Related
Hi All
I have Dev G1 i was enjoying it until one day i decided i want more ,
so i went on line looking for images and i found one that i liked
which includes the multy touch and the root access i have followed the
steeps and it worked ,
until i received a call form my operator claiming that my mobile is
sending bulk SMS :s .
so i want the device back to its original state now i have downloaded
the radio image and the recovery image from HTC and i followed the
steps i have already done it once when i updated from 1.0 to 1.1 , any
way the radio image updated successfully , and i have copied the
recovery image and restarted with home and then i pressed Alt+s .. and
devices shows that its updating but nothing its the same with the same
SMS problem ,
so i wanted to try the fast boot i have found the fast boot screen
changed from the skater android to some screen with rainbow colors and
adb cant detect the device and i have T-mobile shows up when i start
the dev it shouldn't be there , any way all i want is to have my
mobile back
My current status is :
Model number
T-Mobile G1
Frimware version
1.1
Baseband version
62.33.20.08H_1.22.14.11
Kernel
2.6.25-01843-gfea26b0
[email protected] #1
Build Number
Kila-user 1.1 PLAT-RC33 126986
OTA-rel-keys,release-keys
Note i have followed the steps from this link
http://hehe2.net/gadgets/howto-multitouch-tethering-task-manager-for-android-g1/
Pleaaaase help me
maybe this has something to do with myFav.
are you with T-mobile ?
No
Hi
No I'm not with T-mobile , I'm from jordan .
Get JF ADP1.1 or Haykuro's firmware. MyFaves is causing it, and sending SMS thinking you are on T-Mobile.
Thank you , i will search for JF ADP1.1 , but is there anyway to restore it as i got it ?
as I guessed in my first reply, since you are not with T-Mobile and you have myFav preinstalled, it sends sms to the service provider. Its an application that has to do with a plan provided from T-mobile.
this link includes the latest builds of JF including ADP1.1h.
Thx alot
Thanks allot Nayyak and coolbho3000 i have downloaded the holiday update by JesusFreke and its working , though i still want to ask if there is a way to get my phone back the the original 1.1
another problem
Hi
After I have installed JFv1.43_Holiday.zip , and every thing was cool , untill i decided i want to call my friend and each time i enter the dialer or some one calls me i got the following error
The process android.process.acore has stopped unexpectedly . please try again
i have restarted the device i have tryed again over and over but nothing changed .
Thank you in advance
Re-download update, wipe, install, wipe. Fixes 9 out of 10 bugs.
mshayeb said:
Hi
After I have installed JFv1.43_Holiday.zip , and every thing was cool , untill i decided i want to call my friend and each time i enter the dialer or some one calls me i got the following error
The process android.process.acore has stopped unexpectedly . please try again
i have restarted the device i have tryed again over and over but nothing changed .
Thank you in advance
Click to expand...
Click to collapse
You should do a wipe when you change to a different build (e.g. from RC to ADP or vice versa).
Thanks
It's all good now , thanks all for the tips
official adp 1.1 is here:
http://member.america.htc.com/download/web_materials/ADP/signed-dream_devphone-ota-142608.zip
this is the complete recevery, image+ radio rom.
I rooted my mytouch 3g for tmobile and then decided to unroot it because it kept giving me errors when loading custom roms. Anyway i installed RC29 and Ive been having problems connecting to the Google Servers on RC29 so i tried to update to 1.5 or even 1.6 but when i try to install 1.5 or 1.6 android the progress bar goes half way on checking and then gives me an error like "error on line 1......" etc, I am about ready to sell the phone because I cant figure out how to fix this problem, can anyone help? The phone is useless if you cant activate it ! I wish I never went rooting around
Thanks in Advance!
Hey guys,
Like many T-Mobile G2x users i got seriously fed up with the poor gps K on the phone. When i first got my phone, after i rooted it I tried many of the roms here on the development forum but none of them could fix the gps locking issue. IN the past few days, the phone could not even "view" satellites at all. I was running the JUL 2011 baseband at the time. However after digging around, I went ahead and updated from the LG website with their update software. now my current baseband is M6600A-SCAUTNZ-2.0.9720T 1 [MAR 11 2012 10:00:00] MP:TRULGE_08.09.02R-MDM and gps functionality comletely came back. I have a lock under 1 min, the phone still works for calls/text, and data still works.
