[HOW-TO] Manually deodex your phone. - Droid X Themes and Apps

I AM NOT RESPONSIBLE FOR WHATEVER HAPPENS TO YOUR PHONE!
You must be rooted!
This is a guide on manually deodexing, you phone. (Duh!)
The reason I am making this tutorial is because I could not get my theme to work with Teenfaces deodexed nandroid. You may want to follows this if you have the same problem as me, or if you just want to take a shot at doing it.
What you'll need:
A Windows based machine
xUltimate v2.2
Patience
Process:
1. Unzip xUltimate v2.2, and launch "Main.exe"
2. If everything goes well xUlt should recognize the phone and make a connection. You now should see a list of options.
3. Run option 1. After option 1 is done, run option 2.
4. Now these well take a while. Run option 3.
5. IMPORTANT: After you have run option 3, you MUST navigate to the xUltimate folder and find "origi_frame" folder, and delete "guava.odex". It's a bad file, and interferes with deodexing process.
6. Now run option 4, and wait.
7. Exit xUltimate, and put the phone in USB mass storage.
8. Go back into the xUltimate folder and copy "done_frame", and "done_app", and move them to the root of the sdcard.
9. Put the phone in PC mode
10. Open a command prompt, and do the following:
Code:
adb shell
su
stop
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
cp /sdcard/done_app/* /system/app/
cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
reboot
Your phone should now be deodexed!
You may notice an increase in speed, and you now have the ability to edit certain files with greater effects. (i.e. services.jar)
Credits:
Rainabba and Mike919: For initially working with me to get a white clock, and later deodex.
toxman: For testing, and being a huge risk taker.
teenfaces: For letting me use his services.jar
And especially Xeudoxus: For letting me a guinea pig, for xUltimate, and answering my questions. And also for the making the xUltimate tool. It defiantly makes thing easier.

what is deodexing?
Was searching through the forum for a definition but no luck

geoxda said:
what is deodexing?
Was searching through the forum for a definition but no luck
Click to expand...
Click to collapse
it allows us to customize system files so we can theme.
http://www.droidforums.net/forum/dro...-deodexed.html

I get file not found on option 3. Fresh SBF 2.1, only thing is i am rooted... Any Ideas on this?

thank you message too short filler

Don't think you need to do this on 2.1 as you can put in a modified services.jar and it updates the system clock to different colors (usually white).

inzandity said:
Don't think you need to do this on 2.1 as you can put in a modified services.jar and it updates the system clock to different colors (usually white).
Click to expand...
Click to collapse
I want to deodex the phone as suggested by the OP, not just the clock.

Tested and does NOT work with Droid 2 2.2. Phone locks up at "cp /sdcard/done_app/* /system/app"

This must be done one 2.2. I Never ;put of a warning because I assumed the majority of people have already switched.

Can the code above be done on terminal emulator on the droid x

I got to step 4 (which is pressing 3 to start deodexing) and I got this message on the third element:
Starting Bluetooth.odex
*****************************************
* Deodexing... *
Error occured while loading boot class path files. Aborting.
org.jf.dexlib.Code.Analysis.ClassPath$ClassNotFoundException: Could not find superclass Ljavax/obex/ServerRequestHandler;
at org.jf.dexlib.Code.Analysis.ClassPath$ClassDef.loadSuperclass(ClassPath.java:784)
at org.jf.dexlib.Code.Analysis.ClassPath$ClassDef.<init>(ClassPath.java:668)
at org.jf.dexlib.Code.Analysis.ClassPath.loadClassDef(ClassPath.java:280)
at org.jf.dexlib.Code.Analysis.ClassPath.initClassPath(ClassPath.java:163)
at org.jf.dexlib.Code.Analysis.ClassPath.InitializeClassPathFromOdex(ClassPath.java:110)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:93)
at org.jf.baksmali.main.main(main.java:278)
Error while loading class Lcom/android/bluetooth/opp/BluetoothOppObexServerSession; from file .\origi_app\Bluetooth.odex
Error while loading ClassPath class Lcom/android/bluetooth/opp/BluetoothOppObexServerSession;
* *
*****************************************
Restarting Bluetooth.odex
*****************************************
* ERROR! Trying something different! *
* Deodexing... *
Error occured while loading boot class path files. Aborting.
org.jf.dexlib.Code.Analysis.ClassPath$ClassNotFoundException: Could not find superclass Lcom/htc/app/HtcAlertActivity;
at org.jf.dexlib.Code.Analysis.ClassPath$ClassDef.loadSuperclass(ClassPath.java:784)
at org.jf.dexlib.Code.Analysis.ClassPath$ClassDef.<init>(ClassPath.java:668)
at org.jf.dexlib.Code.Analysis.ClassPath.loadClassDef(ClassPath.java:280)
at org.jf.dexlib.Code.Analysis.ClassPath.initClassPath(ClassPath.java:163)
at org.jf.dexlib.Code.Analysis.ClassPath.InitializeClassPath(ClassPath.java:131)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:100)
at org.jf.baksmali.main.main(main.java:278)
Error while loading class Lcom/android/bluetooth/opp/BluetoothOppBtEnableActivity; from file .\origi_app\Bluetooth.odex
Error while loading ClassPath class Lcom/android/bluetooth/opp/BluetoothOppBtEnableActivity;
Press any key to continue . . .
*****************************************
MAJOR ERROR!! WITH DEODEXING! Bluetooth.odex
*****************************************
********DELETING INCORRECT FILES*********
please exit out of window "***Deodexing ADB Window, DO NOT EXIT!***"
Press any key to continue . . .
My DInc. is rooted and running 2.2: 3.21.605.1
Do I need to be in recovery with system mounted to make this work?
Does this only work on the Droid X?

