ok, tried doing the official ota update about 2 days ago, but once it tried doing the update, my phone gets stuck at the (M) logo.
I cannot boot it up in anyway possible, and my battery is dead so i cant start it up while plugged in USB, but if its plugged into the wall itll start up and im able to get into boot loader etc...
ive tried putting a recovery img on root of sd card and applying as an update.zip file and getting an sdcard error status 7.
my phone was never rooted, all stock. any help>
power off your phone, plug it into wall charger and let it charge up. while its charging up download a 2.1 sbf,
SHOLS_U2_02.31.0_UCASHLSMR2EMEAB1B805C.0R_PDS003_USASHLS00RTEU_P042_A005_HWp2a_1FF.sbf.gz (google it)
Then download RSD Lite (google it)
Then when your phone is charged boot into bootloader (hold up on keyboard and press power button)
connect to pc via usb, open rsd lite, make sure phone shows up connected, load sbf you downloaded and press start and let it do its thing.
should bring you back to stock 2.1.
hope this helps
well thats the thing, ive let it sit plugged into a wallcharger for hours upon hours, the secon i plug it in, it turns on by itsself and sits at the moto M screen, and once i unplug it i cant do that.
i am able to get it to the screen where you can wipe/data factory reset, wipe cache, reboot and apply update.zip. if i had an update file, and i did a wipe and flashed it, would that fix it? because ive tried that, but idk if its the wrong file or what, but i get a sdcard error. like status 7 on the verification step
also on getting the batt charged, i noticed when plugged into a wall screen lights up with M logo. and when i plug into computer with usb, the white light next to charger lights up?
hi guys...
ask for help...im using starhub msxt720 ...my phone is rooted and after i install jit on my phone then my phone is reboot n stuck at starhub logo....cannot reach to moto logo ...i go to recovery and wipe cache and all the data , but now still stuck at the starhub logo...wat should i do ??..all master here i need ur help!!
samrozzi said:
i am able to get it to the screen where you can wipe/data factory reset, wipe cache, reboot and apply update.zip. if i had an update file, and i did a wipe and flashed it, would that fix it? because ive tried that, but idk if its the wrong file or what, but i get a sdcard error. like status 7 on the verification step
also on getting the batt charged, i noticed when plugged into a wall screen lights up with M logo. and when i plug into computer with usb, the white light next to charger lights up?
Click to expand...
Click to collapse
you don't run an update, u reflash the phone with rsd lite. choose the correct sbf for ur phone from here - http://and-developers.com/sbf:milestone?s[]=sbf, download it, extract it, flash it. make sure the battery has a full charge
.i want to reflash but rsd lite cannot detect my milestonext720...how ?..FYI b4 this i run adb on same pc...but it can run...all driver for motorola hav installed ..ill use rsd lite 4.5.3
well the problem is my phone wont charge, it wont charge in wall or usb, when i plug into wall phone auto starts and just sits at (M). idk if it charges in bootloader mode? or in recovery? not sure
samrozzi said:
well the problem is my phone wont charge, it wont charge in wall or usb, when i plug into wall phone auto starts and just sits at (M). idk if it charges in bootloader mode? or in recovery? not sure
Click to expand...
Click to collapse
I actually had this problem myself fairly recently. I was able to partially insert the plug into my phone until the LED turned on, but not far enough to where the Motorola logo turned on. It'll either try to fall out or plug further in, so I recommend placing it on a surface which won't have much disturbance.
After about an hour, you should have sufficient charge to mess around with the software and flash a new SBF by the bootloader, or reflash a backup through recovery. I wouldn't recommend leaving it plugged in too long like this, because it might not be very good for the phone's health.
samrozzi said:
well the problem is my phone wont charge, it wont charge in wall or usb, when i plug into wall phone auto starts and just sits at (M). idk if it charges in bootloader mode? or in recovery? not sure
Click to expand...
Click to collapse
umm .. what's about charging the battery with another phone or external charger and put it back to ur phone?
i have just the same issue ... i am sure that the battery is fully charged, cause ive charged it with another milestone ... but that one simply won't turn on ... tried different combinations of sd/simcard/battery on and off .. still the same ... Any help would be highly appreciated.
pull out the battery get back and push d-pad UP and power buttons before M logo came up. so you can flash a sbf file with rsd-lite._a
Related
Hey there,
Was on Dexter's Froyo 1.2b. Phone froze up, had to pull battery.
After pulling the battery, it won't reboot. Just stays on the Moto logo forever.
Will not go into recovery mode, but will go into bootloader.
Tried flashing a few different ROMs onto it with RSD, no luck.
Any thoughts?
Thanks!
