Tethering sprint touch pro 2

Tethering sprint touch pro 2 - Touch Pro2 CDMA

I have found this method to enable tethering for the sprint touch pro 2. Does this method still work? Is there a better/safer method?
1 - using file explorer go to Windows\Start Menu\Programs - delete internect connection sharing
2 install - ICS_and_WModem_Fix cab
3. using a regedit program
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
Extension="" Delete the "isext.dll" entry
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection="Sprint"
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
MaxCMCon=0
[HKLM\Services\CMGuardian]
Flags = 4 (it's a DWORD Value. if it doesn't exist. you need to create it)
4 - soft reset
5 - Start the Internet Sharing application.
6 - Select Sprint under type of connection.
7 - Hit Connect In the Internet Sharing application.
8 - Connect to the Laptop/PC via USB
9 - Done. No other applications needs to run on the PC/Laptop.

Related

Try WM5.0 now for free (now without genuine advantage)

Want to try WM5.0 out for your self? I originally posted this on ipaqhq.com but I figured this forum is more of a target for such information .
1) Get the emulator from here (login with your MS passport, then enter MSDEVICE when it asks you for a GuestID)
2) Install the emulator.
3) Delete "C:\Program Files\Microsoft\Device Emulator Preview\PPC_2003_SE\PPC_2003_SE_WWE_ARMv4.bin"
4) Go here (or here without genuine advantage check) to download the WM5.0 SDK (it's 174MB so be patient!).
5) Go here to download ZipZag.
6) Install ZipZag.
7) Go here to download MSI extension support for ZipZag.
8) Extract the above file to "C:\Program Files\ZipZag"
9) Run ZipZag and open "Windows Mobile 5.0 Pocket PC SDK.msi" in it.
10) Sort the files by Size (largest to top)
11) Extract the biggest file (sdkfiles.cab)
12) Using winrar open this file.
13) Sort the files by size (again, largest to top)
14) Extract "_208PPC_USA_bin" to "C:\Program Files\Microsoft\Device Emulator Preview\PPC_2003_SE\PPC_2003_SE_WWE_ARMv4.bin" (the file you deleted earlier!)
15) Go to "Start -> Programs -> Microsoft Device Emulator Preview -> Emulate Pocket PC-WM 2003 SE(Cold Boot)" - Note that the smartphone and square versions WONT WORK!
16) WAIT (about 30 seconds) for it to boot. When faced with the new welcome screen, click on it then wait another 30 or so seconds.
17) Enjoy your sneak-peek of WM5.0!
Attached is a proof shot of it working which also illustrates the newest feature - persistant storage! Thats the new "Memory" control panel application!

Cool Thanks

I have my sneak-peek on my QTek 2020

10x !! i'm testing now !
edit - it's work :lol: !! but limited by the low memory.... how to increase this ?

Emulator is great
@all,
I am using the Mobile Device Emulator at work to test applications before installing on real device. It is great. If you have the latest Visual Studio or other development tool then you have the emulator. It is included. The Mobile SDK you have to download.
Greetings,
Bitfrotter

Can u pls send me an e-mail with the files cuz i cant extract and to anything pls mail me at [email protected]

Do you really want a WM5 emulator now, in 2007, when WM6 is already out!
This is a very old thread (notice the 2005 date stamps) and I'm not sure if you thought this thread referred to something else.

add/modify hosts in wp7

your phone must be jailbreak
1. use ip2base64.exe in attachment to convert ip address to base64 value.
2. Note the base64 result.
3. replace "ipaddr" value in customhosts9.xml(in attachmet) used mention base64 value.
4. modify "hostname.domain" in "hklm\comm\tcpip\hosts\test.com" also in customhosts9.xml.
5. samsung please use "Isolated Storage Explorer GUI.exe" and "DiagProvXMLv0.91_IS.xap" to import provxml, then use Wp7RootTool copy to provxml folder and use *#9908# to apply and execute the provxml.
6. htc please use htc-provxml-deploy.
7. u can use RegistryEditor.xap to check the ipaddr value, only for samsung. u need convert hex to dec.
8. if u want to delete the key or value u must use Wp7RootTool.