Xxq TZ pxX said:
I got to step 4 (which is pressing 3 to start deodexing) and I got this message on the third element:
Starting Bluetooth.odex
*****************************************
* Deodexing... *
Error occured while loading boot class path files. Aborting.
org.jf.dexlib.Code.Analysis.ClassPath$ClassNotFoundException: Could not find superclass Ljavax/obex/ServerRequestHandler;
at org.jf.dexlib.Code.Analysis.ClassPath$ClassDef.loadSuperclass(ClassPath.java:784)
at org.jf.dexlib.Code.Analysis.ClassPath$ClassDef.<init>(ClassPath.java:668)
at org.jf.dexlib.Code.Analysis.ClassPath.loadClassDef(ClassPath.java:280)
at org.jf.dexlib.Code.Analysis.ClassPath.initClassPath(ClassPath.java:163)
at org.jf.dexlib.Code.Analysis.ClassPath.InitializeClassPathFromOdex(ClassPath.java:110)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:93)
at org.jf.baksmali.main.main(main.java:278)
Error while loading class Lcom/android/bluetooth/opp/BluetoothOppObexServerSession; from file .\origi_app\Bluetooth.odex
Error while loading ClassPath class Lcom/android/bluetooth/opp/BluetoothOppObexServerSession;
* *
*****************************************
Restarting Bluetooth.odex
*****************************************
* ERROR! Trying something different! *
* Deodexing... *
Error occured while loading boot class path files. Aborting.
org.jf.dexlib.Code.Analysis.ClassPath$ClassNotFoundException: Could not find superclass Lcom/htc/app/HtcAlertActivity;
at org.jf.dexlib.Code.Analysis.ClassPath$ClassDef.loadSuperclass(ClassPath.java:784)
at org.jf.dexlib.Code.Analysis.ClassPath$ClassDef.<init>(ClassPath.java:668)
at org.jf.dexlib.Code.Analysis.ClassPath.loadClassDef(ClassPath.java:280)
at org.jf.dexlib.Code.Analysis.ClassPath.initClassPath(ClassPath.java:163)
at org.jf.dexlib.Code.Analysis.ClassPath.InitializeClassPath(ClassPath.java:131)
at org.jf.baksmali.baksmali.disassembleDexFile(baksmali.java:100)
at org.jf.baksmali.main.main(main.java:278)
Error while loading class Lcom/android/bluetooth/opp/BluetoothOppBtEnableActivity; from file .\origi_app\Bluetooth.odex
Error while loading ClassPath class Lcom/android/bluetooth/opp/BluetoothOppBtEnableActivity;
Press any key to continue . . .
*****************************************
MAJOR ERROR!! WITH DEODEXING! Bluetooth.odex
*****************************************
********DELETING INCORRECT FILES*********
please exit out of window "***Deodexing ADB Window, DO NOT EXIT!***"
Press any key to continue . . .
My DInc. is rooted and running 2.2: 3.21.605.1
Do I need to be in recovery with system mounted to make this work?
Does this only work on the Droid X?
Click to expand...
Click to collapse
Lol, sorry to be rude. But this is in teh Droid X section. I'm sure the Dinc has some way of being deodexed.

Hi I'm a noob when it comes to droid x and theming can you run the code from terminal emulator on the droid x or do you need a laptop to do it thanks

bigdade said:
Hi I'm a noob when it comes to droid x and theming can you run the code from terminal emulator on the droid x or do you need a laptop to do it thanks
Click to expand...
Click to collapse
What do you mean the code?
If you mean what is in the code tags. No. If be you mean the numbered directions no. you need a computer.

I meant what is in the code box with the commands su and such

Whew!! Finally got this done, after 4 .sbf flashes?! BUT how can I be sure??

When I ran "mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system" at the end of the process I got "Device or Resource Busy", is that ok or am I going to have trouble?

urufu_shinjiro said:
When I ran "mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system" at the end of the process I got "Device or Resource Busy", is that ok or am I going to have trouble?
Click to expand...
Click to collapse
I had this as well. All that part does is re-mount the system partition as RO (Read Only). This is done when you reboot as well. So if you rebooted at the end of the process, it was taken care of.

i cant get past option 3 , keeps sayin file not not , i look in the folders and all of the files were put in there

i have a rooted Droid X running 2.2 with some bloatware removed. am i a candidate for this?
also how's the success/failure rate with this method?

