I applied to all in one update.zip without flashing to stock (same ROM but rooted, settings.db etc). Upon reboot I had it do the 512mb ext4 lagfix and it wouldnt reboot(It got stuck at the Galaxy S screen) . When I tried to do a nandroid restore it kept failing at /sd-ext part and would never reboot. I decided then to try an Odin one click ROM...I started it and walked away and about a minute later my phone's screen was bright green and the power no longer worked. Battery removal and install..same thing...nothing..not a download screen, not a recovery screen..nothing. Is there ANY way anyone can think of to reset this puppy. I have it boxed up and ready to ship out for replacement but Id feel alot better being able to wipe it. I'm assuming that if I can't get it to even power up they wont be able to tell I rooted it. Just seeing if anyone has any ideas.
/edit #2
When pressing power up and power I get
RST_STAT =0x1
PWIC_IRQ1 =0x80
PWIC_IRQ2 = 0x0
PWIC IRQ3 = 0x1
PWIC_IRQ4 =0x0
PWIC_STATUS1 = 0x80
PWIC_STATUS2 = 0x0
text is orange with a small orange dot below it
Just curious if there was a way around this (doubting it) Have the same situation myself now.
Belaflek said:
I applied to all in one update.zip without flashing to stock (same ROM but rooted, settings.db etc). Upon reboot I had it do the 512mb ext4 lagfix and it wouldnt reboot(It got stuck at the Galaxy S screen) . When I tried to do a nandroid restore it kept failing at /sd-ext part and would never reboot. I decided then to try an Odin one click ROM...I started it and walked away and about a minute later my phone's screen was bright green and the power no longer worked. Battery removal and install..same thing...nothing..not a download screen, not a recovery screen..nothing. Is there ANY way anyone can think of to reset this puppy. I have it boxed up and ready to ship out for replacement but Id feel alot better being able to wipe it. I'm assuming that if I can't get it to even power up they wont be able to tell I rooted it. Just seeing if anyone has any ideas.
/edit #2
When pressing power up and power I get
RST_STAT =0x1
PWIC_IRQ1 =0x80
PWIC_IRQ2 = 0x0
PWIC IRQ3 = 0x1
PWIC_IRQ4 =0x0
PWIC_STATUS1 = 0x80
PWIC_STATUS2 = 0x0
text is orange with a small orange dot below it
Click to expand...
Click to collapse
Belaflek said:
I applied to all in one update.zip without flashing to stock (same ROM but rooted, settings.db etc). Upon reboot I had it do the 512mb ext4 lagfix and it wouldnt reboot(It got stuck at the Galaxy S screen) . When I tried to do a nandroid restore it kept failing at /sd-ext part and would never reboot. I decided then to try an Odin one click ROM...I started it and walked away and about a minute later my phone's screen was bright green and the power no longer worked. Battery removal and install..same thing...nothing..not a download screen, not a recovery screen..nothing. Is there ANY way anyone can think of to reset this puppy. I have it boxed up and ready to ship out for replacement but Id feel alot better being able to wipe it. I'm assuming that if I can't get it to even power up they wont be able to tell I rooted it. Just seeing if anyone has any ideas.
/edit #2
When pressing power up and power I get
RST_STAT =0x1
PWIC_IRQ1 =0x80
PWIC_IRQ2 = 0x0
PWIC IRQ3 = 0x1
PWIC_IRQ4 =0x0
PWIC_STATUS1 = 0x80
PWIC_STATUS2 = 0x0
text is orange with a small orange dot below it
Click to expand...
Click to collapse
when you are on that screen can you try adb reboot download? masterclear in odin one click?
what rom were you on to begin with out of curiosity?
well first off there is only ONE odin one click, and it doesnt have roms. it flashes ATT 2.1 only.
so you used odin3 flashing utility. I bricked last night. HARD BRICK
power NOTHING
2 button + USB NOTHING
3 button NOTHING
but my jig would work sometimes... about 1 out of 10 tries. with pulling the battery in between each time. just kept at it and it would come on once. so i tried again and again...
and only every 1 out of a bunch would work... kept pulling the battery, wait, put in, jig... repeat...
all good now..
Hard brick is "doesn't do ****" no nothing, regardless of what you try it shown absolutely no signs of life. If you get that, box it up, there isn't a damn thing you can do.