[SOLUTION] Samsung Mobile MTP Device -- CODE 10 error at Devicemanager

Hey people...
Just wanted to post a solution to a problem apparently a lot of users are experiencing...
When you first attach your phone to the pc by USB, the drivers have to be installed. (Here is a good ressource, where you can always dowload the latest drivers extracted from the Samsung Kies Package: http://forum.xda-developers.com/showthread.php?t=1655286)
Now it could happen, that all of the drivers install successfully, but one of them, the "Samsung Mobile MTP Device", which cannot be installed, since there's always a CODE 10 (This device cannot start).
As I searched for quite a while for a working solution with no luck (there are different solutions, but none of them worked for me, as in my case it wasn't a faulty-driver problem...), i finally remembered a solution to a similiar case with a DVD-RW Drive. I tried the same process with my actual driver problem, and it worked right away... :good:
HERE's THE SOLUTION:
Go to the Registry Editor (Start --> Run --> "regedit" --> [ENTER])
Search the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\
If you click one of the few subkeys in class (e.g. {4D36E965-E325-11CE-BFC1-08002BE10318}) you'll find the string value (Standard) on the right side with a value (e.g. DVD/CD-ROM-Drives)
You have to find the value "Portable Devices" on the string value (Standard) (In my case {EEC5AD98-8080-425f-922A-DABF3DE3F69A}, but I don't know if they are called always the same.
Once found, you see a string value called UpperFilters --> DELETE IT!
Finished! Now your Samsung Mobile MTP Device should be recognized and even installed correctly right away. (The name of the device changed to GT-I9100 (Devicemanager) in my case...)
Here an explanation about UpperFilters and LowerFilters if you want to know more: http://djlizard.net/2007/04/30/230/
Maybe this short tutorial can save you some time... =)
Best regards to all of you!

Not solved
No such registry subkey as "Portable Devices"
What OS U use?

Thank you for this, was trying to get a Samsung Galaxy Note to connect.
After having to manually point it to the drivers folder, they installed but would not start.
The registry keys seemed a little different to how you described, I am on Windows 7 64-bit, but found:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{EEC5AD98-8080-425F-922A-DABF3DE3F69A}\
Deleted the value "UpperFilters", plugged the USB back in, and it worked!
Now can happily sync using the Samsung Kies software.
( Note to others, backup first, right click the key tree you are editing, choose export. Run the .reg to restore any screw ups. )

I gave up trying to use Kies. I am using windows 7 64. I found the correct folder but there is no value "Upper filter" showing. I also have a Philips Go Gear Muse player and It uses the Songbird software. Songbird also works with the samsung galaxy 4.2 player in mass storage mode.

GREAT
Thanks worked great!!!!
Kinda late though. haha

I have no UpperFilters Key

You legend!!!!
thank you so so much i signed up to this forum just to say thank you, i had tried everything and was reading solutions that i just knew before even trying that they wouldnt work.
anyway i read this seemed exactly what i needed and yes it did work
so thank you very much its been a long week of trying to find fixes for this!!!!!

orlandoxpolice said:
I have no UpperFilters Key
Click to expand...
Click to collapse
Same here no UpperFilters key.
Any other suggestions?

Thanks for this guide, and Eric for linking me to it!

Samsung MTP Driver fix
Thanks for your fix for this problem- it was driving me crazy!
I did find that the only UpperFilters key that needed to be removed was for the USBSTOR entries.
Also, I think that anyone trying this- Make a Reg backup first....
Thanks again.

Use *#7284# to enter PhoneUtil mode, Press (Qualcomm USB Settings), and change it to 'MTP + ADB' mode.
Then MTP should work fine.

sb0 said:
Same here no UpperFilters key.
Any other suggestions?
Click to expand...
Click to collapse
For future reference, restoring to an older cwm backup fixed this issue for me (clean flashing to stock or to other roms DID NOT WORK). However I still do get the message from time to time...
Sent from my SAMSUNG-SGH-I727 using xda premium

LichtiMC said:
... UpperFilters --> DELETE IT!...
Click to expand...
Click to collapse
Thank you! That worked for me too! :good:
You saved my day. :victory:

Samsung Mobile MTP Device Code 10 error - Fix
Samsung Galaxy SII - Epic 4G Touch - SPH-D710
To Fix Driver issue ...
1. Close Kies, if open on your computer
2. Disconnect your phone from the USB port on your computer
3. Ensure USB debugging is selected on your Phone
4. Edit the Registry - Regedit
5. Locate - HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\
6. Right Click 'Class' folder - Select 'Export' - Save as 'Class.reg' to any backup location
7. Select 'Edit', 'Find' - desect 'Keys' and 'Values' in the 'Look at' - type in 'portable devices' in the 'Find what:' field [Hit Enter]
8. It should be found at 'EEC5AD98-8080-425f-922A-DABF3DE3F69A', possibly last subfolder in the 'Class' folder
9. If you see UpperFilters in the 'Name' column .. Delete it.
10. Plug your phone back into the computer via USB
11. The driver should be automatically installed
12. If not, toggle back and forth between Media device (MTP) and Camera (PTP) on your Phone USB PC connection settings, the driver should install automatically - Finished. If you want to use Kies, you should now be able to launch Kies and it should connect automatically.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
13. If you do not see UpperFilters in the 'Name' column .. Create it - Right click on the 'EEC5AD98-8080-425f-922A-DABF3DE3F69A' string
14. Select 'new' 'Multi String Value' .. name it 'UpperFilters'. Double Click on 'UpperFilters' - add the data field as 'anything really' (doesn't matter)
15. Plug your phone back into the computer via USB
16. The driver should try to install and automatically Fail
17. Disconnect your phone from the USB port on your computer
18. Now delete the UpperFilters in the 'Name' column .. that you just created
19. Plug your phone back into the computer via USB
20. The driver should be automatically installed
21. If not, toggle back and forth between Media device (MTP) and Camera (PTP) on your Phone USB PC connection settings, the driver should install automatically - Finished. If you want to use Kies, you should now be able to launch Kies and it should connect automatically.
Hope this helps!

I've had the same problem trying to connect my S3 on Windows 7 64-bit, either with Kies installed or just as a media storage device. None of the above solutions worked for me, but then I read somewhere else on the net to use the original Samsung USB cable and that solved it - I can connect as a media storage device again!
I was using a USB cable from a 3rd party charger, not an official one. There must be something slightly different in the wiring of the proper Samsung USB cables.
Hope this helps someone.
Nathanael

rorycupen said:
Samsung Galaxy SII - Epic 4G Touch - SPH-D710
To Fix Driver issue ...
1. Close Kies, if open on your computer
2. Disconnect your phone from the USB port on your computer
3. Ensure USB debugging is selected on your Phone
4. Edit the Registry - Regedit
5. Locate - HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\
6. Right Click 'Class' folder - Select 'Export' - Save as 'Class.reg' to any backup location
7. Select 'Edit', 'Find' - desect 'Keys' and 'Values' in the 'Look at' - type in 'portable devices' in the 'Find what:' field [Hit Enter]
8. It should be found at 'EEC5AD98-8080-425f-922A-DABF3DE3F69A', possibly last subfolder in the 'Class' folder
9. If you see UpperFilters in the 'Name' column .. Delete it.
10. Plug your phone back into the computer via USB
11. The driver should be automatically installed
12. If not, toggle back and forth between Media device (MTP) and Camera (PTP) on your Phone USB PC connection settings, the driver should install automatically - Finished. If you want to use Kies, you should now be able to launch Kies and it should connect automatically.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
13. If you do not see UpperFilters in the 'Name' column .. Create it - Right click on the 'EEC5AD98-8080-425f-922A-DABF3DE3F69A' string
14. Select 'new' 'Multi String Value' .. name it 'UpperFilters'. Double Click on 'UpperFilters' - add the data field as 'anything really' (doesn't matter)
15. Plug your phone back into the computer via USB
16. The driver should try to install and automatically Fail
17. Disconnect your phone from the USB port on your computer
18. Now delete the UpperFilters in the 'Name' column .. that you just created
19. Plug your phone back into the computer via USB
20. The driver should be automatically installed
21. If not, toggle back and forth between Media device (MTP) and Camera (PTP) on your Phone USB PC connection settings, the driver should install automatically - Finished. If you want to use Kies, you should now be able to launch Kies and it should connect automatically.
Hope this helps!
Click to expand...
Click to collapse
this work for me! thanks

Can't find the registry item
I can't find "Contro l".
Any suggestions?
Thanks!
Ernie Adsett
LichtiMC said:
Hey people...
Just wanted to post a solution to a problem apparently a lot of users are experiencing...
Click to expand...
Click to collapse

