Database Info

fastboot questions

I come from the world of Windows Mobile and have just recetly delved into hacking my G1. While I've had no problems installing jesusfreke's images or themes...I'm struggling with how to get fastboot to work.
Perhaps someone can give me some guidance. Anyone willing to give me some simple step by step instructions. I've searched for this and i think I have everything i need, but I'm unable to get to a point where I can type in commands. when i try to run adb, it open very briefly and closes.
What am i doing wrong?
Thanks,
Jason

Go to start -> run -> type in CMD
Navigate to the folder where adb is located.
Then type in adb devices to see if it finds ur device.
If not then make sure you have it plugged in and USB debugging is turned on in the phones settings under Development.
Also download the usb drivers/or the whole SDK if you havent yet.

nosaj13 said:
when i try to run adb, it open very briefly and closes.
Click to expand...
Click to collapse
If you try to execute a text mode executable in windows, it will close the terminal window as soon as the program finishes. If you run adb without any arguments, it will print the arguments out terminate. I could say the solution is to open run as and type cmd, but the true answer is to install Linux

nosaj13 said:
I come from the world of Windows Mobile and have just recetly delved into hacking my G1. While I've had no problems installing jesusfreke's images or themes...I'm struggling with how to get fastboot to work.
Perhaps someone can give me some guidance. Anyone willing to give me some simple step by step instructions. I've searched for this and i think I have everything i need, but I'm unable to get to a point where I can type in commands. when i try to run adb, it open very briefly and closes.
What am i doing wrong?
Thanks,
Jason
Click to expand...
Click to collapse
1. Download this
2. Extract the contents of the fastboot directory to the root of your C drive.
3. Go Start -> Run -> type 'cmd' (no quotes) and hit enter
4. Type 'c:' (no quotes) and hit enter
5. With your phone plugged in, you should be able to type 'adb devices' and it should return your phones serial number, which is usually in HTXXXXXXXX format. If it does not, make sure debugging is enabled on your phone and you have the adb drivers installed.
6. type 'adb shell reboot bootloader' and hit enter. The screen on your phone will go blank for a second and then you should be in the SPL with the skating androids. Make sure you see "FASTBOOT" at the bottom of the screen.
7. type 'fastboot devices' and hit enter. If you see your phone's serial number again, you have successfully established a fastboot connection with the phone and can run commands such as:
fastboot erase <partition> (erases the given partition)
fastboot flash <partition> <file.img> (overwrites and flashes given partition with given file. This is how one would restore from a nandroid backup)
fastboot reboot (reboots the device into user mode)
Hope that helps. Have fun

when i type adp devices i get an error that says "adp is not recognized as an internal or external command, operable program, or batch file"
what am i doing wrong?

nosaj13 said:
when i type adp devices i get an error that says "adp is not recognized as an internal or external command, operable program, or batch file"
what am i doing wrong?
Click to expand...
Click to collapse
First, the command is adb devices not adp. Second, make sure you copied the contents of the fastboot directory to the C drive. Third, make sure you that when you type 'c:' into the command line, the command prompt actually changes to "C:\>"

Datruesurfer said:
1. Download this
2. Extract the contents of the fastboot directory to the root of your C drive.
3. Go Start -> Run -> type 'cmd' (no quotes) and hit enter
4. Type 'c:' (no quotes) and hit enter
5. With your phone plugged in, you should be able to type 'adb devices' and it should return your phones serial number, which is usually in HTXXXXXXXX format. If it does not, make sure debugging is enabled on your phone and you have the adb drivers installed.
6. type 'adb shell reboot bootloader' and hit enter. The screen on your phone will go blank for a second and then you should be in the SPL with the skating androids. Make sure you see "FASTBOOT" at the bottom of the screen.
7. type 'fastboot devices' and hit enter. If you see your phone's serial number again, you have successfully established a fastboot connection with the phone and can run commands such as:
fastboot erase <partition> (erases the given partition)
fastboot flash <partition> <file.img> (overwrites and flashes given partition with given file. This is how one would restore from a nandroid backup)
fastboot reboot (reboots the device into user mode)
Hope that helps. Have fun
Click to expand...
Click to collapse
i did all the above steps with no problem at all till i got to number 7. when i typed in fastboot devices it just goes to the next prompt without my phone showing up.
If i plug in my g1 in normal mode i see it at the top under adb and in the usb section as a mass storage device.
In bootloader mode with fastboot on the screen it doesnt show up anywhere in the device manager.
Also when i follow the above quoted steps and type in the "adb shell reboot bootloader" and hit enter i hear the ding you hear when you unplug a usb device, and all instances of the phone then leave the device manager.
i have also uninstalled and reinstalled all drivers for the phone and all drivers that have to do with the usb ports on my win xp machine.
Anyone have any ideas i could try?

