Here it is, finally overclocked:
ok it wont let me post links, im too new...
so here it is: (im just reposting this dont ask me about it, just the message boy)
YOU NEED TO DOWNLOAD THE .ZIP FILE, AGAIN I CANT POST LINKS, SO GO TO DROIDFORUMS,NET OR ANDROIDFORUMS,COM TO GET IT!!!!
Notes:
I'm trying to keep this as close as possible to the way it was done on 2.1 for the Droid X. For me, 2.2 seems to need a little more voltage to be stable than it was under 2.1. I've included two versions of setscaling.sh to start from.
setscaling.sh is set to stock voltages/clock speed
setscaling100.sh is set to stock voltages w/100mhz bump accross the board to 400/700/900/1100 (This appears to be stable for me, and is the baseline for my testing/tuning)
Install Instructions
adb/terminal:
$ su
# cd /sdcard/extracted/droid2_22_oc (or wherever you extracted the files to)
# mount -o rw,remount -t ext3 /dev/block/mcblk1p21 /system
# cp overclock.ko /system/lib/modules/overclock.ko
# cp setscaling.sh /system/xbin/setscaling.sh
# chmod 644 /system/lib/modules/overclock.ko
# chmod 755 /system/xbin/setscaling.sh
<optional(only do after thoroughly testing what works for your DroidX in setscaling.sh)>
# cp install-recovery.sh /system/etc/install-recovery.sh
# chmod 755 /system/etc/install-recovery.sh
</optional>
# mount -o ro,remount -t ext3 /dev/block/mcblk1p21 /system
Run Instructions
adb/terminal:
$ su
# insmod /system/lib/modules/overclock.ko
# setscaling.sh
Your a little late but thanks
Everyone, I wrote a small script file for y'all to oc your phone with as little work as possible. Check out my thread "DOOverclock."
-Kevin
Hey guys, just got my hands on one of these suckers, it runs 2.1
Can anyone point me in the right direction to get root?
Im also looking for froyo, however dont expect it soon, manufacturer is working on it.
Sent from my S7 using XDA App
I second davidcampbell! We need froyo here
The root method is the same as the s7.
download z4root from market and root, after wards install busybox by titanium backup and you are set.
The app2sd mod works for this device since it is similar to the sony x10 on 2.1 but is risky because i lost wifi aftewards. So just explore until we get some real developers working on it hopefully cm6.1 port but after huawei realeases the recovery.img and source to mess around with though.
being able to overclock to 1ghz wouldnt hurt either.
S7 Bootloader?
Has anyone figured out how to get into the bootloader for this device?
Havent been able to through any apps \ commands. Just go to a black screen and thats it, and recovery sends you into factory settings for your device
I only know that pressing back key and call\send key when when powering on the device puts it into update mode.
alexisprz said:
The root method is the same as the s7.
download z4root from market and root, after wards install busybox by titanium backup and you are set.
The app2sd mod works for this device since it is similar to the sony x10 on 2.1 but is risky because i lost wifi aftewards. So just explore until we get some real developers working on it hopefully cm6.1 port but after huawei realeases the recovery.img and source to mess around with though.
being able to overclock to 1ghz wouldnt hurt either.
Click to expand...
Click to collapse
Zomg, nice, thank you alexisprz, it's rooting time
I really wish Android had a better term for rooting, it sounds like I'm either breaking it, or trying to cram my man bits into it some how.
Will this affect my ability to use the manufacturers update to froyo in the future?
