Related
Hello dear Developers! firstly u can be sure that i read all of the document before i post here.Well, i have a really serious problem on my nexus s i9020, i am going to explain u now;
i was using android ics 4.0.3 than i wanted to root it, i unlocked firs than i rooted according to illustration of nexusshacks.com than i root it, after i used that for a while,i install the titanium backup than i found the notice that ''root access hasnt found'',after that i tried to root it again than i found a special exe file called that easyoneclickroot or something like that. i used it but after my nexus hasnt turn on anymore:'(
i can enter the bootloader menu,i have got a clockwork menu and more, but i can install android ics 4.0.3 again, i instelled the cyavogen instead, but i hadnt any signal, i mean network,when i try to install stock rom its fail called with ''installaion aborted'' and error in sd card ....... zip
now i am trying to install IMM76D_deodexed.zip file on nexus s i hope its gonna be okay! before that, i format the system, cach,sd card and everything coz i thought that its better,
could anyone help me please
now it is working but without mobile network please help!!!
i installed IMM76D_deodexed.zip it made my nexus s okay bur i dont have mobile network. i check my imei and its same as before,what should i do ?even i tried *#*#info#*#* setting,however i cant save this setting there is no anything abot save the new setting or something like that, i am very beginner please help me plsssss
pleaseeeee!!
I promise that i ll never hack my nexus s !! please help
morissadioglu said:
Hello dear Developers! firstly u can be sure that i read all of the document before i post here.Well, i have a really serious problem on my nexus s i9020, i am going to explain u now;
i was using android ics 4.0.3 than i wanted to root it, i unlocked firs than i rooted according to illustration of nexusshacks.com than i root it, after i used that for a while,i install the titanium backup than i found the notice that ''root access hasnt found'',after that i tried to root it again than i found a special exe file called that easyoneclickroot or something like that. i used it but after my nexus hasnt turn on anymore:'(
i can enter the bootloader menu,i have got a clockwork menu and more, but i can install android ics 4.0.3 again, i instelled the cyavogen instead, but i hadnt any signal, i mean network,when i try to install stock rom its fail called with ''installaion aborted'' and error in sd card ....... zip
now i am trying to install IMM76D_deodexed.zip file on nexus s i hope its gonna be okay! before that, i format the system, cach,sd card and everything coz i thought that its better,
could anyone help me please
Click to expand...
Click to collapse
First of all, rtfm before using Google devices.
Search for external antennas on ebay in case you have flashed /removed baseband/radio side of your rom. Be careful that you are exactly searching antenna for your Nexus S, not for any other devices.
Last thing i would advice is, rtfm...
i ll never been a douchebag!
i reckon i should flash the radio suc as xxkk6 or like that, hovewer i have no idea how to do that, would anyone help me please ?
I work out this crappy problem!
Thanks dear developers:
we did this problem with dear fanno,i didnt search any external antenna from ebay but he gave me a some special software and we did it, u can tell us if u have same problem about ur baseband or imei !!
Thank you MR.fanno !!
is anybody need help? tell me !!! i am the junior developer
Unfortunately my nexus s turned into nexus ass !!!! However thanks for your helps, u r so hospitable !!!
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
root alcatel ot 983
ahkronn said:
Hello, and hope this is the right place to post this.
So, without any knowledge about all this smatphone/android stuff, I finally got one by a really good price. An ot-983.
Some friends conviced me to root it. I found a way to do it and noticing all the bloatware from it's original carrier (this phone was carrier unlocked when bought) I decided to clean up a bit.
I ended up cleaning a lot of stuff that I simply didn't use from a \custapp\ folder in there.
Thing is, a day latter I got a notification of a firmware update and I just said yes.
The said update failed, complaining it seems about the lack of some of the deleted bloatware.
Now, here's when the lack of thinking shows.
Wondering about it, I decided to look around options and found the factory reset.
Being a new and mostly empty phone, I did it (wiped clean the sd too),
And there, it went all into hell!
After reboot, it can't get my wireless anymore (have to use a static ip workaround for it...)
