Related
I used the directions from Jesus Freke to install the Mod RC30 on my G1.
Then I read and used the instructions provided by Stericson to change my password....
Only one problem! Now it won't let me access root with su or with my password. I wanted to use something generic first and if it was successful I would change it to a good password. So, I used my user name "shaneaus"
Now I get permission denied with both su and shaneaus!
Am I totally screwed? Is there some way to reset the password back to su. That wouldn't make sense, I know, from a security sense. Just hoping.
Thanks
I'm hoping that there is an easier solution.
But, if I flash the update... Will that reset the root password?
I don't know what happened but this can be remedied. First off, it is possible that when you change the superuser command you failed to chmod it to 4755...at any rate, you can solve this by plugging your phone into your computer and starting up an adb shell, this should give you root if you have the modded rc30. Next remount /system to read and write privileges
mount -o remount,rw /dev/block/mtdblock3 /system
now type:
cd /system/bin
ls
Do you see su or your username listed?
If so type:
chmod 4755 (type su or your username here, without parantheses)
now open terminal emulator on your phone and try your superuser command again.
If you did not see su or your username in the output of ls type the following to get a setuid shell:
cat sh > (username or su whichever you want)
chmod 4755 (username or su whichever you want)
now open terminal emulator on your phone and try your superuser command again.
That should get you going.
Ha!
I'm just beginning to learn how to do this stuff. I have no idea how to "start up an adb shell" or even what an adb shell is!
So, I guess I'll start researching on line!
Ok, so I've read up on the adb shell and think I have a grip on how to use it... Except I can't figure out how to get the darn thing started. Do I have to open up the emulator? I thought I would be accessing the device - not the emulator. But, most sites talk about using the adb with the emulator. Also, I have seen where I should be able to run adb devices.exe and have it show my device to confirm it is connected. Only one problem, I can't find the adb devices.exe in the sdk kit.
Oh, and thanks again to Jesus Freke for the 64bit USB drivers. worked like a charm!
Awesome! Y'all are fantastic! I learned a lot tonight! I did the following:
Add $SDK_ROOT\tools to my path
Then had a hell of a time because everything I was reading (except for one location I finally found said to run "adb shell.exe"
I finally found a site that said to run "adb.exe shell"
And, whalla! I was in.
Your above advise was spot on, Stericson! Thank you!
Glad to hear you got it sorted.
shaneaus said:
Oh, and thanks again to Jesus Freke for the 64bit USB drivers. worked like a charm!
Click to expand...
Click to collapse
*looks around* huh? me?
I assume you're refering to this driver?
You should be thanking aziwoqpd for that, not me
Hi All,
The Ash shell provides a few advantages over the Android default sh shell such as command history and cursor handling at the prompt. There are other benefits, but these are the first that come in most handy (to me).
The following tutorial will get you ash as the login shell with as yet no ill effects:
Note: that in my case, I'm using my android2sd construct and thus this modification is being done to my active overlay profile setup, thus to undo it I can simply boot into "safe\\normal" mode and undo the changes without possibly locking me out of the console should it have failed (which it didn't) But you can edit the Android /system/bin/sh file in this manner directly.
Ash as Login Shell:
OK, make the /system fs read-write:
mount -o remount,rw /system
Click to expand...
Click to collapse
Note: that the fs type is not needed, and in my case is not yaffs but ext3, Android will figure it out proper.
Next,
cp -a /system/bin/sh /system/bin/sh0
Click to expand...
Click to collapse
(this is for backup purposes and allows us to undo the change if so desired, or delete it if no longer needed).
Note: I'm using JF1.51 roms, so busybox ash is available as /system/xbin/bb/ash, so that is what I am using here; use ash however you are able to access it.
echo "#!/system/xbin/bb/ash">/system/bin/sh
echo "/system/xbin/bb/ash \[email protected]">>/system/bin/sh
Click to expand...
Click to collapse
Please note the use of (redirect\\overwrite)> and (redirect\\append)>>.
