Okay I just recently Flashed CM6 Rc2, Everything was working fine. Then I noticed the Market started FC every time I tried to load it. I can't get it to open at all anymore. So I figured I would wipe and reflash, but I when I reboot and hold down HOME AND POWER it just stays stuck on the TMobile G1 Splash screen. But if I pull the battery out and put it back in, I can start up the phone again. Everything else works pretty good besides random things at times. Every now and then it will randomly restart. Also, I tried to factory wipe through the settings, and it just rebooted and then stuck on the G1 screen again.
Can anyone PLEASE help??
Try ADB? Or through the terminal? CMD, lol. I had the same problem with market, so i got tired of it. And flashed Cannon Complete Eclair, It works better than Froyo, and they aren't that much different.
Try using fastboot in the bootloader. That happened to me a couple of times with the Clockwork rom manager and going between roms.
1) Download another copy of the recovery img
2) Rename it something simple like recovery.img
3) boot into the bootloader (Camera + Power)
4) open a command prompt navigate to the directory that you have the image in
5) run this command without the quotes "fastboot flash recovery recovery.img" (if you didn't name it recovery.img then substitute the name you chose)
Hopefully that works for you.
**If you don't have the sdk tools files (adb.exe..., fastboot.exe) copied into your /system32 folder like I do then you will need to put the new copy of your recovery.img into the sdk tools folder and navigate there in the command prompt, coping them into the /system32 folder lets use them regardless of the directory that you are workin.
I had a similar problem like this a few days ago where I couldn't load up my recovery so I used the method similar to the post above me. After searching for just trying stuff I was able to learn how to use adb on my own (where was ya post when i needed it roadmasta01 lol)
But I think I did almost he same steps he took except I loaded into fastboot by holding the back button and the power button and I erased the old recovery before flashing the recovery again.(fastboot recovery erase)
I too used a similar process Roadmasta01 and biglo used. I had a buddy that had the exact same problem today. His G1 was progressively getting worse ... pretty soon everything would FC and he couldnt get it to the boot loader and then it just wouldnt boot past teh G1 logo.
Booted the G1 into fastboot
downloaded the latest clockwork recovery image from koush's site and saved it to the folder location adb and fastboot are located in the sdk.
fastboot erase recovery
fastboot flash recovery <recovery you downloaded.img>
rebooted and al was well again.
biglo said:
I had a similar problem like this a few days ago where I couldn't load up my recovery so I used the method similar to the post above me. After searching for just trying stuff I was able to learn how to use adb on my own (where was ya post when i needed it roadmasta01 lol)
But I think I did almost he same steps he took except I loaded into fastboot by holding the back button and the power button and I erased the old recovery before flashing the recovery again.(fastboot recovery erase)
Click to expand...
Click to collapse
Sorry homie, just happened to see this thread. Besides I still consider myself a novice at this stuff, I am usually able to pull my butt out of the fire; Except for when I took my phone completely apart to replace the housing and android.process.acore started to FCing whenever I tried to call somebody or received a call. That was frustrating as all get out, everything but the actual phone worked on my phone. On top of that I tore the ribbon for the digitizer when I replaced my housing so when I tried wiping and flashing a different ROM to try to fix it, I could do the whole "touch the android to start" thing. I eventually fixed the FC issue by flashing the dreaimg.nbh file and just starting over from scratch. ezterry helped me with that issue and he was very patient. I realize you didn't ask and you were joking, but I starting into a background ramble and I had to finish it.
Roadmasta01 said:
Sorry homie, just happened to see this thread. Besides I still consider myself a novice at this stuff, I am usually able to pull my butt out of the fire; Except for when I took my phone completely apart to replace the housing and android.process.acore started to FCing whenever I tried to call somebody or received a call. That was frustrating as all get out, everything but the actual phone worked on my phone. On top of that I tore the ribbon for the digitizer when I replaced my housing so when I tried wiping and flashing a different ROM to try to fix it, I could do the whole "touch the android to start" thing. I eventually fixed the FC issue by flashing the dreaimg.nbh file and just starting over from scratch. ezterry helped me with that issue and he was very patient. I realize you didn't ask and you were joking, but I starting into a background ramble and I had to finish it.
Click to expand...
Click to collapse
Its kool man its always good to hear about users with different experiences on things they try in case we run into that same problem. I'm juust like you I try to figure things out myself before I resort to posting on how to because I know most answers are already out there.
Guys, thanks to this thread, I was able to bring my G1 back from the brink. This morning it reset itself and froze at the G1 screen no matter what I did. Pulling the battery and rebooting... nothing. Plugging it to a charger when starting...nothing. I thought it was done for since I couldn't access the recovery section.
Something mine was doing that I didn't see mentioned above is that if I went into the HBOOT/Fastboot screen (camera/power held to startup), it would freeze at that screen after just a couple of seconds. Once I got adb up and running, it wouldn't even find the phone at first. After playing with it for a few minutes, I noticed that I had, literally, about 3 seconds of time that it would register seeing the G1 at the fastboot terminal screen. I took a chance and set up the command line to reflash the recovery, rebooted to flashboot, and plugged in the USB. As soon as the screen showed that it saw my phone, I hit enter. Luckily, it transferred the new recovery .img in time and I was able to bring it back to life. DAMN...
Anyway, thanks again to you fellas!
reese.leblanc said:
Guys, thanks to this thread, I was able to bring my G1 back from the brink. This morning it reset itself and froze at the G1 screen no matter what I did. Pulling the battery and rebooting... nothing. Plugging it to a charger when starting...nothing. I thought it was done for since I couldn't access the recovery section.
Something mine was doing that I didn't see mentioned above is that if I went into the HBOOT/Fastboot screen (camera/power held to startup), it would freeze at that screen after just a couple of seconds. Once I got adb up and running, it wouldn't even find the phone at first. After playing with it for a few minutes, I noticed that I had, literally, about 3 seconds of time that it would register seeing the G1 at the fastboot terminal screen. I took a chance and set up the command line to reflash the recovery, rebooted to flashboot, and plugged in the USB. As soon as the screen showed that it saw my phone, I hit enter. Luckily, it transferred the new recovery .img in time and I was able to bring it back to life. DAMN...
Anyway, thanks again to you fellas!
Click to expand...