Root Checker says it's not properly rooted (using the same rooting technique as the first time doesn't fix it)
superuser still seems to be working, altho it crashes now and then with some errors about permissions.
also, can't get BusyBox working because it says there's no su binary and I can't download an update for it.
In short, I guess I need to get this phone to it's basics, if possible unbranded.
I don't really know what I need for that, but here I am, reaching at you that might help
I guess I need a stock rom and a way to flash it.
I'd appreciate a lot any help on getting whatever it is needed.
*cheers
Click to expand...
Click to collapse
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
mohamm said:
pls i need you to explain to me carefully , step by step how you rooted the alcatel ot 983 , pls i have searching for the past weeks on google without results , pls help me , pls explain carefully , thanks in advance , i will be so happy if you help , thanks again in advance
Click to expand...
Click to collapse
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
I need original stock alcatel ot 983 rom
hi guys
I bricked my ot 983 after flashing with different alcatel models rom
can some one please give me a copy of original stock rom for alcatel one touch 983
please
my email [email protected]
maybe your handheld is a brand new and nobody mod it yet
be patient bro and keep searching in google with any keyword
help me make tutorial on youtube
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
bro i dont know much about android stuff , but pls can you make a tutorial on youtube like this you can help me and millions out there for rooting the phone , ps help and thanks so much in advance
ahkronn said:
I simply downloaded the drivers from alcatel website
and then used the root package from here: <can't post outside links. it's a thread on error-soft dot net
Followed the instructions on the .txt included and it worked.
After that I think I had to install Superuser app (from live store)
be careful. My problems came from deleting some stock apps included and then doing a firmware update.
so, don't delete stuff around if you're thinking in doing the upgrade.
Click to expand...
Click to collapse
Where did you get the upgrade from ?
My story is like this: rooted, uninstalled some bloat from system and after a factory reset I'm stuck in the initial setup wizard (after completing almost all stages from setup it crashes at the end, after connecting at the google account - tryed to ignore that step but either way it crashes). Fastboot works but adb don't.
I do have another identical phone Alcatel One Touch OT-983 but with no root, with no modifications. Is there a way to backup the original/stock image and flash it over the malfunctioning one and restore it??
I tried with the proprietary upgrade tool from Alcatel but no succes as it close saying I don't need an upgrade because it's the last version of software installed in my phone. I thought even to broke intentionally the rom but I'm afraid that the upgrade utility from Alcatel will let me down, as I read that another users didn't managed to complete successfully the upgrading process. Is there a way to trick the system that has a previous version of Android?
Thank you for taking your time to read this and hope someone has an idea to solve our problem.
Have a nice day guys, you can contact me at puiocku at gmail dot com.
Have someone this stock rom (for Alcatel One Touch 983 (Valencia)) ???
Here is a Alcatel OT-983 rom, not sure which country it is from: https://www.dropbox.com/s/g2ljtrpqru3uihm/rom 983.zip?m
Here is my o2 uk backup rom: http://www.mirrorcreator.com/files/C4VEKHEI/OT-983_backup_uk.rar_links
this .zip file contains the boot.img, system.img and recovery.img
Someone needs to create a clockwork mod recovery for our phones now.
here is the sourcecode for this phone: http://www.mirrorcreator.com/files/85KDRTYP/OT_983_20130103.7z_links
Can't get to recovery
I have a bricked rooted OT 983, by error i installed a ZTE Blade's CM9 ROM and now i can't get my phone to recovery by using ADB that is the only way, i have downloaded the stock ROM but i don't know how to install it. :crying: PLEASE HELP!!!!!!!!!!!!!!!!!!!!
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Possible solution for getting back original ROM on "stuck" phone
ryanraven said:
i done the same
Please help!! my phone is stuck on
jrdsetupwizard has stopped
cant get past setup screen
Click to expand...
Click to collapse
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
to Hajj_3 :
Tanks for share the ROM.. I need it to recover my friends phone..
I just got this phone, not looking to root it yet as theres no option for a custom rom yet.
didnt want to start a new thread as theres not really any section for this phone yet.
Everything was fine until i installed the firmware update. Now applications cannot access the mic. Some complain about it being in use by another app. others like video editor or sound recorder will record, but the video recorder there is no file, and sound recorder crashes when you hit stop.
