Database Info

flashed to cricket but no data

I just got a Samsung Moment Sprint(Android) Fully Flashed To Cricket from ebay
sms and voice works great but I cant get data to work
I activated my phone with
some say all you have to do is request to be put on the "ADR Smartphone All In $55" plan. Others like my self also got there phone type listing changed form CPE "Customer Provided Equipment" to the "Kyocera M6000".
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=762756
(didnt work)
also i checked
Don't forget to remove your "autostart.sh" and your "u2nl". autostart.sh is in /data/opt and your u2nl is in /system/bin. Or you could simply remove autostart and reset your phone.
Click to expand...
Click to collapse
(could not find the files)
also it says
you no longer need a WAP proxy. MMS well also work with only the need to setup your APNs. Your internet well be much faster in most cases 2x as fast.
Click to expand...
Click to collapse
how do i check this?
and how do i setup APNs?
I have a little experience rooting android (cliq and nook color) but i know nothing about flashing...
any help would be greatly accepted
thanks!

does anyone have anything? i have been trying to figure this out for around 10 hours today... i also tried pull of the apns-confold.xml edit and but push back in to the phone but that doesnt work eather.

CM7 on D2G - issues with APNs, possibly Rogers specifically?

I'm posting this on the four android-related forums that I participate in, in hopes that someone has seen this before and knows what to do.
Here's what I had:
- Droid 2 Global, unlocked, rooted, with Fission ROM, using Rogers Wireless, a GSM network in Canada
- it had been working just fine for 5 months
Here's what I did:
- Used RSDLite and the SBF loader to flash the stock 2.4.330 firmware as seen here: http://droid.koumakan.jp/wiki/SBF
- ended up with a bootloop, as the directions said I would. cleared data and cashe, no problem, phone booted.
- started up phone, switched to GSM mode, entered APNs, immediately had data service, tested phone functionality, all was well, used APN backup/restore and APN Manager to make backup files of my APNs
- Used stock recovery mode to upgrade to 4.5.607 (gingerbread) firmware as seen here: http://droid.koumakan.jp/wiki/4.5.607_Firmware
- I used the file linked to from here: http://www.droid-life.com/2011/08/22/gingerbread-build-for-the-droid2-global-leaks/
- started up phone, switched to GSM mode, entered APNs, immediately had data service, tested phone functionality, all was well, used APN backup/restore and APN Manager to make backup files of my APNs
- rooted phone using the adb method that is out there. rebooted and confirmed root access. installed a couple apps that need root. tested phone functionality, all was well. used APN backup/restore and APN Manager to make backup files of my APNs
- As described here, http://droid.koumakan.jp/wiki/CyanogenMod Installed Droid 2 Recovery Bootstrap and ROM Manager in order to flash CWM. rebooted into CWM, factory reset, installed the latest release (10/06), and rebooted
- started up phone, switched to GSM mode, phone app crashed immediately (as is to be expected, based on known bugs), rebooted for it to take effect
Now here's the problem:
- phone can make calls and receive texts with no problem, but cannot get data. wifi also works.
- went into wireless settings, mobile networks, access point names, nothing shows up. Clicked "add APN". entered the APN info that had worked for me before at the past two junctions. hit menu button, then save. takes me back to the APN screen, but no APN shows up.
- repeated this cycle a few times following reboots, etc. Eventually the phone gets to the point where the "add APN" button will not even come up when the menu key is hit.
- during the above, was also checking the "network operators" setting. The phone does locate all of the networks that are "in the air" but no matter which one I choose it will tell me "your sim card does not allow a connection to this network"
- used root explorer to check /data/data/com.android.providers.telephony/databases/telephony.db. There is a list of about 1500 APNs. There are multiple entries for Rogers including all of the ones I tried to enter that appeared not to save.
- used APN backup/restore and APN manager to attempt deleting existing APNs, restoring the ones that were known to work, etc. Nothing works. These programs do work, and when I check the telephony.db file I can see what they have done to the file, but they are unfortnately unable to make any APN "stick" at the APN screen, and apparently that is the only way that it will work.
more info:
- I've noticed that the list of rogers entries seems to get larger and larger as I go through this process multiple times. I may be wrong, but it seems that this telephony.db file might not actually get changed or updated when you flash a new kernel/firmware/mod/rom to the phone.
- I'm sure that the lack of a list of APNs and the "sim card does not allow connection" message are related. For whatever reason there seems to be a bug in CM7 where the telephony.db file has problems "talking" to the APN screen in settings. But it must not affect most people.
- yes, I have tried a new SIM card.
- yes, I have tried clearing cache, data, dalvik, and fixing permissions.
- Anyone else on Rogers Running CM7 on a D2G? If so, I'd love to talk to you. Maybe I could convince you to send me a working CWM backup. I imagine that if you're a conscientious rommer, you have a backup made folling a fresh install of CM7.

I used to do at one point. The froyo base 2011.08.13 version was the last one that worked for me. Newer ones boot looped if SIM card is inside, no matter what I do. I stopped trying after couple further releases all of which boot looped. Essentially quit using CM4D2G due to bluetooth not working with BT handsfree. Later, after the official Motorola GB release came, I have not even looked back. Since I like few BLUR features, especially dialler, the GB Motorola released suits me very well. With the doubled battery life and the MUCH BETTER GSM radio in 606/607 bulds, phone finally settled down and I can now rely on it.
I have CM7 on another of my phones - actually 2 of them - a Milestone and (recently) a HTC Vision - I love CM7.1 especially on the latter!
I assume your phone works fine with stock rom - right?
Edit: I have a XT860 which is in for repairs - once I get it back and I have a reliable daily phone I plan to experiment with the new GB based CM4D2G. Hopefully this week...

leobg said:
I used to do at one point. The froyo base 2011.08.13 version was the last one that worked for me. Newer ones boot looped if SIM card is inside, no matter what I do. I stopped trying after couple further releases all of which boot looped. Essentially quit using CM4D2G due to bluetooth not working with BT handsfree. Later, after the official Motorola GB release came, I have not even looked back. Since I like few BLUR features, especially dialler, the GB Motorola released suits me very well. With the doubled battery life and the MUCH BETTER GSM radio in 606/607 bulds, phone finally settled down and I can now rely on it.
I have CM7 on another of my phones - actually 2 of them - a Milestone and (recently) a HTC Vision - I love CM7.1 especially on the latter!
I assume your phone works fine with stock rom - right?
Click to expand...
Click to collapse
Yes, everything works really well with stock rom. I was quite impressed, as it was my first GB experience. Unfortunately, as with cars, I am all about the "options", and I can't seem to let go of a feature once I have experienced it. I love CM7 and I really want to make it work for my D2G.
I posted this same thing at the rootzwiki thread, and one of the head developers said "You my friend may finally have identified where the gsm data issues are coming from. it isnt just you, it's 98% of the gsm users that arent having data". Another user got me to change a couple of permissions. I thought he was onto something but it didn't work, either. Nonetheless, I think I brought enough attention to this issue and also gave them something to work with through all my trial and error. I am optimistic.
But, for now, I think I have to take CM7. I want my data! I am really tempted to just give stock GB a shot. But Blur scares me. Most people don't seem to like it, though I admit I don't fully understand what Blur is! I see there is MIUI and apex, angel Hexen and VenusX. I might have to try them first.