Click to collapse
Good job thinking on your feet!!
i`m having kind of the same problem with my G1 it won't boot all of a sudden and when i try to enter recovery mode it freezez at " Build : " once after about 5-10 minutes it loaded the recovery menu but nothing was working it was extremely slow ... i tried the options above to erase and reflash the recovery.img but it just won't work it does the same thing ... anyone have a solution ? ...
reese.leblanc said:
Guys, thanks to this thread, I was able to bring my G1 back from the brink. This morning it reset itself and froze at the G1 screen no matter what I did. Pulling the battery and rebooting... nothing. Plugging it to a charger when starting...nothing. I thought it was done for since I couldn't access the recovery section.
Something mine was doing that I didn't see mentioned above is that if I went into the HBOOT/Fastboot screen (camera/power held to startup), it would freeze at that screen after just a couple of seconds. Once I got adb up and running, it wouldn't even find the phone at first. After playing with it for a few minutes, I noticed that I had, literally, about 3 seconds of time that it would register seeing the G1 at the fastboot terminal screen. I took a chance and set up the command line to reflash the recovery, rebooted to flashboot, and plugged in the USB. As soon as the screen showed that it saw my phone, I hit enter. Luckily, it transferred the new recovery .img in time and I was able to bring it back to life. DAMN...
Anyway, thanks again to you fellas!
Click to expand...
Click to collapse
Lol I'm glad my problem helped ya out. I actually ended up fixing it myself luckily enough. But thanks to all who posted responses
Sent from my HTC Vision using XDA
Related
I had a Vibrant before and flashed it constantly. I soft bricked it several time and it was easy just to Odin back to stock and try again. Before I begin to flash Roms on this phone I would like to know how one would fix a bricked Nexus S. I searched "bricked Nexus S" and didn't come up with much.
Sent from my Nexus S using XDA App
Flash a stock img thru fastboot/adb. Just as painless as Odin was if not easier.
Sent from my Nexus S
Yeah I figured that much but I have never used ADB before. What are the commands to flash a stock img and where can I get a stock img? I already have ADB set up, serial # comes up when I enter - adb devices. I'm ready to root and flash but I want to be prepared for anything. I don't want to panic for ten minutes like I did the first time I bricked my Vibrant.
Sent from my Nexus S using XDA App
You should be able to snag a stock image from the development section. As far as what adb commands to use check out any of the root tutorials in development.
Sent from my Nexus S
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
leyvatron said:
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
Click to expand...
Click to collapse
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
kenvan19 said:
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
Click to expand...
Click to collapse
Coolest wife ever? haha
risegeek said:
Coolest wife ever? haha
Click to expand...
Click to collapse
hehe why'd'ya think I married her
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
not enough information is present. you can attempt to get into bootloader / recovery, plug USB to the computer. When plugged, does the computer make a plugged in noise? if it does.. try turning it on, try using adb on it, etc.
as a last resort: if its not rooted or modified in any way, you can go back to best buy and exchange it since you said you've only had it for 3 days
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
First thing to do is pull the battery, let it sit a minute or two, then put the battery back in and try to boot.
Also, try booting into recovery or fastboot. With power off, press and hold volume up button, then press/hold power on switch. You should enter fastboot mode. From fastboot menu, select boot to recovery. The phone will reboot and you'll get to a screen with an "!" and an android robot on it. At that point you press hold power, then press/hold volume up (make note that this is the reverse of what you did earlier).
Once in Recovery, try wiping cache from the menu.
Reboot.
If still no good, then repeat the process but pick factory reset/wipe from the menu in recovery. Note that this will wipe all personal data and apps off the phone but it won't touch your sdcard contents.
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Van_Dyke said:
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Click to expand...
Click to collapse
Last option is to try to trick it into Samsung's Download Mode (see the Odin thread in Development section), but if the keys aren't recognized you can't soft boot into it so you'll need a dongle with a resistor to get there.
Sounds like it's truly a brick at this point. You'll probably have to return it, but I'm concerned about returning a phone that has your personal data on it without being able to wipe it. Doesn't seem like much way around that at this point if you can't get fastboot or download.
get the 301k resistor JIG and then you can go into the download mode even without the 2 keys + usb plug
you can always make your own JIG if you have the materials at home or a nearby Radio shack
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
That's pretty scary that it wouldnt take a charge if run down completelty. But hey handy to know incase it happens to any of us,
If you get any repeat i would take it back to get a fresh battery of course (only right to do so).
here's hoping you never need to though
Van_Dyke said:
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
Click to expand...
Click to collapse
That is scary......
Sent from my Nexus S using XDA App
Bricked
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Noob {MAC User}... Please be gentle
Greetings Everyone,
Okay, so I endeavoured to root my phone last night and was successful. I ran into trouble when the clockwork recovery and superuser permissions kept getting removed each time I reboot.
Now, I'm at the Google splash screen with no way to move forward. I'm a mac user and I don't really get the adb thing. Got adb to work with mac from a youtube video, but still not sure what commands to run.
What I've done so far:
- wiped cache
- wiped/factory data reset
- retraced my steps by using terminal to setup superuser permission from this post (http://forum.xda-developers.com/showthread.php?t=927838)
What I think:
- maybe in all of my clicks I removed the ROM, so the phone doesn't have a ROM to work with.
This maybe a really infantile conclusion, but I know there's a solution (had a rooted G1 that I flashed all the time and thought I bricked once but was able to get it back to stock).
Eagerly waiting for a reply... no cell phone if this can't be fixed.
Tamara
warrenb said:
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Click to expand...
Click to collapse
It would be easier to help you if we knew exactly what you did that caused the problem. You said you tried to unlock it...you mean fastboot oem unlock or something else?
If you can get into fastboot, you're not totally lost, but the computer needs to see the phone to do it.
I'm working in a vacuum here on what your real problem is, but without further details, the things you can try are boot into recovery (from the fastboot mode select boot recovery)...if you're stock recovery, press/hold power, then volume up once you see the android "!". From there wipe cache and whatever else it will let you wipe. Try rebooting. IF that didn't work go back to recovery and try a factory reset of the phone (will delete all your apps and stuff on the phone, but not on the sdcard (pics and stuff).
If none of that works, you can still try getting Clockwork recovery on the phone via fastboot. Boot phone to fastboot and then on computer type the command "fastboot flash recovery <put file name of recovery version you're flashing here>"
Once in clockwork, you should have access to adb via the computer. On your computer go to the Development section here and download any of the various nandroid images posted there. Now you use clockwork mounts and storage menu to mount the sdcard. Then use adb to "adb push <insert path and filename of your nandroid image here> /sdcard"
Unmount the sdcard with the clockwork mounts and storage menu. Now go to the backup menu, select advanced restore and find the nandroid image and restore it.
