Database Info

{TUTORIAL} How I rooted my Epic using "One Click Root"

I take no credit for figuring out how to root the Epic, nor do I take any credit for creating the .bat file.
All credits go to joeykrim for the manual root. And noobnl for the .bat file.
I was having trouble rooting as many of you have been but I have figured out a simple solution that actually worked for me and I hope it works for you.
[STEP 1] First you need to make sure you have android's latest sdk. You can download it at http://developer.android.com/sdk
[STEP 2] After installation (if i remember correctly) sdk should of been installed into the root of your hard drive, normally (C:/). It will be labeled "android-sdk-windows" if you installed the windows version. To make things a lot more simple, you can rename this to "sdk". Anyways, download and install the Samsung Galaxy S drivers. This is the one I installed. http://www.mobile-stream.com/beta/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
[STEP 3] Go over to "One click root for the Epic 4G! v2.2.4 Now has Busybox & remount scripts!" and grab the latest zip file. I used v2.2.4.
[STEP 4] Extract the folder to the "android-sdk-windows" folder and rename it to "epic". Or something smaller if you want.
[STEP 5] Next open up command prompt (cmd). Start/Run/cmd or start/all programs/command prompt.
[STEP 6] In the command prompt, type "cd \sdk\epic" (sdk, and epic are to be replaced with what you have the folders named). Do not close command prompt.
[STEP 7] Type run.bat and let it do its work.
[STEP 8] Once the phone is rebooted, keep the phone connected and in that same command prompt type "adb shell" you should get a "$" symbol.
[STEP 9] Now type "su" and you should get a "#" symbol.
STEP 10] If you got those symbol's, then you are now rooted. Now go into the market and download "Superuser" by "ChainsDD".
You should now be rooted. This was tested on a Acer Aspire One netbook running Windows XP. If you are running Windows Vista/7, then the only different step you need to do is right-click the cmd/command prompt and select "run as administrator".
This was also done without mounting the sd card like some users have done to make it work. If it doesn't work, try mounting the SD card. If all else fails, restart the phone and try again. What I did was pull the battery out and then tried it.
As stated before, credits go to joeykrim at sdx-developers and noobnl from our very own xda-developers.
Have a nice day

OMG..... I GOT IT ROOTED YEEEEHHHHHAAAAA )))
Thank you so much for everyone involved in making this possible for all of us )

I'll add something I've noticed while fiddling around with all of the "one-click" installations:
Do not let your phone lock/go to sleep while they are running (step 7 above).
I couldn't figure out why they would work sometimes and not others (device not found errors) and I think this may have been it.
You can also launch the .bat by double-clicking it wherever you extracted it to instead of going through the command prompt to save a couple steps.
If this is way off base please let me know what is really causing the problem or just delete this post!

puppetmstr said:
STEP 10] If you got those symbol's, then you are now rooted. Now go into the market and download "Superuser" by "ChainsDD".
Click to expand...
Click to collapse
If you want to use the superuser app you need to do some additional modifications because the root method actually replaces su every time you reboot. I wrote the steps out in this thread. http://forum.xda-developers.com/showthread.php?t=788939

i finally got it to work for me
after several times trying to install and nothing just $ after $ after $ then i noticed the advise on removing the battery at the very end
so leaving the phone connect my cmd window still open i pulled the battery waited bout a 30 seconds then put the battery back in booted the phone
once the SD finished its scan
i ran the ADB SHELL and typed su and got the #
so thanks much for the help guide

richse said:
If you want to use the superuser app you need to do some additional modifications because the root method actually replaces su every time you reboot. I wrote the steps out in this thread. http://forum.xda-developers.com/showthread.php?t=788939
Click to expand...
Click to collapse
2.2.5 fixes this and comes with superuser.apk built in.

