Dual booting Witstech tablet supports Android 2.1 and Windows CE - General Topics

The Witstech tablet allows you to run both Android 2.1 and Windows CE. The A81-E is based on last years A81 sporting a 600MHz ARM Cortex-A8 and a seven-inch 800×480 touchscreen.
Read more here:
http://ongoingissues.wordpress.com/2010/07/03/dual-booting-witstech-tablet-supports-android-2-1-and-windows-ce/

think i'm hooked.
just ran into this and i think i'm hooked.
Something like this is the missing link in my arsenal.
Has anyone purchased tested? What do you think?

Hi there,this looks interesting anyone using this device? would like to hear
a hand on report
btw where can we buy this device and price??

ive been researching this tablet for a few hours now and from what i can tell theres no market app...which wouldnt be so bad because you could download all the apks to your sd card, but theres also no file explorer which means that plan is moot. everything though, is a dream!

I purchased one of these little beauties with 2.1 on it. When running 2.1, the bluetooth, audio and gps are broke. Audio works but is very quiet, bluetooth and gps simply do not work. I used adb to install apps, most fc'd after install. There is a new ROM out for it that fixed most of the fc's, but did not fix bt or gps. When I contacted support, I was told that if i wanted to use gps I should install wince...
Otherwise, the device is very sexy, very fast and feels to be quite durable. If they can get the 3 issues listed above worked out, this thing will be awesome.

Well? Where is the update. Have you made any progress with the wisitech? Access to marketplace at this point?
Thanks for keeping us updated!
Sent from my MSM using XDA App

Newest firmware fixed low sound,no gps,and has market. Also has Flash with froyo.
http://www.merimobiles.com/Witstech_A81E_Android_2_2_Flash_10_1_App_Market_p/meri0306.htm

It looks like this wisitech has a lot of support? Is it performing up to expectations since the last few firmware updates?
Sent from my MSM using XDA App

ViewSonic is releasing a 10.1-inch tablet that will dual boot Windows 7 and Android 1.6.
http://technolog.msnbc.msn.com/_new...nics-10-inch-tablet-boots-windows-and-android
My question is, why ONLY Android 1.6??? Android 2.x has been out for months and they can't have it integrated into this device? Bad decision in my opinion. Although the article does say ViewSonic has another tablet that has Android 2.2, it isn't one that dual boots. Just thought I'd share.

Witstec A81G
I just ordered the A81G (supposedly everything is working), with 2.2.
I ordered it because (in theory) it dual boots into WinCe and 2.2, GPS working in both operating systems, removable battery (most do not and most do not have very long battery life, makes the product virtually useless, as a mobile device) once the battery is dead) and a matte screen.
If all the above is true then it is one heck of a deal at $205, shipped (ordered it from Hotmid). It is it not then it will make a great paper weight.
The videos of the product on YouTube seemed very promising.
Once I get it (I was too cheap to pay for quicker shipping), around Jan 151011, I will post my review and indicate whether I accomplished the dual boot.
I even saw a video on line showing it with Multi-touch. Hmmm.

Problem with Market solved
This is the solution.
Android market setting
1) Press Home button
2) Click settings
3) Chose Applications / Manage applications
4) click Running TAB
5) Find Market program in the list and click
6) Click :
a. Clear cache
b. Force stop
7) Press back button On 81
8) Find Google Services Framework and click (Running TAB)
9) Click
a. Clear data (DELTE warning will appear. Click OK)
b. Force stop
10) Go back to Home page of A81
11) Try to Run Market
12) You should see new window with following message: An error occurred. Please try
again. (this is good message telling that all steps was done successfully)
13) Turn OFF device
14) Turn ON device
15) Make sure you have Internet connection (WiFi or other) and SD card is inserted
16) Run Market
Now its working fine.

Related

Very low cost tablet

Hi all, i'd like to buy a chinese android based tablet (price should be around 100€), i'd like to ask you which one do you suggest to buy.
I've seen one from my friend and i liked it, i didn't remember the model but i tought that the android market was not the official one, can it be? If so, there's any way i can install it? Or i can install other apps without the market?
Another question, are these upgradable? I thought that the Android inside the tablet was pretty old (1.6 maybe), this was not a problem in everyday use, but i'm a maniac and i like to have everything up to date, if i can.
Please let me know
Just bought the TechPad Android Tablet
I guess we'll see what can be done with these. I don't need an ereader so I am looking for this to be an extension of my android phone, GPS - browser - etc. I should receive it by the 9-25-10
It has OS 1.6 Android 7 Inch Tablet with a 800MHz processor, 256 MB of RAM, 1Gb ROM, WiFi, and the Google Android Marketplace.
superchaos said:
I guess we'll see what can be done with these. I don't need an ereader so I am looking for this to be an extension of my android phone, GPS - browser - etc. I should receive it by the 9-25-10
It has OS 1.6 Android 7 Inch Tablet with a 800MHz processor, 256 MB of RAM, 1Gb ROM, WiFi, and the Google Android Marketplace.
Click to expand...
Click to collapse
Look at this: http://www.slatedroid.com/
There are many store where you can buy that table you can do your own research on the web so you can select the right store that will meet your budget.
@superchaos
so did you get the 7 inch techpad unit yet? if so how is it?
I did.
It is not replacing my phone, I seem to be able to see a lot of the apps in the market but I am unable to download them. It just gets stuck at the starting download screen. Wifi connects really well and has a great connection.
Some apps just won't install like google earth, Google sky map, Swype doesn't recognize the device, etc.
The touch screen is kind of weak and you really have to press to get it to get the typing to work. The system files are accessible and there is a "su" folder. I am not real good at getting into anything. It looks to me like it is rooted but I have not figured out how to get into a recovery mode.
I have tried to connect it to the SDK from google and it does not recognize the device. If anyone has any ideas, I am open to suggestions.
Market issue is likely just Google servers. Happens all the time.
You need to test root by running an app like titanium backup which needs root, and see if it works.
For recovery, you would only get a stock one, and I doubt you will get a custom one online if the device is not common.
Is USB debugging enabled for adb, and have you looked for it in device manager to see its hardware id and check if the id is listed in the adb driver list?
@superchaos
judging from the price the screen probably is not capacitive type but resistive. how's the battery holding? how long does it last before you have to recharge? does it look like it's upgradable to android 2.2?
thanks.
pulser_g2 said:
Market issue is likely just Google servers. Happens all the time.
You need to test root by running an app like titanium backup which needs root, and see if it works.
For recovery, you would only get a stock one, and I doubt you will get a custom one online if the device is not common.
Is USB debugging enabled for adb, and have you looked for it in device manager to see its hardware id and check if the id is listed in the adb driver list?
Click to expand...
Click to collapse
It doesn't seem to be rooted. To get the adb shell to recognize the device and to get Dalvik Debug Monitor to see the device, I followed the instructions here rbgrn.net/content/399-how-to-get-archos-5-internet-tablet-adb-working-on-x64-windows
I used HiDROID instead of Archos5 and the device id is USB\VID_18D1&PID_0002&MI_01
I run winXP not win7 and this worked. Screen capture works too. The programs I installed that require root just force close.
tlusg said:
judging from the price the screen probably is not capacitive type but resistive. how's the battery holding? how long does it last before you have to recharge? does it look like it's upgradable to android 2.2?
thanks.
Click to expand...
Click to collapse
The screen could be a lot better. It is like there is a film on top of the screen for touch capabilities. The battery holds really well unless you are watching videos. 4-5 hours of constant use. You can leave it plugged in too. I am hoping it is upgradeable. The OS is built for a phone.
How do I get a list of hardware devices in the phone? Not just the specs on the pamphlet but actual hardware names/mfg's?