hallo!
had exactly the same problem! i bought a verizon phone an using it in greece!
But i simply dowloaded some APNs manager from the market and within 2 minutes my phone was connecting to the internet!! So if this worked for me i`m sure its gonna work for u too!!

greek_lover_69 said:
hallo!
had exactly the same problem! i bought a verizon phone an using it in greece!
But i simply dowloaded some APNs manager from the market and within 2 minutes my phone was connecting to the internet!! So if this worked for me i`m sure its gonna work for u too!!
Click to expand...
Click to collapse
Can you be more specific as to what you did? Because it sounds exactly like something I tried already. What was the exact name of the software you used? Was your problem 100% exactly the same as mine, or just similar? I literally can't make an APN show up at the APN screen at all.

seventieslord said:
Can you be more specific as to what you did? Because it sounds exactly like something I tried already. What was the exact name of the software you used? Was your problem 100% exactly the same as mine, or just similar? I literally can't make an APN show up at the APN screen at all.
Click to expand...
Click to collapse
Some people have this exact problem with the D3, looks like in the D3 placing the phone in airplane mode and then on again is enough to make the APN manager able to read the MCC/MNC codes and, consequently, to store the provided apn.

I wish it was that easy, but it's not. I have tried a number of solutions similar to that but no dice. I appreciate the attempt though.
Sent from my DROID2 GLOBAL using XDA App

For the record I have that problem on the D2g flashed with the latest builds of cyanogen rom, (with the same SIMs perfectly working on D3 and D2g with the stock rom), and the airplane mode trick doesn't works too.
So far I haven't found a solution

To get my wife's d2g to work in japan I had to use root explorer to manually edit a file. The file is located at etc/ppp/peers/pppd-ril.options mount the file rw and manually edit the user name and password to match your apn. Toggle airplane mode on off after saving changes and it should work.
Sent from my HTC S710d using XDA Premium App

Thanks, i guessed that if a proper fix may be hard to find, a workaround was easy enough, I'll try it later with the gingerbread froyo.

dobosininja said:
To get my wife's d2g to work in japan I had to use root explorer to manually edit a file. The file is located at etc/ppp/peers/pppd-ril.options mount the file rw and manually edit the user name and password to match your apn. Toggle airplane mode on off after saving changes and it should work.
Sent from my HTC S710d using XDA Premium App
Click to expand...
Click to collapse
sounds interesting. I will give that a try the next time I flash CM7. I moved on to Apex. It's ok, but absolutely dreadful for battery life. I can't imagine CM7 is any better considering it has about 50 more bells and 125 more whistles. But I do prefer CM7 to anything else so as soon as I actually have some tweaking time again, I'll give this a shot.
Since both CM7 and Apex are built off the same firmware, I could just flash them overtop eachother, and wipe date and cache, right? As long as it's that easy, I could see myself trying this sooner.

seventieslord said:
sounds interesting. I will give that a try the next time I flash CM7. I moved on to Apex. It's ok, but absolutely dreadful for battery life. I can't imagine CM7 is any better considering it has about 50 more bells and 125 more whistles. But I do prefer CM7 to anything else so as soon as I actually have some tweaking time again, I'll give this a shot.
Since both CM7 and Apex are built off the same firmware, I could just flash them overtop eachother, and wipe date and cache, right? As long as it's that easy, I could see myself trying this sooner.
Click to expand...
Click to collapse
I gave this a try, and no dice. Too bad.
Thanks anyways.

The Solutor said:
Some people have this exact problem with the D3, looks like in the D3 placing the phone in airplane mode and then on again is enough to make the APN manager able to read the MCC/MNC codes and, consequently, to store the provided apn.
Click to expand...
Click to collapse
I now own a D3. CM9 is doing the exact same thing to me!
I tried what you said and I am still not getting data. phone and texts work though, just like before.

[Q] XT720 stock from WIND + Wifi/3G issues

Ok noob alert..just a prelude I've done alot of searching and reading, and *think I have some answers, but if some kind soul were to take a quick look and maybe verify what I've found, I'd be eternally grateful. I used to have a LG Optimus and easily rooted/upgraded to CM7 by reading this forum and didn't have to ask any questions.
Now I've gone and signed up for WIND (Canada) and picked up an XT720. It's my budget and I'm not overly concerned about whether or not I have ICS immediately. I'd rather have something stable and $$ saving.
OK so I'm noticing a serious difference in the way the XT720 handles the WIFI/mobile data situation compared to the LG: it doesn't. First off, there's no easy way to turn off mobile data. Secondly, enabling WIFI gets me a connection to my router, yes, but browsers and apps that require a connection just refuse to use the WIFI unless: 1. there is 3G data connection - in other words, it ain't using WIFI 2. I put the phone in Airplane Mode, and turn WIFI back on. Great, but now no phone calls or SMS. Not a viable workaround. Option 3 involves hard resetting the phone with a battery pull which sometimes works and sometimes doesn't.
From scouring around various sites, this seems to have been a common problem with 2.1 and this model of phone. And thus the workarounds I tried were also employed by others.
From what I know of all versions custom ROMs etc from 2.2 onward for other models of phones, though, this wasn't an issue, and also in 2.2 and onward you can switch off Mobile Data which will force the WIFI connection if turned on.
So is this something that I will see an improvement on if I install say CM 6.3 onward or whatever? I'll get the ability to turn off mobile data, right? And then there theoretically shouldn't be a conflict, right?
That's my biggest issue. I don't get enough 3G signal in my house to just use the mobile data connection, I absolutely have to be able to use WIFI and receive phone calls/texts at the same time, so if custom roms aren't going to help me, I'd best return the phone.
Some other things I'm curious about:
- do most of the normal functions of the phone work with CM 6.3? HD recording, camera, HDMI out etc? Anything I've missed?
- I see quite a bit of talk about people running out of RAM and using sd swapping etc is this a common problem? Even with about 20 or so apps and CM7 on my LG Optimus I was still able to maintain about 110 mb RAM free at all times by judicious use of installing apps on SD card...will I be ok?
- Probably the biggest question before I root/install...most of the guides I'm reading talk about installing various stock sbfs etc etc...I'm coming in from a WIND stock rom so I don't *THINK* I need to do this, right? I should be nandroid'ing, Open Recovery, flash custom rom....right?
Here's my specs
Xt720 Wind Canada
s/w STR_U2_05.1F.2
f/w 2.1-update1
f/w config GAS_NA_NAWIND_P012
Baseband 3GSMEPU91A_U_91.075EI
kernel 2.6.29-omap1
I realize that some of this is covered in other threads. To be honest tho some respondents/contributors aren't English first language and I just want to make sure I haven't misunderstood anything. Anyone who has done similar to what I'm trying to do, especially coming from a WIND perspective, lemme know your thoughts, please and thanks alot!