Folders one click root
cant seem to get my computer to see my epic when in debugging

[GUIDE] Easy and simple adb and fastboot setup for newbies (Windows only)

Linux users please go HERE (thanks to bloodychaos)​Similar guides can be found on other devices subforums around but I can see that a lot of new users in our forum are not familiar with the setup and use of this commands.
All the instructions and installation files can be found on the Android Developers webpage, but for basic commands it is not necessary to download the whole SDK (which requires the JDK as well) to follow installation and the resources download process.
*Important: to use the adb/fastboot commands you have to enable USB Debugging in your phone Settings -> Applications -> Development menu*
To have working adb and fastboot system wide for basic commands just follow the steps below:
UPDATE: Not necessary for Windows 7 is installng adb drivers automatically after plugging the device and fastboot ones after rebooting the connected device to bootloader. To get the HTC USB Drivers on different Windows version download and install HTC Sync (If you do not need the Sync application itself you can uninstall it but the drivers will remain on your system).
*According to post #5 in this thread in some cases may be necessary to temporary disable your antivirus software during the installation of HTC Sync. Thanks @mimirom*
Download the zip archive or the attached file below
Extract the archive on your C: drive. You will have C:\android-tools folder
Adding to the System Path globally to use the command without browsing to the containing folder
Method 1 (via GUI):
Go to My Computer icon -> right click and select Properties.
On the left side of the opened screen select Advanced system settings.
(Or Start -> Search -> type sysdm.cpl -> Enter, browse to the Advanced tab)
Look down on the opened menu and select Environment Variables.
In the lower half are listed the System Variables.
Scroll to find "Path" variable, select it and click Edit...
On the Edit window in the Variable value field go to the end of the line (do not delete it!) and add without any intervals (spaces):
Code:
;C:\android-tools
do not forget the semicolon symbol (;)!
Click Ok 3 times.
Method 2 (via Command prompt):
Go to Start and in the Search box type cmd, right click and Run as Administrator
Type
Code:
setx path /m "%PATH%;C:\android-tools"
and hit Enter. Close the cmd window
fonpacific said:
By the way, I noticed that it doesn't work for me (windows 7 professional) unless i end the path of adb with "\", for example: ;C:\android-tools\ and not ;C:\android-tools as in your guide.
Click to expand...
Click to collapse
Method 3:
bonesy said:
Just a tip, if you put the Adb and fastboot files in C:/windows/system32 (32bit) or in C/windows/sysWOW64 (64bit) you can just use them from any command prompt window
Click to expand...
Click to collapse
To check is it working properly open Command Prompt (Start -> Search -> type cmd -> Enter) and type adb
If everything is configured properly this should list you the Android Debug Bridge version and the available commands.
*HINT*: To use adb or fastboot with files in the Command prompt you have to navigate to the folder containing the file first (using the cd command) e.g. "D:\Downloads\Android" and then to execute the command.
Example:
Start -> type cmd in the Search box, then Enter. You will see
C:\Users\with blinking cursor
If your file is on another drive like the example type "d:" (without the quotes), or other drive letter to go to the relevant drive. Skip this if the file is on C: drive. Then type:
cd D:\Downloads\Android to go to the "D:\Downloads\Android" folder. If your path contains spaces (intervals) type it in quotes.
The command "cd.." brings you one folder back

Good Idea!
Have put a link to this within the GUIDES section of [INDEX][22 SEP 11] ROMS/RECOVERY/ROOT/HBOOT/RADIOS/TWEAKS/GUIDES/etc
I believe that the guide would be more useful if you put in a link to a URL for the HTC Drivers and moved the advice about enabling USB Debugging to the top!
I can now point people at this guide rather than manually instruct them, Thank's you probably just saved me loads of time and aggravation!

Nice Work, Great Help

Excellent! Exactly what I needed. Thanks for showing us this.

Hi an thank you. Good guide.
I believe one important information is missing in the guide:
Before installing the HTC drivers (or HTC sync) it is necessary to temporarily disable AntiVirus software on Windows machines. If you don't do that, Windows won't recognise your phone. After the installation is finished, enable AntiVirus again.
I got this advice somewhere and it was true for me personally. I'm using Windows 7.
Sent from my HTC Desire S using XDA App

One more comment:
This is a minor detail but I think it's worth mentioning.
If you are using the HTC Sync installation in order to get the HTC drivers only, you actually don't need to install and immediately uninstall HTC Sync itself.
The Sync installer will first install the Desired (pun fully intended ;-) drivers and the it will stop. Next it's going to ask you if you want to proceed with the installation of HTC Sync. At that point you hit cancel and you're done. No Sync, just the drivers.

mimirom said:
One more comment:
This is a minor detail but I think it's worth mentioning.
If you are using the HTC Sync installation in order to get the HTC drivers only, you actually don't need to install and immediately uninstall HTC Sync itself.
The Sync installer will first install the Desired (pun fully intended ;-) drivers and the it will stop. Next it's going to ask you if you want to proceed with the installation of HTC Sync. At that point you hit cancel and you're done. No Sync, just the drivers.
Click to expand...
Click to collapse
It's very useful, Thanks!!