Related

Few EXt2 questions

Is it possible to veiw the files in the EXt2 partition from our G1 terminal? If so, can we also delete files? If so, someone explain how, thanks.
asuming is mounted on /system/sd
just
cd /system/sd
ls -la /system/sd
to list the files
is their a way to erase those files
There are commands for deleting files on Android. Look up the Linux Command prompt commands for performing those functions.
If you've rooted your phone and don't know the commands already, you haven't been paying attention to the instructions.
ls = directory listing
cp = copy
mv = move/rename
rm = remove
Those are the very basics. Remember that Unix-like operating systems are case-sensitive and file.txt is different from File.txt or file.TXT.
If you're using wildcards to delete everything, take a precaution and use the dot-slash. It could save you a lot of trouble by ensuring you're only deleting files in the current working directory. To remove all text files in a directory, for example, you'd type rm ./*.txt
god, i hate how rude people are. I grew up with DOS, so dir, and del come more naturally to me than linux commands. So just ease up on the ppl that don't know linux. I didn't know linux til i started to IRC and wanted to run an eggdrop bot. Not like everyone has irc'd or compiled, or whatever. Heck, it has been so long now, I could not write an irc script or egg addon, and I think i was the first to develop some scripts in IRC 20 years ago. So all I can say is chill.
Shaggy
??huh??
whats the beef all about?
you can google the command and linux and probably have a ton of sites that list and explain the usage and stuff like that for *nix commands unix is a very old OS linus torvalds just woke up 1 day at age 15 or sumthin and said im gonna make a unix kernal that runs on my intel based pc and then instead of selling it and making a fortune I'll give it away and still make a fortune.
LINUS is the greatest man of our time, when the other OS was charging BIG $ to run Apache web servers in the .com boom (even more so now) linux was FREE and gave better throughput on the same hardware
Now if you want a pretty box booklet and packaging as you have become accustomed they have them to, some just feel better if they pay for it, free must not be as good as the one that costs right?
why did I bother just rambling, please ignore the babbling lunatic in the corner he is harmless
bhang
beartard said:
If you've rooted your phone and don't know the commands already, you haven't been paying attention to the instructions.
ls = directory listing
cp = copy
mv = move/rename
rm = remove
Those are the very basics. Remember that Unix-like operating systems are case-sensitive and file.txt is different from File.txt or file.TXT.
If you're using wildcards to delete everything, take a precaution and use the dot-slash. It could save you a lot of trouble by ensuring you're only deleting files in the current working directory. To remove all text files in a directory, for example, you'd type rm ./*.txt
Click to expand...
Click to collapse
if you dontknow how to be polite to the noobz then dont say anything at all. let someone else answer their questions.
Hi Beartard,
Thanks for the info.
This site has such a wealth of information, that it can be overwhelming to many members.
Can you tell me how to copy my apps-private from my ext2 partition to my sd card partition so I can back them up?
Thanks
beartard said:
If you've rooted your phone and don't know the commands already, you haven't been paying attention to the instructions.
ls = directory listing
cp = copy
mv = move/rename
rm = remove
Those are the very basics. Remember that Unix-like operating systems are case-sensitive and file.txt is different from File.txt or file.TXT.
If you're using wildcards to delete everything, take a precaution and use the dot-slash. It could save you a lot of trouble by ensuring you're only deleting files in the current working directory. To remove all text files in a directory, for example, you'd type rm ./*.txt
Click to expand...
Click to collapse
uh you wan't to copy your "app-private" folder as a backup in to yoru sdcard correct? well try this
busybox cp -a /system/sd/app-private /sdcard/app-private
if it don't allows you to copy do this command to re mount the system as read-write
mount -oremount,rw /dev/block/mtdblock3 /system
Hi Nitro .
I tried it both ways and it says operation not permitted.
-------------------
Update:
But wait, I connected my phone to the computer and the app-private is copied to the sdcard.
Your procedure worked!
I erased the folder that was copied to test it again.
Then I used just this set of commands and it worked again:
busybox cp -a /system/sd/app-private /sdcard/app-private
So you still get the same error, but it works.
Thanks alot Nitro!!!
Nitro212 said:
uh you wan't to copy your "app-private" folder as a backup in to yoru sdcard correct? well try this
busybox cp -a /system/sd/app-private /sdcard/app-private
if it don't allows you to copy do this command to re mount the system as read-write
mount -oremount,rw /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
u tried it as root? what error u got?
well glad it worked.
Hi,
The error says:
"cannot preserve ownership of ... cannot preserve permissions of ... operation not permitted"
for every file it tries to transfer.
But then when you look in your sdcard the app-private is there.
So it is a false error.
Thanks again.
Nitro212 said:
uh you wan't to copy your "app-private" folder as a backup in to yoru sdcard correct? well try this
busybox cp -a /system/sd/app-private /sdcard/app-private
if it don't allows you to copy do this command to re mount the system as read-write
mount -oremount,rw /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
It's not working for me...
My error is this:
cp: cannot stat '/system/sd/app-private': No such file or directory
Hi,
Use terminal emulator jf 1.41 or better
type su enter
then the busybox commands
Connect your phone to your computer and look on your memory card.
app-private is there
Proxin said:
It's not working for me...
My error is this:
cp: cannot stat '/system/sd/app-private': No such file or directory
Click to expand...
Click to collapse
bestwebs said:
Hi,
Use terminal emulator jf 1.41 or better
type su enter
then the busybox commands
Connect your phone to your computer and look on your memory card.
app-private is there
Click to expand...
Click to collapse
hey guys need some help here i have the same problem, (as far as the error saying 'no such file or dir') and i tried your suggestion about typing su first then the busybox commands.
i have the most current terminal emulator, unfortunately i still continue to get the same error every time i try to run the busybox commands. it just simply say 'no such file or directory"
you guys have any suggestions for me to try ?
any help would be great.
the error i get is "cannot preserve permissions of" i think that error is not something harmful im n o *nix expert but is just saying it wont save the permision of that folder i think...
Code:
# mkdir /sdcard/bk
mkdir /sdcard/bk
# busybox cp -rf /data/app-private/ /sdcard/bk
busybox cp -rf /data/app-private/ /sdcard/bk
cp: cannot preserve permissions of '/sdcard/bk/app-private': Operation not permi
tted
# ls /sdcard/bk
ls /sdcard/bk
app-private
thats what i did.. worked for me.. moved the app-private in to a folder named bk inside the sdcard
Hi,
We are assuming that you have already moved your apps and caches to the memory in a ext2 partition, correct?
Otherwise this will not work.
I 1st followed all the instructions in this post:
http://forum.xda-developers.com/showthread.php?t=468959
All this has to be done 1st including the 2 step 13's
onikus said:
hey guys need some help here i have the same problem, (as far as the error saying 'no such file or dir') and i tried your suggestion about typing su first then the busybox commands.
i have the most current terminal emulator, unfortunately i still continue to get the same error every time i try to run the busybox commands. it just simply say 'no such file or directory"
you guys have any suggestions for me to try ?
any help would be great.
Click to expand...
Click to collapse
nitro all i can say is thank you very much, i was looking through a 15 yr old unix book looking up commands, and it's just been so damn long ago i couldn't put it together.
thanks a ton. i'm sure you saved me at least a few hours.
@bestwebs ya i have done everything else including moving things to the ext2 partition i was just stuck on a few comands here and there.
but again thanks to both of you, and i'm all setup up now.
Hi,
Nitro is a real blast!
Glad it's working.

GScript * Easily launch/save shell scripts from within Android UI * - Useful scripts

