Related
i just bought my tilt, just flashed to dutty v3 room and now i get a weird text every 4 mins. the number is 111145643 and it says wvi1 1.1 1111. is there anyway i can stop that text?
thanks!
Hmm I think you should call your carrier. Unless your phone is somehow sending itself a message, the kaiser probably isn't the culprit.
did you have express mail setup? if so you have to reinstall it on the phone then log onto the express mail server and delete the connection that you made for push e-mail or turn off push, then uninstall express mail on the phone and reset. you should be OK
^^I stand corrected!
I think that is for the IM+ program that ATT provides on their roms for im. The company is called wireless village i believe. I was bugged by it for a while, well the full hour I had my device before I flashed schaps!
I use Palringo until trillian gets a clue about wireless devices. It can sync with AIM, Yahoo, MSN, Gtalk, and others.
BTW, It uses data instead of sms to send messages like the IM+ does.
i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.
gimini said:
i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.
Click to expand...
Click to collapse
its not necessarily a side affect of flashing, it can go away if you reinstall the app that was on the old rom that is causing it... its something that was installed on your previous rom that used silent sms to alert the program to perform a specific function. LIke PTT, expressmail, or the cing/att IM client (to tired to remember the name)... When these programs are running your phone will recieve a ghost message that is only read by the app to wake it up. Alot of these problems were seen in the hermes thread and PTT.
Nope....That is what you get when someone tries to PTT you. Without PTT you get an SMS message. The way PTT works is basically Voice MMS messaging with a trigger to open & close the voice connection (PTT Button) Those digits you see are altered SMS addresses, they are altered so that PTT can recognize them & shift it from SMS to PTT.
Agin, whenever you kill PTT, you lose the ability to decipher the modified address & hence, it's received as a MMS instead. The reason you keep getting it is because the request that was sent retries a certain number of times before failing.
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Well, that would make Dutty's never ending post even longer. We should save that post for other problems directly regarding the rom, and comments on new updates.
Beside, I believe the problem has nothing to do with Dutty's V3, it work flawlessly for me.
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Wow man take a breath! Your gonna get an ulcer.
to his defense i havn't seen this question in dutty's thread at all. and i've only seen it once but not onthe kairser forums. so cut him a lil slack. plus we all learn something from it...ptt or express mail can cause this. thats sure something i didnt know. hope all is well now...enjoy your device sir.
This question was answered on the hermes forum. That is how I solved my issue. I still believe it deals with the IM app from att that uses wireless village. Ill try to find some links to help get it solved.
I couldnt find the thread in the hermes section that described the issue. It might be from OZ messanger and not IM+. It is the version that comes preinstalled from the ATT rom. It is designed to use sms to im therefore making ATT more money.
I had the same text messages when I first got the Kaiser and ran the im software. I believe my test message had a different set of numbers at the end.
Here is a link to Wireless Village. They are a group that is promoting interoperability between handsets for a variety of functions (IM included).
http://www.openmobilealliance.org/tech/affiliates/wv/wvindex.html
EDIT:
I found this article from the cingular...er...ATT forums. This is the issue I originally had and the same text from the same number. The issue below is because OZ messenger was closed and not properly exited.
http://forums.cingular.com/cng/board/message?board.id=samsung&message.id=16362
I spent all day yesterday figuring this out. I downloaded and install the .cab file to my storage card and then logged into the IM program (OZ). After signing out, it kept me logged into all 3 services (Yahoo, AIM, and MSN) and then I proceeded to receive 40+ text (SMS) messages b/c it was trying to "reach me". After sitting on the phone for about an hour and half with a great Data Service Tech Rep, we figured it out and now the IM program works just fine.
~
I'm getting the message from 1111470400 and all it says is WVCI 1.1 333.
~
LISTEN IT KEEPS TEXTING ME AND IT WONT STOP.
HERE IS THE NUMBER ITS FROM AND WHAT IT SAYS
1111470600
WVCI 1.1 333
Click to expand...
Click to collapse
From the 8525 forum
http://forums.cingular.com/cng/board/message?board.id=samsung&thread.id=33273&view=by_date_ascending&page=1
Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
You know - Generally I don't get into these types of little spit / spat arguments - but today you have caught me at the perfect time.
Martinhdk - you are the type of person that makes dealing with the public so hard. You complain about things that aren't even worth complaining about. Sure - it was Dutty's ROM, but in essence had absolutely nothing to do with the ROM, it's probably the push to talk causing the issue. (Because I have the same issue) You had to try and prove yourself by spouting off and telling someone how to run things, when really, you were in the wrong.