Velocity Micro Cruz Tablet

Anyone else has this device yet? I have been hacking this but no Marketplace. Any takers?
Me
Already installed some market apps from my g1 onto it
i got it as a present for a cousin but having a issue trying to get smart keyboard to be installed from a backed up apk is it just not compatible? i wish there was a way to root this thing =(
Jonalaniz said:
Me
Already installed some market apps from my g1 onto it
Click to expand...
Click to collapse
Hi....I installed some apps from my G1 also. But the ones that depend on the market for update or rely on web interaction either won't install, force close or don't work quite right.
Man I sure hope that someone might tackle rooting this device soon. I think it has so much potential for being a useful device.
Rooting the Cruz Micro
Via tether its already rooted. Just adb shelled in and su works fine. So no rooting necessary as I understand it. However I am not a firmware guy so just my experience.
I did notice when I used Cruz Marketplace I got the option for Android Marketplace which has thousands of apps - not sure its Google's but worked well. One item to note is that the CPU in these is not an ARM but MIP's. It hasn't been a problem for me (if I am desperate I will just use a cross compiler to build something) but I have heard it caused issues on other forums for people.
V.
Processor Information/Docs
I was in with ADB playing and got this from cat'ing procinfo.
system type : JZ4760
Hardware : PT701
processor : 0
cpu model : Ingenic Xburst V4.15 FPU V0.0
BogoMIPS : 527.56
wait instruction : yes
microsecond timers : no
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : yes, count: 1, address/irw mask: [0x0fff]
ASEs implemented : mxu
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available
Googling Igenic will find their site for you. Notice the XBurst in the name. They have a lot of PDF's and information on their FTP site which the website links too. Unfortunately they have great detailed PDF's on the JZ4755 but nothing on the JZ4760. Had me wondering if they took a previous design and just customized a bit for the client.
I do realize of course that a LOT can change in even a small revision of a chip. Anyway - for the 4755 they have cross build tools, linux demos, board designs, nand and usbboot instructions etc.. Even the tool chains to build for the mip's.
Man this is the best XMas present my wife has got me in years
Is there a hack to install Android Market on this Cruz Tablet? Thanks.
Android App Store App
The Cruz Marketplace (cruzmarket_com/mkt/mhome.asp) currently has a app listed 5th from the top as I am viewing it now called:
AndAppStore - Android Market Place App
FREE
This is how I installed mine, and it works like a charm.
V.
(sorry for incomplete URL but am noob and can't post URL's)
I would love to find out if there is a way to port any of the existing ROMs to this device. The touchscreen is not responsive enough with the current firmware, but the keyboard is- that tells me there is the ability to increase responsiveness... other than that, the ability to run auto task killers would help because it looks like most apps stay resident and slow the device down considerably. Two problems that can be fixed by tweaking the firmware I believe- any developers out there with the desire to take this on?
You may want to check what's going on at slatedorid's forum. Google slate droid velocity cruz... cannot post the link
I have one as well.
I really like the device even though other tablets are offering better features in low-end tablets. I checked Best Buy today and it was $169. I got it for $199 last week before CES. I have the 7 inch T10(x) series. The capacitive display is ok for me, its like getting to know a new friend. Lack of security, Android Market, and built in obsolescence of the OS are bummers.
Worst - a smart device that keeps all your stuff but doesn't even have simple password/PIN protection. Doh!
Sorry to burst your bubble, but that app does NOT give you access to the true Android Marketplace. The Android Marketplace is a Google hosted site, and it has thousands of apps. The Android App Store has less than 2k apps, definitely missing some big important ones, like the Pandora app for Android.
There ARE hacks to get the Android Market for the Reader, but so far I've not found a hack for the Tablet (and yes, there IS a difference).
Good luck to the OP. If anyone comes across a hack for the Tablet, I would love to know.
valenfor said:
The Cruz Marketplace (cruzmarket_com/mkt/mhome.asp) currently has a app listed 5th from the top as I am viewing it now called:
AndAppStore - Android Market Place App
FREE
This is how I installed mine, and it works like a charm.
Click to expand...
Click to collapse
dsnyder586 said:
I would love to find out if there is a way to port any of the existing ROMs to this device. The touchscreen is not responsive enough with the current firmware, but the keyboard is- that tells me there is the ability to increase responsiveness... other than that, the ability to run auto task killers would help because it looks like most apps stay resident and slow the device down considerably. Two problems that can be fixed by tweaking the firmware I believe- any developers out there with the desire to take this on?
Click to expand...
Click to collapse
Still no progress on this to date. Alot of discussion taking place on the SlateDroid forums with a new area dedicated to the Velocity Cruz Tablet.
pandora works on the cruz tablet, by way of sd card. i also have a maylong m-150 i used the pandora apk from my sd card to upload it. works fine
Specs on Velocity Cruz Tablet Processor
As mentioned above in this thread, the processor is an Ingenic JZ4760 processor. Here are the specs on the processor from the Ingenic site:
CPU XBurst, 600MHz
VPU 720P Decoder
GPU 2D Graphics, Alpha Blending, Up to 100M Pix / S and 1080P
Mem-IF 8/16-bit SRAM, Nor Flash
SLC / MLC / TLC NAND Flash, support 4/8/12/24 bit ECC check
16/32-bit DDR2/DDR/Mobile DDR SDRAM
Peripherals AC97/I2S/SPDIF, Audio Code, LCD-IF, TV Encoder, EPD IF, Camera IF, I2C, SPI, UART, SDIO, SIM IF, SADC, TS-IF
Package BGA345, 14mm x 14mm x 1.1mm, 0.65mm pitch
Process 0.13um CMOS
I posted a full spec sheet with a link to the Ingenic data sheet pdf in my Slatedroid post:
http://www.slatedroid.com/index.php?topic=15402.0
Hope it helps with your development on the device.
ugh
