I may get flamed for this but I did try and search the WIKI and the Raphael forum. I just purchased an HTC Touch Pro as someone threw me in a pool with my Kaiser still attached to me. I got it through Expansys which I believe is a company in the UK. When I turned it on I saw I was only getting the EDGE network. After doing some research now I see that I may have messed up and I may not be able to connect to the 3G network here in North America. Is this true? Can someone PLEASE confirm this for me? Is there a new ROM I can install or a radio upgrade that will allow this phone to connect to AT&T's service here in the US? PLEASE PLEASE PLEASE let me know. This phone is badass and is a huge improvement on the Kaiser. I'd love to get it to work, but the internet speed is the most important thing to me as I'm a systems engineer and tether with it almost daily for work. I hope someone can give me a definitive answer on whether or not I should send this beauty back. Thanks ahead of time for any input whatsoever!
definitive answer: NO
no 3g in USA on at&t or t-mobile
only way is to wait for the FUZE
htc said its not software its hardware!
sorry i know it sux but if u can return it and wait for the fuze, go ahead!
Aaaaaaaaaaa!!!!!!!!!!
That suuuuuucks! Well, thanks for your quick reply. I guess I'm going to have to see what I can do about returning this thing. Any idea what the ETA on the Fuze is?
Once again, I really appreciate your help. I've been slammed here at work so I haven't had a chance to do the research that I would normally do. I especially appreciate your definitive answer
The Fuze should be released in the next few weeks. The exact date is not known. But by the end of November is almost a guarantee.
Thanks to all!!!
Thanks again. I guess I'll wait for the Fuze. From the pics it looks like they did the same thing as with the Kaiser and removed the front camera for video phone. I guess AT&T is worried about bandwidth issues if everyone starts making video calls. Funny thing is, most people here in North America believe very strongly that we are the most technologically advanced country in the world, yet we can't seem to even compete with other countries, including third world countries like South Africa, on many things including cell phones and reception.
http://forum.xda-developers.com/showthread.php?t=420865
check this thread,complete coverage of the issue...
All post from viper are particulary informative. Still a little bit of hope...
Well AT&T isn't even setup to handle video calls (afaik), so I don't think it's something they're "worried" about.
Awesome labbbby!
Don't know why I couldn't find that thread earlier. It's exactly what I was looking for. I guess I'll wait a liiiiiittle bit. I don't want to part with this thing. Besides, I'm addicted to that damn teeter game.
lokibjensen said:
I may get flamed for this but I did try and search the WIKI and the Raphael forum. I just purchased an HTC Touch Pro as someone threw me in a pool with my Kaiser still attached to me. I got it through Expansys which I believe is a company in the UK. When I turned it on I saw I was only getting the EDGE network. After doing some research now I see that I may have messed up and I may not be able to connect to the 3G network here in North America. Is this true? Can someone PLEASE confirm this for me? Is there a new ROM I can install or a radio upgrade that will allow this phone to connect to AT&T's service here in the US? PLEASE PLEASE PLEASE let me know. This phone is badass and is a huge improvement on the Kaiser. I'd love to get it to work, but the internet speed is the most important thing to me as I'm a systems engineer and tether with it almost daily for work. I hope someone can give me a definitive answer on whether or not I should send this beauty back. Thanks ahead of time for any input whatsoever!
Click to expand...
Click to collapse
So you spend God-knows-how-much on a device without researching it well enough in the first place. Wow.
Well unlocked GSM Touch Pros use 3G on the 2100mhz freq (European) and U.S 3G is on the 850/1900mhz freq (T-mobile chose the 1700mhz route..don't ask why).
Send it back and wait for the U.S version which is branded through ATT as the Fuze.
I should have said, "almost all input is welcome"
LordLugard said:
So you spend God-knows-how-much on a device without researching it well enough in the first place. Wow.
Well unlocked GSM Touch Pros use 3G on the 2100mhz freq (European) and U.S 3G is on the 850/1900mhz freq (T-mobile chose the 1700mhz route..don't ask why).
Send it back and wait for the U.S version which is branded through ATT as the Fuze.
Click to expand...
Click to collapse
I know I said I welcome ANY input. I didn't really expect the sarcasm though. I'm in the middle of moving our offices and being that I'm the IT director it's pretty demanding. I have owned the 8125 (Wizard), the 8525 (Hermes), and the 8925 (Kaiser) before this one. When my Kaiser got ruined I was forced to replace it ASAP because I need instant email/contacts/calendar, tethering, and I use it as my GPS. I figured instead of shelling out $400-$500 for a new Kaiser quickly, I may as well add a couple hundred more and get an upgrade. My mistake I guess. Normally I'm more careful but under these circumstances I didn't have the luxury. I guess thanks for the input anyway. Next time try and be a little nicer to strangers.