UPDATE: z4root worked great, I installed busybox no problemo, very happy forum member here
sir i just bought one telstra touch tab can you plz help me to debrand it and unlock it i also have jtag too
pre needs, new rom and rooted with busybox on SD with linux ext2/3 Partition.
download z4root from market and root
copy 3 files to sd
run App-2-sd.sh
File 1 "App-2-sd.sh"
#!/bin/sh
# untitled.sh
#
#
# Created by Andew Blazely on 5/02/11.
# Copyright 2011 SOFTHOUSE. All rights reserved.
#
# un Hash data if you wish but it will slow the S7 down and cause lots of waiting problems
# pre needs, new rom and rooted with busybox on SD with linux ext2/3 Partition.
# mount the file systems
mount -o rw,remount -t yaffs2 /dev/block/mtdblock1 /system
busybox mkdir /system/sd
mount -t ext2 /dev/block/vold/179:2 /system/sd
# archive dirs (easier than copying)
cd /data/
busybox tar -cvf /system/sd/app.tar app
busybox tar -cvf /system/sd/app-private.tar app-private
# busybox tar -cvf /system/sd/data.tar data
busybox tar -cvf /system/sd/dalvik-cache.tar dalvik-cache
# unpack arcives in correct place
cd /system/sd
busybox tar -xvf app.tar
busybox tar -xvf app-private.tar
# busybox tar -xvf data.tar
busybox tar -xvf dalvik-cache.tar
# cleanup
busybox rm *.tar
# copy and set system files
busybox cp /sdcard/install-recovery.sh /system/etc
busybox cp /sdcard/init-sd.sh /system/etc
busybox chmod 755 /system/etc/install-recovery.sh
busybox chmod 755 /system/etc/init-sd.sh
# un Hash whatis needed if you intend NOT to remove SD
#cd /data/app
#busybox rm -rf *
#cd /data/app-private
#busybox rm -rf *
#cd /data/data/
#busybox rm -rf *
#cd /data/dalvik-cache
#busybox rm -rf *
# binding mount of new file structure
mount -o bind /system/sd/app /data/app
mount -o bind /system/sd/app-private /data/app-private
# mount -o bind /system/sd/data /data/data
mount -o bind /system/sd/dalvik-cache /data/dalvik-cache
reboot
File 2 "init-sd.sh"
#!/system/bin/sh
#
MYLOG=/sdcard/install-recovery.log
echo "$(date) Starting install-recovery.sh" > $MYLOG
echo "$(date) Waiting SD to become ready..." >> $MYLOG
sleep 10
# un Hash whatis needed if you intend NOT to remove SD
#echo "$(date) Erasing system files..." >> $MYLOG
#cd /data/app
#busybox rm -rf *
#cd /data/app-private
#busybox rm -rf *
#cd /data/data/
#busybox rm -rf *
#cd /data/dalvik-cache
#busybox rm -rf *
#echo "$(date) Erased system files..." >> $MYLOG
mount -t ext2 /dev/block/vold/179:2 /system/sd 1>>$MYLOG 2>>$MYLOG
mount -o bind /system/sd/app /data/app 1>>$MYLOG 2>>$MYLOG
mount -o bind /system/sd/app-private /data/app-private 1>>$MYLOG 2>>$MYLOG
# Hash this out if you haven't moved /data/data
#mount -o bind /system/sd/data /data/data 1>>$MYLOG 2>>$MYLOG
# Hash this out if you haven't move /data/dalvik-cache
mount -o bind /system/sd/dalvik-cache /data/dalvik-cache 1>>$MYLOG 2>>$MYLOG
mount >> $MYLOG
echo "$(date) Finishing install-recovery.sh" >> $MYLOG
File 3 "install-recovery.sh"
#!/system/bin/sh
#
/system/etc/init-sd.sh&
And BOB's your uncle.. this has worked many times for me give it a try
This might work on other devices.
WARNING: this might brick your phone use it at your own risk.
Warning you have to have some knowlage of linux to do this kind of stuff.
WARNING: actually you have to have _good_ knowlage of linux/gnu stuff to do it.
The idea is this is to make the /system/bin/toolbox from the stock rom suid (permision 6755, it originaly has 0755)
This is how I did it. It might be simpler.
get a stock rom that you want. for me it was B5330XWALH3
it is now available at samsung-updates.
