I have attempted to sync music for two days now with no success. It recognizes the phone in WMP and when I drag the music into the SYNC window it all shows correctly. Even says how much space will be left. After hitting sync it says "sync complete you can disconnect the device now" but nothing happens. Anybody else had the problem and found a solution. Or any ideas?
Did you ever get this to work? I right now am trying to sync my phone to WMP and WMP won't recognize it. I have Windows 7 32bit. The phone gets recognized easily when it put it in Mass Storage mode. When I put it in media mode the PC makes the sound that a USB device was detected, but nothing happens.
I haven't installed any USB drives, but what I see they are for XP and Vista.
Anyone know what I could be doing wrong?
Also I am using the Samsung launcher and not any other one when I am doing this, don't know if it matters.
If you are running a launcher other than TW it won't show up as a syncable device in WMP when you connect with media mode. There is a pop up message but its easy to miss.
You need to run launch switcher and make sure you are using TW Launcher and then plug in the USB cable and WMP should see your device.
Hope that helps.
Bob
If you are in mass storage mode, once you plug your Captivate into the PC, a notification will appear in the notification bar. Slide down the notifications and press it. This will mount your internal and external SD cards so your PC can see them. Syncing with WMP should work then.
Thanks! I got it working but not sure what I did to make it work, as you will see I did several things:
1) I uninstalled the MGtek Dopisp or whatever that program was that would allow iPods to sync to WMP
2) Then I installed the X86 drives for Samsung phones
3) It TRIED the MTP connection but Windows driver install failed again on the driver when I tried using my phone as a media player.
So I tried it again as a Mass Storage Device and it actually showed up in WMP and I was pleseantly suprised it let me since to either the internal memory or SD card.
Hey all, I've had my Captivate now for afew days and I'm loving it, but today I ran across an issue that's driving me crazy.
For some reason when I connect it to my PC I'm not longer getting the Mount SD option on the phone and can't look at my files. I've enabled USB debugging and tried it. I've told it to come up as Mass Storage and tried it. I also told it to Ask when connected and it's still not working properly. The drives show up in Windows but cannot be accessed. I also no longer get the USB notification up in the notification bar.
The weird thing is sometimes if I restart the phone and connect it everything is fine, but then if I go to do it again nothing. Anyone have any suggestions?
Biggest misconception here is that its random, it isn't.
Download kies by samsung and update it and you will get the right USB drivers installed automatically.
If you choose not to do that, you'll Vast have to keep trying different ports or restarting.
Its also possible that you may have a faulty wire but this is unlikely.
systoxity said:
Biggest misconception here is that its random, it isn't.
Download kies by samsung and update it and you will get the right USB drivers installed automatically.
If you choose not to do that, you'll Vast have to keep trying different ports or restarting.
Its also possible that you may have a faulty wire but this is unlikely.
Click to expand...
Click to collapse
I've tried it with multiple wires, and when it works it is reliable, but most of the time it's just not showing a USB connection on the phone.
I spent awhile downloading Kies and it's updates and in Mass Storage mode it sees the drives of the phone but doesn't let me use them. I Kies mode it does nothing... This is so confusing...
Go in here download the drivers:
http://forum.xda-developers.com/showthread.php?t=728929
Be aware, they might take up to 15 minutes to install, and no KIE is not included.
Make sure you close all your apps on phone before connecting to PC. Few apps that use the SD will hold the resource and not allow for PC connection.
skizzz said:
Go in here download the drivers:
http://forum.xda-developers.com/showthread.php?t=728929
Be aware, they might take up to 15 minutes to install, and no KIE is not included.
Make sure you close all your apps on phone before connecting to PC. Few apps that use the SD will hold the resource and not allow for PC connection.
Click to expand...
Click to collapse
I downloaded those afew days ago but I will redownload and reinstall again just incase. I think the fact that the USB notification isn't showing up in the bar on the top of the phone is what's confusing me the most. Previously I would see the USB Icon and something would pop up saying I need to mount the drive. I would mount it and there would be no problem. Now I'm not getting that at all and I've tried Mass Storage, USB Debugging, Kies, and Ask.
