Related
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
Recently received the Phantom Skinz Full Body set and have gone through installation.
Here's the breakdown:
The Pros:
- The Screen Skin looks good and feels good. The extra drag vs. the stock glass is slight and the overall clarity is very good (doesn't have any noticeable detraction from the crisp, contrasty screen).
- The main screen skin and front overlays were fairly easy to apply and once dried have a very nice unobtrusive look
- Comes with 2 sets of skins
The Cons:
- included directions are WAY OFF from the install video on their site. Soaking times, how long to let it sit and dry, etc...
- Edge bubbling on every corner for the back overlays. Directions say to "cup the corner with palms and hold 30 seconds", but I've done it over and over again and they keep popping off after a short while
- A WHOLE LOT of wet work involved in applying these skins. Application involves soaking the skin in water first, then (as instructed) with your fingers fully wet, take the wet skin and put it wet onto the phone and then use the included credit card shaped "squeegy" to push out the extra water. Not so much a big deal for the screen skin, but getting that much water around and near the audio/mic/power and such ports while putting on the body skins is asking for trouble.
Final Thoughts
I imagine in some small (heck, maybe in large) part, the corner bubbling issue is due to me not applying the skin properly. But I'm not some clueless granny that doesn't know the difference between a mouse and a blackberry and the included instructions are vague in important places and almost completely different than the video instructions shown at their website (for example; The included instructions say to use warm water WITH SOAP)
Bottom line: Stick with just the screen skin, skip the full body.
The online video instructions say to use soap as well. IIRC, she said that at their facility, they use one drop of Johnson's baby shampoo per 32 oz of water.
I would avoid Phantom Skinz altogether. Here's the review I posted about my experience with one of them on my Moto Droid in the skins topic.
Phantom Skinz
I got a PS for my Moto Droid because I didn't want something as grippy as the Zagg. PS had great reviews and came with 2 full sets for the price of 1 zagg with 33% off on top of that ($16.50 in the end). The first installation of the screen got some dust and fuzz under it since I was OCD about getting it perfect, so I emailed them and they sent me a replacement for free no questions asked. I know it did come with two sets of protectors but I wanted to keep one as a backup still. Second installation was perfect. No dirt, dust, fuzz or finger prints. Screen was perfectly smooth (no orange peel) and the touch felt almost the same as the glass. Put the rest of the body on without a problem as well with just a few bubbles in some of the tougher spots. I was very impressed, but now a month later I am not so much. After daily use taking my phone in and out of my pocket (sometimes shared with keys) the skin is filled with knicks and wrinkles. While the film may not technically scratch, it is vulnerable to indentations and air bubbles forming which do not "self heal". Instead of scratching, it seems like the skin stretches in place, resulting in a wrinkle/groove with little marks that look like air bubbles underneath. Not only does it make the screen look dirty, but you feel them while using the touch screen. As I write this, I just dug my finger nail into the screen and tried to scratch it, leaving another permanent groove. Needless to say, I will be taking off the PS and throwing it in the trash. The rest of the body has surprisingly stayed pretty clean of wrinkles, so it may have something to do with its application on glass. I will put some pictures up when I get the chance this evening. Overall, I would not recommend PhantomSkinz. It looked and felt great for a couple weeks, but now every day I am finding more and more knicks and wrinkles and that is just unacceptable compared to others. This skin is NOT scratch proof like other comparable skins on the market! However, I will commend their customer service for being very helpful and quick to reply.
And here a pictures of what it looks like:
h ttp://forum.xda-developers.com/showpost.php?p=5415251&postcount=44
(remove the space after the h, I can't post links yet)
Bottom line here as that they are smoother than other brands but scratch pretty easily. You should check back in on this topic in a month or two and see if your opinion has changed.
I applied the full body skin about a week ago. There's definitely a lot of water involved but most of the danger can be avoided with some caution. I used Q-tips to do a lot of the credit card work around the edges so that it soaked up the water it pushed out.
A good trick for the corners is to use some sealant/piping tape to hold them down. This is a lot better than using your hand for 30 seconds, and you can leave it there for as long as you want (I left the tape on mine for 2 days since I wasn't going anywhere that I needed to show off my phone, I figured why not? Now my corners are perfect).