I think you need this program. I put it on my desktop, then just ran cmd, directed to it, and type in fastboot.

I7oobie said:
I think you need this program. I put it on my desktop, then just ran cmd, directed to it, and type in fastboot.
Click to expand...
Click to collapse
thats not it. i have that in the sys 32 folder and also on desktop

Fastboot mode not recognized
I'm having the same problem. I've installed all the correct drivers and in normal mode, I see the Android Composite Device (or something similar) in Device Manager.
As soon as I go into SPL mode (the 3 skateboarding androids screen), the device does not show up.
Anyone have any ideas? Thanks!

Datruesurfer said:
First, the command is adb devices not adp. Second, make sure you copied the contents of the fastboot directory to the C drive. Third, make sure you that when you type 'c:' into the command line, the command prompt actually changes to "C:\>"
Click to expand...
Click to collapse
When I'm in the Command Prompt and I type C:, the directory still reads C:\Documents and Setting\Reids. It won't change to only C:

Hi,
You have to do this to get back to c:
cd\
press enter
That should do it.

bestwebs said:
Hi,
You have to do this to get back to c:
cd\
press enter
That should do it.
Click to expand...
Click to collapse
Ok, thanks a lot. Got it working now.

I need help trying to flash my cupcake images that I have stored in my fastboot folder. I attached the pictures below. I will accept any help I can get.

EDIT: Doh, I thought I was in another topic.
My bad.

Are adb & adb's dll files located inside the same folder as fastboot??? They are suppose too be.
Is your usb cord directly plugged into your system or thru a hub??
Your phone, i bet is under usb mass....to check, expand your device manager window.
Expand your USB-Mass storage list.
With your phone in fastboot mode, click on the camera key and the back key. With enough time inbetween for your system to recognize that there might be a device hooked up.
Notice any change in the list??

Anyone wanting good instructions
http://androidcommunity.com/forums/f28/nandroid-v2-0-full-nand-backup-and-restore-tool-9336/
Read post 2 and go!

this seems like the most easiest thing to do but i still cant get it to work
i have downloaded everything needed and see ADB Interface on my device manager with a yellow mark on it when i try to update the dirver it fails and i got the drivers and point them to it but seems not to work
my phone is on the fastboot screen with the android skateboards guys
i dont know whats going on if someone know what am also doing wrong can tell me please...
This is what i get

Mytouch wont boot past mytouch3g screen:(

so i tried flashing with a new rom and when i restarted the phone it went to the green mytouch3g screen and just hangs there. i tried everything to restore the phone using the android recovery menu by holding the home and power button. but now im left with a phone with no operating system so it wont boot. i dont have a mini SD adapter either so is there any options that i can take to fix it or at least bring it back to stock ROM. thanks

If you have adb you can ums_enable after a format of your card to place an update that way.

how do you do that? im pretty new to this whole thing

Do you have adb installed?

snowmaniac22 said:
how do you do that? im pretty new to this whole thing
Click to expand...
Click to collapse
1. Download the rom you want to flash the phone with.
2. Download androidsdk if you don’t have it installed yet.
3. Copy the rom file to your androidsdk folder to keep things simple.
For example:
C:\androidsdk\tools
Place the rom in the tools folder
4. Once that has been completed, place your phone back into recovery mode.
5. Connect your phone with your usb cable, one side to the phone and the other to your computer usb port.
6. Now go to start/run and type cmd followed by the enter key.
7. Then type c: followed by the enter key.
8. Then type cd androidsdk\tools followed by the enter key. (this will depend on your location of your androidsdk folder.
9. Then type the following to connect to your phone.
10. Type adb devices to start up the services.
11. Type adb remount, followed by the enter key. (This might now work in recovery mode, but I'm use to adding it.
12. Type adb shell, followed by the enter key.
13. While in adb, type mount /sdcard or mount /system, followed by the enter key
14. Now exit from adb
15. Now you should be back in the tools folder of your androidsdk folder.
16. Lets get started with pushing the rom over to your phone.
17. Type adb push rom.zip /sdcard
18. Press the enter key
19. The file should start to copy to your phone.
20. Wait until it completes before moving forward.
21. Once the file has been copied type reboot recovery, followed by the enter key.
22. You should do this to insure that the recovery mode see your new rom.
23. Once back in, simply choose your new rom from the menu options and flash away.
I hope this helps,