acrobat69 said:
Now I've gone and signed up for WIND (Canada) and picked up an XT720. It's my budget and I'm not overly concerned about whether or not I have ICS immediately. I'd rather have something stable and $$ saving.
Click to expand...
Click to collapse
I've picked up the XT720 myself from Wind a few days ago at the clearance price ($150 outright, no plan). They even told me there are no guarantees with the phone with its stock ROM and seemed glad to hear that I was gonna use it with a custom ROM. I knew what I was getting into and the only reason I still bought the phone is this:
http://forum.xda-developers.com/showthread.php?t=1300246
We are extremely lucky to get Gingearbread on our phones, so don't even think of ICS at this moment. As you noticed already the stock 2.1 is useless and I flashed mine the 1st day.
acrobat69 said:
That's my biggest issue. I don't get enough 3G signal in my house to just use the mobile data connection, I absolutely have to be able to use WIFI and receive phone calls/texts at the same time, so if custom roms aren't going to help me, I'd best return the phone.
Click to expand...
Click to collapse
The ROM I linked above (the only 2.3, actually CM 7.1 available for XT720) works as you'd expect with wifi and 3g, that is it uses wifi when connected to both. Any decent ROM will do that.
acrobat69 said:
- do most of the normal functions of the phone work with CM 6.3? HD recording, camera, HDMI out etc? Anything I've missed?
Click to expand...
Click to collapse
HD recording - not yet (you don't lose much anyway, the camcorder quality would be crappy, check reviews with the stock OS)
camera - yes (pretty good quality)
HDMI - not yet (I'm guessing it will be fixed very soon, the devs are working on exactly this)
everything else - yes
acrobat69 said:
- I see quite a bit of talk about people running out of RAM and using sd swapping etc is this a common problem? Even with about 20 or so apps and CM7 on my LG Optimus I was still able to maintain about 110 mb RAM free at all times by judicious use of installing apps on SD card...will I be ok?
Click to expand...
Click to collapse
This one is tricky, the phone only has about 225mb usable RAM, there's not much multi-tasking you can do with that amount but it's workable. There are some performance tweaks you can do (overclocking, CM settings, V6 SuperCharger, etc.) to make it decent. Moving apps on sd card is a good idea in order to save storage space on the phone (another limited resource at only 174mb) but has nothing to do with RAM.
acrobat69 said:
- Probably the biggest question before I root/install...most of the guides I'm reading talk about installing various stock sbfs etc etc...I'm coming in from a WIND stock rom so I don't *THINK* I need to do this, right? I should be nandroid'ing, Open Recovery, flash custom rom....right?
Click to expand...
Click to collapse
I've been wondering the same thing, what's up with all the SBFs people are talking about left and right? The answer is don't worry about them, you don't need any SBF. They are just that, stock ROMs, all 2.1. You would only need one (the Wind version) if you wanted to take the phone back for servicing and wanted to return to the original non-rooted state. Apparently even if you take a full nandroid backup with your stock ROM now and restore it later, the phone will still be rooted and this is where a stock SBF would help. I'm not gonna bother, even if I do take it back (highly doubt it, with the custom ROM it's a very good phone for $150 outright), I'm just gonna restore my stock nandroid backup.
So what you need is:
1. root the phone (personally I used SuperOneClick, google for the latest version)
2. install OpenRecovery: http://modmymobile.com/forums/563-m.../531599-open-recovery-v1-46-11-21-2010-a.html
I can send you the file you need if you pm your email address. I HATE it when I have to register on some forum just to get 1 stupid file. And you absolutely CANNOT get that stupid file anywhere else on the face of the Earth/internet.
3. install this mod for OpenRecovery: http://forum.xda-developers.com/showthread.php?t=1242259
4. go to the ROM's thread, dl the latest build linked in the 1st post, copy the zip file to your sdcard\openrecovery\updates, reboot into recovery mode, apply update, format data&cache, reboot. Done. Enjoy!

BuddyBud said:
2. install OpenRecovery: http://modmymobile.com/forums/563-m.../531599-open-recovery-v1-46-11-21-2010-a.html
I can send you the file you need if you pm your email address. I HATE it when I have to register on some forum just to get 1 stupid file. And you absolutely CANNOT get that stupid file anywhere else on the face of the Earth/internet.
Click to expand...
Click to collapse
There's an OpenRecovery apk floating around here to install ther OR bootstrap, no need to register at ModMyMobile.
:Edit:
Woodrube has it attached to this thread. Install the apk from the sdcard, reboot, then run the apk & install OR. (Now you can switch out the OR files with Mioze's modded OR)

here you go

I knew that thread would come in handy one of these days. Plus Buddy and Acro there are other handy APKs in there too.

Mioze actually have all the necessary Open Recovery files linked in his CM6.3 topic
that's the most updated version

THANK YOU THANK YOU THANK YOU to James and everyone who has responded so far - even going so far as to direct link me to files I'll need? You guys are the best!!.
I really appreciate the encouragement. I think tonight's the night.
I'll try and log my procedures and steps and make note of anything I run into for future noobs like me I might be able to help..that's how community works, right?
Wish me luck!

Good luck
One more tip: If you find that Market keeps crashing after you flash fjfalcon's ROM, flash this updated Google Apps package - gapps-gb-20111216 (dl link here).
It worked for me. Put the zip file on the sdcard right next to the ROM file and flash it just like the ROM file.
PS: Who's James?

Ah BuddyBud sorry, there is another Canadian Wind guy named Biker Bob (real name James) who was posting about his experiences in another thread, and I mixed the two of you up..
About to try this...couple questions
Has anyone watched/used Reverend's tutorial video? Results?
I don't need to unlock the phone first, right? Please tell me no, I just got it! lol

The Revs videos are a good reference & if you are talking about a sim unlock that's not necessary.

Yes Revs videos are good to show.a visual of what you should do. Don't worry about it. I know it is scary the first time but once you do it, it will become second nature. Don't forget to wipe cache, dalvik and factory reset. If you bootloop, that is probably why.
No you don't need to be unlocked. That just deals with carriers and not ROMs.

Im on the edge of the decision precipice..am not too nervous about doing this, as in fact I'm pretty technically proficient..it just seemed that this process was a bit more convoluted than the one I picked up on easily for the LG.
Decisions decisions...6.3 or go all the way to 7.1
I think I need stability...and I'm not sure I want to get into a whole bunch of swapping locations etc. I noticed The Reverend mentioned he didn't bother with swaps. Mind you, I don't even think he made an ext partition either, which boggles my mind, I was almost sure you had to make at least one for any custom ROM. I might be showing just how little I know here! lol
Is it just that 7.1 is more of an ongoing thing, or by now are most of the +/- s of both pretty much on par? I know, I should be reading all 78 pages of the damn thread, right??