So far I like PhantomSkinz because it wraps the corners a little better than the other skins. Bodyguardz is a little better in clarity and material. InvisibleShield has too much of the orange peel effect. Haven't had a chance to try BestSkinsEver.
As for detonation's review, it's too early for me to tell if I'll have the same problems, but I agree that the material doesn't seem on par with InvisibleShield or BodyGuardz. But since I still used the carrying case and treat my phone with much care even with the skin on, I don't think it'll be too much of a problem.
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
Dude... you BARELY have to use any water to get the screen to turn out right. Sorry you wasted your PS... but ask them for a replacement, and mail it to me! I do this **** with my eyes closed. It's really not rocket science, and you don't have to "dunk" your phone in water.
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
you didnt follow the instructions and it didnt work well for you? gtfo
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
Try clairivue or martin fields. Just do a google search since I can't post links yet.
typ_ex said:
you didnt follow the instructions and it didnt work well for you? gtfo
Click to expand...
Click to collapse
LOL! i agree. i have had no issues at all with my phantomskinz- both on the magic and now my nexus- i'll admit i do suck at installing them but what i do is get a bowl o water, put a few drops of baby shampoo in swich it around a bit, then dunk the piece in there- hold it over bowl until excess is removed then you can put it on device- the soap/water allows you to move it into position easily and helps squeegee the bubbles....
i wouldnt blame a product because you didnt follow their instructions how to install it...
I actually prefer the bowl of soapy water to the sprays that come with other skins. Submerging it ensures the entire skin is lubed up, and the small amounts of drips on the device is harmless. Just let it dry out overnight before turning it on.
I think Martins is completely over priced. I tried BSE and Phantom and all works great. Once dried it is practically invisible with only the slightest orange peel effect. I'm pretty OCD and it is minimal enough that it doesn't bother me. What does bother is that both of the screen protectors are slightly shorter than the screen.
As for applying the phantom and drowning in water as people are saying I don't do that. I've put on enough of these to know you only need a slight amount. I use a spray and just mist the backing so that it is enough to be able to adjust when putting on but not dripping with water. I use a cloth to absorb the water on the edges as I push the bubbles/excess water out. Fairly easy process. It just takes a slow hand and patience.
pongalong said:
A good trick for the corners is to use some sealant/piping tape to hold them down. This is a lot better than using your hand for 30 seconds, and you can leave it there for as long as you want (I left the tape on mine for 2 days since I wasn't going anywhere that I needed to show off my phone, I figured why not? Now my corners are perfect).
Click to expand...
Click to collapse
Ok I have to ask: what is sealant / piping tape? And where do you buy that? Home Depot? Bed, Bath and Beyond?
Paul22000 said:
Ok I have to ask: what is sealant / piping tape? And where do you buy that? Home Depot? Bed, Bath and Beyond?
Click to expand...
Click to collapse
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
pongalong said:
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
Click to expand...
Click to collapse
...and it's non-stick!
typ_ex said:
you didnt follow the instructions and it didnt work well for you? gtfo
Click to expand...
Click to collapse
Like I mentioned before, my application didn't work well cause I didn't follow the instructions. And I wasn't hating on PS, get a grip. Besides after some people posted about this topic I might give it another go, PS gave me two for one so I can redo it. Why are you here? Perhaps you should try posting things that are more constructive.
pongalong said:
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
Click to expand...
Click to collapse
Interesting. I'll definitely get some. Thanks for the tip.
Hmm... I'm going to go to Home Depot to buy some kind of special tape I've never heard of to wrap up my phone like a mummy in order to prevent the corners from lifting on my phone's skin protector. Phone enthusiast or what?
Phantom does have the best skins by far...
The trick to installation to make it perfect:
Use the Johnson's/water mix as they advised.
Ignore all of their other directions.
Peel off the piece you want to apply. Dryly.
Dip your fingers in the water and apply it to the skin using your fingers.
Once both sides of the skin are wet, use your fingers as a squeegee to pull off any excess water.
Apply the skin to your phone. Keep the skin sitting on your phone in it's original shape.
Use your fingers, not the applicator card, to squeegee out the air bubbles. You don't need to apply very much pressure at all. The bubbles move around extremely easily.