I got the T408, i have tried twice to install market and failed both times. I am one-click-rooted as it has the 2.3 Gingerbread... easy enough... now i just cant get half the apps i want from Amazon, or Applanet.
Google Market on Cruz Velocity T410
OK so my son got the T410 for christmas, I've got it rooted and am working on a push for the google market and frameworks. Should have it pretty soon. I'll post it as soon as I do.
UPDATE:
I will go through this quickly as it was actually pretty easy. This is how I did it, I had no problems so I would not anticipate any, however standard disclaimer, I can't be held responsible for anything you do to your device, I am simply sharing my experience. What you choose to do is up to you. I didi this on the T410, but I would expect it to work the same on the T408
1. Rooted with gingerbreak and installed superuser and busybox over it (search for it)
2. Placed the app folder (found inside the gapps.zip attached to this post) on my internal sd card.
3. Installed the apps in this order:
I DID NOT OPEN ANY OF THESE APPS AFTER INSTALLATION, ONLY CHOOSE DONE AND MOVE ON TO THE NEXT ONE.
onetimeinitializer.apk
setup.apk
googleservicesframework.apk
gmail.apk
maps.apk
talk.apk
vending.apk
AFTER THE LAST ONE IS INSTALLED, I REBOOTED MY TABLET.
Upon reboot I let the tablet fully cycle the sd card checks and all that, once I swiped to unlock the home screen, I was met with a decision asking whether to use Launcher, of Setup Wizard to complete the action.
CHECK THE BOX TO USE ACTION AS DEFAULT AND CHOOSE LAUNCHER
4. I then opened the google market, signed in with my gmail account and once it had synced my device with the google servers (yes WIFI must be on and connected, I had to say it because you just never know) I had access to the market.
I have downloaded a few apps and have had no problems, it is an older version of the market and I don't have market updater installed, but I may try that later.
I have also noticed when looking in the account and sync area, it will sync my gmail, but not my contacts or calender, I will have to look at that later as well.
Hope this helps
cjggilbert said:
OK so my son got the T410 for christmas, I've got it rooted and am working on a push for the google market and frameworks. Should have it pretty soon. I'll post it as soon as I do.
UPDATE:
I will go through this quickly as it was actually pretty easy. This is how I did it, I had no problems so I would not anticipate any, however standard disclaimer, I can't be held responsible for anything you do to your device, I am simply sharing my experience. What you choose to do is up to you. I didi this on the T410, but I would expect it to work the same on the T408
1. Rooted with gingerbreak and installed superuser and busybox over it (search for it)
2. Placed the app folder (found inside the gapps.zip attached to this post) on my internal sd card.
3. Installed the apps in this order:
I DID NOT OPEN ANY OF THESE APPS AFTER INSTALLATION, ONLY CHOOSE DONE AND MOVE ON TO THE NEXT ONE.
onetimeinitializer.apk
setup.apk
googleservicesframework.apk
gmail.apk
maps.apk
talk.apk
vending.apk
AFTER THE LAST ONE IS INSTALLED, I REBOOTED MY TABLET.
Upon reboot I let the tablet fully cycle the sd card checks and all that, once I swiped to unlock the home screen, I was met with a decision asking whether to use Launcher, of Setup Wizard to complete the action.
CHECK THE BOX TO USE ACTION AS DEFAULT AND CHOOSE LAUNCHER
4. I then opened the google market, signed in with my gmail account and once it had synced my device with the google servers (yes WIFI must be on and connected, I had to say it because you just never know) I had access to the market.
I have downloaded a few apps and have had no problems, it is an older version of the market and I don't have market updater installed, but I may try that later.
I have also noticed when looking in the account and sync area, it will sync my gmail, but not my contacts or calender, I will have to look at that later as well.
Hope this helps
Click to expand...
Click to collapse
Was Able to root my wife's T408 as well with gingerbreak and have market 3.3.4 running on it now.
First I installed apps in the order you did had done. The version of Market is dated for sure but I was able to update to 2.2.6 via the stock OI File Explorer. Anything later then that seemed to crash. I then used SU & File Explorer to r/w the /system/apps/ folder , moved the newer 3.3.4 Market APK there and installed from that location along with a system reboot. Once rebooted the new market showed up right away. Only issue is some apps list as not compatible with device but having my wife use her Sidekick 4g to download and back up the app and email it to her tablet Netflix , Firefox , and many others ran with no issue even with Market saying not compatible.
bubbafett4hire said:
Was Able to root my wife's T408 as well with gingerbreak and have market 3.3.4 running on it now.
First I installed apps in the order you did had done. The version of Market is dated for sure but I was able to update to 2.2.6 via the stock OI File Explorer. Anything later then that seemed to crash. I then used SU & File Explorer to r/w the /system/apps/ folder , moved the newer 3.3.4 Market APK there and installed from that location along with a system reboot. Once rebooted the new market showed up right away. Only issue is some apps list as not compatible with device but having my wife use her Sidekick 4g to download and back up the app and email it to her tablet Netflix , Firefox , and many others ran with no issue even with Market saying not compatible.
Click to expand...
Click to collapse
I have noticed that as well. Seems like since the Market added the ability for apps to be device specific that alot of apps don't show up for devices that aren't supported. I am playing a little with the build.prop file and when I get it correct I will let you know. Even root explorer would not show up in the market, but I purchased it from amazon and Im using it to drop apps into place.
Android Market - I used the JGM ROM, rooted with z4root, and had blank Market. Accessing market via laptop showed my Cruz listed, but no serial number. Gave up, but then by luck a week later, I went to the Market on my laptop, found an App and selected my Cruz as the device to download it to. 2 hours later, sure enough the Market was working, and that select app downloaded.
It almost seems like you have to prime the market first for the Cruz via a computer...