Oh boy, I just read through the Bravo thread...and the LED notification sounds SOOO tempting. No LED notification bugged the hell outta me on the LG. Hmmmm...

Ok...have settled on the ROM in this thread (Bravo):
http://forum.xda-developers.com/showthread.php?t=1332410
I just want to make sure of one thing...the VERY helpful steps that you all have outlined ie BuddyBuds...they stay the same up to step 4 (ROM + update) no matter what ROM I choose, pretty much.
Brians instructions are just a slight bit confusing in that Im not sure if I have to apply just the most recent update for LED ie v1.6...or if I have to install ALL the updates from the start on up (I think there are 4 of them). To me it would seem logical that each new version would be cumulative ie include the stuff from previous versions...but I just want to make sure!
One more thing..I didnt notice any mention of gapps in the download in that thread (nor did I see a gapps apk in the files I unzipped, but might have missed it..)...if not, Ill need to apply that too, right..any special version to useÉ

Ok so...
I went with Brian's BRAVO. I followed some of the steps provided in this thread, coupled with Reverand's video. I used his OpenRecovery install method (ie original from the Dexter build, copy new over top that) because I've never installed OpenRecovery before and it just seemed confusing on other threads.
To root, I used UltimateAndroot, in order to have the ability to unroot the machine (you'll see why...)
The first thing I checked, of course, was the pull down power/status bar to see about turning off various connections (ie Wifi, Bluetooth, Refresh, Mobile Data, etc). Unlike other 2.2 Froyo's I've used, specifically..LG..there is no pull down/status bar. Damn. Went thru every Setting imaginable, but won't work. This isn't looking great.
Next thing I tested was my 3G/Wifi issue. To my dismay...the issue remains. Browser and apps are still trying to use 3G first and foremost, as far as I can see. How do I know? Because if I leave Data Network Settting to "Allowed", browser/apps work, and *seem to be using the WiFi, but the second the 3G signal fades or is dropped, I get connection issues, and WiFi is still on. If I turn Data Network Setting to "Not Allowed", it might/might not use the WiFi for a bit and then pretty consistently stop. When I mean "stop", I mean the phone is still showing connected to WiFi yet there are data connection errors on all browsers/apps that need data etc. Sometimes, if the 3G signal returns, I get the pop-up asking me to Allow the data, and if I say yes it works for a bit (but then, because of the 3G signal issue, it cuts out again).
The fix - again - turn on Airplane mode, which disconnects all connections, turn on WiFi, then go back into Call Settings and search for the Home Network again. This is crazy, I can't do this every time, and eventually it craps out again and I have to do it all over.
The other really frustrating thing is I powered it down to do a full recharge overnight...when I booted back up it didn't find my Home Network at all and I had to rescan for it. Testing that out, sure enough, rebooting the phone I have to reselect the Network. Argh.
Any thoughts? The whole necessity of being able to turn 3G data off is so I can avoid this very problem. Basically, I walk in my front door, turn off data over the mobile network, and let my WiFi do it all while I'm home. I wish I could do this as effectively as with my LG on 2.2 (and later, CM7)

acrobat69 said:
Ok...have settled on the ROM in this thread (Bravo):
http://forum.xda-developers.com/showthread.php?t=1332410
I just want to make sure of one thing...the VERY helpful steps that you all have outlined ie BuddyBuds...they stay the same up to step 4 (ROM + update) no matter what ROM I choose, pretty much.
Click to expand...
Click to collapse
Once you get to step 4 inn Buddy's list check out this. It will explain it a little bit better. Brought someone back from the brink on this thread. Where is says Dexter, just replace that with Bravo.
Brians instructions are just a slight bit confusing in that Im not sure if I have to apply just the most recent update for LED ie v1.6...or if I have to install ALL the updates from the start on up (I think there are 4 of them). To me it would seem logical that each new version would be cumulative ie include the stuff from previous versions...but I just want to make sure!
Click to expand...
Click to collapse
Per Brian's OP the v1.9 has all the patches.
v1.9,A new Nandroid IMG backup,All patches included(20111217).
Click to expand...
Click to collapse
One more thing..I didnt notice any mention of gapps in the download in that thread (nor did I see a gapps apk in the files I unzipped, but might have missed it..)...if not, Ill need to apply that too, right..any special version to useÉ
Click to expand...
Click to collapse
Gapps is for CM builds. Bravo is a 2.2 build.
Side note: If you are going to partition it is up to you. I and a few other don't but it is really a personal preference. When I did, I used MiniTool Partition Wizard and it worked like a charm.
A few things though:
1: Your partitions must be set up this way---> Fat then EXT2/3 then Swap (if you choose-I don't and never did-requires you to fastboot a custom kernel and since this is your first experience, I would not suggest it)
2: Sizes. Many noobs will set their EXT2/3 partition to 1gb. That is way too big and you are just wasting space. I find that somewhere between 350-400mb is more than enough.
3: Do not convert your Ext partition to EXT4 unless the ROM you choose supports it. If/when the time comes, use MZ's open recovery utility to do it and not GPArted or MiniTool. The creat a Hugefile that has to be deleted and is a PITA.
4: If you do decide to partition, you will have to boot up fully, then go into your root explorer and in the SD-ext, you will need to create a folder called App (not apps-no S) so it will look like this sdcard/sdext/app. Then reboot and your apps will auto-install there.
Sorry for the long post and good luck.
---------- Post added at 11:30 AM ---------- Previous post was at 10:42 AM ----------
acrobat69 said:
Any thoughts? The whole necessity of being able to turn 3G data off is so I can avoid this very problem. Basically, I walk in my front door, turn off data over the mobile network, and let my WiFi do it all while I'm home. I wish I could do this as effectively as with my LG on 2.2 (and later, CM7)
Click to expand...
Click to collapse
Once you click on WIFI it should take over as your primary source of data. Not sure why unless I think I might have figured it out. Go into settings>wireless>tick your WIFI and once your router pops up leave it alone and hit your menu button. Set your WIFI sleep policy to NEVER and I bet that takes care of it. Pretty sure that is toggling off your WIFI when 3g is present.
Other solution is Widgetsoid and Elixir both have a widget to toggle off data (so does Beautiful widgets too for that matter). You can use those but I really think the above solution should work for you.