I ran this process on a computer with Windows 7 Ultimate 64-bit. After the LG update completes it will revert the phone to stock recovery.
Here is a step by step of what I did. Please read everything first before doing the steps.
1. Use TGA_Gunman's guide to restoring a stock Nandroid OS that is unrooted. http://forum.xda-developers.com/showthread.php?t=1048274
A Stock ROM (v21e, v10f, or possibly others) is required for the "LG MOBILE SUPPORT TOOL" to work. Either from a personal backup or downloaded. Recovery version doesn't matter, but suggested to have latest CWM to make Nandroid backups & restores easier.
2. (optional) After you boot into the system link your google accounts, just as you would when opening a phone for the first time.
3.Visit LG's Website and download the T-Mobile LG G2x software update tool.
http://www.lg.com/us/support-mobile/lg-P999 (click on the software update tab and follow the 4 steps)
4.After installing LG Update software on your computer, run it, and follow the steps it tells you exactly.
5.Have PATIENCE! This will take around 15 min. and patience is the key. Let it sit there and do it's thing. Make sure your computer doesn't turn off or go into standby during the process and don't disconnect your USB cable until the installer is at its last step and its tells you it's done with the update.
6. Enjoy your functional gps!
P.S.: Thanks to everyone for the helpful feedback and tips to making this guide better!
If you are looking to downgrade your baseband or have unknown baseband error check out xBkKx's guide http://forum.xda-developers.com/showthread.php?t=1680292
EDIT 06/2/2012:
The CM7 RC3 update has been verified that it will work with the new March 2012 baseband. If you wish to update to the rc3, apply a "dirty flash" of the 27th nightly update after it (this resolves the gps locking time back to a couple of seconds again).
CM7 RC3 Update link : http://download.cyanogenmod.com/get...t/archive/update-cm-7.2.0-RC3-p999-signed.zip
CM7 27th Nightly Build: http://download.cyanogenmod.com/get/jenkins/1991/update-cm-7-20120527-NIGHTLY-p999-signed.zip
Why wouldn't you have calling/data after updating only calling issue is people not wanting to stay stock with this baseband.
You don't have to be on that nandroid or link your Google account prior to the update.. I restored my rooted stock nandroid downloaded drivers, installed lg tool and it updated fine as I just walked away and came back to it sitting in home screen with new baseband
Sent from my LG-P999
xBkKx said:
Why wouldn't you have calling/data after updating only calling issue is people not wanting to stay stock with this baseband.
Isn't there already guides to update the phone?
You don't need to be on that nandroid or link your account.. I restored my rooted stock nandroid downloaded drivers, installed lg tool and it updated fine as I just walked away and came back to it sitting in home screen with new baseband
Sent from my LG-P999
Click to expand...
Click to collapse
When i said calling/data still works i was referring to what some other people in the forums had said that they couldn't get a signal after updating baseband. I, however, did not find anything about using LGs update tool on windows 7. All the topics that came up were about procedures on doing it with windows xp only.
If this way works with the other nandroid versions that thats great news . However, when i was on the July 2011 baseband and I loaded one of the other stock nandroid versions the earpiece and microphone were not working at all. I could place/receive calls but the other person could not hear me nor could i hear them. when I loaded the v10f stock this problem did not come up, so just to be safe I recommend using that one.
Also you said there's calling issues for people that want to use other roms with this baseband? Does that mean I can't load up one of the recent EB ICs roms, etc with this baseband version?
call audio doesnt work with newest baseband and modded roms (tother than kwes's and buru's, both of which are based on V21Y). it just clicks and pops unless you are on wifi calling. basically devs need to start basing their ENTIRE rom on this baseband if they want call audio to work.
BuddhaTeh1337 said:
call audio doesnt work with newest baseband and modded roms (tother than kwes's and buru's, both of which are based on V21Y). it just clicks and pops unless you are on wifi calling. basically devs need to start basing their ENTIRE rom on this baseband if they want call audio to work.
Click to expand...
