Try this reg key and reboot for 2-way in call recording (thanks to 4pda.ru member RekGRpth):
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"MixModeRecord"=dword:00000001
P.S. CAB in attach. Reboot after install.
korand said:
Try this reg key and reboot for 2-way in call recording (thanks to 4pda.ru member RekGRpth):
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"MixModeRecord"=dword:00000001
P.S. CAB in attach. Reboot after install.
Click to expand...
Click to collapse
thank's for sharing mate...
work well for me
Thanks, I tried many different combination of drivers and finally gave up. Now it is working.
Many thanks,
Bob
work also with ACR Version 1.2.4
cheer's
Unbelievable ! Thank You ?
I'm very exited
Thank you very much korand for the working solution.
I'm very exited
mate.....
Korand have only sharing this tweak
All credits to RekGRpth
korand said:
Try this reg key and reboot for 2-way in call recording (thanks to 4pda.ru member RekGRpth):
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"MixModeRecord"=dword:00000001
P.S. CAB in attach. Reboot after install.
Click to expand...
Click to collapse
Works perfectly on hd2 1.66 ITA rom, many thanks for reporting korand.
korand said:
Try this reg key and reboot for 2-way in call recording (thanks to 4pda.ru member RekGRpth):
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
"MixModeRecord"=dword:00000001
P.S. CAB in attach. Reboot after install.
Click to expand...
Click to collapse
It works perfectly on my HD2. Both voices (in and out) are pure and clear in the ACR 1.2.4 . Thank you for great work.
Amazing !!! Thanks thanks thanks.....:d
Nice work, will test later. Is there any versions of ICR that correctly integrate into the HD2 Dialler (allow to start/stop recording in the dialler menu)?
Update: If you add some reg keys you can enable the record option on the dialler (will post later as on mobile) and it works very well. Just need to find out how to specify the download location .
One thing i would say is don't activte recording till the call has connected as it seems to block the mic for me and reduce recording settings as these sound files eat up the device memory.
For me Plantronics BT Voyager 510 speaker stopped working... I need to check this more...
Great! Works great on my HD2. Big thanks for sharing!!!
xavierdemon said:
Nice work, will test later. Is there any versions of ICR that correctly integrate into the HD2 Dialler (allow to start/stop recording in the dialler menu)?
Update: If you add some reg keys you can enable the record option on the dialler (will post later as on mobile) and it works very well. Just need to find out how to specify the download location .
One thing i would say is don't activte recording till the call has connected as it seems to block the mic for me and reduce recording settings as these sound files eat up the device memory.
Click to expand...
Click to collapse
It's strange.... I use Resco Audio Recorder and sometimes it indeed happens that the mic does not work. The other end cannot hear me when I call them. When they call me, there's no problem.
If this happens, I usually switch to speakerphone (and back) this will reset the mic again.
tks bro，but can it good working in bluetooth？
Thanks, for the first time after months it works both ways. Audio Notes Touch Vito. Sony Ericsson BT HBH-PV-720. ROM 1.66.482.1
xavierdemon said:
Nice work, will test later. Is there any versions of ICR that correctly integrate into the HD2 Dialler (allow to start/stop recording in the dialler menu)?
Update: If you add some reg keys you can enable the record option on the dialler (will post later as on mobile) and it works very well. Just need to find out how to specify the download location .
One thing i would say is don't activte recording till the call has connected as it seems to block the mic for me and reduce recording settings as these sound files eat up the device memory.
Click to expand...
Click to collapse
To integrate ICR in your HD2 Dialer menu :
1- Copy HTCGesture.dll to Windows directory.
2- Install InCallRecording_repacked_monx.cab in device memory.
3- If u dont like the beep sound, copy the tow files ICR_BEEP.wav & ICR_BEEPBEEP.wav to Windows directory.
4- Restart your device.
mourad75 said:
To integrate ICR in your HD2 Dialer menu :
1- Copy HTCGesture.dll to Windows directory.
2- Install InCallRecording_repacked_monx.cab in device memory.
3- If u dont like the beep sound, copy the tow files ICR_BEEP.wav & ICR_BEEPBEEP.wav to Windows directory.
4- Restart your device.
Click to expand...
Click to collapse
It asks for certificate...