Sometimes people get anxious and maybe don't do as much searching as they possibly should. Big DEAL - you are in a forum and since forums began it has been a problem. Does this require that you lay into the guy and tell him how stupid his question is? NO, it doesn't. You must be one very unhappy individual who probably lives a very lonely life - do us all a favor, in the future; keep your comments to yourself and let the moderators do their job.
I apologize to XDA - I know this thread / forum is not used for this. I just feel that sometimes these guys who insult someone younger / or maybe just not as experienced have a tendency to scare these guys away and I don't feel that is right.
i had the same exprience , its not the problem with your carrier , its the ATT IM+ app , if you exit the app w/o logging out of messenger app you keep getting this wierd msg , i tried unintsallng the app but no luck , finally i relashed a new rom and the error went away.
SOLUTION
What you do is you sign in to AIM at a desktop computer, the screenname you signed in on your phone. than a message will pop up saying you are signed in at two places and if you reply to that window with "1" it will sign you out at the other location, your phone. that should stop the messages.
the AIM service on your phone used txt msgs and when you close the program without first signing out. it usually causes that problem.
Stealth message?
I've heard of this so called "stealth" text message used by the carriers to send commands to the phone. My next question is - is it possible to send one of these so called "Stealth" messages from a phone to anther phone - with the proper instructions encoded in the text msg to automatically appear either on the users screen or in their inbox? I have heard this is possible but am very interested if someone could provide me a little more insight on it....
It's possible, it's been done. Would you like to know how? How do you want to send the malicious code? BT? WIFI? MMS? Maybe I can get you my bank account number & ssn while I'm at it?
There are other forums for that type of stuff, some proggies to do this are actually security auditing tools. Most all means though require the user to acknowledge receipt of whatever you send & then require them to execute it. However, I sincerely doubt that anyone here is going to give you any means to do something that may harm someone's device. Sure, you just want to play a prank, but how about the guy you then teach it to?
Hi all, was wondering if I could enlist your help?
I have an Orange Tytn II and would like some feedback as to what people think is
- the best regeditor
- the best set of useful plugins - including updating to WM6.1
- the best source of skins
for the Tytn II
thank you.
Any thoughts would be much appreciated...
richardS said:
Hi all, was wondering if I could enlist your help?
I have an Orange Tytn II and would like to;
- find available plugins which might include - skins and ways to upload, - Change the battery icon to a useful icon of a battery - rather than Orange one
- Change the time that the screen stays on when I'm on a call - so a reg editor
- Maybe upgrade to WM6.1 (without changing Orange menus etc)
Any thoughts would be much appreciated...
Click to expand...
Click to collapse
All your questions are answered here
And the first topics in first page of the kaiser forum.
I dont want to sound like a ass, but did you look around at all first? All of that is easy to find, well not the upgrade because you will not get that util your service provider comes out with that unless you want a new cooked rom.
Ok..sorry, obviously not clear enough.
I would like some feedback as to what people think is
- the best regeditor
- the best set of useful plugins - including updating to WM6.1
- the best source of skins
for the Tytn II
thank you.
PS - have been reading this forum for hours and as I am sure you can appreciate I am trying to cut through the chaff, not unreasonable wouldn't you say?
richardS said:
Ok..sorry, obviously not clear enough.
I would like some feedback as to what people think is
- the best regeditor
- the best set of useful plugins - including updating to WM6.1
- the best source of skins
for the Tytn II
thank you.
PS - have been reading this forum for hours and as I am sure you can appreciate I am trying to cut through the chaff, not unreasonable wouldn't you say?
Click to expand...
Click to collapse
NO. Search and read some more before you ask...
Now ya all ganging up on me...
easy isn't it to say "RTFM".... and makes you look so good too...
I bet the Wiki will find you all the answers, and if not, the search will.
But seriously, quoting the post above you, or quoting in a thread with one single topic is almost as annoying...
richardS said:
Ok..sorry, obviously not clear enough.
I would like some feedback as to what people think is
- the best regeditor
- the best set of useful plugins - including updating to WM6.1
- the best source of skins
for the Tytn II
thank you.
PS - have been reading this forum for hours and as I am sure you can appreciate I am trying to cut through the chaff, not unreasonable wouldn't you say?
Click to expand...
Click to collapse
1) FdcSoft Task Manager
2) You need to Flash your rom to upgrade to 6.1. (so you will lose your orange stuff).