Charles Angus said:
Hey there,
Was on Dexter's Froyo 1.2b. Phone froze up, had to pull battery.
After pulling the battery, it won't reboot. Just stays on the Moto logo forever.
Will not go into recovery mode, but will go into bootloader.
Tried flashing a few different ROMs onto it with RSD, no luck.
Any thoughts?
Thanks!
Click to expand...
Click to collapse
try this
remove your sdcard and just leave sim card in our phone and boot..wait for it ..if after 10 minutes moto logo still there..pull out your battery and put it back into phone
press power button , press the Vol + button for 30 seconds as soon as the Moto Logo shows up
if you see the recovery option select the wipe data/ factory reset option and then reboot..
I had exactly the same problem (and a few people too)
sorry...but you can't do anything!
I tried to flash my phone numerous time, and can't get into recovery!
only solution is to send phone to motorola service
PS. this is 100% connected with dexter's froyo...so it would be nice that we collect some info why is this happening on some phones......
pajo985 said:
I had exactly the same problem (and a few people too)
sorry...but you can't do anything!
I tried to flash my phone numerous time, and can't get into recovery!
only solution is to send phone to motorola service
PS. this is 100% connected with dexter's froyo...so it would be nice that we collect some info why is this happening on some phones......
Click to expand...
Click to collapse
Did you end up sending yours out to motorola service? Were they able to fix your phone? I think resar also had a similar problem. http://forum.xda-developers.com/showthread.php?t=821210 (before Dexter's ROM)
It is wrong that there is no way to deal with that problem. I also had it a few weeks ago.
Method 1: http://forum.xda-developers.com/showthread.php?t=892026
Method 2: Get a second battery that is charged up ( at least 40 % or so..) and then get into the bootloader and reflash your custom ROM.
Method 3: Charge up your phone ( do not connect it to PC ) with the wall charger. When the phone wants to boot automatically, pull out the battery and set it in again. When the phone tries again to boot, pull the battery out and set it in again. My XT720 wanted to boot after 5-10 minutes or so when it was charging up. You should do that until your phone has enough battery to get into the bootloader.
In my opinion the problem is that the battery does not charge up anyway?
It worked for me with a second battery that was charged up for 50 % and then I reflashed custom ROM with RSD Lite.
Just ask if you don't understand anything
Did you get into RSD Lite & bootloader mode?
Knoedelkopf said:
It is wrong that there is no way to deal with that problem. I also had it a few weeks ago.
Method 1: http://forum.xda-developers.com/showthread.php?t=892026
Method 2: Get a second battery that is charged ( at least 40 % or so..) and then get into the bootloader and reflash your custom ROM.
Method 3: Charge your phone ( do not connect it to PC ) with the wall charger. When the phone wants to boot automatically, pull out the battery and set it in again. When the phone tries again to boot, pull the battery out and set it in again. My XT720 wanted to boot after 5-10 minutes or so when it was charged up. You should do that until your phone has enough battery to get into the bootloader.
In my opinion the problem is that the phone does not charge anyway?
It worked for me with a second battery that was charged up for 50 % and then I reflashed custom ROM with RSD Lite.
Just keep asking questions if you don't understand anything
Did you get into RSD Lite & bootloader mode?
Click to expand...
Click to collapse
Interesting! So, the idea is that when battery power is too low the flash is either ineffective or perhaps disabled by some low-level hardware check? It does seem plausible. I hope I don't ever have to try this.
battery is not a problem (at least in my case)
I have original milestone which have the same battery as xt, so I always charged battery at 100%...
motorola did repair my phone, but now I am afraid of flashing 2.2 back, because it will surely stuck at M logo again (I tried it two times already )
PS. tried flashing ALL available flashes (even original korean 2.2), and nothing happened..
I just couldn't boot into recovery
So when you got into the bootloader mode, was there shown something like "battery low cannot program"?
Or what do you mean exactly with "I just couldn't boot into recovery "?
Knoedelkopf said:
So when you got into the bootloader mode, was there shown something like "battery low cannot program"?
Or what do you mean exactly with "I just couldn't boot into recovery "?
Click to expand...
Click to collapse
We tried everything we could to save pajo's phone but nothing worked. resar is also extremely knowledgeable and had to send the phone to Motorola for repair. Pajo's thread has been merged into this mega thread, unfortunately:
http://forum.xda-developers.com/showthread.php?t=962744&page=1
Mine bricked today also using Dexter 1.3. This was my replacement phone (other one had audio jack issue, hardware not software). My battery died and couldn't get it to reboot, would just cycle the moto logo then sometime the dex froyo logo. I'm flashing back to stock right now,then reverting ti 1.2b was a more stable build.