*Edit
What he said.

htcclay said:
Boot your phone into recovery and on your command line in adb type
ums_enable
Now your mytouch's sd card should pop up like it normally does when you mount it.
Click to expand...
Click to collapse
lol,
And I've been doing it the long way the entire time.

ttran001 said:
lol,
And I've been doing it the long way the entire time.
Click to expand...
Click to collapse
You know its good to learn your way.
It teaches people rather then the quick fix.
Teach a man to fish....something like that...lol

ok does it make a difference im on a MAC haha i download the tools for MAC but im also using RAv1.2.1G if that makes a difference. i understand the PC side but still on the Mac side so little lost

Not sure on mac. Maybe it's the same?
Sorry

snowmaniac22 said:
ok does it make a difference im on a MAC haha i download the tools for MAC but im also using RAv1.2.1G if that makes a difference. i understand the PC side but still on the Mac side so little lost
Click to expand...
Click to collapse
I only use Linux and windows, but I did find this.
The steps provided in this thread should work once your androidsdk has been setup correctly.
Setup Androidsdk

Boot Animation with SkyRaider

Sorry about the post but I cannot find the post were it tells me how to install custom boot animations. I also need to be able to do the sounds. As far as I understand I have to put it in the media folder. I found the original one but it does not allow me to move it. I'm assuming I have to do it from recovery but I don't know how. Detailed instructions would be appreciated. I have a cold and the old brain is doing so well. Thanks

s-off your dinc and you can do it while booted

I was trying to avoid that because they do not have a way to undo s-off yet. Just incase my phone dies I dont want verizon to say I voided the warranty. Any way to do it without?

You can flash some of them from rom manager...that's how I did mine.

If you have rooted your phone, which you must have in order to install a custom ROM, you've already voided your warranty.
Adding S-OFF wouldn't change anything in the eyes of Verizon, and you can always drop your phone until it's physically broken if you need to take it in.

rom manager -> download rom -> Ihtfp69 -> boot animations -> download -> pick one
thats where i got mine from

MMBosstones86 said:
rom manager -> download rom -> Ihtfp69 -> boot animations -> download -> pick one
thats where i got mine from
Click to expand...
Click to collapse
When I try to install from Rom manager it doesn't load it says verification failed or something. Does anyone know how to manually install Droid 2 boot screen.
HTC incredible
SR sense 2. 5. 2
Radio 2. 15
Sent from my ADR6300 using XDA App

Did mine 'manually', since I'm rooted I have clockwork mod installed.
1. Boot into recovery (clockwork mod)
2. launched android SDK adb daemon
3. moved file from 'tools' folder of sdk to the proper destination on the phone.
4. Done.

Doctor Butts said:
Did mine 'manually', since I'm rooted I have clockwork mod installed.
1. Boot into recovery (clockwork mod)
2. launched android SDK adb daemon
3. moved file from 'tools' folder of sdk to the proper destination on the phone.
4. Done.
Click to expand...
Click to collapse
I'm not sure how to do step 2 your referring to. If you have a link to a thread that explains how to do that, it would be greatly appreciated.
Sent from my ADR6300 using XDA App

Well, you have to go to the android website and download the android SDK. Install it somewhere on your computer that's easy to access, preferably put the folder at the root of one of your hard drives.
You'll go into command prompt after that to do a lot of the work to transfer files.
So, make sure USB debugging is enabled (just in case) and boot your phone into cwm recovery. Connect the phone to your computer via USB.
in command prompt, cd to the android sdk's tools directory. From there, you can use the adb commands to transfer files.
So, for me, after connecting the phone I do the following in command prompt:
cd G:
cd androidsdk/tools
and then I use ADB to communicate with phone, first by verifying the phone is connected:
adb devices
(if adb is on your pc, it will auto run the daemon if it is not running)
If your phone shows up in recovery mode, you're set.
You may need to go into cwm and mount your system/sd card before transferring the file.
From there, you use adb shell to acess the phone's file systems.
If you put the boot animation to the phone you'll do something like (while in shell) mv bootanimation.zip system/somethingorother/bootanimation.zip
But don't take the above line as gospel. I dont remember the exact command line to use. Check the thread on "How 2 - ADB, Rooting...." for a list of commands in ADB shell and search for a webpage that gives basic linux commands.