Are you could just do this
Neville.Holland said:
Yes I have the HD2 and can confirm that this cab or reg entries do work
HKLM\System\AudioRecording
(DWORD) "Enabled" value=1
HKLM\Software\Microsoft\Voice
(DWORD) "EnableCallRecordMenuItem" value=1
(DWORD)"AllowInCallRecording" value=1
You will have to create the key "AudioRecording" and "Voice" in the necessary folder and add the Dwords.
Or
See Here
Not my work, just helping out
Click to expand...
Click to collapse
If anyone knows how to change the default location of the saved audio file, that would be good.
It Works !!!!!
Thank Youuuuuu
after almost 2 years of just reading, after 6 months from registering, my first post here - i must write it because it is most awaited by me solution ever
man, it works like charm !!!
it works also while using SE MW600 BT headset
Related
I personally dislike voice command, so I looked for a way to bring back voice speed dial in crossbow. It took me a few hours to find the cure so I thought I'd share.
First you need to reinstall voice speed dial itself (cab attached).
That was the easy part to find, but to make it work with the button on your bluetooth headset you also need to do the following changes in the registry:
From HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Windows\VoiceCmd.exe" (string)
To HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Windows\SDDialer.exe" (string)
and
From HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "\Windows\btagext.dll" (string)
To HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "OEMAGW.dll" (string)
That did it for me, voice command is in the rom so you will just have to leave it there (at least in the MB crossbow).
Works Great!
Thanks!!
It works great on my WM6! I really appreciate you sharing it.
Just one issue: I cant hear that beep in my BT headset after which you are supposed to speak. Any workaround for that?
AFAIR my headset beeps just as it did on wm 5.0 but i'll check that tommorow, I have a motorola h700 bt headset btw.
Yep!
It works for me to Thanks man.
sids911 said:
Just one issue: I cant hear that beep in my BT headset after which you are supposed to speak. Any workaround for that?
Click to expand...
Click to collapse
I checked it and the headset beeps in the same moments as it did before, but with a different sound now.
gonna give it a try.
I also dislike voice command. I find it difficult to recognize my contact's names. So i prefer voice tags!
Great post thanx!!!
Saludos a mi amigo Jorge Raig !!
Been looking for this! Super! Thanks a lot!
I have been looking for this.. thanks alot.
im trying to make it work
Right now im trying to make it work on farias latest rom.
I let you know if it works...
Yes It does !!!!!!!!!
Is there a cab out there that make the registry config by itself ??
Best regards
Good Job
I really liked VC on a WM5 ROM, but was starting to hate in on WM6 ROMS...just wasn't working like it was supposed to.
charly_mx said:
Right now im trying to make it work on farias latest rom.
I let you know if it works...
Yes It does !!!!!!!!!
Is there a cab out there that make the registry config by itself ??
Best regards
Click to expand...
Click to collapse
Attached CVSD Ver. 1.2 with backup/restore plugin and registry entries.
Have fun!
jpmche
i hate voice comand too so i try to use voice speed dailer again so thank for the CAB
sids911 said:
Thanks!!
It works great on my WM6! I really appreciate you sharing it.
Just one issue: I cant hear that beep in my BT headset after which you are supposed to speak. Any workaround for that?
Click to expand...
Click to collapse
Mine was doing that too...if you phone vol is on silent ie. silent or vibrate mod then it will not beep for me...sorry it you all ready tried that but that is the problem I have found and if you find a fix for it please let me know.
This thread should be sticky.
Any mod can make this thread sticky ??? Many people (including myself) hate voice command. So, this thread is really usefull if someone prefers Voice Tags instead.
Excellent contribution.
BEst Regards.
mUn'r ROM comes with CVSD v.1.2 included, everybody should try it.
Voice Commander is Microsoft commercial product, available in few languages (American, English, French, German...) and not very usable for users in other languages. It's not part of Windows Mobile 6, and as I don't use it, I made myself a ROM without it
me too , i hate voice comand because when i try to call mike voice comand dial difference name so i do not knoe why
The file doesn't work.
It seems that the file is corrupted! I'v being tring to download through varius computers and connections but when I extract the .rar it gives me the "file corupted" treatment!!
looking?
I think it's great you created this message with a manual howto make Voice Speed Dail work, but I cannot beleive all the reactions with "I was looking for this".
The answer is on this board allready so you weren't LOOKING and most certainly didn't use search
Thanks ! I was also looking for this and found it off google. However, I have a problem.