Doing all this the phone has to be turned off, on, or power button and volume down?

Desire S said:
Doing all this the phone has to be turned off, on, or power button and volume down?
Click to expand...
Click to collapse
You do not need a phone for this guide It is setup for PC

Just a tip, if you put the Adb and fastboot files in C:/windows/system32 (32bit) or in C/windows/sysWOW64 (64bit) you can just use them from any command prompt window

bonesy said:
Just a tip, if you put the Adb and fastboot files in C:/windows/system32 (32bit) or in C/windows/sysWOW64 (64bit) you can just use them from any command prompt window
Click to expand...
Click to collapse
This is exactly the purpose of point 4 of the guide (global path setup)

Just trying to give another idea mate, I used to set up all the SDK and make a global path but now just drop them in those folders when i reinstal indows

bonesy said:
Just trying to give another idea mate, I used to set up all the SDK and make a global path but now just drop them in those folders when i reinstal indows
Click to expand...
Click to collapse
Agree, added to the first post.
Sent from my Desire S using Tapatalk

Instructions for Linux users???

jamsh said:
Instructions for Linux users???
Click to expand...
Click to collapse
On my Linux system I have installed Java and the whole Android SDK and the set the path of course. If you are a Linux user you should know how to do this. Also there are guides for other devices that are basically the same

amidabuddha said:
Similar guides can be found on other devices subforums around but I can see that a lot of new users in our forum are not familiar with the setup and use of this commands.
All the instructions and installation files can be found on the Android Developers webpage, but for basic commands it is not necessary to download the whole SDK (which requires the JDK as well) to follow installation and the resources download process.
*Important: to use the adb/fastboot commands you have to enable USB Debugging in your phone Settings -> Applications -> Development menu*
To have working adb and fastboot system wide for basic commands just follow the steps below:
To get the HTC USB Drivers download and install HTC Sync (If you do not need the Sync application itself you can uninstall it but the drivers will remain on your system).
*According to post #5 in this thread in some cases may be necessary to temporary disable your antivirus software during the installation of HTC Sync. Thanks @mimirom*
Download the zip archive (Mirror @MediaFire) or the attached file below
Extract the archive on your C: drive. You will have C:\android-tools folder
Adding to the System Path globally to use the command without browsing to the containing folder
Method 1 (via GUI):
Go to My Computer icon -> right click and select Properties.
On the left side of the opened screen select Advanced system settings.
(Or Start -> Search -> type sysdm.cpl -> Enter, browse to the Advanced tab)
Look down on the opened menu and select Environment Variables.
In the lower half are listed the System Variables.
Scroll to find "Path" variable, select it and click Edit...
On the Edit window in the Variable value field go to the end of the line (do not delete it!) and add without any intervals (spaces):
Code:
;C:\android-tools
do not forget the semicolon symbol (;)!
Click Ok 3 times.
Method 2 (via Command prompt):
Go to Start and in the Search box type cmd, right click and Run as Administrator
Type
Code:
setx path /m "%PATH%;C:\android-tools"
and hit Enter. Close the cmd window
Method 3:
To check is it working properly open Command Prompt (Start -> Search -> type cmd -> Enter) and type adb
If everything is configured properly this should list you the Android Debug Bridge version and the available commands.
*HINT*: To use adb or fastboot with files in the Command prompt you have to navigate to the folder containing the file first (using the cd command) e.g. "D:\Downloads\Android" and then to execute the command.
Example:
Start -> type cmd in the Search box, then Enter. You will see
C:\Users\with blinking cursor
If your file is on another drive like the example type "d:" (without the quotes), or other drive letter to go to the relevant drive. Skip this if the file is on C: drive. Then type:
cd D:\Downloads\Android to go to the "D:\Downloads\Android" folder. If your path contains spaces (intervals) type it in quotes.
The command "cd.." brings you one folder back
Click to expand...
Click to collapse
Nice work mate

Thanks a lot for the guide, dude!
By the way, I noticed that it doesn't work for me (windows 7 professional) unless i end the path of adb with "\", for example: ;C:\android-tools\ and not ;C:\android-tools as in your guide.
Hope it helps!