[Q] POV Mobii 7 Gen2

Hi all,
I bought a Point of View (POV) Mobii7 Gen2 some days ago and it appears to work really well, especially for its price (129 euros). Everything works quite smooth and games run quite well. However, there is no update to Android 2.2/2.3 and the credential storage appears to be unavailable (no such menu item?!), which means I can not connect to the WiFi of my university network. Does anybody know:
(a) if there is a similar device so I can use the firmware of that one?
(b) how I can enable or install the credential storage in Android so I can connect to PEAP networks? Think this is a major flaw in the firmware!
Thanks!!
Hi,
Did you found a solution, i have the same question and i am looking for a custom rom for this device.
Regards Rees1267
Nope, not yet...
Ok, maybe later ....?
By the way, i'm using a alternative market, called Applanet and this market wil download very wel and the apps installed fine...
Google it and install it from youre sd card...
When you know a custom rom for this device, please tell me.
Rees
I have the same tablet as you guys i think, i was wondering, is there a way to get the Android Market on these tablets?
I did struggle quite a lot to install the market, but so far no luck. I actually DO have the market installed, but all downloads fail due to missing components. The trick is to install the vending.apk (i'm at work atm so can't post it), but it will not download, I think it is caused by the Google Framework which is missing. What DOES work is the Applanet market. Also copying APK's from a rooted phone does work if you need a certain app which isn't on the AndroidPIT and Applanet market.
One other thing: next week new firmware will be released for this device improving performance and fixing bugs. I hope this firmware does include the google framework, enabling market installation.
Please also post your experience and achievements on installing the market and other improvements/interesting things. Starting to like the device though: watching videos, playing MP3s and e-reading works well. Replacement of the launcher is recommended, I prefer Launcher Pro
mobii gen2 and youtube
I get it before few days, i still not able to have youtube on.
Did someone have made it? And if is from what market is dowloadable?
Thanks
You can install the Youtube app, its working on mine Mobii V2....
I heard from pov, they have a release update this week!!!
Rees
Youtube works great on the Mobii 7
New firmware is out
http://downloads.pointofview-online.com/Drivers/7 inch Gen II Tablet PC Firmware V1.3.10 upgrade/
making custom ROM for (other) RK2818 tablet is started:
http://www.slatedroid.com/index.php?board=163.0
http://forum.archosfans.com/viewtopic.php?f=59&t=45520
you can make custom ROM for your tablet yourself too.
new update
I tried new official upgrade last night and all is running fine, i think litlebit faster. And now its inside new android market. I was hoping that will be a new version of android 2.2 but its still 2.1.
Is the Market the official Google Market?
Is the trackball still working? Someone in Holland reported that the trackball didn't work after the firmware upgrade.
Pov just posted a new link for trackball users!
I did the trackball version upgrade. You must download also the other file. The trackball zip doesn't include the upgradetool! There are no extra apps nor Google
The market is still androidpit
I am disapointed with new update. My mobii have not trackball, inside is home, option And back button. after upgrade now they always on with green led in suspend mode. Batery fast running out. Sometimes its not possible to switch on And only reset help. I search way to make downgrade.
gogs1976 said:
I am disapointed with new update. My mobii have not trackball, inside is home, option And back button. after upgrade now they always on with green led in suspend mode. Batery fast running out. Sometimes its not possible to switch on And only reset help. I search way to make downgrade.
Click to expand...
Click to collapse
same here, exept vor battery life. listening to web radio, surfing and a little e-book reading gives me at least 5h... haven#t drained it to limit though.
how long does the battery last on your mobii?
btw: i have the nontrackball tab
Guys, I'm happy today!! I managed to get the Android Market working on the Mobii 7. Here is what I did:
- Download the image file from http://www.slatedroid.com/index.php?topic=14498.0
- Update your Mobii 7 Gen2 with this image, choose NOT to update the boot image.
- Start the Market, enter your settings.
- Do a test download (even if it fails).
- Follow these instructions: http://www.technipages.com/android-market-download-unsuccessful-error-fix.html
- Install the new market APK from http://www.megaupload.com/?d=TON34WSX
- Do not be tempted to test the Market now;
- Reboot your device
- Market is working!
muke65 said:
same here, exept vor battery life. listening to web radio, surfing and a little e-book reading gives me at least 5h... haven#t drained it to limit though.
how long does the battery last on your mobii?
btw: i have the nontrackball tab
Click to expand...
Click to collapse
i let it on stand by an battery goes out for 5-6h.
bazz0847 said:
Guys, I'm happy today!! I managed to get the Android Market working on the Mobii 7. Here is what I did:
....
....
....
....
- Market is working!
Click to expand...
Click to collapse
didn't work here :-(
market works but can't download and the browser force closes...
Wait! Now it works..... after the 4th time I've booted the pad. What ever.....
HAPPY NOW!

Viewsonic VPAD 10 and Market

Hi all,
I have just got my Viewsonic VPAD 10 and was a bit sad when I saw that market wasn't on.
So anyone fixed market on a VPAD 10? Can it be done in the same way as in the G-Tablets?
/M
Is that the one that dual boots windows and android 1.6?
According to the Viewsonic products page it is... 1.66GHz Atom, dual boots Windows 7 & Android 1.6...
be interesting to hear batt runtime and quadrant score...
As to market, I suppose that you could use adb push to get the market app on there and then try the market "fix" in the dev forum... worth a shot anyways...
(It's the one that Sears initially mis-labelled the gTab as...)
As we tried it for a couple of days now it seems like it runs for aprox 5-6 hours on WiFi
Haven't tried with the 3g yet but it will come
Is it the "Full market (improved market fix) on G Tablet", "The Viewsonic G Tablet Super Thread (w/Market, Gmail, and Maps!)" or which thread do you mean
/M
I'd try starting out with low expectations, and go with "The Viewsonic G Tablet Super Thread (w/Market, Gmail, and Maps!)"...
what it essentially entails is getting market installed, running it(setup), try to download(IIRC), the back to home...
at that point you can try the Titanium Backup method(never worked properly for me as I had to do what follows) or
1. go into setting and find the section that lists running apps
2. find market, clear data/cache, force close(quit) it
3. find Google Services Framework, clear data/cache, force close it
4. run market
5. get error -> reboot
6. no error, back through 1-5 again
When it reboots IF it works, you should see more apps in market, but you're not going to see all of them as the VPAD 10 is running a fairly old version of Android as it's the last one to support x86 completely...
Now IF ALL of that works and gets you market, you COULD try to do the extended market "fix" to see if it lets you see any additional apps...
(I picked up the above steps by researching the thread from which the "fix" originated for a different device and version of Android(2.0 IIRC), and figured where it fit into the TapnTapped version of 2.2 on the gTab... )
Also you need to be aware that the VAST majority of Android devices are ARM based, and if an app uses "native" code, it's just not going to work on that VPAD since it's x86... it's the downside of that particular tablet for Android, but OTOH you can just run Windows and likely have an easier time getting a linux distro on it eventually...
[EDIT]
Caveat: this method may not even work for 1.6, and some of the apps/services listed may have different names in listings under 1.6, so you MAY end up having to look on another forum for how other 1.6 devices gained market access... e.g. MANY of the Via WM8505 based tablets ran 1.6, e.g. aPad (IIRC) thei rmethod fo rmarket access may work if the above doesn't or has enough differencces...
[/EDIT]
Has anyone figured out how to do it yet? I spend most of my time in windows 7 now cause the android build feels so crippled.
RiffyDivine said:
Has anyone figured out how to do it yet? I spend most of my time in windows 7 now cause the android build feels so crippled.
Click to expand...
Click to collapse
Have you tried the new online market? Also, there is info in these threads about a version of 2.2 for the Viewpad:
http://forum.xda-developers.com/showthread.php?t=909062&page=2
http://forum.xda-developers.com/showthread.php?p=10982062
Blackbird1100 said:
Have you tried the new online market? Also, there is info in these threads about a version of 2.2 for the Viewpad:
http://forum.xda-developers.com/showthread.php?t=909062&page=2
http://forum.xda-developers.com/showthread.php?p=10982062
Click to expand...
Click to collapse
Thank you very much my good sir, I now have a direction to follow. I hope this also leads to a working market place.
RiffyDivine said:
Thank you very much my good sir, I now have a direction to follow. I hope this also leads to a working market place.
Click to expand...
Click to collapse
Please let us know how Froyo runs on the ViewPad 10.

