[Q] jade crashing after installing radio v - General Questions and Answers

Hi,
I don't know if it's the right place to post this problem, but anyway.
I've installed this radio 0.41.30.12 a few days ago and since then I'm having huge problems with the jade, it crashes and restarts, the battery drecreases about a 50% in a day. I reinstalled the old radio (0.27.30.09), but my problems are the same despite of the hard resets.
The rom I'm using is the 2.33.721.32 pdaviet and the hard spl is the 2.32 olinex v.5, perhaps this is the problem or a corrupted file of the radio I have.
Any help will be very useful.
Many thanks guys.

Related

help my ppc6700 dispaly no radio

help
after upgrade error , pown on the ppc6700 dispaly no radio , how to fix it
You can try to hardreset it reinstall the original software or a different rom.
You can also search the forum there is a lot of info and other people that have had the same issue and some of them have fixed it.
If none of that works you killed it... Sorry.

audio fault on connection with call - polaris

i need to soft reset my phone atleast 3 times a day, depending on how many calls i get. it rings, i answer, i cant hear anything and the other party cant hear me, only way i resolve this is with a soft reset. it did this on the original rom i got with the phone, then i u pgraded to latest original rom, still the same..
now im on udK Syrius R4 - Blackstone Build 20757.1.4.0 - WWE ( must admit i love this rom ) but still the same problem, i have updated to latest radio version too, now im stuck pulling my last 2 strands of hair out with this, any help be much apresicated. thx
on o2 network in uk
I used to experience trouble like this with some custom roms and finally flashed this rom and this radio, and now eveything is back to normal
yer, the problem comes from having a mismatched radio rom and operating system.
I used to have the same problem till I reflashed to the correct radio rom.

WM6.$ freezing randomly

Hello,
I am experiencing random freezes with almost any WM6.$ ROM i flash it with.
My current setup is:
HardSPL 3.56
Radio Version: 1.65.21.18
ROM Version: Anryl 21500 rev6
I have also tried Medkid's versions, 1.33, 1.62, 1.62F
Ill give wjtk's version a try today see how this goes.
The problem is, that it will freeze on stupid times, while its a clean installation. e.g. yesterday Medkid's 1.62F froze up on me when i tried to change the time. Then it needed a soft reset through the button, it froze on the boot screen (the one that shows the radio version etc etc) had to soft reset again through the button and i somehow hard reset it that way...
Any ideas?
(Im pretty sure i have CID unlocked it, is there any way to check it?)
Thanks in advance,
Andrew
dumraden said:
Hello,
I am experiencing random freezes with almost any WM6.$ ROM i flash it with.
My current setup is:
HardSPL 3.56
Radio Version: 1.65.21.18
ROM Version: Anryl 21500 rev6
I have also tried Medkid's versions, 1.33, 1.62, 1.62F
Ill give wjtk's version a try today see how this goes.
The problem is, that it will freeze on stupid times, while its a clean installation. e.g. yesterday Medkid's 1.62F froze up on me when i tried to change the time. Then it needed a soft reset through the button, it froze on the boot screen (the one that shows the radio version etc etc) had to soft reset again through the button and i somehow hard reset it that way...
Any ideas?
(Im pretty sure i have CID unlocked it, is there any way to check it?)
Thanks in advance,
Andrew
Click to expand...
Click to collapse
This subject has been covered many many times, there really was no need to start yet another thread on it.
Try flashing cmonex's 3.29hard s Spl., it is a patched spl for random freezes.
http://rapidshare.com/files/191032042/Cmonex_s_HardSPL3.29_SD.zip
6.5 is still in development so it can't be error free no matter you change the radio's, SPL's. But our master chefs are really working hard to outperform MS guyz.
denco7 said:
This subject has been covered many many times, there really was no need to start yet another thread on it.
Try flashing cmonex's 3.29hard s Spl., it is a patched spl for random freezes.
http://rapidshare.com/files/191032042/Cmonex_s_HardSPL3.29_SD.zip
Click to expand...
Click to collapse
sakshamkatyal said:
6.5 is still in development so it can't be error free no matter you change the radio's, SPL's. But our master chefs are really working hard to outperform MS guyz.
Click to expand...
Click to collapse
Well said guys.. closing thread as answers are out there without a new thread

Fuze freezes after soft reset - couple days after flash?