Thank you! That worked for me too!

aliasss said:
but this not worked with win xp sp3 can you tell me how to solve it with xp sp3 please !
Click to expand...
Click to collapse
+1

[HOW-TO]Change wifi mac address on mt6589

Hi everyone , this is my first how-to guide
i will try to keep it as clear as possible
NOTE : I will not be held responsible if you change your wifi mac address for illegal purposes.
A backup of your NVRAM is recommended.
Method 1(via Engineering mode)
This method does NOT require ROOT access.
1.Download MTK Engineering Mode shortcut app from here :https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter
2.Turn Off your Wifi .Open MTK Engineering Mode shortcut app and Click MTK Settings.
(Incase you are not able to access Engineering mode, skip to alternate method below)
3.Swipe To Connectivity Tab.
4.Click Wifi
5.Click NVRAM
6.In Byte String Access put values as
addr(h,byte) : 4
length(byte) : 6
7.Click Read. The 12 Digits shown in value(h) field is your current wifi mac address.Better make a note of it.
8.Erase the value(h) field and now put your own 12 digit mac address,
IMPORTANT:
RULES FOR WIFI MAC ADDRESS
1.Should be 12 Digits long only
2.Should have hexadecimal characters only (0-F)
3.Second digit of mac address should be Even Digit only (0 or 2 or 4 or 6 or 8 or A or C or E)
valid example - 0205160F0A3E
invalid example - 016GEABCDF59
9.Click write.
10.Exit to Home, Turn Off and turn On your Wifi Again.
11.Now Check your Wifi mac address in Phone Status.It should be Changed to what you entered in Step 8.
12.To get back your original Mac address, repeat the process with original Mac address value.
Alternate Method
THIS METHOD REQUIRES ROOT ACCESS
1.Get any good File Browser with Root access (https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree)
2.Get this Hex Editor : https://play.google.com/store/apps/details?id=tuba.tools
3.Turnoff your wifi.With the File Browser, browse to /data/nvram/APCFG/APRDEB/
4.Copy the file called WIFI to sdcard twice(one for backup purpose and other to edit)
5.Also note the permissions on the WIFI file (for me it was rw-rw----)
6.Rename this file to WIFI.bak
7.Open the copied WIFI file on sdcard with Hex Editor.
8.Notice your Wifi mac Address from address 04 to 09.Change the values of addresses 04,05,06,07,08,09 each with corresponding 2 digits of your new mac address
IMPORTANT:
RULES FOR WIFI MAC ADDRESS
1.Should be 12 Digits long only
2.Should have hexadecimal characters only (0-F)
3.Second digit of mac address should be Even Digit only (0 or 2 or 4 or 6 or 8 or A or C or E)
valid example - 0205160F0A3E
invalid example - 016GEABCDF59
9.Save it.
10.Now copy this modified WIFI file to /data/nvram/APCFG/APRDEB/
11.Set the permissions you noticed in step 5 to this just copied WIFI file( rw-rw---- in my case)
12.Turn on Your Wifi And check your mac address,it should be changed.
Screenshots coming soon,
If this guide helped you ,Click THANKS button.