jamsh said:
Instructions for Linux users???
Click to expand...
Click to collapse
OP edited - there is a link to a guide for Linux users
fonpacific said:
Thanks a lot for the guide, dude!
By the way, I noticed that it doesn't work for me (windows 7 professional) unless i end the path of adb with "\", for example: ;C:\android-tools\ and not ;C:\android-tools as in your guide.
Hope it helps!
Click to expand...
Click to collapse
Thank you for the remark, I hope it will help the users with the same problem

Hey Guys, I need help!
after an installation of adb all I get is error:device not found
i entered a code adb shell and hit enter, than i entered
dmesg | grep mmc0, since you cannot put two lines of code at once (I'm a rookie)..
where did I put it wrong?
I can get to recovery of my device, but I get error like:
/I]E:Can't open /cache/recovery/command
I made revolutionary S-OFF..
Thanx for a help!
Rocks

You have to enable USB debugging in the settings.
And while in recovery it should work too
Sent from my HTC Desire S

[Q] Having trouble installing adb for Windows

Problem getting adb installed.
Installed the JDK.
Installed the Android SDK, revision 15.
Now I am stuck, not sure how to install ADB, don't know if it's done from within the SDK manager.
I've got a Rogers i727R. It's running 2.3.5. It's the stock ROM, rooted. I was figuring that I would have to tick the checkbox in Android SDK Manager for 2.3.5 and download those components, and that would give me everything I need.
But there is no 2.3.5. There is 2.2, and 2.3.3, and of course Android 4.
I do have drivers for my phone installed through Kies if that matters. Any pointers in the right direction would be appriciated.
Harry

Thanks goes to Silver<<<<<<
1- Like always enable your Debugging. you can enable that by going to your Settings -> Application -> Development
2- Install the android SDK . you can download it Android SDK
3- Extract the SDK to any folder, Example : C:\Android
4- Make sure you have the drivers installed- In that way your OS can talk to your phone!
now that everything is installed we can go ahead and perform a command :
1. Open the 'run' dialog by pressing the 'Windows' + 'r' buttons on your keyboard (minimize the browser & other non-windows programs) 2. cmd (this will open a DOS prompt) 3. cd c:\Android\tools (go to the directory where you extracted the SDK) 4. adb shell 5. Now you'll see just a '$' 6. logcat
You can now just press the power button on your phone to see what happens. It displays everything the device is doing.
So the thing is: leave your device connected for a while and see what is actually going on when you're not using it. Boom
__________________

OP,
Just install the 'Tools' listed there in the sdk downloader. you dont need to worry about anything else

It seems to also want me to install the Google USB Driver package. Any reason to do that?

harry_fine said:
It seems to also want me to install the Google USB Driver package. Any reason to do that?
Click to expand...
Click to collapse
just do it, it wont affect anything negatively

By the way, it worked great. I can now talk to my phone using the emulator on my PC. I see the list of adb commands, lots of stuff. Seems I can even install apk files, run a remove shell. Very cool.

Lol good luck

How do i root with adb?

Hello, i just got my new samsung 7 plus with honeycome 3.2 and im loving it
I want to know what is the step by step instruction to rooting my device using adb?
the root.zip i found on here dont work for me. when i save the file to /sdcard and n reboot n go into wher i applie the zip from sdcard it shows no files at all on my card. i bought the 16gb version of this tab so i dont have the externel sdcard. i thought that i read one the forum you can only use the externel card not the interel. i believe they added the folder /sdcard to the internel drive and thats why it not viewing.