As some of you might have seen or even used, I have created an application that allows executing of shell scripts from within Android and it will even allow you to create a direct shortcut on your homescreen to a script ( for example to start Debian or reboot your phone ).
I know a lot of developers ( I also didnt at first ) don't look in the "applications and games" section, but i thought it was the best place to post the actual application.
I will keep updating that post with the actual application process/updates, but ive created this thread to see if people ( I think most of the actual linux experienced people are in this section ) would like to share their linux knowledge to other peoples uploading useful .sh files ( for backing up stuff etc etc ), so that less experienced can just load them in to my application, without risking all typos.
So if you have a nice script that is useful please upload it so we can all benefit from it.
The actual application can be found here:
http://forum.xda-developers.com/showthread.php?t=486486
Please dont ask question or place suggestions about the application in this thread, but use the one Ive created for the actual development and keep this thread for scripts only.
Regards,
Rob
I was thinking about starting a thread just like this one-- for everyone to post up their scripts. Don't know why I didn't. Anyway, I asked the question awhile back how to create a script for remounting the file system as read/write, which led to my discovery of GScript. In any case, here's what I was told to use:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
Be advised that I have no idea if this actually works or not. Perhaps someone could test and post the results?
tubaking182 said:
that takes to long, i find it easier when i am using the comp to just click my terminal(which is almost always up and running) and type reboot_phone(i have a script on the computer that contains the comand adb shell reboot) and also another for rebooting into recovery and one more for bootloader
i guess i'm lazy but if i can find a way to automate anything i do in life i go ahead and do it. i have a script for nearly everything i do to my phone.
on a more on-topic note, i was hoping someone would post the command to reboot and apply an update.zip, i know it is in the JF autoupdater, but i just want to be able to hit a shortcut on my home screen to apply themes as well.
Click to expand...
Click to collapse
Code:
su
echo "boot-recovery
--update_package=/sdcard/update.zip" > /cache/recovery/command
reboot recovery
Untested, you might have to play around with the /sdcard/update.zip to get it to load properly, I'm not sure exactly how you put the path in there. This will, for sure, reboot it into recovery mode, and tries to automatically apply an update.zip.
Edit:
--update_package=sdcard:update.zip
Should do it. I hope.
Here's a script I built to make a rom into the "lite" version needed by many of the themes. It's not much but it's my first one.
Code:
mount -o rw,remount -t yaffs2, /dev/block/mtdblock /system
rm -r /system/media/audio/ringtones
rm -r /system/media/audio/notifications
reboot
Gary13579 said:
Code:
su
echo "boot-recovery
--update_package=/sdcard/update.zip" > /cache/recovery/command
reboot recovery
Untested, you might have to play around with the /sdcard/update.zip to get it to load properly, I'm not sure exactly how you put the path in there. This will, for sure, reboot it into recovery mode, and tries to automatically apply an update.zip.
Edit:
--update_package=sdcard:update.zip
Should do it. I hope.
Click to expand...
Click to collapse
You don't need the "su" at the beginning. Gscript has a checkbox to indicate if SU is needed and will add it on it's own. Putting it in causes the script to hang.
Anyway to make it close the script window when the script completes? Right now I have it doing an app backup and echoing DONE. But I'd like to automate the process if possible.
Exit doesn't seem to work.
Gary13579 said:
Code:
su
echo "boot-recovery
--update_package=/sdcard/update.zip" > /cache/recovery/command
reboot recovery
Untested, you might have to play around with the /sdcard/update.zip to get it to load properly, I'm not sure exactly how you put the path in there. This will, for sure, reboot it into recovery mode, and tries to automatically apply an update.zip.
Edit:
--update_package=sdcard:update.zip
Should do it. I hope.
Click to expand...
Click to collapse
It does reboot into recovery mode but I get the error "Can't mount /sdcard/Update.zip Installation aborted."
I'm able to just apply the update by pressing Alt+S but would be nice if it was all automated.
wpbcubsfan said:
It does reboot into recovery mode but I get the error "Can't mount /sdcard/Update.zip Installation aborted."
I'm able to just apply the update by pressing Alt+S but would be nice if it was all automated.
Click to expand...
Click to collapse
Same result for me.
Got it!!!
ok!
used this as script to change theme
cp /sdcard/themes/aero/update.zip /sdcard/
echo "boot-recovery
--update_package=SDCARD:update.zip" > /cache/recovery/command
reboot recovery
Needed to use caps for SDCARD!!!
found it poking around the recovery.c file
better still no need to copy over update.zip in root Just in case of emergency.
Code:
echo "boot-recovery
--update_package=SDCARD:themes/aero/update.zip" > /cache/recovery/command
reboot recovery
beagz said:
ok!
used this as script to change theme
cp /sdcard/themes/aero/update.zip /sdcard/
echo "boot-recovery
--update_package=SDCARD:update.zip" > /cache/recovery/command
reboot recovery
Needed to use caps for SDCARD!!!
found it poking around the recovery.c file
better still no need to copy over update.zip in root Just in case of emergency.
Code:
echo "boot-recovery
--update_package=SDCARD:themes/aero/update.zip" > /cache/recovery/command
reboot recovery
Click to expand...
Click to collapse
Dude, you rock! Thanks!
Clear Caches
I use this script to clear almost all of the app caches
Code:
#Deletes all caches in one fell swoop :]
#Locations of the caches were taken from various sites, including xda and androidcommunity.com
#written by indiekid97
#Deletes browser cache
rm -R /data/data/com.android.browser/cache/webviewCache
#Deletes Maps cache
rm -R /data/data/com.google.android.apps.maps/files
#Deletes StreetView
rm -R /data/data/com.google.android.street/cache
#Deletes Market cache
rm -R /data/data/com.android.vending/cache
#Deletes Tunewiki cache
rm -R /data/data/com.tunewiki.lyricplayer.android/cache/webviewCache
#Deletes Myspace cache
rm -R /data/data/com.myspace.android/files
#Deletes GMail cache
rm -R /data/data/com.google.android.gm/cache/webviewCache
Copy from /system/app
I get get the phone to copy from data app and private however, when I try to copy apps from /system/app it does nothing.
Mod_edit
any ideas?
I also tried to cd in the script to navigate to the data and still it only runs the first two copy commands.
removed copyright procedureYou can not display procedures concerning the two app folders being transferred to Fat32 portion of card.
a1t said:
I get get the phone to copy from data app and private however, when I try to copy apps from /system/app it does nothing.
Mod_edit
any ideas?
I also tried to cd in the script to navigate to the data and still it only runs the first two copy commands.
Click to expand...
Click to collapse
Woops
Sorry dudes. If we can still talk about any possibilities, I'm down. if not, oh well. now on eggshells
looking for script to move a specific directory on /system to a location on my sdcard
if anyone is interested PM me.
What would the script be to disable USB mounting to the computer? It's a hassle for me to have to un-plug the USB cable when I want to unmount, it would be very beneficial to have a quick press of an icon on the Home screen to do this
*Edit: after tinkering around with it for a bit, I see that this cannot be done- I tried mounting the SD card to computer and then running a script, *any* script will not load because GScript requires /sdcard/gscript_tmp.sh to be accessable in order to run a script.
Mounting to computer and then running a script from GScript simply shows an error:
Code:
Error:
/sdcard/gscript_tmp.sh
SO, in order for it to work, GScript would probably have to be configured to search for the script elsewhere to load while the SD card is mounted.
Here is a small script to back up current system sounds to the SD card, probably most useful if you do this prior to using the Make Lite script:
Code:
cp -r /system/media/audio /sdcard/audio
If there are any errors please let me know.
Once they're backed up, you can merge the folder into /sdcard/media for proper use with Ringdroid.
I'm not sure whether to use cp -r or cp -a, so I will stick with -r for now and see if anyone has any other suggestion.
quick question....
where can i find out what the "flags" mean.
-a
-t
and so on.
Mikey1022 said:
quick question....
where can i find out what the "flags" mean.
-a
-t
and so on.
Click to expand...
Click to collapse
I found this link useful to your question, might want to scroll down a bit to see the most direct answer to what you were wondering:
http://www.freeos.com/articles/4414/
Hope that helps
a start
http://www.computerhope.com/unix/ucp.htm
a1t said:
http://www.computerhope.com/unix/ucp.htm
Click to expand...
Click to collapse
Proxin said:
I found this link useful to your question, might want to scroll down a bit to see the most direct answer to what you were wondering:
http://www.freeos.com/articles/4414/
Hope that helps
Click to expand...
Click to collapse
Thank you to both of you

