Related
** EDIT **
Aplogies for not crediting ncruz as the one who edited the original files and got this working in the first place!
As per his instructions, and to make everything a bit easier for everyone, I have updated the Himalaya cab file with his updated files
** EDIT **
Thanks to TofClock for the making the cab file! I've just taken his instructions and made them a little easier to follow, I hope he doesnt mind
The Arcsoft mms composer has been extracted from the Universal rom and a cab file was cerated to work with WM 5.0 Blueangel devices.
However this cab won't install on Himalaya devices.
This is because of the following two files
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
TofClock has created his own cab file (which I have now updated to ncruz newest versions) with all other files and reg settings ...
Attached to this post is are two RAR files containing a cab file and 2 dll files.
To install, follow these instructions :
1. Download Himalaya_WM5_MMS.part1.rar and Himalaya_WM5_MMS.part2.rar from this post.
2. Decompress the rar file on your PC using winrar or something similar
3. Soft reset your Himlaya
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on your Himalaya
5. Copy the cab file to your Himalaya and install it.
6. Soft-reset your device again
7. After this , go the messaging application. click on Inbox you should see a new account there called MMS.
If not click on Menu>Tools>New Account
Create a dummy email account (it doesn't matter what info you fill in, just make it up) but at the Account information select MMS as the account type and click next.
Then finish going through the account creation, again for the server information making anything up.
8. Once that is completed clock on Menu>MMS Configuration then click the servers tab.
9. From here fill in your operators server settings (remember to set it as default!) and enjoy MMS on WM5.0!!
Again thanks sooo much for everyone's hard work in getting this working, especially ncruz for the initial work and the BA cab and TofClock for making the Himalaya cab file.
Great, just another thing, thoose files aren't from universal.
First, thoose files are from MY POST, i've reshacked thoose files for qvga devices, so it really pisses me off when people take credits for things they don't to.
Second, at least use my latest rcdll.dll see my post at BA forum.
The one that's in THAT cab has some huge icons. and i have hacked it a little bit more.
Third, i've already resolved the problem of having to create the account by hand.
So, if you really want to do the thing right, get the cab at my post, open wincecab editor, remove rcdll.dll and arcmms.dll, install the cab, then copy the files you've just removed and copy them to \windows.
PS: you can check the original files from universal and see that they aren't the same.
everythin is done as explained before, and no mms account appears
please help me
THankssss
Working with WM2k5_1.60c.00WWE_XDA2_HIMALAYA
thanks mjames_84 for update the cab
GREAT THANKS to ncruz for your good job , without it , i never should made this cab
paketecuento -
Have you tried this previously using ncruz manual installation?
I had trouble with that method and once I tried it even after I used the cab file it wouldn't work I had to hard reset my device and do it again.
If you did try the manual install first then you may have to do the same, it certainly worked for me anyway.
As his cab file worked great once I had removed the two dll files and had done a hard reset.
Of course if you havn't tried the manual installation previously then it could be anything you might need to give more info on what ROM version you're using, software you have installed etc...
working 100%, once updated to 1.60c....
It's strange. On my device every time I try to install the cab file I get an error message while installing. I follow the instuctions as described...
Has anybody dealt with it?
Same problem here
Get a error when I start installing. Says that I should try a different location. I"ve tried my SD and PPC. Nothing works.
Download here
It's worked with my WM5V.1.60c!!!
But i use .dll files from mjames_84 and use .cab file from TofClock. I can send and recieve my MMS!!!
Thank you
I too tried mjames files and had problems.
However I also left mjames .dll files there deleted his cab file and used TofClocks' cab file and I now have working MMS.
Thanks all!
the dll in archive with my cab are same of mjames dll and ncruz dll , i've updated the rar
Hello, thank you for the great work!
But i have a problem, no way to getting it to send messages through Vodafone italy, i had already a Vodafone MMS connection setted up by my QTEK SD Configuration wizard (dloaded from dangaard site) which worked with WM 2003 but i have no way of getting it to work in WM 2005, i keep getting the error message that my mms has not been sent. Anyone can help me please?
Thank you very much
By the way, since i almost haven't any programming skill i have Eng/Ita translation skill ^_^, so if u are interested in translating the WM2005 ROM to ITA let me know, i can help ^_^
Hi overhere,
I did precies what you said at the top,
But when I want to start MMS I get an error about a bad cerificate or something like that... please help...
Klazimodo
It works !
Upgraded to wm 5.0 two days ago.
Installed as per instructions and my MMS's work like a charme.
Thanks guys 8)
Hi guys
I installed it, no problem with installation. Send mms, GPRS Monitor shows that the mms is sending but then I get a error that says unable to send.