With any luck, you should be able to boot into a fresh phone.
Hey guys I was having some problems with my xoom's wifi on Tiamat's 1.4.4 so i decided to relock the device and use stock.
It's a US model and had build HMJ37 but i decided to follow this thread
http://www.xoomforums.com/forum/mot...4600-thinking-about-unrooting-read-first.html
I downloaded img build HRI66 and followed all the steps and it was ok. Then, i rebooted and now my device is at the motorola logo's dual core screen. Everytime i manually reboot with power and volume up it automatically reboots the device instead of shutting it down, it literally won't shut down and keeps hanging at the moto logo. It just keeps rebooting and getting stuck at the motorola logo. I then unlocked again, and performed the same process with the HRI39 img and still got the same problem
So im stuck. Please help me out guys, i'm in serious ****.
So you have gone as far as the "fastboot erase cache" and "fastboot oem lock" right? This is kind of funny because I tried to install Tiamat 1.1 ROM tonight and ended up going through this HUGE loop of problems.
Here's the problem I had: some time ago I installed ROMManager from the market. I thought it would be easier. It SHOULD be easier. I let it update my recovery to its own version 4.something. It allowed me to SORT OF install the ROM, but I wound up with some persistent system files that weren't getting wiped and a bcm4329.ko version mismatch.
This stumped me for a long time because all I could see was an "Error" message where I was supposed to be able to toggle the wifi on and off. I tried rolling back to my previous ROM. No go. And the culprit the whole time was ROMManager's CWM.
I tried rolling back my recovery.img file to the Tiamat version recommended in this forum. I kept getting all of these crazy "could not mount" errors for pretty much EVERYTHING. I thought my recovery partition was effed. So I rolled back to stock. Followed pretty much the same instructions you linked to.
From there I was able to boot into the stock OS. WiFi worked. I breathed deeply for a minute or two then dove right back in.
If I was in your position I would (and I did, though not from a boot loop) boot into fastboot and unlock the bootloader again. You can do it by holding the Vol down key as the device boots. When fastboot loads type "fastboot oem unlock". Press the Vol down key then the Vol up key. Do that again. Your device is unlocked now! Hooray!
Now you need to install a recovery.img. (I just did this too.) Get the .img file here: http://forum.xda-developers.com/showthread.php?t=1074979
Boot into fastboot again. Put the recovery img file you downloaded into the same directory as your adb and fastboot executables (if you haven't already linked to them in your PATH). Type "fastboot flash recovery recovery-lotsofstuffhere.img". Type "fastboot reboot". 2 seconds after the Motorola logo pops up press the Vol Down key. Then press the Vol Up key to enter recovery.
Ok, here's where I found out what a dumbass I was. I got all of the stupid "can't mount anything" errors again. I thought, HOLY ****. I just did all of that work, spent hours troubleshooting and reformatting and bringing it back to stock and flashing the custom recovery all over again just to run into the SAME error. I really thought I was screwed. Then I found some forum where a guy was complaining about the same error. He realized he was getting it because his sd card was half-way out. I thought - "SD CARD?!?" Some guys told me I needed one earlier too, but the ROMManager CWM didn't require it. It just screwed up my system files. So I popped one in and rebooted. Voila. Everything's kosher. If YOU have the same problem, make sure you've got an SD card in.
Ok, so now you're in recovery. You'll need to flash an OS of course. If you haven't already got it, get Tiamat 1.1 rom. Put it on the sd card. Wipe data/factory reset. Install zip from sd card. You're golden. At least I was. 5 hours later.
-Mike
Hey Mike I'm gonna give this a go. Just when i downloaded the img file to flash through fastboot i got an error saying battery was too lower to perform the recovery....damn it! The xoom isn't able to charge at the moment so i have to wait until it dies i guess (or i hope at least) and then charge it up and try again later.
Thanks again dude, hope i sort this out too. I'll download tiamat 1.1 in the meantime.
DUDE YOU'RE MY ****ING HERO!!!! I got it running can't say if everything is 100% just yet but the fac tthat im back in is enough to thank you so very much Mike!!! What a guy!
It worked? Great that's excellent news. Just out of curiosity - did you get there because you had ROMManager's ClockWorkMod? Or maybe you didn't do a full wipe before flashing a new rom? Or maybe you restored some WiFi settings with Titanium Backup after a new flash? How did you wind up with tthe problem in the first place - you know, for posterity.
well to be honest i am not 100% sure. I think the source of the problem msut have come from my previous installation of tiamat's 1.4.4 rom, it was always actin up on me and i don't believe i wiped the mod before i updated it and that may have done it. I wish i could give you more than just a pseudo answer.
DeeJayCruiser said:
Hey Mike I'm gonna give this a go. Just when i downloaded the img file to flash through fastboot i got an error saying battery was too lower to perform the recovery....damn it! The xoom isn't able to charge at the moment so i have to wait until it dies i guess (or i hope at least) and then charge it up and try again later.
Thanks again dude, hope i sort this out too. I'll download tiamat 1.1 in the meantime.
Click to expand...
Click to collapse
This is why they say to make sure you're plugged in when doing this important stuff, lol.
okantomi said:
This is why they say to make sure you're plugged in when doing this important stuff, lol.
Click to expand...
Click to collapse
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
DeeJayCruiser said:
Everytime i manually reboot with power and volume up it automatically reboots the device instead of shutting it down, it literally won't shut down and keeps hanging at the moto logo.
Click to expand...
Click to collapse
farmsatguy said:
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
Click to expand...
Click to collapse
You are right...I had forgotten that from the OP. Very strange indeed.
Yeah I dunno why, my xoom was just acting up. It's fantastic now, albeit the wifi still has a couple kinks but android market issues have been resolved, i get much better streams and with tiamat 1.1 everything is already built in and with a quickboot option =)
Xda...where would i be without you!
farmsatguy said:
Normally, I'd agree but in this rare case, he actually needed it to fully drain because he couldn't get it to power off using any normal method. Weird! so, it seems his only shot was to let it die to finally kill the screen and then start over. Very odd...
From original post
Click to expand...
Click to collapse
You should be able to reboot the device using vol up + power, then holding vol down and vol up until it says "Cold booting Linux.....".
This should do the same as letting the battery drain, plugging it in and turning it on.