[TUTORIAL] Install applications into SD Card for Samsung Galaxy 5 (i5500)

DISCLAIMER: DO THIS AT YOUR OWN RISK. I AM NOT RESPONSIBLE IF YOU BRICK / RUIN YOUR PHONE IN ANY WAY.
Hi Everyone,
I have some good news for the owners of Samsung Galaxy 5 (i5500) Smartphones.
Doing some research on Google and reading about efforts from other people who could install applications on SD card on other android phones, I was able to develop a method to install application into SD card for the Galaxy 5. Better yet, you won't even need a custom Rom.
Before I get into the specifcs let me state that the following steps are manual and no application is provided to automate the process, so advanced computer skill is required and some knowledge of unix/linux is a plus.
Here we go: PLEASE READ THE WHOLE THING BEFORE YOU START. I MAY HAVE OMMITED SOME COMMANDS OUT OF LACK OF ATTENTION.
1) You'll need to root your phone. There is a lot of guides about this available, just google for it. I've used the SuperOneClick Root to do this.
2) Partition your sd card like this: 1 - FAT, 2 - Linux ext2. Again, there is a lot of guides about this on the net, just google again. I've used Paragon Partition Manager 2010 to lower the size of my FAT partition, leaving a 550MB unallocated space at the end of the card. Then I formatted this space as ext2 in linux, using ubuntu live CD. Most guides around there recommends that you keep this partition between 500~750MB, so I didn’t try with greater sizes. Also, i kept my partition 1 as FAT 16, but FAT 32 might actually work too, try that if you want and post me a reply.
3) Download Titanium Backup (or another app backup tool) from market and backup your applications. You may need to restore your applications to correct some permission problems that may occur after completing this guide.
4) Install busybox. BusyBox is a software application that provides many standard Unix tools, which are not available on stock android. You can get a copy of busybox by clicking on “problems?” button on Titanium Backup main window. It will get installed on /data/data/com.keramidas.TitaniumBackup/files.
5) If you still don’t have Android SDK installed on your PC, download and install it from Google. You’ll need ADB (Android Debug Bridge), which is included in the SDK, to proceed. Now open a shell connection with your device by typing:
Code:
adb shell
Just keep in mind that you MUST be logged as root. Root command prompt is recognized by the # character. If you don’t have root type the ‘su’ command. If even with ‘su’ you couldn’t get root, please review step 1.
6) Create ‘sd’ folder int /system:
Code:
cd /system
mkdir sd
7) Mount ext2 partition into /system/sd
Code:
mount -t ext2 /dev/block/mmcblk0p2 /system/sd
8) Create a folder to store the applications into ext2 partition:
Code:
cd /system/sd
mkdir app
9) Copy busybox to /system/bin
Code:
cat /data/data/com.keramidas.TitaniumBackup/files/busybox > /system/bin/busybox
chmod 755 /system/bin/busybox
10) Copy your applications to ext2 partition:
Code:
busybox cp /data/app/* /system/sd/app/
11) Change permissions of copied applications:
Code:
cd /system/sd/app
chown system.system *
chmod 644 *
12) Now comes the tricky part: making Android mount your new partition at boot time. All the hard work would be useless if Android discarded the mount points every time we restarted our phones. To do this we’ll need to create 2 scripts and store then into /system/etc. Obviously the scripts should be started by init.rc and need to run as root. Fortunately Android’s init.rc have a gap that makes this possible. The scripts are named install-recovery.sh and init-sd2.sh.
install-recovery.sh content:
Code:
#!/system/bin/sh
/system/etc/init-sd2.sh&
init-sd2.sh content:
Code:
#!/system/bin/sh
MYLOG=/data/install-recovery.log
echo "$(date) Starting install-recovery.sh" > $MYLOG
echo "$(date) Waiting SD to become ready..." >> $MYLOG
sleep 10
mount -t ext2 /dev/block/mmcblk0p2 /system/sd 1>>$MYLOG 2>>$MYLOG
mount -o bind /system/sd/app /data/app 1>>$MYLOG 2>>$MYLOG
mount >> $MYLOG
echo "$(date) Finishing install-recovery.sh" >> $MYLOG
If you plan to edit this files on windows I recommend a tool that is capable of keeping UNIX file format, just like notepad++ free tool.
13) After placing the scripts, change their permissions:
Code:
cd /system/etc
chmod 555 install-recovery.sh
chmod 555 init-sd2.sh
14) Rename the default application folder. If everything works fine you can remove this later to save space:
Code:
cd /data
mv app app_old
mkdir app
chown system.system app
chmod 755 app
15) Restart your phone and cross your fingers
16) If you have problems with your widgets don’t worry. You just need to remove then from your homescreen and add again.
17) Check if your applications are running as they should. Restore backups you’ve made with Titanium Backup for the applications showing problems.
18) If your partition didn’t mount at boot, check log file at /data/install-recovery.log
19) From now on your new applications will be installed on your SD Card. You can modify the scripts to store other folders from /data into the ext2 partition as needed. I’ve been running my applications from SD Card for a week now without any problems or bugs.
20) If you can’t make it work, post your question here and I will try to help you out.
21) Donations are welcomed, just drop some money into my paypal account. Just kidding
Good luck and cya!
can this script use for moving /data/data to EXT2?
if can, from where i should start type the script?
i'm still newbie on this
so i'm alittle bit confused, i hope you can help me and sorry for my bad english
i'm already succes from step 1 to step 11
but i'm little confused at step 12
can you explain how to make the script?
should i make those 2 script via notepad++ and then copy it to /system/sd and then continue to step 13?
or should i just type everything on step 12 after step 11 in cmd prompt?
the problem is, if i make the script from notepad++ the android system will just discard my mount point when i restart my phone
and if i just type everything on the step 12 in comand prompt, when i'm type chmod 555 install-recovery.sh and chmod 555 init-sd2.sh like in the step 13, it always say that install-recovery.sh and init-sd2.sh file is not found?
so what should i do?
i'm stuck on step 12
step 12, type it on notepad++ and then you have to change the extension of the file with .sh, after that copied the 2 files to /system/etc
andikasuhendar said:
step 12, type it on notepad++ and then you have to change the extension of the file with .sh, after that copied the 2 files to /system/etc
Click to expand...
Click to collapse
i've already done that
but when i make the script via notepad ++, i'm already make the save type become .sh, so isn't it just the same?
but when i reboot the phone it's still not working
But how to copy this two script files to system/etc??? it's saying permision denied..
But how to copy this two script files to system/etc??? it's saying permision denied..
Click to expand...
Click to collapse
I'm use root explorer to move it to system/etc
The script can be moved but it still doesn't work at all :-(
-------------------------------------
Sent via the XDA Tapatalk App
And i can't move them even with root explorer.. i don't get what i'm doing wrong (
@agus
about the scripts, u can check with root explorer, try to view the script and make sure it was the exact same from the script above, coz i experience the same problem for the first time i try this. if u sure that the script are same then try to execute it using root explorer and then go to titanium backup and see if there is there is another storage (usually there is internal and SD card only).
@stasic
use the root explorer to copy the script to /system/etc, don't forget to change the root explorer option from R/O to R/W, this option should be on top of the page, just touch it to change from R/O to R/W.
andikasuhendar said:
@agus
about the scripts, u can check with root explorer, try to view the script and make sure it was the exact same from the script above, coz i experience the same problem for the first time i try this. if u sure that the script are same then try to execute it using root explorer and then go to titanium backup and see if there is there is another storage (usually there is internal and SD card only).
@stasic
use the root explorer to copy the script to /system/etc, don't forget to change the root explorer option from R/O to R/W, this option should be on top of the page, just touch it to change from R/O to R/W.
Click to expand...
Click to collapse
veeeerrrryyyyyyyyy biiiiiiigggggggggggg thaaaaaaannnnnkkkkkssssss brrroooo
you was right, after i check the script via root explorer, the script was not the same, after i fix it, everything works like a charm
in a step 2... how to change linux ext2???
any software can change from FAT to ext2???
I've changed root explorer option to R/W and still no luck..
@agus
sama2 bro AKA ur welcome bro, have fun with the app2sd hehehe
@nima
search on google, how to format EXT2, if i correct u can use paragon partition for windows user, but if u use macintosh u can just go to disk utility and make partition with EXT2 format
@stasic
go to the /system/etc and see if it already R/W or still R/O
It's written that R/W but when I copy and paste still nothing happens..
thx guy.... i must try it
andikasuhendar said:
@stasic
go to the /system/etc and see if it already R/W or still R/O
Click to expand...
Click to collapse
i've rooted my g5 using superoneclick
but i still have R/O in /system/etc
when i tap R/O on the screen, i wont changed to R/W
what should i do?
maaf inggris nya acak2an
@siap
siapakahaku said:
i've rooted my g5 using superoneclick
but i still have R/O in /system/etc
when i tap R/O on the screen, i wont changed to R/W
what should i do?
maaf inggris nya acak2an
Click to expand...
Click to collapse
In your PC command prompt execute:
Code:
adb shell
Make sure you are loged in as root and in ADB SHELL try this:
Code:
mount -o rw,remount /dev/stl12 /system
Then execute:
Code:
mount
If your mount result has a line like the one bellow, with the rw set, you'll be able to copy the files.
Code:
/dev/stl12 /system rfs rw,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
@stasic
stas1c said:
It's written that R/W but when I copy and paste still nothing happens..
Click to expand...
Click to collapse
Try the same thing I posted above. I don't have Root Explorer installed here, so you should be able to finish this guide without it.
stuck in step 2
cant mkdir....
Hi, nice guide!
I succeded with this the first time I tried but now I have changed to a larger sd card and I can't get it to work.
The log file says that it failed to mount the mmcblk0p2 folder, and now when I check it doesn't even exist. What should I do?
Hope I can get help.. thankful for response. /Mattefacit

