i just bought my tilt, just flashed to dutty v3 room and now i get a weird text every 4 mins. the number is 111145643 and it says wvi1 1.1 1111. is there anyway i can stop that text?
thanks!
Hmm I think you should call your carrier. Unless your phone is somehow sending itself a message, the kaiser probably isn't the culprit.
did you have express mail setup? if so you have to reinstall it on the phone then log onto the express mail server and delete the connection that you made for push e-mail or turn off push, then uninstall express mail on the phone and reset. you should be OK
^^I stand corrected!
I think that is for the IM+ program that ATT provides on their roms for im. The company is called wireless village i believe. I was bugged by it for a while, well the full hour I had my device before I flashed schaps!
I use Palringo until trillian gets a clue about wireless devices. It can sync with AIM, Yahoo, MSN, Gtalk, and others.
BTW, It uses data instead of sms to send messages like the IM+ does.
i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.
gimini said:
i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.
Click to expand...
Click to collapse
its not necessarily a side affect of flashing, it can go away if you reinstall the app that was on the old rom that is causing it... its something that was installed on your previous rom that used silent sms to alert the program to perform a specific function. LIke PTT, expressmail, or the cing/att IM client (to tired to remember the name)... When these programs are running your phone will recieve a ghost message that is only read by the app to wake it up. Alot of these problems were seen in the hermes thread and PTT.
Nope....That is what you get when someone tries to PTT you. Without PTT you get an SMS message. The way PTT works is basically Voice MMS messaging with a trigger to open & close the voice connection (PTT Button) Those digits you see are altered SMS addresses, they are altered so that PTT can recognize them & shift it from SMS to PTT.
Agin, whenever you kill PTT, you lose the ability to decipher the modified address & hence, it's received as a MMS instead. The reason you keep getting it is because the request that was sent retries a certain number of times before failing.
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Well, that would make Dutty's never ending post even longer. We should save that post for other problems directly regarding the rom, and comments on new updates.
Beside, I believe the problem has nothing to do with Dutty's V3, it work flawlessly for me.
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Wow man take a breath! Your gonna get an ulcer.
to his defense i havn't seen this question in dutty's thread at all. and i've only seen it once but not onthe kairser forums. so cut him a lil slack. plus we all learn something from it...ptt or express mail can cause this. thats sure something i didnt know. hope all is well now...enjoy your device sir.
This question was answered on the hermes forum. That is how I solved my issue. I still believe it deals with the IM app from att that uses wireless village. Ill try to find some links to help get it solved.
I couldnt find the thread in the hermes section that described the issue. It might be from OZ messanger and not IM+. It is the version that comes preinstalled from the ATT rom. It is designed to use sms to im therefore making ATT more money.
I had the same text messages when I first got the Kaiser and ran the im software. I believe my test message had a different set of numbers at the end.
Here is a link to Wireless Village. They are a group that is promoting interoperability between handsets for a variety of functions (IM included).
http://www.openmobilealliance.org/tech/affiliates/wv/wvindex.html
EDIT:
I found this article from the cingular...er...ATT forums. This is the issue I originally had and the same text from the same number. The issue below is because OZ messenger was closed and not properly exited.
http://forums.cingular.com/cng/board/message?board.id=samsung&message.id=16362
I spent all day yesterday figuring this out. I downloaded and install the .cab file to my storage card and then logged into the IM program (OZ). After signing out, it kept me logged into all 3 services (Yahoo, AIM, and MSN) and then I proceeded to receive 40+ text (SMS) messages b/c it was trying to "reach me". After sitting on the phone for about an hour and half with a great Data Service Tech Rep, we figured it out and now the IM program works just fine.
~
I'm getting the message from 1111470400 and all it says is WVCI 1.1 333.
~
LISTEN IT KEEPS TEXTING ME AND IT WONT STOP.
HERE IS THE NUMBER ITS FROM AND WHAT IT SAYS
1111470600
WVCI 1.1 333
Click to expand...
Click to collapse
From the 8525 forum
http://forums.cingular.com/cng/board/message?board.id=samsung&thread.id=33273&view=by_date_ascending&page=1
Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
You know - Generally I don't get into these types of little spit / spat arguments - but today you have caught me at the perfect time.
Martinhdk - you are the type of person that makes dealing with the public so hard. You complain about things that aren't even worth complaining about. Sure - it was Dutty's ROM, but in essence had absolutely nothing to do with the ROM, it's probably the push to talk causing the issue. (Because I have the same issue) You had to try and prove yourself by spouting off and telling someone how to run things, when really, you were in the wrong.
Sometimes people get anxious and maybe don't do as much searching as they possibly should. Big DEAL - you are in a forum and since forums began it has been a problem. Does this require that you lay into the guy and tell him how stupid his question is? NO, it doesn't. You must be one very unhappy individual who probably lives a very lonely life - do us all a favor, in the future; keep your comments to yourself and let the moderators do their job.
I apologize to XDA - I know this thread / forum is not used for this. I just feel that sometimes these guys who insult someone younger / or maybe just not as experienced have a tendency to scare these guys away and I don't feel that is right.
i had the same exprience , its not the problem with your carrier , its the ATT IM+ app , if you exit the app w/o logging out of messenger app you keep getting this wierd msg , i tried unintsallng the app but no luck , finally i relashed a new rom and the error went away.
