Related
very competitive with otterbox, but with grat designing
https://www.case-mate.com/HTC-Desire-HD/Case-Mate-HTC-Desire-HD-Pop-Case.asp
Nice I need to order
Looks very nice indeed! Might have to get one too, to interchange with my Otterbox case.
Though ive got a slight worry that glossy black will scratch like a motherducker in no time.
If anyone gets one can you post some pictures and maybe a video too? Curious to see what that plastic is like. Cheers!
I was gonna go for a casemate tough, but I think I might wait for this, looks very nice.
Just pre-ordered one from here:
http://www.htcdirect.co.uk/index.php?main_page=product_info&cPath=2_12_80&products_id=978
Sent from my Desire HD using XDA App
the back looks great, but too chunky around the screen...
panyan said:
the back looks great, but too chunky around the screen...
Click to expand...
Click to collapse
agree but there is no alternative better
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
bobbyphoenix said:
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
Click to expand...
Click to collapse
Sounds great, be sure to take lots of pictures.
Results are in!
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
bobbyphoenix said:
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
Click to expand...
Click to collapse
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
PeatCoal said:
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
Click to expand...
Click to collapse
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
bobbyphoenix said:
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
Click to expand...
Click to collapse
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
PeatCoal said:
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
Click to expand...
Click to collapse
Well as luck would have it I have one of those on the way too. I'll do the same kind of review when that one comes in. Can you tell I love cases?
bobbyphoenix said:
Can you tell I love cases?
Click to expand...
Click to collapse
..nope
I look forward to it
Nice review ordered mine too just now.
Sent from my Desire HD using XDA App
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
psych0t1c said:
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
Click to expand...
Click to collapse
The shinny black part is very hard plastic, and since the very soft gray part is fused to it, it is really really hard to get in and out. I almost feel like if I push any harder I'm going to break one or the other, but the soft part is just soft enough to get it in there. I don't see how it could get easier over time. It's one of those cases that once it's on, it's on for a long long time. Compared to the OtterBox Commuter case that one seems like it can fall off, and the Pop case seems like it was actually made into the phone, and not to come off without a struggle, but if I had to make a choice I would pick the Pop case 100% of the time. Again if you compare them side by side the OtterBox looks like it was made for a kid to play with, and the Case-Mate one that you buy tickets to see it in a museum. It is that good!
Thanks a lot for the quick reply mate. I was thinking that maybe one could cut or file down one of the plastic ridges that snap into place around the screen to hold the device.
I done that ages ago on a case for a XDA mini, and it worked quite nicely but obviously there is a thin line between making the in and out easier and making the case unusable by cutting in too far...
Again thanks for your input...
...this chunk of zeroes and ones has been generated by flashing a 400 Watt halogen bulb into the open fibres of a transcontinental communications cable...
Thank you for good products to introduce.
I stumbled on this http://cheapdroids.com/T-Mobile-G2-Monaco-Aluminum-Case-Black-Open-Screen-Design.html
and was wondering if anyone had it or had reviews about it, looking to see that it wont interfere with keyboard like some do.
Hey quick question! This case does not open the keyboard right?
Sent from my HTC Vision using XDA App
jonathann0222 said:
Hey quick question! This case does not open the keyboard right?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
From the picture it looks like a solid one-piece, but then how would you get the phone in there?
"The lock on the side holds the top and bottom of the case tightly together and prevents the case from accidentally opening"
It seems that it's some kind of lock, so that would mean it's openable, but don't hold me to that
*Edit*: http://cheapdroids.com/T-Mobile-G2-Monaco-Aluminum-Case-Silver-Open-Screen-Design.html
Thats the silver one, there you can see the long mechanism a bit better, so from the looks of it, you can still open it.
Ohh I didn't see that shot great gonna order one
Sent from my HTC Vision using XDA App
Could you let us/me know how it is? It looks rather interesting
Definitely looking forward to an XDA member's review on this with better pics!
Once I get it pics and review will be up i really just want something easier to take on an off then the ones that tmobile has cause I use a case for work which is painting, and the tmobile cases felt like i would screw the phone up taking them on and off alot.
I am very interested in this case as well and will probably order. I found a different seller on eBay selling this case, link below. It includes more pictures as well.
http://cgi.ebay.com/T-Mobile-G2-Mon...Accessories&hash=item256083857c#ht_1724wt_983
Also found this retailer that has a video of it, looks slightly bulky.
http://www.wirelessground.com/t-mobile-g2-aluminum-black-case.html
looks like oyu need to open just to use keyboard screw that
ionic7 said:
looks like oyu need to open just to use keyboard screw that
Click to expand...