Click to collapse
actually now the 27th CM nightly update and the CM7 rc3 update have fixed the in call audio problem. im running this update with the new baseband on my phone and everything is working fine. the only thing that doesnt work yet are the old ROMs .hopefully devs do something about that
I also updated from rooted stock (xboarders 2.3.3). I didn't go back to stock recovery. I just ran the LG updater (already had drivers installed), plugged in the phone, hit the update button, and let it do it's thing. It took about 20 minutes
I'm confused about all of the confusion.
XDA Mobile
Hi all,
I did the above procedure, and did the restore from the "LG-P999-V10f" image.
On reboot, the phone comes up and shows the stock "LG" boot up screen.
The scrolly thing goes across for a bit, and then *stops*!
At this point, it is locked up, it won't boot any further up, and when I attempt to use the LG Updater tool, it does see the phone, and says "Phone connected", but the 2nd part of it when checking the phone communication, it fails with "Problem with communication between the cell phone and PC".
So I am stuck...
(Hopefully not bricked?)
Any thoughts? Suggestions?
Thanks!
Scott
I figured it out, after some minor panic!
The problem was, my ClockWork Mod Recovery bootloader version on the phone was too old!
I used a factory ROM image that was taken from a newer version, and it included some (.tar's I think) file types that weren't supported on the old version of the Recovery.
Thus, I burned an incomplete version of the stock firmware to the phone!!!
(Which is why it was stuck at boot!)
I was able to "One Touch Recovery" with a newer version of Clockwork Mod, slap my Backup of my CM in place, and get back to where I started.
And as part of the "One Touch Recovery", it updated my boot loader to a newer version, and so now the loading of the factory ROM image worked.
I then just ran the LG Updater software after going back to the factory ROM Image, and indeed, it finally works as expected!
Scott
Glad to hear that it worked Scott! And thanks for the feedback, i have updated step 1 to say you need latest version of clockwork recovery
It looks like LG may have taken the update file down, or for whatever other reason, the software update tab is blank. Could someone put up a link to the update file?
@sigmabeta: I noticed during a particularly slow page refresh that the links for the usb driver showed up briefly as the page loaded, then disappeared. I managed to stop the page from loading completely and got the 4 steps listed (under manuals, of all places) one of the links was the update tool, here is the link:
h-t-t-p://csmg[dot]lgmobile[dot]com:9002/clientapp/B2CAppSetup.exe
I downloaded it successfully from there. Enjoy!
(sorry I'm new and it won't let me post links yet)
LG update tool won't update
I managed to download it from LGs site, but despite flashing the v10f rom onto my phone, the update tool says software version is 11f (even tho the phone info shows 10f) and that it is up to date, and won't let me perform the update. Baseband is still Jun 2011. Any ideas, or a link to the version of the setup tool you used?
aft3rgl0w said:
I managed to download it from LGs site, but despite flashing the v10f rom onto my phone, the update tool says software version is 11f (even tho the phone info shows 10f) and that it is up to date, and won't let me perform the update. Baseband is still Jun 2011. Any ideas, or a link to the version of the setup tool you used?
Click to expand...
Click to collapse
hmm. im not sure about this one. try this: reboot into clockwork recovery mod and do factory reset . after clear your cache, then clear your dalvik cache. then install the v10f from the restore menu in clockwork mod . after restart, set up your phone as you would do for first time (link google account to it) and then plug it in to your computer and run the LG update tool. thats what i did and it worked for me
also you said version v11f? you must have not flashed the restore correctly. do the above.
The first time I flashed it, I followed the instructions, which said to factory reset AFTER the flash, but I did think of what you suggested and tried it again, factory resetting, clearing cache and dalvik twice before restoring, but the tool is still saying the SW version is 11f. If I go to Customer Support -> Update history, it shows SW v21e (even after reading phone info). Phone info SW ver says LG-P999-V10f. Weird. Should I factory reset/cache/dalvik _after_ flashing the v10f rom as well? i'll re-download it again and try in the morning. what version of the LG updater tool do you have? mine is v1.5.7.0. many thanks for your help.
aft3rgl0w said:
The first time I flashed it, I followed the instructions, which said to factory reset AFTER the flash, but I did think of what you suggested and tried it again, factory resetting, clearing cache and dalvik twice before restoring, but the tool is still saying the SW version is 11f. If I go to Customer Support -> Update history, it shows SW v21e (even after reading phone info). Weird. Should I factory reset/cache/dalvik _after_ flashing the v10f rom as well? i'll redownload it again and try in the morning. what version of te LG updater tool do you have? mine is v1.5.7.0. many thanks for your help.