When I use the bluetooth button to use voice tags, I get an error saying "There are no trained voicetags".
Even if I launch the app seperately , "start -> voice speed dial" I get the same error.
This is on a T-Mobile Dash (excalibur) with the leaked official wm6 rom.
I can't even add a voice tag! Once I get into contacts and pick a contact, under the "menu" menu I don't see any voicetag menu item. There is a speed dial menu items but selecting it doesn't show any voicetag specific options.
Please help ! Voice Command sucks SO bad that I wouldn't use it if someone offered me lunch/dinner money! Voice command cannot recognize most people on my contact list. I agree its a pain to train tags, but better to have few contacts working 100% than all contact working 0%.
"Reduce the users' work, not their level of control"
Any help, anyone ?
siddharths said:
Thanks ! I was also looking for this and found it off google. However, I have a problem.
When I use the bluetooth button to use voice tags, I get an error saying "There are no trained voicetags".
Even if I launch the app seperately , "start -> voice speed dial" I get the same error.
This is on a T-Mobile Dash (excalibur) with the leaked official wm6 rom.
I can't even add a voice tag! Once I get into contacts and pick a contact, under the "menu" menu I don't see any voicetag menu item. There is a speed dial menu items but selecting it doesn't show any voicetag specific options.
Please help ! Voice Command sucks SO bad that I wouldn't use it if someone offered me lunch/dinner money! Voice command cannot recognize most people on my contact list. I agree its a pain to train tags, but better to have few contacts working 100% than all contact working 0%.
"Reduce the users' work, not their level of control"
Click to expand...
Click to collapse
Based on HTC Rafael (Touch Pro)
http://www.pdaviet.net/showthread.php?t=29122
http://rapidshare.com/files/128714027/TouchII_2.20.707.44_WM6.1_B19960.7z
http://www.mediafire.com/?zpzwywdw5xm
passwd : PhamQuang
Thanks for sharing but did you really need to use this linkbucks stuffs? do you get money out of each click?
hi you all. ı want to learn how we upgrade this rom because there ısnt any installation guide pls let me know
willy792003 said:
Based on HTC Rafael (Touch Pro)
http://www.pdaviet.net/showthread.php?t=29122
Click to expand...
Click to collapse
Hi Willy,
I suppose you got the links from the forum and they probably used linkbucks over there "and you just used copy and paste".
For some reason the PDAViet forum is not accesible anymore for guests and you have to sign up to access the forum "and therefore the links".
I used to access their forum even though all I was doing is going through the links and find "elfin" and download the rom "since I don't understand the language"
now it is impossible to do so so thanks again for sharing and I wonder why they want people to sign in to download from a rapidshare link "since they don't have an english part"
K.
hi all
isn't the build number older than the v42 :
19960.1.2.2 for 42
20226.1.3.0 for 44
i've never known how to read build numbers, i can be wrong.. but i do think it already happened btwn v40 and v41
Just flashed to V44 (with 18MB PP), so far so good.
1 thing I noticed, the bottom bar covers a name when in (Contacts) application if you keep pressing 'down'
Not sure if it's because of 18MB PP, or the new ROM. It does seem to be faster than V41 PDAViet.
does it have the same problem of having no smart dial
does it have the same problem of having no smart dial
zxcv said:
does it have the same problem of having no smart dial
Click to expand...
Click to collapse
I created my own cab file, based on smartdial v3b, diamond & black dialer for WWE.
You can get it here
hi
is there a cab with just smartdial? (no black dialer skin)
i never managed to get a prog that could kill an actual process, although i found a hundred that could kill an application, so i can't just kill cprog.exe and add i can't remember which dll to the windows directory
thx all
ptitrusse said:
hi
is there a cab with just smartdial? (no black dialer skin)
i never managed to get a prog that could kill an actual process, although i found a hundred that could kill an application, so i can't just kill cprog.exe and add i can't remember which dll to the windows directory
thx all
Click to expand...
Click to collapse
Try Dotfred's Task Manager (http://www.dotfred.net/TaskMgr.htm). It works for me. If you just want smartdial with no skin, see this thread: http://forum.xda-developers.com/showthread.php?t=394518.
ptitrusse said:
hi
is there a cab with just smartdial? (no black dialer skin)
i never managed to get a prog that could kill an actual process, although i found a hundred that could kill an application, so i can't just kill cprog.exe and add i can't remember which dll to the windows directory
thx all
Click to expand...