Click to collapse
Well a lot of people around here are looking for that. Something to lock the keyboard in place during normal day to day use. That way it isn't opening in your pocket and stuff like that.
shadowofzeus said:
Well a lot of people around here are looking for that. Something to lock the keyboard in place during normal day to day use. That way it isn't opening in your pocket and stuff like that.
Click to expand...
Click to collapse
Yea that works out for them but it means im still on the hunt >>
I agree in theory you shouldn't have to need this case. But if you are like me, my phone hinge is loose and it feels wobbly to even text. So if this case can hold the goods together securely then it looks like its worth it.
Just ordered one. Let's see if its better then the otterbox.
[G2/HTC Vision]
http://www.youtube.com/watch?v=_Q606qauJ4A&feature=related
Looks sturdy. The added bulk keeps me away though.
I agree, I am worried about the excess bulkiness. Looks like a brick! All my friends have iPhone 4's so I dont want to pull out something looking a decade old! However pics and youtube videos can be deceiving. The G2 is a beautiful phone and doesnt seem to show scratches easy. I too have the loose hinge and like I said in a previous post, scotch tape on the sides is the best answer!
mstyle88 said:
I agree, I am worried about the excess bulkiness. Looks like a brick! All my friends have iPhone 4's so I dont want to pull out something looking a decade old! However pics and youtube videos can be deceiving. The G2 is a beautiful phone and doesnt seem to show scratches easy. I too have the loose hinge and like I said in a previous post, scotch tape on the sides is the best answer!
Click to expand...
Click to collapse
Agreed. I always find myself buying cases for all of my devices. 2 weeks later i end up ditching them going back to naked. right now i just have the stealthguards full body protector on which is excellent even for 10$. I, for one, hate the g2's keyboard, however, its one of the best ones out thus far. (if that makes any sense)
Anybody who ordered this case received it yet? Ordered mine on the 17th and still hasn't arrived....
[G2/HTC Vision]
DO NOT ORDER. Took forever to come and the case is complete crap. Finish sucks. Build sucks. Overall suck
[G2/HTC Vision]
As soon as I noticed the Thunderbolt Kickstand I was thinking polish time.. But didn't want to jump the gun.. Till I noticed the clear coat was practically falling off.. along with everyone else's. All you need is about 15 mins and the will to mess with your big dollar TB.
If your clear coat is falling off. Just take your nail or a pen cap and finish scratching the rest off. Try to avoid using metal unless you want to put some knarly scratches in it. If you do use metal. Be very light and go left to right and not up to down so your following the factory lines in it.
Once done grab the masking tape and tape under and all over to keep the pretty T bolt clean.
Get some mothers or what ever polish and go to town. Just use a little bit and you can use your finger and start buffing. By just the texture of your finger it will remove the factory lines.
Then wipe off and continue till its nice and pretty Haha..
Make sure you wipe everything off with Q Tips and all before opening your kickstand..
Once cleaned off. Pull the tap and admire your new TB mirror.. Very nice..
Hope this helps. Any questions, please ask...
Looks nice
-Monky_1
It's always nice to know what the finished product will look like before deciding whether or not to try something like this, so thanks for being the guinea pig.
Yes, thanks! I will probably be doing this once mine starts peeling.
Sent from my ADR6400L using Tapatalk
nice gunna do this today when get off work
I think I'll try this tonight. Thanks for this post.
Sent from my ThunderBolt using Tapatalk
Something so simple, and most of us never even thought of doing this. Thanks for this, mine is peeling off and I was getting upset because i'm anal about things like that lol
Only downfall I'm seeing is, fingerprints and what not on the kickstand. But not any different then the glass screen.. Haha
Sent from my Thunderstruck
I like it. I will definitely do this later.
I took some 1500gtit sandpaper to my kickstands and kept the brushed look. I like that the "with Google" is etched in there and remained.
sandpaper worked like a charm for me too. happy with the brushed look for now, may consider the polish.
It was only a matter of time.
Polished looks great, but it's sometimes a PITA to keep looking that good.
Nice work!
g00s3y said:
Something so simple, and most of us never even thought of doing this.
Click to expand...
Click to collapse
Kind of ironic, given how many people have GREAT ideas for software changes/upgrades, haha!