Click to expand...
Click to collapse
yes. you should do a complete factory reset even after installing the v10f rom. this is detailed on the original post on how to flash back to stock rom in TGA_Gunmans post.
I just noticed too that it reverted back to froyo (v2.2.2) and not GB, could this be part of the problem? should the stock be 2.3?
just to clarify your last reply re factory reset after v10f flash - should i clear dalvik as well?
yes it should revert back to froyo. and yes reset the dalvik cache too
Have you tried the V21E? I just flashed back to my Jul baseband and restored my 2.3.3/V21E nandroid and the updater found the 2.3.4 release instantly for my phone
Sent from my LG-P999
xBkKx said:
Have you tried the V21E? I just flashed back to my Jul baseband and restored my 2.3.3/V21E nandroid and the updater found the 2.3.4 release instantly for my
Sent from my LG-P999
Click to expand...
Click to collapse
yes you could try the 21e. however for me, that version always failed to download from the website gunman uses to host those files so i used the v10f inatead. much faster download.
btw how do you revert back to a previous baseband?
I just Googled how to do it using like 6 different guides :/ I edited my thread on iso help on it with what worked for me if you want to try it: http://forum.xda-developers.com/showthread.php?t=1680292
V21E/2.3.3 Mirrors, just restore it, connect phone to computer, run updater, should go smoothly :
Dropbox
MediaFire
RapidShare
Hi guys!
Recently i buy this Photon Q 4G LTE Sprint to my wife's birthday.
It's a wonderfull device with a nice hardware, but the best is the external keyboard (She likes it, because his old device was Motorola dextr, and she was used to), but we're from brazil and my first difficulty was to find a rom that support drivers without bugs.
So here i was: My first try was MIUI. I unlocked my bootloader, rooted and installed TRWP. Didi Backup, formated and installed MIUI, :good:
First i tryed with Kernell the UFO developed for it, and the device don't boot. After i tryed just the rom, but it has no modem or wifi. So i flashed up the stock rom modem img and worked fine.
But apks like "retrica" doesn't work with it, bringing black photos and others apks made for instragram. I love this rom and i have installed in my Xperia Play. It works perfect, but in this device have a lot of bugs, so i give up.
I know how to use it with bugs, but not my wife. Then i had to try another one.
I downloaded Cyanogenmod CM10.1, CM10.2, CM11 nightly, snapshot. Then after try all "Xt897" roms, i tryed all "moto_msm8960".
I can't get in any of this roms make my wifi or 3G work. I believe that modem is not compatible. Even if i tryed to flashed stock modem after, i still had no signal at all. No IMEI, no MAC Address, nothing. :crying:
This device have few alternative roms, so i decided try to translate the rom with less bugs at all. I picked up the stock rom JellyBeans 4.1.2, but this was my second failure. A language patch is something that you don't find in market, and to disassembly entire rom and work in a translate is something beyond my knowledges.
So i have an answer to someone that know how to do a fix patch to wifi in cyanogenmod(Specific "cm-11-20140518-NIGHTLY-moto_msm8960.zip" ), or someone good in translate rom, or input a language in stocked rom, like The Solutor did in " [Full ICS ROM] Multilanguage/Toggle2g /STK/Tethering" (but the rom he used was 4.0.4 and it have bugs).
I will be grateful for any help. :fingers-crossed:
Hmm, what's the language you want (CM11 already have lots of them - not in the list?), and what WiFi/3G problem are you having? And you also failed to RSD the phone back to stock?
My recommendation is you first sort the RSD thing out and get the phone back to stock 4.1.2, and flash everything from that onwards. Assuming that you don't do anything wrong in the process, you should have no quirks with WiFi/3G.