Click to collapse
I used Resco Explorer 2007 5.17 to overwrite \windows\etphone.dll directly
ok
thx for the tip i'll try it right away
anyone can answer of my question .please ı dont understand what to do with this rom to ınstall pls give me some instruction to take this rom thanx again
What's the difference from PDAVIET 42B ROm???
Any annoying bugs found in this release?
I am trying this ROM right now. So far so good!
The only big issue is that PCM Keyboard's space bar does not work, which is still unresolved from previous versions of PDAViet. I installed Resco Keyboard Pro as an alternative.
ROM is hyper fast!
bug (maybe) A2DP
HI. im using this ROM for 1 day now. when streaming mp3 with A2DP, the winmediaplayer always stop itself after few minutes. not between songs, but in the middle of the song. if i press play then the song will continue for few mins then stop again. have no issue with previous ROM. anyone else try A2DP with this ROM ?
how can ı install this rom pls answer my question.waiting for your answers but noone answer is it to hard to tell how to install
elbennas said:
how can ı install this rom pls answer my question.waiting for your answers but noone answer is it to hard to tell how to install
Click to expand...
Click to collapse
Prepare to get flamed, because the answer is right there on the upgrading forum if you look at the top.
The ROM is working great on my Touch, no problem so far. The only annoying thing is the dialer, if I want to redial the last number the SEND button doesn't do anything, I need to get into the call history > select the last call and press call or send button, Anyway to fix this?
Starting a new thread is always questionable but this is something quite new
and it seems that still many people don't know about ICR-breakthrough on HTC devices. As I know, the first working ICR on HTC was in some custom HD-ROM and smart people managed to extract necesary contents and built cabs from it. For those who want theory and more info - search HD and Diamond forum.
Something important: all the glory belongs to those who extracted parts from the HD-ROM and gave following files to us. I only put those files and my experiences with it together for Raphael owners.
I tried to get it working on my stock 1.9 ROM but no succes after so many attempts so it might seem it doesn't work on it - but I'm not sure. I always achieved only recording both sides via mic.
Now, when I flashed the elite-RC3 I tried few steps and it really works. It works the "inner-way", absollutely not via mic, recordings are clear and very good quality! Some steps are probably redundant but .. I made it this way and it works..
1. install this:
http://forum.xda-developers.com/attachment.php?attachmentid=145688&d=1231739428
(it's from this post: http://forum.xda-developers.com/showpost.php?p=3155880&postcount=87 )
2. extract this to windows directory:
http://forum.xda-developers.com/attachment.php?attachmentid=145698&d=1231743323
(it's from this post: http://forum.xda-developers.com/showpost.php?p=3156069&postcount=91 )
3. soft reset
4. make a call and start recording when calling from dialer's menu - it won't work now,but do it
5. uninstall the cab from step nr. 1
6. soft reset
7. install this
http://forum.xda-developers.com/attachment.php?attachmentid=145741&d=1231759945
(it's from this post: http://forum.xda-developers.com/showpost.php?p=3156859&postcount=10 )
8. soft reset ..and it should work
Why install and then uninstall? Maybe this is redundant but it seems it makes some needed changes to registry - but you can try it without it, I will NOT hard-reset my Raphael to figure out
Btw I had problems with Resco audio recorder, it didn't recognize end of the call and device crashed many times. Vito Audio notes touch works great.
EDIT:
step 0. for those who still can't see the record option in dialer: you can try one from here: http://forum.xda-developers.com/showpost.php?p=3124498&postcount=76
Anyone who tries any method leave a comment here please (with ROM version you have) so the ROMs-developers can obtain this info and eventually add ICR to their new ROMs. Thanks
EDIT2:
------
ROM-specific sollutions based on your feedback:
-elite-RC3: install the latest update from elite-RC3 thread - that's all
-NATF 4.0 & 4.1: use method in post #29 (or #63 - with no dialer included = for 3rd party audio recorders only)
-RomeOS2 1.60.2: use method in post #37 or #89
-stock 1.93: use method in post #29
-2.01.415.3 WWE: use the first (multistep) method above
--still no luck for stock 1.90, NATF 4.2 and any CDMA-ROM
--results with other ROMs weren't reported (or maybe I overlooked them - let me know)
Very appetizing but a bit too experimental and scary. Anyone else tried this?
Will uninstallation restore stuff?