You need odin (heimdal will not work with my phone) (my was 3.07)
unpack the zip.
you get a .tar.md5 file (the tar file has broken headers so tar from ubuntu 12.04 will not unpackit).
the tar file works in sectors of 512 bytes.
take out the md5sum at the end of file. (some thing like: head -c (the size up to the last md5sum) original.tar.md5 > file1)
split the file so you will have the system.img.md5 separated (some thing like: head -c (the size upto "system.img.md5") file1 > file2;
head -c (the size upto "dt-blob.md5") file1 | tail -c +(the size upto "system.img.md5" + 1) > file3;
tail -c +(the size upto "dt-blob.md5" + 1) file1 > file4
file3 now has the system.img.md5, trim the md5sum from the tail and the tar headr from head (ex.:
head -c (upto the md5sum output from the rear of the file) file3 | tail -c +513 > file5)
file5 is a sparce image file of an ext4 filesystem. run simg2img (from ext4fs_utils (search on xda)) (ex.:
simg2img file5 file6)
sudo mount -o loop,ro file6 /mnt
look for the file /mnt/bin/toolbox (ex.: ls -l /mnt/bin/toolbox) it will give you an output like this:
-rwxr-xr-x 1 root 2000 99068 Aug 9 07:59 /mnt/bin/toolbox
sudo umount /mnt
the permisions and the size of the file yield the following hex sequence that you get in the file (we will hexedit the ext4 fs): ED 81 00 00 FC 82 01 00
in file3 edit the sequence (it should be only one in the file) from ED 81 00 00 FC 82 01 00 to ED 8D 00 00 FC 82 01 00 (practically adding the suid guid bits to the inode of the toolbox)
we are almost done, now to pack our bags and go.
verify that you have indeed put suid guid to toolbox:
head -c (upto the md5sum output from the rear of the file) file3 | tail -c +513 > file5;
simg2img file5 file6;
sudo mount -o loop,ro file6 /mnt;
ls -l /mnt/bin/toolbox
It should give an output:
-rwsr-sr-x 1 root 2000 99068 Aug 9 07:59 /mnt/bin/toolbox
sudo umount /mnt
recalculate the md5sum to the _expanded_ image: md5sum file6 > file7
overide the md5sum at the end of file3 with the one from file7
now pack the pieces in one tar: cat file2 file3 file4 > myfirmware.tar
add the md5sum to it: md5sum myfirmware.tar >> myfirmware.tar
change the name to .tar.md5: mv myfirmware.tar myfirmware.tar.md5
copy the file on a windowze machine (that has odin and the samsung drivers intalled).
update with odin the new firmware (which you should put in the PDA section) (don't forget to un check the repartitioning).
you should have now a practivally rooted device.
in order to have su and Superuser.apk on it you have to do the following steps:
push with adb su, busybox and Superuser.apk into /data/local/tmp on device (you get the files from other forums here at xda)
the next steps are on device (use adb shell)
verify that indeed we have a suid toolbox: ls -l /system/bin/toolbox should give that wanderfull -rwsr-sr-x permission.
find a rw mount that has suid (in my case a tmpfs is mounted /mnt/obb)
copy su to /mnt/obb (remember that we have suid toolbox this means that toolbox now gives you root on any command):
dd if=/data/local/tmp/su of=/mnt/obb/su
give su suid and make it owned by root: chmod 6755 /mnt/obb/su; chown 0.0 /mnt/obb/su
run su now and enjoy the #: /mnt/obb/su -
Click to expand...
Click to collapse
Ofcorse after you get # you should remount /system as rw, copy su in /system/xbin, copy Superuser.apk in /system/app, copy busybox in /system/xbin, make symlinks to busybox for all the comands in /system/xbin.
You should also upon success remove suid from toolbox so as to not mistakely do damage to the system (for instance "rm /")
And here you have it.
If you do not understand what I have done, you should read more linux / tar / ext4 / md5sum.
This method should work for any phone provided that it has odin as bootloader and there is the stock rom available.
hello
I don't have knowledge about how you have rooted the firmware for b5330, the steps you made are waaaay to dificult for me . Could you provide here an already rooted firmware, to download and install. thanks in advance
ETTT said:
This might work on other devices.
WARNING: this might brick your phone use it at your own risk.
Warning you have to have some knowlage of linux to do this kind of stuff.