Interesting change
While looking at what exactly I had purchased from Expansys I saw that they touted the phone as being, "Quad-band GSM/GPRS/EDGE: 850/900/1800/1900 MHz (Band frequency and data speed are operator dependent)". This would lead me to believe that it should be able to connect to the AT&T network here as it says it can connect to the 850/1900MHz frequency. I also looked underneath the battery to see the exact model and it's a RAPH100. I could swear I saw somewhere that this is the new North American version. I'm doing some more research and I'll post whatever I find in case it helps someone else in the future with my issue.
Sorry but almost all of us have the RAPH100 and we're all stuck with an almost useless g-note phone. It was an expensive lesson that may be salvageable if a radio antenna mod gets discovered and if not... it'll make a great paperweight.
I'm looking forward to the X1 or X1a or X1i or whatever they call it today.
Dammit
Well, I guess my ray of hope is now crushed. I can't wait around for a mod. I'm going to continue trying to send it back. I can't believe that they would say it connects to that frequency and not actually work. That's terrible. It reminds me of the whole problem with the missing drivers on the Kaiser. Time for another htclassaction.org website.
lokibjensen said:
While looking at what exactly I had purchased from Expansys I saw that they touted the phone as being, "Quad-band GSM/GPRS/EDGE: 850/900/1800/1900 MHz
Click to expand...
Click to collapse
Expansys have quoted correctly. GSM, GPRS and EDGE are all supported at these frequencies, but none of those technologies are 3G
Good luck getting a refund - it's not the retailers fault you didn't understand what you were buying
handsomedog said:
Expansys have quoted correctly. GSM, GPRS and EDGE are all supported at these frequencies, but none of those technologies are 3G
Good luck getting a refund - it's not the retailers fault you didn't understand what you were buying
Click to expand...
Click to collapse
Maybe they shouldn't sell a 3G phone in the US that doesn't do 3G. It's kind of hard in today's world to be up on every single kind of technology so one expects a company to list major issues such as this. I apologize that I'm not as knowledgeable as you about phone frequencies and protocols. I do know that there are a lot of other technical fields that I'm very knowledgeable about and would definitely try and give someone help without trying to put them down or make them look stupid because they didn't understand something that is not part of their expertise.
OKay well i have been looking into the hero as a new phone because its looks pretty kick A** but i noticed it has yet to have 3g capabilitites. I know the fcc approved it for the at&t bands but sometimes it never comes. I was thinking i had bought a diamond ALSO W/O 3g but htc updated its radio stack and it then suddenly did i was owndering if will also happen with the hero. thanks
Hello every one my name is Mike S.
I am the owner of a site called PremiumReview, i do reviews on Android base phones and other little things.
I'm looking to get a new Android phone I REALLY want the HTC Desire. But a few things its only available at telus and im on rogers(that's easy solvable, get it unlocked).
the biggest problem i am having is the telus does not have a EDGE/GSM network and only a CDMA/GSM. So I can load the phone up fine it will connect to rogers 3G network but if i get out of coverage of rogers 3G it loses all signal because the telus ROM on the phone doesn't know to look for EDGE only CDMA(that rogers doesnt have). So my questions is
1)how can I make the phone see Rogers EDGE network? and I would like to keep the HTC Sence UI
2)Dose any one have a modified ROM that they could send me / that could possiably unlock it to possiably a paypal cash reward. Expacly if it unlocks it to
I just bought a HTC desire (telus brand) to use on the att network. Will I have the same problem?
Hi Guys
A guy offered to exchange my SGS II for his sensation and i was thinking of going for it
Are there any problems with the US version of sensation ?
In my region, the mobile service is still GSM not 4G, do US versions of sensation support GSM or are they only 4G
Is the death grip problem serious or is it just someone trying to bash the sensation ?
Thanks
RADLOUNI said:
Hi Guys
A guy offered to exchange my SGS II for his sensation and i was thinking of going for it
Are there any problems with the US version of sensation ?
In my region, the mobile service is still GSM not 4G, do US versions of sensation support GSM or are they only 4G
Is the death grip problem serious or is it just someone trying to bash the sensation ?
Thanks
Click to expand...
Click to collapse
We've only had it a day but I haven't seen any complaints so far. My Sensation is amazing. Still to early to know if we have problems or not.
I've seen 4g, 3g, and Edge listed on mine. Luckily I mostly see 4g.
Hey Everyone,
Just bought a Bell Sensation from an online vendor (don't want to plug anyone) and I love it so far. Has anyone gotten H+ to work on this phone? If so, what are the correct APN settings? I live in outside of Dayton OH and I'm not sure we have 4g coverage but my Infuse used to show H+.
Thanks for the help.
I have. I got 6.8 down 1.1 up last night using the apn settings from this thread: http://forum.xda-developers.com/showthread.php?t=1186219&highlight=apn
Hope it helps
I used those settings. I guess my area doesn't have the coverage yet (matches with what the store told me). I will be in New York this week so I will try it as well.