Now, let the skin dry for about 2 minutes. Once you notice the skin starting to cling to the phone a little harder, grab the ends that you need to wrap around the phone and stretch them into place. This is the key step. Stretching it makes it stick so much better, the corners align perfectly with the phone when you do this, and all the gaps left between the skin pieces when you don't stretch it are gone. The skin has to be stretched to fit the phone, otherwise the pieces will all be a little to small and the corners will blow.
Repeat with the other pieces.
Enjoy your sexily phantom skinned N1.
anyone with pics of this case ?
I just wanted to comment about Phantom Skinz because I have had a really good experience with them and I am going to get another set from them as soon as they release it for the HD2!
I got Phantom Skinz for a Nano about a year ago and it has been awesome! I bought the PS retail (they have a location in my area) so I only got one set, but I did it myself with no problems. I had to take it off for a warranty replacement on the Nano and I put the same skin back on the new Nano and it looks just as good as it did on the first application. It's awesome that it can be taken off and put back on again using only water.
I got GA for my G1, but it is the worst product ever. I had it professionally installed at a Ghost Armor location because I wanted it to be perfect for my baby. But it didn't even last a month before it started peeling! GA can only be applied once with a special solution (thats what the GA salespeople told me) and it can't be fixed with water like Phantom Skinz. Phantom Skinz has never actually peeled like the GA did, but at least I could fix PS with water if I needed to!
I literally had the full body GA skin replaced 4 times in the course of a year because it peeled so bad and I am not just talking the corners! I did everything they told me to; keep the phone in a case so it doesnt rub in your pocket, keep any liquid of the phone (durr), don't leave the skin in prolonged sunlight, blah bla blah.
It was $35 for the original GA skin and installation and then they charged me $10 labor for the "free warranty replacement" every time I had the skin redone. Oh, and they changed the GA product for my phone 3 times out of the 4 I got it replaced and the changes never fixed any of the problems I had with the skin. GA also yellowed really bad and actually got progressively worse over the course of their " improved product revisions". The last time I had the G1 wrapped the skin was a pretty moderate yellow in about a week...
The salespeople sucked me in every time with leading me to believe the GA skin for the G1 was revised and the problems were fixed. I spent way too much money on their crappy ass product!
Ghost Armor is an awful product! Please just stay the hell away from them!
There is no need to submerge anything in any fluid. I have installed clear skins on many devices by using soapy water. I dont spray it on the phone, I spray a small mist on the protector before applying. Trust me there is not enough water to damage anything because as i push out the bubble I wipe the water.
If you are concerned about it then remove the battery and wait a day like the other people have suggested. once the process is complete the skin will need to settle for a few days before it looks good.
I used some spray that came with a skin before and I did not like it compared to the soapy water MIST.
I also do not use the skin on touch screens because my finger drags on it compared to other screen protectors that are designed to protect the screen.
Product Page: http://www.skinomi.com/samsung-fascinate-skin-protector.html
(note: the link says fascinate skin but the product is for i9000 international with the lower button)
What's in the package:
http://f.cl.ly/items/8a50274835a46e0afb02/Skinonmi (1 of 9).jpg
• Samsung i9000 Galaxy S Skin Protector
• 1 Installation Squeegee
• 1 Bottle of Application Solution
• Installation Instructions
Front Skin
Ease of install - 5/5 - Pretty easy. Just get your hand and the TechSkin wet, place it on the (clean) screen slowly and use the squeegee to remove all the moist stuff out of the way.
Transparency - 5/5 - Crystal clear if you ask me. Most people won't notice unless you say that there is a screen protector.
Touch - 5/5 - You won't feel slight change in touch response from the screen. The surface itself isn't smooth, but your fingers won't feel it. You won't see it either unless you put the lights on your phone the same way as I do here:
http://f.cl.ly/items/a1747ac42baf070ef7f6/Skinonmi (4 of 9).jpg
How does it feel? - 3/5 - Well this is the only bad thing I can really tell about this screen protector. Due to it's nature, it's very thick skin. This in addition to the fact that Skinomi can't create exactly perfect skin in terms of size for the Galaxy (because they can't or because they want to ease on the installation step) creates very nasty feel when you touch the home button.