The rooting instructions say to put it on an "external" sdcard for a reason as recovery will not recognize the internal storage. Do you have adb installed on your computer and at least know how to use it? If not it is going to be way easier for you to just go and spend the $10 for an 8 GB sdcard and install it that way.
I can at least get you part way, installing the sdk and jdk. Here are the instructions for installing the android sdk (adb) direct from google. You also need the java jdk installed on your commputer and google has a link in their instructions.
http://developer.android.com/sdk/installing.html
You first need the proper usb drivers installed and not exactly sure on how to do that. I already had the android usb drivers installed on my computer for my phone and I just let the compter install whatever else it needed the first time I connected my tab to it.
You will need usb debugging turned in your settings and then power the tab off. You would then plug the usb cable into the tab and computer then boot it into recovery. Once into recovery Mount/System. You then run adb in a command window and change the drive to the platform-tools directory where adb resides. It would look something like this in a command window (c:\android-sdk-windows\ is how I set my computer up yours may be different):
cd c:\android-sdk-windows\platform-tools
To check and see if your device is recognized by adb run the command:
adb devices
If nothing is listed then adb isn't recognizing the device and you would need to troubleshoot your installation or boot method.
As far as installing the root.zip file I'm not sure as I've never had to do that before as I've always had an external sdcard on my devices. Maybe someone else can take you thru the last step. I believe all you would do is push the file inside the zip folder over to the tab. The su file inside the root.zip folder needs to be in the same directory as adb, platform-tools directory.
adb push su /system/bin
I'm not sure if you need to change permissions on this file or not and that is done thru a chmod command in adb shell but not sure of the proper code to use for the GTab to do this. For my phone setting permissions looks like this:
adb shell
cd /system/bin
chmod 0644 Su
exit
Do not use this chmod as I'm not sure it will work on the GTab or what it will do to it, it just an example.

In summary these are the basic steps you are trying to accomplish:
1. Install Java JDK
2. Install Android SDK
3. Install USB drivers
4. Turn USB debugging on in Tabs settings
5. Boot Tab into recovery while connected to PC
6. Mount/System in recovery
7. ADB push su file to system/bin
8. Set permissions of su???
9. Exit adb
10. Reboot phone and install superuser and busy box from market

Thanks im rooted now. I took the sdcard out of my droidx & it works on my galaxy tab & i used the root.zip file.
Sent from my GT-P6210 using Tapatalk

ronlsjr said:
Thanks im rooted now. I took the sdcard out of my droidx & it works on my galaxy tab & i used the root.zip file.
Sent from my GT-P6210 using Tapatalk
Click to expand...
Click to collapse
Yes any sdcard will do and that is the easiest way. Though I think everyone should learn how to use adb anyways as it is useful especially if you get into modding.

Yes i do want to learn how to use adb. My desire is to become a developer.
Sent from my GT-P6210 using Tapatalk

Just follow the link I provided previously to the android developers site and follow the instructions. You will first have to have Java JDK installed and a link to that is provided on the android developers website in the link. Once JDK is installed download and install the SDK. It will only put the basic functions onto your computer and you will have to install the rest through SDK Manager, this can take a while, up to an hour or so depending on what packages you want to install. At the minimum you would want the Android 3.2 API (GTab 7+ uses this) and the Google USB drivers and then any other API's for phones you may have. I myself installed all the API's as my first phone had Donut (Android 1.6).

I know this may be a stupid question but why root? what special features does it give you? I am not sure If I want to or not.

Anyone? I'm just curious if I should flash a ROM on here or not I just don't know why because it works fine now after the SwiftKey x and other little apps
Sent from my SGH-T869 using XDA Premium App

don't get confused by the lingo...
Noah321 said:
Anyone? I'm just curious if I should flash a ROM on here or not I just don't know why because it works fine now after the SwiftKey x and other little apps
Sent from my SGH-T869 using XDA Premium App
Click to expand...
Click to collapse
There's a difference between "flashing a ROM" and "adding root access".
A custom ROM implies someone has taken the stock software infrastructure, altered/tailored/customized it, and packaged it for others to easily use.
"Rooting" a device just simply gives you access to certain folders, permissions, files, etc.
It's like giving yourself Admin Rights to your work computer (assuming you're over 18 and/or working).
It allows you to do things that the manufacture probably didn't want you to do - like delete "bloatware" (unwanted apps).
If helpful, click "Thanks"