Sent from Google Nexus 4 @ CM11
Try MoreLocale2 for the stock ROM language issues.
As for the CM issues... I agree with Andy, if it works in stock form, it "should" work on CM - at least that has been my experience.
You are clean wiping / factory resetting before or after flashing CM yes? I see you have done this step for MIUI, so I am thinking that you have already done this step...
If you have, can you provide logs from CM if the wiping/RSD'ing doesn't work?
Thx for help guys...
AndyYan - The language i need is Portuguese(Brasil) and it has on CM 11 and MIUI.
I did it as you said. I downloaded stock from here:
http://sbf.droid-developers.org/phone.php?device=3
Rom version: Android 4.1.2 - Blur_Version.98.10.5.XT897.Sprint.en.US)
And flashed by RSD.
Everything ok till here. No errors, nothing wrong. Wifi working as well, and the network.
My MIUI was taken from here: http://forum.xda-developers.com/showthread.php?t=2444449 (GSM one).
Cool rom, it has wifi and network, but camera bugs with some apks. For me ok, but not for my wife. So this rom was discarded.
CM i dwonloaded from here: http://download.cyanogenmod.org/?device=moto_msm8960
The last one was: cm-11-20140521-NIGHTLY-moto_msm8960.zip (i tryed all of then "XT897" and "moto_msm8960", but none of them could get my network working. No wifi, no IMEI, no MAC, no wifi).
CM was my hope, because it has my language, but in all tries i did the wipe in cache, dalvik, system, factory, even internal memory, before installing, and cache or dalvik after flash. I tried this in all (tried not wiping too) and still has no modem.
After this, just for try, i flashed stock modem "NON-HLOS.bin". Still got no modem in any CM roms.
arrrghhh - i did try "MoreLocale2" for the stock rom, and "Set Locale and Language" (and more). This softwares did a nice job for keyboards and apks, but system stays intact in english. It need to be a real translation for my wife.
My guess is that this issue can be easily solved.
If all JB roms have the same system(at least for "moto_msm8960" processor kind ).
This ROM is generic for Motorola Atrix HD, Electrify M, Photon Q, RAZR HD, and RAZR M right?
Razr HD is a type of phone that came to my country.
Is it possible compile a system from Brasil career stock, for this phone with modem and anything else from my stock rom? Does it will crash my phone?
Please provide logs from the latest build of CM after booting and attempting to engage/connect to wifi.
Logs??
Sotty about my doubt, but i don't know what kind of logs do you want(i'm not used to).
Logs from TWRP in instalation?
This is easy. Installation was made with no errors and succesfully.
Does CM made logs itself??
If does, i dont know how to get them. Please send me a link.
Skymidt said:
Sotty about my doubt, but i don't know what kind of logs do you want(i'm not used to).
Logs from TWRP in instalation?
This is easy. Installation was made with no errors and succesfully.
Does CM made logs itself??
If does, i dont know how to get them. Please send me a link.
Click to expand...
Click to collapse
CM does create logs. If you're not familiar with them, the easiest way is to use an app from the Play Store... which I'm not sure how you will manage without wifi or mobile data, and I assume you are not familiar with adb.
I can go thru the detail, but it's a bit involved. Perhaps this thread will help you?
Once you know how adb works, there's actually an easier method than using adb logcat to output to a file - there are logs stored in '/data/logger'. So:
Code:
adb root
So you can have the permissions to pull the files, then pull them:
Code:
adb pull /data/logger
Will pull all of the log files to wherever your command prompt is. If you 'cd' (change directory) to your desktop, doing the adb pull will send all the log files to your desktop.
Let me know if you have any questions, good luck.
Logs from Adb
Yeap! I'm familiar with ADB!!
(i'm not expert in it, but i already did something with that...)
I don't know exactly what are you lookin for, so i did two logs.
First a complete boot:
Code:
adb reboot system
adb logcat -v long > boot_log.txt
And one for especific modem log from boot
Code:
adb reboot system
adb logcat WifiStateMachine:E *:S -v long > just_wifi_error.txt
(I believe this this won't help u a lot?!)
The first one is the most complete solution for this and have all the boot infos, errors and other things.
If am i wrong please say the correct command to use.