3) Varies on what you like. You will have to search on this, im affraid.
I think it makes you look good too that you don't care enough to do your own legwork. There is more than "hours" of reading here... try DAYS.
PS - have been reading this forum for hours and as I am sure you can appreciate I am trying to cut through the chaff, not unreasonable wouldn't you say?
Click to expand...
Click to collapse
Cut through the chaff? Maybe now you can see why there is SOOO much chaff! So yes, it is unreasonable to just start a thread because you don't care to search, try, dig deeper and go for it.
There are skins threads out the butt around here.
A regedit cab? Try PHM RegEdit
Cabs??? What do you call useful? How would WE know what YOU think is useful? There are 1,000's of cabs to install. Are you into photos? Music? GPS? Games? Putty? Contacts? What is it that YOU want?
Find your cabs by searching.... here is a starting point for you:
http://www.google.com/search?as_q=c.../forum.xda-developers.com&as_rights=&safe=off
http://forum.xda-developers.com/showthread.php?t=316183
http://forum.xda-developers.com/showthread.php?t=248409
http://forum.xda-developers.com/showthread.php?t=308773
How many pages shall I find for you? You didn't specify.
If you don't feel like helping yourself, you can start a new thread or reply to this one.
Okay, here is your one free "I'm too lazy to search & read" answer. I personally would've saved it for a "my device is bricked" question, but hey!
I use resco explorer. It is in my opinion the best file explorer & as a bonus it comes with one of the best & friendliest to use registry explorers & editors. Resco also allows you to easily network you computer to your PPC.
I get my full length battery bar, enhcanced scrolling & a much more effective X-button using SPB Pocket Plus. I have deleted the today plug-in portion of the app. so the size is more reasonable. This will also give you multi-tab browsing capability & allow you to use the ok button or X-button to only close one PIE page at a time.
There are tons of theme skins available, but why you would ask about those is beyond me. What's good depends on what you like because they range from plain black to cars to naked women. So, you're on your own there. Start with the "Show us your today screen thread" there are links to tens of thousands of themes there.
Also, get kaiser tweak & the current xml file for it.
WM6.1: If you're not up to flashing yet, you can still add some of the functionality of 6.1 to your stock rom. I suggest getting the PIE6.1 cab file. This will add zoom & overview capability to you current PIE edition. Also take a look at the current Arcsoft 5.0 version. This will add the Voicemail MMS option to MMS text messaging. (as of yet it still won't give you threaded messaging).
A hint for the future. Always search & read first. You can use search, then find a thread & once in the thread there is a search this thread button that will further help you slim down the amount of reading you have to do, it's called "search this thread" & will only return results for the thread you're currently in.
Also use the exclusion feature of advanced search. Highlight the forums that are pertinent to what you're asking. That way you don't get Blue Angel returns for your Kaiser question. I have over three hundred posts. If you look at my posts I don't think I've ever been flamed & I've helped several people with problems even from day one, because maybe I just read an answer that was no help to me, but was exactly what the next guy was looking for. It doesn't pay to be selfish here because everyone has issues, not just you & we've all had to read & work through them. What makes you able to say, hey I deserve an answer without reading (cut through the chaff) when most everyone else has taken the hard path & learned along the way.
Believe me that the reading will pay off in spades. You WILL have MORE problems with your Kaiser. Nature of the beast. I can't tell you how many times I've answered my own question because something I'd read earlier popped back into my mind. Reading will save you time in the long run & helps to keep the boards free of clutter.
That said, good luck with your new Kaiser.
It is just me, or does anyone else receive SPAM email in their personal email accounts?
Hey Grizzz,
Dang man we're opposites! You burn him down then soften the landing, where I like to raise him up then take out the knees! Either way it makes much more sense to do it one of those two ways.
Sure, I know the Noobie needs to have his wrist smacked, but why not do it in a way that ends the thread, like you or I do. Just reprimanding the kiddie does nothing but waste space. So help a Noobie out, take him under your wing & show him how things are done. Don't just reprimand him.
Maybe somew of the +1000 post old timers used to be like us too? Could they have become callus to where they came from? Except of course peep's like cmonex, Jockey, Dutty, Meinyysis, Olipro (I think they were all spawn with a pda in there hand & I heard that Oli's middle name was CE, lol...
You are right. But in the "old" days - AKA Hermes Forum one year ago FLAMING was hard and cruel . A noooob got FLAMED if he had not done his homework - and I find it was actually OK.
I remember reading for DAYS to find out how to FLASH, and IF I had any questions - I asked in a PM or in the specific thread....