[Tool] WhatsApp Key/DB Extractor | CRYPT6-12 | NON-ROOT | UPDATED OCTOBER 2016

** Version 4.7 Updated October 2016 - Supports Android 4.0-7.0 **
SUMMARY:
Allows WhatsApp users to extract their cipher key and databases on non-rooted Android devices.
UPDATE: This tool was last updated on October 12th 2016. and confirmed working on Android 4.0-7.0 using WhatsApp version v2.16.304 (latest available).
IMPORTANT: If you wish to extract media files or WhatsApp databases from Google Drive backups then you need: WhatsApp Google Drive Extractor instead.
TUTORIAL:
BRANCH UPDATES:
v4.0 - Fixed issues with Android API 14-17 (4.0-4.2 Jelly Bean).
v4.1 - Added support for Android API 23 (6.0-6.0.1 Marshmallow).
v4.2 - Added support for specifying adb backup passwords.
v4.3 - Added PowerShell version as optional alternative to bat version.
v4.4 - Changed primary mirror for legacy apk.
v4.5 - Fixed issue pushing cipher key to emulated storage.
v4.6 - Updated primary mirror for legacy apk (again).
v4.7 - Added new sanity checks and support for Android API 24 (7.0 Nougat).
PREREQUISITES:
O/S: Windows Vista, Windows 7, Windows 8, Windows 10, Mac OS X or Linux
Java - If not installed: Download Java
ADB (Android Debug Bridge) Drivers
USB Debugging* must be enabled on the target device. Settings -> Developer Options -> (Debugging) USB debugging
Android device with Android 4.0 or higher. I.E. Ice Cream Sandwich, Jelly Bean, KitKat, Lollipop, Marshmallow or Nougat.
*= If you cannot find Developer Options then please go to: Settings -> About phone/device and tap the Build number multiple times.
INSTRUCTIONS:
Extract WhatsApp-Key-DB-Extractor-master.zip maintaining the directory structure.
Click on WhatsAppKeyDBExtract.bat (Windows) or WhatsAppKeyDBExtract.sh (Mac OS X / Linux).
Connect your device via USB, unlock your screen and wait for Full backup to appear.
Enter your backup password or leave blank (if none set) and tap on Back up my data.
Confirm backup password in your command console and then check the "extracted" folder.
TROUBLESHOOTING:
If you have never used USB Debugging before, you may also need to verify the fingerprint.
If you have set a default backup password in your Android settings, then this MUST be the
backup password that you provide when prompted to backup your data. Else it WILL fail!
Linux and Mac OS X users may need to set the script permissions as executable. Depending on the
adb permissions, you may also need to sudo ./WhatsAppKeyDBExtract.sh from your command console.
If you're having issues with WhatsAppKeyDBExtract.bat then right click WhatsAppKeyDBExtract.ps1
and select Run with PowerShell. You may have to enter "y" at first run for script execution policy.
If you get an error saying "AES encryption not allowed" then you need to update your Oracle Java
Cryptography Extension (JCE) to Unlimited Strength Jurisdiction Policy Files.
DOWNLOAD: WhatsApp-Key-DB-Extractor-master.zip
AUTHOR: TripCode
THANKS: dragomerlin for Android Backup Extractor and Abinash Bishoyi for being cool.

alternatives
Yes, this is a normal backup method. There are automatic tools that do the same without using PC, just on device side.
Apart from normal ADB method, you could use ECLIPSE for that, using the memory module, you could transfer files from and in.
If you have physical access to the device, there are many solutions.
regards.

droopyar said:
Yes, this is a normal backup method. There are automatic tools that do the same without using PC, just on device side.
Apart from normal ADB method, you could use ECLIPSE for that, using the memory module, you could transfer files from and in.
If you have physical access to the device, there are many solutions.
regards.
Click to expand...
Click to collapse
The only way to access private application files (such as a WhatsApp's cipher key) without root is the ADB method. You can backup some files on the device without a PC (APK's etc...), but there is currently no way to access private files and folders. All the "My Big Fat Backup" style apps and tools will either require root or ADB. Eclipse also utilizes ADB. Basically, device side backups of application data require root. There are no other alternatives to this. If there was, then Android would be too infeasible and insecure as a viable operating system. Physical access translates into only two solutions. 1.) The ability to root and 2.) The ability to utilize ADB (Eclipse, Bats, Exe's doing nothing more than calling a simple command line). Of course if you are aware of a 3rd method (disregarding the user interface) and is not based on root or ADB then please feel free to share.

Thanks for this tool!
I've just tried to use it, but it installs the java constantly (while java is properly installed on computer as other applications uses it without any problem )
By any chance, do you have any idea how to pass that?
Thanks!!
Mia
PS I got JDK installed and still not working

MiaNet said:
I've just tried to use it, but it installs the java constantly (while java is properly installed on computer as other applications uses it without any problem )
By any chance, do you have any idea how to pass that?
Click to expand...
Click to collapse
The bat file automatically checks for the presence of java.exe on your system. If it's not found then it starts the install. It would appear that for some reason it's not finding Java and hence why you're stuck in this loop. Please find attached a bat file without the Java check. Just put it in the same folder as the original and run this one instead. Let me know how you get on. Java also needs to be callable from the command line. To check this is working you should click on Run... within Windows, type cmd, click OK and type "java -version" (without quotes) and press Enter. This will confirm java is in the command path and print out your JRE build number. I have also updated the release in the OP and removed the Java check, as I have had a couple of similar reports of the loop issue.
Thanks again.