I've never had a problem connecting my Captivate to my Windows 7 64 bit computer. I didn't install Kies or any drivers either. Not sure what all the fuss is about. I'm suspecting a lot of PEBCAK errors.
I'm starting to think there are some strange power requirements when connecting the phone to USB. Most of my systems have been fine but on one, when I connect the phone to the front USB ports, the USB Wifi adapter on the back simply stops working. While the phone is connected, the computer refuses to recognize the Wifi adapter. A soon as I disconnect the phone it starts working again.
I've seen people on other forums with intermittent issues getting the mass storage connection to work when connected to the front ports on their systems. A lot of times the front ports are connected through a USB hub in the computer case that doesn't deliver full power. If the phone isn't drawing enough power or is shunting power from other devices, this might explain the issues people are having.
Mine is acting up . I used both teh 5.02 drivers from samsung and the one linked here and similar results. In Samsung mode it goes to the Digital Still camera and flakes and on mass storage it shows two new drives..neither of which is writable or readable. This is on a cap with no SD card and XP sp3. I tried different ports but with the same result.
I was fighting with this all day. I installed, uninstalled, reinstalled all the drivers and kies, but, I was trying to connect via media player and nothing was happening. Then I noticed that there was a small message popping up on the Captivate's screen that said something about the device had to be on the idle screen before it would connect and fun the sync software. Tried turning off all running programs and still nothing. Then, I remembered that I had switched to Launcher Pro. I switched back to touch wiz, and lo and behold, it connected right up and allowed me to sync items with media player.
Interesting. I've been using ADW.Launcher and haven't see this problem except when I don't get the cable securely inserted into the Captivate. I even use a Nokia cable most of the time. The Kies Drivers are clearly the most stable. I downloaded the Drivers from the Captivate microsite and found they didn't support KIES, so I just reinstalled the KIES driver for MTP. Everything else works fine on W7x64.
++++UPDATE+++++ Validating MSHampton post
Well this sucks. On my Captivate, unless you are using TW.Launcher and in the idle screen, the Captivate won't launch MTP so you can connect to KIES. The USB Storage mode works with other Launchers (ADW and LaunchPro), but not KIES or Media. I didn't try PC Internet tethering. I switched between the two several times, and KIES only works with TW.Launcher on my device.
Is there anyone who knows of a Launcher OTHER than TW.Launcher that will interface with KIES so that the Captivate can connect? Or can ADW or LauncherPro be "tweaked" for the Captivate? I was just starting to like ADW.Launcher.
hitchb said:
[snip] Most of my systems have been fine but on one, when I connect the phone to the front USB ports, the USB Wifi adapter on the back simply stops working. While the phone is connected, the computer refuses to recognize the Wifi adapter. A soon as I disconnect the phone it starts working again.
[snip]
Click to expand...
Click to collapse
Holy crap, I have that EXACT same problem. I thought it was just the fact that my USB Wifi adapter is a piece if crap (which it is).
Just for reference, what kind is yours? Mine is a Belkin Wireless G F5D7050.
gtg465x said:
Just for reference, what kind is yours? Mine is a Belkin Wireless G F5D7050.
Click to expand...
Click to collapse
It's the Tenda 311U which is also a cheap piece of crap ($15 at Micro Center.) It doesn't look like they use the same chipset.
I've had the same issue as well. Hooking up the Captivate to the front USB ports disables my USB mouse (on the back). I'm not sure what it could be doing that would lock up the USB bus...
Using Windows 7 netbook
I finally got tired of it deciding and put in the mode to ask me when I connect. the problem i am having is when you just charge it, it does not know that it is just charging and wants to go to ysb mass storage or the other screen. also I use double twist to connect to the phone.
thanks
Jon
The best bet here is to use USB ports on the back of the computer.
Griffon23 said:
Hey all, I've had my Captivate now for afew days and I'm loving it, but today I ran across an issue that's driving me crazy.