chiragjn said:
Hi everyone , this is my first how-to guide
i will try to keep it as clear as possible
NOTE : I will not be held responsible if you change your wifi mac address for illegal purposes.
A backup of your NVRAM is recommended.
Method 1(via Engineering mode)
This method does NOT require ROOT access.
1.Download MTK Engineering Mode shortcut app from here :https://play.google.com/store/apps/details?id=com.themonsterit.EngineerStarter
2.Turn Off your Wifi .Open MTK Engineering Mode shortcut app and Click MTK Settings
.
(Incase you are not able to access Engineering mode, skip to alternate method below)
3.Swipe To Connectivity Tab.
4.Click Wifi
5.Click NVRAM
6.In Byte String Access put values as
addr(h,byte) : 4
length(byte) : 6
7.Click Read. The 12 Digits shown in value(h) field is your current wifi mac address.Better make a note of it.
8.Erase the value(h) field and now put your own 12 digit mac address,
IMPORTANT:
RULES FOR WIFI MAC ADDRESS
1.Should be 12 Digit long only
2.Should have hexadecimal characters only (0-F)
3.Second digit of mac address should be Even Digit only (0 or 2 or 4 or 6 or 8 or A or C or E)
valid example - 0205160F0A3E
invalid example - 016GEABCDF59
9.Click write.
10.Exit to Home, Turn Off and turn On your Wifi Again.
11.Now Check your Wifi mac address in Phone Status.It should be Changed to what you entered in Step 8.
12.To get back your original Mac address, repeat the process with original Mac address value.
Alternate Method
THIS METHOD REQUIRES ROOT ACCESS
1.Get any good File Browser with Root access (https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree)
2.Get this Hex Editor : https://play.google.com/store/apps/details?id=tuba.tools
3.Turnoff your wifi.With the File Browser, browse to /data/nvram/APCFG/APRDEB/
4.Copy the file called WIFI to sdcard twice(once for backup purpose)
5.Also note the permissions on the WIFI file (for me it was rw-rw----)
6.Rename this file to WIFI.bak
7.Open the copied WIFI file on sdcard with Hex Editor.
8.Notice your Wifi mac Address from address 04 to 09.Change the values of addresses 04,05,06,07,08,09 each with corresponding 2 digits of your new mac address
IMPORTANT:
RULES FOR WIFI MAC ADDRESS
1.Should be 12 Digit long only
2.Should have hexadecimal characters only (0-F)
3.Second digit of mac address should be Even Digit only (0 or 2 or 4 or 6 or 8 or A or C or E)
valid example - 0205160F0A3E
invalid example - 016GEABCDF59
9.Save it.
10.Now copy this modified WIFI file to /data/nvram/APCFG/APRDEB/
11.Set the permissions you noticed in step 5 to this just copied WIFI file( rw-rw---- in my case)
12.Turn on Your Wifi And check your mac address,it should be changed.
Screenshots coming soon,
If this guide helped you ,Click THANKS button.
Click to expand...
Click to collapse
Lenovo S920, MT6589 device, data folder is empty. Nevertheless there's a lot of stuff in the folder /dev, but no /APCFG/APRDEB/ route at all either.
The first "non-root" method didn't worked for me either. It changes the MAC but when I am trying to connect to the router with this "new" MAC, which by the way it worked in my Galaxy Note with Cyanogenmod 10.2 installed, the phone can't get internet, although it connects to the router.

mulenguezt said:
Lenovo S920, MT6589 device, data folder is empty. Nevertheless there's a lot of stuff in the folder /dev, but no /APCFG/APRDEB/ route at all either.
Click to expand...
Click to collapse
Now I know that all these "Droids" are not created equal... But, I suspect that your unable to find the /APCFG/APRDEB/ in the /dev Folder... Is 'cause its under the /data Folder....
/data/nvram"/APCFG/APRDEB" -> WIFI & WIFI_CONFIG...
BTW:
2.Turn Off your Wifi .Open MTK Engineering Mode shortcut app and Click MTK Settings
.
(Incase you are not able to access Engineering mode, skip to alternate method below)
3.Swipe To Connectivity Tab.
4.Click Wifi
5.Click NVRAM
6.In Byte String Access put values as
addr(h,byte) : 4
BTW: You messed up... At least so with whatever version of MTK Engineering Mode is currenty on Google play...
length(h,byte) : 6
lenght(byte) : 4
That'll net you the first Four Digits plus the last Eight of your MAC Address... Such as it is.
Though I'll doubt that this too would survive a wipe. Before heading back off to 00:08:22:xx:xx:xx-random-land again...

nice guide but is there any way to permanently change MAC address. it auto Revert back to original MAC address On reboot
Thanks!

ANY IDEA ABOUT THIS ISSUE????
>>Step: Ap Meta Disconnect with target...
>>OK: Exit Meta successfully
>>----------------------------------------------------------------------<<
>>Step:Begin Scan Smart Phone data...
>>Step: Cancel scan Barcode DiagBox.
>>-------------------------------------------------------------------<<
>>Step: Enter Meta Mode && Smart Phone;
>>Step:Begin Scan Smart Phone data...
>>Step: Start to Init AP Nvram Database...
OK: Init AP Nvram Database successfully.
>>Step: Start to Connect with target...
COM port searching and preloader handshake
COM port searching and preloader handshake ok
COM port searching and Kernel handshake
COM port searching and Kernel handshake OK
SP_META_ConnectInMetaMode_r Error: maybe is META_MISC_FAIL_TO_WRITE_BACKUP_RESULT cause...
Error: Connect failed, Exit Meta Mode and turn to next phone.
ERROR!! Go to ST_END statues is: ST_AP
>>Step: Ap Meta Disconnect with target...
>>OK: Exit Meta successfully
>>----------------------------------------------------------------------<<
>>Step:Begin Scan Smart Phone data...
>>Step: Cancel scan Barcode DiagBox.

