Related
is it possible to change the default dialped to the one that i show in the attachment ?
thanks
ori
ori_lavee said:
is it possible to change the default dialped to the one that i show in the attachment ?
thanks
ori
Click to expand...
Click to collapse
Hi Ori,
I dont have the kaiser yet to tell you for sure, but I think this will work for you http://forum.xda-developers.com/showthread.php?t=321605
as long as you install the SDKCERTS.cab should be fine but why would you want to take a step back the dail pad is amazing that comes with the Kaiser
austinsnyc said:
as long as you install the SDKCERTS.cab should be fine but why would you want to take a step back the dail pad is amazing that comes with the Kaiser
Click to expand...
Click to collapse
He is using EZdial on his diaer, and it dosent fit on the Kaiser dialer.
hi shay and austinsnyc
thanks for trying to help
shay is right it is not possible to use EZDail on the default dialped.
since the default dialped that comes with the original ROM on the Kaiser is also a SKIN
it is not possible to disable it by editing the registry and install a different skin because the original skin always have preference
i need to find a way to disable the default dialped deeper than only editing the following registry velue :
HLM > Security > Phone > Skin > Enabled to 0 from 1
Ori
someone ?
ideas ?
nobody have a clue for me how can i do it
I'll post here instead of making new thread.
I also want to change my current dial pad on vario III. I already have whats presented in first post and want to have something I had on my wizard with WM6 which looked like this. Any ideas how to change to that dialpad?
very god!!!
Predo
I managed to get this dialpad by mistake !
I tried to use the program "Realvga". It has an option to remove dialpad which I selected, It then gave me this dialpad that you are talking about. Obviously the rest of the programs fatures didnt work. But i find this defualt dialpad to be faster then the default Kaisers pad.
Lemme know if this is what you are after.
dalewinterstein said:
Predo
I managed to get this dialpad by mistake !
I tried to use the program "Realvga". It has an option to remove dialpad which I selected, It then gave me this dialpad that you are talking about. Obviously the rest of the programs fatures didnt work. But i find this defualt dialpad to be faster then the default Kaisers pad.
Lemme know if this is what you are after.
Click to expand...
Click to collapse
spot on my friend! much appreciated! i do agree that without skin it is faster and what's more important for me it is so much more usable!
thanks!
The registry key posted above by ori_lavee and a soft reset are enough to get back to the original dialpad, which i like better than htc's dialer, but..... 3g video call doesn't work. it's not on the dial pad, it's in the menu, but it doesn't work
RPG0 said:
The registry key posted above by ori_lavee and a soft reset are enough to get back to the original dialpad, which i like better than htc's dialer, but..... 3g video call doesn't work. it's not on the dial pad, it's in the menu, but it doesn't work
Click to expand...
Click to collapse
yes that is the problem
well not for me as I'm not using video calling but i can imagine it is a serious limitation nevertheless
I was just checking in to see if there was a new dialer perhaps that looks like the one on the touch - like the one in the attached jpg in the first photo?
Thanks
Dutty's newest ROM for the Tilt has almost that exact dialer.
Thank you very much! I don't use speed dial but the person who asked me if I could find one complained that speed dial disn't work afterwards - do you know if I just wasn't doing something right.
predo said:
I'll post here instead of making new thread.
I also want to change my current dial pad on vario III. I already have whats presented in first post and want to have something I had on my wizard with WM6 which looked like this. Any ideas how to change to that dialpad?
Click to expand...
Click to collapse
If you want to revert to the standard (and nicer IMHO) WM6 dialpad, just edit the following key :
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled = 0
sebbes said:
If you want to revert to the standard (and nicer IMHO) WM6 dialpad, just edit the following key :
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled = 0
Click to expand...
Click to collapse
Thank you, it works. Now I have a DialPAD I like. After custom ROM I got a Touch DialPAD which somehow missing the Speed Dial key pad.
Was the same for me, and I didnt like the blue background for reading the smartdialer's matching entries
I flashed to dutty's custom Tilt ROM, but would like to change the dialer to one that has a 'contacts' button on it...is it possible to change dialers without reflashing, and if so, where are some good dialers to be found?
If it's just a skinning issue, did you try to see the following key to
[HKEY_LOCAL_MACHINE\Security\phone\skin]
Enabled=0
Its already set to 0....how would I get the default skin back?
... so that's the opposite : what about try with Enabled = 1 ?
(and rebooting)
Basically, is there a cab file out there that will install a different dialer skin?
Try this site http://www.zombienexus.net ,you'll find lots of dialer skins.
Hi guys,
I just bought a htc touch diamond 2. I wanted a different theme on it so I downloaded en installed Manila 2D and aplied the theme I wanted through the usual channels, but after I did that the Touch Flo was gone, the only thing the phone displayed was agenda and contacts, the start menu also went back to just a drop down menu. I did a hard reset to set it back into default settings but why didn't it work?