WARNING: actually you have to have _good_ knowlage of linux/gnu stuff to do it.
The idea is this is to make the /system/bin/toolbox from the stock rom suid (permision 6755, it originaly has 0755)
This is how I did it. It might be simpler.
Ofcorse after you get # you should remount /system as rw, copy su in /system/xbin, copy Superuser.apk in /system/app, copy busybox in /system/xbin, make symlinks to busybox for all the comands in /system/xbin.
You should also upon success remove suid from toolbox so as to not mistakely do damage to the system (for instance "rm /")
And here you have it.
If you do not understand what I have done, you should read more linux / tar / ext4 / md5sum.
This method should work for any phone provided that it has odin as bootloader and there is the stock rom available.
Click to expand...
Click to collapse
bogdan_rize said:
I don't have knowledge about how you have rooted the firmware for b5330, the steps you made are waaaay to dificult for me . Could you provide here an already rooted firmware, to download and install. thanks in advance
Click to expand...
Click to collapse
no need to upload 400M for this little modification.
I'm unable to post links, goto samsung-updates
go and download B5330XWALI2_B5330OXXALI2_B5330XWLH1_HOME stock firmware.
and apply this xdelta patch over it.
xdelta patch sGTB5330.patch B5330XWALI2_B5330OXXALI2_B5330XWLH1_HOME.tar.md5 myfrm.tar.md5
Click to expand...
Click to collapse
after that you have the firmware that I use to root my phone.
Still... this firmware will not have "su" install, it will just be a rootable firware because it has a suid'ed toolbox.
a suid'ed toolbox in android means that you can exec chown and chmod as a root.
So. After the patching of the stock rom and flashing it. you have to have this md5sum output:
032b4344ab503c8413db9127efaa3d83 myfrm.tar.md5
Click to expand...
Click to collapse
odin will accept it (I've used Oding 3.07).
after that you push the files from the attached tar.gz to /data/local/tmp
tar -xzf superuser_stuff.tar.gz
adb push su /data/local/tmp
adb push Superuser.apk /data/local/tmp
adb push busybox /data/local/tmp
Click to expand...
Click to collapse
after that you bassically have to run this commands in an android shell in order to get to a stardard rooted android:
adb shell # enter the in the phone
dd if=/data/local/tmp/su of=/mnt/obb/su # copy the su binary to a place that can be sudoed
chown 0.0 /mnt/obb/su # modify the owner
chmod 6755 /mnt/obb/su # set SUID flag.
/mnt/obb/su # becomes root !!
mount -o remount,rw /system # remount the system partition as readwrite.
dd if=/data/local/tmp/su of=/system/xbin/su #copy su in path
chown 0.0 /system/xbin/su
chmod 6755 /system/xbin/su
chmod 755 /system/bin/toolbox # close the security hole (toolbox is nologer with SUID)
dd if=/data/local/tmp/Superuser.apk of=/system/app/Superuser.apk # copy the superuser application
chown 0.0 /system/app/Superuser.apk
chmod 666 /system/app/Superuser.apk
#now this is done for busybox
dd if=/data/local/tmp/busybox of=/system/xbin/busybox
chown 0.0 /system/xbin/busybox
chmod 755 /system/xbin/busybox
Click to expand...
Click to collapse
have fun.
I downloaded this firmware: Samsung-Updates.com-GT-B5330_COA_1_20120913171601_pducfx5hbw.zip. Where, how, what???...i unzipped it and now how to apply the patch? The rest of the stept i think i get it....i think For you it's easy to say, for me it's hard to do. I've had sgs1, sgs2 and sgs3, and the root of those was sooooooo easy... but this piece of crap b5330 drives me crazy )
ETTT said:
no need to upload 400M for this little modification.
I'm unable to post links, goto samsung-updates
go and download B5330XWALI2_B5330OXXALI2_B5330XWLH1_HOME stock firmware.
and apply this xdelta patch over it.
after that you have the firmware that I use to root my phone.
Still... this firmware will not have "su" install, it will just be a rootable firware because it has a suid'ed toolbox.
a suid'ed toolbox in android means that you can exec chown and chmod as a root.