This will overwrite sh with a script to load the desired shell, executing any command-line arguments passed, and preserve the permissions of the original sh file. You can manually set the permissions the same as they are for our sh0 backup if the permissions (root.shell)(0755) don't seem to keep.
Finally reset the read-only state of /system:
mount -o remount,ro /system
Click to expand...
Click to collapse
Now if you shell-in\\telnet-in you should get the ash prompt which unlike the Android sh default prompt, includes the present working directory(pwd) ie: '/#' instead of just '#'.
Note: A reboot should not cause the loss of the modification, but if does, copy the new sh script to your /data/local/bin location or something and copy it back via boot script or something.
Shell Scripts:
If you're like me, you discovered that Android didn't need the interpreter declaration comment in scripts, and thus may not have used them...Well, you will need to update your scripts to include them by adding something similar to the following as the first line of your scripts:
#!/system/xbin/bb/ash
Click to expand...
Click to collapse
Again, please note that I am using JF1.51 roms and the location of the busybox ash shell is what I'm listing; put the full location to the shell you intend to use as this location.
Without the interpreter declaration, ash simply complains 'not found' at the first command, as ash doesn't know how to interpret the script, and doesn't seem to default to the login shell.
Hope someone finds this helpful!
sweet. This is going to be very useful
BAM. thats sexy. i just did this on CM3.6.7.1. works like a charm.
scratches head. i'm lost. what does this do and how does this make my g1 better?
temporizer said:
scratches head. i'm lost. what does this do and how does this make my g1 better?
Click to expand...
Click to collapse
im not sure about the other features, but the one i installed it for is to have your working directory in front of ur prompt. ex:
Code:
/# cd /sdcard
/sdcard # cd /system/sd
/system/sd #
etc...
EDIT: Also, if you use ConnectBot, you'll notice with the regular sh, if u scroll up with tracball, you get BS characters on the prompt. with THIS one, when you scroll up, you get last command entered. VERY handy for when you mistype one character on a long-ass command.
I love you
Couldn't you do this?
Code:
mv /system/bin/sh /system/bin/sh0
ln -s /system/xbin/bb/ash /system/bin/sh
great job, i'm going to get ash working on my G1 (CM-3.6.7.1)
Thanks.
kanstin said:
Couldn't you do this?
Code:
mv /system/bin/sh /system/bin/sh0
ln -s /system/xbin/bb/ash /system/bin/sh
Click to expand...
Click to collapse
I tried this and it worked even after a reboot...
Sweet, I love the scroll back with trackball in the terminal!!! Me thinks this should get absorbed into the next Cyan release.
kanstin said:
Couldn't you do this?
Code:
mv /system/bin/sh /system/bin/sh0
ln -s /system/xbin/bb/ash /system/bin/sh
Click to expand...
Click to collapse
Yes, I reckon you could. Though I had done a few experiments where the symlink failed, but I'm fairly sure it was do to the link: /system/xbin/bb/ash -->../busybox and /system/bin/../busybox not existing...so I did it via script. Many ways to skin a cat they say.
Thank you all... this is fricken awesome!!
temporizer said:
scratches head. i'm lost. what does this do and how does this make my g1 better?
Click to expand...
Click to collapse
It gives a more advanced shell for when you use the command line interface or telnet into your G1. If you don't use the command line a lot, it won't help you.
As for specific benefits to the advanced version, it was listed in the first post.
Hi,
imho this is rather a hack that exposes you to the risk at least on CM to loose your
shell during boot as xbin.sqf the compressed squashfs filesystem containing
busybox is mounted rather late in the boot process. A cleaner solution would be to
move busybox to system/bin and link it to sh. That way you ensure that sh will
always be accessible during boot and also later on, thus not interfering with
further developments. A alternative could be to compile a standalone version
of busybox containing only ash (for size reasons, as size in /system/bin is precious)
copy that to /system/bin and link sh to it.
Seems to work fine on Dude's. Not really sure how it should open, but I type "ash" at the prompt and I get the /$ and /# if superuser. I also get the command history by rolling the trackball, which is a very nice feature.