HTC One S S4 16 GB
what I did:
1. Unlocked Bootloader
2. installed cwm
3. rooted
4. made backup
5. Factory Reset / Wipe before
6. Flashed http://forum.xda-developers.com/showthread.php?t=1701314
which resulted into a black screen
7. Tried to use my back up---> no back up available
8. SD Card wont mount
9. Tried to put new rom via usb mount--->not possible
10. Tried to repair recovery via fastboot---> still not reading sd card
Situation now:
Now Battery is getting low and wont load anymore, only a red light is blinking for the first minutes when I try loading, so I cant get into Bootloader anymore.
What I am thinking to do:
Open HTC One S and load the Battery separately, then I hope to get into the Bootloader again.
Then I will try to lock the Bootloader and to use a ruu.
Is there anybody who had similar problems? Any suggestions?
Thanks to Everybody in advance!
Yeah, leave it charging for a couple of hours, then unplug the charger and try to boot into bootloader again.
Once inside bootloader, plug in the usb cable and fastboot flash the boot.img.
Goatshocker said:
Yeah, leave it charging for a couple of hours, then unplug the charger and try to boot into bootloader again.
Once inside bootloader, plug in the usb cable and fastboot flash the boot.img.
Click to expand...
Click to collapse
It has been loading for about 12 hours now, still it wont load the bootloader. So I am assuming that it is not able to charge the battery.
Still thank you for your answer.
So i recently got an atrix 2 that was preloaded with 4.0.4. I used a one click root method program to program it, and installed this recovery app, and tried to install mokee-rc4-july 14th on my phone. i managed to back up my data before hand but when i wiped the phone and installed the mokee all the phone kept doing was restarting. I have read about recovery mode but all I get when I press and hold the vol. down and power buttons is an oversimplified screen that looks like when I plug into the computer. The backup doesnt even freaking exist anymore on my sd card so I cant restore what was backed up.
AP fastboot flash mode (s)
0A.72
Battery LOW
Cannot Pogram
Connect USB
Data Cable
I did the wipe user data/cache, and ried to reboot but, it ether gets stuck on the red motorola boot screen or gets past that and the screen stays black and reboots over and over.. Please don't tell me I have to go through all that splicing cables n crap just to charge this battery. THERE is no way I CANNOT charge the battery? even with the phone off? How can I resolve this? this is an absolute nightmare. I'm not messing with this rooting/ custom rom stuff after this
You'll need to find a way to charge your battery. You can use someone else's phone or get an external charger of you don't want to do any wiring.
Brought to you but time and relative dimensions in space.
Sunaj1 said:
So i recently got an atrix 2 that was preloaded with 4.0.4. I used a one click root method program to program it, and installed this recovery app, and tried to install mokee-rc4-july 14th on my phone. i managed to back up my data before hand but when i wiped the phone and installed the mokee all the phone kept doing was restarting. I have read about recovery mode but all I get when I press and hold the vol. down and power buttons is an oversimplified screen that looks like when I plug into the computer. The backup doesnt even freaking exist anymore on my sd card so I cant restore what was backed up.
AP fastboot flash mode (s)
0A.72
Battery LOW
Cannot Pogram
Connect USB
Data Cable
I did the wipe user data/cache, and ried to reboot but, it ether gets stuck on the red motorola boot screen or gets past that and the screen stays black and reboots over and over.. Please don't tell me I have to go through all that splicing cables n crap just to charge this battery. THERE is no way I CANNOT charge the battery? even with the phone off? How can I resolve this? this is an absolute nightmare. I'm not messing with this rooting/ custom rom stuff after this
Click to expand...
Click to collapse
Hi,
You will have to find some other Atrix2 phone or some charger.
something like this one...
http://www.ebay.in/itm/1950mAh-Li-i...Mobile_Accessories&hash=item43b9b11f5c&_uhb=1
Or the macgyver method of hacking the wires and jumping straight to battery terminals.
Sent from my MB865 using Tapatalk 2
Hey guys, I´m new here,
and I have a problem with my Nexus 5.
Today, I took it out of my pocket, and it was turned off. I don´t know why, it charged over night,
So I tried to boot it normally, and it worked. But upon reaching the pin screen for the sim card, a message popped up: Power off, shutting down.
I tried some more time, with and without sim, on the charger, and without, I even resetet it to the factory setting through the bootloader.
All these attempts did not work. My phone is on stock, and it´s unrooted.
What can I try to get it working again?
Cheers,
Timo
My first guess is that the plug was not fully inserted into the socket on the phone so that it discharged all night to zero. When that happens, I've found that you need to plug in the charger and leave it alone for a half hour before you will see any sign that it is in fact charging.
