Database Info

Not enough room to update app?

I'm trying to update a LWP from the market but after it downloads it says it can't install due to 'insufficient storage'. I have roughly 45-47 apps (this includes apps, skins for better keyboard, and LWP's) after deleting a few apps and I still get this error. Any idea why? I'm holding off on going the APP2SD route until after the official 2.1 is released and our devs make it worthy of installation.
Under 'running services' it says: Avail 48mb+0.00b in 8 Other 0.00b in 4
In 'internal phone storage' it says: 19.02mb available
Currently running Fresh 2.0d
Also, does anyone know why Keepscreen from the market runs at startup? I only want to use it with Google Nav, which isn't often, and it bugs me that its in running services at every boot. If this cannot be adjusted, what similar app is out there than only runs when needed?

google nav stays up on its own for me, check the settings. And you may be out of room in the dalvik cache or the data/data section. Had that problem, so I enabled a2sd for dalvik cache, and no prob now. Running 102 apps, showing 88mb free internal storage.

Well I tried clearing cache using cachemate, cleared dalvik in recovery, and deleted 3 games bringing my available internal storage to 35mb and still can't update the LWP that has the update available.

Why isnt a2sd worthy of installation?
we had it on 1.5 with source and everything to it.
Its the same thing on 2.1, nothings changed.
The Only change would be on 1 rom that can use ext4 now.
When 2.1 is released a2sd wont be changed.

I get this error with handcent updates on fresh 2.0d also. After it errors I have to go into recovery and "fix apk uid" mismatches or i cant install it. Also i am using a2sd 2.5, Probably of no help, just sharing.

I had the same problem with 2 apps I tried to update and got out of memory errors.
I used root explorer and went to /data/data and deleted the app, after that I was able to install.

Jus10o said:
Why isnt a2sd worthy of installation?
we had it on 1.5 with source and everything to it.
Its the same thing on 2.1, nothings changed.
The Only change would be on 1 rom that can use ext4 now.
When 2.1 is released a2sd wont be changed.
Click to expand...
Click to collapse
Oh its worthy, I made sure to buy a class 6 to use it. I just don't want to go through the trouble of setting it up until we get an optimized official 2.1 so I can format my card and get everything set so I don't have to make any big changes. I'm a bit burnt out from the dozen 2.1 flashes of different roms.
bobr0949 said:
I had the same problem with 2 apps I tried to update and got out of memory errors.
I used root explorer and went to /data/data and deleted the app, after that I was able to install.
Click to expand...
Click to collapse
I just saw an update for another app and it worked, but still not the LWP. I uninstalled/reinstalled and everything is ok now. Go figure. My phone was also being really slow and a lot of processes were stalling after wiping dalvik but seems like its behaving now.

[MOD] DarkTremor (DT) a2sd on Synergy and Kingdom ROMs

I mucked around with an updater script for Synergy last night to replace the built in CM A2SD with DT A2SD. It works. I've tested this on Nightly 6/15 and Nightly 6/16 and it works flawlessly. This should work with ANY ROM that uses the built-in CM A2SD, but I've only tested on Synergy. Let me know and I'll make changes here and there, but my main goal is having this work on Synergy, so I'm not going to be super supportive of other ROMs at the moment.
First of all:
All credit for DT a2sd goes to TKirton. I did NOT write the DT a2sd script. I just modified it to work with Synergy.
Update:
Tested successfully on Virus' Kingdom Revolution B1.3
Update:
This script will now automatically wipe Cache and Dalvik-Cache
What I did:
I updated (and re-signed) the original DT install script. It now looks for the presence of CM A2SD and removes it before installing DT. This is what was causing bootloops when trying to install it after a Synergy installation: The two A2SD programs were conflicting.
I have tested this on a wiped/fresh install as well as an install where I've completely set up the ROM (restored apps, set them up, etc) to my liking, and I had no issues.
Instructions:
NANDROID NANDROID NANDROID...I can't stress this enough. Just because it worked for me doesn't mean it will work for YOU (I can't see any reason why it wouldn't but better safe than sorry).
I have successfully installed this immediately after flashing both Kingom and Synergy ROMs before the first reboot. Your mileage may vary. Some ROM's need to boot once to set everything up which is why I suggest booting it the first time and THEN flashing the zip, but at least on Synergy and Kingdom it doesn't seem to be necessary.
Fresh install:
1. Flash Synergy
2. Let it boot. Set up your google account (or not if you want to do it later, it doesn't matter.)
3. Reboot into recovery and flash synergy-dtapps2sd-2.7.5.3-beta04-signed.zip
4. Reboot.
5. Your phone may reboot once or twice. You're not boot looping I promise.
6. Once it comes up you can check the installation by going into terminal (or adb shell) and typing 'a2sd check'. If the a2sd check screen comes up you're all set.
Installing after your ROM is set up:
1. Boot to recovery
2. Wipe cache and dalvik-cache (no longer necessary)
3. Flash synergy-dtapps2sd-2.7.5.3-beta04-signed.zip
4. Reboot
5. Your phone might/might not reboot a couple of times.
6. Once it comes up you can check the installation by going into terminal (or adb shell) and typing 'a2sd check' as above.
Usage:
Type a2sd help to get a list of commands. Some useful ones (to me) are:
a2sd cachesd (moves dalvik-cache to SD)
a2sd cachepart (moves dalvik-cache to /cache)
a2sd nocache (moves dalvik-cache to internal storage)
a2sd zipalign (performs a zipalign at boot time)
a2sd heapsizexx (changes the system heapsize. a2sd heapsize32 for example will make your heapsize...you guessed it, 32mb)
Those are the ones I'm mainly using. You can get the full list (including memory killer settings and such) by doing a2sd help from terminal or adb shell.