Can i install this without using my PC?
temporizer said:
Can i install this without using my PC?
Click to expand...
Click to collapse
Should work using terminal.
Tried it on JACHero 2.7.1
I tried the hard link one and I get a read only fs error on the first move command. What should I chmod to get past that?
mugafuga said:
I tried the hard link one and I get a read only fs error on the first move command. What should I chmod to get past that?
Click to expand...
Click to collapse
Do this first before the mv and the symlink.
mount -o remount,rw /system
farmatito said:
Hi,
imho this is rather a hack that exposes you to the risk at least on CM to loose your
shell during boot as xbin.sqf the compressed squashfs filesystem containing
busybox is mounted rather late in the boot process. A cleaner solution would be to
move busybox to system/bin and link it to sh. That way you ensure that sh will
always be accessible during boot and also later on, thus not interfering with
further developments. A alternative could be to compile a standalone version
of busybox containing only ash (for size reasons, as size in /system/bin is precious)
copy that to /system/bin and link sh to it.
Click to expand...
Click to collapse
Is this in any way accurate? I dedicate my g1 to cyan's roms and wouldn't want anything to hinder any of the goodness that is cyanogenMod. Advice?
Load ash when terminal is started?
temporizer said:
Is this in any way accurate? I dedicate my g1 to cyan's roms and wouldn't want anything to hinder any of the goodness that is cyanogenMod. Advice?
Click to expand...
Click to collapse
Safest method will be to change to ash shell once terminal app is started (same as typing "ash" to switch shell from sh to ash). I don't know how to do it in android (in linux you could add it to your login script).
So if someone knows how to execute a command when we login using the terminal app, then switching to ash shell would work without fear of breaking any other functionality.
Posting this here because I think it will be of more interest to the tinkerers/devs than general users, if not, feel free to move it. I cobbled all of this together from various places on the web, but I think the credit for the binaries goes to Paul @ MoDaCo.
Nandroid before going any further!
Files you'll need:
For WiFi and CDMA SSH access - QuickSSHD (Download this from the Market. $1.50). I'm just going to assume if you're still reading, you know what this is for and how to use it. It's braindead simple. I think dropbear can be installed and configured manually, but for the $1.50...meh.
adb for tethered access.
The rest are zipped up here: terminfo, nano, bash, profile**
Unzip bashnano.zip onto your SDCard.
adb remount
From adb shell:
Install Terminfo:
cp -r /sdcard/terminfo /system/etc
Setup Bash:
cp /sdcard/bash /system/bin/bash_new
mv /system/bin/sh /system/bin/sh.old
ln -s /system/bin/bash_new /system/bin/sh
mv /sdcard/profile /sdcard/bash_profile (Thanks to jjvcuyler for finding adb bash profile location.)
Setup Nano:
cp /sdcard/nano /system/bin
I'm not sure if this setup will have any impact on sh scripts being used in the various ROMs, so use this at your own risk. I think it would kick ass to see this type of bash functionality baked into the custom ROMs.
If anybody would like to make this a flashable.zip, please do. I don't know how to do that yet.
Anyway, hope y'all find it useful.
**profile reflects a few personal choices for aliases and colors, but you can edit to your personal taste.
So I just did this. Is there any way to get this functionality into a local terminal?
Also I was able to do everything from a local terminal without adb. Just do the following first:
su
remount rw
Click to expand...
Click to collapse
adb shell fires off bash, but it doesn't read profile from /etc. It's going to be a simple matter of figuring out where bash is looking for it. I just haven't found that out yet.
How do you like having full bash capabilities on EVO? Arrows/tab completion/color prompts, etc...
J
jmxp69 said:
adb shell fires off bash, but it doesn't read profile from /etc. It's going to be a simple matter of figuring out where bash is looking for it. I just haven't found that out yet.
How do you like having full bash capabilities on EVO? Arrows/tab completion/color prompts, etc...
J
Click to expand...