Woodrube said:
Per Brian's OP the v1.9 has all the patches.
Click to expand...
Click to collapse
Ah, figured..however when I go into LED Notification, it says "revision 1.6" (or some wording to that effect) at the bottom. Maybe that's just an error, but I just used that to gauge whether or not I had installed the latest revisions etc.
LED Notification works for text messages. I haven't seen it work for calls yet, but maybe I'm doing something wrong. I call the phone, the screen lights up that there's a call, and then ultimately closes when noone answers it. It was at this point that I'd assume the LED notification would come on. Screen is out, so LED, right?
Woodrube said:
Gapps is for CM builds. Bravo is a 2.2 build.
Click to expand...
Click to collapse
Ok I guess I goofed then, because I tried to update with Gapps after I installed Bravo. One thing I noticed is that I wasn't prompted to sign up/into my Google accounts or set up the phone when I rebooted following the Bravo ROM + Gapps install..that had always happened on my LG when I did CM installs...your explanation makes sense!
But...isn't CM6 basically 2.2 and Bravo basically 2.2? Or maybe I misread that.
At any rate, the real reason I updated Gapps is because I wanted the "new" Market look. I don't like the old one very much, really like the My Apps function. Is there way I can just patch this in to Bravo?
Woodrube said:
Side note: If you are going to partition it is up to you. I and a few other don't but it is really a personal preference.
Click to expand...
Click to collapse
Why do people partition? I did it on my LG, but never used it. Partitioning has nothing to do with installing user apps to the SD card, right? I can do that anyways, true?
Speaking of which..in CM there is the ability to set the default install location. I searched to find something similar in Bravo, to no avail. Is there a way to do this?
Wait...I think you just gave me the answer to both these questions...duh me..
Woodrube said:
4: If you do decide to partition, you will have to boot up fully, then go into your root explorer and in the SD-ext, you will need to create a folder called App (not apps-no S) so it will look like this sdcard/sdext/app. Then reboot and your apps will auto-install there.
Click to expand...
Click to collapse
I guess I do in fact want to partition, then. I can't imagine how one wouldn't want to, I mean you don't want apps clogging up internal memory, right?
Woodrube said:
Sorry for the long post and good luck.
Click to expand...
Click to collapse
Never apologize for long posts...I'm the worst at it and I love pouring over every single last detail. I'm sure there are lurkers who appreciate also, I know I really did when learning on my LG. Thanks a million!!

Woodrube said:
Once you click on WIFI it should take over as your primary source of data. Not sure why unless I think I might have figured it out. Go into settings>wireless>tick your WIFI and once your router pops up leave it alone and hit your menu button. Set your WIFI sleep policy to NEVER and I bet that takes care of it. Pretty sure that is toggling off your WIFI when 3g is present.
Other solution is Widgetsoid and Elixir both have a widget to toggle off data (so does Beautiful widgets too for that matter). You can use those but I really think the above solution should work for you.
Click to expand...
Click to collapse
DOHHHHH!!!! I knew I had forgotten something about past settings that made my LG work so well.. I have modified the Wi-Fi sleep policy and hopefully it will work better now! One constant in all the issues I was having, now that you've mentioned this, is that the screen was sleeping/timing out while things were going on. I'd bring it back up, and be all "like, wtf" when my browser wouldn't work or apps that were downloading hung, etc. Mind you, it probably should have reconnected by itself, but whatever, if it doesn't, there's no harm in using Never Sleep for WiFi. I'm not that much of a stickler for battery usage. I go to bed, I charge the phone, I wake up, repeat. I don't need 4 days battery life and if I ever am in a situation where I do, I'm camping or somewhere remote ie no WiFi hence this doesn't apply as I'd just toggle WiFi off completely anyways.
You're right, I could use a Widget to manage my connections and I managed to grab Beautiful when it was 10 cents..but those reside on the screen and I would love to get that pull-down bar back, just so handy to drag down no matter what app/screen you're in...I know, I'm picky

You know what? I got a Notification Toggle app on my PC at home that I'll upload here tonight. I just remembered it while I was at lunch. It is from an older ROM so not sure it will work but worth a try. Usual directions. Push it to /system/apps reboot. It should be just what you are looking for if it works. Might not though so you'll just have to see.
CM6 is 2.2 and so is Bravo only Bravo was made from the official Korean update that was handed down and Mioze has created the CM6 from source. So yes they are both 2.2 but very different.
Edit: I have the latest Market.apk too. It is floating around here somewhere but I can't find in for some reason. I'll upload them tonight.

acrobat69 said:
Decisions decisions...6.3 or go all the way to 7.1
Click to expand...
Click to collapse
try them both first, then see which one you want to use as your daily driver.
i personally like the 6.3 better because it runs the fastest even on stock speed 720 Mhz
you can use Open Recovery to do a full backup, and switch back and forth between 7.1 and 6.3 until you decide which one you like best
7.1 has more themes to choose from and is more up to date, but... less free resources vs. 6.3 which is indirectly related to why it feels less quick than 6.3
7.1 feels similar to the speed you get on the stock ROM from Wind, 6.3 feels like a brand new device

FIXED - Freedompop (Sprint), 4G/LTE and custom ROM

It appears that 4G doesn't work with FreedomPop and most custom ROMs. It seems like either custom roms are detected by FreedomPop and disactivated from 4G, or (more likely) most ROMs have the wrong 4G information wrong for FreedomPop.
It could well be that most roms incorrectly detect the FreedomPop 4G network as Sprint. I know a similar problem exists with Credo Mobile, in which case changing the APN network information solves the issue.
Moreover, on reddit someone claims 4G works on cyanogen 7 but not on later version. Maybe that could help solve the issue?
I'd be very happy if one of you could help me figure what is wrong, or if you got 4G to work with a custom ROM on FreedomPop.

Solved!
Basing myself on the Boost Mobile APN fix, I made a new fix that should give 4G/LTE to FreedomPop users.
Download the FreedomPop fix here.
Just download the fix, put it on your phone, boot into your recovery (I suggest Philz), select Install Zip, and install the fix.
This new fix, compared to the previous one has the benefit of providing an extra APN (n.f6.ispsn) that should give superior performances. Moreover, the fix should be more robust, being based on the Boost Mobile fix instead of the Ting fix. Finally, it will also display "FreedomPop" (instead of Sprint) as your provider.
The previous method is also listed here in case it is of interest to you.
Previous method:
I found a way to get 4G on FreedomPop with Cyanogenmod 11! Just follow these simple instructions:
1. Download the Ting APN fix for Android 4.4 on your PC
2. Unzip the Ting APN fix somewhere.
3. Replace the apns-conf.xml file in system/etc/ directory of the unzipped Ting APN fix with this file: http://www.mediafire.com/view/25xozc3p6okf8zw/apns-conf.xml
4. Re-zip the Ting APN fix (with the modified apns-conf.xml), and put in on your phone.
5. Boot to Philz recovery, select Install Zip, and install the modified Ting APN fix. Voila! 4G/LTE should work (make sure to enable it in settings/mobile networks!)
Note that this will work on the S3, but may not work on other phones. To obtain proper apns-conf.xml file, I recommend you flash to 4.3 stock rom, and copy the apns-conf.xml file from /system/etc/apns-conf.xml file of your android and use that instead for step 3.