You may need to go to settings> today > Items (tab at the bottom) > Check the TF3d box.
but is it even possible at all to use manila 2D on the D2?
Edit: I did what you told and it was the TD3D that was dissabled. Thanks
i'm lost. did you want TF3D or M2D?
Barnie25 said:
but is it even possible at all to use manila 2D on the D2?
Edit: I did what you told and it was the TD3D that was dissabled. Thanks
Click to expand...
Click to collapse
No prob bob
EDIT: This thread is old - DIALER is not working with 6.5 ROMS so I removed it. Stay tuned, I'll provide other solution soon.
Thanks a lot for the Rhodium dialer!
Is there a way to add Greek letters on the keys, just like Panosha's Grey Dialer Topaz/HD? I would be grateful if you did!
Thank you so much! (added in the rollup thread)
I do have a little issue here,
I have editted Manila to enable landscape mode, And I cannot get the dialer in landscape,
If I start the dialer from Manila in landscape, The dialer starts in landscape & switches to portrait mode in a few seconds, Any advice?
jeutie said:
Thank you so much! (added in the rollup thread)
I do have a little issue here,
I have editted Manila to enable landscape mode, And I cannot get the dialer in landscape,
If I start the dialer from Manila in landscape, The dialer starts in landscape & switches to portrait mode in a few seconds, Any advice?
Click to expand...
Click to collapse
Try to use GConfig http://forum.xda-developers.com/showthread.php?t=487991 to add dialer as allowed application.
Kinda lame to ask, but can't I do that via a registry edit?
I try to avoid installing even MORE applications on my topaz
First thanks for sharing this!
I've installed it to my German TD2 (HTC Rom). There's one annoying issue: each time my phone disconnects from my car kit there's a message coming up which tells me that I now do have to hold my phone close to my ear (something like that). This message has to be confirmed. I had the same issue with another version of the Rhodium dialer.
Is there a chance to resolve that annoying message?
This looks great, thanks a lot.
Just to let you know, it seems to work fine with WM6.5, doesn't seem to have any problems or conflicts (so far ).
Thanks again
Peace
jcan said:
Is there a way to add Greek letters on the keys, just like Panosha's Grey Dialer Topaz/HD? I would be grateful if you did!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=4370643&postcount=1286
Not sure what planet I was on when I wrote my first reply, or maybe I changed my rom, but I can't seem to get this working on 6.5 custom rom ...
Hi qbus00,
Thanks a lot for the dialer, in general it works great.
Also Manila works now great in landscape.
After installing the Rhodium dialler I've notices the following (unwanted) changes in addition:
1) that on the phone settings tap "advanced" this one tap is now english instead of german.
Q: Can this be switched to german again?
2)The "curtain" that is above the buttons while a call is not there any more.
Q: Is there any way to enable this curtain again?
3) Since I installed this dialer, i always get a notice when I'm disconnecting from my hands free system that I now need to put the mobile to my ear again.
Q: Can this be switched of/disabled ?
Would appriciate your response, maybe some of these effects can be corrected by registry or file exchange???
Thanks
GeScha
GeScha said:
Hi qbus00,
Thanks a lot for the dialer, in general it works great.
Also Manila works now great in landscape.
After installing the Rhodium dialler I've notices the following (unwanted) changes in addition:
1) that on the phone settings tap "advanced" this one tap is now english instead of german.
Q: Can this be switched to german again?
2)The "curtain" that is above the buttons while a call is not there any more.
Q: Is there any way to enable this curtain again?
3) Since I installed this dialer, i always get a notice when I'm disconnecting from my hands free system that I now need to put the mobile to my ear again.
Q: Can this be switched of/disabled ?
Would appriciate your response, maybe some of these effects can be corrected by registry or file exchange???
Click to expand...
Click to collapse
1. This is stripped from WWE ROM and becouse of that texts are in English.
2. Not possible - Rhodium dialer has no curtain
3. This is also Rhodium's feature impossible to disable
Thanks a lot for feedback...I guess I'll live with the Rhodium version.
Also thanks for posting this dialler, it works GREAT!!!!
Hi !
... to looking this : http://forum.xda-developers.com/showthread.php?t=524797
Hi qbus00,
Thanks a lot for the Rhodium dialer!
Does this dialer support other languages, like the celeDialer, for example French, there an external mapping table for your French Name:
a àâä
e éèêê
video call support..?
qbus00 said:
2. Not possible - Rhodium dialer has no curtain
Click to expand...
Click to collapse
@qbus00
Could you be so nice and tell me how i only get rid of the dialer curtain with a regedit?
Or is there a way to remove eveything except for the dialer curtain from this .cab?
I have been searching for a solution, but couldn't find anything. Please help, thank you.
qbus00 said:
Hello!
I was looking for way to have support for landscape dialer. When searching I found this thread: http://forum.xda-developers.com/showthread.php?t=521815.
It contains link to Black Rhodium Dialer cab.