Alcatels website is useless, wasnt working yesterday, today it is but cant find any contact details incase its a bug in there firmware. Everything works fine except for that. Which is annoying because i use RTA software and now it doesnt as it cant access the mic.
any ideas?
Hi guys,
I've rooted my phone with abd and udpate.zip a long time ago, and it was fine till some days ago it stopped from receiving calls and the home button does nothing when pressed, although in recovey mode it works.
I've done a hard reset, reflashed the recovery.img, system.img and boot.img I've found in this post with fasboot, but did not solve the problem.
I've tried a firmware update with Alcatel's own software but it just keeps saying my firmware is updated already. I've also tried to edit the proinfo file, but I don't know what to change in the file. You can see more about that method here: http://forum.gsmhosting.com/vbb/9772370-post8.html
My guess is that the files that are corrupted and preventing me from receiving calls are somewhere else than those img's I've flashed. Has anybody got a FULL backup of his rom (e.g. Rom Manager) so I can recover the phone completely?
Thanks!
upgrade software
bussand said:
I recently "semi bricked", if my Alcatel OT983, if that's possible. It would not boot fully and got stuck on the "jrdsetupwizard has stopped" screen.
Here's what I did. The issue with getting the Alcatel One Touch Upgrade software to work appears to be getting the correct USB Driver installed. There are a number of potential USB drivers. This phone needs the driver in the Alcatel One Touch Upgrade. The stock Windows one or the one used for rooting the phone using instructions from the errorsoft website from the oneofgod will not work with this upgrade procedure.
1. Download the Alcatel One Touch Upgrade software and install on your machine. Open up the folder where the software is installed.
Look inside the folder that is called USB Driver and look inside the appropriate folder for your type of Windows machine 64bit or 32bit (x86) and install that driver for USB - that is the correct one for the upgrade
2. Run the upgrade software whilst connected to the internet. Connect your phone when it is off. You should just get the Android icon i.e. not charging or anything else. The icon should just stay there all the time the process takes place.
3. The upgrade will download. It's when the process gets to about 70% that the phone the starts upgrading. It will take a few moments but when it starts progressing into the late 70s and 80s you should be well on the way. At least that's how it went for me and I got my phone back!
Hope this helps.
Click to expand...
Click to collapse
The problem is, the upgrade software link doesn't work anymore :\.
ht tp: // ww w1. alcatelonetouch.com/global-en/ support/download/one_touch_ 983.html
(remove of spaces, im a new user so they won't let me post one)
Is there anyway someone can find a link for it because i have been searching for ages and haven't found one.
http://www.alcatel-mobilephones.com/global-en/support/download/one_touch_983.html
After official firmware update V1.06 (that has failed to update), the tablet doesn't work anymore.
There comes an error message: 'No command' and factory reset won't work.
How can I get my tablet in the state that he boots normally again?
*bump*
It's a urgent matter.
Should i buy the same one again under warranty? (because to send it back and wait is nothing for me) or are there methods to recovery it back to normal state?
Hay.
I have same problem, after OTA update somthing went wrong.
And my tablet saying "no command".
I don't know if other Cube users like you have the same problem with this tablet, because there is a chance that there is an defective/faulty stock with this problem.
I've contacted Cube and also the shop where i have bought the tablet about the problem. I think that is the only solution.
Hope we can get some solution to this problem.
Yes, I hope also.
Only solution i find thats working to put back stock rom.
And my tablet is live again
That is not something simple unfortunately.
I get answer later this week, so I'm curious.
Still in contact with the shop, I hope that there will be an solution soon.
Im afreid that you must put fresh rom.
This update is broken.
That is only possible if your computer has the connection with the tablet, otherwise that will not work.
My guess is, is that the update has wiped out the android files, so that there are no files to update.
Not exactly the same problem, but can't install update... It says: prob with build prop. I didn't change anything in it!
I tried twice, and the 1st time I had difficulty to reboot: I had to push on/off button during a log time to turn it off. After that the tablet started.
What kind of update manufactured Cube ?!
'The tablet can be refund or resend within a month if it has any quality problem.We have one year warranty for tablet repairment if your tablet has quality problem,but the damage by factitious factors is not included.'