Let us know if anyone gets this to work on a ROM other than Elite-RC3.
interesting method and I think i know some of the reasons why it works, I may have an alternative but I want compare first. Thanks for sharing
The method i use is just install monx's cab and then go to the registry HKLM\Software\HTC\ICR\Recmicgain (don't know the exact title) delete it and soft reset.
Where is the audio saved?
I have a Titan lying around that I can try it on if you think it will work on that. If it's experimental, I'll wait to install it on my Touch Pro. It's not activated, but I can call *611 and record that conversation.
Okay, I did everything written above to the "T". It didn't work on the Titan (maybe it's different for the Touch Pro). I didn't run into any critical problems, it just didn't record. When I try to record, I noticed the audio from the call goes out, and comes back on when I stop recording. When I play the recording, I only hear the input from the mic. This is the case with the standard notes recorder, and with Vito Audio Notes.
If someone wants to try it on their Touch Pro, let us know if it works!
tried on my TP....didn't work for me. I have v5 of the slide to answer Touch HD phone pad. I know the post only shows v4, but I grabbed a copy before he pulled v5 and since it worked, i didn't bother to load v4. Maybe this is why I don't see a record option anywhere? Do I need v4.......do I need to load up vito notes? thanks ...
mxl180 said:
Where is the audio saved?
Click to expand...
Click to collapse
you should have ICR control panel in programs menu after installation. There you can configure recording format and if you want to save recordings to main memory or to storage card. But I recommend to use some other - autorecording app.
Important notice: some people reported that they have to run ICR from dialer once to enable recording in other apps. It's uncertain if this has to be done after each soft reset..
For those who want to try this with other ROM : you must install some other dialer, I didn't have the recording option in the original one. As I remember, I installed S2A dialer from somewhere and it had this option.
noellenchris said:
tried on my TP....didn't work for me. I have v5 of the slide to answer Touch HD phone pad. I know the post only shows v4, but I grabbed a copy before he pulled v5 and since it worked, i didn't bother to load v4. Maybe this is why I don't see a record option anywhere? Do I need v4.......do I need to load up vito notes? thanks ...
Click to expand...
Click to collapse
You don't need Vito notes or any other app, ICR works without it
I tried it but it doesn't seem to work for me, I will try it again
tego said:
You don't need Vito notes or any other app, ICR works without it
Click to expand...
Click to collapse
when i hit the menu during a call , I don't see any options to record....any ideas?
noellenchris said:
when i hit the menu during a call , I don't see any options to record....any ideas?
Click to expand...
Click to collapse
I think there should be that option in your dialer. But try this one>
http://forum.xda-developers.com/showpost.php?p=3124498&postcount=76
tego said:
I think there should be that option in your dialer. But try this one>
http://forum.xda-developers.com/showpost.php?p=3124498&postcount=76
Click to expand...
Click to collapse
I loaded that one, the dialer works.....but no option for record. I will try to load it up again...(voice record software)..
try installing the dialer before the ICR files
y2whisper said:
try installing the dialer before the ICR files
Click to expand...
Click to collapse
followed the above procedures again after installing v4 of the dialer posted above and I still don't see an option to record during a phone call. Do I have to click on note or something? Strange....
has anyone tried this on a CDMA TP?
no luck on Verizon raphael
I tired this on my Vierzon Touch Pro but I get the same results. The other side is faint because it's being recorded via the microphone and not internally. How do you get the phone to record the audio internally and not via the mic? I did everything the original poster said. I'm using the scrosler 3.0 ROM.
This worked for me. No problems yet. Although I might add, both times it recorded correctly. When you said to record it, it would not work, but do it anyways. It seemed to work for me. Thought I'd let everyone know.
anybodii said:
This worked for me. No problems yet. Although I might add, both times it recorded correctly. When you said to record it, it would not work, but do it anyways. It seemed to work for me. Thought I'd let everyone know.
Click to expand...
Click to collapse
It really looks like it's working only on some ROMs. Obviously some new components the elite-ROM developers used are required. Something from HD-ROM?
Anyway if someone next gets it to work please leave comment here with info which ROM & Radio you have.
Whats happened to it? It doesn't seem to be installed on my TD2 rom? Is it possible to installed it from a cab file & if so where can I find the latest version?
Thanks
I'm interested in this question, too ...
I'm interest too !
Why in the original D2 rom there isn't !!!?
