Related
So today I receive my Clear Smoke Snap On Case from DAYDEAL.COM on Ebay. I always like the smoke look on my phones when purchasing a case, so my decision was no different this time around. The case overall does not restrict the phone functions or slide out keyboard. Phone is protected well from the top and bottom, sides vary because of the large volume key on the phone. The case is more design to protect your phone from scratches, nicks, and knee height drops. Personally I believe major drops like, phone falling when leaving your car, might be pushing it. Case does fits well onto the phone, so you don't have to worry about it falling apart when in use.
Overall I give case a 8/10 base on value, minor protection, and overall design and look on the phone.
I have posted some pictures on my gallery using image shack, see below.
h t t p://img443.imageshack.us/gal.php?g=clearsmokecase.jpg
http://img443.imageshack.us/gal.php?g=clearsmokecase.jpg
Thank you
Thanks for including the pics!
I just have a couple questions:
How much bulk does it feel like it adds to the phone?
Does it collect a lot of finger prints?
Troggie81 said:
Thanks for including the pics!
I just have a couple questions:
How much bulk does it feel like it adds to the phone?
Does it collect a lot of finger prints?
Click to expand...
Click to collapse
I can answer your second question without a problem, I work doing vinyl manufacturing so grease, dust, and dirt are a daily routine for my phone. So far it has pass the test with two days under these conditions, NO PRINTS, scratches, or stains. Adds no bulk what so whatever, which is a plus. Only complaint is that it's really hard to take off, but that's a good thing also.
Where you get it?
Edit:nvm found out
Sent from my HTC Vision G2
I have the clear version of this... well the place where I got my phone provided me one for free. It's pretty decent for free... as with all cases it'll make your phone look prettty lame but that's the price for protection.
Easy put on, the part that is on the screen is easily taken off but the part attacked to the keyboard and battery are a little harder.
Just got this from daydeal and got to say its fantastic for the price better than the seidio one I had for my milestone thanks op
Just received mine today. Most cases look pretty stupid but I think the "smoke" appearance to this unit actually make the whole thing look pretty nice.
Have the same (?) model and my experinence is the same. The phone feels really protected, but adds bulk and makes it look a bit silly. Almost feels like my old SE P990.
Still it fits snuggly and can't think of a better solution if one wants more than scratch protection.
very competitive with otterbox, but with grat designing
https://www.case-mate.com/HTC-Desire-HD/Case-Mate-HTC-Desire-HD-Pop-Case.asp
Nice I need to order
Looks very nice indeed! Might have to get one too, to interchange with my Otterbox case.
Though ive got a slight worry that glossy black will scratch like a motherducker in no time.
If anyone gets one can you post some pictures and maybe a video too? Curious to see what that plastic is like. Cheers!
I was gonna go for a casemate tough, but I think I might wait for this, looks very nice.
Just pre-ordered one from here:
http://www.htcdirect.co.uk/index.php?main_page=product_info&cPath=2_12_80&products_id=978
Sent from my Desire HD using XDA App
the back looks great, but too chunky around the screen...
panyan said:
the back looks great, but too chunky around the screen...
Click to expand...
Click to collapse
agree but there is no alternative better
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
bobbyphoenix said:
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
Click to expand...
Click to collapse
Sounds great, be sure to take lots of pictures.
Results are in!
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
bobbyphoenix said:
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
Click to expand...
Click to collapse
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
PeatCoal said:
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
Click to expand...
Click to collapse
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
bobbyphoenix said:
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
Click to expand...
Click to collapse
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
PeatCoal said:
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
Click to expand...
Click to collapse
Well as luck would have it I have one of those on the way too. I'll do the same kind of review when that one comes in. Can you tell I love cases?
bobbyphoenix said:
Can you tell I love cases?
Click to expand...
Click to collapse
..nope
I look forward to it
Nice review ordered mine too just now.
Sent from my Desire HD using XDA App
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
psych0t1c said:
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
Click to expand...
Click to collapse
The shinny black part is very hard plastic, and since the very soft gray part is fused to it, it is really really hard to get in and out. I almost feel like if I push any harder I'm going to break one or the other, but the soft part is just soft enough to get it in there. I don't see how it could get easier over time. It's one of those cases that once it's on, it's on for a long long time. Compared to the OtterBox Commuter case that one seems like it can fall off, and the Pop case seems like it was actually made into the phone, and not to come off without a struggle, but if I had to make a choice I would pick the Pop case 100% of the time. Again if you compare them side by side the OtterBox looks like it was made for a kid to play with, and the Case-Mate one that you buy tickets to see it in a museum. It is that good!