still showing this message attached
TripCode said:
The bat file automatically checks for the presence of java.exe on your system. If it's not found then it starts the install. It would appear that for some reason it's not finding Java and hence why you're stuck in this loop. Please find attached a bat file without the Java check. Just put it in the same folder as the original and run this one instead. Let me know how you get on. Java also needs to be callable from the command line. To check this is working you should click on Run... within Windows, type cmd, click OK and type "java -version" (without quotes) and press Enter. This will confirm java is in the command path and print out your JRE build number. I have also updated the release in the OP and removed the Java check, as I have had a couple of similar reports of the loop issue.
Thanks again.
Click to expand...
Click to collapse
Still showing the attached message

mesho_alaa said:
Still showing the attached message
Click to expand...
Click to collapse
This sounds to me like you need to update your PATH Environment variable with the directory in which java is installed.
Open up a DOS window and type: "where java" (without quotes) to determine possible locations.
If it's located in: "C:\Windows\System32" then the following code should suffice:
Code:
set PATH=%PATH%;C:\Windows\System32
If it's located in: "C:\Program Files\Java\jre7\bin" then:
Code:
set PATH=%PATH%;C:\Program Files\Java\jre7\bin
The above needs to be added to the bat script BEFORE Java is called. You can edit the bat script by opening it with Notepad.
Alternatively, you could permanently update the PATH Environment (probably a better method).
To do this you would: Right click on "Computer" or "My Computer", within Windows Explorer, choose "Properties", click on the "Advanced system settings" and/or the "Advanced" tab, then click on the "Environment Variables" button. Select the "PATH" line, click the "Edit" button, and add the relevant directory to the end of any text that exists for PATH, prefixing the java path with a ";" (semicolon) if this line already contains other string paths. If PATH does not exist then you will need to add it. Sorry this paragraph is a little double-dutch (trying to cater for multiple versions of Windows).

Many thanks! I'll test when home and let you know.
Just to let know, the path command do not fix the prior version with Java check as I first thought this might be the problem.
Thanks!
Mia

Could even be use with ADB from phone to phone? without using the pc? Or I must install the app on the phone and do it offline?

I have find my way! Re-installed Java, manually clicked on java.exe stored in Java folder in Program files (or Program files (x86) ) I've clicked on Javacpl as well and enabled all options, not sure if this is necessary though.
I've then rerun the program without Java check (the Java check one is bugging now) and was able to do the back up.
Thanks!!
Best regards,
Melanie

Cannot tap button
Hi! i've done all the previous steps, but when i unlock the phone, to confirm the backup, i cant tap on "back up my data", it doesnt even grey at hover, just like the button wasn't there...
I can choose not to backup, that button works perfectly, and write the password too, i've tried all the screen, but nothing happends, so i can't backup the phone...
Does anyone think how to solve that? Thanks!

Permission denied
Hi, I followed all instructions and I generated this error.
I would appreciate your help.

Error
mesho_alaa said:
Still showing the attached message
Click to expand...
Click to collapse
I, too am showing the same error.

Curwens said:
Hi! i've done all the previous steps, but when i unlock the phone, to confirm the backup, i cant tap on "back up my data", it doesnt even grey at hover, just like the button wasn't there...
I can choose not to backup, that button works perfectly, and write the password too, i've tried all the screen, but nothing happends, so i can't backup the phone...
Does anyone think how to solve that? Thanks!
Click to expand...
Click to collapse
Try rebooting the device and trying again. If it is still greyed out, the backup feature maybe disabled on the device. Some manufacturers / service providers have specifically disabled usb backups.
kharloz_jc said:
Hi, I followed all instructions and I generated this error.
I would appreciate your help.
Click to expand...
Click to collapse
cardinalaa said:
I, too am showing the same error.
Click to expand...
Click to collapse
It would appear that the key was extracted, but the "copy" wasn't pushed to the sdcard. KitKat? You don't need a copy of the key on your sdcard unless you want to use a supported app. As the key was extracted successfully, you could attempt to copy it by other means.