Anything else, meaning any life at all, use a jig, there's plenty of posts here if you try the search with just jig in it. You can build one for about a buck if you have a spare charge cable ( or even without ).
For those of you who have a legit "Hard Brick" as in youre phone does absolutely nothing - AdamOutler is looking for completely bricked phones to do some testing on. More info on page 2 of this thread.
http://forum.xda-developers.com/showthread.php?t=1020976&page=3
If you can help him out send him a PM, I know he'd appreciate it. And who knows he might be able to revive your dead cappy!
Sent from my beloved Cappy running Continuum 5 RC2
Reynaldinho111 said:
For those of you who have a legit "Hard Brick" as in youre phone does absolutely nothing - AdamOutler is looking for completely bricked phones to do some testing on. More info on page 2 of this thread.
http://forum.xda-developers.com/showthread.php?t=1020976&page=3
If you can help him out send him a PM, I know he'd appreciate it. And who knows he might be able to revive your dead cappy!
Sent from my beloved Cappy running Continuum 5 RC2
Click to expand...
Click to collapse
Mine's getting replaced under warranty, otherwise I would have been glad to help him out.
mobile tech videos is offering free jtag debricking for the first few too, because there is no guarantee still kinda testing. but if you are still able to sneak it into warranty.... and its real easy to, do it.
but i just half-hard bricked again tonight.
found a trick. if NOTHING turns on the screen. no buttons, no combos and trying jig. nothing
remove battery
count to 5
put battery back in
DO NOT TOUCH ANY BUTTONS!
put in jig.
if I touched ANY button the jig wouldnt work. screen would stay black
this is my experience over the past 2 nights.
when i figured out this trick, it worked EVERY TIME i wanted it to.
found this trick to work in my situation.
try.
Related
I know this had been posted all over this forum but I can't for the love of me find a way solve this. By phone won't boot, nothing comes up in the screen everything is black. This happened while trying to do the 3 button fix.
This is what I have tried so far:
All the possible combinations of buttons
Trying to get it to connect with adb on 3 different computers
Tried to see if the usb connection was read by the linux kernel
And nothing...
At this point the only thing I haven't tried is the Jig method that I will try tomorrow. Aside from this is there anything else before having to go to ATT and beg for a new one?
Thanks in advance
Additional Info:
I was running Serendipity 5.10 with the kernel included
Some people have had success getting back into download mode by removing the battery for 30 seconds to a minute then plugging in the USB cable, holding the volume buttons and (continuing to hold the buttons) inserting the battery.
opcow said:
Some people have had success getting back into download mode by removing the battery for 30 seconds to a minute then plugging in the USB cable, holding the volume buttons and (continuing to hold the buttons) inserting the battery.
Click to expand...
Click to collapse
My phone was soft bricked last night, this method above helped me get back into download mode. Good luck to the op!
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Drkstar81 said:
My phone was soft bricked last night, this method above helped me get back into download mode. Good luck to the op!
Click to expand...
Click to collapse
I had the same experience last week. Took several tries, but I finally got back in and flashed a new ROM onto it.
The three button fix requires you to flash a new sbl, right? Chances are pretty high that you permanently bricked your phone and a jig won't do you any good. If the jig doesn't work (and I don't expect it to), you have one of two choices: Buy a riff box and revive your phone by taking out the motherboard and connecting it to the riff box, or mail it back to Samsung and have them do it for you.
Note that using the riff box will definitely void your warranty and Samsung will be able to tell that you took it apart in the event that you eventually send it back to them. Custom roms and bricking supposedly void your warranty, but if you're clever enough over the phone, they'll be none the wiser. Especially in your situation, where the phone doesn't do anything when the power button is pressed.
Thanks to all for your help and will update this thread on what happens for future reference. The jig did not work so the next step is to go beg at an AT&T store for a new phone... Here goes nothing.
masterkoppa said:
Thanks to all for your help and will update this thread on what happens for future reference. The jig did not work so the next step is to go beg at an AT&T store for a new phone... Here goes nothing.
Click to expand...
Click to collapse
Just tell them the official 2.2 update did it. "My phone turned off by itself while I was trying to do the update through kies".
Also, if you deal with Samsung directly, they'll mail you back the same phone, so if you got one of the lucky ones with a functioning GPS, you might want to hang on to it by dealing with Samsung instead of ATT.