Freedompop phone to a Sprint Account
Hey guys, I have a nice Freedompop Galaxy s3 that came straight from FP rooted with their proprietary ROM. But the FP ROM is designed to use VOIP to make all calls and seems to do away with any actual cdma(?) dialer altogether. It's a nice phone for $200.00 and I think I'd like to keep it. But when I tried to activate it on my Sprint account, they get an error on their end and don't recognize it.
This question is for you hardcore developers out there. How can I completely reprogram it to a rooted sprint firmware with a dialer and activate it in place of my older HTC 4G LTE. But also "save" the FP ROM for restore if it won't activate. I have til October to return it, so I thought I'd play.
You should also know 1) that FP definitely runs on the sprint network and seems to work exclusively through their 3g/4g lte service (hence the proprietary ROM and no solid phone connectivity); 2) this galaxy is marked as "refurbished" (in pristine condition) and has no Sprint logo on it all (they asked me about this on the sprint chat site); 3) the battery drained pretty fast and the phone would get warm (my HTC never had these issues, though it seems to be common among s3 owners); 4) but all that being said, it's super fast (cf. to EVO) and I think I might enjoy the upgrade at this price.
Thanks for thinkin on it.​Masterhanger

masterhanger said:
Hey guys, I have a nice Freedompop Galaxy s3 that came straight from FP rooted with their proprietary ROM. But the FP ROM is designed to use VOIP to make all calls and seems to do away with any actual cdma(?) dialer altogether. It's a nice phone for $200.00 and I think I'd like to keep it. But when I tried to activate it on my Sprint account, they get an error on their end and don't recognize it.
This question is for you hardcore developers out there. How can I completely reprogram it to a rooted sprint firmware with a dialer and activate it in place of my older HTC 4G LTE. But also "save" the FP ROM for restore if it won't activate. I have til October to return it, so I thought I'd play.
You should also know 1) that FP definitely runs on the sprint network and seems to work exclusively through their 3g/4g lte service (hence the proprietary ROM and no solid phone connectivity); 2) this galaxy is marked as "refurbished" (in pristine condition) and has no Sprint logo on it all (they asked me about this on the sprint chat site); 3) the battery drained pretty fast and the phone would get warm (my HTC never had these issues, though it seems to be common among s3 owners); 4) but all that being said, it's super fast (cf. to EVO) and I think I might enjoy the upgrade at this price.
Thanks for thinkin on it.​Masterhanger
Click to expand...
Click to collapse
If I understand the issue, you got yourself a FreedomPop phone that you wish to activate with Sprint (NOT with FreedomPop)?
If so, I see two potential issues:
1. Your phone IMEI is with FreedomPop, and thus no longer recognized by Sprint. You'll have to ask Sprint to get your IMEI back, if possible.
2. You are using a FreedomPop ROM, and that ROM doesn't allow Sprint activation. Hopefully the actual phone is the same as the Sprint version and only the ROM is different. If you go to Settings and the model number is SPH-L710 then you are probably good. Try installing a Sprint stock ROM and then activate. I strongly recommend you backup your entire phone (including boot and efs) before you do that through, preferably through Odin - but be warned that you may hard brick your phone.

Works, but no sprint optimizer, profile update, or PRL
Hey Merudo,
I really appreciate the fix, thank you for that! However, as you can see in the title, there is no sprint optimizer, profile update or PRL update. That is really important stuff as the networks changes and upgrades all the time. Is there any way that file can be included too? Maybe I'm missing something, but the Tink fix said that there should be a sprint network update for the profile and PRL next to the CyanogenMod updates in About phone in the settings, but I never saw that when I put that on my phone. I have a Galaxy S3 phone I bought from freedomPop, but I absolutely hated the Samsung ROM so I wanted to flash CyanogenMod and now I'm having problems. I hope you have some ideas or can clear things up. Thanks again for the fix, and I saw your post on CyanogenMod site about this, that would be awesome if they did put this file into the ROM!

ColdHot said:
Hey Merudo,
I really appreciate the fix, thank you for that! However, as you can see in the title, there is no sprint optimizer, profile update or PRL update. That is really important stuff as the networks changes and upgrades all the time. Is there any way that file can be included too? Maybe I'm missing something, but the Tink fix said that there should be a sprint network update for the profile and PRL next to the CyanogenMod updates in About phone in the settings, but I never saw that when I put that on my phone. I have a Galaxy S3 phone I bought from freedomPop, but I absolutely hated the Samsung ROM so I wanted to flash CyanogenMod and now I'm having problems. I hope you have some ideas or can clear things up. Thanks again for the fix, and I saw your post on CyanogenMod site about this, that would be awesome if they did put this file into the ROM!
Click to expand...
Click to collapse
Hi ColdHot,
Sadly, profile/PRL update on custom ROM is a problem on all Sprint providers (Including Boost, Credo, FreedomPop, Ting, Virgin Mobile, and Sprint itself).
As far as I know, no custom ROM has built-in support for profile/PRL update for any of these providers.
I believe most people deal with the issue by switching back to a stock rom each time they wish to update profile or PRL. I personally switch back and forth between two full backups I make with Philz Touch Recovery.
Please do tell me if you ever find a better way!

Merudo said:
Basing myself on the Boost Mobile APN fix, I made a new fix that should give 4G/LTE to FreedomPop users.
Download the FreedomPop fix here.
Just download the fix, put it on your phone, boot into your recovery (I suggest Philz), select Install Zip, and install the fix.
This new fix, compared to the previous one has the benefit of providing an extra APN (n.f6.ispsn) that should give superior performances. Moreover, the fix should be more robust, being based on the Boost Mobile fix instead of the Ting fix. Finally, it will also display "FreedomPop" (instead of Sprint) as your provider.
The previous method is also listed here in case it is of interest to you.
Previous method:
I found a way to get 4G on FreedomPop with Cyanogenmod 11! Just follow these simple instructions:
1. Download the Ting APN fix for Android 4.4 on your PC
2. Unzip the Ting APN fix somewhere.
3. Replace the apns-conf.xml file in system/etc/ directory of the unzipped Ting APN fix with this file: http://www.mediafire.com/view/25xozc3p6okf8zw/apns-conf.xml
4. Re-zip the Ting APN fix (with the modified apns-conf.xml), and put in on your phone.
5. Boot to Philz recovery, select Install Zip, and install the modified Ting APN fix. Voila! 4G/LTE should work (make sure to enable it in settings/mobile networks!)
Note that this will work on the S3, but may not work on other phones. To obtain proper apns-conf.xml file, I recommend you flash to 4.3 stock rom, and copy the apns-conf.xml file from /system/etc/apns-conf.xml file of your android and use that instead for step 3.
Click to expand...
Click to collapse
OH MY GOODNESS THANK YOU SO MUCH MAN!!! I've seriously tried everything to get my 4G to work on my cyanogenmod infused freedompop (although its a sprint deivce) even by inputting my own apn's I found on the web. I was seriously even considering switching back to sprint just because 3g speeds just weren't cutting it. This finally did the trick. Thanks so much!

