 devices and not arm6 then why is there full flash for 2.1 roms for the hero even though our device is arm6
Sent from my HERO200 using XDA App

raymond4 said:
Ok if full flash is for arm7 devices and not arm6 then why is there full flash for 2.1 roms for the hero even though our device is arm6
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Fine, tell us how to get full flash then.
(crickets chirping)
CM6 Android 2.2.1 Froyo Darchstar
Radio 2.42.01.04.27
*Bite me Sprint!

I was only asking a simple question. Obviously you aren't mature enough to understand that. Thank you =^.^=
Sent from my HERO200 using XDA App

raymond4 said:
Ok if full flash is for arm7 devices and not arm6 then why is there full flash for 2.1 roms for the hero even though our device is arm6
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
davec1234 said:
Fine, tell us how to get full flash then.
(crickets chirping)
CM6 Android 2.2.1 Froyo Darchstar
Radio 2.42.01.04.27
*Bite me Sprint!
Click to expand...
Click to collapse
raymond4 said:
I was only asking a simple question. Obviously you aren't mature enough to understand that. Thank you =^.^=
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Let's keep it friendly guys, we're all here to help. Also, there is not full flash for 2.1... it's just a modified version of sense flash lite.

raymond4 said:
I was only asking a simple question. Obviously you aren't mature enough to understand that. Thank you =^.^=
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Glad to help. I see someone already corrected your erroneous assertion. Is that the proper decorum you were seeking?
CM6 Android 2.2.1 Froyo Darchstar
Radio 2.42.01.04.27
*Bite me Sprint!

My bad i just was having a bad day
Sent from my HERO200 using XDA App

OK, so in that case, the full answer is this:
No, 2.1 does not have full 10.1 flash support for cdma hero. The 10.1 flash for 2.1 is just modified to fit our phones so that it runs some flash content but not all.
So here is the follow up question:
Will the 10.1 apk work on 2.1 as it did on 2.1? If not, can the full 10.1 for 2.2 be modified to fit our phone hardware to at least run some flash content just as 2.1 apk did?
I'll check the flash player apk someone suggested but I was more interested in flash in the browser. Seems like it worked on 2.1.

Related

Adobe Flash 10?