It's here
I'm installed it from my old Diamond archive..
It works like a charm..
Dont forget assign Button 1 to voice speed dial..
Using this cab: Can you initiate a call from a bluetooth headset?
Thx.
Tatsch said:
Using this cab: Can you initiate a call from a bluetooth headset?
Thx.
Click to expand...
Click to collapse
Exactly, YES ...
Great, thank you!
No pushing any buttion before?
Is it in English or in multilanguage? Thanks!
Pirreballo said:
Is it in English or in multilanguage? Thanks!
Click to expand...
Click to collapse
Cyberon VSD is English..
Press bluetooth headset call or action button two seconds for activate call thru BT headset...
..and please note, it's not appear in programs folder.. access from settings tab..
Reason4444 said:
I'm installed it from my old Diamond archive..
It works like a charm..
Click to expand...
Click to collapse
Where can I follwow new versions of the cab in the future?
Thx.
Tatsch said:
Where can I follwow new versions of the cab in the future?
Thx.
Click to expand...
Click to collapse
It's preinstalled software.. If new version release on some device, we find it..
BTW, official site link : http://www.cyberon.com.tw/
Works a treat thanks...don't understand why HTC didn't include it in ROM in the 1st place
Adding voice Tag..geting to the ntaive windows menu...
Hi everyone,
In the past I have loved the feature of adding voice tag to my contacts and it Cyberon has a great success in dialing the correct number. I didn't like the MS voice commander's synthesized voice recognition...it rarely dials the correct number.
In Diamond 2 - I had to reboot the phone as soon as Windows 6.1 comes press "Start"--> "Settings" --> then "Voice Speed Dial" and set up voice tags.
Couple of questions?
1) In the older systems - we could add voice tags in the Contact information - Diamond 2 does not seems to have the Voice Tag addition feature? Is this true or am I missing something?
2) Is there an easy way to get to the Windows 6.1 Start menu other than on catching it when rebooting?
Any advise or further clarification would be very much appreciated...
Thanks in advance
Brenda Sheldon
Please no crosspostings - solution here:
Cyberon - Adding voice tag - easy access to Windows Start menu
voice dial
Reason4444 said:
I'm installed it from my old Diamond archive..
It works like a charm..
Dont forget assign Button 1 to voice speed dial..
Click to expand...
Click to collapse
the voice dial is very much necessary for me and was dissapointed not to find it in the diamond2. (I also have diamond1).
I have downloaded this cab and through the file explorer,
installed it successfully. I don't know what to do next. HELP!!
Voice speed dial
PRIMERCG said:
the voice dial is very much necessary for me and was dissapointed not to find it in the diamond2. (I also have diamond1).
I have downloaded this cab and through the file explorer,
installed it successfully. I don't know what to do next. HELP!!
Click to expand...
Click to collapse
Managed to do everything, except .........
"Dont forget assign Button 1 to voice speed dial.."
Can anyone assist? Thanks
Go to settings, all settings, Personal, Buttons and change Assign a program to 'Voice Speed Dial'
Anyway does not work on HD2
I've done all as written in this tread, but as for me it is still impossible to initiate a call by BTHS. As if some parts of BT management profile are missed it first HD2 firmware. Cyberon works properly (initiation by1st button) but can't be managed from BT. Any ideas?
I have the same problem with Cyberon Voice Commander.
I think it may be to do with the headset as some people say it works for them.
I have a Jabra 5020 if that helps.
Cyberon VSP + HD2 + BT handsfree
Reason4444 said:
I'm installed it from my old Diamond archive..
It works like a charm..
Dont forget assign Button 1 to voice speed dial..
Click to expand...
Click to collapse
Hello,
When activated the Cyberon VSD from BT headset button,
The voicetag is received by HD2 microphone instead of BT headset and
The voicetag confirmation is routed to HD2 speaker, not to BT headset.
So I can not use HD2 when on motocycle. But it was OK with TyTN II.
Can you please help, give some tricks?
Thanks...
Tuncay
Hi again.
I try to install some voice command or voice dial software on my Mega and i have some problems.
By first i can't install/use "Microsoft Voice Command", after install and using "voice button" my speaker just play "hype". Few days ago i install this soft and it work for some time, but i hard reset device and now there is no way and version to install it i try:
- 1.6.21725
- 1.6.20771
- 1.6.19971
- 1.6.19965
- 1.6.19214
- 1.6.17913
After this i try alternative soft like:
- Voice Dialer
- Voice2Go
- LookUp
all this soft not work so good as i want.