DeeJay - dunno if you've done this already, but if you haven't you should go back to the Tiamat 1.1 thread and find the Modpack. It fixes the Market update issue and gives you built-in screenshot capabilities and an option to reboot into recovery from the power off menu. It's in there - you just have to scroll down a bit before you find it.
Also - what issues are you having with WiFi?
Thanks for that important tidbit, solarnz. I'm going to file it away for future use.
OMG!!!! Dude you just saved my life! I thought my baby was out the window. I had the exact same problem as you did. I was trying everything from every thread that had anything to do with this problem. I just finished installing and it booted. WHEWWW!!!
Thank u thank u thank u!!
Glad it helped. I'm seeing all kinds of posts in here about the ROMManager CWM. Not good.
Sent from my Xoom using Tapatalk
I'm here, requesting help, i've read (i think) almost everything. Try everything and i'm not able to recover my G2x.
I'm from mexico, and my english it's no so good, i hope that everyone can understand what i'm trying to say U_U
I brought a used T-Mobile G2x from ebay. I was SOOO happy with the phone, a good one, a kickass and it was about $250 dlls for me. I think that was a good deal. The phone was on a average/good condition.
So, i rooted it, then after, moved the rom from stock to CM7 stable.
I changed then to eaglesblood ICS, then another eaglesblood, and then again CM7.
The phone was working very good. Then, a issue appeared.
Some day, the phone was a little slow, then i rebooted it. And then started the pain...
The screen showed the LG Logo, white brilliant. And after a seconds, power off. What!?
I tried to power on again. Nothing. I did the battery pull and then worked fine. I thought that was a simple bug or something.
Later, the phone ran out of energy. I pluged on the wall charger but nothing happened. I left it for an hour and tried to turn it on. Nothing...
Then charged the battery with a multicharger and the same problem. LG Logo, nothing. Checked on the CWM Recovery and did a cleanup of battery stats, nothing. I was desperate, so i've flashed my phone with Eaglesblood again. Vuala, the phone worked... 'till froze and i had to pull the battery... Again, LG Logo... nothing.
The phone boot up by himself after leaving it for an hour or more. But i had another problem... Battery at 999% Or battery stuck at 32% and suddenly dies...
I've checked with the battery app and saw that the battery said 0 mV
I have 2 batteries, and the both with the same problem. One LG, one chinese.
So, i went with a friend of mine, i took borrowed a battery of his LGO3D, and... nothing
The phone works with APX, powers on on the recovery, i even sometimes reads ok the battery and the phone comes alive, 'till i have to reboot it because the phone is so slow after 2 or 3 weeks without a reboot... but it's so rare and random...
I even updated the phone with the 21y baseband and the new stock rom, but keeps doing the same thing...
I'm just at the point that i want to throw the phone to the wall...
There are something that i can do?
Change some piece?
I must say that when the phone read the battery and it's ok, i can charge it normally, works perfectly, usb ok, everything it's like nothing was bad. But the problem is if the phone shut's down...
Get adb working with USB and if using a windows pc open Command Prompt and run
HTML:
adb devices
....Make sure your device is found, an ID number will appear if successful....
HTML:
adb reboot
....Let the phone start rebooting. When "adb devices" works and shows the phone ID again proceed...
HTML:
adb shell
$ su
# dmesg > /sdcard/dmesg.txt
# logcat -v time -d > /sdcard/logcat.txt
# exit
$ exit
adb pull /sdcard/logcat.txt %USERPROFILE%\Desktop\logcat.txt
adb pull /sdcard/dmesg.txt %USERPROFILE%\Desktop\dmesg.txt
exit
If you get a complaint with those last 2 commands; change %USERPROFILE% = whatever your username is where your Desktop is located. (i.e. C:\Users\me\Desktop\dmesg.txt)
Then either email them to me or post them on www.pastebin.com and post links to both files.
I'm a little lost...
First of All! Thanks for the help
And i dont know... The phone must be ON to do that?
The phone right now doesn't power on, just the LG Logo, at this point, when i attach to a computer via USB Cable, the computer doesn't detect anything...
I can enter the CWM Recovery, it's enough??
And a funny thing: The phone NEVER powers ON (Not even the LG LOGO) when usb or charger it's connected.
EDIT:
Good news, i've got adb working, but i don't have su, i'm downloading it thanks
EDIT AGAIN
The last time that i've flashed to stock rom the g2x forgot to root the phone
i've already tried with adb commands, but i got errors when i try...
I guess that i need usb debugging On, and i doesn't have it...
I'm on a dead end??
Go to the ROM for recovery thread in development section, follow it step by step and your phone will be 100% alive and kicking on GB 2.3.4.
Sent from my SPH-D710 using xda premium
supertaco said:
First of All! Thanks for the help
And i dont know... The phone must be ON to do that?
The phone right now doesn't power on, just the LG Logo, at this point, when i attach to a computer via USB Cable, the computer doesn't detect anything...
I can enter the CWM Recovery, it's enough??
And a funny thing: The phone NEVER powers ON (Not even the LG LOGO) when usb or charger it's connected.
EDIT:
Good news, i've got adb working, but i don't have su, i'm downloading it thanks
EDIT AGAIN
The last time that i've flashed to stock rom the g2x forgot to root the phone
i've already tried with adb commands, but i got errors when i try...
I guess that i need usb debugging On, and i doesn't have it...
I'm on a dead end??
Click to expand...
Click to collapse
If I recall you were the one who emailed me and I sent you links to NVFlash correct? Did that work for you? I'm just trying to see what your question really is. It sounded from you OP that the hardware perhaps keeps failing and no matter which ROM you flash, you eventually get stuck in bootloop like you are now. Are you just trying to get out of bootloop or is this a reocurring problem? If your stuck in bootloop then your only solution is to NVFlash a recovery and push a rom. If its reocurring then we gotta figure out why... thats where my instructions come in. So you need to tell us exactly what you're trying to do.
As for adb yes you can adb from recovery. You gotta go to Mounts and storage > Mount /system though or else the device wont show.
oOo B0XeR oOo said:
If I recall you were the one who emailed me and I sent you links to NVFlash correct? Did that work for you? I'm just trying to see what your question really is. It sounded from you OP that the hardware perhaps keeps failing and no matter which ROM you flash, you eventually get stuck in bootloop like you are now. Are you just trying to get out of bootloop or is this a reocurring problem? If your stuck in bootloop then your only solution is to NVFlash a recovery and push a rom. If its reocurring then we gotta figure out why... thats where my instructions come in. So you need to tell us exactly what you're trying to do.