I'm running Gumbo 1.5c right now.
I've been wanting to upgrade to a 2.1 Rom for some time but I've sort of hesitated until the Sprint Release happens. This, of course, looks like its going to be another month before it comes to fruition. So, I figured I would go ahead and take the leap. I do have one question though;
Do any roms support full Flash yet? I would like to see flash work in my browser.
If our browser will not support flash can we port one over from a phone that does once we load 2.1? The NexusOne has flash, right?
fatkitty420 said:
I'm running Gumbo 1.5c right now.
I've been wanting to upgrade to a 2.1 Rom for some time but I've sort of hesitated until the Sprint Release happens. This, of course, looks like its going to be another month before it comes to fruition. So, I figured I would go ahead and take the leap. I do have one question though;
Do any roms support full Flash yet? I would like to see flash work in my browser.
If our browser will not support flash can we port one over from a phone that does once we load 2.1? The NexusOne has flash, right?
Click to expand...
Click to collapse
I have Flash 10.1 in my ROM. Full flash.
damageless said:
I have Flash 10.1 in my ROM. Full flash.
Click to expand...
Click to collapse
Sweet, your rom is on the top of my list to try.
How well does the Flash run? I'm talking streaming video - wise?
Edit:
Also, [email protected]
fatkitty420 said:
How well does the Flash run? I'm talking streaming video - wise?
QUOTE]
It is there, but I couldn't get Hulu to play anything.
Click to expand...
Click to collapse
Oh, one more quick question!
Can I use SetCPU with the ROM? Or do I need to flash another kernel?
fatkitty420 said:
Oh, one more quick question!
Can I use SetCPU with the ROM? Or do I need to flash another kernel?
Click to expand...
Click to collapse
Best thing to do is just try it i'm running darchlegendv4-2 and it is fast and in my opinion probably just as good as the 2.1 update
Ah. Rather than make a new thread I'll continue to post in here first:
Can someone link me to the news/weather widget APK that the NexusOne has. I know someone ported it over for 1.5 and I really use it a lot.
Thanks!
fatkitty420 said:
Ah. Rather than make a new thread I'll continue to post in here first:
Can someone link me to the news/weather widget APK that the NexusOne has. I know someone ported it over for 1.5 and I really use it a lot.
Thanks!
Click to expand...
Click to collapse
think this is it
http://dl.dropbox.com/u/5153517/Hero/APKS/GenieWidget.apk
regaw_leinad said:
think this is it
http://dl.dropbox.com/u/5153517/Hero/APKS/GenieWidget.apk
Click to expand...
Click to collapse
Appreciate it.
fatkitty420 said:
Sweet, your rom is on the top of my list to try.
How well does the Flash run? I'm talking streaming video - wise?
Edit:
Also, [email protected]
Click to expand...
Click to collapse
Flash works, but streaming is problematic. It works for some sites/applications but for the most part even when it does work it's like watching a slide show. I'm afraid that the Hero just doesn't have enough horsepower to stream flash video via the browser.
i think the current clock speed probably doesnt have enough power but if we can OC it then we'll probably get somewhere
damageless said:
I have Flash 10.1 in my ROM. Full flash.
Click to expand...
Click to collapse
Full flash or just flash lite?
How would I go about adding full flash to my Rom?
Full flash is useless on this phone... Like waiting for a stripper that shows up 2 hours late and then is fat and ugly to boot.
I dont know why people want flash, You get a more robust browsing experience?
Well a slower one too i suppose.
i thought we werent supposed to use SetCPU for the newer ROMS cause it has a built in power manager
mercuryhayes said:
i thought we werent supposed to use SetCPU for the newer ROMS cause it has a built in power manager
Click to expand...
Click to collapse
That is correct. You beat me to it. I also heard that SetCPU is not compatible with the latest jumbo kernel in these CDMA Hero 2.1 ROMs anyway.
So I assume that flash is something that must be cooked into a rom, not something that can be put in retro actively? Is this correct?
jharp146 said:
So I assume that flash is something that must be cooked into a rom, not something that can be put in retro actively? Is this correct?
Click to expand...
Click to collapse
Looks like it.
Damn, I really want a true flash device. For ****s sake how long until this happens?
fatkitty420 said:
Looks like it.
Damn, I really want a true flash device. For ****s sake how long until this happens?
Click to expand...
Click to collapse
However long it takes you to get an Evo? If you can figure out how to overclock this phone Flash might have a snowball's chance of being usable on the Hero.
My problem with flash is that it is processor intensive and just sucks the battery out of the device. I just turn it off, no matter how feature complete it is. Also, If I have to overclock my device to get it even run "at-par", this will suck my batter down even more.

Stock Froyo or Gingerbread ROMs?