OP, thanks for the pics. Looks great!
Looks great! When mine peels bad enough I think I will polish and then re clear.
Toothpaste will work too
Most toothpastes will work for this sort of thing. In the Army, we used to take the lacquer layer off our various brass items this way. Great seeing a fix like this here. The new mirrored surface comes in handy.
Thanks!
looks really good, I don't get why so many people are having issues with the finish peeling off? Mine is perfect and i use the kickstand daily. But if mine does peel i might polish it.
how does it look with the finish peeled off w/o polishing it? i prefer the brushed metal look.
Mine was badly peeling off so i decided to do it also. Taking the coating took a lot longer than expecting using a plastic pen. I then found an aluminum pen to easily strip the rest off without scratching it. I sanded the scratches out, but didn't have any fine sandpaper to clean it all up. I'm kinda liking the slightly brushed/polished look though.
Without polish or coating
Polished
Will probably sand it down a bit more and polish it up more later on. More scratches are starting to appear, but im happy with how it looks.
doesn't look bad, always thought it'll look good. thanks!
Looks great! I'm going to use one of those green scrub pads tonight.
Sent from my ADR6400L using XDA Premium App
I just wanted to give a huge thanks to Android Fan Network (Nick) for sending me this case! :highfive: Thanks guys!
okay, so this is the first time I've ever seen a diztronic case.
i wasn't sure what to expect, honestly, i first heard about them a week ago when i saw AFN's review they posted on facebook. Well, I wanted to get my hands on a case ever since I saw that review. So, naturally I was really excited to get home from work tonight at 8pm to find this sitting in my mailbox! Even though the unit I received was pink I still wanted it on my phone, for a few minutes at least! Well, I just want to say that Diztronic really used high quality TPU when they designed this case. It really has a premium feel that a lot of TPU cases lack.
PRO's:
-fitment, honestly it is exactly like it should be. No excess space and nothing is cramped. (the IR blaster is slightly off center, but it still works perfectly)
-button covers. Yes, this is actually a PRO on this case. It is flimsy enough to allow for a tactile feedback of the button! It actually clicks. I don't know why all companies don't make this a priority.
-Lip, it has just the right amount of lip around the top edge to protect your device without going insaine
CON's: These are so minimal, I almost didn't even list them
-No grip on the sides
-camera cutout is not 'perfect' it is slightly raised and causes the phone to rock back and forth when placed on the back, it is also a large square instead of being cut the fit. (not a big deal just something to note)
-My review unit is pink and I cannot be seen with it on my phone in public.
Overall, I would give this TPU case a 5*/5* It is exactly what I look for in a case, and if it were not pink, I would keep it myself! So, if anyone would like a sparkly pink TPU case from Diztronic, I would like to offer the chance to win it, free shipping and all.
I want someone to answer the following question: (Yes, I am a math geek!)
Solve the system:
1) x+2y+2z=10
2) 2x+y+z=8
3) x+3y+2z=11
First person to give me all three numbers that x, y , and z represent wins the case with no shipping charges. Good luck!
Disregard my marked fingers. I work at starbucks and I happened to be on register during happy hour...:crying:
Volume rockers
power button
Let me know what you guys think, I know I love the case sans color choice!
delete
wttisme said:
x=2 , y=1 , z=3
Click to expand...
Click to collapse
He's right, damn, nice job wish I saw this earlier!
Sent from my Black Nasty S4 using Tapatalk 2
delete
wttisme said:
Lol, I knew linear algebra was good for something. I don't really think I know anyone who would want this case. I already have 9 TPU cases and pink isn't one of my favorite colors. I may pass it on to someone else.
Click to expand...
Click to collapse
He is correct, nicely done. Do you want the case or were you just solving it? Just want to be sure.
delete
wttisme said:
If Anthony04x has a genuine use for it, then I will pass it on. Thanks for doing this, it's a good aside from the oh no my phone has 9gb or it's slow threads xD.
Click to expand...
Click to collapse
I know, I personally love the phone and want to help build a better community here. I got this case for free and really only wanted to review it. I know I love getting something I want for free, especially something that is, in my opinion, good. I'm going to give away two other cases soon, so be on the lookout for those!
I agree though, there is a lot of negative threads here, we need more positive ones for such a great phone.