My fuze is freezing after a soft reset, and the only solution I have found is to hard reset.
I recently flashed hard-spl and my first cooked ROM. A few days later this happened. It freezes just after the animation sequence. I hard reset the phone, set it all up again, couple days later - frozen again. Tried a different ROM, loaded fine, set it all up, couple days later - frozen. Tried a 3rd ROM, same thing.
I was running the stock at&t fuze ROM up until this with no issues. I have tried 2 different versions of the Energy ROM 2.0 and once with Shep's 6.5 ROM.
I'm getting pretty sick of setting this thing up. Any ideas, maybe a bad hard-spl flash?
I had the same problem before, i fixed it with flashing back stock rom, reflash hard-spl and trying a diffrent build of my favorite rom, and to be honest i have no idea what fixed it.
Ok thanks for the reply. I am going to try a reflash of the hard spl, and a new ROM. Something makes me think the hard spl is the problem, but a new ROM can't hurt at this point. I will post my results...... in a few days. Thanks again!
Having almost the same problem. Where exactly was it stopping?
I get the first splash-screen, afterward in the lower right corner the 3 red version numbers appear and nothing happens, i dont get to the second (animated) splashscreen, nor to the windows mobile one.
More info:
Stock Rom
--> flashed HardSPL
--> flashed PdaViet V11
--> months later V15
--> weeks later WM 6.5 Testrom, disappointed --> flashed ProvenRom 3.3
--> trouble began approx. 3 days later
--> reflashed ProvenRom 3.3
--> trouble started again, then i did a hard reset for the first time
i will try reflashing stock rom, then hardspl, than custom rom and report in a couple of days
same thing happened to my htc touch pro. i havent fixed it yet
Happened again. I had reflashed the hard-spl and then a new version of the energyROM. It froze up later that night. Iam getting the first splash, with the red numbers, romversion etc., then the animation plays, the it freezes at the end of it. I guess I will try to flash back to stock ROM and see what happens. Until someone has a fix, I guess it'll be trial and error. I'll keep you posted.
And again, twice.
I thought everything was fine, workin good for a couple of days, then it froze again. Any thoughts or further suggestions would be highly appreciated.
Seems like it happens while I am setting things up, phone starts to get laggy after a soft reset, after adding a cab that requires a soft reset. Then it freezes on the next reset.
Software Version
I think we should narrow this down by comparing the software versions.
I'll start:
Radio: 1.14.25.05
Rom: Proven 3.2, 5.07.831.17 build 5.2.21042.1.6.1
HardSPL by Olinex
now you go!
addition:
i also remember, this happened after a cab-install. Do you remember WHAT you actually tried to install? I think for me it was HomeScreenPlusPlus UI. Afterwards it was always Opera that stopped responding and i had to soft-reset --> total failure
I had the exact same problem...you can see it in the DaG 6.5 Kitchen thread. I tried flashing to a known custom Rom that I know worked and it still had the same issue. I fixed it with the advice of someone there, the same advice that's here. Flash a stock rom, hard reset....then flash a custom rom. I don't know why that fixed it but it did.
Hmmm, maybe this will work. I had tried that and it did seem to work. However, after a few days I got sick of the 6.5 and flashed back to the energyROM. So I will give this fix another shot.
In regards to the previous post here's what I am running:
radio: 1.12.25.19
Rom: EnergyROM 2.0 build 41609
Hard SPL - SPL-1.90.by Olinex
Its almost becoming funny now. I did a soft reset so I could see the radio version and guess what - it froze again.
It seems like if I don't set everything up, it will last a few days, but sooner or later I get fed up with not having progs installed etc. and after I set it up - poof!
So here is a list of cabs and general things i do to setup the phone.
Hard reset - reset at screen setup - ROM intitial setup - device reboots itself-
-PPCPIMBackup (installed on ROM, just restore contacts)
-ChangeScreen or Gyrator / have tried both individually, not at the same time
-DredSensor
-KforTouchPro
-HTCWeathermaster Rhodium
-Gscroll 2.0 (beta)
maybe something else I haven't installed every time
of course, set owner name, setup e-mail, the rhodium world clock bug setup, general tf3d setup (contacts, weather, tabs etc.)
Add shortcuts from my sd card for previously installed progs.
I'm not sure that any of these are the issue. I have done this at least ten times. Each time I have noticed which was the last cab installed then freeze, I try not to install that cab, then it will still freeze, eventually.
I am going to reflash the stock ROM and stock SPL, then hard SPL and a ROM flash. I'll be sure to post my results.
i tried latest mystic 6.5 rom lite beta 1.1 and it froze within a day at the second splash screen and after about 1-2 min the screen turned white. I have tried the battery removing trick, but same results. I'm not sure what apps i have installed after hard reset...
i tried latest romeos rom 6.1 randium edition: it got frozen after some time...
same with both NRGZ roms: 1 and 2 version (standard raphael manila and rhodium manila).
Now i'm using romeos wm6.5 rom 2.101... will post if it freezes...
i havent tried this: "reflash the stock ROM and stock SPL, then hard SPL and a ROM flash" yet...
at10ti0n said:
Now i'm using romeos wm6.5 rom 2.101... will post if it freezes...
i havent tried this: "reflash the stock ROM and stock SPL, then hard SPL and a ROM flash" yet...
Click to expand...
Click to collapse
I had no luck with this solution, and it is not exactly what was described.
Actually the solution posted is to just flash stock rom, hard reset, then flash custom rom.
I tried the above solution and it still froze, now I am going to try the correct solution posted and see what happens.
Frozen again... I am going to flash back to stock rom, stock spl, see if it still freezes.
This works (for me)
Running fine for a week:
- Flashed stock ROM (O2 German). This replaces the radio and the OS
- Went back to stock SPL. THIS IS TRICKY, SO READ(!):
+ Olinex HardSPL will NOT let you flash back to your StockSPL, because it is write-protected. This kept me up quite some time.
+ Flash your Stock ROM
+ Then, flash the hacked 195 SPL mentioned HERE: http://forum.xda-developers.com/showthread.php?t=502720
+ then, flash your Stock SPL. Read the Threads: http://forum.xda-developers.com/showthread.php?t=410150
+ Make sure, your SPL is neither Olinex, nor the hacked 195 in the third picture
+ I flashed the Stock ROM again just to be sure the stock SPL runs and allows your stock ROM to run.
- Flashed HardSPL
- Flashed Energy ROM 2.0 WITHOUT Manila, flashed latest Radio, installed cabbed Rilphone.dll
Installed Resco, Resco Today, MortPlayer - this is the SAME setup that got me caught the last time and now runs fine for a week.
This works for me. I presume some ppl get the stock SPL flashing wrong.
As i can read from other roms, it happens ONLY to Roms with the new rhodium manila,
so maybe, if you're tired of reflashing and hard reset, try one without the new manila interface.
Another suggestion: I have a different Opera now. Many describe they tried to start Opera, THEN it hangs and the phone gets stuck on bootscreen. I have 9.5 Build 15613 now and this one runs fine.
I encourage you to try energy ROM 2.0 without Manila. There seems to be a battery issue and someone uploaded a version with better battery life, you may try this, but i don't find the post anymore and this may have rhodium manila included. Energy ROM 3.0 is out now netherless, maybe someone can follow my instructions and try this with 3.0.
Hope i could help, this was bugging me SO LONG
Wow, thanks!
I have been running the stock at&t rom since my last post with no freezing. I will try this step for step, and I will try energyrom 3.0 just to let you know.
Wish me luck!
Well, I was able to get the stock SPL back, just as you described. Thanks again for the info.
However, I flashed EnergyROM3.0 and it froze after a few hours. Of course that rom has the rhodium manila cooked in, so I am going to try again with another rom. I will report back later.
from my last post i have been using romeos wm6.5 v2.101 with no freezing.. it has NO manila cooked in.
I think, maybe it has something to do with manila :-?
Same problems here as described. Using:
1.14.25.05 Radio
EnergyROM 3.0 WM6.5 50409a version
Started after flashing the WM6.5, reproduced easily after 1-2 hr of ROM on phone, it freezes (either by installing something, or Manila general use) then stays on information screen of versions.
Going to try stock ROM + reflash SPL then flash EnergyROM 3.0 again. If that wont work, i go back to 2.0 which worked well.
OK guys I am going to report this issue has been fixed (though not solved) for me.
I flashed ROMeOS wm6.5 v2101 and am also running the version of opera previously posted. I have been running for almost a week with no freezing, and (knock on wood) do not expect it to.
I am very happy with this rom and don't plan on flashing again for a while. However, if I do I will report any success/failure. I am curious to know if the problem is just certain roms, or something specific in them. If anyone else having these issues would care to post their results with other roms, it would be appreciated for the sake of the community.
I also wanted to note that I flashed the RRE wm6.5 non-manila version just before this and it did freeze on me. So it may not be related to the rhodium manila.
Anyways thanks again to all who posted and helped with this. I can't tell you how happy I am to have stable phone again!
Good luck and happy flashing!
same thing happened to my htc touch pro. i havent fixed it yet