Doctor Butts said:
Well, you have to go to the android website and download the android SDK. Install it somewhere on your computer that's easy to access, preferably put the folder at the root of one of your hard drives.
You'll go into command prompt after that to do a lot of the work to transfer files.
So, make sure USB debugging is enabled (just in case) and boot your phone into cwm recovery. Connect the phone to your computer via USB.
in command prompt, cd to the android sdk's tools directory. From there, you can use the adb commands to transfer files.
So, for me, after connecting the phone I do the following in command prompt:
cd G:
cd androidsdk/tools
and then I use ADB to communicate with phone, first by verifying the phone is connected:
adb devices
(if adb is on your pc, it will auto run the daemon if it is not running)
If your phone shows up in recovery mode, you're set.
You may need to go into cwm and mount your system/sd card before transferring the file.
From there, you use adb shell to acess the phone's file systems.
If you put the boot animation to the phone you'll do something like (while in shell) mv bootanimation.zip system/somethingorother/bootanimation.zip
But don't take the above line as gospel. I dont remember the exact command line to use. Check the thread on "How 2 - ADB, Rooting...." for a list of commands in ADB shell and search for a webpage that gives basic linux commands.
Click to expand...
Click to collapse
THANK YOU SIR. MUCH APPRECIATED.
Sent from my ADR6300 using XDA App

100$ to whoever can help me solve this (NO JOKE)

i have already checked xda for a solution but couldnt find one i even checked google and youtube and still found nothing i am in need help bad. i will even pay someone paypal if they can help me with my phone
i downloaded the matrix rom and i liked it but i wanted to go back to ice cream sandwhich for the day so when i tried to go to recovery it froze on the google screen while trying to get to recovery i kept trying and trying but my recovery wasnt working i couldnt get to it. so i went to titanium back up and clicked un-install all system and data because i thought it was when i restored all system and data from ICS but after i did the uninstall i kept getting a force close alot of things and i got all the way down to one and it was process.android i think and everytime i clicked force close it popped right bacj up instently. so i took out the battery and put it back in and now i cant power on my phone it gets stuck on the matrix screen. can you please help me i can only acces the volume up power button menu.
*solved*

Fastboot OEM lock. Fastboot OEM unlock and start the process all over again. Also wipe everything 3 times.
Including system and boot.
Also double check you're installing all the compatible zips.
Sent from my Nexus S using xda premium

it wont let me do any of that it keeps saying waiting for device then gets stuck on that ive installed pdanet but it keeps giving me a htc sync error =1 and my bootloader and everything was already unlocked i dont know what to do i cant turn my phone on or get to recovery. thats why im paying 100 dollars to anyone who can help me restore my phone and make sure its up and running ive been trying for 2 days now and thats my work phone and everything im stressed

Serious_Beans said:
Fastboot OEM lock. Fastboot OEM unlock and start the process all over again. Also wipe everything 3 times.
Including system and boot.
Also double check you're installing all the compatible zips.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
when i turn on the phone and it keeps trying to load the matrix animation the phone still connects with my computer and says removable disk f but when i try and click on it. it says please insert a disk into removable disk f

Hmm uninstall all the USB drivers and reinstall them
Sent from my Nexus S using xda premium

Serious_Beans said:
Hmm uninstall all the USB drivers and reinstall them
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
at the bottom of my phone screen it says fastboot statud - FAILInvalid command

If you have the SDK installed on your computer. Here is what you need to do in order to get back into recovery.
#1 Boot your phone into bootloader, Vol up and power
-Plug into computer using usb while in fastboot(bootloader) and see if it recognizes it. Type adb devices it should list a serial number for your device.
( My SDK is installed in c:\android\) so you would type something like cd c:\android\tools and hit enter and then type adb devices )
#2 If you have installed sdk and pdanet drivers and your computer still does not see your phone in fastboot is this. Go to the folder where sdk is installed and copy everything excluding the folders that is in the Platform-tools folder into the tools folder. After that download Stock Phone files unzip it into a folder on desktop.
Dont run the script yet, what you have to do is after you unzip the stock look in the folder you just unzipped them in and you should see a file called fastboot, adb, and some other .dll's AdbWinApi.dll and etc move only these 4 files to your sdk tools folder.
#3 Now re open a cmd prompt and go back to c:\android\tools (enter) then type in adb devices and your computer should recognize it this time around.
Then all there is left to do is download the recovery of your choice here's mine Recovery and after you download it rename it recovery. After you rename it move it to sdk tools folder and while still in fastboot(bootloader) type in fastboot flash recovery recovery.img
You should now be able to enter recovery and flash roms again
EDIT #1
If you havent setup SDK here is a wiki guide on how to do so http://wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK

Make sure you are using the most up to date drivers and then use ADB to install recovery again. If I'm understanding it right I think that's what you need to try.
Sent from my Supercharged MikG'd up EVO 4g while eatin some Chop Suey.
Hit that thanks button if I managed to help.

Envynet said:
If you have the SDK installed on your computer. Here is what you need to do in order to get back into recovery.
#1 Boot your phone into bootloader, Vol up and power
-Plug into computer using usb while in fastboot(bootloader) and see if it recognizes it. Type adb devices it should list a serial number for your device.
( My SDK is installed in c:\android\) so you would type something like cd c:\android\tools and hit enter and then type adb devices )
#2 If you have installed sdk and pdanet drivers and your computer still does not see your phone in fastboot is this. Go to the folder where sdk is installed and copy everything excluding the folders that is in the Platform-tools folder into the tools folder. After that download Stock Phone files unzip it into a folder on desktop.
Dont run the script yet, what you have to do is after you unzip the stock look in the folder you just unzipped them in and you should see a file called fastboot, adb, and some other .dll's AdbWinApi.dll and etc move only these 4 files to your sdk tools folder.
#3 Now re open a cmd prompt and go back to c:\android\tools (enter) then type in adb devices and your computer should recognize it this time around.
Then all there is left to do is download the recovery of your choice here's mine Recovery and after you download it rename it recovery. After you rename it move it to sdk tools folder and while still in fastboot(bootloader) type in fastboot flash recovery recovery.img
You should now be able to enter recovery and flash roms again
EDIT #1
If you havent setup SDK here is a wiki guide on how to do so http://wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK
Click to expand...
Click to collapse
can someone help me threw team viewer and just access my computer threw that and help me that way

Envynet said:
If you have the SDK installed on your computer. Here is what you need to do in order to get back into recovery.
#1 Boot your phone into bootloader, Vol up and power
-Plug into computer using usb while in fastboot(bootloader) and see if it recognizes it. Type adb devices it should list a serial number for your device.
( My SDK is installed in c:\android\) so you would type something like cd c:\android\tools and hit enter and then type adb devices )
#2 If you have installed sdk and pdanet drivers and your computer still does not see your phone in fastboot is this. Go to the folder where sdk is installed and copy everything excluding the folders that is in the Platform-tools folder into the tools folder. After that download Stock Phone files unzip it into a folder on desktop.
Dont run the script yet, what you have to do is after you unzip the stock look in the folder you just unzipped them in and you should see a file called fastboot, adb, and some other .dll's AdbWinApi.dll and etc move only these 4 files to your sdk tools folder.
#3 Now re open a cmd prompt and go back to c:\android\tools (enter) then type in adb devices and your computer should recognize it this time around.
Then all there is left to do is download the recovery of your choice here's mine Recovery and after you download it rename it recovery. After you rename it move it to sdk tools folder and while still in fastboot(bootloader) type in fastboot flash recovery recovery.img
You should now be able to enter recovery and flash roms again
EDIT #1
If you havent setup SDK here is a wiki guide on how to do so http://wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK
Click to expand...
Click to collapse
Dang you must have put this up like 2 second before I posted mine lol
Sent from my Supercharged MikG'd up EVO 4g while eatin some Chop Suey.
Hit that thanks button if I managed to help.

Maybe you should just try Odin.
http://forum.xda-developers.com/showthread.php?t=1022481
DL: http://droidangel.blogspot.com/2011/05/odin-multi-downloader-flasher-program.html
Greetz

OP... check your PM inbox.