So. After the patching of the stock rom and flashing it. you have to have this md5sum output:
odin will accept it (I've used Oding 3.07).
after that you push the files from the attached tar.gz to /data/local/tmp
after that you bassically have to run this commands in an android shell in order to get to a stardard rooted android:
have fun.
Click to expand...
Click to collapse
bogdan_rize said:
I downloaded this firmware: Samsung-Updates.com-GT-B5330_COA_1_20120913171601_pducfx5hbw.zip. Where, how, what???...i unzipped it and now how to apply the patch? The rest of the stept i think i get it....i think For you it's easy to say, for me it's hard to do. I've had sgs1, sgs2 and sgs3, and the root of those was sooooooo easy... but this piece of crap b5330 drives me crazy )
Click to expand...
Click to collapse
I've used xdelta package.
if you are on win then you're on your own.
there is xdelta.org and it seems to have pachage for windows.
for sgs[123] was easy because are main streams. may hackers were working on it.
this device is very new/obscure.
I whould have made a script, but alas, "heimdal" firmware loader whould not work with this device.
I've used linux to patch the firmware and windowze to upload it.
So a script whould be imposible, but after you pach .tar.md5 file and load it on your phone is just about cut and paste form my previous post.
My hope is that a more android savy guy will take this concept and make it a script.
I am just happy that I can now have debian on my phone.
yes, i am on win....there is no way to patch that COA firmware (i am from romania) and upload somewhere to download???i know i am probably asking to much from you, but i dont't think i will manage by my own...this rooting busines is driving me crazyyyyy :crying::crying::crying: thank you so much for your answer!!!
ETTT said:
I've used xdelta package.
if you are on win then you're on your own.
there is xdelta.org and it seems to have pachage for windows.
for sgs[123] was easy because are main streams. may hackers were working on it.
this device is very new/obscure.
I whould have made a script, but alas, "heimdal" firmware loader whould not work with this device.
I've used linux to patch the firmware and windowze to upload it.
So a script whould be imposible, but after you pach .tar.md5 file and load it on your phone is just about cut and paste form my previous post.
My hope is that a more android savy guy will take this concept and make it a script.
I am just happy that I can now have debian on my phone.
Click to expand...
Click to collapse
bogdan_rize said:
yes, i am on win....there is no way to patch that COA firmware (i am from romania) and upload somewhere to download???i know i am probably asking to much from you, but i dont't think i will manage by my own...this rooting busines is driving me crazyyyyy :crying::crying::crying: thank you so much for your answer!!!
Click to expand...
Click to collapse
ok here it is the modified firmware.
http://dl.transfer.ro/myfrm-transfer_ro-29oct-8a4089.zip
Interesting, reading carefully
Sent from my GT-B5330 using xda app-developers app
Thank you so much, tomorow morning i know how i'll spend my time...installing and rooting my b5330, unfortunately this evening i don't have my laptop on me forgoted at work ), but i've downloaded the firmware from phone and now waiting to have it done...finally!!! I'll let you know what have i done. Have a nice day and once again thanks!!!
ETTT said:
ok here it is the modified firmware.
http://dl.transfer.ro/myfrm-transfer_ro-29oct-8a4089.zip
Click to expand...
Click to collapse
it's not working, when i'm trying to adb remont it says: remount failed: Opertaion not permited. After i flashed with odin the firmware you gave to me, i think i do not have permission to make any changes, and i don't know why
ETTT said:
ok here it is the modified firmware.
http://dl.transfer.ro/myfrm-transfer_ro-29oct-8a4089.zip
Click to expand...
Click to collapse
Can you make patch for dxlh3..? Thanks
Sent from my GT-B5330 using xda app-developers app
bogdan_rize said:
it's not working, when i'm trying to adb remont it says: remount failed: Opertaion not permited. After i flashed with odin the firmware you gave to me, i think i do not have permission to make any changes, and i don't know why
Click to expand...