What can the problem be?
Use WM5 1.60c and Radio 1.08
Thanks guys
dudes, Himalaya is ****ing full of those WMstuff, so will you people try to do something for ALPINE ?
Or XDA O2IIi ?
hi there
i am not able to install
i have xda2 win2005 1.60c
i downloaded both the rar files unrared these in two dif folders one is called part 1 and the other part2
then i softreset my xda
then i coppied dll files from part1 folder
then i try to install the cab file coopied from my pc to xda
i try to install on system
but message comes up says that MMS.... can not be install
am i doing something wrong here
and y there are two rar files containig the same files
PLZ help
Regards
its working now
thanx
regards
gugi
Hello, ive just upgraded to wm05 and my tomtom 6 worked perfectly before. now when i turn it on the back light goes off instantly. i have tried hex editing it from Backlight to Bbcklight but it comes up with an error when i try to open tomtom then. i have also tried downloading a pre patched one from this forum but still the same error.
Any help would be appreciated.
I have a xdaii
Thanks Andrew
Any help here at all please ive tried my hardest to get this working.
this is the error message i get when i open it with the patched file.
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
fixed it no worries now
andrew88 said:
fixed it no worries now
Click to expand...
Click to collapse
How did you get it working?
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Re: tomtom6 on xdaII
I have the same problem as you have. You said you hex edited tomtom navigator.exe. Which editor you are using and which location you are changing?
Help will be appriciated.
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
andreabix said:
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
Click to expand...
Click to collapse
Try this. I got it from one of the forums
Thanks a lot!!!
This fix worked fine for me.
pparmar said:
Try this. I got it from one of the forums
Click to expand...
Click to collapse
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
I have tried this and still no luck, the fix error message is still coming up, anyone any ideas?
im having the exact same problem
i have downloaded the file TomTom-Backlight-Fix.ZIP
i have copyed the file over to /program files/ navigator/
i am getting the error message
i have also downloaded and installed the fix-error-message.zip
i have extracted the .cab file to the root of the memory card and i have ran it.
it installed sucessfully.
but i am still getting the error message saying that the file is not signed or the components cannot be found.
could you please help me as i need tomtom 6 working as soon as possible
Same Problem
Guys, where does the file go? How do i use it?
Thanks.
Help with tomtom 6
I have a palm treo 650. I just downloaded tomtom 6 and U.S. maps online. I installed tomtom 6 on my phone. (im pretty sure I did it right). I have the navigator symbol and everytime I click it, it says, "tomtom sd card not found".
Well I put a bunch of crap on my sd card and tried it again. I clicked to open the navigator but this time, instead of it saying "tomtom sd card not found", the phone completely shut off on me, then restarted.
I dont know what i am doing.
can someone help me? thanks!
I don't know anything about palm treo 650, but I cleaned the SD card and transfered all tomtom6 files on my desktop computer using card reader. As soon as you insert SD card in to your palm itwill start installing. Try it it might work.
@Fudger: find out where Tomtom Navigator.exe is on your device and replace it by the one posted above.
@oakman: thanks for kicking this thread back up.
I already created another solution for myself, a mortscript that writes to backlight registry keys once Tomtom starts. It is less elegant, backlight flashes and Tomtom starts slower. So
@andrew88 Thanks a lot
Now @All:
I found several solutions on the web for Tomtom turning volume to 70% at start up, but I don't like any of them very much. Anyone who's been able to tweak Tomtom to set it to 100% default?
thanks
very
much
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
still struggling with backlight
Hi. I have TT6 v 6.01. I have an IPAQ 214, and whilst I used TT6 OK on my LOOX 720, I get the "no backlight" problem on the IPAQ. I have seen the suggestions here. Edit Backlight to Bbcklight first. On my TomTom Navigator.exe there is only one occurrence (UTF). I've edited that and saved. The version posted here seems to have only one occurrence too, but the addresses are different. Different release? Tried my edited version and got the error everyone else reports re certificate. So then I looked at the CAB file suggested to fix the error message. How should this be installed? I put it onto my SD card and found it using explorer on PDA. Double clicked and installed it to "device". No good. Then installed it to "File Store". No good. Then put it into Navigator folder and installed it. No good either. Anyone got any other ideas please?
I've got this same issue on an Ipaq 214 with Tomtom 6.
I can see the issue being described with editing the exe with a hex editor to reference the backlight function correctly, and like others I'm getting an issue with the cerfificate of the file.
TomTom6 does not have a cab called Cert_SPSC
How can I fix the certificate error with tomtom 6 ?