Why on earth have you posted this thread 6 times? Lol
Sent from my Nexus S using XDA App

scottypeterson said:
Dang you must have put this up like 2 second before I posted mine lol
Sent from my Supercharged MikG'd up EVO 4g while eatin some Chop Suey.
Hit that thanks button if I managed to help.
Click to expand...
Click to collapse
after i type adb it says adb isnt recognized as a internel or external cammand operable program or batch file

Ok I don't know if you tried this already but do this:
1. download the recovery img from here:
http://wiki.cyanogenmod.com/wiki/Ne...de#Installing_the_ClockworkMod_Recovery_Image
and put it somewhere on ur computer
2. plug phone into comp
3. boot the phone into the fastboot mode with the android guy
4. fastboot erase recovery
5. fastboot flash recovery ____.img
and if you can boot into recovery now, just wipe data, cache, and dalvik cache and flash the ics rom
see if that helps

mathkid95 said:
Ok I don't know if you tried this already but do this:
1. download the recovery img from here:
http://wiki.cyanogenmod.com/wiki/Ne...de#Installing_the_ClockworkMod_Recovery_Image
and put it somewhere on ur computer
2. plug phone into comp
3. boot the phone into the fastboot mode with the android guy
4. fastboot erase recovery
5. fastboot flash recovery ____.img
and if you can boot into recovery now, just wipe data, cache, and dalvik cache and flash the ics rom
see if that helps
Click to expand...
Click to collapse
I suggested this about 7 hours and 3 threads ago.. I think the problem is either he doesn't have the proper drivers or SDK setup properly.
Da_Reaper said:
after i type adb it says adb isnt recognized as a internel or external cammand operable program or batch file
Click to expand...
Click to collapse
This leads me to believe that SDK isn't set up properly. If it's set up correct you should be able to access adb without the phone even connected.

Yes thank you guys i love u all

check your mp , excepted if you found the solution.

$100? Lol
Sent from my Nexus S using XDA App

crump84 said:
I suggested this about 7 hours and 3 threads ago.. I think the problem is either he doesn't have the proper drivers or SDK setup properly.
This leads me to believe that SDK isn't set up properly. If it's set up correct you should be able to access adb without the phone even connected.
Click to expand...
Click to collapse
Yeah excuse me for not reading all 6 threads
Sent from my Nexus S using XDA App

Broken screen, need to retrieve files off phone! help please

My screen first cracked and then the LCD completely went now... I have files I need to retrieve off the phone. It is rooted and running some ICS build... I believe the phone is in USB debugging mode, the screen still 'works' I can unlock the phone but nothing is displayed on the screen. Possibly someone could help me out with the adb process for pulling the contents off the /sd
Any help will be GREATLY appreciated, thank you for your time.

ur usb mass storage should still work. can u just plug ur phone to a usb port and get things off the phone ?

As previously stated. I believe the phone was in USB debugging mode. And now the screen is completely black... impossible to navigate to where i need to be.

You'll need adb setup on your computer, and you'll need to cd your way into the folder with adb.exe. Forgive me for hotlinking, but this will make it easier: Download this file, courtesy of NexusSHacks.com (I believe it is Zedomax around here). I would advise to unzip the contents in this file to your C:\Nexus directory, so that adb.exe is at C:\Nexus\adb.exe.
Now, plug in your phone. Open your start menu and search for "cmd" and open up Command Prompt. This is the basic Windows CLI (Command Line Interface).
First, you'll need to open the directory of the Nexus folder you created earlier. To do this, type in the command prompt:
Code:
cd C:\Nexus
Now, you want to make sure adb sees your phone:
Code:
adb devices
The adb service should start and if it sees your phone it will pop up a serial number. If there is no serial number, you can't use adb while inside android and you'll need to tick the option or find an alternative way. Assuming it finds your device, you are good to go.
In order to copy the /sdcard folder of your Nexus S, you will use the pull command. We will throw all of the files into C:\Nexus\sdcard, for reference. So in the command prompt, type:
Code:
adb pull /sdcard .\sdcard
It looks a little confusing but don't stress. Just make sure you type it in exactly (dot, correct slash, etc). This will take a little while since it might transfer up to ~15GB worth. You'll see a new line with "C:\Nexus>" with a flashing cursor when it is done. Then you can view all the contents of your sdcard at C:\Nexus\sdcard and do with them as you please.
Also note, for this you'll need up to ~15GB of free space on your C:\ partition, make sure you have this before you start. Good luck