As for adb yes you can adb from recovery. You gotta go to Mounts and storage > Mount /system though or else the device wont show.
Click to expand...
Click to collapse
Ok... my first problem: Language. I don't have problem with the reading, but writing... i'll try to put my words on the right place
I don't remember, when i first flashed my G2x i did it with the Rom Manager App... the result came on a bootloop. Then i used NVFlash and flashed a correct ClockworkMod Recovery. Installed CM7 and everything was fine. Then i wanted to try ICS and flashed it again. No problem. I normally follow the guides step by step, and the phone was right. Then, one day the phone froze and was the first time that i had the bootloop with the LG Bright Logo, then dim, and then power off.
The problem not was while i was flashing a rom. Because while i was on the problem, i flashed with NVFlash the original bootloader and then restore the original firmware, and the problem still there. Right now the phone has the stock rom, updated by the LG utility, and the problem persists.
I think that is what you say. The phone doesn't pass the LG Logo screen no matter which rom i flash... What i don't understand is that the phone seems to be ok. When it powers (a week ago) it worked just fine...
I don't think that is a bootloop caused by a bad flashing... i think that is a recurring problem...
I have this 2 folders with tools for the NVFlash, i think that the both of them are right...
One-Click-G2x-recovery-flasher-04-28-12 [Folder]
One-Click-G2x-recovery-flasher-09-23 [Folder]
They have the APX drivers and NVFlash and the One-click-G2xr-recovery-flasher app...
I'll mount the /system in recovery and i will try to get that log. With the /system mounted then i think that i can root the phone...
I'm gonna try... let's see what happen...
Thanks
EDIT: I noticed (when the problem first came) that the sticker of water damage was ripped off... is not there... But i don't know if the phone was really damaged by water, because i'm not the first owner... The phone was working fine for about 6 months and now it's just like i'm explaining...
supertaco said:
Ok... my first problem: Language. I don't have problem with the reading, but writing... i'll try to put my words on the right place
I don't remember, when i first flashed my G2x i did it with the Rom Manager App... the result came on a bootloop. Then i used NVFlash and flashed a correct ClockworkMod Recovery. Installed CM7 and everything was fine. Then i wanted to try ICS and flashed it again. No problem. I normally follow the guides step by step, and the phone was right. Then, one day the phone froze and was the first time that i had the bootloop with the LG Bright Logo, then dim, and then power off.
The problem not was while i was flashing a rom. Because while i was on the problem, i flashed with NVFlash the original bootloader and then restore the original firmware, and the problem still there. Right now the phone has the stock rom, updated by the LG utility, and the problem persists.
I think that is what you say. The phone doesn't pass the LG Logo screen no matter which rom i flash... What i don't understand is that the phone seems to be ok. When it powers (a week ago) it worked just fine...
I don't think that is a bootloop caused by a bad flashing... i think that is a recurring problem...
I have this 2 folders with tools for the NVFlash, i think that the both of them are right...
One-Click-G2x-recovery-flasher-04-28-12 [Folder]
One-Click-G2x-recovery-flasher-09-23 [Folder]
They have the APX drivers and NVFlash and the One-click-G2xr-recovery-flasher app...
I'll mount the /system in recovery and i will try to get that log. With the /system mounted then i think that i can root the phone...
I'm gonna try... let's see what happen...
Thanks
EDIT: I noticed (when the problem first came) that the sticker of water damage was ripped off... is not there... But i don't know if the phone was really damaged by water, because i'm not the first owner... The phone was working fine for about 6 months and now it's just like i'm explaining...
Click to expand...
Click to collapse
Ok, I bet your partition tables are messed up. If you can get that dmesg and logcat file it would be ideal but if you cant then we just gotta move forward.
First copy all your stuff from SDcard and internal memory into a folder on a PC. Make a backup using clockwork or whatever and also copy that onto a PC just to be safe.
Then you need to search the G2x forum for this batch utility called something like "auto-formatter partition repair tool" or something similar. If you cant find it message me.
Youll want to run that first, its going to completely wipe all of your stuff and reformat the blocks sizes. Once done youll need to NVFlash a CWM recovery again. Then push a ROM over to the phone and install with CWM. (Dont push a stock rom or anything Gingerbread. Ideally push EaglesBlood ICS since I know it works and can help you troubleshoot.
So i would do that first because i bet your upgrade when u said you attempted to install ICS corrupted the file system, which can happen if you dont format /system prior.
Get the utility, backup everything , format the partitions, NVflash CWM recovery, push ICS rom, install, install GAPPS, come back here and tell me it worked
oOo B0XeR oOo said:
Ok, I bet your partition tables are messed up. If you can get that dmesg and logcat file it would be ideal but if you cant then we just gotta move forward.
First copy all your stuff from SDcard and internal memory into a folder on a PC. Make a backup using clockwork or whatever and also copy that onto a PC just to be safe.
Then you need to search the G2x forum for this batch utility called something like "auto-formatter partition repair tool" or something similar. If you cant find it message me.
Youll want to run that first, its going to completely wipe all of your stuff and reformat the blocks sizes. Once done youll need to NVFlash a CWM recovery again. Then push a ROM over to the phone and install with CWM. (Dont push a stock rom or anything Gingerbread. Ideally push EaglesBlood ICS since I know it works and can help you troubleshoot.
So i would do that first because i bet your upgrade when u said you attempted to install ICS corrupted the file system, which can happen if you dont format /system prior.
Get the utility, backup everything , format the partitions, NVflash CWM recovery, push ICS rom, install, install GAPPS, come back here and tell me it worked
Click to expand...
Click to collapse
It's a shame that i cannot get that logcat... :/
Well... i have nothing to lose (data, or something), so i searched over the forums and i found this utility:
Code:
[URL="http://forum.xda-developers.com/showthread.php?t=1590523"]http://forum.xda-developers.com/showthread.php?t=1590523[/URL]
I think thats the right one, or at least, one of many...
That utility flashes a CWM Touch, then, i installed Eaglesblood Gingerbread (because the utility said that if i don't, the sdcard will not be recognized) and the gaaps...
Turned off the phone...
Turned On...