I found this after I already installed everything and set up my nightly 6/16. I still just nandroid'd and flashed it anyway... hope it works... haha...

Looks like it worked, from what you posted in Myn's thread. And that's the whole idea: You should be able install it whenever you want, in case you decide to tweak things after you have your ROM set up the way you want it. This method means not having to wipe/reinstall, which is a big plus as far as I'm concerned.

Gonna give this a try when once I Nand and switch to Synergy.
p.s. I'm in 19720 everyday. lol

boostedeg said:
Gonna give this a try when once I Nand and switch to Synergy.
p.s. I'm in 19720 everyday. lol
Click to expand...
Click to collapse
Let me know how it goes. I updated it so it wipes cache and dalvik for you.
And I'm in 19701 now...gotta change that info. That's cool though.

Successfully tested on Virus Kingdom B1.3

I'm new at this stuff. Is this better than what is native in the rom? Make it run better? Thanks
Sent from my PC36100 using XDA App

chrisfales said:
I'm new at this stuff. Is this better than what is native in the rom? Make it run better? Thanks
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
The rom comes with dalvik-cache set up on the SD card. Flashing this moves it back to internal storage. It's a trade-off really. You'll lose about 130mb on /data, but you'll gain some speed.
Having said that, if your ROM is running quickly enough for you and it's stable...and if you don't feel the need to tinker with memory settings and such...leave it as it is. I never mess with something that's working for me. ("If it ain't broke, don't fix it.")

I've noticed the Synergy updater has a beta 5. What's the difference? Apologize but I didn't get a chance to read through all the posts on the warm 2.2 thread.

gqukyo said:
I've noticed the Synergy updater has a beta 5. What's the difference? Apologize but I didn't get a chance to read through all the posts on the warm 2.2 thread.
Click to expand...
Click to collapse
It's the same thing. I forgot to change the name of it when I uploaded it here.
Edit: Changed it here as well.

I will be running this shortly and will report back.