So ur fkashed to boostmobile with a freedom pop lte card in getting 4g lte? And boostmobile 3g and voice??
Sent from my SM-G900P using Tapatalk

Wicked X on Freedompop
I was running Wicked Sensations when I switched to FP. Nothing but headaches all around. Couldn't place calls off wifi, no 4G, PRL or Profile updates. FP support was useless at trying to resolve.
I then switched to Wicked X and the phone is running smooth. Optimizer, 4G, PRL and Profile updates are all working fine. I'm getting better battery life than my wife's phone we just purchased from FP running their ROM. Seems to be a good ROM so far for FP service.

Thanks, Merudo.
For anyone wondering, I applied this on a 5.0 rom on my S3 and it seems to work great.

usjbm said:
Thanks, Merudo.
For anyone wondering, I applied this on a 5.0 rom on my S3 and it seems to work great.
Click to expand...
Click to collapse
thanks for your information,
can you set the messaging (from freedompop) as defaulted dialer?
I tried the cynammod rom, when I used messaging app to dial the original dialer alway launched out, it is very annoying, so I have to flash back to freedompop rom.
has 5.0 the same problem? thanks!

New Fix Disclaimer
Hey Merudo,
I may get an S4 to use with FP and noticed your old fix had a disclaimer that it may not work on non-S3s. Could you clarify if the new fix has the same disclaimer? I see your comment in the .sh file says it handles universal lte builds but just want to make sure before purchasing otherwise I'll probably just go with an S3.

Not working... loosing my mind=(
I just moved and should be looking for work but, instead, I'm loosing my mind trying to make this work on my Sprint S4 running and, albeit, weekly build of CM12. For the love of god, has anybody figured anything out with that? It's really hard to network when I have no way of getting back to people. Not to mention how much I just spent on this phone.
Please help

I haven't been able to get any APN fix to work for freedompop on any Lollipop rom on my S4.
I get 3G without applying any fix, and either nothing happens, or I can't connect at all when using one of the 3 APN fixes I found.
Not sure why they don't work.

Can't seem to get data 3G/4G to work.
Can't seem to get data 3G/4G to work. When I disable wifi, I lose my Sprint(Freedompop) connection. I cant connect to the internet, etc.
I've tried these so far but nothing worked for me:
Universal_vmu_ApnFix-v.R2.zip
Freedompop APNs fix.zip
I love how fast this ROM is and want to make it my daily use phone.
Is there a specific process for getting it to work? Just want to make sure I'm not missing something.
Any advice/help is appreciated.
Freedompop (Sprint) SPH-L710 (Samsung Galaxy S3)
CM version 12-20150120-UNOFFICIAL-d2spr (lollipop 5.0.2 unofficial)
Baseband version: L710VPUDND8
EDIT: Is there a specific way to install to get it to work or? Or any other info I can provide that will help?
My current install went like this: wipe cache, wipe devik, factory reset, install CM12 ROM, install Freedompop APNs fix.zip, install gapps-1p-20141109-signed.zip, install Freedompop messaging, confirm registration, disable wifi, and no 3g/4g.
030415 Edit: My issue is resolved! I dialed *#*#4636#*#* and the TESTING screen came up immediately. Under "Set preferred network type:", I switched it to: LTE/GSM/CDMA auto (PRL) in the dropdown menu. I then turned off my WIFI, and LTE immediately showed up! I tested going to a webpage and it works!! I cannot thank you (shakim24 and XDA) enough!!! Turning the WIFI back on is a little tricky and requires some patience, but it will come back on. :good: :victory: :highfive:

Works for Nexus5 CM12 weekly
I am using multi rom with stock as the primary rom. I used that to update PRL and everything works as expected without any modifications. However, the CM12 data settings did not work without the FIX attached in this thread.

What ROM?
usjbm said:
Thanks, Merudo.
For anyone wondering, I applied this on a 5.0 rom on my S3 and it seems to work great.
Click to expand...
Click to collapse
Can you tell me what ROM you used, because I have not been able to find one for my S3

Should I download the fix from the attachment or on the link?
They seem to be different.
UPD: one in attachment seem to be better (more settings in the apns-conf.xml)
I'm also attaching another version of this fix with even more APNs for Freedompop. It equals the setup that came with original FreedomPop ROM

i am having same issue and none of these PRL's work. Can you tell me which fix you used before modifying the settings in TESTING menu
---------- Post added at 11:10 PM ---------- Previous post was at 11:08 PM ----------
donclark said:
Can't seem to get data 3G/4G to work. When I disable wifi, I lose my Sprint(Freedompop) connection. I cant connect to the internet, etc.
I've tried these so far but nothing worked for me:
Universal_vmu_ApnFix-v.R2.zip
Freedompop APNs fix.zip
I love how fast this ROM is and want to make it my daily use phone.
Is there a specific process for getting it to work? Just want to make sure I'm not missing something.
Any advice/help is appreciated.
Freedompop (Sprint) SPH-L710 (Samsung Galaxy S3)
CM version 12-20150120-UNOFFICIAL-d2spr (lollipop 5.0.2 unofficial)
Baseband version: L710VPUDND8
EDIT: Is there a specific way to install to get it to work or? Or any other info I can provide that will help?
My current install went like this: wipe cache, wipe devik, factory reset, install CM12 ROM, install Freedompop APNs fix.zip, install gapps-1p-20141109-signed.zip, install Freedompop messaging, confirm registration, disable wifi, and no 3g/4g.
030415 Edit: My issue is resolved! I dialed *#*#4636#*#* and the TESTING screen came up immediately. Under "Set preferred network type:", I switched it to: LTE/GSM/CDMA auto (PRL) in the dropdown menu. I then turned off my WIFI, and LTE immediately showed up! I tested going to a webpage and it works!! I cannot thank you (shakim24 and XDA) enough!!! Turning the WIFI back on is a little tricky and requires some patience, but it will come back on. :good: :victory: :highfive:
Click to expand...
Click to collapse
i am having same issue and none of these PRL's work. I am on CM 12.1, can you tell me which fix you used before modifying the settings in TESTING menu
Update : i finally got it working with flashing the PRL in first post but the phone works only when Data is enabled. when Data or wifi is switched off, i am not able to make or receive any calls. Does anyone has the same issue.

ajeevlal said:
i am having same issue and none of these PRL's work. Can you tell me which fix you used before modifying the settings in TESTING menu
---------- Post added at 11:10 PM ---------- Previous post was at 11:08 PM ----------
i am having same issue and none of these PRL's work. I am on CM 12.1, can you tell me which fix you used before modifying the settings in TESTING menu
Update : i finally got it working with flashing the PRL in first post but the phone works only when Data is enabled. when Data or wifi is switched off, i am not able to make or receive any calls. Does anyone has the same issue.
Click to expand...
Click to collapse
You can only make/receive calls when Data is enabled? It doesnt work via wifi? While data is turned off, open the Freedompop Messaging app and see if indicates that you are registered. What happens specifically when you try to make a call? (what errors or messages do you get)

Question Anyone having issues with VoWiFi NA version?