That is their answer.
I thought on buying a new one, but I don't want to take the risk that this will happen again.
The alternative is not to update.
I don't know how the other cube tablets react on this update., but it seems fine on other models.
Here is the latest update for your tablets. I dont have one myself, I have the Cube T7, but the guy does it for all of them I think http://yun.baidu.com/share/home?uk=288410357#category/type=0
cube update
have anyone manage to download the updates from the site and care to share?
went there and it's all in Chinese and need to register with Baidu or some sort
How to install android 5.0 on cube talk 7 u51gt c8 ?please tell me....
Me to wants to know how to update to lollipop
Adnan malik43 said:
How to install android 5.0 on cube talk 7 u51gt c8 ?please tell me....
Click to expand...
Click to collapse
have you heard or found any info?
Adnan malik43 said:
How to install android 5.0 on cube talk 7 u51gt c8 ?please tell me....
Click to expand...
Click to collapse
h t t p:/ / getlollipop.xyz/update-cube-talk7x-quad-core-u51gt-c4-8gb-3g-black-to-5-0-lollipop/
Hello everyone,
i've run into a big problem that i can't the solution for.
I've wanted to unroot phone so i can delete some random apps which were preinstalled, like traffic manager and so. So i found somewhere link for rooting and unlocking bootloader. I rooted the phone and deleted the app Traffic Manager, but i also think i accidentely unlocked bootloader which since then caused BOOT LOOP.
Nothing woudn't work, except VOLUME + - and power button, which would force firmware install from micro sd card. I was spending 2 days finding my version for 2.3.6, and it was b896 or b892. I coudn't find any of those 2, so i tried the B952 for ICS (4.0.3 android system), and it worked somehow.
But now the problem is touchscreen in that system won''t work at all (touchscreen is working in general, i can see that by the light dimm), and when i go in recovery mode there is option to update touchscreen firmware ?? I can't seem to find anyone on internet who had that problem or needed that update for touchscreen. How to fix this issue?
Update: I found that the original rom is this: HUAWEI_Ascend_G300_firmware(U8815_Android_2.3_V100 R001C00B892CUSTSRBC128D001_Serbia-Telenor_05011ATB)
But problem is i still can't find any working links, does anyone have it by accident ?
sne me imie number of phone in pm so i can find u exect firmware for ur phone.
asadnow2k said:
sne me imie number of phone in pm so i can find u exect firmware for ur phone.
Click to expand...
Click to collapse
I've sent it.
Bump, still need help.
Bump.
Bump.
Any help ?
Bump.
Bump.
Bump, i've found it's version: HUAWEI_Ascend_G300_firmware(U8815_Android_2.3_V100 R001C00B892CUSTSRBC128D001_Serbia-Telenor_05011ATB)
But i can't seem to find any working links on internet, does anyone have this rom?
Ok here goes i played around tryin to root my phone the other night i used every different app on google play on all the forums and really just installed them all ..
Reason why i was tryin to root my phone with out using a pc. ( theres alot of apps going around sayin it can be donee. Anyway ive made a complete an utter mess of it.
Wont even with my telstra sim in ring msg or connect to internet. The phones useless and its my fault. Try make a call to any number and i get a msg sayin ( not registered on network ) msg same thing. Also done a full factory reset and still same thing.
So im guessing i need to some how get the s8 + sm-g995f adk original from Australia (telstra) to have any chance of my phone working again.
Please i need help with this i dont mind donating money to the xda fund or something.
Appreciate the time for who ever reads this.
Corey
Go to settings and look and see if you still have an IMEI number. If you don't you could be screwed...
Ouch....that's not god.
Rooting is easy, if you follow instructions.
As per the post above, does the phone show an IMEI?
It might be worth flashing the latest Telstra firmware. Get it from here: http://updato.com/firmware-archive-select-model?record=AB08410B7CA611E7963AFA163EE8F90B
Flash using these instructions: https://forum.xda-developers.com/galaxy-s8+/how-to/official-stock-firmware-update-odin-t3582175
And if you do get it working again, let us know. We can tell you how to root it properly