I flashed Energy Rom to my Touch Pro first. After this I flashed another rom and everything was fine. Then I flashed back to Energy Rom and now my touch screen didn´t respond to touch.... So I just wonder if someone could help and tell how I get it working again??? Screen shows everything and qwerty is working fine.
Have you tried an hard reset ?
Moved as not ROM *Development*
Try hard reset, if not working flash stock ROM to test if hardware.
ok
So I Hard reset first. If it doesn´t work I put back stock rom. and do I hard reset stock rom after installation? well I try and reply after I have tried.. thanks.
didn´t work... any other ideas???
the stock rom is same. touch screen doesn´t work though the picture comes.
I faced same problem after endless flashing different ROM, stock Rom no improvment.
Went to HTC service center & they said moatherboard is gone have to replace it.
Related
Im going nutz here so please forgive me..
I've read the rom flashing guides, I've searched for a couple days, but I am STILL unable to flash Dutty's Latest 6.1 hybrid rom. Here's how I attempted it.
Flashed Hardspl v1.
Flashed many diff 6.0 and 6.1 roms & radios. All worked perfectly.
Attempted to flash Dutty's Hybrid 6.1, flash completes to 100% and resets.
I can see the splash screen and even go through the setup. It then freezes on the splash screen and the buttons and screen are unreposive.
Here's some things I've tried after searching here.
Flash a wm 6.1 compatible radio ( I flashed several)
No change. Still frozen after autosetup.
Flash to original AT&T rom for the tilt and reflash back to Dutty's. No change Still froze at boot on splash screen.
Flash all of Dutty's other roms. They are flashed succesfully and work fine.
So here I am...at your mercy. Why would this rom have problems with my Tilt when every other rom I've flashed work just fine?
Any Tips.
If anyone has ANYTHING that could help me I would be very apprectiative.
Thank You
Thrac
Try doing a Hard Reset then re-flashing your device.
HTH.
Thanks
Dave
Or try flashing using MicroSD Card - as described here: http://forum.xda-developers.com/showthread.php?t=336158
RE
Thank you both for your suggestions. I am however still unable to use this rom.
I performed a Hard Reset anad then reflash with both USB and MicroSD. It still freezes at the point right after screen calibration.
Can anyone shed some light here??
Thanks again
Thrac
Thracian said:
Thank you both for your suggestions. I am however still unable to use this rom.
I performed a Hard Reset anad then reflash with both USB and MicroSD. It still freezes at the point right after screen calibration.
Can anyone shed some light here??
Thanks again
Thrac
Click to expand...
Click to collapse
flash to a 6.1 rom you previously flashed that worked. then flash to his hybrid.
I tried upgrading the ROM, which the software rejected. Then it rebooted.
After that the touch screen is not working.... and I tried hard reset... no use.... only buttons are working.
Can anyone help?
Everything Else works fine?
Are you sure the new ROM did not install properly because, I was just wondering - if you don't have touch screen functionality anymore, how did you get past the screen alignment after hard resetting?
You might want to ask the person who cooked the ROM you tried flashing
it didnt
i am stuck at the align screen after hard reset
the rom nver got flashed.
I don't know much about flashing ROM's, Never did it myself yet as I never had a need to yet; however, I have done some reading on the matter and a common theme when people get stuck seems to be to try entering the bootloader again and try reflashing your official ROM. This is what is suggested when people think that they have bricked their devices but can still get into the coloured bootloader screen. You might also be able to just try flashing a different custom ROM aslo since it does not seem that you have bricked your device - just screwed up some registry settings with the attempted / unsuccessful flash (probably partially rewrote some settings and then it failed.
I could be wrong though, as I said, I haven't ever done it myself but these are things that I have read here.
Does anyone else have any other suggestions?
Well, Please point me in the direction if this has been asked before but search hates me right now.
But the problem is I've recently flash Timolol's Stock Like Rom, and it's a nice rom but I am missing sense so I realise that Cap's ROM had been updated I flashed and it was successful but put me into a reset loop and so I reflash it again and it froze on the boot screen.
So I had the idea of flasing back to the original ROM (Stock like) and it's working okay, Why can't I flash to Cap's Rom again?
I had it on there before I went to try Tim's Rom...
EDIT: Forgot to mention that after both ROM flashes of Cap's I did do a hard reset
Thanks
I managed to fix it, (not quite sure what was wrong with it though)
I did a hard reset before I flashed and again afterwards
Hi guys,
I am having a strange problem. I was runing stable CM9 on HTC Sensastion, and yesterday screen just stoped to response to touches. I can wake the phone on button but can not unlock it. After a whole day wiping, doing factory reset, etc, i flashed RUU for it, and screen was working with stock ROM. Looking at HTC Sense I reminded myself why I flashed CM9 in the first place, so Iflashed it again this time CM9.1 stable. Screen issue came back. Then I flashed Bruces CM10 and the issue is still there. ta ****?! Phone is fully functional, exceptit doesn't respond to touches. I can't it 100% doesn't response, because there are some situations (1 of 10) whenunlock animation starts but then freeze. Also, screen is fully functional in 4EXT Recovery.
I did JPBear S-Off
4ext recovery
1.27111 HBoot
flashed cm9.1 and cm10(bruce) over 3.33 ruu
Any sugestions? Thank you for any kind of help!
Ask in the questions and answers section
I am sorry for not putting the thread in right place. I'm preety new/noob.
It's not working with Venom also..
I'm gona flash RUU again...
Instalation through Recovery was smooth, without any problems. When instaling Venom screen is used for selecting options. It worked well there. But when phone boots up, and I touch to unlock, ring moves a bit and freezes. Capacitive buttons are not working also
I'm gona flash RUU again...
I can't believe..screen is working in Stok ROM. Ugliest **** on planet...ghrrrrrrrrrrrrrrrr
Guys..any ideas?
After whole bunch of flashes, I managed it to work somehow with ViperS. After that I flashed CM10, it worked whole day, but same thing in the morning. No response.
One thing that I noticed is that when I format partitions using 4EXT, and looked into info, amount of Size and Free are mismatching, like there is some data on partitions!? Maybe problematic files are in there..Like the partitions are not formated.
I installed a custom rom onto my G920R4 (uscellular s6) and I finally got it to boot. However, the touchscreen does not respond to touch, even though it works in TWRP. I've tried installing a stock ROM, which didn't work due to my own ineptitude, but I'd rather keep my custom ROM anyways. This problem persists across multiple ROMs as well. Thanks for the help.
APoisonPancake said:
I installed a custom rom onto my G920R4 (uscellular s6) and I finally got it to boot. However, the touchscreen does not respond to touch, even though it works in TWRP. I've tried installing a stock ROM, which didn't work due to my own ineptitude, but I'd rather keep my custom ROM anyways. This problem persists across multiple ROMs as well. Thanks for the help.
Click to expand...
Click to collapse
Greetings ans welcome to assist. The touchscreen works in recovery but doesn't what you install a stock rom ? If it works in recovery then it must be either a kernel or bootloader issue. Have you tried factory resetting the phone and then installing stock rom again
Good Luck
Sawdoctor