old post I know, but I just dropped my Samsung Captivate (rooted with debugging on) and internal screen cracked (gorilla glass is perfectly fine!), so I am in the same boat. After DAYS... actually DAYS of trying everything from every forum I FOUND A FIX!!!
Now admittedly, I am unsure which of these two (or both) fixed the issue, but here is what I did:
via Google Play's online "shop", I installed "Auto Mount Your SD Card" by JRTStudio (admittingly, unsure if this did anything as I cannot verify if it installed or anything via the phone)
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5qcnRzdHVkaW8uYXV0b21vdW50Il0.
then I DL'ed MoboRobo and after a few frustrated phone reboots, usb cable connections and much cursing IT CONNECTED!
http://www.moborobo.com/
I am currently DLing all my files from my broken phone!
I had to pass this along as I said... NOBODY seems to know about this as it has taken me DAYS to do this! Not even ATT (Current carrier) nor Spring (whom I am switching to in a month or so) could help me!

You save my life with that "moborobo". Thank you very much.

Glad I could help!!!

Thanks went to both of u, quit important piece of knowledge.
One question; r u downloading "moborobo" on ur Android, on your pc or on both of them?

just on PC, not needed on the phone unless you want to go via WiFi

Harbb said:
If there is no serial number, you can't use adb while inside android and you'll need to tick the option or find an alternative way.
Click to expand...
Click to collapse
What do you mean by this?
My adb service doesn't detect my phone, I used Droidzone's tutorial. I believe usb debugging needs to be on for adb to work, which in my case is useless cause my screen is broken so can't turn on usb debugging.
This is what happens:
---------------------------
C:\>adb devices
List of devices attached
C:\>
---------------------------
---------- Post added at 11:31 PM ---------- Previous post was at 11:23 PM ----------
^when I say broken, I mean the whole screen is distorted, I cannot see anything

droidoidoid said:
What do you mean by this?
My adb service doesn't detect my phone, I used Droidzone's tutorial. I believe usb debugging needs to be on for adb to work, which in my case is useless cause my screen is broken so can't turn on usb debugging.
This is what happens:
---------------------------
C:\>adb devices
List of devices attached
C:\>
---------------------------
---------- Post added at 11:31 PM ---------- Previous post was at 11:23 PM ----------
^when I say broken, I mean the whole screen is distorted, I cannot see anything
Click to expand...
Click to collapse
Reboot to recovery. Bam, working ADB. You can navigate there pretty easily. Pull battery, then re-insert. VOL + & PWR, two click on VOL -, PWR button once. You're in recovery now.

QtADB also can be used is this case
http://qtadb.wordpress.com/download/

paskalion said:
QtADB also can be used is this case
http://qtadb.wordpress.com/download/
Click to expand...
Click to collapse
No go on this either.
Downloaded QtADB, ran the .exe
Pointed to the folder with the aapt and adb binaries, program opened up
Phone's connected and on (I can hear texts coming through), hit refresh a few times, still not detecting

polobunny said:
Reboot to recovery. Bam, working ADB. You can navigate there pretty easily. Pull battery, then re-insert. VOL + & PWR, two click on VOL -, PWR button once. You're in recovery now.
Click to expand...
Click to collapse
That's a little tough. I'm using a Galaxy S so I'm following instructions for that, but it's hard to know if I'm in recovery mode or not. Since adb doesn't detect the device, it's hard to know whether the phone went into recovery mode, or whether adb is setup correctly. It would be handy for a voice sample to play "recovery mode" once the phone boots into it.

droidoidoid said:
That's a little tough. I'm using a Galaxy S so I'm following instructions for that, but it's hard to know if I'm in recovery mode or not. Since adb doesn't detect the device, it's hard to know whether the phone went into recovery mode, or whether adb is setup correctly. It would be handy for a voice sample to play "recovery mode" once the phone boots into it.
Click to expand...
Click to collapse
You're in the wrong forum, then.
And whether or not adb is installed properly, you would know in your device manager under Windows. Appears as a device.

polobunny said:
You're in the wrong forum, then.
And whether or not adb is installed properly, you would know in your device manager under Windows. Appears as a device.
Click to expand...
Click to collapse
Ok... Galaxy S i9000 stuff goes in the Galaxy S i9000 forum.... that's probably why my other post got deleted! :laugh:
As for adb... it appears as a process in task manager, so it's running - I know that much. It's not appearing as a device in device manager (why would it if it's a process? or are you referring to my phone appearing as a device?)
Only areas I can think of that aren't correct are the environment variable and the way I'm doing recovery mode. Since I can't see the screen, I don't know which one is causing the issue! :crying:

Samsung broken??
Contact this guy in Paris , he's very good and friendly!! he repairs my blue Galaxy S3 in front of me
Tel: 0950 850 500 Direct Technique
repare-galaxy com
don't hesitate to call them because i know their skills and it's very good!!
tell them that u call from Mike ciao guys!!