I've edited the TomTom Naviator.exe file correctly, and just need to fix the certificate error.
unicode editor
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
how can i get uni-code editor. is it available to download
uni code editor
How can I get uni code editor? I download hex editor but can not see the right code
Thanks,
Hi all
i'm a new rom cooker and i've built my first rom n successfuly flashed it and its all good! One thing i can't find is the Network Setup thing
for example on Duttys Roms when you first boot it asks you to auto setup your Network Provider (Eg Orange UK)
where can i find a cab for this?
also the PACKAGE to use to cook into my rom?
yes i have tried searching but not exactly sure what its called, searching Network Setup doesnt bring anything good up ..
Thanks
Did you try this? Not sure if that is it or not.
ah Dutty made it duuuhhh!! Thats the one many thanks i'll build it myself into a package thanks
Looks like the password for provision.zip is no longer '1234'. Searching and googling didn't locate the new password, does anyone have it?
Connection setup (a.k.a. Network Wizard) is included within my OEM Packages, which can be found in my cooking kit threads.
dang said:
Looks like the password for provision.zip is no longer '1234'. Searching and googling didn't locate the new password, does anyone have it?
Click to expand...
Click to collapse
Found it:
030D681B-1DFC-4bd0-A72A-A9B3CCCDA653
I am able to unzip the new provision.zip with 030D681B-1DFC-4bd0-A72A-A9B3CCCDA653.
I am able to unzip the provision.zip, then the prov.zip and then the individual setting zip files using this PW. But strange thing that is happenning is that when I zip the files again the size of the final provision.zip reduces by about 150KB. And when packed in the Kitchen the utility does not work. where am I going wrong?
Can you kindly guide me?
Actually I was compelled to edit the provision.zip because the settings in it were wrong corresponding to my service provider. So I needed to modify those settings..
c_shekhar said:
I am able to unzip the new provision.zip with 030D681B-1DFC-4bd0-A72A-A9B3CCCDA653.
I am able to unzip the provision.zip, then the prov.zip and then the individual setting zip files using this PW. But strange thing that is happenning is that when I zip the files again the size of the final provision.zip reduces by about 150KB. And when packed in the Kitchen the utility does not work. where am I going wrong?
Can you kindly guide me?
Actually I was compelled to edit the provision.zip because the settings in it were wrong corresponding to my service provider. So I needed to modify those settings..
Click to expand...
Click to collapse
Same problem ...
The problem is how to compress, still looking for something similar to a compression, when replacing manually provision.zip this works ... I do not know why? Someone has some solution?
(Sorry my Google translator)
Hello all ,
I ran into the problem of liking a rom that was protected..
no problem , only thing i want to add was remote tracker.
the rest i do with uc.
So with the help of da_g i striped a kitchen to unpack and repack protected roms.
to add a package , just unpack..put your cab in the dump dir and add it to config????.txt
and repack.
that way i get the use the protected rom with my own package build in.
thought i would post it.
grtx , arnold
hi arnoldl,
i want to thank you and everyone have helped you to create and publish this. i was searching something like this since many time ago, finally i found your thread and i was able to add RT to the rom i use!
i think this will be useful to many other people
i have changed something and it works perfectly with my blackstone!
thank you thank you.
bye
What is the difference in extracting ngh file, adding cab file to dump folder, updataing config.txt and recooking compared to installing the cab file using UC?
Can we add visual kitchen packages to this dump folder? If we can add do we need to just copy all the files in all the folders of the package to dump folder?
eg: in the package there are some files in 0409 and some in files folder , _skip, app.reg, all these goes to dump folder?
Thanks
@DarkRenegade
No problem , happy that i helped...
@kk0813
If i would buy a phone of the street , i would do the folowing.
- check if there are funny things on it
- format the card
- hardreset the phone
and gone is your remote tracker protection..
If i cook rt in, with my personal settings for it.
after a hard-reset it's installed again , so i can still gps find my stolen phone after a complete format.
only next step i want to take is to re-hard spl , to prevent reflashing if posible.
but these days with new 6.5 images coming out so quick i flash so often i will wait with that one
but all other things i install by uc or later shashimi
Don't know if you can add kitchen files.
never tried it.....
btw attached a new version.
remade it to work with the new envirus kitchen the newer 6.5 roms are using..
arnoldl said:
@DarkRenegade
No problem , happy that i helped...
@kk0813
If i would buy a phone of the street , i would do the folowing.
- check if there are funny things on it
- format the card
- hardreset the phone
and gone is your remote tracker protection..