[Tutorial]Deodexing + Zipaligning Galaxy Gio GT-S5660

Advantages or disadvantages
- Odexed ROMs are slightly faster, deodexed ROMs are slightly slower
+ You can make custom themes for your ROM
+ Performance los is negligible.
Requirements
xUltimate - http://www.droidforums.net/forum/xeudoxus/47283-release-xultimate.html
Busybox installed
Root
Automatic deodexing - Method 1, by r33p
1. Connect phone to computer
2. Start xUltimate, we will now get the required files from our phone to deodex and zipalign it which we will describe in the 3rd step.
3. Select option #15 then "do it all".
Deodexing (little harder, but contains useful information for your future Galaxy Gio modding experience)- Method 2, by me
1. Connect phone to computer
2. Start xUltimate, we will now get the required files from our phone to deodex and zipalign it which we will describe in the 3rd step.
3. On the main menu of xUltimate, choose option 5 (Pull and deodex all). Everything will be done for you here. Don't worry. You will see all your finished files in the folders 'done_app' and 'done_frame' which are located in the installation directory of xUltimate.
4. move folders 'done_app' and 'done_frame' folders to your sdcard, you can find these folders in the directory of xUltimate as described in the previous step.
5. Make sure the sdcard is not mounted to pc anymore
6. Open Windows Command Prompt and type the following commands.
adb shell
su
stop
mount -o remount,rw /dev/block/stl12 /system
rm /system/app/*.odex
rm /system/framework/*.odex
busybox cp /sdcard/done_app/* /system/app/
busybox cp /sdcard/done_frame/* /system/framework/
chmod 644 /system/app/*
chmod 644 /system/framework/*
mount -o remount,ro /dev/block/stl12 /system
sync
reboot recovery
Click to expand...
Click to collapse
7. Now data and cache reset in the recovery menu...
8. reboot
If one of the commands, for example 'cp' is not found, try putting busybox in front of the command:
eg: busybox cp /sdcard/done_frame/* /system/framework/
How to odex again
This may put you in the right direction. You may need to edit some steps.
http://forum.xda-developers.com/showthread.php?t=1124034
If you like my work please donate
Paypal:
Bankaccount: in private message
Updated my tutorial. Now everything works.
What does this do to my gio?
// Thanks from the noob
why the hassle? just let xultimate do it all automatic -> select option #15 then "do it all"
yep
Thanks.. ;-)
Would it work with others samsung devices?
Gonna try with 5510
Sent from my GT-I9100 using Tapatalk
dann3_86 said:
What does this do to my gio?
// Thanks from the noob
Click to expand...
Click to collapse
I am curious to
I suggest you google deodexing and zipaligning.
Deodexing in short means that it will allow you to have custom themes.
Zipaligning improves performance of the apk/jar files when reading
There is a lot of information you might want to look up!
I just added r33p's suggestion. Thanks!
Dhuu, just google it.............
I did, but it gives no answers.
I thought it was about the holy grail, or the fountain of youth..............
But no..........
But comes close
So tell me, does it works on the fly or must you reboot to aply changes?
I tiedy this metod and it works. Tank you
I'm having a problem..
I'm on xUltimate, I go to the advanced menu (15) and I type 1 (Do everything) and then it says that I don't have files in done_app folder.
Please help
Edit: I have rooted my phone, it's on Gingerbread.xxkpo. Do I have to Un-Root my phone and then do this ? Also can I root it back when the ROM is on ?
Please reply fast :S
I'm having this issue,,, what does it mean? i pulled out all the files with the automatic process and went fine. But then in the deoxed process:
How can i solve it? Thanks :3

[Q] Anyone have Linux/Ubuntu/Fedora Working Currently On GB?