I just got the NA version of the ROG Phone 5 and sadly I cannot get VoWiFi working on TMobile. Sadly I'm in an area where I don't get the best signal and it's extremely important for this feature to work. Especially considering I spent 1k+ for this phone... Any help/guidance would be appreciated.

Have you enabled it in settings and then tried a reboot?
I've also noticed that it may not work until the SIM is installed BEFORE initial setup (or before a factory reset)

I confirmed with other people too. US version doesnt have Tmobile wifi. If it would, I would have bought one

twistedumbrella said:
Have you enabled it in settings and then tried a reboot?
I've also noticed that it may not work until the SIM is installed BEFORE initial setup (or before a factory reset)
Click to expand...
Click to collapse
Yeah I tried that but didnt work so i manually enabled it using the phone dialer and after i toggle it on or off it will turn on but it turns off after reboot so need to root it so i can make the settings stick.

daviddem said:
I confirmed with other people too. US version doesnt have Tmobile wifi. If it would, I would have bought one
Click to expand...
Click to collapse
It actually does work

My AT&T and T-Mobile SIMs (both Red Pocket MVNO) have VoLTE but not VoWiFi.

kva1992 said:
It actually does work
Click to expand...
Click to collapse
So do you get wifi calling with US ROG phone on Tmobile?

daviddem said:
So do you get wifi calling with US ROG phone on Tmobile?
Click to expand...
Click to collapse
Yup just have to manually enable it Everytime it boots up but if you root it you can set the props and it will be permanent. In the process of doing that atm.

kva1992 said:
Yup just have to manually enable it Everytime it boots up but if you root it you can set the props and it will be permanent. In the process of doing that atm.
Click to expand...
Click to collapse
Thank you. I was debating between ROG or xperia 1iii. but if this works. Ill get ROG.
If you dont mind, can you please post the dialer code

daviddem said:
Thank you. I was debating between ROG or xperia 1iii. but if this works. Ill get ROG.
If you dont mind, can you please post the dialer code
Click to expand...
Click to collapse
Sure here you go *#*#3642623344#*#*
You should be able to copy and paste if that doesn't work try pasting but delete the last * and add it manually. If that still doesn't work just manually type it in. But I tested it out a few times nd it works even turned on airplane mode and it works. Wi-fi calling was a deciding factor for me lol was about to return it until I found out I could get it to work properly.

daviddem said:
Thank you. I was debating between ROG or xperia 1iii. but if this works. Ill get ROG.
If you dont mind, can you please post the dialer code
Click to expand...
Click to collapse
kva1992 said:
Sure here you go *#*#3642623344#*#*
You should be able to copy and paste if that doesn't work try pasting but delete the last * and add it manually. If that still doesn't work just manually type it in. But I tested it out a few times nd it works even turned on airplane mode and it works. Wi-fi calling was a deciding factor for me lol was about to return it until I found out I could get it to work properly.
Click to expand...
Click to collapse
I'd like to add that after running the dialing code you have to enable wifi calling in the settings app.
Aswell as that, at least for me, I need to disable and re-enable it within settings after re-running the dial after reboot, for it to actually reconnect
Just to avoid any confusion.
This does work tho! Kva is right!

Trickster29 said:
I'd like to add that after running the dialing code you have to enable wifi calling in the settings app.
Aswell as that, at least for me, I need to disable and re-enable it within settings after re-running the dial after reboot, for it to actually reconnect
Just to avoid any confusion.
This does work tho! Kva is right!
Click to expand...
Click to collapse
Thank you both. Ill order the phone and try it.

Trickster29 said:
I'd like to add that after running the dialing code you have to enable wifi calling in the settings app.
Aswell as that, at least for me, I need to disable and re-enable it within settings after re-running the dial after reboot, for it to actually reconnect
Just to avoid any confusion.
This does work tho! Kva is right!
Click to expand...
Click to collapse
It's so stupid wish they enabled it by default would make all our lives easier

kva1992 said:
It's so stupid wish they enabled it by default would make all our lives easier
Click to expand...
Click to collapse
I agree, but idk if they need some authorization from T-Mobile to enable it by default and we're just the end user working around that.
Otherwise, I'm not really sure at all why the functionality is developed but not enabled by default.

Trickster29 said:
I agree, but idk if they need some authorization from T-Mobile to enable it by default and we're just the end user working around that.
Otherwise, I'm not really sure at all why the functionality is developed but not enabled by default.
Click to expand...
Click to collapse
Yeah it's stupid I ended up talking to advanced tech support and the guy has never heard of ROG phone 5 and said I should return it cuz it seems like it's a hardware issue.... I'm like dude it's your system not giving me proper access's and authorizing my phone... He's like I guess you know more about phones than I do... The idiot even made me reset my phone to try and fix it even though I told him several times that has nothing to do with it.... I swear I have no idea how some of these morons get jobs as IT... At least have basic IT understanding....

They're not in IT. They're customer service reps. They read from a script.
Check out the movie The Internship. It's just like that.

twistedumbrella said:
They're not in IT. They're customer service reps. They read from a script.
Check out the movie The Internship. It's just like that.
Click to expand...
Click to collapse
Well, when I'm talking to the advanced Technical team I am not talking to customer service reps... I talked to a customer service rep and they forwarded me to the IT team. Considering they are called advanced technical teams I would assume they are in IT. whereas the initial person I talked to was and clearly stated she was a customer service rep.

The only difference between the two people you spoke with is that one had access and authorization to suggest more "advanced" solutions. I'm not saying they shouldn't have better training, but legitimate IT professionals rarely work the call center as more than a summer job.
Anyway, the point was that they're a waste of time unless the issue is the SIM card or your plan. It's unfortunate.
Dial codes typically trigger an intent. If you can track down the intent, you can have it launch automatically on boot. Once that's taken care of, it shouldn't be too hard to automatically enable the setting. That is assuming you called because setting the prop didn't work.
Another alternative if you do have a property and can't write to system is setting it with a magisk module, since the system is read only on a firmware level.

twistedumbrella said:
The only difference between the two people you spoke with is that one had access and authorization to suggest more "advanced" solutions. I'm not saying they shouldn't have better training, but legitimate IT professionals rarely work the call center as more than a summer job.
Anyway, the point was that they're a waste of time unless the issue is the SIM card or your plan. It's unfortunate.
Dial codes typically trigger an intent. If you can track down the intent, you can have it launch automatically on boot. Once that's taken care of, it shouldn't be too hard to automatically enable the setting. That is assuming you called because setting the prop didn't work.
Another alternative if you do have a property and can't write to system is setting it with a magisk module, since the system is read only on a firmware level.
Click to expand...
Click to collapse
How would I set that up using magisk module? One Issue I have noticed is the wifi calling turns itself off after a while. sometimes it works for several hours other times maybe a day but then turns off and I have to restart the phone and run the command again.

Developer Guides
The Magic Mask for Android
topjohnwu.github.io