Close look:
http://f.cl.ly/items/fd273cd62c42eade1b5b/Skinonmi (2 of 9).jpg
You see the space between the button and the skin itself? well, when you move your finger over that you actually start feeling the skin rubbing against your finger. And after months that you loved you SGS smooth as silk, this isn't a very nice change.
How firmly is it attached? - 5/5 - You can't remove it by mistake. After you let it dry for couple of hours it's pretty much solid. after another 12-24 hours there's no sign for wet marks or anything similar. And unless you installed it wrong, it will stick to the screen until you going to take it off with a little force.
Overall 4.5/5
Back Skin
Ease of install - 3/5 - This one is more tricky. The SGS have some nice curves on it's back plate. it makes the install very long and patient and precise process which I didn't have. At first you need to glue the main back part and the top/left/right/bottom edges. Then, let it dry like 20-30 minutes so it won't move and try to place the corners. I guess I wasn't precise enough when I installed it because two of the four corners didn't stick as smoothly as I wanted, creating nasty sharp edges.
The solution? I just removed them with scissors:
http://f.cl.ly/items/7e070080500fa030ab0e/Skinonmi (5 of 9).jpg
Transparency - 5/5 - Same as before, Crystal clear.
How does it feel? - 3/5 - Same problem as before, but from another side.
The back plate itself is smooth as the original one. But once again due to the thick skin, when you move the fingers across the edges of the phone (near the silver frame) you cant ignore that skin just rubbing back against your fingers.
Note the the thickness in the top left corner of the phone:
http://f.cl.ly/items/b03549124e496679780a/Skinonmi (7 of 9).jpg
Overall 3.5/5
Bottom Line
Skinomi is a good product. I'm not a big fan of hard/soft cased for your cell phone, especially not for such big and pretty cellphones as the SGS.
Skin will protect only against scratches and not hard floors but that's a risk I'm willing to take.
The only thing that's really bothers me with the skin is that it takes that smooth feel that the SGS has. I really likes that feel and I don't think that there's any other phones that quiet feels like the SGS in hand.
Currently I will keep the screen protector but will keep looking for better solution for the back panel.. maybe trying CM Barely There case. But until then my phone will be skinned
I've seen a few videos on how to apply a tempered glass screen protector, but I'd like a few tips on how to apply one from those who have done it without any bubbles and problems.
What should I do to apply one without any problems? I have a new tempered glass screen protector and I want to install it without any problems.
TIA
vaibhav.ravi said:
I've seen a few videos on how to apply a tempered glass screen protector, but I'd like a few tips on how to apply one from those who have done it without any bubbles and problems.
What should I do to apply one without any problems? I have a new tempered glass screen protector and I want to install it without any problems.
TIA
Click to expand...
Click to collapse
Not gonna have bubble from a tempered glass screen protector. Most important thing is cleanliness. Removing every possible piece of dust/fiber/dirt/fingerprints/etc from the phone will make the application much cleaner and nicer. That, a steady hand, and some patience. But, this is probably better off in the actual forum about Accessories.
I applied a few screen protectors using as reference yt videos (nothing I invented).
Overall it's important to:
- plan plan plan. do your homework, see how and where it should fit (you can use the hinge method, but I usually find that a lot more error prone than good old preparation and careful placement and a lot of patience).
- work in a well lit environment.
- work in a clean environment (it is very well worth to apply the protector in the bathroom after a shower, or with the hot water running - settling all the dust).
- use no marks sticky tape the ones that are translucent white are the best - no need for any brand or something).
- clean the screen with a micro fiber cloth and some screen cleaning products (you should not over do it but it should usually clean and smudge / oil / lint free).
- use pieces of sticky tape to "tap and remove" any visible dust from the screen (usually I use a led flashlight to create an alternate spotlight on the screen to find dust).
- apply the protector and try to get it right in the first go (it is fairly important for glass protectors to not lift them). for regular protectors you can always lift them and remove dust, but double check about glass ones because those should not be lifted and reapplied as far as I know.