For some reason when I connect it to my PC I'm not longer getting the Mount SD option on the phone and can't look at my files. I've enabled USB debugging and tried it. I've told it to come up as Mass Storage and tried it. I also told it to Ask when connected and it's still not working properly. The drives show up in Windows but cannot be accessed. I also no longer get the USB notification up in the notification bar.
The weird thing is sometimes if I restart the phone and connect it everything is fine, but then if I go to do it again nothing. Anyone have any suggestions?
Click to expand...
Click to collapse
If you're still having problems, select mass storage and connect the usb (or select ask every time and it will ask when you plug it in). To access the drive like a removable drive, you have to swipe the icon in the top right of the screen and select the usb selection. Then click mount and it should work! I had a hard time with this too and thought it wasn't very intuitive. Good luck!
joedoe said:
The best bet here is to use USB ports on the back of the computer.
Click to expand...
Click to collapse
Yep, strangely enough using the back ports worked. I'll have to see if a powered USB hub will work and then I guess we can conclude that it's a power issue.
mrbisme33 said:
If you're still having problems, select mass storage and connect the usb (or select ask every time and it will ask when you plug it in). To access the drive like a removable drive, you have to swipe the icon in the top right of the screen and select the usb selection. Then click mount and it should work! I had a hard time with this too and thought it wasn't very intuitive. Good luck!
Click to expand...
Click to collapse
I've set it to both Mass Storage and Ask every time and the problem I get is that I only get the USB icon up top sometimes, it's very rare. I've tried this on multiple ports and multiple PCs with the drivers downloaded and sometimes the notification shows up and I can select mount, but most of the time nothing is in my notification bar at all.
I love this phone but I don't understand why it's so frustrating just to connect it to a PC. I've also tried the Kies methods and it sees the phone, but doesn't let me access the files.
cellgeek said:
Interesting. I've been using ADW.Launcher and haven't see this problem except when I don't get the cable securely inserted into the Captivate. I even use a Nokia cable most of the time. The Kies Drivers are clearly the most stable. I downloaded the Drivers from the Captivate microsite and found they didn't support KIES, so I just reinstalled the KIES driver for MTP. Everything else works fine on W7x64.
++++UPDATE+++++ Validating MSHampton post
Well this sucks. On my Captivate, unless you are using TW.Launcher and in the idle screen, the Captivate won't launch MTP so you can connect to KIES. The USB Storage mode works with other Launchers (ADW and LaunchPro), but not KIES or Media. I didn't try PC Internet tethering. I switched between the two several times, and KIES only works with TW.Launcher on my device.
Is there anyone who knows of a Launcher OTHER than TW.Launcher that will interface with KIES so that the Captivate can connect? Or can ADW or LauncherPro be "tweaked" for the Captivate? I was just starting to like ADW.Launcher.
Click to expand...
Click to collapse
This just solved my kies and windows 7-64bit issue. This should be sticked advice or added to the wiki.
USB Setting no PC- Connection
I just got my AT&T captivate and I notice that under application,usb setting I don't have the PC-internet option in there. This is only what I have under USB setting:
Kies(Firmware update)
Media Player
Mass storage
Ask on connection
So, question is, how do I enable the pc-internet option? Any suggestion I really appreciate.
Sam
Hi all, Ive had my captivate for about a week now and have been playing with it, I've been all over the web trying to figure out why I can't sync it with my pc Ive tried both my laptop with windows 7 and my desktop running XP. Nothing will work ive downloaded the drivers from Samsung's site and kies and kies mini with no luck. No matter what i do it says device not recognized windows has stopped the device and nothing shows up on the phones screen it just shows its charging, I'm guessing its something I'm doing but i just don't know what. Once I had so much trouble I connected a Samsung flight to my PC that's running XP and it worked just fine. Can anyone help me out i want to root the captivate so i can get take off all this att crap!!!
Did you mount the phone after plugging it into your computer? You should pull down the notification bar and it should give you the option to copy files to/from computer.