I took out the SIM, and battery for more than 30 seconds, enter recovery using 3 button mode, open ODIN, attach cable and flash to Eclair...worked fine. Installed SIM after everything worked.
As modest_android pointed out nothing at this point works. I managed to get a hold of AT&T yesterday and they'll send me a new phone overnight.
Thanks to everyone for their help.
A little background before I describe what brought me here to the forum for assistance. I had an SGS II (Telus - T959D) that I tried to upgrade...1st 3 Flashes went beautifully until I noticed that there was an ICS upgrade available...so I jumped on it...problem was the upgrade (while Odin said everything was right with the world) caused the phone to go into a permanent boot cycle (never going past the ICS flash screen). I took the phone into the local phone shop and they tried everything they could think of to reset or at least get it back into download mode...nada...zero zilch.
I then had a $600 paper weight. Luckily I still had my Motorola Milestone but I longed for my SGS back.
Yesterday I found an i9000 for sale. Already set up with ICS, running smooth and supposedly in mint condition...all this for $150. I got to the guys house who was just finishing wiping his personal data for me and reinstalling the Custom ROM ([ROM][MIUIv4][ICS][4.0.3][BETA8.1]drZMIUIv4- MULTI LANGUAGE[08/02/2012]).
I look at the phone...great condition...phone is cycling through the install and shows all the right partitions on the screen so I pay my money and walk out.
The phone never actually boots to an active screen and by the time I get the darn thing home it has gone completely dead.
Power button - NOTHING
3 button Download - NOTHING
3 button Recovery - NOTHING
battery pull 3 button Download - NOTHING
left charging all night - NOTHING
I tried to message the guy I bought if from and surprise, the 2 minutes it took him to respond to my offer to purchase has now gone 14 hours when the phone does not work.
I saw a post about a Brick Recovery option that involves ripping open the phone and soldering some jumpers...which I am fine to do...if there is some assurances that that will get the darn thing to at least boot up again.
Anyone who can help with this...my wife is none too happy right now...and in all honesty...neither am I. So I turn to the Android fellowship...HELP
Have you tried a two-dollar jig off eBay? Might be worth a shot before you go ripping her clothes off
Alternatively, you need to see AdamOutler's work
EDIT: Oh and for the price, if it's in good condition you got a good deal
But your phone was on and goes on?
If the phone turns on, its not bricked and there should a way to fix it.
Otherwise go to service point and tell them you don't know what happend, it doesn't work anymore...they should send it in and you get a worked one back.
Good luck.
archiv said:
But your phone was on and goes on?
If the phone turns on, its not bricked and there should a way to fix it.
Otherwise go to service point and tell them you don't know what happend, it doesn't work anymore...they should send it in and you get a worked one back.
Good luck.
Click to expand...
Click to collapse
Correct, but if you try the three-button combo and can't get into download mode, I think you need a jig
Jig no go
I had a jig from my last experience of bricked phone joy. Nothing.
I am thinking that the unbrickable mod is worth a shot...having a tough time finding magnet wire...not to keen on spending $20 on 3 spools when I need less than 1cm of wire.
[email protected] said:
I had a jig from my last experience of bricked phone joy. Nothing.
I am thinking that the unbrickable mod is worth a shot...having a tough time finding magnet wire...not to keen on spending $20 on 3 spools when I need less than 1cm of wire.
Click to expand...
Click to collapse
Someone in the i9000 forums may have some if you ask in the QnA section?
Sent from my Galaxy Note using XDA Premium
bricked sgs2
Hi,
I am with galaxy s2 I9100 on Lite'ning rom 3.6 and CF root kernel.
I flashed it with mobile odin pro.
Earlier I switched and tried to remove the yellow triangle by the method wit 1tar and 2tar and jig described by anonymous572 ("How to remove yellow triangle on any firmware with JIG") somewhere else in the xda. I did not see that this thread was about the Galaxy note and it said 'works on all ICS'...and missed the warning not to use it for sgs2. It worked indeed for the sgs2 to remove the yellow triangle.
But since then I can't enter clockworkmode, downloadmode and recovery mode anymore. Not via the buttons and not with the options in CWM manager and LRT toolbox and Odin Mobile Pro. I mean that I did not get any startup screen until after some minutes the lock screen.