smw6180 said:
I mucked around with an updater script for Synergy last night to replace the built in CM A2SD with DT A2SD. It works. I've tested this on Nightly 6/15 and Nightly 6/16 and it works flawlessly. This should work with ANY ROM that uses the built-in CM A2SD, but I've only tested on Synergy. Let me know and I'll make changes here and there, but my main goal is having this work on Synergy, so I'm not going to be super supportive of other ROMs at the moment.
First of all:
All credit for DT a2sd goes to TKirton. I did NOT write the DT a2sd script. I just modified it to work with Synergy.
Update:
Tested successfully on Virus' Kingdom Revolution B1.3
Update:
This script will now automatically wipe Cache and Dalvik-Cache
What I did:
I updated (and re-signed) the original DT install script. It now looks for the presence of CM A2SD and removes it before installing DT. This is what was causing bootloops when trying to install it after a Synergy installation: The two A2SD programs were conflicting.
I have tested this on a wiped/fresh install as well as an install where I've completely set up the ROM (restored apps, set them up, etc) to my liking, and I had no issues.
Instructions:
NANDROID NANDROID NANDROID...I can't stress this enough. Just because it worked for me doesn't mean it will work for YOU (I can't see any reason why it wouldn't but better safe than sorry).
I have successfully installed this immediately after flashing both Kingom and Synergy ROMs before the first reboot. Your mileage may vary. Some ROM's need to boot once to set everything up which is why I suggest booting it the first time and THEN flashing the zip, but at least on Synergy and Kingdom it doesn't seem to be necessary.
Fresh install:
1. Flash Synergy
2. Let it boot. Set up your google account (or not if you want to do it later, it doesn't matter.)
3. Reboot into recovery and flash synergy-dtapps2sd-2.7.5.3-beta04-signed.zip
4. Reboot.
5. Your phone may reboot once or twice. You're not boot looping I promise.
6. Once it comes up you can check the installation by going into terminal (or adb shell) and typing 'a2sd check'. If the a2sd check screen comes up you're all set.
Installing after your ROM is set up:
1. Boot to recovery
2. Wipe cache and dalvik-cache (no longer necessary)
3. Flash synergy-dtapps2sd-2.7.5.3-beta04-signed.zip
4. Reboot
5. Your phone might/might not reboot a couple of times.
6. Once it comes up you can check the installation by going into terminal (or adb shell) and typing 'a2sd check' as above.
Usage:
Type a2sd help to get a list of commands. Some useful ones (to me) are:
a2sd cachesd (moves dalvik-cache to SD)
a2sd cachepart (moves dalvik-cache to /cache)
a2sd nocache (moves dalvik-cache to internal storage)
a2sd zipalign (performs a zipalign at boot time)
a2sd heapsizexx (changes the system heapsize. a2sd heapsize32 for example will make your heapsize...you guessed it, 32mb)
Those are the ones I'm mainly using. You can get the full list (including memory killer settings and such) by doing a2sd help from terminal or adb shell.
Click to expand...
Click to collapse
Do you have to have your SD card partioned before you run this?

Adam1422 said:
Do you have to have your SD card partioned before you run this?
Click to expand...
Click to collapse
yes ;0 do it now

Ive used the dt script since I flashed us this thread any different then the cm or did I miss something in the op.
Confirm on b1.3 and works with GUI from market as well
Sent from my PC36100 using XDA Premium App

Used it with kingdom sacs v7 port. Boot loop after wrote a2sd datasd. Wipe dalvik cache and boom.. !! it booted and i got 100mb more free ram. Strange, but have no problem until using it about 20 hours.
Sent from my PC36100 using XDA Premium App

snxxxxx said:
Used it with kingdom sacs v7 port. Boot loop after wrote a2sd datasd. Wipe dalvik cache and boom.. !! it booted and i got 100mb more free ram. Strange, but have no problem until using it about 20 hours.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Do you really have to partition? That may be a problem. I formatted my phone installed synergy restarted, wiped delvick then flashed the zip, and it installed. When the phone booted, I ran titanium to restore apps, and ran out of space. I dont think it worked right.

Successfull test!
Works great on 6/23 aka b1.4 kingdom! Love it! Unfortunately it doesn't work at all on new synergy-kingdom hybrid. That's ok, I like kingdom better anyway! Anyone have wake lock issues in 1.4 using this? Pri is 1.77 but still wakelocked after dalvik move

a2sd cachesd (moves dalvik-cache to SD)
a2sd cachepart (moves dalvik-cache to /cache)
a2sd nocache (moves dalvik-cache to internal storage)
a2sd zipalign (performs a zipalign at boot time)
a2sd heapsizexx (changes the system heapsize. a2sd heapsize32 for example will make your heapsize...you guessed it, 32mb)
What are the advantages of each one of these? Should I move dalvik-cache to sd,cache or internal storage? Is there a place to find out why to do zipalign or to change the system heapsize? I'm running the stock 8gb card that is partitioned. Thanks for any help.

ianelectro said:
Unfortunately it doesn't work at all on new synergy-kingdom hybrid.
Click to expand...
Click to collapse
If you could get this script working on the new Synergy Kingdom, I would be eternally grateful, as I'm having space issues on that ROM currently (and I really shouldn't be).

a2sd
Thanks for the break down. Never fully understood how to use this. Big improvement in performance. Using partition to its proper use. Played with Heap size and got it as low as I could (15) and am very happy with the changes. Any one who has not done this SHOULD.