I remember a long discussion about having limits for newies so they could not write in the Forum for some time after they joined to make sure they used some time reading before asking the same questions again and again...
Martinhdk said:
You are right. But in the "old" days - AKA Hermes Forum one year ago FLAMING was hard and cruel . A noooob got FLAMED if he had not done his homework - and I find it was actually OK.
I remember reading for DAYS to find out how to FLASH, and IF I had any questions - I asked in a PM or in the specific thread....
I remember a long discussion about having limits for newies so they could not write in the Forum for some time after they joined to make sure they used some time reading before asking the same questions again and again...
Click to expand...
Click to collapse
Yeah, I remember lurking in Hermes afraid to ask. I once even PM'd Meinyysis & bit my nails for days hoping that the response wouldn't be "Go Die". Not that he'd ever do anything like that, but Hermes forum was brutal at times.
I dont understand why people are hesitating to help instead enjoy having the attitude and reply harsh. If a thread is unnecessary, then the moderator can lock the thread.
This person was looking for some openion. He is not asking how to install something.
1) If you dont want to reply, ignore the post
2) If you care this site and feel the thread is unnecessary, PM mod and ask him to lock the thread
3) To control these kinds of thread and you really get annoyed to answer question which you asked when you were actually a newbee, try to organize this site. Evaluate the members before they join.
One smart person gave the link for search. What an attitude. I am not sure what he is thinking about himself. I seriously hate the attitude of some people here.
MartinH - Please dont feel that all the posts are directed to you.
richardS said:
Now ya all ganging up on me...
easy isn't it to say "RTFM".... and makes you look so good too...
Click to expand...
Click to collapse
Ah, to live life unencumbered with things like common sense...
In newbie's defense...
I haven't asked any questions and I search the threads and wiki's, but I have to say that this forum is not the easiest thing to find anything in because every thread is packed full of non sense that has nothing to do with the topic. The guy simply asked if there was a way to find plugins and such.
Give the guy a break and just send him a link . I wish there was a better search engine on this forum, but there isn't so I continue to read...and read and read...
jtb74129 said:
I haven't asked any questions and I search the threads and wiki's, but I have to say that this forum is not the easiest thing to find anything in because every thread is packed full of non sense that has nothing to do with the topic. The guy simply asked if there was a way to find plugins and such.
Give the guy a break and just send him a link . I wish there was a better search engine on this forum, but there isn't so I continue to read...and read and read...
Click to expand...
Click to collapse
vBulletin has a bad search function itself. However there's a advance google search that correctly search the site,
i have the tytn ii and am very new to it
im looking to put message/alert tones on but dont know where to put them..
ive got a few good alerts that id like to put there....ie. new email/message that sort of stuff
please could someone show me the way to go on
thanks in advance
I am a member of various forums, and mod two with more members than this forum. Here's my thoughts;
This forum is full of useful info, but it's also buried amongst huge piles of crap and spam
1) vBulletin software sucks...try IP.B
2) If you feel the urge to reply, reply with something useful
3) If you feel the thread is a waste of time don't add your spam to it. It makes you look more of an arse than the poster; Martinhdk and we3zy
4) Post counts mean nothing, see point 3)
for the persons who actually added useful info to this thread, then thank you, you know who you are.
To the Mods..I've copy and pasted the useful info, so by all means delete this thread, as no one found it useful but me... and save this forum getting more cluttered.
Hi there,
If you've all seen a standard Samsung phone, you'll have noticed that you can put a security code/PIN number on your items (Photos, messages etc..).
I was wondering if there was any application or feature out there that means I could impose one of these onto my WM6.1 Polaris? Everyone looks at my phone and every can read all my messages! When I go to look at their inferior phones... They have codes!
Any help is appreciated.
Bumped. Any ideas?
No-one? I'd really like to find an answer.
I remember a new program posted not long ago, that should do what you are looking for. It was posted in Development and Hacking and I think the name was just 'lock'. You then have to make all your links to your messages into links to this lock program, which will ask for a code and then redirect you to your messages. It will still be possible to launch tmail.exe in the Windows directory directly (but I don't think a lot of people will have any clue on how to do this anyway).
http://forum.xda-developers.com/showthread.php?t=409135&highlight=sms+lock
hope that helps
Hello, everyone! I'm new to this great site, and would like to say thank you for so many inspiring posts.
I encountered a big problem --- perhaps it's been discussed before, but I cannot find the answer after trying to search the forum.