But there are three things which are annoying me with this cab:
1. It has black buttons
2. After installation it replaces taskbar icons
3. Becouse of point 2 you need to install sdkcerts before installing it
I decided to modify this dialer to restore original behaviour and remove taskbar icons.
You can download it from here: http://rapidshare.com/files/254987381/Rhodium_Phone_Dialer.cab
I tested it on TESS ROM (based on Windows Mobile 6.1) so please let me know if it's usable on 6.5 .
And last but not least: DO BACKUP BEFORE INSTALLING THIS CAB (using SPB Backup for example).
Click to expand...
Click to collapse
phcanOverbmp.dll controls the Taskbar icons but I don't see it in the cab file anywhere.
Hi,
I used this dialer on StockROM, as I need landscape support for the Dialer and it basically worked great. Video & ConfCall are supported, Landscape works great.
Unfortunately when I try to install this dialer on dutty's WM6.5 Leo R6 (or R1-R6, same on all). This dialer doesn't work, and The device falls back to Windows default dialer.
The Leo ROM doesn neither support Confcall, nor landscape mode, so I'm looking out for a dialer like this, that works on WM6.5 Leo ROMs.
Any suggestions?
You deleted the cab!
Hey qbus00. I was wondering if you might like to post the cab and the screenshots back up as I was just looking for this and have found that you've deleted it!!
I decided not to upgrade to 6.5 after reading a lot of negative reviews about it on this forum - others may have made the same decision. It would be nice it you could re-post the dialler for us old 6.1 stalwarts.
Many thanks.
left of centre said:
Hey qbus00. I was wondering if you might like to post the cab and the screenshots back up as I was just looking for this and have found that you've deleted it!!
I decided not to upgrade to 6.5 after reading a lot of negative reviews about it on this forum - others may have made the same decision. It would be nice it you could re-post the dialler for us old 6.1 stalwarts.
Many thanks.
Click to expand...
Click to collapse
Seek and ye shall find.
Hi,
is it possible to change the acer dialer by a S2A style dialer?
if yes i would appreciate a cab file plz !!
if not, is it possible that the phone switches to the WM6.5 lockscreen dialer when i have an incoming call ??
thanks for your help.
++
give S2U2 a try, i love it!
i prefer to keep the WM6.5 screenlock.
and the real problem for me is when the screen is not locked, i want a slide to answer (so s2u2 wil not change anything about this?)
++
nogit said:
Hi,
if not, is it possible that the phone switches to the WM6.5 lockscreen dialer when i have an incoming call ??
++
Click to expand...
Click to collapse
Use "SmartLock" . Is the best way to do what you want.
sorry but smartlock is not the solution to my problem...
even if i ask to smartlock to lock with an incoming call, it's the Acer dialer that appears firts and not the WM slide to answer.
There is a simple solution to deactivate Acer Dialer and to use WM Dialer.
Download Advanced Config Go to Phone / Dialer / Disabled
This solved my problem.... Im using resco's contact manager for "slide 2 answer" and acer's call handling was dominant, thats why i had to disable this dialer...
i hope i could help you
riotman said:
There is a simple solution to deactivate Acer Dialer and to use WM Dialer.
Download Advanced Config Go to Phone / Dialer / Disabled
This solved my problem.... Im using resco's contact manager for "slide 2 answer" and acer's call handling was dominant, thats why i had to disable this dialer...
i hope i could help you
Click to expand...
Click to collapse
thanks man,
your method works great, however the resco manager S2A is quite awfull...
has i did not found any skins i would not keep this slider
no way to have a htc dialer cab????????
++
Hi!!
Thanks for the info, but can you post a link to the program?
Thank you!
its a shareware proggie, which can be bought at resco.net
another slide 2 answer proggie which is for free is s2u2, its freeware just google it. many skins can be found on this forums too
Hi!
Thanks for the answer but I was talking about the other program, the one to disable the Acer's dialer Any ideas?
Thank you again!!!
arroba3 said:
Hi!
Thanks for the answer but I was talking about the other program, the one to disable the Acer's dialer Any ideas?
Thank you again!!!
Click to expand...
Click to collapse
here it is:
http://www.touchxperience.com/applications/advanced-configuration-tool/downloads.html
@Riotman
when the phone is not locked with S2U2 and if you have an incoming call, is it the slide to answer of s2u2 or the Acer dialer that appears ??
Oh yeah!!! It works!! I've been searching for ages for a solution to use s2u2's dialer and now it works perfectly!!
Thank you very much!
i think acers call management wont appear anymore if you disable acers dialer via ad config tool. im using phonex atm and acers phone management doesnt appear anymore
have you guys tried stopping the acer dialer from installing in the first place? it is still in the extrom right? so it means that it installs after you set up your device (calibrate screen, input time and date...)
which means if it was not installed in the first place, you can use any dialer you want... i might be wrong though, i have used several acer and eten phones and all of them uses the "push camera button" while the system tries to instal oem cabs to stop it.
try to use Inesoft Dialer