[ROM][CWM][ROOT] (Pics Added + Add-Ons) Smooth Maximus ROM GingerClone v1 [7/7/11]

Welcome to the Second &nd My Second Custom ROM for the Sidekick 4G
This is my Version of a Gingerbread/SGSII Clone that i have put alot of work into and took alot of time to get this theme how i wanted it.
it is HIGHLY Recommended that You update to this ROM From Smooth Maximus X.
For the many that like the SMX Theme and themed apps it will be posted in themes and apps section soon to flash over this ROM
MORE SCREENSHOTS Are HERE !!
INFO
Base: SK4G.KD1/SGS4G.UVKD1 2.2.1
Rooted with Modded Recovery to enable flashing into CWM
Deodexed 100%
All Apps Optimized and zip-aligned
Framework Optimized and Zipaligned
All System apps Up to date
Debloated (Like Smooth Maximus X)
Kernel: Bali 2.2
Modem: KD1
Custom Theme based on Gingerbread made by me (Mostly Built From Xperia Arc, AOSP 2.3, and SGSII 2.3 Gingerbread, With my own little touch)
SGSII System App icons
SGSII Live Wallpapers + More
Nexus S Ringtones and Notification + Added more Alarm Sounds.
Nexus(S) Boot Animation + Custom Nexus Shutdown with sound.
Build.prop Edits (Changed Default Ringtones/Notifications, Changes to improve scrolling + UI performance + much More)
Stock/Default Font
Stock Transitions/Animations
Many init.d tweaks for better overall performance.
Additional INFO
Gallery images will load so fast ! (after first reboot, all tweaks should kick in)
Unlocking has never been so smooth ..
The Only Launchers Included is LauncherPro (Amazing, see in the market to see what its capable of.)
And Touchwiz4.5 Launcher by Fr4gg0r! (Also Amazing, See the Original Thread to See what it can do)
Phone now instantly rings when someone dials out/calls your number
Wifi scan interval inscreased by 20% to save battery (changed from 1 min scan to 1.2 min scan)
Most apps are stock (Unthemed, but with themed icons from SGSII)
AOSP Apps: Email, Clock, Calculator.
Some apps themed to look like SGSII Twiz and not the Custom SK4G Twiz (nothing too much)
For those who care about quadrant scores you can get anything from 1250-1550 Just like with Smooth Maximus X
Overall this ROM is Based on Smooth Maximus X which is very fast, but i've made ALOT of changes and testing the edits i made. Things like apps staying in memory, scrolling stutters, pulldown stutters and Much more have been improved and i honestly dont see how it can get better from here (But you decide lol). This will be my flagship ROM so if/when i come up with ideas/mods/tweaks it will be updated for this ROM and Not Smooth Maximus X unless i decide to make time for it.
Download and instructions are in the Second Post . . vVv
(FAQ) And Add-ons Are Below in THIS Post. Right below this. Please Read before Asking any questions.. Thanks !
Click to expand...
Click to collapse
FAQ
Q - i Just Flashed a ROM and Dont Want to Loose all of my Data i just re-setup / I have a setup and i dont want to loose it . . Do i HAVE to Wipe ?
A - Yes you Have to Wipe but if you dont want to loose that data you can Make a nandroid Backup before wiping your Data, Follow the install instructions and install the ROM. Right after the ROM Boots, reboot into recovery and go to backup and restore > advanced restore > *choose backup* > restore data then Reboot and your data is Back to the way it was before you wiped.
___________
Q - im having trouble Downloading a .zip file (or any other file format) from the Browser, What do i do ??
A - Go to the Market and download astro file manager. go to preferences and enable browser to download any file types. Then Download whatever you was trying to download.
Click to expand...
Click to collapse
ADD-ONS
Phone fix: Phone_memo_fix flash via CWM
Green Honeycomb Battery - See This Post for Photo and Download is attached to this post
Smooth Fonts *Flash from CWM recovery* (Custom Fonts from Smooth Maximus X) Download Here
Click to expand...
Click to collapse