chamelemac
I know of this app
https://play.google.com/store/apps/details?id=com.cryptotel.chamelemac&hl=en
chamelemac
it changed mac adress for Leva ported Rom perfectly.And it persist through restart of phone.
It will however have "error not compatible device" if device prop is changed to something like "samsung galaxy" etc.

IcemanSR said:
I know of this app
https://play.google.com/store/apps/details?id=com.cryptotel.chamelemac&hl=en
chamelemac
it changed mac adress for Leva ported Rom perfectly.And it persist through restart of phone.
It will however have "error not compatible device" if device prop is changed to something like "samsung galaxy" etc.
Click to expand...
Click to collapse
Worked for me too!!!! Every time i reboot, the last 3 par of HEX char randomly change.
After set the original mac address with Chamelemac, and a reboot, MAC ADDRESS remains!!!!
NOTE: tested and working with MT6595 Zopo zp999 3gb RAM 32gb ROM

5.Click NVRAM
6.In Byte String Access put values as
addr(h,byte) : 4
length(byte) : 6
Ok this works but evidently my info are stored somewhere else. at 4 and 6 I have only zeroes. Programming those worked (it stick after reboot) but didn't fix the issue. Still have the 1st 6 hex the same and the other 6 randomly changed everytime I disable the wifi
Question is, do you have any idea where (at what addres) this string could be stored?
I have an ALPS w806 aka K18
thank you

How could you restore your device.prop or build.prop to its default? I'm encountering an Chamelemac error: "error not compatible device" on my Huawei Y220-U10. I wish you could enlighten me a bit because just last few months I've been able to change my mac address with the use of Chamelemac but now I can't. And i don't know why, maybe application update but it seems like chamelemac is just stuck with version 1.0 . Maybe you know something that could help me. By the way I'd rather use chamelemac other than those posted on the thread because it's easy to use just one click and i could change my mac address instantly. Hope for your response. Thanks in advance!

Ichijoe said:
Now I know that all these "Droids" are not created equal... But, I suspect that your unable to find the /APCFG/APRDEB/ in the /dev Folder... Is 'cause its under the /data Folder....
/data/nvram"/APCFG/APRDEB" -> WIFI & WIFI_CONFIG...
BTW:
2.Turn Off your Wifi .Open MTK Engineering Mode shortcut app and Click MTK Settings
.
(Incase you are not able to access Engineering mode, skip to alternate method below)
3.Swipe To Connectivity Tab.
4.Click Wifi
5.Click NVRAM
6.In Byte String Access put values as
addr(h,byte) : 4
BTW: You messed up... At least so with whatever version of MTK Engineering Mode is currenty on Google play...
length(h,byte) : 6
lenght(byte) : 4
That'll net you the first Four Digits plus the last Eight of your MAC Address... Such as it is.
Though I'll doubt that this too would survive a wipe. Before heading back off to 00:08:22:xx:xx:xx-random-land again...
Click to expand...
Click to collapse
Hi there. This is work to Lenovo TAB2 A8-50F. My Wi-Fi Mac Address is every time when I turn on and connect to Wi-Fi point is automatic changing. Now, I have a fixed Mac Address. Thanks.
What I am do?
Install MTK Engineering Mode app. Then turn off Wi-Fi. Launch MTK EM app > Go to Connectivity Tab > Wi-Fi > NVRAM. Then type at "Byte String Access:".
add(n,byte): 6
length(byte): 4
value(h): 11223344
Then push button Write. Turn on Wi-Fi. Go to check Wi-Fi Mac Address. There must be an 00:00:11:22:33:44. Thanks!

my phone a1 aq4501 processor MT 6582 help me

Thanks a lot. You saved me

the MTK Engineering methods doesnt works for me,, neither does any other method iam trying since past few days. Could anyone help? I have a Infinix hot 4 pro

/data/nvram does no texist in my system and nothing hapend when i create it a put the file exist another way for fix it? i try install another roms but only one work but imei wifi BT dont work, i can not intall many roms my phone and PC dont install good the preloader driver. i just can use the fastboot and only one rom can be intalled sucses whit that bug i'm sad

I click write many times but it doesn't change. Crap

TheDarkLord098 said:
I click write many times but it doesn't change. Crap
Click to expand...
Click to collapse
I too am stuck here with you.

daveburnt said:
I too am stuck here with you.
Click to expand...
Click to collapse
Sucks really ?