- smudge any bubbles as per the screen protector instructions.
in installed the MIME featherglass temperred screen protector...
suggestions?? CLEAN CLEAN CLEAN enviorment
(i did this)
go to your bathroom, wipe the counters clean....
pre clean your screen with a non streak cleaner...
clean it using a non fiber cloth for glasses
turn shower head to HOT and let it run a few minutes until your mirrors start to fog mirrors
wash hands, (no greasy fingers for this)
turn shower off, and leave door closed. start the process
once again, wipe the screen again! make sure u shake the cloth and wipe again
look at different angles to make sure its not dusty
take film off screen protector... hold by borders using the very tips of fingers
start by getting real close to the earpiece, center it, and ensure the borders are even....
keep getting closer, once it makes contact with earpiece and its centered, put a finger on it lightly to prevent movement...
before letting the screen protector down, make sure its lined up to be straight and just start to let gravity make the contact
squeeze bubbles starting from center towards borders if needed... i had not a single bubble...
i had to peel mine up to aligh it perfectly because i didnt do this above the first time
now i have a perfect protector with no dust, no bubbles and its awesome
es0tericcha0s said:
Not gonna have bubble from a tempered glass screen protector.
Click to expand...
Click to collapse
I meant the spider bubbles that everyone seems to be getting , I really wanna avoid those!
That, a steady hand, and some patience. But, this is probably better off in the actual forum about Accessories.
Click to expand...
Click to collapse
I tried, but since this is a Q&A forum, xda said I was better off posting it here. Anyways thanks for the info
kraven001 said:
I applied a few screen protectors using as reference yt videos (nothing I invented).
Overall it's important to:
- plan plan plan. do your homework, see how and where it should fit (you can use the hinge method, but I usually find that a lot more error prone than good old preparation and careful placement and a lot of patience).
- work in a well lit environment.
- work in a clean environment (it is very well worth to apply the protector in the bathroom after a shower, or with the hot water running - settling all the dust).
- use no marks sticky tape the ones that are translucent white are the best - no need for any brand or something).
- clean the screen with a micro fiber cloth and some screen cleaning products (you should not over do it but it should usually clean and smudge / oil / lint free).
- use pieces of sticky tape to "tap and remove" any visible dust from the screen (usually I use a led flashlight to create an alternate spotlight on the screen to find dust).
- apply the protector and try to get it right in the first go (it is fairly important for glass protectors to not lift them). for regular protectors you can always lift them and remove dust, but double check about glass ones because those should not be lifted and reapplied as far as I know.
- smudge any bubbles as per the screen protector instructions.
Click to expand...
Click to collapse
Thanks mate I'll post here once I've installed mine!
chaco81 said:
in installed the MIME featherglass temperred screen protector...
suggestions?? CLEAN CLEAN CLEAN enviorment
(i did this)
go to your bathroom, wipe the counters clean....
pre clean your screen with a non streak cleaner...
clean it using a non fiber cloth for glasses
turn shower head to HOT and let it run a few minutes until your mirrors start to fog mirrors
wash hands, (no greasy fingers for this)
turn shower off, and leave door closed. start the process
once again, wipe the screen again! make sure u shake the cloth and wipe again
look at different angles to make sure its not dusty
take film off screen protector... hold by borders using the very tips of fingers
start by getting real close to the earpiece, center it, and ensure the borders are even....
keep getting closer, once it makes contact with earpiece and its centered, put a finger on it lightly to prevent movement...
before letting the screen protector down, make sure its lined up to be straight and just start to let gravity make the contact
squeeze bubbles starting from center towards borders if needed... i had not a single bubble...
i had to peel mine up to aligh it perfectly because i didnt do this above the first time
now i have a perfect protector with no dust, no bubbles and its awesome
Click to expand...
Click to collapse
my bathroom doesn't have a counter, so I guess I'll leave my room for a couple of hours with the windows shut and try that! thanks for the tips!
I read somewhere in the past about using one of those GPS windshield (glass) mounts for installation.
It worked like a charm for me. What you do is stick the mount in the center of the tempered glass protector.. and drop it onto the screen. It's much easier to place perfectly and no accidental fingerprints along the edges.
TimeRunz said:
I read somewhere in the past about using one of those GPS windshield (glass) mounts for installation.
It worked like a charm for me. What you do is stick the mount in the center of the tempered glass protector.. and drop it onto the screen. It's much easier to place perfectly and no accidental fingerprints along the edges.
Click to expand...