Click to collapse
Copy profile to /sdcard/bash_profile
jjvcuyler said:
Copy profile to /sdcard/bash_profile
Click to expand...
Click to collapse
WooT! There it is. I'll update the OP. Thanks jjvcuyler.
Edit: /sdcard/bash_profile works for ssh and adb. OP updated to reflect the change.
jmxp69 said:
Posting this here because I think it will be of more interest to the tinkerers/devs than general users, if not, feel free to move it. I cobbled all of this together from various places on the web, but I think the credit for the binaries goes to Paul @ MoDaCo.
Nandroid before going any further!
Files you'll need:
For WiFi and CDMA SSH access - QuickSSHD (Download this from the Market. $1.50). I'm just going to assume if you're still reading, you know what this is for and how to use it. It's braindead simple. I think dropbear can be installed and configured manually, but for the $1.50...meh.
adb for tethered access.
The rest are zipped up here[/URL]: terminfo.zip, nano, bash, profile**
Unzip bashnano.zip onto your SDCard.
Unzip terminfo.zip (from inside bashnano.zip) onto your SDCard.
adb remount
From adb shell:
Install Terminfo:
cp -r /sdcard/terminfo /system/etc
Setup Bash:
cp /sdcard/bash /system/bin/bash_new
mv /system/bin/sh /system/bin/sh.old
ln -s /system/bin/bash_new /system/bin/sh
mv /sdcard/profile /sdcard/bash_profile (Thanks to jjvcuyler for finding adb bash profile location.)
Setup Nano:
cp /sdcard/nano /system/bin
I'm not sure if this setup will have any impact on sh scripts being used in the various ROMs, so use this at your own risk. I think it would kick ass to see this type of bash functionality baked into the custom ROMs.
If anybody would like to make this a flashable.zip, please do. I don't know how to do that yet.
Anyway, hope y'all find it useful.
**profile reflects a few personal choices for aliases and colors, but you can edit to your personal taste.
Click to expand...
Click to collapse
there is no terminfo.zip and there is nothing in terminfo directory from within the original zip... help?
Sorry, I missed the recurse flag zipping the terminfo directory. It's fixed now. Go ahead and re-download.
Here's a link for just terminfo.zip
J
I modified the bash_profile to get rid of the colors since the window's cmd.exe doesnt support ansi colors. probably a better way to do this but it works for me.
also found this useful for setting PS1 to my liking http://www.cyberciti.biz/tips/howto-linux-unix-bash-shell-setup-prompt.html
jmxp69 said:
adb shell fires off bash, but it doesn't read profile from /etc. It's going to be a simple matter of figuring out where bash is looking for it. I just haven't found that out yet.
How do you like having full bash capabilities on EVO? Arrows/tab completion/color prompts, etc...
J
Click to expand...
Click to collapse
is there a way to get tab completion through adb shell?
Yes. This works with adb shell. Just follow the directions in the OP.
jmxp69 said:
Yes. This works with adb shell. Just follow the directions in the OP.
Click to expand...
Click to collapse
i have and i do have everything done as stated in the OP, when i try tab completion via adb shell (phone tethered with usb) from my pc, it just puts in a tab, it doesn't complete.
Hmm....could be a dos thing with cmd.exe. I haven't tried on a PC, I'm on a Mac. adb shell via OSX works fine with tab completion. Try ssh'ing in instead with something like putty? Once you get ssh going, you don't need a cable.
Edit: Confirmed...tab completion doesn't work over Win cmd.exe and adb shell.
jmxp69 said:
Hmm....could be a dos thing with cmd.exe. I haven't tried on a PC, I'm on a Mac. adb shell via OSX works fine with tab completion. Try ssh'ing in instead with something like putty? Once you get ssh going, you don't need a cable.
Edit: Confirmed...tab completion doesn't work over Win cmd.exe and adb shell.
Click to expand...
Click to collapse
Thanks for looking into it... I'll try getting it to work via linux instead. I guess ssh would be a solution, but i never turn wifi on.