Keep returning to blankscreen...

Hello all,
I have 2 HTC Universal's both branded Qtek 9000. somehow both devices keep ending up with the blank screen. when trying to reflash any rom at 99% it stops with error 112. the only thing i can do then is with MTTY (task 28 55aa). After i've done that i must flash the three rom files.
Now since i have it with both devices i know it's not in the devices, although i asume that. Both are G4 with Bootloader v2.01 and radio 1.18. I can't tell when exactly it happens. first i thought it happend by installing a certain app. But that is not the case. I think it has something to do with rebooting a rom several times. Or after i've used the wlan. Maybe it can have something to do after inserting new memory or sim card.
The first time i got this behavior happened when the devices where not supercid (stupid me). So i first thought that was the reason... not... After supercid same problem.
I also updated the radio, wich firstly was 1.09 and now upgraded to 1.18. That also did'nt help.
The problem does not occur when running the default WM5 rom. The only idea i have now is to try other roms, but before spending many many hours again on nothing is a bit frustrating. I have been working on this problem this last week for over 20 hours with many sleepless nights...
I bought both devices recently from different owners they both never did a rom update and the devices where both not supercid.
Any advice or information is very much welcome.
Thanks in advance,
Michiel
What Rom are you running?
Are you overclocking? (This can cause whitescreening on some devices too)
More details on what exactly you are running and installing and details on exactly when then the whitescreen happens............
Cheers,
Beasty

Categories

Resources