Another reason could be that I restored backup via Titanium and also restored the system apps and data - which I know now I should not have done with a different new rom....
Last try was to start sgs2 with usb connected to PC and Odin activated. This worked and I could flash
according to the method as described in:
http://forum.xda-developers.com/showthread.php?t=1457458highlight=problems+with+recovery+modeed
I ticked re-partition and flashed the whole package including the pit file and this solved my problem.
(flashing without flashing the pit did not work).
After that I switched back to Lite'ning rom 3.6 and it's OK !
Jac
background info:
I am (or was) running MHX superlite 3.0 rom with romracers stockish 0.3 kernel.
UCLA3 modem and radio.
So today my phone decides to restart itself and never will load past the "first two"
samsung screens.
Once these "two" samsung logos pass by, the screen turns blank (not on)
and starts to vibrate with 1 second intervals.
The only way for it to stop is if I pull the battery.
Heres the weird part.
I tried to ODIN back to stock...once I put my phone into DOWNLOAD MODE.
The little android guy that says DOWNLOADING "dont turn off" will show for a millisecond and then the screen will shut off and start the vibrations. ODIN will not recognize the device either
So what I have is a phone that wont load past the samsung logos if the power button is pressed
AND
Download mode works, but the screen will turn blank and vibrations start buzzing.
My phone is having seizures. The only way to stop the vibrations is by pulling the battery.
I have accepted the fact that the phone may be done for.
It was a great 4 months together. tear*
Well, if you can't get it sorted out there's always this! Unless the hardware is busted, but maybe he can fix that too??
http://www.youtube.com/watch?v=AkJQAbwZjRk
Did you try booting into recovery mode instead of odin?
Is that an overclock kernel? If so sounds like may be set to high. And did u choose set on boot.
silver03wrx said:
Is that an overclock kernel? If so sounds like may be set to high. And did u choose set on boot.
Click to expand...
Click to collapse
No, its not. Can't OC or UV. It can only UC.
Sent from SKYROCKET
NexusMod 4.0
Romracer 0.3
if u can boot into cwm flash darkside
OP... what rom/kernel/modem were you running before MHX-SuperLite? and what wipe process did you use prior to MHX flash?
Can you get into recovery and restore a backup?
If you don't have a backup and can get into recovery, try wiping data/cache, then go into mounts/storage and format system, data, and cache, then go to advanced and wipe Dalvic cache. Then power down and try to Odin back to stock again.
If this doesn't work, try another data cable or usb port on your machine (or another pc if this doesn't work). Maybe communication is getting lost due to bad usb connection...
EDIT: Are you saying you tried to Odin even though Odin wasn't recognizing your phone? That could be part of the problem. Try re-installing the Samsung drivers and see if Odin sees it then.
If you can get into download mode you aren't hard bricked yet...
I think he is saying that Odin recognizes his phone but his phone goes black before he can't start the reflash right?
Sent from my SAMSUNG-SGH-I727
Did we lose the OP'r? I was just getting ready to flash this ROM (MHX) but Jooosty has thrown up a curveball. Hope you get it resolved.
Okay sorry for late response.
But i was running skyice speed before hand.
Ive only used CWM to wipe data.
No OC or UV on this kernel.
Cant get into cwm or recovery. The screen turns blank before i can do anything at all.
Ive concluded its most likely a internal hardware failure maybe...
Going to try to sell for parts
DoctorQMM said:
Did we lose the OP'r? I was just getting ready to flash this ROM (MHX) but Jooosty has thrown up a curveball. Hope you get it resolved.
Click to expand...
Click to collapse
MHX is great. The rom has nothing to do with it i believe
Jooosty said:
Okay sorry for late response.
But i was running skyice speed before hand.
Ive only used CWM to wipe data.
No OC or UV on this kernel.
Cant get into cwm or recovery. The screen turns blank before i can do anything at all.
Ive concluded its most likely a internal hardware failure maybe...
Going to try to sell for parts
Click to expand...
Click to collapse
I wouldn't give up just yet. I have never seen an instance of a hard brick where you could get into download mode. Try using Odin from another machine (preferably not a laptop).
If it's internal hardware failure then you have a defective product that is covered under warranty. Call support and get them to replace it (as a last resort of course--I honestly think you'll be able to get Odin to work if the drivers are properly installed and you have a solid usb connection).