If i cook rt in, with my personal settings for it.
after a hard-reset it's installed again , so i can still gps find my stolen phone after a complete format.
only next step i want to take is to re-hard spl , to prevent reflashing if http://forum.xda-developers.com/showthread.php?t=503112posible.
but these days with new 6.5 images coming out so quick i flash so often i will wait with that one
but all other things i install by uc or later shashimi
Don't know if you can add kitchen files.
never tried it.....
btw attached a new version.
remade it to work with the new envirus kitchen the newer 6.5 roms are using..
Click to expand...
Click to collapse
Thats a nice idea. Thanks for the updated version.
DarkRenegade said:
hi arnoldl,
i want to thank you and everyone have helped you to create and publish this. i was searching something like this since many time ago, finally i found your thread and i was able to add RT to the rom i use!
i think this will be useful to many other people
i have changed something and it works perfectly with my blackstone!
thank you thank you.
bye
Click to expand...
Click to collapse
Thanks again
works very well
arnoldl said:
Hello all ,
I ran into the problem of liking a rom that was protected..
no problem , only thing i want to add was remote tracker.
the rest i do with uc.
So with the help of da_g i striped a kitchen to unpack and repack protected roms.
to add a package , just unpack..put your cab in the dump dir and add it to config????.txt
and repack.
that way i get the use the protected rom with my own package build in.
thought i would post it.
grtx , arnold
Click to expand...
Click to collapse
You have a Trojan horse in first post!!!
All this to add a couple of cabs to a ROM ? Isn't it a whole of a lot easier to just... you know... install them after ? Or maybe even UC them to make it even lazier ?
Does this work with other roms from other devices? Or just Raphael roms?
I tried this but it extracts os.nb and os.nb.payload and also os.nb.extra but when it starts to create dump it fails
this is the log
ImgfsToDump 2.1rc2
Cannot map file imgfs.bin
what to do help
jagan2 said:
I tried this but it extracts os.nb and os.nb.payload and also os.nb.extra but when it starts to create dump it fails
this is the log
ImgfsToDump 2.1rc2
Cannot map file imgfs.bin
what to do help
Click to expand...
Click to collapse
Use the latest version of extractor, place the .nbh file in BaseROM, rename it to RUU_signed.nbh and run the extractor.
That worked for me.
A little late reading this, but I downloaded it to rip a rom from a little known site & guess what... Theres a trojan in that 1st post, virus software just riped it out of 2 kitchens recently downloaded as well as that 1st post file.
file namned Win32/Delfsnif.dx
I used your extractor but when i use old (1,2mb) i have problem with rom (sense 2.5 crash , windows menu crash), when i use new extractor (1,9mb) i don;t have a bootable rom (.nbh is very small 15mb-100mb) Is there any solution?
Sorry for my english I hope you can understand me.
I think there are more usefull tools that could help you.
Let's have a look here : http://forum.xda-developers.com/showthread.php?t=411915
And I believe that this tool is used by most roms makers.
Sorry but this tool is traying to rebuild protected rom into kitchen (with folders - ext, rom, sys etc.) but this is impossible.
Worked Great ! !
It worked great for me!
Moving to general section
You should just move this to the cooking forum. People are always asking if you can modify cooked roms. Then others are always answering that you can't dump and modify a protected rom, which clearly isn't true. So this would work ok in the Cooking forum (can't even remember the name of the forum, even though I'm a mod there, lol).
If this works, than this is pretty kick ass! I was recently trying to simplify the process as you did but your work looks flawless to me! I'll post as soon as I can confirm it works putting the rom back on an HTC rose (htc s743).
After the rom is dumped, what says what files go in what directories? In the dump directory ALL files are in the dump directory and not in the folder structure they would be after the ROM is flashed to the phone. Where would I find what determines the folder structure?
Hi, today i tried to play a video on my HTC Mega, using the default player and I get this error message:
Expression: NULL !=
m_pTimeLineManager
File:
c:\sds\65cm2tmp\private\digitalmedia\wmp\xplatme\clctplayer\collectionplayer.cpp
Line:942
Please please help, i dont want to hard reset my phone again
please have a look at thread 5511316 - sorry but I'm not allowed to post a link.
"I finally found out what causes that error message. It seem if one apply the Mp3 Ringtone Setting Hotfix (_HTC Touch2_MEG02949.exe), this error message will appear. I found this the hard way (by keep on hard reset my Touch2 and applying the fix"
I tried with deinstalling the hotfix, but this will not work - so I unpacked the hotfix exe file and searched the _setup.xml for changes. The hotfix installed a new wmcore.dll - so I renamed this file in Windows directory and the device restart will restore the original DLL - after this the internal media player worked well again without any error messages