Thanks a lot.

Last resort
If you are unable to change your MAC with those methods, I found a working solution that should work for everyone. Try this: http://bbs.infinixmobility.com/forum.php?mod=viewthread&action=printable&tid=13678 It worked for me when anything I tried didn't work.

Hi,
I'm sorry, but the files below are not found:/data/nvram/APCFG/APRDEB/
any other solution?
Thanks

[How To] Write a PRL to V20

WARNING I AM NOT RESPONSIBLE FOR WHAT YOU DO TO YOUR DEVICE
MESSING WITH NV ITEMS CAN CAUSE SERIOUS DAMAGE TO YOUR HANDSET
USING THIS TOOL/INFO TO BREAK THE LAW IS NOT CONDONED
USING THIS TO VIOLATE YOUR CARRIERS TERMS IS NOT CONDONED
I WILL NOT HELP WITH WRITING ANYTHING TO YOUR DEVICE OTHER THEN A PRL
I DO NOT PROVIDE ANY LINKS TO THE PRL OR TOOLS USED. USE GOOGLE SEARCH BOLD ITEMS + XDA BELOW!
1. LG Drivers installed, Diag drivers specifically
2. MSL for your phone
3. QPST installed ( 2.7 or newer preferred )
4. SPRINT/VZW PRL file of your choice ( Sprint is on 54xxx) Universal sprint VZW is 00001 00002 etc, be careful as those can piss off your carrier!
Step 1 - Install your LG drivers and acquire your MSL from sprint.
Step 2 - Google and install QPST.
Step 3 - Find what PRL you want to use and put it in a folder on your computer.
Step 4 - Turn off USB debugging on your phone...go to settings > applications > development > uncheck USB debugging
Step 5 - Open the dialer on your phone and enter ##3424# Turn Diag ON
Step 6 - Connect your phone to the computer and select Charging only if prompted.
Step 7 - Open QPST Configuration wherever you installed it.
Step 8 - Click on "Add new port"
Step 9 - UN-Check "Select Serial and USB/Diagnostic Ports Only"
Step 10 - Select your phone on the list and hit OK.
Step 11 - Select your phone on the list.
Step 12 - Click on the "Start Clients" tab at the top and select "Service Programming"
Step 13 - Select your phone on the list and hit OK
Step 14 - Click on "Read from Phone' in the bottom left
Step 15 - Enter your MSL when prompted and hit OK
Step 16 - Click on the "Roam" tab then click "Browse" and navigate to your PRL file. After selecting your PRL click "Write to Phone".
Step 17 - Your phone will reboot at this point and you will see a couple popups on your computer that you can just hit OK to close. Let your phone reboot and don't close QPST until it is finished writing to your phone.
Step 18 - The PRL should be written to your phone now. You can verify it by going to settings > General > About Phone > Status
Once back on sprint prl, you should be able to UPDATE prl and get it to update to the one for your act/area!
Pleas feel free to post results or if you had to do something different!

This is also another option, but i haven't found a way to get it to locate a prl and write it.
maybe some oter people can figure out how to get this to work from the handset?
Ive tried running in production mode, in dev mode, made changes from user to debug and dev in the build.prop
but its still a blank screen when you try it.
using quick setting app you can search ( SPRO ) and click the 1st entry. This isn't for new users so stay outta this stuff lol!
the full entry is com.lge.lgdmsclient.ui.test.SPROmadmHiddenMenuForSprint
in a nutshell it would be exploiting a prl write test to get it to actually write a dif. prl

Verified that Cmda Workshop Trail will write the prl also, it wasn't mentioned in op due to it is NOT FREE, and will require a purchase after 30 days.

You sir are a boss

verizon users are stuck as usual

Database Info

welcome