Install Instructions: Read Carefully.
* First Off, its ALWAYS good to keep a nandroid backup incase you run into a problem.
if you dont already know how to, Do it From CWM recovery. Go to Backup/restore > Backup and it will backup your phone system ,data ect and you can restore it back to this state From CWM whenever you want. *
Click to expand...
Click to collapse
Flash though CWM - Just Like Smooth Maximus X
Instructions -
- Put zip file in your /sdcard
- Reboot into cwm recovery
- Wipe Data/Factory Reset
- Wipe Cache Partition
(Optional but recommended to prevent any minor issues)-Wipe Dalvik Cache from advanced menu in CWM
*Now before you Flash, Only if this is your FIRST time Flashing a Custom ROM otherwise ignore the mounts/unmount part*
MAKE SURE YOUR MOUNTS LOOK LIKE THIS: (Go to mounts and storage from CWM recovery)
UNMOUNT CACHE
MOUNT DATA
MOUNT SDCARD
UNMOUNT SYSTEM
Click to expand...
Click to collapse
- Now its safe to Flash the .zip
(Optional but recommended)-Wipe Cache then Wipe Dalvik Cache from advanced menu in CWM before Rebooting.
(AGAIN IGNORE UNLESS THIS IS your First time installing a custom ROM) after you flash, go back to mounts and storage and make sure your mounts look like this
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
(To First Time installers, System Needs to be set to Unmount, though it would really be mounted. If you do Not do this you will have a softbrick and will have to ODIN to stock and start all over ....) Once you have Flashed a Custom ROM or Bali 2.2 Kernel you dont have to worry about mounts
Click to expand...
Click to collapse
AFTER THE ROM BOOTS, i Recommend letting it sit for about 5 mins without use so cache and stuff builds back up, then log into google from gmail/market or someway, let google sync for 5 mins then reboot again. then you will have your Sidekick 4G in the best state its ever been
Click to expand...
Click to collapse
Please leave Feedback, Tell me what you like/dislike or leave ideas Download and Enjoy !
Smooth Maximus GingerClone ! [176.12 MB] >>> DOWNLOAD!!!

30 mintues<3

yes!!!!! victoryyyyy

can't wait lol
Sent from my SGH-T839 using XDA App

thank you ayo!
flashing as we speak!

Download and instructions in second post now .. Enjoy Guys !

ayoteddy said:
Download and instructions in second post now .. Enjoy Guys !
Click to expand...
Click to collapse
just to be clear if flashed smooth maximus rom x then we dont check mounts

tylermaciaszek said:
just to be clear if flashed smooth maximus rom x then we dont check mounts
Click to expand...
Click to collapse
yes, if you've flashed a Custom ROM or Bali 2.2 no need to check mounts.

ayoteddy said:
yes, if you've flashed a Custom ROM or Bali 2.2 no need to check mounts.
Click to expand...
Click to collapse
quick suggestion if you dont mind.
put backup in cwm as first step for first timers they may not know to back up

are there any pics
Sent from my SGH-T839 using XDA App

j-king said:
are there any pics
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
im rebooting now i can upload pics if ayoteddy does not

tylermaciaszek said:
im rebooting now i can upload pics if ayoteddy does not
Click to expand...
Click to collapse
i will be adding pics to the OP later but you might beat me to it.

damn it i flashed maximus x by accident :/
fixed it
this bootup scrren is amazing<3

are there any pics
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
ayoteddy you have outdone yourself with this rom.
it is super responsive and quick.
its nice on the eyes i love the green.
the notification bar looks clean, the app draw opens instantly.
the scrolling is very smooth. no checkrboarding when zooming on web.
i like how this says 4g instead of the H
good choice in launchers
im impressed keep up the good work.
pictures below more up later vvvvv

tylermaciaszek said:
here are a few more up later!
Click to expand...
Click to collapse
lol your pics came out inverted . . i think you can change that from the settings in your screenshot app .