I've been a Symbian UIQ users for years. Just 3 weeks ago I purchased my first WM phone HTC Max4G.
For an elderly newby like me, I must confess that using WinMo 6.1 is a frustrating experience. I have lots of questions, but please allow me to bring up the biggest one:
I realized that in one contact only ONE mobile phone number is allowed....?! It's hard to believe! Many people have several mobile numbers (dont' you?) In UIQ you can add as many numbers as you want, and for all types of numbers.
Would you please tell me how to solve this problem?
Or, is there any program to replace the WM6.1 contacts?
(In UIQ3 there's a fantastic useful program called DreamConnect; worth every penny)
...I bought this new phone only for sake of the cool big 3.8" display. Now I feel desperate.
p.s. English is my 4th foreign language. Please don't mind my grammar.
Begovaya said:
Hello, everyone! I'm new to this great site, and would like to say thank you for so many inspiring posts.
I encountered a big problem --- perhaps it's been discussed before, but I cannot find the answer after trying to search the forum.
I've been a Symbian UIQ users for years. Just 3 weeks ago I purchased my first WM phone HTC Max4G.
....
p.s. English is my 4th foreign language. Please don't mind my grammar.
Click to expand...
Click to collapse
first of all luck you ... A htc max4g ... i'm sitting drooling here.
as far as your problem goes i believe the reason for that is because you are saving contact to sim and when a contact is saved to sim card only one number is allowed. Now if you created the contact on device memory you will be able to have mutliple numbers, picture, email address, actual address, etc etc. of that one contact under a contact
Hope this helps out.
It just works a bit differnt in WM.
Just like in Outlook itself, you can add a HOME PHONE#, a BUSINESS PHONE#, a MOBILE PHONE#. This has to do with synchronization.
If you need more than 1 MOBILE PHONE#, simply add the contacts main mobile number under MOBILE and all others under OTHER NUMBER's - you still can pick them when writing SMS or when calling, they are just not labeled MOBILE ... that's it.
I hope that helps?
BTW:
If you have 'lots of questions' and you can't find the answers, please combine as many questions as possible in 1 single post - that helps keeping the forum clean and reduces the amount of threads.
Junner2003 said:
It just works a bit differnt in WM.
Just like in Outlook itself, you can add a HOME PHONE#, a BUSINESS PHONE#, a MOBILE PHONE#. This has to do with synchronization.
If you need more than 1 MOBILE PHONE#, simply add the contacts main mobile number under MOBILE and all others under OTHER NUMBER's - you still can pick them when writing SMS or when calling, they are just not labeled MOBILE ... that's it.
I hope that helps?
BTW:
If you have 'lots of questions' and you can't find the answers, please combine as many questions as possible in 1 single post - that helps keeping the forum clean and reduces the amount of threads.
Click to expand...
Click to collapse
This isn't all completely true.....
If i were to enter a number into work i couldn't choose to send a text message to it from the "contacts" page.
Thank you, thesire, junner & joel,
Indeed I save all my contacts on device memory, not on SIM card.
Yes, after synchronization from my UIQ3 phone to Outlook, all the HOME MOBILE numbers are lost... (cry). I have around 1800 contacts and I don't know what to do now.
Yes, these days I try to manually move some numbers from SE P1i to HTC Max. It is soooooo inconvenient not able to distinguish HOME MOBILE# from OFFICE MOBILE#. (scream)
I have to move some mobile# to other cells as you mentioned, but quantity of those cells is also limited, isn't it?
Some of my contacts have more than 10 mobile# since I include numbers of his, his wife, his driver and his secretaries altogether, for whom I don't want to create separate contacts. Symbian has no problem with this at all. Symbian also allows me to add comment after the telephone numbers.
WHY is Outlook & WinMo so idiotic???
I will post other questions later within this thread, in order to keep this forum clean. Thanks for any help!
Begovaya said:
I will post other questions later within this thread, in order to keep this forum clean. Thanks for any help!
Click to expand...
Click to collapse
You should ask Microsoft . For me the system is good enough, but maybe you are searching for an alternative to Outlook. There are several applications doing just this, maybe you will find a better one. I think the term for such applications is "PIM".
johnpatcher said:
You should ask Microsoft . For me the system is good enough,
Click to expand...
Click to collapse
So you're saying you don't have problems with single mobile number?
johnpatcher said:
but maybe you are searching for an alternative to Outlook. There are several applications doing just this, maybe you will find a better one. I think the term for such applications is "PIM".
Click to expand...