EDIT: If you insist on selling it, please pm me so I can make an offer!
skrambled said:
I wouldn't give up just yet. I have never seen an instance of a hard brick where you could get into download mode. Try using Odin from another machine (preferably not a laptop).
If it's internal hardware failure then you have a defective product that is covered under warranty. Call support and get them to replace it (as a last resort of course--I honestly think you'll be able to get Odin to work if the drivers are properly installed and you have a solid usb connection).
EDIT: If you insist on selling it, please pm me so I can make an offer!
Click to expand...
Click to collapse
He already said Odin/connection isn't the problem. His phone won't stay on long enough for the communication to be made. According to what he said, it has nothing to do with machine/drivers/cable. He needs a way of keep the phone on long enough to make the connection, or somehow communicate with it another way. Unfortunately, I have no ideas. Although, I really hope someone does. That RussianBear guy seems to be onto something with communicating with the emmc without the phone being on... or something like that.
heres a link to a video update!
http://imageshack.us/photo/my-images/254/oww.mp4/
Jooosty said:
heres a link to a video update!
http://imageshack.us/photo/my-images/254/oww.mp4/
Click to expand...
Click to collapse
Man that is so weird. Random, but have you tried leaving it plugged in and charging for a few hours? Haha I just can't think of anything else.
plwalsh88 said:
Man that is so weird. Random, but have you tried leaving it plugged in and charging for a few hours? Haha I just can't think of anything else.
Click to expand...
Click to collapse
Or even a external battery charger maybe there is just enough juice to turn on and then dies
Sent from my SAMSUNG-SGH-I727
The battery is fine. Wouldnt keep rebooting if otherwise. O well.
Just bought a captivate to feed my android in me
Sent from my SAMSUNG-SGH-I897 using XDA
DUDE!!!! mine just started doing the EXACT same issue....SOB....
no cwm, no download, just reboots...i acn see cwm lettering for like 0.1ms then it reboots, and reboots every second...download mode, as soon as I choose continue, it goes into reboot loop.....
this is exactly what happened when it happened to my phone......
I went to hit the power button to lock the screen, was listening ot music on power amp. instead of screen locking, the power menu came up...hit back, and tried ot lock screen again? screen went black, 2 vibrates back to back....then saw sgh-i727r boot logo, then black and 1 second vibrate intervals.....
got it sitting in rice right now in case it got wet...battery litmus paper is good...only thing it may have gotten warm today, was working outside and it was 26° celcius....
I did drop it about 1.5 months ago and changed my screen about 3 weeks ago...unfortunately I broke the old lcd when removing the screen, I guess I didn't heat the glue enough...so I can't pop it back in and test to see if related...
I may take apart my phone in a bit and see if any liquid has leaked in...but I didn't get wet....
i think i'm going to order a gt-i9100 again, as I miss that phone.....
xtechx said:
DUDE!!!! mine just started doing the EXACT same issue....SOB....
no cwm, no download, just reboots...i acn see cwm lettering for like 0.1ms then it reboots, and reboots every second...download mode, as soon as I choose continue, it goes into reboot loop.....
this is exactly what happened when it happened to my phone......
I went to hit the power button to lock the screen, was listening ot music on power amp. instead of screen locking, the power menu came up...hit back, and tried ot lock screen again? screen went black, 2 vibrates back to back....then saw sgh-i727r boot logo, then black and 1 second vibrate intervals.....
got it sitting in rice right now in case it got wet...battery litinus paper is good...only thing it may have gotten warm today, was working outside and it was 26° celcius....
I did drop it about 1.5 months ago and changed my screen about 3 weeks ago...unfortunately I broke the old lcd when removing the screen, I guess I didn't heat the glue enough...so I can't pop it back in and test to see if related...
I may take apart my phone in a bit and see if any liquid has leaked in...but I didn't get wet....
i think i'm going to order a gt-i9100 again, as I miss that phone.....
Click to expand...
Click to collapse
What ROM were you on man?