Is anyone able to do a NAND backup/restore after doing this? With Amon Ra's recovery I was unable to NAND backup.
EDIT:
I think this is a big negatory. I was just able to do a NAND backup, so maybe the error I got was a coincidence after applying these changes.
Anyone else noticing that the time is always displayed as GMT in the prompt? The date command gives the correct time for my timezone but the bash prompt always shows GMT
Vinny75 said:
Anyone else noticing that the time is always displayed as GMT in the prompt? The date command gives the correct time for my timezone but the bash prompt always shows GMT
Click to expand...
Click to collapse
Change PS1 line: \A to `date +%H:%M`
jmxp69 said:
Posting this here because I think it will be of more interest to the tinkerers/devs than general users, if not, feel free to move it. I cobbled all of this together from various places on the web, but I think the credit for the binaries goes to Paul @ MoDaCo.
Nandroid before going any further!
Files you'll need:
For WiFi and CDMA SSH access - QuickSSHD (Download this from the Market. $1.50). I'm just going to assume if you're still reading, you know what this is for and how to use it. It's braindead simple. I think dropbear can be installed and configured manually, but for the $1.50...meh.
adb for tethered access.
The rest are zipped up here: terminfo, nano, bash, profile**
Unzip bashnano.zip onto your SDCard.
adb remount
From adb shell:
Install Terminfo:
cp -r /sdcard/terminfo /system/etc
Setup Bash:
cp /sdcard/bash /system/bin/bash_new
mv /system/bin/sh /system/bin/sh.old
ln -s /system/bin/bash_new /system/bin/sh
mv /sdcard/profile /sdcard/bash_profile (Thanks to jjvcuyler for finding adb bash profile location.)
Setup Nano:
cp /sdcard/nano /system/bin
I'm not sure if this setup will have any impact on sh scripts being used in the various ROMs, so use this at your own risk. I think it would kick ass to see this type of bash functionality baked into the custom ROMs.
If anybody would like to make this a flashable.zip, please do. I don't know how to do that yet.
Anyway, hope y'all find it useful.
**profile reflects a few personal choices for aliases and colors, but you can edit to your personal taste.
Click to expand...
Click to collapse
I followed the steps exactly, but end up with "- exec '/system/bin/sh' failed: Permission denied (13) -" while typing "adb shell" in a windows or linux terminal. I cannot recover the original sh because the root is lost, and I cant root my phone anymore probably because something wrong with the new sh. Any idea how to fix this?
EDIT: Acutally nevermind. adb shell works in recovery mode. but still, not sure why the modified sh doest work for me
The Downloadlink is dead!
So the thread is useless.
francwalter said:
The Downloadlink is dead!
So the thread is useless.
Click to expand...
Click to collapse
Yeah.....no.
A simple google search would have shown you that the files are here: http://66.197.42.222/bashnano.zip
or here http://androidforums.com/attachment...ide-installing-bash-nano-android-bashnano.zip.
EDIT: I've also attached it in case the links above ever die, there will still be one which does not.
ya this is great and all but any decent busybox installer will setup bash for you.
I added bash to replace sh on my phone and i think it may be useful for someone.
I used this http://forum.xda-developers.com/showthread.php?t=537827 from mzet (Worked).
I also found this script http://forum.xda-developers.com/showthread.php?t=746364 from dsixda (NOT tried)
It is a much better shelll and it supports TAB.
It is also used when you connect your phone via ADB
terminal emulator: su (allow) ?
Nightbox said:
terminal emulator: su (allow) ?
Click to expand...
Click to collapse
yes of course
mpbm23 said:
I added bash to replace sh on my phone and i think it may be useful for someone.
I used this http://forum.xda-developers.com/showthread.php?t=537827 from mzet (Worked).
I also found this script http://forum.xda-developers.com/showthread.php?t=746364 from dsixda (NOT tried)
It is a much better shelll and it supports TAB.
It is also used when you connect your phone via ADB
Click to expand...
Click to collapse
thnx fr sharing
THanks to TEAMWIN!!!!!!!!!!!!!!