SOLUTION
What you do is you sign in to AIM at a desktop computer, the screenname you signed in on your phone. than a message will pop up saying you are signed in at two places and if you reply to that window with "1" it will sign you out at the other location, your phone. that should stop the messages.
the AIM service on your phone used txt msgs and when you close the program without first signing out. it usually causes that problem.
Stealth message?
I've heard of this so called "stealth" text message used by the carriers to send commands to the phone. My next question is - is it possible to send one of these so called "Stealth" messages from a phone to anther phone - with the proper instructions encoded in the text msg to automatically appear either on the users screen or in their inbox? I have heard this is possible but am very interested if someone could provide me a little more insight on it....
It's possible, it's been done. Would you like to know how? How do you want to send the malicious code? BT? WIFI? MMS? Maybe I can get you my bank account number & ssn while I'm at it?
There are other forums for that type of stuff, some proggies to do this are actually security auditing tools. Most all means though require the user to acknowledge receipt of whatever you send & then require them to execute it. However, I sincerely doubt that anyone here is going to give you any means to do something that may harm someone's device. Sure, you just want to play a prank, but how about the guy you then teach it to?
I want to be able to send a text to a group of 7 or 8 people. Can I set something up on Windows Mobile 6 so I don't have to keep adding these people separately?
Try this
http://oldsap.blogspot.com/2006/05/group-text-using-vjsms.html
...or this - http://forum.xda-developers.com/showthread.php?t=306682
...or this - http://forum.xda-developers.com/showthread.php?t=307296
Hopefully one of these suggested so far will be just what you were looking for.....failing that, there's always Google
HTH,
Mark.
Has anyone used them? Can anyone recommend one of the others?
AndyCr15 said:
...so I don't have to keep adding these people separately?
Click to expand...
Click to collapse
Dude, start typing names into the "to" field with the keyboard. Auto-complete pops up the names of your contacts so all you have to do is select them.
People make too big of a deal about this issue, IMO...
But if it's 20 or 30 people and your have to start typing them each time, that's still maybe 3 or 4 minute job. Also, you have to fish out your list each time to check who needs them.
Compared to being able to type 'Football' or something instead. Myself, I would say it's quite a decent time/hassle saver...
The first link I posted above should work well for you; it's "category-centric", so if you create a "Football" contact category you can assign the required contacts to that category. When using the GroupSMS program, it will list the categories you have defined and you can then pick one (or more); then you just enter the message you want to send....job done!
Read the threads, try 'em out.....
Mark.
I know this may have been briefly covered before in Dutty's thread, but 300 pages are a bit more than I want to re-read. Also this issue is present in the official HTC 6.1 rom.
When I receive an MMS from someone, it will either start a conversation with their phone number (even though they are a contact), or it will take an existing conversation and convert the name back to the contact's phone number.
I thought I read there was a way to fix this by formatting the phone numbers a certain way in your contact list.
If someone could tell me how to fix this, it would be great. Also a program that changes the format of phone numbers in bulk would be great to, if that's really what I need to do.
Apologies if there is a thread like this somewhere.
I assume everyone going to the 6.1 update will have this issue. I would imagine a sticky would be quite useful for this, unless there isn't some other kind of 6.1 sticky on issues already.
-James
The ones in my addy book in this format +15555555555 show up with the name most of the time. Any other format they just show the number. It seems if i have no other messages from the sender, even formatted like above, they will just show the number. As of yet, I have found no easy way to fix it other than changing all my contacts.
As you have stated that there is a discussion about this in an existing thread you need to do into that thread and use the search function found next to "thread tools".
If you want to extract that info from the thread and either update the wiki or create a new "[SOLVED]" thread with it in the first post the whole community would be grateful.
Please don't create a new thread asking someone else to get the answer when you already know where it is.
Thought I'd post this issue since I've run into it since I got my new G1. Possibly if someone has a well read blog it's worth posting there for Google to index! There must be others who have this problem. Anyway..
I moved all my numbers across via my SIM card. It seems the SIM cropped all the pluses (+) from the front of all numbers with +447... in my contacts. (+44 is UK code).
Now, a +447.. number is valid, and a 07.. number is valid, but a 447.. number is NOT!!
This I did not know. Now I need to fix 100+ numbers in my contacts.
Further to this, and G1 specific:
In Messaging if I send a message to a 07.. number it goes in a new thread. The reply will always (I think) come back with +447.. as the prefix. This means it starts its own new thread! Annoying at best.
I would recommend everyone change their numbers to use the correct +blah.. country prefix.
Also, the Messaging app could be a bit cleverer with parsing number prefixes when it comes to threading up messages . Android dev team reading??
Anyone else had this problem? Any comments?
mafro
I apologize if I break some rule, I posted this in another thread but realized the topic concerned a G1. I am not allowed to post on the development thread due to my just joining.
I'd like to find an app that would block outgoing SMS text messages. I've tried to find one that would do such a thing and have been unsuccessful. I've also thought about creating my own but realized it is way beyond my level of comprehension.
The way I see it the app could run a script that if the particular number was detected would disable the radio for a certain period of time and delete the message before the radio coming back on. it would be password protected to allow control and prevent unauthorized use.
I want to do this because there is a particular number I no longer want to text. I've memorized the number so deleting the contact is not an option. I'm not looking for criticism about my weak constitution. You're not my psychologist. I'm just trying to find a way to resolve this issue before they have to change their number to avoid me.
If there is someone out there working on this I'd really like to find out about their progress. if not then a starting point on how to create this app.