Just installed the latest update(blah) and now Busybox isn't installing correctly. I'm running Evio rom, anyone else with this problem?
Amco said:
Just installed the latest update(blah) and now Busybox isn't installing correctly. I'm running Evio rom, anyone else with this problem?
Click to expand...
Click to collapse
I had a problem with not all the commands showing up. So I reverted back to the previous version. However, I have seen a lot of people with installation problems. Im on CM6.
Related
Hey guys, ran into a problem, I was able to root mytouch 3g and installed
http://forum.xda-developers.com/showthread.php?t=538633 3.6.8 release 4. Problem is when the phone goes sleepmode (screen turns black) after you wake it up the screen turns fuzzy/blurry. Is there an easy solution to this problem? or should I install a different ROM? Any suggestions? I really like this rom besides the blurry screen issue.
thanks for any help!
Hey same thing is happening to me...I wiped and reflashed but still having the problem
This is a problem many of us has encountered, I don't know why, try other ROM's I have found 1 that works for me.
I think it's a issue with the refresh rate of the screen.
Ditto. I have this problem as well with Cyanogen v4.0.1.
I've done the customary wipe prior to installing the ROM but the problem is the same.
This is the ROM I am using at the moment with no blurry screen problem.
http://forum.xda-developers.com/showthread.php?t=549755
i'm not using cyanogen but i am experiencing this issue with ZeroXd's Casper-4.2r2. i'm going to wipe the phone again and start over. So far, the Casper ROM is the only one that won't work for me and it was working well too
I'm having the same issue, but have ONLY noticed it with HERO-based roms. The Cyanogen 4.0.1 rom looked/worked fine.
Interested in the "fix" here...
Screen turns blurry
I am having the same issue but ONLY with the Hero roms. Cyanogen's new 4.xx roms are the frackin bomb so I'm not too sad. They work great for me. Definately want to know how to fix the issue though.
alot of ppl have this problem most of hero roms there is no fix yet sucks i know
yipcanjo said:
I'm having the same issue, but have ONLY noticed it with HERO-based roms. The Cyanogen 4.0.1 rom looked/worked fine.
Interested in the "fix" here...
Click to expand...
Click to collapse
what fix >?
Just experienced it for the first time after installing Drizzy's NoName V3. Have installed 10-15 roms prior and never experienced it until now. Trying out another Hero rom at the moment, will let ya know.
Update: QTek's rom seem's to work alright for me without the blur.
format sd card
seems to fix the problem....at least it did for me...
korndub said:
seems to fix the problem....at least it did for me...
Click to expand...
Click to collapse
The v3 noname I tried was on a newly partitioned/formatted sd card. :-\ QTek's is still going strong though. With the v3, after the first sleep it was blurry. I've been running QTek's for about 30-45 minutes now and no issues.
+1 to this issue. i had the same problem with some cyanogen ports in the sapphire thread, but using new cyan roms has not given me any issues. also noted that formatting does not help.
possibly an issue with engineering SPL?
i also noticed that a rom would flash fine, but as soon as my screen would lock thats when the issue would occur.
i wonder if it is a kernel / spl incompatibility. I had this same issue with JACxROM that runs great on and ION and is bassically the same phone. So I am a little confused. I am going to try and use Cyanogens newest 4.0.1 build and copy the boot.img to a JACxROM v1.3 and see if it does the same thing or not. Will report back to let you know what happened.
I have tried to use following HERO ROMs but they all turns blurry after sleep mode (when I unlock screen by pressing menu or similar button)
Champion v2, Fullv2 No Name, Superlite Hero etc.
Installed on myTouch 3g after rooting it using one click.
arunchowdhary said:
Installed on myTouch 3g after rooting it using one click.
Click to expand...
Click to collapse
Is this possibly *part* of the issue here? I'm using the "1 click" root method as well. Also, my SD card does have the proper 3 partitions, if that means anything.
Just installed the JACxHEROskiv1.4 ROM, which does not appear to exhibit this behavior. Nice ROM so far!
yipcanjo said:
Is this possibly *part* of the issue here? I'm using the "1 click" root method as well. Also, my SD card does have the proper 3 partitions, if that means anything.
Click to expand...
Click to collapse
I used the gold card method to root and I am experiencing the same thing with all the HERO roms. When you try to reinstall Cyanogens ROM's afterwards you experience the same thing. Only way I found to fix it was to format the SD card.
:/
We really need a fix for this. I am dying to use some Hero ROM's.
Well I fixed mine, I clean wiped everything and installed the cyanogen 4.0.1 rom. All is good now. I haven't messed with Hero, but I am liking the new cyanogen rom and he fixed the screen problem as well.
timafey said:
Well I fixed mine, I clean wiped everything and installed the cyanogen 4.0.1 rom. All is good now. I haven't messed with Hero, but I am liking the new cyanogen rom and he fixed the screen problem as well.
Click to expand...
Click to collapse
how did you go about clean wiping everything? I went ahead and bought a brand new sd card just to see if a fresh sd card cures it as well.
As a new poster I'm not allowed to post in the Bamf 1.5 Remix thread.
Just flashed BAMF 1.5 Remix and the radio update. 4G is working, and everything else that I can see so far, BUT Wifi won't enable. Under WiFi in the Wireless and network settings, it simply says "error."
Anyone having this issue?