Do any stock Froyo or Gingerbread ROMS exist for the Captivate? I see all of these aftermarket ROMS posted but I don't like all the themes or added programs they come with. I just want a stock ROM.
There is AT&T stock 2.2 and Rogers stock 2.2 depending on which Captivate you have.
2.3 has not been released for the Galaxy S. It was leaked for the i9000, but that ROM isn't working yet. The only real 2.3 ROM for the Captivate is CM7 which is not yet stable.
Clyzm said:
There is AT&T stock 2.2 and Rogers stock 2.2 depending on which captivate you have.
2.3 has not been released for the Galaxy S. It was leaked for the i9000, but that ROM isn't working yet. The only real 2.3 ROM for the Captivate is CM7 which is not yet stable.
Click to expand...
Click to collapse
It is quite stable from what I heard, there's just a few bugs
Sent from my SGH-I897 using XDA App
goob1284 said:
It is quite stable from what I heard, there's just a few bugs
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Stable from a programmer's standpoint isn't the same thing as stable from a user's standpoint. CM7 is not yet stable.
goob1284 said:
It is quite stable from what I heard, there's just a few bugs
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Yeah, I'm running CM7 right now and it's stable, but definitely still has some bugs. Feature wise, it seems packed, but some of the bugs I am experiencing are QUITE irritating for daily use.
Dante04SRT said:
but some of the bugs I am experiencing are QUITE irritating for daily use.
Click to expand...
Click to collapse
Which is exactly why it's not a stable ROM yet, in addition to a few things under the hood.
But let's not get too off topic, the OP wants stock ROMs.
mintyfresh26 said:
Do any stock Froyo or Gingerbread ROMS exist for the Captivate? I see all of these aftermarket ROMS posted but I don't like all the themes or added programs they come with. I just want a stock ROM.
Click to expand...
Click to collapse
Seriously? If you want a stock ROM then just use the one available from your carrier. Cognition 4 is as close as a custom ROM can be to stock, but minus the bloatware and it has some minor performance tweaks. This place isn't in the business of creating "stock" ROMs.
For stock like feel, i'd recommend one of two roms. Andromeda 1.2 (unthemed) or Cog 4.1. Andro is based off of the Armani Captivate 2.2 and the devs did a fantastic job of making it somewhat minimal and still has all the goodies. They also added a few other nice touches. Cog is based off of official ATT 2.2 with the bloatware gone and lagfix installed. It is also very nice but didn't hold my attention the way Andro does. As was already mentioned CM7 is ok for people that know how to trouble shoot their phones and can deal with the bugs. It's NOT meant for people new to their phones and flashing.
Miami_Son said:
Seriously? If you want a stock ROM then just use the one available from your carrier. Cognition 4 is as close as a custom ROM can be to stock, but minus the bloatware and it has some minor performance tweaks. This place isn't in the business of creating "stock" ROMs.
Click to expand...
Click to collapse
AT&T hasn't pushed an update for the Captivate. Even if they did it would still be loaded with crapware that slow the phone down.
So, it's impossible to get a stock rom easily?
mintyfresh26 said:
AT&T hasn't pushed an update for the Captivate. Even if they did it would still be loaded with crapware that slow the phone down.
So, it's impossible to get a stock rom easily?
Click to expand...
Click to collapse
The update came from Samsung and not ATT. The easiest way to get a "stock rom" is to use keis to do the update. Yes it will come with all the bloat from ATT. If you dont want the bloat then there are ways to remove them, gone over many times in the forum which you would have found had you done a search.
As for Stock Gingerbread roms, well to be honest we will most likely not see an ATT stock gingerbread as the 2.2 update is most likely the only one we will get through official channels
mintyfresh26 said:
AT&T hasn't pushed an update for the Captivate. Even if they did it would still be loaded with crapware that slow the phone down.
So, it's impossible to get a stock rom easily?
Click to expand...
Click to collapse
What you just described IS THE STOCK ROM.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
The most up to date stock rom you can get is 2.2 from Samsung Kies which can be downloaded here: samsung.com/us/support/downloads/SGH-I897ZKAATT.
This also includes the usb drivers. Just connect your phone to your computer and update.
Sorry cant post the actual link I'm new
adm226 said:
The most up to date stock rom you can get is 2.2 from Samsung Kies which can be downloaded here: samsung.com/us/support/downloads/SGH-I897ZKAATT.
This also includes the usb drivers. Just connect your phone to your computer and update.
Click to expand...
Click to collapse
Install 2.2 using info in quoted post
root using super one click
DL Ti Backup from the market
Remove all the AT&T/Samesung Apps that you do not want
Profit
Here is a guide that pretty much tells you how to do almost anything on your captivate. Only a couple things like flashing a custom rom are excluded.
Once again, I can't post real links cause I'm new.
forum.xda-developers.com/showthread.php?t=761819
Just download the pdf.
mintyfresh26 said:
AT&T hasn't pushed an update for the Captivate. Even if they did it would still be loaded with crapware that slow the phone down.
So, it's impossible to get a stock rom easily?
Click to expand...
Click to collapse
Any easier than Kies? No. Dude, you're so far out of the loop you're oblong.
Miami_Son said:
Any easier than Kies? No. Dude, you're so far out of the loop you're oblong.
Click to expand...
Click to collapse
I'm not sure mintyfresh26 knew about samsung kies at the time of this post. It's not a big deal.
He should just install Cognition 4. It's probably what he wants.
adm226 said:
I'm not sure mintyfresh26 knew about samsung kies at the time of this post. It's not a big deal.
Click to expand...
Click to collapse
Sounds like there's a lot he doesn't know about.
Clyzm said:
Stable from a programmer's standpoint isn't the same thing as stable from a user's standpoint. CM7 is not yet stable.
Click to expand...
Click to collapse
its actually quite stable. and im not a programmer. it just has a few bugs from my experience but what rom doesnt?

[ROM] 2011-08-04 - ROOTED "Official Update" - x99_GB_Sense_Stock_Rooted_2.76.651.4/5