But then again, i have the LG logo bright, then dim, then power off :/
Do you think that could be a charger flex problem? Motherboard? I should burn it?? :/
Use the batch cleanup tool, then flash stock rooted ROM. That way you cab make sure something works, and stock is going to be the safest flash. If that works, then you can go on to custom Roms
Sent from my LG-P999 using xda premium
supertaco said:
It's a shame that i cannot get that logcat... :/
Well... i have nothing to lose (data, or something), so i searched over the forums and i found this utility:
Code:
[URL="http://forum.xda-developers.com/showthread.php?t=1590523"]http://forum.xda-developers.com/showthread.php?t=1590523[/URL]
I think thats the right one, or at least, one of many...
That utility flashes a CWM Touch, then, i installed Eaglesblood Gingerbread (because the utility said that if i don't, the sdcard will not be recognized) and the gaaps...
Turned off the phone...
Turned On...
But then again, i have the LG logo bright, then dim, then power off :/
Do you think that could be a charger flex problem? Motherboard? I should burn it?? :/
Click to expand...
Click to collapse
Yes thats the utility, and the post above by "rtotheichie" is correct too.
You cant flash a Gingerbread ROM. You need to either push a stock/rooted build, or an ICS build. It's that gingerbread -to- ICS thats causing the partition problem (if it even is that). So what you're doing is fixing it then messing it up again.
--> There could be any number of things going on and we can guess at anything but what good is that gonna do? ... You NEED to get that #dmesg log. I would focus on doing whatever you can to get ADB working because thats going to tell us exactly what is failing at boot time. Can you get into Recovery? I wouldn't even worry about starting the ROM, you should focus on getting into Recovery first. If you cant get into Recovery then you didn't flash it correctly with NVFlash. If you can get in, then go to Mounts & Storage > mount /system ...then get that ADB going using my 1st post above. Thats your only hope if you cant get it on your own.
oOo B0XeR oOo said:
Yes thats the utility, and the post above by "rtotheichie" is correct too.
You cant flash a Gingerbread ROM. You need to either push a stock/rooted build, or an ICS build. It's that gingerbread -to- ICS thats causing the partition problem (if it even is that). So what you're doing is fixing it then messing it up again.
--> There could be any number of things going on and we can guess at anything but what good is that gonna do? ... You NEED to get that #dmesg log. I would focus on doing whatever you can to get ADB working because thats going to tell us exactly what is failing at boot time. Can you get into Recovery? I wouldn't even worry about starting the ROM, you should focus on getting into Recovery first. If you cant get into Recovery then you didn't flash it correctly with NVFlash. If you can get in, then go to Mounts & Storage > mount /system ...then get that ADB going using my 1st post above. Thats your only hope if you cant get it on your own.
Click to expand...
Click to collapse
Well, i have no problems with recovery. Never had IT. But the last time i tried to use the commands failed... I'll post a video, maybe that will be more self explaining... I really appreciate that you take a time for helping me thanks
supertaco said:
Well, i have no problems with recovery. Never had IT. But the last time i tried to use the commands failed... I'll post a video, maybe that will be more self explaining... I really appreciate that you take a time for helping me thanks
Click to expand...
Click to collapse
No problem.
Well if you can get into recovery and if you have ADB and the drivers for the phone setup on your PC you should have no problems connecting. Try using a Windows PC if you can, it's funny but ADB is probably the only thing that is easier to get going the 1st time in Windows rather than Linux (Ubuntu).
Just keep trying and run
HTML:
$ adb devices
each time until a device ID shows up.
I've noticed you've posted this same question on like every single Android website that exists; but I'm telling you what the correct answer is and the only way you're going to be able to figure out what is going on is to get to a log file. No one has a magic trick that will automagically fix this from afar. Anything else is just guessing and checking.
In recovery, try going to Advanced > Show log ...what does that say? Also it won't hurt to try going to Advanced > Fix permissions. I doubt that will do anything for you but it won't hurt to try at this point.
oOo B0XeR oOo said:
No problem.
Well if you can get into recovery and if you have ADB and the drivers for the phone setup on your PC you should have no problems connecting. Try using a Windows PC if you can, it's funny but ADB is probably the only thing that is easier to get going the 1st time in Windows rather than Linux (Ubuntu).
Just keep trying and run
HTML:
$ adb devices
each time until a device ID shows up.
I've noticed you've posted this same question on like every single Android website that exists; but I'm telling you what the correct answer is and the only way you're going to be able to figure out what is going on is to get to a log file. No one has a magic trick that will automagically fix this from afar. Anything else is just guessing and checking.
In recovery, try going to Advanced > Show log ...what does that say? Also it won't hurt to try going to Advanced > Fix permissions. I doubt that will do anything for you but it won't hurt to try at this point.
Click to expand...
Click to collapse
I'll try that, today
And i know that aint no magic trick that fix my phone... I'll try everything to resolve the problem.
Thanks...
And another thing. I've checked my PM's, and saw that i've never send a PM to you. And no, i'm not flooding the entire www with my question. But i think that i should have used a diferent question to describe my problem. This is the first time that i ask for help, after reading and reading on the web, and almost everyone says: "send it back to t-mobile", but that's not an option for me. And my first choice (and olny) for asking help of course it's xda.
I remember that once clicked "show log" and an error pop out, but i didn't try the fix permissions options.
This is the video. Sorry for my bad english.
Video
supertaco said:
I'll try that, today
And i know that aint no magic trick that fix my phone... I'll try everything to resolve the problem.
Thanks...
And another thing. I've checked my PM's, and saw that i've never send a PM to you. And no, i'm not flooding the entire www with my question. But i think that i should have used a diferent question to describe my problem. This is the first time that i ask for help, after reading and reading on the web, and almost everyone says: "send it back to t-mobile", but that's not an option for me. And my first choice (and olny) for asking help of course it's xda.
I remember that once clicked "show log" and an error pop out, but i didn't try the fix permissions options.
This is the video. Sorry for my bad english.
Video
Click to expand...
Click to collapse
I saw the video.
Take out the battery > then put it back in.
Press and hold BOTH the [Power] and [Volume Down-] at the same time and keep holding them.
Keep them both pressed while the "LG logo" appears; shortly after you should see the white logo change to a BLUE logo... once you see that you can let go.
Does that work and get you into Recovery? ...let me know.
One other thing to try...
Plug your USB cable into the Computer ONLY ---Not the phone.
Take out the battery, do NOT put it back in.
Now (with the battery still removed), Press and Hold [Volume Up+] and [Volume Down-] together. Do not press the Power button.