Sent from SKYROCKET
NexusMod 4.0
Faux 010m
how do all.... nexus s I9023
i have just purchased a some what lovely google nexus s I9023
working fine for an hour or so...
i had a little pop up asking me to update...
i thought OK... sure why not...
having done so phone worked fine for an additional 20 mins...
then phone froze... i took the battery out and started it up again...
it froze on GOOGLE screen...
iv trawled every forum possible since this has happened...
now the PHONE WILL NOT EVEN TURN ON...
the phone is completely stock no mods or addon's to it!
im at the end of my tether.. SOME ONE PLEASE HELP!!!!!!!!
Hold volume up + power after reinserting the battery and putting it on charge. Do you enter bootloader mode? And what happens if you click recovery?
done the hold volume up and press power...
still no joy unresponsive!!
when it does work after 50 attempts of taking the battery out and putting it back in and doing volume and power
it turns on.. scroll to recovery.. it turns off google screen pops on...
then a Green android lying on his back appears with its stomach open showing white blocks and a explanation mark above it!
IM PUZZLED!!!!!
it then resets it self going back to being unresponsive!!
HELP!!!!
Give this a shot.
Also, could it be a power button issue? And that android screen is the splash for stock recovery. You have to press vol. up + power again to get past it, beyond this you can do a factory reset and similar magic. However you likely don't want this, and on the screen where you chose to enter recovery, you'll likely want to use fastboot to unlock the phone (which will wipe all personal data) and then flash a stock ROM again. At this point i would advise lots and lots of reading.
If it's less than a year old, i would be calling samsung though. If it is a new phone i would definitely do this first. Do not unlock unless you have no chance of going through warranty. Will need to know the exact status of the phone for best advice here.
I have done hours of searches and can't find the answer to my problem. Hopefully someone here can help.
My GT-N8013 is stuck in the Samsung Galaxy Note 10.1 logo screen. I can't even turn it off without it bringing this screen right back up. It only goes dead when I unplug it and let the battery run out of juice.
I can get it to restart into Odin Download mode, but not into the recovery mode. I can install roms and CWM and stock roms using both Kies and desktop Odin3, and I get "pass" status with no errors, most the time, when I do rom update, but I can't get to the restore screen with the power + volume up button, then releasing the power button and holding down the volume up button only. It just stays on the Logo screen.
I hold down the power + Volume down button and it will restart into the Warning screen that allows me to hit the volume down to go to the download screen or volume up to cancel and restart. Both the volume up and down buttons work for this action so I'm sure the buttons are working okay.
I thought maybe the battery wasn't charging right and that was preventing it from going into recovery mode, but I can charge it for a while and unplug it and the screen will stay on the logo screen for a long time, so I think the battery is okey.
Samsung just said I should send it in, but it is out of warranty and I don't want to put much more money into this devices since it is old and a new version is out now, but I hate to think a great device like this that worked so well for so long is now going to be worthless because I can't figure out how to fix it. Hardware seams to be working fine and just a few days ago, the software was working fine. I'm so confused.
Leading up to these events, I had it turned off for a few weeks because I was traveling and going on airplanes and never ended up using it on the trips so it remained turned off. When I turned it back on, there was a OTA system update that I wasn't sure what it did. Didn't appear to do anything noticeable. Still worked normal. Then a few days later I did a personal data wipe because I was going to sell it and get the new Note 10.1. I went through the new setup process without problems, everything was fine. I sold it to a guy and a day later he contacts me and says it isn't working properly and I've been dealing with this ever since. It didn't appear to have any physical damage and the custom binary download count was at "No" so I don't think he tried to load any custom roms. I don't think this guy is tech savvy enough to do anything but plug it in and use it normal, so I don't suspect foul play.
Any help would be greatly appreciated. Thanks.
Check this
http://forum.xda-developers.com/showthread.php?t=2477626
Sent from my GT-N8013 using Tapatalk HD
I have the exact same symptoms. (No recovery mode / stuck on boot screen even after fresh stock rom installed). Out of the blue after working fine the day before.
Anyone know:
a) of anything further that I can try to resurrect this
b) if I might still have any joy getting warranty service from the shop I bought it from in the UK / Samsung if they send it back to them. I have more than a year left on the 2-year warranty they provided, and have only ever run/attempted to run stock. However as I have been out of the UK my custom binary count has increased to 7 as I have tried to reinstall Stock Roms myself to fix the problem. (However OS version still shows as Samsung Official, not custom)
Thanks so much if anyone can help me
Custom binary 7 = warranty void .
I would try flashing Philz recovery tar through Odin and try recovery mode .