[Q] Using A2SD on Eclair - Android Software/Hacking General [Developers Only]

I've been wondering this for a while but can't find anything on the forums about it.
Does A2SD have to be installed as part of a ROM or as an update.zip? Can it not be installed as an APK at all?

*bump*
Anyone?

Related

[ROM][MyTouch3G / 32B] Android 1.6 App Pak (Donut) Powered by CyanogenMod v4.1.11.1

This Rom is CyanogenMod v4.1.11.1
See thread here: http://forum.xda-developers.com/showthread.php?t=539744
I've not had much time to Do much to this rom, But Calendar is working now for me ( Was getting error's ).
Change log will follow when I get more time to play with it.
as always, Be sure to thank Cyanogen if you enjoy this Rom.
Now, If you encounter an issue with the Flipclock widget, Don't delete!!!
Just reboot the Phone & it will load correctly, same for other widgets as well.
Android 1.6 App Pak Rom:
http://www.4shared.com/file/134205901/bb9ecd83/android16.html
Is this rom for 32B devices?
should work fine.
Rom works fine-verry good job
Thank's eugene373&Cyanogen.
I was able to update from CM-4.0.4 without much difficulty, but now getting FC error when trying to switch from Android keyboard to Touch Input:
(process com.htc.android.htcime)
I am googling to see if there are known issues, but will mess with it some more. The new Market is pretty slick.
Thanks.
Edit: Just realized this isn't a thread for 4.1.11.1 itself.
atleastzero said:
I was able to update from CM-4.0.4 without much difficulty, but now getting FC error when trying to switch from Android keyboard to Touch Input:
(process com.htc.android.htcime)
I am googling to see if there are known issues, but will mess with it some more. The new Market is pretty slick.
Thanks.
Edit: Just realized this isn't a thread for 4.1.11.1 itself.
Click to expand...
Click to collapse
I had this issue as well. You need to actually unzip the CM-4.1.11.1 ROM and locate the HTC-IME.apk and install. This HTC keyboard will then work after using this .apk
mightykc said:
I had this issue as well. You need to actually unzip the CM-4.1.11.1 ROM and locate the HTC-IME.apk and install. This HTC keyboard will then work after using this .apk
Click to expand...
Click to collapse
Ah, the one I tried to install was the HTC-IME.apk from the CM-4.0.4 stable ROM, and also the one from the SDK. I may try the one from 4.1.11.1 a little later, but when I tried the other two, it kept saying it would replace a file that already exists. I tried uninstalling using AppManager, but whenever I opened AppManager it would just load and load and not actually show me what was installed. After switching back to CM-4.0.4, AppManager and the HTC-IME work fine.
I'll try again with the 4.1.11.1 ROM and the HTC-IME.apk from the 4.1.11.1 ZIP and post back with my results.
EDIT: I am still having trouble with AppManager, but at this point I could care less about that. I did get 4.1.11.1 installed again, and got the HTC_IME to work using this thread:
http://forum.xda-developers.com/showthread.php?t=558134
Is the App Manager no working in this build? Please post issues regarding this Rom in Cyanogen thread if you are using his Build.
If using mine Please Let me know and I'll try and get it Fixed for you.
keep getting bootloops when i flashed this HELP HELP!!!
sxmdl6 said:
keep getting bootloops when i flashed this HELP HELP!!!
Click to expand...
Click to collapse
That's Really Odd, Did you Format you Fat32 ext2 /3 Partition.
Be sure to do this, Wipe, Flash. Reboot & Format is my Rule of thumb.
oh the only thing ive done was wipe and flashed my bad lol
Fast, seems stable.. Appmanager doesnt work with 1.6! Very Nice. Have to download the apppack next. Great work, keep it up!!!
I've tried everything still getting bootloops
Sorry I don't understand, what's the difference between this and cyanogen's own release?
I've been running 4.1.11.1 (with enochx theme) for the last few days and it is by far the best ROM out. Who needs Hero bloatware when this is available?
Well if you would have downloaded it you would have saw the Apps.
I Reverted the Calendar to an older build as I got FC.
As for now, I've not had time to do much to it.
donut
dude, can i port this rom using cyanogen port update?
limkoksoon said:
dude, can i port this rom using cyanogen port update?
Click to expand...
Click to collapse
sure, knock your self out.
as Cyanogen is the owner of the rom
eugene373 said:
sure, knock your self out.
as Cyanogen is the owner of the rom
Click to expand...
Click to collapse
dude, i tried wipe and apply android 1.6 and apply rad-4.1.11.1-kernel.zip.
but it can't load. now using cynogen 4.1.11.1 exp rom everythg seem fine but the end key can't be relocate as home key.. too bad...
so any help for this rom? or can someone pls port it to 32A?
limkoksoon said:
dude, i tried wipe and apply android 1.6 and apply rad-4.1.11.1-kernel.zip.
but it can't load. now using cynogen 4.1.11.1 exp rom everythg seem fine but the end key can't be relocate as home key.. too bad...
so any help for this rom? or can someone pls port it to 32A?
Click to expand...
Click to collapse
Didn't say it was for 32a, I've really not had time to play with it, Just repacked it with tons of apps.
Any problem switching to this from JACxROM 1.4r3?
I have a2sd, partitions and compcache enabled, will everything run just fine? I'm asking because I found somewhere in the xROM post to be careful when using a2sd from other sources...
http://forum.xda-developers.com/showthread.php?t=543621
Two lines y bold red
I really wanted to try Cyanogen since a long ago, but the search box in Donut just sold me!