PhilipTD said:
My first guess is that the plug was not fully inserted into the socket on the phone so that it discharged all night to zero. When that happens, I've found that you need to plug in the charger and leave it alone for a half hour before you will see any sign that it is in fact charging.
Click to expand...
Click to collapse
Thanks for the answer.
Had it at the charger for like 3-4 hours now, nothing changed...In the short time, I´m able to see the battery indicator it shows the battery on half load together with the sign that it´s loading.
Does the phone load on the bootloader screen?
Cheers,
Timo
Yup, the phone can charge even on bootloader.
Did you unlock the bootloader (and flashed a custom recovery) on the phone ? You should try to backup all data (recovery -> mount and storage -> mount usb, then connect to a comptuter using a usb cable) and to flash another rom/ fastboot and flash the original firmware
Charlus97 said:
Yup, the phone can charge even on bootloader.
Did you unlock the bootloader (and flashed a custom recovery) on the phone ? You should try to backup all data (recovery -> mount and storage -> mount usb, then connect to a comptuter using a usb cable) and to flash another rom/ fastboot and flash the original firmware
Click to expand...
Click to collapse
Nope, I did not unlock the bootloader. I will try to charge it at the bootloader over night, and I´ll see what happens.
Thanks,
Timo
Hi Guys,
my phone is dead and i have no clue what the issue is.
My S6 just turned off out of nowhere and can't be switched on anymore. It will only show the charge sign for a few seconds after plugin in and then stops/screen turns off. It can't be started at all.
I bought a new battery but don't think this is the problem. i haven't installed it yet, as something else might be broken.
The phone won't turn on when connected to the usb from the laptop, but i can get it into recovery mode as long as it is connected and install a new firmware.
If i unplug the usb in recovery mode, the phone switches off right away so that might be a power issue.
Once i install a new factory rom through Odin, the black/white Samsung boot screen comes on, then the blue installing screen that counts up the installation percentage, and then the phone turns off around 2-6% and says erasing. Then the phone is completely dead again and i can only get a screen picture by entering recovery mode.
What can it be? Any ideas/suggestions?
i attached some picture and a video of the start up in the .zip file, as i can't upload .mp4.
Thanks
Smiler51
I also don't have a boot-loop or something where the phone continuously reboots.
Maybe something related to the memory of the phone?
try flashing firmware with "NAND Erase All" under Options in Odin, this will wipe /data/ partition, if you get stuck in a blank screen reboot in recovery mode and perform a Factory reset to recreate/format the /data/ partition again.
Starnel said:
try flashing firmware with "NAND Erase All" under Options in Odin, this will wipe /data/ partition, if you get stuck in a blank screen reboot in recovery mode and perform a Factory reset to recreate/format the /data/ partition again.
Click to expand...
Click to collapse
Thanks a lot for that tip.
I tried that and the blue installing screen that counts up the installation percentage doesn't stop at 2-6%, but it stops at 26-32% now, then says erasing, reboots into the same blue installation screen and then turns off.
When i unplug the cable, the phone immediately turns off, so there must be some battery issue as well. Not sure if this is related in any way. I can't get into recovery when only running on battery without a USB cable connected.
Anymore ideas what i could try or it could be?
I think, that because of battery your phone died while flashing in Odin and that's why you can't flash anything now
kapiszon53 said:
I think, that because of battery your phone died while flashing in Odin and that's why you can't flash anything now
Click to expand...
Click to collapse
The phone is connected to the USB though. Wouldn't that provide enough juice to power the phone while flashing?
I can install the new battery i bought but if that is not the reason, i can't return it anymore.
Does the USB provide enough power when flashing?
smiler51 said:
Thanks a lot for that tip.
I tried that and the blue installing screen that counts up the installation percentage doesn't stop at 2-6%, but it stops at 26-32% now, then says erasing, reboots into the same blue installation screen and then turns off.
When i unplug the cable, the phone immediately turns off, so there must be some battery issue as well. Not sure if this is related in any way. I can't get into recovery when only running on battery without a USB cable connected.
Anymore ideas what i could try or it could be?
Click to expand...
Click to collapse
This is 99% a dead battery, try replacing it. If you have enough time to disconnect and connect to your Wall charger you could try that.
Usb is not enough to keep the phone on, neither charge the battery at the same time
Starnel said:
This is 99% a dead battery, try replacing it. If you have enough time to disconnect and connect to your Wall charger you could try that.
Usb is not enough to keep the phone on, neither charge the battery at the same time
Click to expand...
Click to collapse
I have installed the new battery.
It is working now... Wow, i didn't know that no charge in the battery will create such a problem
Thanks for the help!