I have try to flash the unofficial rom. However, the phone rebooted during the update process. Now, my Acer s200 only can display the splash screen and cannot go into windows...
Anyways can flash the rom again?? I tried to use Acer_EUU.exe, but it need to detect the phone by Activesync. Anyways can flash the rom bypass activesync?
Some problem....
Hi!
I tried to flash from original EN ROM version on RU version and had the same problem - the device displayed Windows splash screen and then just reboot. So, I was confused but I didn't stop this process and after half an hour Windows loaded...(during this time I removed he battery and pushed soft-reset button a lotof times).
So, my only advice is to try to wait with re-booting device till the Windows boot and then to flash the original ROM (if you'll find it).
For me - after I loaded RU version of Windows I just flashed for custom EN ROM and it was OK (without this issue).
Good Luck!
It solves your problem..
DimICE said:
Hacked ACER_EUU.exe
Link: http://www.mediafire.com/?wy2yynnjz2z
ActiveSync connection is not needed!
Also is not needed to edit version.txt..
Just replace original ACER_EUU.exe with this file, execute it. Press next,next,ok,ok.. Message "Waiting for download mode coming" appear..
Power your Acer s200 with Power+Camera buttons pressed and connect to computer.
Tested on 2 acer s200 phones
Sorry for my English)))
Click to expand...
Click to collapse
link not working ( http://www.mediafire.com/?wy2yynnjz2z )
http://dimice.ru/ACER_EUU.exe
Rom update can be computer's fault
DimIce's program works perfectly. I've thought I bricked my phone many times, but always have been able to recover. This is what I recently discovered. In the middle of a flash, my computer said "write error". 'Thought my phone would stay dead. Finally, I switched to another computer and flashed the phone with no problem. So if you suffer a bad flash, simply change computers. If none is available, reboot your computer to clear the memory, etc. (by the way I'm using Windows 7 x64) and try again - sometimes even changing the USB port might help. The phone excels in it's ability to be re-flashed -even if you suffer disaster in the middle of a procedure.
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
orb3000 said:
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
Click to expand...
Click to collapse
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
rafyvitto said:
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
Click to expand...
Click to collapse
If you have any problem please take it to the council.
my only intention is to let new members know that this is an HTC forum only!
So they don't waste their time
If that bothers you, shame...
XDA has never meant to be HTC only.
Just open your eyes, dear sir.
I have a problem with the installation romu message pops up to me(sorry acer usb host driver must be installed in windows xp sp2 or later version please update os version to windows sp2)
stuck on clean boot screen
Hi, i was updating from EUU_Acer_S200_3.003b.00_EN_03.03.08_3.003.01_20100119 to EUU_Acer_S200_3.003c.00_ES_03.03.08_3.003c.00_20100201 but accidentally closed the acer's application, so the phone is stuck on "clean boot" screen? what should i do?, thank you!
I have gone through about 3 methods on how to do this and i just cant get it right.
I have used universal AndRoot and have managed to use the Better Terminal to get access , but as soon as i try and boot my phone into recovery it just pops up with a Yellow Triangle with an exclamation mark in the middle, and it just stays there until I pull out my battery.
I also want to add that i want to update my phone to the new android version of 2.2 , so how will i get from v 1.5 to v2.2
I have an :
Android HTC Hero
Firmware Version 1.5
Software Version 1.0.0.A6288
Please Help me!!!!!!!
Hello to all, this is my first post.
I'm quite desperate here.
I do common pc/iphone service.
A client brought to me an HTC Magic on which he had tried to upgrade to 2.1 without success, being able to boot only in recovery mode (pressing Home while booting).
Being a total noob on android stuff (I'm an iPhone expert/developer) I figured I should follow some process to restore the phone to factory , android 1.6 condition, and then try the known tools to root it / update to 2.1 from what I could find by googling.
So I installed the android sdk on my PC, and followed the google-io-device guide to try to restore to 1.6.
Right after I installed the radio update, the phone doesn't boot, it gets stuck on the 3-android-robots-on-skateboards screen (I guess its the boot logo) and the recovery method doesn't work.
So I'm asking for your expertise here.
Is there any simple (or simply followed) way to /at least/ boot the phone?
Thank you all in advance,
Limneos
iPhone Dev - ScrollingBoard/SBRotator etc.
Good morning!
I hope this Forum is the right one for my question. If not please move my post
Id love to have Android working on my HD2. But I had trouble getting it working. I googled, if read and tryed this and that but nothing helped
First I downloaded an official old ROM from HTC to get an older SPL. Than i installed HSPL to my HD2. After that i installed MAGLDR 1.11. Tha Flash-Tool told me the installation was sucsessfull. But When my HD2 rebooted it hangs at the HTC-Logo. Also the "quitly brilliant" isn't to see. MAGLDR isn't starting. Also inf i Press and Hold the on/off button it isn't starting. I googled the night away, but i found nothing. Maybe someone can tell me how to do it or whre to search for the answer? Thank you very much!
Ok, Problem solved. I don't know what i did wron... I tried it again and now it works...
can you please tell me what you did to solve the problem?
I have the exact same problem, after MAGLDR 1.12 installed successfully, the phone hangs at HTC logo and i really dont know what to do now....
If anyone can help it would be greatly apreciated.
I have a Problem installing the MAGLDR into my HTC HD2 because when i excute the MAGLDR the cellphone stop in 0%
I need help
Hi guys,
I bought my P6810 equipped with the 3.xxx version.
I first upgraded to the 4.0xxx
I then upgraded to the 4.1xx version, and a little while ago I upgraded to the 4.2.2 version.
I then started to have problems with my emails and also started to have memory issues (not installing upgrades because of apparent memory shortages...
So I wanted to revert to a previous version. I must have made a mistake. Now it starts up until I get the Samsung (glowing) lettering and then it stalls (but the processors though because the device turns rather hot locally).
Is there any way I can start from a clean slate ? restarting the device and rebuilding the OS from scratch ?
This all would not have been necessary had Samsung brought out the upgrades they were supposed to and had they delivered some good software befitting their very good device !!!
Any help ? otherwise my device is for the dirtbin...
Complete new installation
Hi, is there really no one that can help me?
To reinstall a pc you start off by partitioning, formatting, installing the OS,...
But how to do this with a Android tablet?
My device boots, shows the swirling logo and then switches to the glowing Samsung logo, only to stall there until the battery runs out.
I have tried reinstalling a original and stock android version several times using odin, to no avail.
I don't know what else to do.
Please, help anyone?
Kind regards,