TripCode said:
This sounds to me like you need to update your PATH Environment variable with the directory in which java is installed.
Open up a DOS window and type: "where java" (without quotes) to determine possible locations.
If it's located in: "C:\Windows\System32" then the following code should suffice:
Code:
set PATH=%PATH%;C:\Windows\System32
If it's located in: "C:\Program Files\Java\jre7\bin" then:
Code:
set PATH=%PATH%;C:\Program Files\Java\jre7\bin
The above needs to be added to the bat script BEFORE Java is called. You can edit the bat script by opening it with Notepad.
Alternatively, you could permanently update the PATH Environment (probably a better method).
To do this you would: Right click on "Computer" or "My Computer", within Windows Explorer, choose "Properties", click on the "Advanced system settings" and/or the "Advanced" tab, then click on the "Environment Variables" button. Select the "PATH" line, click the "Edit" button, and add the relevant directory to the end of any text that exists for PATH, prefixing the java path with a ";" (semicolon) if this line already contains other string paths. If PATH does not exist then you will need to add it. Sorry this paragraph is a little double-dutch (trying to cater for multiple versions of Windows).
Click to expand...
Click to collapse
Hi, I am receiving the "Cannot find the path specified" error. I have tried both changing the script and also the other method, in environment variables. I am curious if this has anything to do with the fact that its an ATT phone (since no one can even root it yet)? No other apps can access my phone, either. I have USB debugging enabled and all prerequisite programs installed. Tried on 2 computers, win7 and win 8.1
I wonder if i it is an error on my part..?

TripCode said:
Try rebooting the device and trying again. If it is still greyed out, the backup feature maybe disabled on the device. Some manufacturers / service providers have specifically disabled usb backups.
It would appear that the key was extracted, but the "copy" wasn't pushed to the sdcard. KitKat? You don't need a copy of the key on your sdcard unless you want to use a supported app. As the key was extracted successfully, you could attempt to copy it by other means.
Click to expand...
Click to collapse
I have reviewed the "Extract" folder and there was the key. I have managed to decrypt it.
Thanks for the help and the tool!
PD: sorry for my bad English, I use translator is haha.

Nothing happens
Hi, first, thanks for this iniciative. A lot of people would apreciate this
I think I did everything as u said, but when I open the WhatsAppKeyExtract,bat and then conect my phone in debuggin mode to PC, nothing happens. Ive waited for 10 minutes and.. nothing happens. Keep showing the initial message: "Please connect your Android device..." and in my phone nothing happens too. Just show a messagem at the upper tab saying: "USB debbugin conected".
Theres any kind of setting to do futher in the debbug options?
Thanks
Update: I had do install de universal adb driver for my phone, and now it starts the download, but now im having problem with java... the messagem says "'java' isnt a recognizable command". I tried all solutions in this post and nothing.. I need heeeelp!

Solution to path problem
Is working perfect. For someone else that can happen the same thing as me. I have to fix something (i am spanish) about:
java is not recognized as an internal or external command, operable program or batch file
Here is the solution:
java .com/en/download/help/path.xml
Or here:
1. Right-Click My Computer and select Properties
2. Then Click The Advanced Tab
3. Then Click Environment Variables
4. Select Path In The Bottom Box and Click Edit
5. Find Where You installed Java (E.g "C:\Program Files\Java\bin)
Its different on each computer
6. Make Sure to add a semicolon after the word bin in the path to seperate it from the other important paths
7. If this doesnt work then you may have to reinstall Java and Try Again
Setting Path on Windows
For Windows XP:
1. Start -> Control Panel -> System -> Advanced
2. Click on Environment Variables, under System Variables, find PATH, and click on it.
3. In the Edit windows, modify PATH by adding the location of the class to the value for PATH. If you do not have the item PATH, you may select to add a new variable and add PATH as the name and the location of the class as the value.
4. Close the window.
5. Reopen Command prompt window, and run your java code.

https://www.dropbox.com/s/nm1goi6m0oob15u/Screenshot 2014-06-15 22.25.27.png
I am getting this error.
using java run time 7 update 60
any ideas?
Thanks!

tzuyang said:
https://www.dropbox.com/s/nm1goi6m0oob15u/Screenshot 2014-06-15 22.25.27.png
I am getting this error.
using java run time 7 update 60
any ideas?
Thanks!
Click to expand...
Click to collapse
Have seen this error before (not related to bat file). You may need to revert to an earlier Java version.