I forgot something...
In filemanager i can't access internal storage.
It shows /storage/emulated/0, and points to nothing.
If i'm right, this was a well know bug on CM 10.2, which supposedly been fixed in CM 11 right?!
I think that information can help to solve this bug...
Please try the adb pull command I sent... Those logs are not very helpful, and quite difficult to read.
However, I have a feeling if you use RSD Lite to flash everything back stock, confirm it works, then start with the latest CM, I'd be curious if it works.
Also, someone mentioned they needed to install the CM10.2 snapshot before going to CM11 - or else BT and wifi did not work.
Eureca...
That is something that i didn't tried! I'd never flashed CM 10 in first!!!
I'm downloading "cm-10.2-20131102-SNAPSHOT-M1-xt897.zip ".
Fisrt i'll flash stock "Blur_Version.98.10.5.XT897.Sprint.en.US" with RSD.
Then fastboot "logo.bin" (to avoid warning unlocked), and TRWP(my stock have a original recovery that can't install CM. I can edit XML, but to cleanse my conscience i'll let this way).
After i'll install "cm-10.2-20131102-SNAPSHOT-M1-xt897.zip" with TRWP and boot with this one.
Then i'll flash "cm-11-20140526-NIGHTLY-moto_msm8960.zip ".
But i'll have to do this at night(it's 12pm here), because i'm working today.
If that don't work i'll pull the log that you said here, but I come back to thank.
Same problem
I confess I was hopeful in that case you said to flash first the CM 10.2.
But again failed. I tried two ways:
In both I tried to install the Snapshot CM 10.2, then the CM 11.
There is no way that cell boot with "CM 10.2" in any case. That saty on boot animation for several time(i waited 30 minutos each).
In the first I downgraded to version 4.0.4 stock to see if the modem worked.
After that i flashed CM 10.2 that stood in boot animation, then CM 11 booted without modem signal (no wi-fi, no signal).
I taked the log for that version (attachment named log_4.0.4.7z)
On the second attempt, I used the default stock 4.1.2.
After CM 10.2 which was stucked on boot animation again, then CM 11 again booted without modem signal (no wi-fi, no signal).
I taked the log for that version (attachment named log_4.1.2.7z)
Strange thing happened on both CM 11 boot. When the system's load, it shows a message "The clock stopped". This is strange thing for me.
Can you wait for CM10.2 to boot...? There is a fsck process which sometimes takes quite a long time to boot.
Also, for your FC issue - you are clean flashing the ROM everytime? You are doing a factory reset everytime you flash a new ROM?
Edit - looking at your logs, I don't think the fsck is the issue... something is causing the CM10.2 boot to die over and over. Please try clean flashing...
I clean everything before.
Yeap. What do you call a clean flashing?
Everytime i flash some ROM, i do factory reset, clean cache and dalvik.
The ROM is flashed on a clean state of the stock one. Is this the clean you are talking about?
CM was taken about 30 minutes to boot, and yet don't load system.
This is why i stop that and flash CM 11 over it.
Is this time bigger than that? How long your cell take to boot this CM 10.2?
Skymidt said:
Yeap. What do you call a clean flashing?
Everytime i flash some ROM, i do factory reset, clean cache and dalvik.
The ROM is flashed on a clean state of the stock one. Is this the clean you are talking about?
CM was taken about 30 minutes to boot, and yet don't load system.
This is why i stop that and flash CM 11 over it.
Is this time bigger than that? How long your cell take to boot this CM 10.2?
Click to expand...
Click to collapse
Yes, factory reset == clean flash.
As for the long boot, I'm not sure the fsck is your issue - basically there is a process which runs a disk check, and sometimes this will make the boot take quite longer than usual. I can't say how long, I've never personally experienced the issue.
However, the fact that CM10.2 isn't booting is a little disturbing. I've heard some people report 45-60 mins... can you do me a favor, charge up the phone, and try to let it boot for at least 90 minutes?
If at the 90min mark it still hasn't booted, pull logs and post them.
Thanks.
The logs contain references to apps that are present only in stock firmware.
That means the CM boot is actually not happening in a clean environment (the data wipe/factory reset in TWRP hasn't worked as it should?).