Click to collapse
can you please elaborate? or link a vid? much appreciated
vaibhav.ravi said:
can you please elaborate? or link a vid? much appreciated
Click to expand...
Click to collapse
This video is for an iPad, but it should really visualize it for you: http://www.youtube.com/watch?v=T24l1wkB00s
I had a feeling suction cups like those might be hard to hold onto, so applied my tempered glass protector using the same method and a GPS mount
otaofans said:
This otao quality is high. You can see this one. I have bought this protector for my smartphone about two months. It still working well. I post my Attach Files for your reference.
Product list here:
1 xOTAO X-Lambo tempered glass screen film
1xInstructions frontage
1 xInstructions opposite side
1 xwet-dry cleaning pouch ( patent item:201320449448.2)
1 xEASY metal home button sticker (Aluminium alloy stripes textures )
1 xNano micro-fiber cleaning cloth
1 xAnti-static dust sticker
1 xModify sticker
Click to expand...
Click to collapse
This thread was about how you should apply a tempered glass protector.. All I can see is you suggesting to buy a new screen protector.
Besides that, you do realize that this thread is over 3 months old, right?
Otaofans only makes posts that promote the oato screen protectors. And for that reason alone I vote that none of us ever buy an oato product. Who's with me?
And report as spam...
Sent from my Nexus 5 using Tapatalk
I ended up with few of the small spiderweb bubbles under my Nilkin screen protector I installed last night. A few along the very top edge of the glass, and a few at the bottom. I am currently trying the binder clip with micro-fiber cloths trick to apply pressure and remove them. If that doesn't work, I saw a mention of putting the phone in a plastic bag and using a vaccuum hose.
1.) Has the vaccuum trick worked for anybody here.
2.) I got to thinking about this. I have a foodsaver vaccuum sealer for storing food. Would this do a better job of pulling out the bubbles since it creates a better seal?
I don't see how it could hurt the phone in any way. Others thoughts on this?
-Jeremy
What i would suggest :
Clean the screen with piece of cloth ( Mostly comes with the package)
Get some tape 2 pcs...
place one on the top of the screen protector , and pull it slowly to remove the screenprotector
get the other piece of tape and tape it around ur finger (Inside out) now with 1 finger u would pull the screen protector up
and with the other u would tap the screen where the bubbles are , this will make the bubbles go away!
Then just replace the screen protector and remove the tape, DONE!
PS: If this didn't help , then send your device to me i will fix it for free :good:
Bubbles are created by dust on the screen. I read someone suggest lift the protector with one piece of sticky tape then use another to remove the dust from the screen and protector. Do this for each bubble
Edit. Crap. Teaches me not to read the replies
Sent from my Nexus 5 using Tapatalk
Blowtorch em off
Sent from my Nexus 5 using Tapatalk
Assuming its not dust....just a bubble, like the huge one to the right of the led notification ....I used a thin cloth and an adjustable wrench and tighten the wrench firmly on the bubble...with the cloth protecting the phone of course. In 20 minutes per bubble....I had none. Gone for good.
Mime ghost glass BTW.
Sent from my N5 cell phone telephone....
I would suggest not doing it during night time. Do it on a very illuminated area. Clean with the provided cloth uniformly until looks perfect. I my self always blow the screen during the sticking process and never get dust between screen and protector. If any bubble, sweep it with a credit card before removing the top layer.
As someone said once you have them its a fail. I use the glass ones I know they crazy prices but I do the steam room bit and drop them on. No bubbles.
Sent from my Nexus 5 using XDA Premium 4 mobile app
You may (or may not) have noticed it is easier to apply screen protectors at times; you could apply them all day flawlessly, and other days they just don't play ball. The reason is humidity! The more humid the environment the less chance there is of dust particles wizzing around. Typically this will be summer here in the UK where its gets really humid. To replicate the humidity in colder climates / seasons, you can run a hot shower or bath and let the bathroom steam up. The screen protector should apply perfectly there, but you don't want to spend to long there with your precious phone, condensation and all. You could also try bowls of steaming hot water around the area you're going to be applying the screen protector in.
Be sure to apply common sense before applying the screen protectors if you're going to be using the above mentioned methods and the usual rules apply, clean the screen etc before hand.