Thanks a lot for the quick reply mate. I was thinking that maybe one could cut or file down one of the plastic ridges that snap into place around the screen to hold the device.
I done that ages ago on a case for a XDA mini, and it worked quite nicely but obviously there is a thin line between making the in and out easier and making the case unusable by cutting in too far...
Again thanks for your input...
...this chunk of zeroes and ones has been generated by flashing a 400 Watt halogen bulb into the open fibres of a transcontinental communications cable...
Thank you for good products to introduce.
Hey everyone, I'm back with another review. This case caught my eye and I had to own it...immediately. The first case that I actually *wanted* to own. Honestly it wasn't perfect based on the pictures. It is a flip case made in the style of a book. Bookbinding is one of me hobbies and I thought that it was very fitting. So, here is my review. [EDIT] I must have misread the page, I read it was genuine leather, but it is leatherette, and that is why it smells so terribly.
Amazon Link: Boxwave book case (leatherette)
PRO's:
It fits nearly perfectly
Provides adequate protection for the body/screen with one flaw (see cons)
It has enough space for 6 cards (doubled in each pocket) and space behind the cards for a few folded bills.
CON's:
Smell. holy mother of god was this smelly when I took it out of the plastic bag. I choked a little and had to let it air out outside for a day before it was bearable to use in the house. (yes, that bad) and it still has a scent.
Volume. While it doesn't add much weight at all for the size of the phone and case, it does add a lot of thickness. Though it does look exactly like a book, so I guess that is expected. Might be more of a casual case for use in a backpack or purse, so maybe not a con, for you but for me I use my phone in my front pocket.
The card slots are made of something other than leather and it left greasy marks on my xtremeguard screen protector. Not sure if it was because I left it outside over 24 hour period or if that is how they are in general. Your choice.
The volume and lock buttons are a little cramped, though the case holding the phone in place is actually really thin and easily pressed still. Just something to note.
Overall I would say the my desire to own this case has given me a little favoritism in my review. I honestly LOVE how this looks and wish more companies would make them. A really unique design for this unique phone. If you love having something that 90% of the people owning a Galaxy S4 won't have ever heard of, then this case if for you. Everything works nicely and is cut nearly perfectly. a solid 4*/5* for this one for me. Photos and *maybe* a video. I'm just getting started with reviews and I am not use to talking to a camera instead of typing reviews. But tomorrow photos will be uploaded and posted. (batter dead on camera!)
I forgot the pictures! :victory:
Review update: I love the way this case looks as I have said in the previous post, but I want to add that the fact that you cannot use a plastic screen protector on your phone without modifying the case. For this alone I would give the case a new 2*/5* It just isn't worth the problems...but it does look awesome...
I had to take the pockets out of the case because of a problem with them sticking to my screen protector which screwed up two of them before I found out the reason behind it was the adhesive they used to keep the leather attached to fabric inside on the actual pocket.
you can see the line of adhesive here.
Problems with the case that holds the phone on. It has cracked in the upper right and bottom left corners and I have not dropped the phone, either in the case or out, there is no reason for it to be breaking yet. Waste of money I think. I'm going to be sending an e mail to box wave tonight.
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
Rhamza161 said:
Problems with the case that holds the phone on. It has cracked in the upper right and bottom left corners and I have not dropped the phone, either in the case or out, there is no reason for it to be breaking yet. Waste of money I think. I'm going to be sending an e mail to box wave tonight.
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
Click to expand...
Click to collapse
Did you get a response? I was looking at one of these myself because I want a good wallet case with the clear space for the ID, and those are hard to find.
Anyone using one of them? Interested in purchasing one, curious to hear feedback from someone using one.
Sent from my SCH-I545 using Tapatalk 2
i ordered one on friday, so i should be getting it in a few days. i've heard nothing but great things about it, so i have high hopes. i'll let you know what i think, and i'll take some pictures (i got the green one and i have a white s4).
shibbnasty said:
Anyone using one of them? Interested in purchasing one, curious to hear feedback from someone using one.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
I have it and love it. I had it on the S3 and they have increased the quality and usability with the preview window and the ability for it stay flipped out without it flipping back to closed due to design. The fact that you can answer calls with it closed is awesome.
oppis300 said:
I have it and love it. I had it on the S3 and they have increased the quality and usability with the preview window and the ability for it stay flipped out without it flipping back to closed due to design. The fact that you can answer calls with it closed is awesome.