GooApple V5 issues list

Hello everyone!
First of all sorry for my bad English. I represent smartphones distributor from Kiev, Ukraine. We have contacted with GooApple sales director and have got GooApple V5 sample phone for tests before bulk orders.
All I can say: it's just not ready for international market at the moment and unfortunately they are not very much interested in positive firmware or hardware changes.
They have made firmware ios_11.12.08 for our last recall but non of our issues have been resolved + one added: it doesn't react on first home button push after lock screen, it only shows unlock screen after the second home button push or fast twice push.
Here is our issues list:
Phone's battery draining, runs out too fast!!! After full charge it runs out 75% battery life for 4 hours of usage: 1 call during 5 min., video watch during 8 min., music during 6 min, looking thought photos during 5 min., taking 3 pictures with the camera. 1,5 hour is just for walkthrough over the interface, settings, lock/unlock. 3,5 min. video takes about 5-6% of battery life. And it's without any gaming, internet surfing, making videos. Other time it's just holding.
Screen has some lightness flickering. Backlight blinking, flashing a little bit from the sides and left top corner.
Connect button (in putting Wi-Fi password mode) doesn't work. Just can't connect to any locked Wi-Fi network.
Bad Wi-Fi catch signal even with a close to phone router.
Doesn't remember icons location on springboard bar after moving around and reboot the phone.
Showing the last called phone number in background when sending USSD commands (checking balance or any anything else).
The input keyboard should be the same as iOS with working English and Russian (now it doesn't work) and customization ability in the General folder in Settings.
Booting animation should be the same as iOS with Apple logo only.
Creating folders (put in and put out icons) and moving icons around doesn't work properly.
The font in Calendar, Time, Dial is not the same as iOS.
The sim card pin code enter should be the same as iOS.
How to delete apps like Call Log, PowerOff... chinese QQ and others?
Reminders, Maps, Weather Stocks iReader apps should be in English.
Browser app should be renamed to Safari.
Gallery app should be renamed to Photos.
Phone key at dialpad should be renamed to Keypad.
Must speed up fake iOS usage response, performance.
Must speed up screen rotation/orientation response.
Must replace red ! (exclamation) to the Sending progress bar when sending messages/SMS.
Must replace chinese word to english word Call at the dial pad.
Make possibility of adding your own ringtones in the Settings.
Make double tap or pres hold the home button for multitask, running apps view like on iOS with appear at the bottom of the screen.
Make possibility of completely close/kill apps taking up memory and running in the background.
Make dialing numbers sound quieter (it's set to max by default).
Make lock/unlock sound quieter (it's set to max by default but should be possible to customize).
Make full-screen camera mode when taking photos.
Correct + - add sound mode when playing video, music (quiet sound from 2 to 6 bars and after 6 bars it's big increase in sound).
Remake Videos app (it should redirect/open phone's gallery instead of SDcard content).
Remake YouTube app (it should be in English or redirect/open youtube.com).
WLAN folder in Settings should be renamed to Wi-Fi.
Phone warms up when gaming, talking, videos.
It doesn't recognize sim card enter when ON.
Word Wednesday comes out of the Calendar app icon.
Power On/Off button dangles, swing around with sound.
Upper background part can be seen when charging.
While start pinching any picture from the center it zooms in with imprecision to the side of the picture.
Battery life doesn't shows properly on lock screen (it shows all empty when screen corner shows less of 20% battery life).
It Reboots by itself few times during the day when locking the screen.
If you know any other issues please add them by numbers 39, 40....
Or if you have solutions for any of the issues please also add it by the 1-38 numbers.
I hope we can make it better together!
Possible Solutions to Gooapple V5 issues.
Generally speaking, I don't think that all these reasons are real for every V5 phone around. Did you wipe out every data BEFORE flashing the new rom? If not, certain applications may have been running multiple times (i.e.: Maps in my case when I did that). I am using the android rom (not the iOS one) and I have not all these problems whatsoever.
Possible solutions:
1. Try and see if you have data enabled or GPS is on. This device has a hardcoded (R) Roaming on (i.e. you can't turn it off) plus it's not (yet) capable of 3G data. Turn both of them off while not needing them helps A LOT.
2. Not an issue here with newest android build; maybe your screen has issues. I've had some friends with original iPhones having the same flickering as yours. Turned out to be their retina display.
3. Not true. I'm connecting on both my wifi spots at home both Wep and WAP/PSK. Wifi is low powered though and need you to be NEAR the wifi router / spot (see below).
4. True! Just 5 meters away and a mid-wall makes the difference. They really need to boost their receiver.
5.Try reinstalling AFTER you've made a complete wipe data/factory reset. THEN install the rom. This might fix the issue.
6.I'd really like to see a list of USSD commands if you have one available for this phone... (pm me??? )
7.Same for Greek keyboard. I've overcame the problem by installing Greek Input Method from the market.
8.Heh. +1
9.It works for me for both android and iOS roms.
10,11.I agree.
12.You'll have to be 'root' to do so. The only way I've found to do so is the program superoneclick (google it). After rooting the V5, download from market 'Root Uninstaller'. Works perfectly even with the 'protected apps' like the one you mentioned. I know that you don't have 'market' on iOS rom so here's what I did:
I've had a factory reset first, then installed Android rom and THEN the iOS rom. I've also installed a program called 'Go Launcer EX'. This pops up when unlocking the device asking you what launcher you prefer, this way you have the best of both worlds.
13-16: Agree.
17 & 18: The problem is the retina display with the slow (relatively) 650MHz MTK6573 processor. The G3 (previous model) had a smaller screen that the cpu was able to handle. On android rom things are better though...
19 & 20: Agree.
21: On android you can do so by adding your custom ringtones on a folder called /alarms, /ringtones etc on your sd card. Should work for us too (didn't try it yet).
22. Agree.
23. I am using an app from market called: Advanced Task Manager does the trick.
24-31. Agree.
32. I didn't go that far!!! I guess you're right.
33 & 34. Yep.
35 & 36. I haven't got such a problem. Consider the retina screen of yours has a problem / issue?
37&38. Nope. Works alright here.
Finally another issue with no solution:
39. GPS lock. The GPS won't operate properly in EU (Greece) where I live. Takes forever to find satellites and it won't lock to a fix point even if you wait 10 mins. This is what I'm after right now and if I have a proper solution I'll post it here.