ayoteddy said:
lol your pics came out inverted . . i think you can change that from the settings in your screenshot app .
Click to expand...
Click to collapse
oh the colors. i didnt realize that it will be fixed with the new pictures later

tylermaciaszek said:
here are a few more up later!
Click to expand...
Click to collapse
looks awesome
Sent from my SGH-T839 using XDA App

nice work loving it

j-king said:
looks awesome
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
the color scheme in my pictures are messed up a little im sorry but you get the idea of the rom

parsing errors on swype

I have asked this question in the eyecandy ice cream sandwich thread but no one has said anything. evertime i try to load swype from the beta invite email it goes all the way until i hit to 'fetching swype beta download' then you pic 'swype beta' then is says "parse error, there is a problem parsing the package".
i have even loaded up sense roms and any rom i flash it always says the same thing. every time i flash a rom i run a "wipe sensation" program thengo thru the usual data wipe, cache wipe, them flash rom, then go back and wipe dalvic cache and fix permissions. same combo i have been doing for a year or so.
does anyone have any insight to this problem? I really miss not having swype.

ksnexusone said:
I have asked this question in the eyecandy ice cream sandwich thread but no one has said anything. evertime i try to load swype from the beta invite email it goes all the way until i hit to 'fetching swype beta download' then you pic 'swype beta' then is says "parse error, there is a problem parsing the package".
i have even loaded up sense roms and any rom i flash it always says the same thing. every time i flash a rom i run a "wipe sensation" program thengo thru the usual data wipe, cache wipe, them flash rom, then go back and wipe dalvic cache and fix permissions. same combo i have been doing for a year or so.
does anyone have any insight to this problem? I really miss not having swype.
Click to expand...
Click to collapse
It's not just you man. I've been trying this for days. I'm on an HTC sensation running elegancias sense 4. I have no idea what's up with it. Not having swype sucks

Did you try pushing it to system/app?

have not tried it on your ROM, but on the MIUI v4, this worked for me.
Its a flashable swype.
http://www.mediafire.com/?l5brukdug885u6u

I was getting this error with other apks when my memory card was corrupt. Try a different memory card maybe?

This was happening for me a few days ago. Then resolved itself, however it has started again. It's not only you. A lot of people are reporting it on their forums.
Sent from my HTC Sensation XE with Beats Audio using XDA

Hi I am running ordroid rom and replying to this post using swipe. No problems here. Just enable it in settings. I even choose the color of my swipe. Works perfectly just like with stock. But yes, you do have to enable it first for it to work. Not sure about other Roms but I can confirm ordroid 8.6.5 is running swipe perfectly. Hope this helps.
Sent from my Sensation 4G using xda premium

wow, thank you guys for all your replies. guess i forgot to follow this thread like i normally do. I am going to try the flashable apk in top of this thread. i will let you guys know.
btw, I am a swype fanboy all day long but with these problems trying to load it i have went back to running the swiftkey x keyboard til i can get my beloved swype back.

rolltideburr said:
have not tried it on your ROM, but on the MIUI v4, this worked for me.
Its a flashable swype.
mediafire.com/?l5brukdug885u6u
Click to expand...
Click to collapse
Does not work. Someone has a working version of the installation?

Flash version worked great! Thanks!

There's nothing wrong with your phone.
It seems they forgot to upload the file on their servers; at least this is what they're saying on their forum
http://forum.swype.com/showthread.p...a-Error-Download-Failed-Password-Reset/page12
Hopefully they'll have a fix soon..

rolltideburr said:
have not tried it on your ROM, but on the MIUI v4, this worked for me.
Its a flashable swype.
http://www.mediafire.com/?l5brukdug885u6u
Click to expand...
Click to collapse
Thanks so much for the flash zip. I kept trying to download via swype installer but no luck. Flashed this and set to default input in keyboard settings and it works beautifully! Gonna keep this one for backup.
Sent from my HTC Sensation XE with Beats Audio using XDA

Swype error - permission problem?
Guys/Gals,
I also found another error in alogcat, that could be the issue... it says "Not granting permission android.permissions.INSTALL_PACKAGE to package com.swype.android.installer (protectionlevel=3 flags=0xae44)"
Not sure, but it may be the issue. Anybody know how to allow that permission for this app?
*edit* tried copying the installer app to system/app , but that does not do anything. I am also getting the FileNotFound exception, but that could be a problem with Swype installer in ICS...

The flashable file worked like a charm, boom... I've been having the same issue with parsing errors. I guess the dummies from Swype have not fixed the problem yet.
Thanks rolltideburr

I am trying TouchPal now (free in google play)... so far quite good (better than SlideIT). If Swype wants to scare their beta users away, they are making a good effort of it.