[ROM] 2011-08-04 - ROOTED "Official Update" - x99_GB_Sense_Stock_Rooted_2.76.651.4/5
This is *completely* based on NFX's release of 2.72.651.2
- modded kernel ramdisk for root
I flashed this ROM with *nothing* else loaded on my phone, and it booted up and is running just fine so far.
My usual routine:
- format system
- wipe data / factory reset
- install ROM
If you flash this over another ROM without wiping, you may encounter errors.
Examples:
- Opening the settings in the messaging app = force close. Fix this by wiping the data for the messaging app.
- Wallpaper picker not showing previews.
Download 2.76.651.4 ROM v1: http://bit.ly/iNX9qc md5sum: 793da0847bd2b452cc7887480abae029
Download patched OTA 2.76.651.5 patch: http://bit.ly/pQ1KpP DOES NOT REMOVE ROOT!
is this the one with the newest update? 2.76.651.4?
Yeah, I named it wrong... one second.
FIXED. lol ... that's what I get for rushing.
Thank you will test tonight
Sent from my PG06100 using XDA Premium App
so basically the difference between this and nef is that theres a kernal we can adjust using something like cpu controller?
dude that was fast so now i dont have to unroot my phone in order to update to this new Offical update. thanks you da man
popasmurfn23 said:
so basically the difference between this and nef is that theres a kernal we can adjust using something like cpu controller?
Click to expand...
Click to collapse
No custom kernel yet... at least not until HTC releases source code.
For this, I had to modify a file within the kernel so that we can have root.
Good stuff, I will try this out tonight? Is it basically the OTA with root?
sense 2.1?
In the leaked version it had sense 2.1? Is it the same for this version or does it only have 1.0
Does this kernel have bfs in it?
Sent from my PG06100 using XDA Premium App
sparksco said:
Does this kernel have bfs in it?
Sent from my PG06100 using XDA Premium App
Click to expand...
Click to collapse
dude, it a stock rom. stock kernel. he just said that he didn't modify it.
...waiting to hear about a couple of other successful rom flashes before i put this on my wife's shift...
Sorry I should of asked first if this kernel is compatible with bfs or not
Sent from my PG06100 using XDA Premium App
dave0704 said:
Good stuff, I will try this out tonight? Is it basically the OTA with root?
Click to expand...
Click to collapse
Exactly that.
Deleted by member
leave for an hour to get a hair cut and come back to see a flashable.. good stuff.
Newkidds post
Amazingly smooth running rom, blows away the old mikshifted-g roms. 2.3.3 android with 2.1 sense people. The op link does not work download the link from newkidd. Comes with root
x99percent said:
Exactly that.
Click to expand...
Click to collapse
Including the new WiMax radio? Just want to make sure
c00ller said:
Including the new WiMax radio? Just want to make sure
Click to expand...
Click to collapse
Yeah has the new wi-max radio
This thread deserves five starts just for the root feature. Great job
Hows the battery life to whoever tested this?
Sent from my Evo SHIFT on Evervolv ROM with x99 Kernel using XDA App

Android 2.3.5 AOSP Gingerbread

I didn't make this ROM. Credit goes out to the developer.
This rom is mostly AOSP besides the bootscreen and CPUconfig menu
All Google Apps are up to date as of 7/31/2011
No need to get seperate gapps zip
http://wonderly.com/bb/DROID/ROM/BETA/generic_sholes-ota-eng.pete.07-26-11.zip
I see u have 6 months with your phone now you post lolz
Thanks for this.
Wonder if this will work on my milestone. Anyone know if the droid and milestone roms are interchangable?
Zaiaku said:
Wonder if this will work on my milestone. Anyone know if the droid and milestone roms are interchangable?
Click to expand...
Click to collapse
They won't work at all. Droid's bootloader is unlocked, Milestone's isn't. Flashing this would be a big problem for your Milestone.
Thks for the heads up on it.
running this as of yesterday. super fast, running chevyno1 lowv 1.1 kernel. only thing i miss from CM is the CM parts. gonna push it to my /system/app folder and set things up that way.
Honestly, I've tried overclocking this, and its still terribly slow. That's why I'm sticking to CM7 800mhz oc
Sent from my Droid using XDA App
I can actuall run and play Nova 2, of course it has its occasional lag, but playable none the less. Good find
Sent from my Droid using XDA App
does anyone have another dl link, the one above is down
Maxi21066 said:
does anyone have another dl link, the one above is down
Click to expand...
Click to collapse
The original link i provided is outdated now.
This site should list the current beta's of this rom
http://bb.darkwingduck.org/DROID/ROM/BETA/
Currently the site is down, but it may be back up later
The new link to the GPA17 nightlies, posted on Peter Alfonso's (the developer) webpage, is http://wonderly.com/bb/DROID/ROM/GINGERBREAD/

[Source] G2x \ LG P999 2.3.3 OTA Source Code [8.16.11]