Click to collapse
Yes, I guess that is what I need. Would you please give more clues about the PIM? I googled "PIM Windows Mobile 6", and got many... too many results. Please enlighten me on this. Thanks
you can use bluetooth to send contacts directly from p1i to max i believe, that would be better and faster solution
Inesoft phone
xiux said:
you can use bluetooth to send contacts directly from p1i to max i believe, that would be better and faster solution
Click to expand...
Click to collapse
Thank you. I tried this... it doesn't help.
For example, I have one contact who has about ten numbers, among them 4 mobile phone #. After beaming to Max, only one mobile phone# remians. Obvious the idiotic WinMo contacts program decides that it doesn't need the other 3 mobile#.
D--n!!
Has anyone used Inesoft phone program?? Can it solve these problems?
http://www.inesoft.com/eng/index.php
I have an interesting problem with ATPlugininstaller.
I installed chome editor v1.6 on my wm6.5 device.
At first it was working fine, and I created 2 plugins using it.
THEN, I decided to add the "day of the week" to the clock panel, by placing code directly in the titanium.cpr files.
Well, the weekday was added successfully, BUT now, I CAN'T use chome editor to create new panels, and I CAN'T install any plugin that uses the ATinstaller.
Whenever I try to do either, I get:
"An unexpected error occurred in ATplugininstaller
ATplugininstaller.exe unauthorized access exception
At System.IO._Error.WinIO error()
At System.IO.FileStream..ctor
At System.IO.FileStream..ctor
At System.Xml.XmlTextWriter..ctor
At System.Xml.XmlDOMTextWriter..ctor
At System.Xml.Xmldocument.save
At ATPlugininstaller.Main.AddLayout to cpr()
At ATPlugininstaller.Main.Main ()
As I said
, I get this same message when I try to create a new panel or add any cabs that require the plugin.
However, the panels I already created and the plugins I already installed still work fine.
My question is, why? My manually adding the code into the cpr files to show "day of the week" on the cclock panel is no different than the entries the installer makes when I install a plugin, or create one using Chome editor.
I know, I've looked thru the cpr file content. So, why does the installer crash AFTER I add the code for "day of the week" to the cpr files?
Can someone please help? Thanks.
Moved, nothing to do with development.
Ok then where do I put it? The ATplugininstaller thread IS in this developmen section, so I beg to differ with you.
I put it out here after getting no response to my inquiry in that thread.
This is one responsive board, out of 10 or so inquiries I've posted, I've only received 2 responses, all from from the author of one sw.
This is a real HELPFUL board,, I've got to say.
And, my inquiry, to remind you, HAS to do with development because I'm creating panels in Titanium using xml.
If the particular sw in question is in this section, then my inquiry as to why it crashes deserves to be here.
I guess it doesn't matter, the members on this board are of no help whatsoever. It's a waste of time to even post.
If I sound frustrated, it's because I am. I have no desire to get flamed, but I need help, and no one even answers.
No need to get frustrated .
Your thread does not belong to the development and hacking forum, that foum is please read the rules of D&H here.
Someone can only help you if they know the solution to your problem, no need to blame the users or the forum itself. Posting in the wrong section will not be helpful to you and will add to our work.
And if you really think posting here is a waste of time, why bother posting ?.
I have moved your thread to Q&A forum, which is regularly visited by developers and people with great knowledge in this field, patience is the key; not blaming the users of the board or being sarcastic.
As far as development goes, you are welcome to post your work ( pannels for titanium ) when they are ready, but not questions.
Hope you calm down, and not repeat such bursts of frustration. You could consider this a warnning.
Please read this carefully:
2.3 Flaming: XDA was founded as a group of people sharing information about certain mobile phones. Sharing does not involve virtual yelling (flaming) it does involve working together to solve problems in an environment of mutual respect and understanding. Losing your temper and flaming another member, or group of members, is not acceptable behavior.
Click to expand...
Click to collapse
I do understand your need for help, but calm down and have patience, try searching or contacting XML writers/developers.
Hope you co-operate.
Understood. I had to do some venting because of all the nonresponses. Can you at least tell me where you moved my post, or did you just delete it? Thank you.
Thank you for your co-operation.
It has been moved to question and answers senction under the general section.
Many people come by here, surely someone will answer; if they have a solution.
madnish30.
just try it with TICS instead of ATPluginInstaller
(link in my signature)
there you don't need a hardcoded .plg and you have the possibility for pre-/postinstall scripts.
Also more definite error message, if you get in trouble.