Click to collapse
There commands are supposed to be given in a command line box (cmd on win).
where does it gives you error?
adb shell # enter the in the phone
dd if=/data/local/tmp/su of=/mnt/obb/su # copy the su binary to a place that can be sudoed
chown 0.0 /mnt/obb/su # modify the owner
chmod 6755 /mnt/obb/su # set SUID flag.
/mnt/obb/su # becomes root !!
mount -o remount,rw /system # remount the system partition as readwrite.
dd if=/data/local/tmp/su of=/system/xbin/su #copy su in path
chown 0.0 /system/xbin/su
chmod 6755 /system/xbin/su
chmod 755 /system/bin/toolbox # close the security hole (toolbox is nologer with SUID)
dd if=/data/local/tmp/Superuser.apk of=/system/app/Superuser.apk # copy the superuser application
chown 0.0 /system/app/Superuser.apk
chmod 666 /system/app/Superuser.apk
#now this is done for busybox
dd if=/data/local/tmp/busybox of=/system/xbin/busybox
chown 0.0 /system/xbin/busybox
chmod 755 /system/xbin/busybox
finally it worked
yeeeees, damn you're good!!!! i have managed to root my b5330, root checher tell me that i am rooted and busybox is instaled...the only problem is that it shows me that i do not have installed superuser and supersu. Is there a problem if i just copy paste the apk file (supersu.apk and superuser.apk -> i've downloaded the pro version of bouth of them ) straight into the directory /data/local/tmp where it should be? or to copy-paste in another directory. Thanks in advance, CMD(and adb shell) gave me headache, but i finally got it an succedeed )) :victory::good:
ETTT said:
There commands are supposed to be given in a command line box (cmd on win).
where does it gives you error?
adb shell # enter the in the phone
dd if=/data/local/tmp/su of=/mnt/obb/su # copy the su binary to a place that can be sudoed
chown 0.0 /mnt/obb/su # modify the owner
chmod 6755 /mnt/obb/su # set SUID flag.
/mnt/obb/su # becomes root !!
mount -o remount,rw /system # remount the system partition as readwrite.
dd if=/data/local/tmp/su of=/system/xbin/su #copy su in path
chown 0.0 /system/xbin/su
chmod 6755 /system/xbin/su
chmod 755 /system/bin/toolbox # close the security hole (toolbox is nologer with SUID)
dd if=/data/local/tmp/Superuser.apk of=/system/app/Superuser.apk # copy the superuser application
chown 0.0 /system/app/Superuser.apk
chmod 666 /system/app/Superuser.apk
#now this is done for busybox
dd if=/data/local/tmp/busybox of=/system/xbin/busybox
chown 0.0 /system/xbin/busybox
chmod 755 /system/xbin/busybox
Click to expand...
Click to collapse
bogdan_rize said:
yeeeees, damn you're good!!!! i have managed to root my b5330, root checher tell me that i am rooted and busybox is instaled...the only problem is that it shows me that i do not have installed superuser and supersu. Is there a problem if i just copy paste the apk file (supersu.apk and superuser.apk -> i've downloaded the pro version of bouth of them ) straight into the directory /data/local/tmp where it should be? or to copy-paste in another directory. Thanks in advance, CMD(and adb shell) gave me headache, but i finally got it an succedeed )) :victory::good:
Click to expand...
Click to collapse
1. I'm glad you got it.
2. You should give thanks (that button) if I helped you.
3. I'm you dont read instructions. Maybe it's a problem with us romanian engineers, or maybe engineers in general
look at item 11. from my previous post. maybe I just c&p here.
dd if=/data/local/tmp/Superuser.apk of=/system/app/Superuser.apk
So, when you are in adb shell and you go root (su command, you get the promt with #) and you have the /system mounted rw.
Then any apk that you copy to /system/app folder will get intalled and when you list your application (the button with 16 squares) you should see it.