Before HTC T3333 Mega i use Nokia N95 and i must say it has 1000 times better speech recognition than all i try-it till now on WM6.5.
Can someone tell is there is some other soft worth to try or is there is working version of Microsoft Voice Command for Mega?
Many Thanks.
Ygrek-Ix said:
Hi again.
I try to install some voice command or voice dial software on my Mega and i have some problems.
By first i can't install/use "Microsoft Voice Command", after install and using "voice button" my speaker just play "hype". Few days ago i install this soft and it work for some time, but i hard reset device and now there is no way and version to install it i try:
- 1.6.21725
- 1.6.20771
- 1.6.19971
- 1.6.19965
- 1.6.19214
- 1.6.17913
After this i try alternative soft like:
- Voice Dialer
- Voice2Go
- LookUp
all this soft not work so good as i want.
Before HTC T3333 Mega i use Nokia N95 and i must say it has 1000 times better speech recognition than all i try-it till now on WM6.5.
Can someone tell is there is some other soft worth to try or is there is working version of Microsoft Voice Command for Mega?
Many Thanks.
Click to expand...
Click to collapse
That is good to know! Im getting my touch2 next week. just one question did u completely un install the other package coz sometimes it conflicts with each other.
Thanks
Yes.
Mega has no any voice recognition software installed by default, so i install it each one separately including device reboot or some times even hard reset.
I try to change language, install net framework, uninstall all other software on device. Nothing help.
Ygrek-Ix said:
Yes.
Mega has no any voice recognition software installed by default, so i install it each one separately including device reboot or some times even hard reset.
I try to change language, install net framework, uninstall all other software on device. Nothing help.
Click to expand...
Click to collapse
Ok let me try when mine comes. I will let u know.
Thanks.
If you want i have "demo" versions of all this softs above
Ygrek-Ix said:
Thanks.
If you want i have "demo" versions of all this softs above
Click to expand...
Click to collapse
DEMO version? I have the MS Voice command here. Let me try it when my touch2 comes. the version I have is 1.604622.0 MSVC.
thanks
I found "Cyberon Voice Command" which work perfect and support my native language(Polish). Works perfect but bluetooth can't call voice command
If i solve this problem i win!
I got the same problem on a Samsung SGH i780, on which the Voice Command is not installed by default.
I spent a couple of days on this issue before give up.
So, I hope you will find a solution on the Mega
About "Microsoft Voice Command":
- After installation there was no correct/any entry in "HKLM\SOFTWARE\OEM\VoiceCommand". I correct the path value, but I left the handset in the work, so i can't test it now.
- MVC with connetion with HTC Touch2 Mega have bug, after too long press "Send" button it doesn't work.
maybe you can give us a link to MS voice command
Microsoft Voice Command 1.6.21725
Here you go: RapidShare Link Can be downloaded 10 times
I can't upload it as attachment, so if any one can please do this now in this thread. Thanks.
MS voice Command
Please refer to my posting utilities u will find the link to the ms voice command 1.6
not working
ms voice command does nor work on my htc. it starts and there is the icon in taskbar. but one second later program closes and icon go away ...
jürgen
drjv said:
ms voice command does nor work on my htc. it starts and there is the icon in taskbar. but one second later program closes and icon go away ...
jürgen
Click to expand...
Click to collapse
it works with my mega just fine
drjv said:
ms voice command does nor work on my htc. it starts and there is the icon in taskbar. but one second later program closes and icon go away ...
jürgen
Click to expand...
Click to collapse
What version you use?
so does MS VC works on Touch2? I would like to also control coreplayer using voice commands, anybody hear about that possibility? I'm going to ask on coreplayer forum about that. Would be really awesome to control multimedia and phone via voice commands
On my htc works fine, i don't know how about cooperation with coreplayer.
Tried installing MS Voice command .. but after installing I couldnt find it in the programs ..dont know where it has gone !!
I'm surprised not one of you has mentioned "Tell Me"
get MSVC installed, google samsung TellMe, download and install, works perfectly on my touch 2, well, 90% but thats mostly my accent that causes problems.
So what.... Is there any Voice-Dailing Software, that works with Touch2 AND a Bluetooth-Headset-Button?