Problem:
I've worked with every available distribution of Linux, trying to get the damn thing working on my phone. Troubleshooting the ***t out of it, and no deal. Constant errors/files not found etc. So, rather than post my logs and ask for help troubleshooting them (as I've obviously been unable to do), I thought I'd just ask:
Does anybody have a Linux build (besides android!) working on their phone that's running Gingerbread or ICS? If yes, can you post your software specs?
Here are mine currently:
Busybox- v1.19.3-Stericson in /system/xbin
Firmware Version- 2.3.5
Baseband Version- T959VUVKG6
Kernel- 2.6.35.7-T959VUVKI3-CL611444
Build Number- Gingerbread.VUVKI3
Mod Version- Octaine Team Acid
Thanks, this has been a pain in my **s for too long now!
S
I had both Fedora and Ubuntu working on Froyo at one point through lots of modifying and editing of the scripts.
What do you need them for anyway? I think it's more of a hassle to set them up than it's worth.
Well, I am working quite a bit now with linux for servers and such, and it's good to have a system (even minimal) that I can use/reference, plus it helps me get better at it.
Get this: I was so frustrated that I went back to BlackIce (keeping my gb bootloaders) and the damn thing loads right up, ubuntu 11.04, no problem. So, I then loaded up Valhalla's GB build and, sure enough, that works too. So, going with my luck I load octane 2.x GB which i've been digging of late and no deal, ubuntu just won't load.
Now, trying the same trick I cannot get it to work. It just won't load now when I SH it. Here's the instructions that worked before (and I've tried them all!):
http://www.nerd65536.com/2011/07/installing-ubuntu-in-android-version-2.html
Also, I hard bricked again (corrupted bootloaders from a Parallels Windows stallout) but did Adam's UnBrickable Mod and that's all better. Everybody needs to check it out, it's awesome:
http://forum.xda-developers.com/showthread.php?t=1333424
So FBI, any idea why linux is so temperamental? Once it SH's properly, it always works.
(Thanks to all the developers for their great roms!)
Yeah I noticed that slight changes from different ROMs based on the same kernel base had that effect too. I'm thinking it had to do something with the busybox installations since I had to edit the script sometimes. For some reason on some installs running mount won't work unless you use it as busybox mount. It was very iffy like that. I haven't even tried it again because of how frustrating it is to get even a boot. The other thing is that if you try to do a shutdown from ubutu/fedora it doesn't even kill the processes all the way so the only way you can clear some ram up with with a reboot.
Yeah man, I was figuring Busybox myself. I've tried old installs, new installs, xbin only, bin only, xbin & bin, etc. It's so frustrating because I can't figure it out. When it was working it was great, pretty stable.
So the first problem always lists as:
Remounting /system rw...
Mount: no such file or directory
Usage: mount [-r] [-w] etc, etc
So does this tell us that the system is not mounted rw? I used the Mount/system r/w application, but I cannot verify it's doing it's job. Everything is rooted properly, CWM also.
In Terminal on the phone I ran:
"mount | grep system"
which gave me
"/dev/block/st19 on /system type ext4 (rw,relatime,barrier=0,data=writeback)"
which leads me to believe the system is r/w.
I'm converting the system back from ext4 using CWM Voodoo to disable Lagfix and system Lagfix to see if this has any effect. Will report.
No deal. Didn't do a damn thing. I'm going to crack this if it's the last thing I do....
I'm using Better Terminal Pro, Bash shell, and under command line in options it lists the Shell as: /system/bin/sh-
The sh install.sh also tells me:
"Mounting: Loopback mount
mknod: /dev/block/loop254: File exists"
Does this mean that all (255) of my loops are used? Do I need to remove programs?
The available loop device thing never got resolved. Nameless originally fixed it by making it use 254 so that there was a low chance of the loop device being available, but the phone's OS is very iffy about letting a new loop device get assigned to a system image file. Can't really help you out since I never got it to consistently mount with different roms.
Linux on SGS4G Working! Done and Done!
Figured it out.
I can get Ubuntu 11.04, 11.10 & Debian 6 to mount repeatedly in all sorts of ui updatable configurations using this information:
http://www.nerd65536.com/2011/07/installing-ubuntu-in-android-version-2.html
It's a friggin Christmas Miracle! Can't tell you how much time I've wasted working this out, and it all boils down to the sh and run scripts.
So, without further ado, here goes.
!!Make sure you're rooted!!
!!The quotes just tell you what to type. Don't type them!!
1.
Download one of the three builds on the website listed above (or build your own, it should work fine). Extract it from tar.bz2, they should all extract to a linux file, this includes the necessary scripts. Put it on the sd-card on your phone.
2.
Download the new scripts that (Nerd) listed found here: http://ohm.nerd65536.com/android-linux/scripts-latest.tar.bz2
And extract them. You'll have another file that says linux. Open it, take the three files inside (install.sh, root-scripts & scripts) and paste them in the linux folder you moved to your sd-card. They will overwrite the ones currently there. These scripts work for sgs4g, the originals did not.
3.
Install the latest BusyBox in xbin if it's not already installed (must be rooted). Latest is 1.19.3
4.
Download a terminal client, like Better Terminal Emulator or Android Terminal Emulator. I use the first. The terminal needs to run the commands as root, especially the linux vnc command as it didn't want to work for me no matter if I started by typing su. Better Terminal Emulator has a check box to always start in root.
5.
Open up your terminal emulator and type su if you are not rooted there. Then change directory to the linux file on the sd-card. run the sh file there.
Like this:
"su"
"cd /sdcard/linux"
"sh install.sh"
If it works, the resulting dialog in terminal won't throw up any problems.
6.
Get back to / on sd by typing in terminal:
"cd /"
You should then have a: / # prompt, which means you are still rooted.
Enter:
"linux"
Which should result in a: [email protected]:/#
This means Linux is running. Congratulations. It should continue to run unless you shut down your phone.
7.
Download a VNC client, like Android VNC Viewer (free) or Remote VNC Pro, which I use. Add a new entry in it, with the following settings:
Host: localhost
Port: 5901
Password: cheesecake
Color: 24-bit
Name: Linux