Thanks for putting up this thread Cyber_dude. If you need anything I'll be more than glad to help!
Thanks for your reply.
We have talked with GooApple for about a week now and sure I have made all needed such as wipe data before firmware update. That's because you are basically using Android ROM. Customers buying phones like this one because they just want iPhone for less and want everybody else think they got an iPhone. So using Android on any iPhone replica is just not right. It should run fake iOS and should be at least 60% of the original one. This phone costs $300 icnl. shipping at resellers (price of used iPhone 4 on eBay) and I think user interface should be well polished and flawless for that money.
Yes, Maps on last gooapple_ios_11.12.08 works in English now. But after resolving one problem they made two others, like it doesn't react on first home button push after lock screen, it only shows unlock screen after the second home button push or fast twice push.
1. That's not a solution! Sure I have turned everything like wi-fi, gps... off. But customers want it to be fully functional phone, without thinking: "ohh., have I turned my phone's wi-fi and gps off to kepp the battery alive?" It's shouldn't be like that!
They have you used so low capacity 1050mAh battery. (but we think it's even less). The original iPhone's has 1420mAh. And there are even 2200-2430mAh on the market today. They have changed screen, ram, cpu but keep the same battery. It's just stupid. And it's smaller then iPhone's battery so you just can't replace it. It works maximum up to 3 hours in active usage mode without gaming. (with full brightness on, because turning it less on this screen is just sacrilege).
That's they have answered about that: "when making a phone, we have to consider a lot of things, especially the cost, when everything is as great as iphone 4, the price will be too..."
2. Yes, it's old issue, it resolves after reinstall.
3. It's true. It works on you because your wep password is large then 8 characters. It doesn't work with less passwords like mac or iPhone.
5. Yes, new firmware resolved that.
6. I mean USSD commands for checking balance.
But here is a command to enter EngineerMode: *#67876#*
7. Stock keyboard is a crap. I use Smart Keyboard Pro.
8. I can change robot with apple booting animation but can't change gooapple name at the beginning. I think it's logo.img at the rom zip file. I have tried to delete it and make other changes to the rom but can't sign it. It's always shows sign error at the install.
9. It works but it works very-very badly. Then you are trying to move icon to other position it creates a folder with other icon, it's so annoying.
12. I have also made the root with the SuperOneClick. And delete Chinese apps with Root Explorer.
Thanks for Go Launcer EX advise. What else it can help us with?
17 & 18. They used MTK6513 it's cuted MTK6573 without 3G. It's not the best one anyway.
21. Yes, I also want to try to add custom ringtone to media directory folder.
23. Yes, I also use Advanced Task Killer Pro on gooapple_ios_11.11.30 but they have added double tap home button like iPhone to kill running apps on gooapple_ios_11.12.08
35 & 36. These issues are real and haven't resolved on new roms. That's not screen problem, I can make a screenshot if needed.
37. This one is also real. Can also make a screenshot.
38. Haven't seen this issue on gooapple_ios_11.11.30
39. Maybe you should try to test it in EngineerMode Have you tried to use any other GPS third-party application?
I didn't know about this issue because I haven't tried GPS, no need with this battery.
Do you know how to replace chinese word (Call) to english word Call at the dial pad? Because it's immediately catches the eye when using. I have decompiled the Phone.apk with APK Edit program but all image files are normal over where, chinese word is not an image file. I don't know how to change it.
Just lets keep this thread go by adding new issues and how to solutions.
Got my V5 about 2 weeks ago. Been playing with it for a while - tried both the newer roms and currently running the ios version that is made available about 10 days ago. Been working fine for me, except I may gps is very slow (can take up to 10 minutes for it to find me), and the built in FM Transmitter does not work. I also have various chinese apps which I was not able to delete. I will try the latest rom to see what improvemements it has.
Question, how did you root the phone? I downloaded superoneclick, but keep getting hung on the "waiting for device". I have usb debuggin on, and tried it both with "usb connect" on and off (the setting in the phone to establish a usb connection to a PC). Instead of using this "usb connect" feature, do I need to download some type of usb driver for this phone? If so, can you provide details? I've tried various usb drivers for MT6513 but nothing yet works - even tried something called PDANet which installed some type of software oin the phone and said it was connected, but still the superoneclick failed. Any ideas?
Oh, by the way I found a vending.apk that works on the ios rom. See link below
http://www.mediafire.com/?khpvzmzwwaqyxdm
Thanks
I have uploaded the drivers for GooApple V5, here is the link: http://www.mediafire.com/?h6hr1ckrf3sc7cj
How to root your GooApple V5:
Make sure you use Win XP.
Download drivers file from the link above and unzip it.
Phone Settings -> Applications -> Unknown sources, on
Phone Settings -> Applications -> Development -> USB debugging, on
Phone Settings -> Applications -> Development -> to keep awake, on
Phone Settings -> Applications -> Development -> Allow analog location, on
Connect the data cable, turn on USB storage in the phone.
In the Windows Device Manager (http://en.wikipedia.org/wiki/Device_Manager) find your phone, open properties and install or update the drivers from the unzipped folder.
Reboot your computer.
Now download the SuperOneClick from here: http://forum.xda-developers.com/showthread.php?t=803682 If you run XP, install .NET Framework v2.0 or above.
Shut down your antivirus/firewall.
Turn off USB storage in the phone. Make sure you do not mount the sd card.
Run the SuperOneClick BOOT process. If it's not success from the first time try it again.
After that install the Root Explorer to your phone, go system/app, push Mount R/W button and delete any app you want.
Thanks for the vending.apk, here are also some tips for it: http://www.addictivetips.com/mobile/how-to-install-new-android-market-2-2-6-on-your-device/
Cyber_Dude, thanks for the engineering mode code. You've done a nice job on the rooting info. Just for the story: I've done it on W7, 32bit and worked alright too. Newest superoneclick has the ability to forcibly ask for Admin privileges. Drivers have to be installed manually though.
I've found out into the Engineering menu that there's a CPU Frequency test that reports a high of 806MHz. THAT would be awesome to have when needed. Do you have any *working* utility that is able to over clock the MTK6573 CPU of it? I've tried some from the market but with no luck whatsoever.
Some info on the WiFi boosting would be helpful too. I've been digging into the /etc directory and found out several conf files that may, or may not do the job. I'd rather not alter the values on my own though...