While still holding both Volume buttons together, insert the USB cable into the phone.
Now wait a second or two, does the phone Power On into a "Download mode screen"?
If not, let go of the Volume buttons and unplug the USB from the phone.
Now plug the USB back into the phone. Press and hold the [POWER] Button for several seconds (still with NO battery in, just the USB).
Does that turn the phone on?
P.S. - This might be good to have as well:
User manual (Spanish): http://www.lg.com/us/products/documents/LG-G2x-UserGuide_ES.pdf
Service Repair Manual (English): http://www.mediafire.com/view/?cscdjc6p08t2omq
oOo B0XeR oOo said:
I saw the video.
Take out the battery > then put it back in.
Press and hold BOTH the [Power] and [Volume Down-] at the same time and keep holding them.
Keep them both pressed while the "LG logo" appears; shortly after you should see the white logo change to a BLUE logo... once you see that you can let go.
Does that work and get you into Recovery? ...let me know.
One other thing to try...
Plug your USB cable into the Computer ONLY ---Not the phone.
Take out the battery, do NOT put it back in.
Now (with the battery still removed), Press and Hold [Volume Up+] and [Volume Down-] together. Do not press the Power button.
While still holding both Volume buttons together, insert the USB cable into the phone.
Now wait a second or two, does the phone Power On into a "Download mode screen"?
If not, let go of the Volume buttons and unplug the USB from the phone.
Now plug the USB back into the phone. Press and hold the [POWER] Button for several seconds (still with NO battery in, just the USB).
Does that turn the phone on?
P.S. - This might be good to have as well:
User manual (Spanish): http://www.lg.com/us/products/documents/LG-G2x-UserGuide_ES.pdf
Service Repair Manual (English): http://www.mediafire.com/view/?cscdjc6p08t2omq
Click to expand...
Click to collapse
I'm currently downloading the service manual and the user manual.
Ok, i tried the first thing. The phone gets on recovery mode. All good.
On the second thing to try:
-I followed the steps just as you said: vol+ and vol- and connect usb cable. It makes a sound of connected device, checked and windows detects a NVIDIA USB Boot-recovery driver for Mobile devices, but the phone screen never powers up or show a download mode screen. When i flash anything with NVFlash it shows the Download mode screen...
-I plugged the phone without battery, and pushed the power button. The phone does not power on. Not even the LG logo or anything.
I'm still trying to get that logcat. But everytime that i want to type "su" on the adb shell says that cannot found su...
Now i'm on recovery.
Advanced> fix permissions: Done.
Show log:
Init.svc.adbd=running
I: Checking for extendedcommand...
I: Skipping execution of extendedcommand, file not found...
W: Failed to mount /dev/block/mmcblk0p1 (invalid argument)
W: Failed to mount /dev/block/mmcblk0p7 (invalid argument)
Fixing permissions...
/sbin/fix_permissions 2.04 started at 01-01-2007 00:00:36
cat: can't open '/data/system/packages.xml' : no such file or directory
cat: can't open '/data/system/packages.xml' : no such file or directory
/sbin/fix_permissions 2.04 ended at 01-01-2007 00:00:36 (runtime: 0m0s)
Done!
Whats the status on this are you still dead? Looks like you need to do that partition formatter script now... appears your partitions are messed up. What ROM is on there now?
oOo B0XeR oOo said:
Whats the status on this are you still dead? Looks like you need to do that partition formatter script now... appears your partitions are messed up. What ROM is on there now?
Click to expand...
Click to collapse
Sorry, i didn't get the mail of new post...
Yeah, it's still dead...
Today, i put the battery on the phone and it started right away. Battery status ok, everything working fine. But i didn't put a sim card, so i turned off the phone and it's dead again.
I don't know if i'm getting a GOOD partition formatter. But i've already used one... and the result it's the same...
And even tried a crazy method of one guy that put the phone on the fridge for 10 mins and then NVFlashed-it to a stock gb...
And nothing U_U
Power up, show a bright LG logo, then a less bright one... power off...
Thanks for your help...
EDIT:
Today i opened the phone, extracted the logic board and watched everything. A VERY SMALL bga chip (i don´t know wich) had a little crack on it, i cleaned with a soft brush and a little piece came off... Now the phone doesn't boot at all, not even the LG logo... i think that's the end...
If someone can indicate me where i can buy a new mainboard it would be very appreciated. Thanks.
END
LG
eBay
Stuff wanted/selling here
Find a person selling a great phone but like the screen is broken or something. Look at the repair manual i posted previously above.
hi im pretty new here a friend of mine gave me her lg c800 mytouch to try and fix it for her.. not sure what she did she said she rooted the phone and the root was successful but i have a good idea that she doesnt know what she was doing..i will post a pic of the error screen im getting. but it says
E:Cant find misc
E:cant find misc
Finding update package...
E:unknown volume for path [sd:/download/adb_fastboot_and_other_tools.Zip]
E:Cant mount SDCARD:/download/adb_fastboot_and_other_tools.zip
Installation aborted
facory reset failed
restart factory reset..
now im far from a pro at this i know a lil more about computers and Ios devices..but ive rooted a few phones and to me it looks like she unzipped adb fastboot on her phone from her sd card??
ive tried holding F..A..vol down..and power..Nothing..
ive tried volume up .volume down and power still nothing..
BUT if i hold E..vol UP and power it brings me to a white screen that says S/W update
the big problem is the phone wont stay on long enough to do anything on the computer it stays on 3 sec. then reboots to same screen (computer says phone is unplugged) then phone just keeps restarting.
but the phone WILL stay on when i put it on the S/W update screen..but computer wont recognize the phone at all on that screen
ive tried the adb and fastboot commands but the phone wont stay recognized..it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
well thanks ahead of time if anyone has any input or solution
and hopefully all this will make sense to someone lol
i think this pic will work.. if not ill try again
any ideas please?? or am i completely out of luck?
When you say:
delilah25 said:
it will recognize the phone and say thats its in recovery mode but when phone restarts it dont see phone no more..
Click to expand...
Click to collapse
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
post-mortem said:
When you say:
...do you mean that you can successfully communicate with the phone over USB, but you only have 3 seconds? What way is the phone recognized? Is it visible to adb/fastboot?
Click to expand...