Click to expand...
Click to collapse
I was talking about the full case from Samsung not the s view cover. I ended up picking up the light blue one from a local best buy. Only had it on for an hour or so but I have to say I'm really liking this case. Doesn't add Much weight or bulkiness to the phone and still feels very solid. Pretty impressed.
Edit: my only gripe so far is that the headphone cut out is a little small. Headphones with a straight plug work just fine but if they have a curve they don't fit into the slot... kind of a bummer as I use an auxiliary cord in my car.
Sent from my SCH-I545 using Tapatalk 2
Review
I have this case for over a month now, and I'm pretty much happy with it. The only thing I didn't like was that here in Saudi Arabia, only 3 colors were available for sale, Blue, White and Pink. I know there is a Black/Dark Grey variant of this protective cover but unfortunately it's not available here.
Here is a simple review that I manage to put:
Official Samsung Protective Cover+ for Galaxy S4
Pros
A simple yet functional design.
Protects the whole back and sides of the phone without the bulky appearance and feel.
It also protects the glass cover of the primary camera by giving it a few millimeters of clearance from the back.
Sturdy back, conforming and flexible sides for easy installation and removal.
The cover for the Volume Rocker and Power Button is soft and easy on the fingers. Doesn't give that rigid feel like other cases on the market.
There is an available slot if you like putting a hand or neck strap on your phone.
Cons
There is a little bit of space between the phone and the case, and if left unattended, dirt may settle-in. At least monthly, remove the phone from the case and clean it with a soft moistened piece of cloth with a non-alcohol based cleaning solution.
Paolonicus said:
Here is a simple review that I manage to put:
Click to expand...
Click to collapse
wow, that blue is lighter than i thought it would be, which is a good thing. as i mentioned before, i ordered the green. i'm really hoping it's a lighter green (almost lime), because that's the color of case i'm looking for.
high kick said:
wow, that blue is lighter than i thought it would be, which is a good thing. as i mentioned before, i ordered the green. i'm really hoping it's a lighter green (almost lime), because that's the color of case i'm looking for.
Click to expand...
Click to collapse
I seen the green one in the store and its definitely a lighter green almost lime but not quite.
Sent from my SCH-I545 using Tapatalk 2
A top notch case! I had one for my note 2 which had a gloss but the one for my S4 is a flat sheen (Navy). Among the best cases I have used for my phones.
Sent from my GT-I9505G
planoman said:
A top notch case! I had one for my note 2 which had a gloss but the one for my S4 is a flat sheen (Navy). Among the best cases I have used for my phones.
Sent from my GT-I9505G
Click to expand...
Click to collapse
I have to agree, after using it for around 6 hours now I am very satisfied with it. I like how its not bulky, yet still seems very sturdy.
Sent from my SCH-I545 using Tapatalk 2
mine came in the mail today. i gave my little mini-review of it in another thread, so this is just copy and pasted:
this case definitely lives up to all the hype i've been reading about it. the buttons respond really, really well; and it's a nice combo of soft materials on the sides and a hard plastic back. if the green was more lime (or neon), this would be my daily driver without a question. since my "negative" isn't even really a negative, i would highly recommend this case.
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
I ordered one and hopefully get it by Friday/Saturday. No prime shipping with this purchase unfort.
Would be interested to know if the case blocks the speaker on the phone or it routes the sound toward you. It looks like it could be routing the sound from the speak to the 2 holes at the bottom.
Bigdny said:
I ordered one and hopefully get it by Friday/Saturday. No prime shipping with this purchase unfort.
Click to expand...
Click to collapse
Please let us know how it is. It looks pretty decent, hope it's not that bulky. Thanks
Sent from my PH-1 using Tapatalk
It seem that parts of the case are metal(aluminum?) and I hope this case won't make cell reception even weaker than it already is.
dandan2980 said:
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Xela19115 also mentioned the case here a few days ago. Looks like a tank itself.
dandan2980 said:
https://www.amazon.com/gp/aw/d/B078...phone+case&dpPl=1&dpID=51x55EIMEDL&ref=plSrch
Looks pretty sweet, just came across this case on Amazon
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I may order when someone else serves as the test subject.
I'll stay tuned to see how other folks like it.