Here is how I got Swype back:
If any of you have a NAND backup of before you lost Swype, you can pull out com.swype.android.input (or something very similar) from the backup and extract it. Once extracted and restored (app + data), wipe cache and dalvik and go enable it in Settings --> Language and Input. BAM!!! You got Swype!!

[Nook HD+][EMMC][CM10.1] Tweaked Xperia V2.8 ROM [RETIRED][29/05/2015]

The ROM is retired. The final version can be downloaded from here:
http://forum.xda-developers.com/showpost.php?p=58493801&postcount=339
Click to expand...
Click to collapse
This is a tweaked versions of CARBON-JB-UNOFFICIAL-B11 so all credit goes to killersloth for the ROM. Without his work this ROM wouldn't be possible. So if you like this ROM please go to the CARBON ROM thread and click the "Thanks" button.
Changes Made:
Replaced Trebuchet launcher with Nova launcher.
Replaced stock gallery with Sony Z Album and Movie app (Facebook & Twitter integration working.)
Added Sony Z Walkman app with UPNP/DLNA Media Server.
Replaced the default kernel with the kernel from CM10.1 Stable by verygreen.
Added BeatsAudio+xLoud+ClearAudio for audio effects and ViPER4Android for the sound engine. Settings I am using.
Added Mobile BRAVIA® Engine for improved video processing.
Modified Adobe Flash 11.1 with Hulu support.
Host level ad blocking. If you are having issues with adblocking see attachments to remove it.
Forced all rendering to be done on the GPU. Should help with gaming and make things more smoother. To help improve performance even further see this post.
GoogleEars.
Kick Ass Kernelizer
Auto-zipalign and defragdb on boot
Auto Calibration on boot. Only does a few programs each boot. So may take a few reboots to calibrate all of them.
Plus many improvements taken from this thread.
I also added some terminal commands.
Run each command with SU first then the command.
fixfc - Fix apps force closing.
sclean - Clean the dalvik cache and cache partition
v6 - run the V6 SuperCharger script. I would run this as soon as the ROM is setup..
Know bugs
Not a bug as such but something you should be aware of. It does take a few reboots to optimise all the apps.
V4A XHiFi may do a hot reboot when first getting root, same with Root Browser. This will only happen once and will work fine afterwards. This is only normally an issue if you try getting ROOT on first boot. On the second reboot this doesn't happen.
Wifi will turn off then back on while it is setting up wl1271-nvs.bin. Once the file is created Wifi shouldn't disconnect.
Any more issues please report them.
Xperia-2.3.9-CARBON-JB-B11-ovation.zip - 294.19 MB
MD5: 05483bc421eb793c9ccf0113323b406d
For the latest version using Google Now Launcher use this rom: http://forum.xda-developers.com/showpost.php?p=58493801&postcount=339
Wallpaper: http://blankid.deviantart.com/art/Escape2-347788407
​
If you would like to use the WALKMAN app from the Sony Xperia Z Ultra you can do so by flashing this: Xperia-Ultra_WALKMAN_SemcMusic.zip. Make sure you boot into the ROM before flashing. If you flash this without booting into the ROM first it will not work.
Most of the features in the Sony Xperia Z Ultra WALKMAN are working but "Music Unlimited" service isn't.

Thank you, I will give it a try.

Do we use the gapps from the original carbon threads?
And how do you flash the scrips? Just like any other zip file? Can it be done when installing this ROM ?

JDMpire said:
Do we use the gapps from the original carbon threads?
And how do you flash the scrips? Just like any other zip file? Can it be done when installing this ROM ?
Click to expand...
Click to collapse
I just added the scripts as a separate download so other devs can take a look at them without downloading the whole ROM. All the scripts are included in the ROM. Everything you need is built into the ROM. Just download it and install.

unstable
I installed on top of Carbon B9 without wiping anything and everything was forceclosing.Then I wiped cache partiion and Dalvick cache and reinstalled ,it was usable thistime but several apps still forceclosing including Chrome,I went back to Carbon.

akramarshad said:
I installed on top of Carbon B9 without wiping anything and everything was forceclosing.Then I wiped cache partiion and Dalvick cache and reinstalled ,it was usable thistime but several apps still forceclosing including Chrome,I went back to Carbon.
Click to expand...
Click to collapse
If you did not install with full wipe I am note sure it is fair to mark it as unstable. Did you even attempt to clear the app data for the apps foreclosing?
have not tried this yet but just thought labeling the effort as unstable prior to proper install is not fair.

akramarshad said:
I installed on top of Carbon B9 without wiping anything and everything was forceclosing.Then I wiped cache partiion and Dalvick cache and reinstalled ,it was usable thistime but several apps still forceclosing including Chrome,I went back to Carbon.
Click to expand...
Click to collapse
Just installed with full wipe restoring apps and data from TB. So far everything is ok.
Feels slightly less laggy than B9.
Dunno about battery life yet.