Also, set you usb settings to mass storage. It's in settings...can't remember where on stock.
Sent from my SGH-I897 using XDA App
Yes I have put the phone in all the different usb settings debugging,media player, mass storage, ask on connection, kies. When I plug it in the only thing that changes on the phone screen is its showing its charging it doesn't give me any option to mount. The same cable will connect my old Flight phone and that phone transfers files just fine. This really has me stumped.
You downloaded and installed drivers from this site? http://www.samsung.com/us/support/downloads/SGH-I897ZKAATT
This may sound random and stupid but are you plugging into a USB that is directly connected to the motherboard (back of the computer)? If you're on a laptop there is no way to test this...basically, there was some issues before of people not having their computer recognize their phone and the issue was too low of power from the USB.
Hopefully someone else can chime in as well. I'm pretty new to this too so I can only think of fairly basic things.
after i rooted my phone, i pluged in my device into the computer and click mass storage. but it dosent show up on my computer. i havent changed anything on my computer so it could be something on the phone? would usb debugging make a difference cause i have that turned off?
is it the drivers are no longer on my computer?
rickyy00 said:
after i rooted my phone, i pluged in my device into the computer and click mass storage. but it dosent show up on my computer. i havent changed anything on my computer so it could be something on the phone? would usb debugging make a difference cause i have that turned off?
is it the drivers are no longer on my computer?
Click to expand...
Click to collapse
first thing, try rebooting your phone and computer. also make sure that your memory card is mounted (settings>sd and phone storage). secondly, are you SURE that the computer isnt recognizing it as a drive? Co to My Computer so you can see a list of available drives and see if its in there. Sometimes you wont get the popup on your screen.
Drivers normally wont just disappear unless there was some type of system error. You can also go into device manager and make sure that it shows up when the phone is plugged in. If that doesnt fix it to avoid a long drawn out troubleshooting thread, try picking a day before you rooted and go to system restore and select a recent restore point. If you do that and it still doesnt correct the problem, then it may be time to troubleshoot the phone
and USB debugging wont stop your computer mounting your phone as a drive. When you pull down the notifications panel once plugged in, you should still see the option to use a USB drive whether USB debugging is enabled or not
Thanks man yea I figured it out the system fixed the drivers so it connected
Sent from my SGH-T959V using XDA Premium App
Hello.
Short story: my phone was a little wet and i have some issues with it, mostly i want to get a mass storage to get working. (cant root)
Basically at first the phone didn't even want to charge, when i connected it to the PC windows was giving me an error that the device cannot be recognized, and couldn't install the drivers. (i had Kies installed)
I dried it completely, now the phone turns on without any problem, when i connect it to the pc the phone is recognizing connection (i hear sound + the button backlights are firing up for a sec)
Homever, windows is not detecting any USB device at all, and in about phone/info it says the phone is connected to the AC instead of USB.
When i connect it with USB there is no dropdown in notification to choose from charging, storage etc.
There is also manual usb storage mounting under settings/communication/usb settings , when i'm trying to mount here it just says to connect the phone with usb cable (not detecting connection, homever the backlight + sound is here after connecting, and it's charging)
I tried connecting it with usb debugging on/off even tried to fiddle with in service menu (*#7284#) but nothing.
And since i cannot get the usb storage working basically i cannot flash anything or root it.
Also the USB cable is not a Samsung but an HTC one, could this be a problem? (people in different thread said those cables are the same so it shouldnt be a problem, same amperage, same stick etc.)
Even tried to install MountUSB Widget from market, but it doesn't work when im trying to start the app it's force closing, when i make widget on desktop and press it the phone just vibrate for 1 sec and nothing happens.
When i connect phone with Kies AIR and it works, i mean it shows the storage information, also recognize the phone model correctly, how much free space i have on internal and on SD card but i cannot click "show in explorer" it's greyed out.
Any experts out there could help me? :crying:
Just a blind guess, try a USB cable which supports your device. If it doesn't help, I'm afraid it's a hardware problem and you will have to consult some hardware expert.