I have 3 htc trinity's an all 3 have the same problem of the screen clip in the motherboard missing an ideas on how I could get something to make the screen come on an stay on one screen was replaced but the clip section has been broken so any ideas would be more than greatfull !!!!!!
(if pictures are required I wil post them up when I get a chance)
Related
Has anyone got a spare or cheap clip that holds the ribbon for the screen to the main board as mine snapped in half and now the screen wil not turn on at all.
What i did is took the whole thing apart and went to change the sceen as mine had a scrape on it but when i diconected the clip it broke into two so now there is no clip on it and it does not seem to work can anyone help ???
If pictures are required please let me know.
Many thanks
Glenn
Hey guys i am planning to change my Diamond's Housing from black to white and i found someone ready to supply me with one. recently i went through the assembly and disassembly guide and i am finding it very risky to change it as per that instructions because its saying to strip down each and every single part of the Diamond. So i am really worried, i have bruised my diamonds edges really bad so i cant even afford to leave it as such. The other bad thing is that my Diamond is Indian ( 1 cam only) so it kinda has small changes which i wont get to know until my hands get dirty stripping it down, So can anyone walk me through easily about the process of changing the housing alone or will HTC Change the housing if i ask them and tell them that i have another spare housing already, if yes how much might they charge??
Please help me out guys
Dear XDA'ers,
Earlier this year my wife somehow broke her screen. Her screen still worked and the touch screen also worked, even the parts where the screen was cracked functioned without any problems.
After a while she got jealous of my HTC Sensation with its not-cracked-screen so she decided to do some digging and ordered "NEW TOUCH SCREEN DIGITIZER FOR HTC DESIRE HD A9191 G10 + tools" of ebay (itemnumber =190662521121).
I followed a video on youtube (video id = jG6RLR_tAEs ) to replace the screen but now I am stuck at the seperating the lcd from the digitizer part.
My wife wanted to try seperating it and ended up breaking the outer glass even more so now I think we need an LCD too.
In the video the guy also said he had trouble seperating the two and ended up ordering the chassis+lcd+touch screen digitizer. I want to do the same thing since all the prying messed up the chassis as well.
Does anyone know where I can get my hands on a complete set and also wheather or not my story makes sense. I haven't had much experience replacing screens on smartphones so if anyone has some tips, they're much appreciated.
Thanks in advance.
Why don't you ask the guy in the video?
Thanks for the tip, I did and he linked me to this:
ebay DOT com /itm/New-LCD-Display-Touch-Screen-Digitizer-Assembly-for-HTC-Desire-HD-G10-A9191-/221076191455?pt=LH_DefaultDomain_0&hash=item33792af8df
Hi there I bought a HTC sensation XE beats audio phone the screen wouldn't work so I have put a new digitizer plus new LCD display. After fitting these the touch didn't work still so I took apart and noticed that the clip had broke off where the ribbon slotted in so I bought a new top PCB board and transfered this into the handset but still the touch don't work. I did however find a small resistor stuck to the tape that was stuck on the ribbon that connects the 2 PCB boards together. Now it looks silver on the edges and is a cream colour in the middle its not a tiny 1 either so I could solder it back on but I have no idea where it goes as there's no obvious place it was fitted to. Has any body got some clear shots of the main PCB where the sim card fits ? Need to compare them please thanks
donnypaul said:
Hi there I bought a HTC sensation XE beats audio phone the screen wouldn't work so I have put a new digitizer plus new LCD display. After fitting these the touch didn't work still so I took apart and noticed that the clip had broke off where the ribbon slotted in so I bought a new top PCB board and transfered this into the handset but still the touch don't work. I did however find a small resistor stuck to the tape that was stuck on the ribbon that connects the 2 PCB boards together. Now it looks silver on the edges and is a cream colour in the middle its not a tiny 1 either so I could solder it back on but I have no idea where it goes as there's no obvious place it was fitted to. Has any body got some clear shots of the main PCB where the sim card fits ? Need to compare them please thanks
Click to expand...
Click to collapse
heyyy, why yo doin all these strange deedz??!
see, i'd got exactly the same issue (i think). all u need ta do is this:
use ur battery however u want all the way, til it gets shut down. n then put the battery out n press the power button like as if u were trying to turn on the phone, then let it stay still over a night (without the battery) then plug it in charge, but BEWARE YOU WILL NOT TOUCH THE SCREEN NO WAY UNTIL IT IS FULLY CHARGED!
now ur problem must be gone! mine did!
--------------------------------------------------------------------------------------------
that pretty "thanks" button's waiting for u if i helped
Sent from a shaken up HTC Sensation XE using..... whatever! differs?!
I will put the phone back together and try that out but still want to know where that resistor goes lol
Hi all, phone had a nasty tumble and front screen is cracked, but still works fine. is it possible to change only just the front glass and not the whole screen? saw a few to buy on aliexpress http://www.aliexpress.com/item/For-..._8&btsid=4c706082-2885-4b18-a04d-62e15cedea46
checkout parts4repair.com
replacement??
pls confirm whether this thing fits. any indian seller selling the same??
you can try: http://vifocal.com/lcd-display-touch-digitizer-screen-replace-for-huawei-honor-6-smartphone.html
Hi guys,
I'll bring this zombie topic back to life
So have any of you changed the lcd screen themselves?
How many connectors are there on the screen assembly?
I can clearly see just one in the middle of the phone next to the battery.
When I connect the new screen and turn on the phone - the vibro squeaks as in normal boot, but the screen doesn't light up.
My first guess was that I got a faulty screen so now I'm checking the second one and it does the same...
Is there anything I'm missing?
Thanks!