UPDATE to UPDATE- advanced users only that can understand my instructions please. I tried to make it newb friendly but this takes alot more time than I ever imagined ... (PROPS to ALL DEVS and POSTERS taking the time to share with us that which they spent hours testing!!!!)
so,
also download build.prop
place it in /data/bin
chown to root.root
chmod to 644
you only have to do this once, of course
Now reboot and run (updated and attached here at same time as the build.prop; so if you don't have the build.prop, you need to redownload daddy'stemproot.bat s it has been updated) daddy'stemproot.bat from wherever you downloaded it to.
http://dl.dropbox.com/u/7393616/build.prop
good luck!
UPDATE:
Just wanted to upload what I have been using since the original instructions are out of date.
have tested the following Windows script for 2 days without rebooting and retain full functionality on all root apps.
Instructions:
instead of doing copy/paste, once you have put fre3vo,su,busybox,and sqlite3 into /data/bin and set permisions/ownership, as per original instructions below,
if you have been using another script, just move everything to /data/bin and set permissions/ownership as per below;
and after every reboot, (or after doing the set-up for the first time users)
simply run this script:
(personally, after plugging my phone into my PC, and opening a command prompt, I always do "adb reboot"
then wait until the soft keys at bottom of screen light up (this means the phone is finishing all start up processes but for all extents and purposes the phone has booted) and then double click the file below. the command prompt will open and close itself, when closed, you are good to go until reboot)
Download and save this .bat to anywhere you want and run from anywhere you wish(mine is on my desktop for easy access):
LATEST VERSION Directly below:
http://dl.dropbox.com/u/7393616/daddy%27stemproot.bat
ORIGINAL Instructions:
Just wanted to give back so I will share how I have been getting functional su for on phone term apk and visible /data on root explorer and Superuser prompts for every root app (just because you allow at the prompt and Superuser allows an apk, doesn't mean it will alwasy work; if you open SetCpu more then once a boot it stops working. Bloatware Remover, though given root priveledges, doesn't work, I think becasue when trying to mount system, the apk uses the wrong partition in its script. etc.)
anyways
first get fre3vo, then the latest versions of su, busybox, sqlite3.
via shell from PC:
cd (directory where your 4 files are located)
push above files to /data/local/tmp (follow instructions in other threads)
get temp root via fre3vo
now with temp root do :
adb remount
adb shell mount -oremount,suid /dev/block/mmcblk0p23 /data
adb shell mkdir /data/bin
adb shell chown root.shell /data/bin
adb shell chmod 755 /data/bin
adb push (all 4 files, one at a time, to /data/bin)
adb shell chown root.shell /data/bin/su
adb shell chown root.shell /data/bin/busybox
adb shell chown root.shell /data/bin/sqlite3
adb shell chmod 6555 /data/bin/su
adb shell chmod 4555 /data/bin/busybox
adb shell chmod 755 /data/bin/sqlite3
adb shell chmod 755 /data/bin/fre3vo
now, set up is done, you don't have to do any of that again (unless you mesed up of course)
copy and paste the following lines into shell on PC and viola!
adb shell /data/bin/fre3vo
adb wait-for-device
adb remount
adb shell mount -o remount,suid /dev/block/mmcblk0p23 /data
adb shell ln -s /data/bin/su /system/xbin/su
adb shell ln -s /system/xbin/su /system/bin/su
adb shell ln -s /data/bin/busybox /system/xbin/busybox
adb shell ln -s /data/bin/sqlite /system/xbin/sqlite
adb shell mkdir /system/xbin/bb
adb shell /data/bin/busybox install /system/xbin/busybox /system/xbin/bb/
adb shell sync
So, everytime you reboot,
open a shell on your PC and copy and paste, and then you are free to live with root, until you reboot, and of course with limitations; but I personally can live with this until Fre3dom is complete.