Problem!
Harbb said:
Code:
adb pull /sdcard .\sdcard
It looks a little confusing but don't stress. Just make sure you type it in exactly (dot, correct slash, etc). This will take a little while since it might transfer up to ~15GB worth. You'll see a new line with "C:\Nexus>" with a flashing cursor when it is done. Then you can view all the contents of your sdcard at C:\Nexus\sdcard and do with them as you please.
Click to expand...
Click to collapse
Hey, I got to this problem and I got stuck. I also have a Nexus S with a cracked screen. When I put in the final phrase into the command window it just told me that 0 filles were pulled! Why didnt it pull my files?
What I am trying to do is get all of my pictures and others off the phone.
Please help!

SkullMblem said:
Hey, I got to this problem and I got stuck. I also have a Nexus S with a cracked screen. When I put in the final phrase into the command window it just told me that 0 filles were pulled! Why didnt it pull my files?
What I am trying to do is get all of my pictures and others off the phone.
Please help!
Click to expand...
Click to collapse
This happened to me as well. You have to make sure that your phone has its sdcard folder mounted. Type "adb shell" to get access to the phones command terminal. Then type in "mount /sdcard" I think, or maybe it was "mount sdcard". Either way will probably work so long as you are in the root directory of the phone. You can navigate around in the phone just like a normal linux terminal. "ls" shows list of files and folders in the current directory, "cd foldername" moves into a folder, "cd ../" moves back, "cd /" goes to root directory, etc. Anyhow, once you have mounted the sdcard, you can type exit to leave the shell terminal, and then issue the command "adb pull /sdcard .\sdcard" to get the files. I had a custom rom image in the root of my sdcard so the move took quite a while ~15 minutes. On success of the pull command you should see a bunch of statuses like:
pull: sdcard/data/somefile -> .\sdcard/data/somefile
pull: sdcard/DCIM/somefile -> .\sdcard/DCIM/somefile
.
.
.
XXXX files pulled. 0 files skipped
(Some more transmission stats)
Hope it works out for who ever reads this.
Side note:
On my phone the screen was smashed. I replaced it and it still would not turn on, but it was still running. I had a rooted phone with CM10 rom on it. ADB debugging was one (if its off your pretty much screwed). I started up the phone, and plugged in the usb cable. I tried to use both adb and fastboot from windows terminal. "fastboot devices" would echo back nothing, and "adb devices" would echo back my phone's device number but state it was offline. So to get it online I did the following:
1.) pull batttery.
2.) boot into bootloader (hold power and volume up) the phone shouldn't vibrate if it does you have just normally powered it on. It took me quite a few times to get this to go into the bootloader. To make sure you get in the bootloader type "fastboot devices". If nothing comes up you not there.
3.) once verified you are in the bootloader you need to go into recover mode. Press volume down twice and then hit power (this would normally move the cursor on your phone down to recovery and select it if you could see whats happening on the screen).
4.) wait a bit for it to load into recovery, try typing "adb devices". You should eventually see you device show up as online. At this point you may enter the shell as above, mount the sdcard, exit the shell and pull your files.
Windows instuctions:
Prerequisites are installing adb.exe and fastboot.exe via installing the Android SDK on your computer. They will show up in the platform-tools folder of the install location. Add that folder to your environmental path variable so you can run the ADB and fastboot commands from any folder. Install the ADB driver for your phone (allows you to issue adb commands to your phone when USB is plugged in) by plugging in your phone and going to device manager, find your phone which should show up as a exclamation point, right click update driver, click "browse...", then "let me pick...", click top entry something like "show all", and then let the list populate. On the left look for "samsung" and then select the first one that is something like "samsung adb driver interface". And you should be good to go.
Sorry for the long winded post, I just like to try and explain as much as possible.

Successfully Recoverd data
Well My Samsung S2's Screen broke down few days ago.. Now i have retrieved the data by following the 2nd method in the following article..! I Hope this works for you aswell...
I can not Post the link here.. PM me if you want the link...!