Have fun.
i was having trouble understanding adb shell and cmd from the begining. I never used this command tool...ever ) and i think from yesterday to this day i managed really ok . Anyway i think i will just copy-paste the superuser.apk in "app" folder directly in the system (it's the same thing, isn't it??). I have done that in item 11., and after a restart supersu was instaled, only superuser.apk didn't, i think i wrote something wrong in adb shell
ETTT said:
1. I'm glad you got it.
2. You should give thanks (that button) if I helped you.
3. I'm you dont read instructions. Maybe it's a problem with us romanian engineers, or maybe engineers in general
look at item 11. from my previous post. maybe I just c&p here.
dd if=/data/local/tmp/Superuser.apk of=/system/app/Superuser.apk
So, when you are in adb shell and you go root (su command, you get the promt with #) and you have the /system mounted rw.
Then any apk that you copy to /system/app folder will get intalled and when you list your application (the button with 16 squares) you should see it.
Have fun.
Click to expand...
Click to collapse
hihihi
neeeah, my bad, i thought that in "superuser_stuff" is superuser and supersu files, it was just su->for superuser.apk, easy peasy, it worked and installed from the first time...it was just me verry verry dizzy and confused. Your guide is 100% OK, my phone is rooted and now i can enjoy !!!
ETTT said:
1. I'm glad you got it.
2. You should give thanks (that button) if I helped you.
3. I'm you dont read instructions. Maybe it's a problem with us romanian engineers, or maybe engineers in general
look at item 11. from my previous post. maybe I just c&p here.
dd if=/data/local/tmp/Superuser.apk of=/system/app/Superuser.apk
So, when you are in adb shell and you go root (su command, you get the promt with #) and you have the /system mounted rw.
Then any apk that you copy to /system/app folder will get intalled and when you list your application (the button with 16 squares) you should see it.
Have fun.
Click to expand...
Click to collapse
can you release xdelta patch for your XWALH3 because we have the same device..
phyxar said:
can you release xdelta patch for your XWALH3 because we have the same device..
Click to expand...
Click to collapse
I've started a new more universal thread:
http://forum.xda-developers.com/showthread.php?t=1965600
There you have the shell-script that will patch the firmware for you.
If you still want an xdelta patch I'll make one for you but:
Give a man a fish and it will be full for the day, teach him how to fish and it will never go hungry again.
Have fun.
ETTT said:
ok here it is the modified firmware.
dl.transfer.ro/myfrm-transfer_ro-29oct-8a4089.zip
Click to expand...
Click to collapse
Hello, i'm new here and i don't know about scripting, so need your help..
i downloaded your firmware and install it to my b5330 and did the cmd command, and it worked, thanks..:good:
but now i've a new problem that my b5330 can't type a question mark ('?').. can you help me please..
whenever i want to type a question mark it always typed a comma (',') in the screen..:crying:
it also it change the symbol and language key to emoticon and symbol, but that's not a problem for me..
andhikarogue said:
Hello, i'm new here and i don't know about scripting, so need your help..
i downloaded your firmware and install it to my b5330 and did the cmd command, and it worked, thanks..:good:
but now i've a new problem that my b5330 can't type a question mark ('?').. can you help me please..
whenever i want to type a question mark it always typed a comma (',') in the screen..:crying:
it also it change the symbol and language key to emoticon and symbol, but that's not a problem for me..
Click to expand...
Click to collapse
That's because you have use the romanian firmware. whitch has a qwerty layout keyboard.
you have to do it the right way:
first. find the firmaware for your region:
http://samsung-updates.com/device/?id=GT-B5330
second. find a linux machine and run the script from the thread.
It is unrealistic for me to just upload all the 40 version of the firmware patched.
That is why I've made the script.
If you don't have a linux machine then look for a virtual box ubuntu and run on it.
Cheers.
Hey, I installed BT5 arm on the Motorola Xoom wifi and i would like to know how to completely remove it from my device. My device is rooted and i have tried to delete the whole BT5 file with astro file manager and absolute file manager but neither of them worked. I was wondering if anyone knows another way of doing it.
I tried deleting it with commands in terminal emulator but its a read only file. Wouldn't chmod help with that? If so how would i use it?
jimmothycharles said:
I tried deleting it with commands in terminal emulator but its a read only file. Wouldn't chmod help with that? If so how would i use it?