Ah, finally another addition:
There seems to be an issue importing/exporting my contacts from the phone to google.com. Plus the Account and Sync options on the settings menu isn't reporting the respective field (i.e.: only Picassa, books and gmail is able to sync. Contacts is not on the list).
Thanks.
Cyber_dude - thanks for the rooting details. Got my V5 rooted today, and it worked from my vista laptop (didn't need a xp PC). I deleted the 9 chinese apps no problem including the chinese market app.
The vending.apk I provided works whether you root or not - however now that I'm rooted I will keep your instructions in mind if I want to upgrade to a different market version.
I'm still on the Dec1/2011 ios rom - anyone know what the newer ios rom (Dec10/2011) has to offer? I have tons of apps and settings personalized, so I'm not really wanting to wipe the phone to load the latest ios rom unless I know it will have some improvements.
Only problems I still have, which I would appreciate feedback on, are:
1) gps is very slow to find my location (can take up to 30 minutes). Funy thing is that as I scroll on the map it refreshes fast, and I can find addresses and streets, but it just can not find my location?
2) ther built in FM Transmitter does not work - would love to get this working since I do not have bluetooth stereo in the car. FYI - found other fmtransmiiter.apk apps on the net - can I just replace my existing same app on systems/bin to make it work?
Thanks
Have you tried it with the 'new' Android UI ROM? How does it perform? I'd really like to see some videos - youtube only has 13 and I've seen them all ..
DanADaMan said:
Only problems I still have, which I would appreciate feedback on, are:
1) gps is very slow to find my location (can take up to 30 minutes). Funy thing is that as I scroll on the map it refreshes fast, and I can find addresses and streets, but it just can not find my location?
2) ther built in FM Transmitter does not work - would love to get this working since I do not have bluetooth stereo in the car. FYI - found other fmtransmiiter.apk apps on the net - can I just replace my existing same app on systems/bin to make it work?
Thanks
Click to expand...
Click to collapse
1) Same thing here. From the data sheet (from Mediatek) of the MTK6573 (which this phone has) the update location should be as fast as 10ms (that's 1/100 of a second) so something is DEFINITELY wrong.
2) I think you'll have to 'sign' it somehow. There are some apps that are supposed to provide 'signed' apps but never got to work with one; so I have no experience.
Cheers
macsga, DanADaMan, you are welcome.
I think cpu overclocking is not in time now and it also can make even worse. But we'll be glad if you can find any good, stable working app for that and test it. The only thing need to be overclocked now is the iOS UI, it should have to be polished well to match the original one.
For WiFi boosting, have you tried Wifi Fixer or Wifi Analyzer, you can change your WiFi channels with it.
GPS chipset is very bad. It's just a copy, fake phone, so they have used the cheapest hardware parts for it, we should reconcile to it. Unless they somehow fix it in new firmware, but I don't think it's gonna happen in near future. The main market for this phone is China, so they don't hasten with any international changes. As GooApple sales director said to me: "we sold more then 500pcs aday, should this problem happend to every phone, i think all the phone should return to us". So maybe chinese people are just not as demanding as we are, and they are happy with the phone? Anyway, I think with a good administrative force all listed issues can be resolved in just one week.
By the way, as I know they are planning to produce new phone in January with the 3G support. No info about any other new hardware at the moment.
Meantime we have to add new issues to the list:
39. GPS is very slow to find my location (can take up to 30 minutes).
40. Built in FM Transmitter does not work.
41. Importing/exporting my contacts from the phone to google.com. Plus the Account and Sync options on the settings menu isn't reporting the respective field (i.e.: only Picassa, books and gmail is able to sync. Contacts is not on the list).
42. In last gooapple_ios_11.12.08 firmware it doesn't react on first home button push after lock screen, it only shows unlock screen after the second home button push or fast twice push.
Updates in the last gooapple_ios_11.12.08 firmware:
Increase in task manager.
Blocking state to increase unread text message reminder.
Debug chinese QQ picture upside down.
Some Google applications added (en maps, gmail, voice..)
Task Manager.
Standby SMS prompts.
Double-click the home button shows running/standby apps and kill possibility like in original iOS.
Plus issue 42 added.
I haven't tried all new features in gooapple_ios_11.12.08 I don't want to use it because of the 42 issue. Now I'm using previous gooapple_ios_11.11.30 version. If anyone already installed and running the gooapple_ios_11.12.08 please give us your feedback.
DanADaMan, maybe you should try to make the data backup in stock recovery mode first and install firmware update after that? Maybe this should keep all your apps in and give you the new firmware? (haven't tried by myself)
jontelang, Sure, Android UI works much better with it, but I personally don't want to use it on this phone, it would be too simple and means you gave up making iOS UI ROM better.
As a side note, I've noticed that the phone is able to provide extraordinary 2D & 3D performance. I don't agree with the comment "It's just a copy, fake phone, so they have used the cheapest hardware parts for it, we should reconcile to it." you posted earlier Cyber_Dude, because I've seen cheap devices and this is nothing like it.
I do believe that the dev team has issues supporting the phone chipset due to the novelty that presents at the current time. This processor came out only at the end of June 2011 (fairly new).
News about MTK MT6573 Processor
Monday, June 13, 2011 3:25:26 AM America/Los_Angeles
Since the release MTK MT6516 processor, there is lots of Android phones in the market, which support GSM network and dual SIM card smartphone. But later, when Qualcomm, Broadcom and other smartphone processor manufacturer access into the field, mtk's dimmed. MTK MT6573 is the only hope in the future.
The end of June, 2011, we will share the latest trends with you, with the following new star.
Time: the first smartphone with MT6573 processor has been assembled, the major integrators, solution providers have had contact with, the reaction generally very good, have begun to prepare the relevant program models. As far as know, next month the first smartphone with MT6573 processor will unveiled.
Performance: As MT6573 is positioned in the low-end smartphone, we should not expect performance of deification, but the actual test performance to facilitate more than Qualcomm MSM7227, while MT6573 with the 3D acceleration in the multimedia DSP will give you a surprise. Currently sent to the integrators, solution providers of 3G features are still several prototype debugging.
Programs: MT6573 and MT6516 share same pins, and the both chips can be exchange without any hardware change, this will save cost on design for smartphone manufacturers.