This is working great for me.
I did a dirty flash over RootBox and it's really nice.
Been the best rom for me on my Nook so far. Pinguy1982, please keep the thread updated mate.
Only issue I had was my usual
Android.process.acore has stopped
Which I resolved by following the text below. (cribbed from somewhere on the net)
If you go to Settings/Applications/Manage Applications/ then choose the All tab. Scroll down to Contacts open it and clear the data cache. Now do the same again but this time open Contact Storage and also clear the data cache. This issue is related to an Android bug and affects many devices. It's related to apps that use the sync function.
Works for me.
Cheers all

mcord11758 said:
If you did not install with full wipe I am note sure it is fair to mark it as unstable. Did you even attempt to clear the app data for the apps foreclosing?
have not tried this yet but just thought labeling the effort as unstable prior to proper install is not fair.
Click to expand...
Click to collapse
I agree completely and would urge the poster to revise his comment or certainly remove the subject. Way too hasty and unfair to make such a quick judgment certainly in the absence of a full or data wipe.

RustedRoot said:
I agree completely and would urge the poster to revise his comment or certainly remove the subject. Way too hasty and unfair to make such a quick judgment certainly in the absence of a full or data wipe.
Click to expand...
Click to collapse
Sorry if I offended you.My understanding is that you wipe data only if you are installing in place of different ROM.It was carbon on top of Carbonand I did not feel I needed to wipe data partition.

akramarshad said:
Sorry if I offended you.My understanding is that you wipe data only if you are installing in place of different ROM.It was carbon on top of Carbonand I did not feel I needed to wipe data partition.
Click to expand...
Click to collapse
Dude it's all cool. But I have changed a fair bit to the ROM so just installing over it probably won't work. I have made drastic changes to how dalvik works so using pre-installed apps from a previous install probably won't work.
Sent from my Nook HD+ using Tapatalk HD

Do you mind building a version for the Nook HD ?

so using apps from titanium backup would be a problem?

bckrupps said:
so using apps from titanium backup would be a problem?
Click to expand...
Click to collapse
Apps no, dalvik cache maybe. Restoring apps settings and the apps won't be a problem, but using the dalvik cache might be.
The cache is in /data/dalvik-cache. Using that maybe an issue.

pinguy1982 said:
Apps no, dalvik cache maybe. The apps settings and the app won't be a problem, but using the dalvik cache might be.
The cache is in /data/dalvik-cache. Using that maybe an issue.
Click to expand...
Click to collapse
thanks.I always clear out dalvik cache anyway when I try new stuff. I was thinking of trying it. the new build of cm 10.1 seems to match up with my tablet perfectly so we will see. thanks for the ROM. the more the better

akramarshad said:
I installed on top of Carbon B9 without wiping anything and everything was forceclosing.Then I wiped cache partiion and Dalvick cache and reinstalled ,it was usable thistime but several apps still forceclosing including Chrome,I went back to Carbon.
Click to expand...
Click to collapse
I did this too, but wiped dalvik, no force closes, but status bar is gone and can't get it back... going to try flashing again...

Just flashed a couple of hours ago and seems pretty rad so far. I'll give it some time to "settle" before passing judgement. Definitely like the idea!
Good to see more options around here. My hat goes off to all devs.
Sent from my Nook HD+ using xda app-developers app

Just flashed it ... Can't see the option "Reboot into recovery" when holding the power button. Is there anyone I can enable it ?

nocloo said:
Just flashed it ... Can't see the option "Reboot into recovery" when holding the power button. Is there anyone I can enable it ?
Click to expand...
Click to collapse
Settings-system-power menu-reboot menu

Battery drain so far seems to be no worse than B9 for me.
Definitely like this ROM, it is faster and smoother than any other I tried for my Nook, seems quite stable as well (no random reboots etc.)