When that's done save if you can or back out if you can't, and go back to your terminal emulator.
8.
It should still say: [email protected]:/#
If it doesn't, fine, if it does, just go back to root prompt by typing:
"exit"
Which should get you: / #. Then type:
"linux vnc"
Which should run itself and mount the chroot environment. It should tell you your new 'X' desktop is localhost:1, and have a: / # prompt again.
It might also ask you for a password, if so then put whatever password you'll remember in that's longer than 6 characters and verify it. This only happens once.
9.
Go back to your VNC client and if you entered a password in step 8. then edit your listing to your password instead of cheesecake, if not then don't.
Click on the Linux link and BAM! (shameless Emerilism), you're at your Linux desktop which should be running a iceWM desktop interface, which is fast. The LXDE desktop is nicer and if you want that then go into you're terminal and get into the linux shell by typing:
"linux"
And then switch to LXDE by typing:
"apt-get autoremove icewm- lxde+"
Which will run through the removal/ installation, and verify you want to download the <400mb files. Type:
"y"
And give it time to finish. When finished, just go back to your VNC client and hit Linux again, and you will have a nice looking functional desktop, with a cpu load graph on the bottom. I tried using Gnome desktop and Unity 2d, but both of these would install and not fully run with all options. They are heavier and slower, but cool non-the-less. Let me know if anyone has luck with these on Android.
Notes-
You only have to type "linux vnc" once in terminal to start linux every time you boot your phone. Otherwise, just open your VNC client and click on Linux to use it. Easy!
You will want to update and upgrade your linux after install, do so by typing in terminal:
"apt-get update"
"apt-get upgrade"
Also, you might run across a problem if you try to add-apt-repository, that's because that python command is not present. To use it, enable by typing:
"apt-get install python-software-properties"
Also of note, the downloadable linux builds are sized to about 2.15gig on your sd, which is big enough for most. There is a way to resize them which I tried but it gave me trouble in loading. I will try again and see if I can get it to work.
Here's the link from Dangermouse:
http://www.androidfanatic.com/community-forums.html?func=view&catid=9&id=1610
Thanks to Nerd65536 for the info, write-up and files. He fixed my problem.
sconsylman said:
Also of note, the downloadable linux builds are sized to about 2.15gig on your sd, which is big enough for most. There is a way to resize them which I tried but it gave me trouble in loading. I will try again and see if I can get it to work.
Here's the link from Dangermouse:
Click to expand...
Click to collapse
You're welcome.
It's actually a lot easier than that to make the image larger. Just pop the SD card into a Linux machine and:
(Assuming the original file is: /media/phone/linux/linux.img)
Code:
resize2fs /media/phone/linux/linux.img 4095M
And you're done. resize2fs is made of magic!
Note: Most SD cards are FAT32, which has a filesize limit of 4GiB. The above instructions will make the file a megabyte less than that.
nerd65536:
Thanks! Worked like a charm. Had to e2fsck -f /media/SDCARD/linux/linux.img (phone plugged in to Mint) before i did it to check over the file system, but then it ran immediately. Much appreciated.
Have you had any luck on native boot? I've been working a little on this, as I can't run BackTrack arm well virtually, it gets buggy. Granted the telephony systems won't work during, but the functionality should be pretty good if we could run it standard.
Also, while I'm thinking of it, is it possible to run the img from an ext4 partition on the card? I have an existing one being used for link2sd files and would much prefer using it as it's a far superior file system to fat32, without the 4G limits. Vnc should have no problem graphically, but would the linux.img chroot properly?
It would probably work but you would have to alter the script to mount the other partition if it doesn't do it automatically and change the path. Shouldn't be too hard.
I'm getting an error when I try running sh install.sh:
Code:
# sh install.sh
readlink: applet not found
Remounting /system rw ...
sh: Can't open /linux/scripts/fsrw
Installing scripts in /system/bin ...
cd: can't cd to /linux/scripts
cp: write error: No space left on device
cp: omitting directory 'root-scripts'
Unable to chmod /system/bin/root-scripts: No such file or directory
cp: omitting directory 'scripts'
Unable to chmod /system/bin/scripts: No such file or directory
cp: omitting directory 'tmp'
Unable to chmod /system/bin/tmp: No such file or directory
Mounting the Linux image ...
install.sh: /system/bin/linux: not found
Customizing the image ...
install.sh: cannot create /data/local/mnt/etc/resolv.conf: directory nonexistent
install.sh: cannot create /data/local/mnt/etc/resolv.conf: directory nonexistent
Installing root-scripts ...
mkdir failed for /data/local/mnt/root/scripts, No such file or directory
Unable to chmod /data/local/mnt/root/scripts: No such file or directory
cp: can't stat '/linux/root-scripts/*': No such file or directory
Unable to chmod /data/local/mnt/root/scripts/*: No such file or directory
Install finished
# linux
linux: not found
NuVanDibe said:
I'm getting an error when I try running sh install.sh:
Code:
# sh install.sh
readlink: applet not found
Remounting /system rw ...
sh: Can't open /linux/scripts/fsrw
Installing scripts in /system/bin ...
cd: can't cd to /linux/scripts
cp: write error: No space left on device
cp: omitting directory 'root-scripts'
Unable to chmod /system/bin/root-scripts: No such file or directory
cp: omitting directory 'scripts'
Unable to chmod /system/bin/scripts: No such file or directory
cp: omitting directory 'tmp'
Unable to chmod /system/bin/tmp: No such file or directory
Mounting the Linux image ...
install.sh: /system/bin/linux: not found
Customizing the image ...
install.sh: cannot create /data/local/mnt/etc/resolv.conf: directory nonexistent
install.sh: cannot create /data/local/mnt/etc/resolv.conf: directory nonexistent
Installing root-scripts ...
mkdir failed for /data/local/mnt/root/scripts, No such file or directory
Unable to chmod /data/local/mnt/root/scripts: No such file or directory
cp: can't stat '/linux/root-scripts/*': No such file or directory
Unable to chmod /data/local/mnt/root/scripts/*: No such file or directory
Install finished
# linux
linux: not found
Click to expand...
Click to collapse
cp: write-error.. no space left on device? You need more space dude

Categories

Resources