Take your time boys(TEAMWIN) we love you!!!!
hope this helps somebody. I don't have much bandwith to check back to answer questions, but I am confident if any arise, that the community will step up as always. enjoy your root apps
Can somebody please explain to me what he means by latest version of su, busybox, and sqlite3? Apk or like files if anybody would be kind enough to post a zip file of all three?
xSunny said:
Can somebody please explain to me what he means by latest version of su, busybox, and sqlite3? Apk or like files if anybody would be kind enough to post a zip file of all three?
Click to expand...
Click to collapse
You can pull them files out of any rooted android phone.......
Why doesnt the OP just create a script and have it run with one click from the phone??
Thanks..
Sent from my HTC Sensation Z710e using XDA App
Mikey1022 said:
You can pull them files out of any rooted android phone.......
Why doesnt the OP just create a script and have it run with one click from the phone??
Click to expand...
Click to collapse
Commands to pull please?
xSunny said:
Commands to pull please?
Click to expand...
Click to collapse
Try the "Search" command here, if that fails hit Alt+f4.
KillaHurtz said:
Try the "Search" command here, if that fails hit Alt+f4.
Click to expand...
Click to collapse
How about you stop being a prick and answer the question if u dont want to answer then stop running your mouth like a little 2 years begging your mommie for ice cream.. Thank you.. Maybe you should hold the Alt+F4 button =] And dont come attacking me again please..
xSunny said:
How about you stop being a prick and answer the question if u dont want to answer then stop running your mouth like a little 2 years begging your mommie for ice cream.. Thank you.. Maybe you should hold the Alt+F4 button =] And dont come attacking me again please..
Click to expand...
Click to collapse
Wow your general lack of knowledge despite having a long list of devices is disturbing and sad. I guess referring you to the best, and most timely manner to find an answer is an attack ? LOL
xSunny said:
Commands to pull please?
Click to expand...
Click to collapse
adb pull /sdcard/yourfile /whereveryouwantit
or setup an FTP server on your phone (https://market.android.com/details?id=org.swiftp) and download what you're looking for through that.
xSunny said:
How about you stop being a prick and answer the question if u dont want to answer then stop running your mouth like a little 2 years begging your mommie for ice cream.. Thank you.. Maybe you should hold the Alt+F4 button =] And dont come attacking me again please..
Click to expand...
Click to collapse
KillaHurtz said:
Wow your general lack of knowledge despite having a long list of devices is disturbing and sad. I guess referring you to the best, and most timely manner to find an answer is an attack ? LOL
Click to expand...
Click to collapse
What is it with this forum??!??!?! I used to have a HD2 and the forum there was awesome! So many helpful and friendly people creating a productive and welcoming community! But here in the Sensation forum every second thread is full of people *****ing at each other and behaving like children! What the hell is wrong with you guys???
KillaHurtz said:
Wow your general lack of knowledge despite having a long list of devices is disturbing and sad. I guess referring you to the best, and most timely manner to find an answer is an attack ? LOL
Click to expand...
Click to collapse
Lmao.. Thats all im going to say to end this conversation anyways thanks for posting the commands to pull via adb
How do you push more than one file at a time?
adb push (all 4 files, one at a time, to /data/bin)
Click to expand...
Click to collapse
Thanks
Thanks Daddyroot ! the commands have really worked for me. Now I have a sensation with Temp root till I restart. All other scripts in the forum was not helping me.
Best solution I found so far. Not losing root till reboot anymore.
A++ would install again
Really glad to be able to give back to the community.
I wish I had more time when I posted this to check back and reply but I'm a single parent and time is short. After playing for a couple hours and finally seeing and being able to edit the /data folder, I knew it would be with it to make the time if I could help just one person to not waste the time figuring out what I could share. Nothing quite like the feeling you get on an unrooted phone when you first see the superuser prompt to allow or deny!!!
Thank you all who hit the thanks button!
And God bless TEAMWIN and (insert your favorite dev here)!!!
I will try to check back at least once a day...
Wisefire said:
How do you push more than one file at a time?
Click to expand...
Click to collapse
You don't... that's why he said "ONE, at a time"...