I ordered this case and immediately had horrible signal issues. I've e-mailed the seller asking if there's a solution. It's too bad to use as a phone, though wifi was not blocked at all. Normally I have strong LTE in my house but it's unusable with the case on.
Marvel should sue them for stealing Spiderman design (j/k). Only if this case had a belt clip, I'd bite. I want someone to make a case with a clip!
goldentequila said:
Marvel should sue them for stealing Spiderman design (j/k). Only if this case had a belt clip, I'd bite. I want someone to make a case with a clip!
Click to expand...
Click to collapse
They already have some cases with holster and belt clip on Amazon.
Sent from my ONEPLUS 3T using Tapatalk
to each their own... but gawd, that's ugly.
I bought it when it first went up, before their description made it clear it was steel, I was hoping for a thin metal slip. The case is heavy as hell, and the built in screen protector traps pocket lint between the screen protector and screen. The case is held on with 6 hex screws, which worked, but made it even heavier.
It did muffle sound a little, as to radio...I'm just switching to Ting with GSM from Sprint with my phone. I was worried for a bit that my phone was the issue, but a girl who has a galaxy phone has all the same signal issues I did on Sprint. I'll let you know of mine is better, and how GSM is impacted by the case later.
---------- Post added at 09:15 AM ---------- Previous post was at 09:10 AM ----------
I should also mention, like the Tudia, it made my side access worse. I use Lucid launcher specifically for the left side slide out favorite apps, these were really hard to activate on both this case, and the Tudia. I also use a pie fromthe right side, this was similarly hard to trigger, but at least I could customize the trigger width to accommodate the massive bearth.
Here is another new case on Amazon.
https://smile.amazon.com/gp/product/B07C4YVM6V/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
Anyone seen it? Have it?
(Fixed the link)
tech_head said:
Here is another new case on Amazon.
https://smile.amazon.com/Essential-...696&sr=1-1-spons&keywords=essential+ph-1&th=1
Anyone seen it? Have it?
Click to expand...
Click to collapse
The shortcut leads to the phone rather than a case.
jhs39 said:
The shortcut leads to the phone rather than a case.
Click to expand...
Click to collapse
Fixed
https://smile.amazon.com/gp/product/B07C4YVM6V/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
That doesn't look like a quality case to me. The back looks like plastic. But there aren't a lot of cases compatible with the 360 Camera so if you want specifically to use that feature it's probably worth taking the chance since the case is so cheap. But if you don't care about the 360 Camera there are clearly way better choices.
jhs39 said:
That doesn't look like a quality case to me. The back looks like plastic. But there aren't a lot of cases compatible with the 360 Camera so if you want specifically to use that feature it's probably worth taking the chance since the case is so cheap. But if you don't care about the 360 Camera there are clearly way better choices.
Click to expand...
Click to collapse
I bought it.
It actually isn't cheap feeling.
Soft touch.
Pretty heavy.
Secures on the phone pretty well.
Looks like it will protect the phone in a drop.
It does add bulk.
The flip down for the camera is pretty cool.
The opening on the back for the camera is large since the case is so deep.
The fingerprint sensor hole is also large because they made it to clear the camera opening without leaving a small piece of TPU inside.
Overall I like it for the ~$10 I paid.
It is either this or naked.
I bought it as well.
Doesn't feel cheap to me.
Adds a decent amount of bulk to the phone but not too much.
The flip down feels pretty sturdy and hopefully it won't loosen over time.
It has a nice feel to it. Soft but not slick. Sort of rubberized.
I've been using the first Tudia case that came out for this phone for awhile now and it's fine most of the time. But when I do use the 360 lens it is a hassle. Having to peel the case off. Hopefully this fixes that problem.
ryaleon87 said:
I bought it as well.
Doesn't feel cheap to me.
Adds a decent amount of bulk to the phone but not too much.
The flip down feels pretty sturdy and hopefully it won't loosen over time.
It has a nice feel to it. Soft but not slick. Sort of rubberized.
I've been using the first Tudia case that came out for this phone for awhile now and it's fine most of the time. But when I do use the 360 lens it is a hassle. Having to peel the case off. Hopefully this fixes that problem.
Click to expand...
Click to collapse
I tried it yesterday and the flip down works fine.
It's a bit stiff to latch and unlatch, but it does solve the 360 camera issue.
No more case removal! It also means that those screen protectors that glue around the edges will bel see likely to lift.
I still haven't decided if I want to use LOCA to attach a screen protector to my phone.