Pass it on like OP said, can't be seen in public with a pink s4 now, if my girlfriend had an s4 I'd gladly take it but she has a lame 4s
Sent from my Black Nasty S4 using Tapatalk 2
delete
Alright, so first come first serve. Who ever has a girlfriend with an S4, or would just like an awesome TPU case that happens to be pink, send me a PM or post here. (Be sure to quote me or PM me as well so I get an E-mail notification!)
Im sure there has to be one girl in our community.. lol
Sent from my SGH-M919 using xda premium
I wish I had one of those cases
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have many app ideas, but don't have the skill or the time to learn how to make an app. if you would like to know an idea and attempt to make one, just message me.
I figured those of you who haven't decided yet, you may want some accessory recommendations.
Here is my case. It is perfect for this phone. Ignore the 1 bad review, they didn't even have this phone.
https://www.amazon.com/gp/product/B01IUS5GS4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Here is my screen protector. It is a 2 pack of 9H tempered glass for $8. There is about 1mm of exposed glass on each edge after installation, but my case covers those edges perfectly. The cutouts line up perfectly and has a Hydrophobic and Oleophobic screen coating. The screen is super smooth to the touch and installs easily without a single bubble.
https://www.amazon.com/gp/product/B01H3SI1TS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Those are the only accessories I've bought so far, maybe period as I can't think of anything else I could need. I have the 256GB so I won't need a MicroSD. Let me know if you have anything that may be better. I hope you are enjoying your ZenFone 3 Deluxe as much as I am.
Ordered the same case yesterday. Should get it next week... I'm glad you like it!
finale477 said:
Ordered the same case yesterday. Should get it next week... I'm glad you like it!
Click to expand...
Click to collapse
Let me know how u like it. I love mine
I ordered the silver variant of that case last week. Suprised at how well the back stays on there with as little room it has to snap on there. Got a second one coming in for my Special Edition (own the 820 and 821 model).
Anyways, it's a great case. Just wish Spigen will come out with a slimline model of their cases for the phones. Had theirs with the kickstand for my note 4 and it was about as slim as this one and worked well for the 2 years I had the phone lol
firepong said:
I ordered the silver variant of that case last week. Suprised at how well the back stays on there with as little room it has to snap on there. Got a second one coming in for my Special Edition (own the 820 and 821 model).
Anyways, it's a great case. Just wish Spigen will come out with a slimline model of their cases for the phones. Had theirs with the kickstand for my note 4 and it was about as slim as this one and worked well for the 2 years I had the phone lol
Click to expand...
Click to collapse
That backplate impressed me as well. It was a very nice implementation
https://www.amazon.com/HOMOSA-ZenFo...08250&sr=8-2&keywords=homosa+zenfone+3+deluxe
This view cover is +1
Built in stand. When they get the always on display back running it will be even better.
Blues-n-Blazin said:
Let me know how u like it. I love mine
Click to expand...
Click to collapse
So far it's pretty nice. However, I will say the back is slightly slippery. It has better grip than the phone itself, but not much better.
Other than that, a pretty decent slim case
+1
I actually bought both of them.
Blues-n-Blazin said:
Let me know how u like it. I love mine
Click to expand...
Click to collapse
Got the "all black one". And i'm quite satisfied with it pretty good looking but i have a remark to make the side buttons are a little bit too hard for my taste. Besides that great cover. Still waiting for the temperate glass.
Sent from my ASUS_Z016D using XDA-Developers mobile app
Paytocum said:
Got the "all black one". And i'm quite satisfied with it pretty good looking but i have a remark to make the side buttons are a little bit too hard for my taste. Besides that great cover. Still waiting for the temperate glass.
Click to expand...
Click to collapse
I suppose the buttons are open to subjective opinion. I think they are perfect as they stick out so they are easy to find. They take a little force which I like so they don't accidentally press but still easy enough to press without adjusting your grip on the phone. It only adds a tiny bit of stiffness to the buttons, but I could see how some would press effortless button presses. I am on the opposite side of that spectrum though
Perhaps its just a matter of me geting used to it. One thing is certain it made me easier to get finger print read correctly.. With out the cover i used to get loads of misreads and with it its all fine... Quite happy with the purchase.
Sent from my ASUS_Z016D using XDA-Developers mobile app
Yeah it forces you to hold your finger vertically. That is the one thing I don't like as I wish they would've made the sides of the fingerprint edging just as slanted as the bottom.
If you are having issues with the fingerprint sensor, when you train your finger, be sure to train it a bunch of different ways. Change up the position with each press. Heck, I presume you could even train your main finger twice as two different fingers. We only get to train 5 fingers though.