Click to expand...
Click to collapse
Go read the backtrack 5 thread. There is a link on how to remove it. That really should be the first thing you check before asking
ok thanks, ill do that the next time i have a problem
I couldn't find it. I think it might be a tiamat BT5 img and i have the remover tool but im not quite sure how to use it. I just flashed it like i would do with a rom but it says installation failed. what would i do to fix that?
jimmothycharles said:
I couldn't find it. I think it might be a tiamat BT5 img and i have the remover tool but im not quite sure how to use it. I just flashed it like i would do with a rom but it says installation failed. what would i do to fix that?
Click to expand...
Click to collapse
Common knowledge - system must be set to RW
Here is an alternate route- manually
How To:
ADB Shell Folder Removal - (we will use BT5 as an example)
++++++++++++++++++++++++++++
1. Connect Xoom to pc
2. Boot into recovery
3. Toggle to internal storage as /sdcard
4. mount /data
Enter adb shell via pc
(cd to file location) in this case BT5, is in the sdcard directory
Code:
Code:
cd /sdcard #
(once typed, you will be at.... /data/media prompt)
if after the above command and you are not at the /data/media prompt start over)
Code:
Code:
rm -r BT5
(BT5 is the stubborn Folder)
*Side note ... This works for any other stubborn folder that you want to delete as well...
USE AT YOU OWN RISK - MAKE SURE YOU DO A BACKUP FIRST
If this was helpful Hit The Thanks!
it didnt work it said that rm failed for BT5, permission denied
jimmothycharles said:
it didnt work it said that rm failed for BT5, permission denied
Click to expand...
Click to collapse
Come on now, lol Your device must be set to rw. Google can guide you.
Mjamocha said:
Come on now, lol Your device must be set to rw. Google can guide you.
Click to expand...
Click to collapse
ok well this is what i got when i tried to do that.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\System32>cd C:\Users\josh\Desktop\xoom files\BT5
C:\Users\josh\Desktop\xoom files\BT5>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[email protected]:/ # cd storage/sdcard0/0/0/0
cd storage/sdcard0/0/0/0
[email protected]:/storage/sdcard0/0/0/0 # ls
ls
Android
BT5
Box
DCIM
Download
Evernote
Pictures
SELog.txt
Video
airdroid
goodies
goomanager
tmp
[email protected]:/storage/sdcard0/0/0/0 # rm -r BT5
rm -r BT5
rm failed for BT5, Permission denied
255|[email protected]:/storage/sdcard0/0/0/0 # rm BT5
rm BT5
rm failed for BT5, Is a directory
255|[email protected]:/storage/sdcard0/0/0/0 # cd
cd
[email protected]:/data # exit
exit
C:\Users\josh\Desktop\xoom files\BT5>adb shell
[email protected]:/ # mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
[email protected]:/ # cd storage/sdcard0/0/0/0
cd storage/sdcard0/0/0/0
[email protected]:/storage/sdcard0/0/0/0 # ls
ls
Android
BT5
Box
DCIM
Download
Evernote
Pictures
SELog.txt
Video
airdroid
goodies
goomanager
tmp
[email protected]:/storage/sdcard0/0/0/0 # rm -r BT5
rm -r BT5
rm failed for BT5, Permission denied
255|[email protected]:/storage/sdcard0/0/0/0 # rm -rBT5
rm -rBT5
rm failed for -rBT5, No such file or directory
255|[email protected]:/storage/sdcard0/0/0/0 # chmod 777 BT5
chmod 777 BT5
[email protected]:/storage/sdcard0/0/0/0 # rm -r BT5
rm -r BT5
rm failed for BT5, Permission denied
255|[email protected]:/storage/sdcard0/0/0/0 #
I looked up on google how to mount system rw and thats where [email protected]:/ # mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system came from. then i tried rm -r BT5 after that and it was still denied. so i tried to
do chmod 777 BT5 to give all permissions and then when i tried to remove it again it was still denied.
I looked up the permissions of the file and its set to rwxrwxr-x. so chmod apparently didn't work