Click to collapse
Yes In Adb device list it shows the phone and then says recovery..but after that I don't have enough time to type any other commands ..the phone is also recognized in "my computer" as removable device then when the phone restarts seconds later it says device unplugged ..and just keeps restarting on its own till I remove the battery...I just read on the forum in a post that Adb will recognize the phone if it's off but I remove the battery and put it back in and plug in USB and phone turns on and keeps restarting won't even let me turn it off!! I'm losing patience with this thing lol
But I don't get why the error mentions fastboot? Not my phone so if it's not fixable I don't really care but I'm just the stuborn type when it comes to fixing electronics ..again thanks ahead of time to anyone that helps cuz I'm completely lost on this one
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
i have the same problem
post-mortem said:
Have you tried timing it to send a quick "adb reboot recovery"? If you can use fastboot, you can tell it to boot off a new, custom recovery img, without actually flashing it.
Click to expand...
Click to collapse
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
diabolus ae said:
i used an app on the market to remove bloatware. i removed slacker and the app stated that after two reboots that everything would be fine and the app would be gone. after one reboot the phone has the same screen this gentlemans lady friend has. it looks like the app its looking for is no longer zip aligned properly. someone told me to rename a recovery image the error message to trick the bootloader into thinking the missing app is there. hes an app dev so i figured he knows whats what. ive tried everything the gentleman in this post said and more. hell i have two of these phones and rooted the other and made a backup of that phone and dragged the backup to an sd card and rebooted to see if any of the backed up system apks would trigger a successful reboot but to no avail. i have all the drivers i need and adb commands but nothing works because the phone doesnt stay connected to my pc long enough for anything. please reply with some knowledge. ive been scouring the web for at least a month. i was so happy when i came across this. i actually became a member just to post about this erroer (look up diabolus ae in the forum search field. my post is about 3 days old with a better pic of the screen message. i bought a galaxy s II but i want to give the lg to my son. please help or respond:cyclops:
Click to expand...
Click to collapse
Normally, if you want to flash a custom recovery through fastboot, people will tell you to run 2 commands:
fastboot flash recovery nameofimagefile.img
fastboot reboot recovery
Since you don't have time to execute those 2 commands, you can tell it to just boot from the .img file, without flashing over your current recovery. (This is actually proper form, as you can test if the .img file works properly without damaging your existing recovery.) The way you do that is to 1st copy a recovery .img file to the root of your SD card, then execute the following 1 command:
fastboot boot nameofimagefile.img
Since you only have ~3 seconds, type the command in, and wait for the right instant to hit enter on the keyboard. If the command is successfully sent to the phone, it will reboot into that .img.
See if that works for you. Good luck.
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you try flashing factory images?
ryukiri said:
Did you try flashing factory images?
Click to expand...
Click to collapse
Yeah, that was what I flashed :/
If you can get into fastboot you "should" be able to flash stock images... Obviously this will revert any root and you will need to flash TWRP/CWM recovery after.
I assume you have a Windows PC with fastboot/adb setup and all drivers etc..
- Download latest "stock" hammerhead images (I cannot post links due to XDA rules... so: "developers.google.com/android/nexus/images#hammerhead"
- Extract the .tgz archive contents on your PC into a folder
- Boot the N5 into fastboot and plug USB cable from phone into your PC
- Go to the folder with the extracted files and run the "flash-all.bat" script on Windows
**Hopefully at this point your device will start to respond.. I.e, on fastboot screen, at the bottom you will see "writing" or something, as the script runs on the command window on your PC.**
If this works, you should be able to reboot once complete and then wait to see if you can get back into your phone.. then you can fastboot again and flash custom recovery, and then whatever rom.
If however you have a hardware issue (i.e, even after the above process it fails) then I am not sure what you could do... I guess ensure it has a complete charge. If you can get into fastboot and the buttons are responsive then it should not be a faulty power button.
Hope this helps :good:
Have you tried a simple factory reset? Reason I ask is it was working fine so sounds like something needs "flushing out" clear cache etc.
kyle313 said:
Hey folks...I'm running into a problem I was hoping someone might be able to help with.
Earlier today I pulled my phone out of my pocket at work and saw that it was off...I thought that the battery must have died sooner than I thought. I started charging it in the car on the way home and it wouldn't boot up like normal. It would get to the google or "dots" screen and then reboot. I again thought that the battery might just be really low. After getting home and charging the phone all the way I still can't get it to boot up. As of now, one of 3 things will happen...
1-The phone will turn on, get to the google screen and bootloop (usually when plugged in).
2-The phone will turn on, get to the google screen and freeze.
3-Get to the "dots" screen and either swirl forever or eventually reboot and do one of the above again.
I've read some threads where people suggest this is a faulty power button, that doesn't seem to be the case for me though because I can get into fastboot and it won't select anything or turn off without me doing it.
I've used WugFresh NRT and wiped/reflashed android. I'm running out of ideas. Do you have any others?
I was running the stock 5.0.1, unlocked, not currently rooted.
Thanks!
Click to expand...
Click to collapse
Did you choose the right model and firmware before you flash in WugFresh NRT?
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
howard bamber said:
The above could be right, however when I've used it, it's pointed out if I made that mistake. Having used his software dozens of times I've found it will bring any Nexus 5 back to life.
Click to expand...
Click to collapse
Hello! I am apologize for that I didn't read the OP carefully. This happened to me once in that particulary way, but it was immediately after flashing. OP says that it happened suddenly, without reason. So now I am the one, who doesn't read, right? Sorry for that.
Regards, Zagor
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
kyle313 said:
Thanks for the responses, but I'm still having trouble.
I have been able to successfully write the newest stock android 3 times (1 without full wipe, 2 with) and the phone still can't boot up and goes through one of the three issues above.
I've also been able to get to the system recovery from the bootloader and I've tried wiping the cache and doing a factory reset from there and the problem remains.
I'd contact google, but I bought it at launch so I don't think they'll do anything for me since it's been 1+ years.
Click to expand...
Click to collapse
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
theesotericone said:
Sounds like you have a bad nand sector. From fastboot try:
Code:
fastboot oem lock
Then reboot into fastboot and check if it's locked or not. If the device isn't locked your emmc is corrupt and there is nothing you can do. If that is the case call Google and they will most likely help you out with a RMA.
Click to expand...
Click to collapse
I was actually able to relock the phone.
Luckily I called google and they're going to send me a replacement.
If anyone else has any other ideas, I'll still take them...I'd rather not be without a phone for the next week!
You won't be without a phone - they are sending a refurbish unit to you , putting a block on your credit card and waiting for you phone to arive at them. Once that happens they will release the funds.