Click to expand...
Click to collapse
Via: http://android-sale.com/blog/news-mtk-mt6573/
macsga, But have you test it side by side with the iPhone 4 (not talking about 4S)?
Sure if comparing with other copies it's a winner. It's the best choice if you want to buy an iPhone replica for the price of the used iPhone 4 and you're not too picky. But it's a huge contrast with the original iPhone 4 UI performance, speed and hardware. And at the present time it's not totally ready for the wide international market due to the all listed issues. That's why I have started this thread, all together we can make it better. Unfortunately GooApple's dev team/engineers do nothing for it, local market and the new phone's version is their main goal at the moment. I know that because I've contacted with the GooApple sales director for the last 3 weeks.
As I have posted before they used MTK6513 it's cut MTK6573 without 3G support. It's good but not the best one. Anyway CPU is not the main problem of GooApple V5. The low capacity battery is much bigger failure. The android-sale.com is just a reseller, they can write anything they want to sell the phones more efficiently.
Hehe, I do have a 4s and (you're right) side by side there's nothing like it. That's why I gave up on iOS UI and turned to the android native one. I do believe that it's a perfect android testbed though. And for 230 Eur (retail price) that the 32Gb model cost me; well I can't really complain.
So; I totally agree! Let's try and make it better
The UI might be faster if you lower the resolution (i.e.: draw @ 480x320 and not the retina native resolution this phone has). It's zoom capabilities should cover the gap and reduce choppiness. Of course, this is just a crazy thought of mine...
macsga, Where have you got it for 230 EURO for 32GB? Official resellers like android-sale.com and rofen.net selling 32GB model for $319.99 (245 EURO) without shipping cost.
How could you lower the resolution? And why? If you want lower resolution you just should buy cheaper GooApple 3G version and it has faster UI response: http://www.youtube.com/watch?v=WqAevweocKs
Cyber_Dude said:
macsga, Where have you got it for 230 EURO for 32GB? Official resellers like android-sale.com and rofen.net selling 32GB model for $319.99 (245 EURO) without shipping cost.
How could you lower the resolution? And why? If you want lower resolution you just should buy cheaper GooApple 3G version and it has faster UI response: http://www.youtube.com/watch?v=WqAevweocKs
Click to expand...
Click to collapse
I got it before the EUR/USD was at 1/1.29 which is what you just calculated . The lower resolution (magnified) would in my opinion give the fast and smooth feeling the 3G has.
As per why I didn't go for the 3G, I did not, because of the retina display the V5 has. The official replacement for a retina display from Apple goes up to 390EUR+pnp, where I got the whole phone for 230 (OK plus 11$ shipping). In the meanwhile I have an android phone to play with (apart from my 4s). Fair deal.
I just wiped the phone and tried to load the ios 12-08-11 rom. Got an error something about not being a signed rom. I reinstalled the ios 12-01-11 ios rom no problem.
Anyone else have problems loading the latest ios rom?
Thanks
is this real?
i have heard that the Gooapple v5 is very good, and it is the same display as the real iphone 4, and can exchange with the iphone 4 display, does this ture?
DanADaMan said:
I just wiped the phone and tried to load the ios 12-08-11 rom. Got an error something about not being a signed rom. I reinstalled the ios 12-01-11 ios rom no problem.
Anyone else have problems loading the latest ios rom?
Thanks
Click to expand...
Click to collapse
There are newer ones from 2011.12.10 on http://rom.gooapple.com use those. Hopefully you won't have the same issues. Correction: Unfortunately the new Android one is not signed- The iOS though works OK
---------- Post added at 05:07 PM ---------- Previous post was at 05:01 PM ----------
lovebargaining said:
is this real?
i have heard that the Gooapple v5 is very good, and it is the same display as the real iphone 4, and can exchange with the iphone 4 display, does this ture?
Click to expand...
Click to collapse
Yes, it's real. You can watch exchanging one another, on youtube here:
http://www.youtube.com/watch?feature=player_embedded&v=s7nUkSdzOqo
The flickering at the corners of the screen is annoying on mine, has this developed from the latest ROM or did you guys see it in previous? I've only had it a few days and updated straight away. I've resorted to the android UI cos the IOS one was sluggish but am more than happy to swap back to help?!
What I did find was GTA III kills this phone. On launch the intro plays but as the game launches the screen goes black and the phone will not respond to any button pressing for an hour, then I think it kills the process and the phone comes back. Just don't try, unless someone can tell me otherwise?
Mine responds on one click of the home button right now but Wireless is pants and so is GPS!
---------- Post added at 09:48 PM ---------- Previous post was at 09:35 PM ----------
How do I tell if I loaded 2011-12-08 or 2011-12-11?
I downloaded them on the 15th and loaded the Android one without any complaints of it being unsigned? Did it over the top of the version it came with though so not fresh install...
EDIT:
Thought it was worth adding how to get into engineers menu:
Dial “*#67876#*”
Is there a way to turn WiFi Tx from 20 to 40 or even more?
I need to root mine still
I never noticed flickering and I have to say that the latest 'iOS' rom is a bit faster on my device resulting in a rather good imitation while the previous was very choppy.
The only drawback is that the UI crashes every now and then. I do like the 'long press' function of the home button that is able to kill apps in the 'official' iOS mode plus I think for the 1st time since I owned this phone that I like more the iOS UI to the android one.
I do have to offer a couple of tips that I found through my xda search:
1. Using a program like Root Explorer (root) you may want to make the following directories as Read Only: /data/tombstones and /data/system/dropbox
This has as a result, that the phone won't be able to log into the main phone memory thus trimming down your available space.
2. *IF* you're using the iOS UI version of the rom you can safely(?) remove the following apps (I state them as bloatware) via Root Uninstaller (root):
-QQ input method and keyboard
-Chinese market
-Chinese Youtube (Yuku)
-Chinese Maps
-Chinese Weather (3 entries, remove all three)
-Chinese iBooks (Google books does the job)
3. Add the following app: Locale Select from the Market and choose your language of choice.
4. If you search the xda site you will be able to find signed Google Apps that (most of them) work with this phone.
Ah, one last thing: I found the best player for playing p0r... erm, Movies, MoboPlayer with the additional ArmV7VFP3 plugin. Supports almost every codec and srt file out there and respective char encodings. Please ignore the message: This program is not compatible with your device. Works like a charm, I swear.
Cheers.

Categories

Resources