[Q] DSPManager for Oxygen Froyo 1.0.4

Hey guys, has anyone gotten DSPManager to work properly with Oxygen Froyo v1.0.4 rom? I've been trying for a few nights, either flashing with clockworkmod or installing different versions of it via a file explorer but to no avail..
just giving this a bump..
Probably frowned upon but one last bump..

[Q] SR 3.5 Ginbread Keyboard script - edify

Does anyone know if the script that fixes the keyboard in SkyRaider 3.5 has been converted to edify? It will not run currently in clockwork 3.0+. And I am not a programmer, but I could try and figure it out, but I was wondering if someone else had already done it/found it. I searched but couldn't find anything substantial.
Thanks in advance!
Forum is
http://forum.xda-developers.com/showthread.php?t=764787
I am referring to
from thread said:
Gingerbread keyboard has the & and < messed up in the symbols. Flash this to fix it: http://goo.gl/Cf8ix
Click to expand...
Click to collapse
bump. anyone?

[Q] Does pre-installed Swype APK work on CM7/9 ROMS?

I'm just asking because since rooting and trying out CM7 and EB 2.3.7 last fall I have been using the Swype beta as mentioned.
Now that I've learned a bit more about how these devices and their ROMS work, I was just curious if anyone knows if the preinstalled Swype will work on a CM7-based ROM.
The reason I ask is that I'm getting sick of the bar for word suggestions in the Swype beta always staying there even after you've selected a word. I have all word-suggestion related settings disabled but it doesn't go away and the original version didn't leave it up.
Guess worst-case I could just use Titanium backup to backup and delete the beta, then pull the original version off my first backup of the OTA 2.3.3 update ROM and install it on EB 2.3.7 right?
not sure if the original will work but ive been using swype from here.. V5 beta not for galaxy nexus... some pretty cool ones and ive had no problems with it.
http://jbthemes.com/djdarkknight/daswypethemes/
Theres a swipe restore apk out there that will install the original Swipe as long as you have your original backup on your phone
Sent from my LG-P999 using XDA App
Yes, you just need the original .apk and the libSwypeCore.so file
wewoapsiak said:
Yes, you just need the original .apk and the libSwypeCore.so file
Click to expand...
Click to collapse
Thank you!!
*edit found it*
libSwypeCore.2.29.71.20750.so found under sysem.ext3.tar under \system\lib
just in case anyone was wondering - this works just fine in ICS - yay no more bloody suggestion bar!

How can I install a kernel ive pulled from a rom?

im running stock rooted and deodexed vrbmf1 and id like to install a stock kernel I pulled from a rom to allow custom bootanimations but im not sure where to place the files in the system and if I should delete anything from existing kernel so if anyone can help me out thqtd be great I did some searching and couldnt find anything relevant to my goal thanks in advance
Sent from my SCH-I535 using xda premium

Categories

Resources