Please try to use OpenRecovery 2.09 instead of TWRP (as OR is the recovery I personally use and watch for possible bugs) to wipe the device and to install CM11 - http://forum.xda-developers.com/showthread.php?t=2211579&page=10
When installing CM in recovery, you will probably also want to install the gapps package - http://wiki.cyanogenmod.org/w/Google_Apps
Btw., CM11 expects the baseband (modem) and other partitions the be at the 4.1.2 stock level. Experiments with 4.0.4 are useless.
Please post the logs from CM11 boot.
You will need to enable the logger under CM11 by
Code:
su
setprop persist.log.aplogd.enable 1
in Terminal app or ADB shell, it's not enabled on CM11 by default.
Links are broken
Hi... My TRWP version is "openrecovery-twrp-2.7.0.1-asanti_c.img".
Something is not ok with this one. Sometimes this one format the cache, sometimes not.
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
I want to install this one that you said, but those links in the post you sent are broken.
Can you please send me another one?
Skymidt said:
Hi... My TRWP version is "openrecovery-twrp-2.7.0.1-asanti_c.img".
Something is not ok with this one. Sometimes this one format the cache, sometimes not.
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
I want to install this one that you said, but those links in the post you sent are broken.
Can you please send me another one?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=48551561&postcount=75
I'm on an older version of TWRP, and it has never failed me... that's a shame really. I'll try to update and see what's what. In the meantime, flash OpenRecovery I linked above ^^.
Skymidt said:
I have to do it a lot of times and when i try to format data partition, this just reload the TWRP.
Click to expand...
Click to collapse
TWRP 2.6.3.x should also work properly.
@arrrghhh, so you see it's not just me having the "wiping /data reboots the recovery" problem... I've already sold my PQ (might buy a new one in the future), but please do help let this problem be known to whoever's developing TWRP for us
Sent from Google Nexus 4 @ CM11
I can't believe it works
Unbelievable! :laugh:
This very simple solution worked for me.
My TRWP did not work right.
He said he had done successfully in cleaning the cache and manufactures, but did not.
I downloaded the link you guys sent me and it worked on the first try.
Not needed before installing CM 10.2. Already installed in the first CM 11, has worked with modem and everything. Now I can configure the GSM network my country and language of the country for my wife (PR-BR).
I want to thank the efforts of user @ AndyYan to respond, the attention given by the user @ Arrrghhh teaching me with patience, and the solution given by the user @ kabaldan. :victory:
You are awesome for this forum. Thanks for everything.
If you still want the log I get, but I think with everything working, you guys should already know the outcome.
I recently ran into the issue during custom rom work. I reflash the stock android ZIP, it starts booting, then I hard reset it with the power button and try to reach bootloader again. This, as it turns out, is terrible to do if you want a fast setup. The moment it starts and you reboot it, the boot image is corrupted (that's my guess) because escaping the boot screen during a clean flash bricks your phone. If you're reading this, it happened to you as well.
The answer is so flipping obvious and it took me an hour to figure it out - nowhere on the internet is there a "solution" for this problem, no matter how frequent it is. But there are lots of people who deal with this, whether still on their factory images (like the Pixel 3 EDL issue) or like me bouncing from custom to stock. So here's the answer:
ALL YOU HAVE TO DO IS SIDELOAD THE CURRENT SOFTWARE OTA OR A BETA OTA FROM ANOTHER FUTURE VERSION.
It doesn't recognize timestamps before your current software, so you'll need to assume you're on the latest of whatever you're on and do that. Future versions work as well, so if you wanted to reach 12 in one shot, your phone's bootloader would fully accept it as long as the file isn't corrupted. If you need a sideloading or flashing guide, here you go.
For me, I flashed the latest build of Android 11 (August patch) and rebooted during the boot up. What I did was download the OTA of the same exact file to my laptop, and entered adb sideload coral.xxx.x.zip. (The name of the file) It ran all the way through and it started up perfectly normal.
I hope this helps someone!
P.S. I don't have any pictures or tutorials, I only wrote this to help others understand what happened and how to fix it. Probably wouldn't have needed to say it if the forum for it existed.