Thanks
Everything running perfectly on normal BAMF 1.5 WITH NEW RADIO
MONKY_1 said:
Everything running perfectly on normal BAMF 1.5 WITH NEW RADIO
Click to expand...
Click to collapse
+1. No issue on my end.
My wifi is also working fine, but my email is acting a little screwy.
No issues here but when I do have issues like that I usually re-download, re-wipe, and re-install even thought its a pain
Sent from my ADR6400L using XDA App
t_roll said:
As a new poster I'm not allowed to post in the Bamf 1.5 Remix thread.
Just flashed BAMF 1.5 Remix and the radio update. 4G is working, and everything else that I can see so far, BUT Wifi won't enable. Under WiFi in the Wireless and network settings, it simply says "error."
Anyone having this issue?
Thanks
Click to expand...
Click to collapse
I have received that error before but it was kernel related. You might want to flash a different kernel and see if that fixes your issue.
Did you wipe data/cache ?
I would do a Titanium Backup and then wipe data/cache, first.
Then before you restore your Titanium Backup, check and see if your WiFi is working. If so, it's not the ROM or kernel, but rather something else.
m.
bp328i said:
I have received that error before but it was kernel related. You might want to flash a different kernel and see if that fixes your issue.
Click to expand...
Click to collapse
+1
Most kernels include some kind of modified wifi driver (and other) files that goes in the /system/library folders.
Reverting or flashing a different kernel that doesn't replace them will cause issues.
I don't use BAMF and haven't flashed the new leaked radio or firmware yet, but this is a common problem for kernel flashers.
Flash or reflash a BAMF compatible kernel and see if that fixes it.
No probs here!
Sent by my ThumperBolt
Thanks very much for the suggestions, guys.
I flashed an older kernel and the WiFi is good as of now.
I was looking forward to using the new BAMF 4.4.2 kernel, but I guess it will take some more tinkering on my part.
P.S. On first install I did wipe, flash and repeat.
I tried to update hosts file with the most current one using sgs tools like I always to do. I just loaded infused 2.2.3 today, it gives me an error that busybox is not installed. I tried installing from the market and it tells me that 2 versions are on the system. I tried running the update again and it still says busybox is not installed. I know it works on the infuse because I ran it on the stock rom all the time. Has anyone else had problems with busybox on an infused rom?
indigox3 said:
I tried to update hosts file with the most current one using sgs tools like I always to do. I just loaded infused 2.2.3 today, it gives me an error that busybox is not installed. I tried installing from the market and it tells me that 2 versions are on the system. I tried running the update again and it still says busybox is not installed. I know it works on the infuse because I ran it on the stock rom all the time. Has anyone else had problems with busybox on an infused rom?
Click to expand...
Click to collapse
Not since the early v2 betas - some had a bad busybox install, but not any recent version.
Does logcat give any more details?
help
Im running 2.2.3 and when ever some one calls it just skips the answer screen and says missed call but i can make phone calls without trouble
hrod1231 said:
Im running 2.2.3 and when ever some one calls it just skips the answer screen and says missed call but i can make phone calls without trouble
Click to expand...
Click to collapse
Try a clean flash.
I'm having some trouble running the Reaper Rom. My phone is S-OFFed with revolutionary and using Hboot: 0.98.2000. I have been able to succesfully install the MIUI ICS ROM and CM7.
I have formatted and wiped everything from 4EXT recovery and then installed the latest Reaper 2.1. During the first boot it freezes at the ROM loading screen. After about 20 minutes it reboots and this time loads the ROM but then freezes again after about a minute. This then continues in a loop.
Has anyone else experienced similar problems and has any ideas about how I could fix this?
Thanks for any help.
Does this happen each time you clean instal it or just the once?
Possibly try to re-download it again in case you have bad download
Swyped from my Desire S using XDA Premium
I've tried installing it a few times and always the same problem. The MD5SUM value is correct for the download but is there still a chance it could be bad.
I also tried installing an earlier version Reaper 2.0 but had the same problem with that.
Could it be a specific incompatibilty between something on my phone and Reaper since the other ROMs I've tried all work OK?
rajamuffin said:
I've tried installing it a few times and always the same problem. The MD5SUM value is correct for the download but is there still a chance it could be bad.
I also tried installing an earlier version Reaper 2.0 but had the same problem with that.
Could it be a specific incompatibilty between something on my phone and Reaper since the other ROMs I've tried all work OK?
Click to expand...
Click to collapse
No, your phone probably can't handle the default voltage settings. Search my posts on the reaper thread for a "stability patch" I posted for a early version. You're the third person with this problem.
Cheers
Sent from my HTC Desire S using xda premium
Thanks for the advice, I'll try it tonight. Hopefully it will work since it seems like a graet ROM.
Thanks lowveld, the stability patch worked perfectly.
Hi everyone,
I have the GS3 and I am currently running the newest Galaxy Mod ROM by Pure. As soon as I ran the v6 supercharger script, for some reason. I can no longer download market apps via WiFi. They work fine over 4g and I can download everything else via WiFi but specifically market apps say "downloading" but never make any progress. Now for the strangest part, I have even wiped data/cache, flashed 2 different ROMs, etc but still have the same issue. I'm a ROM flashing addict and this is my 4th rooted phone so I'm not new to this but I've never seen this issue before. Any help would be much appreciated. Thanks in advance!