We have all been waiting very patiently, but we finally have it, AHEAD of schedule. The source code for the LG 2.3.3 OTA update is now available. You can either download it straight from LG's open source site or via the mirror I created. Enjoy!
LG's Open Source Site: Link
Download Link
Let the custom kernels\builds begin........May the source be with you!
Forgive me if this is a stupid question, but does this source have any value to the 2.3.4 and 2.3.5 roms? For the longest time I was using X boarders OTA Tweak, but recently switched to EB 1.08 (2.3.5) and love it .
Will this code bring the 2.3.3 roms to a whole new level where I might want to go back. Will this allow Whitehawkx and Doniqcc to fix a few of there issues in theit 2.3.3 roms?
Just wondering what this means? Maybe it just means an OC / UV Kernel which would be great too, especially if Faux can get voodoo working on 2.3.3.
Sent from my LG-P999 using Tapatalk
Will this help flako with his LG Camera issues? Upside down pictures, sideways ffc and rocker zoom in video recorder.
Oh the possibilities!
Sent from my LG-P999 using Tapatalk
Now to just wait on a custom Kernel
Sent from my LG-P999 using XDA Premium App
already posted a few hours earlier:
http://forum.xda-developers.com/showthread.php?t=1220885
Maybe merge threads?
jabhome said:
Will this help flako with his LG Camera issues? Upside down pictures, sideways ffc and rocker zoom in video recorder.
Oh the possibilities!
Sent from my LG-P999 using Tapatalk
Click to expand...
Click to collapse
Maybe but this is gb source code not froyo.
Lg camera is only for froyo
That's y its hard
That's what she said...
Can't wait for evil to cook up some sweet roms
Sent from my LG-P999 using XDA Premium App
Will this help guys that make 2.3.4 and 2.3.5 roms to make them more compatible with the G2x? Will they be able to use it to make a2dp work?
aowendoff said:
Will this help guys that make 2.3.4 and 2.3.5 roms to make them more compatible with the G2x? Will they be able to use it to make a2dp work?
Click to expand...
Click to collapse
That'd be nice, but most likely not. They aren't waiting for the kernel source for a2dp on .3.4 and .3.5, they're waiting on the source code from nvidia. As nice as it'd be, I wouldn't hold my breath on that one.
Still, this is very good news either way.
I do agree that it is good news. I was really just curious.
dj tray said:
Can't wait for evil to cook up some sweet roms
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
EvilD sold his G2x and is no longer developing for this device. Sorry for the bad news. Luckily, WhiteHawkx and Roman from EDT are awesome devs are work on the G2x. You may juts need to remind Roman to give us G2x users some love, especially now that we have code to play with
aww man
was waiting for this
aowendoff said:
Will this help guys that make 2.3.4 and 2.3.5 roms to make them more compatible with the G2x? Will they be able to use it to make a2dp work?
Click to expand...
Click to collapse
Probably not, this will just hel for custom kernels for 2.3.3. Our issue with 2.3.4 adn 2.3.5 has to do with missing source\technical specs from Nvidia, which we may never get. Its not that AOSP (2.3.4, 2.3.5, Cm7) isnt compatible for the G2x, it just doesnt have the necessary drivers and such. The talented CM7 team (mainly CM-Arcee) has done a fantastic job of writing drivers for battery and other functions from scratch, because this source is made for the LG build which is NOT AOSP, despite looking like it. Hope that clears up the source issue and eliminates the "will this fix X,Y, or Z in 2.3.5, CM7, etc"....probably not.
As lge had released source code for 2.3.3 , will this help to solve rooting issue with 2.3.3 ota / lg update utility.??
Sent from my LG-P999 using XDA App
ahspyerr said:
Maybe but this is gb source code not froyo.
Lg camera is only for froyo
That's y its hard
That's what she said...
Click to expand...
Click to collapse
I might be mistaken but when I clicked on the link it had the source code for gingerbread as well as froyo...
bosshog187 said:
I might be mistaken but when I clicked on the link it had the source code for gingerbread as well as froyo...
Click to expand...
Click to collapse
I noticed that too.
I will try work on the OC kernel for GB today, but unfortunately I need to have my root canal updated to 2.0 because 1.0 was a fail So no promises...
faux123 said:
I will try work on the OC kernel for GB today, but unfortunately I need to have my root canal updated to 2.0 because 1.0 was a fail So no promises...
Click to expand...
Click to collapse
Faux they should build a pyramid in your name to pay homage for all the work you do here.
Can't wait for some custom kernel love now I know Faux is going to hook it up big time!!!
Oh yea man, weapon, fauxs kernel, and voodoo, doesn't get any sweeter

Categories

Resources