[Radio] 2.05.00.06.10 WiMax update - EVO 4G Android Development

This is meant for 1.47.651.1 ROMs ONLY!
This is not the full radio but this will update the WiMax, recovery & kernel(same as in the OTA 1.47.651.1 zip).
Flash this through the bootloader like you would Toast's PC36IMG.zip(Power off, then Vol Down & Power button).
This will overwrite what ever recovery console you have, so once it's booted, replace the recovery console to what you were using before.
Also, this will not change the baseband version but it will update WiMax, so that's a start
EDIT: Full radio has been released, so removing this update

On a roll, dude. Donation is imminent.

I'm still not able to connect to 4g after appyling this update.

Looks promising.
I don't have 4G coverage here, but I flashed this radio upgrade against your rooted OTA Update ROM as a test.
I can confirm that nothing breaks =)
I was able to, without any problem, reflash the recovery I was using.
I can't wait for a full release that completely upgrades the radio!

and we will keep current rom settings and root with this?

Yes, your data & ROM are untouched as this only updates WiMax, recovery console & kernel

So, i understand this is not the full radio update..
But it WAS a full update with the OTA's that were sent out today right? I dont quit know what a radio.diff is (i think thats what they called it)

Excuse me for being a noob but does this mean that I will have do redo nand protection after I use this radio update? I did your update to OTA 1.47.651.1 without any problems. Thanks

mayfly82 said:
Excuse me for being a noob but does this mean that I will have do redo nand protection after I use this radio update? I did your update to OTA 1.47.651.1 without any problems. Thanks
Click to expand...
Click to collapse
no, you'll be fine doing this.

A 'diff' would be an update that only contains lines of code that changed from the original. This gives us a smaller payload making it less burdensome on the network for OverTheAir updates.

Touch censors are non responsive when flashing over Avalaunch's Froyo ROM via bootloader. Gonna have to flash Amon Ra's recovery via ADB. Also, the radio still shows up as version 1.39.00.05.31 is this expected? Thanks in advance.

c0mputerp0et said:
A 'diff' would be an update that only contains lines of code that changed from the original. This gives us a smaller payload making it less burdensome on the network for OverTheAir updates.
Click to expand...
Click to collapse
Nice! Thanks!!!
neckface said:
Touch censors are non responsive when flashing over Avalaunch's Froyo ROM via bootloader. Gonna have to flash Amon Ra's recovery via ADB. Also, the radio still shows up as version 1.39.00.05.31 is this expected? Thanks in advance.
Click to expand...
Click to collapse
"This is meant for 1.47.651.1 ROMs ONLY!" from the OP. Could be the issue. not sure if Avalaunch's has been updated yet.??

What exactly is meant by this line in the op?
"This will overwrite what ever recovery console you have, so once it's booted, replace the recovery console to what you were using before."
Details for a noob?
Really hope this update helps my 4G connection, otherwise I gotta return this phone ina few days

frettfreak said:
Nice! Thanks!!!
"This is meant for 1.47.651.1 ROMs ONLY!" from the OP. Could be the issue. not sure if Avalaunch's has been updated yet.??
Click to expand...
Click to collapse
Lawl Guess I neglected to notice that in my haste. I'll switch ROM's in a bit and give her a whirl again. Thanks.
EDIT: Got everything working again, flashed your OTA ROM and followed through with the radio. Sweet deal, man. Kudos again!

neckface said:
Lawl Guess I neglected to notice that in my haste. I'll switch ROM's in a bit and give her a whirl again. Thanks.
Click to expand...
Click to collapse
Coulda been an edit after the OP.. who knows.. and no prob man!! good luck!

frettfreak said:
Coulda been an edit after the OP.. who knows.. and no prob man!! good luck!
Click to expand...
Click to collapse
Nah, I saw what I wanted to see, or didn't, rather. Lol Everything's workin' now.

I know that this does not work... I tested it but maybe someone smarter can build off of it... In theory it should work but it doesn't on my phone... The file that it complains about is there maybe I just have the syntax wrong. Calkulin Please get this working.

Is there a reason we can't stick the radio diff into a PC36IMG.ZIP and upgrade via the bootloader as well?

I flashed this update over your release of today's update and 4G will start but will not connect. Any ideas of what I may have done wrong?

holob said:
Is there a reason we can't stick the radio diff into a PC36IMG.ZIP and upgrade via the bootloader as well?
Click to expand...
Click to collapse
we could try it... (you first) not saying that it will do anything bad but I have no idea.

Related

(Radio) All radio.img and update.zips Update-2!READ

BE EXTREMELY CAREFUL WHEN FLASHING OR MODIFYING THE RADIO.IMG AS THIS IS THE EASIEST WAY TO BRICK YOUR PHONE
All of the update.zips work 100% of the time. There has been no report of brick and i have used all of them at least once. if you dont like a new radio flash the old one. Good luck!
the stock radio.img is from the 1.56 RUU for the SPRINT CDMA HERO
There are three Radios here. stock, 2.41.04.02.03, and 2.42.00.03.10. they are in order from release date. high number=newer. radios are risky so i suggest sticking with one. they almost never cause worse performance. if you TRULY feel your signal has degraded i put the stock in here for you to return to.
Update!2 ok so with the new release of 2.42.01.04.27 i was kinda on the ehhh bar with it. i never like new releases because they will always take something from you.
so in this case they have taken the ability to use data with a .27 kernel. so if you flash this radio, you will not get data with any rom that has .27. including the fresh toast 1.1 and all 1.5's. so its up to you. i didnt gain one thing from this radio. battery life and signal stay 100% the same. i did lose data though.
so personally i would stick with 2.42.00.03.10
Please refer to this forum for troubleshooting.
http://forum.xda-developers.com/showthread.php?t=643796&page=10
and refer to this for instructions
http://geekfor.me/faq/flash-radio/
thanks to flipz and co for releasing the new radios.
I'm gonna wait for someone else to try this first
Avalaunchmods said:
BE EXTREMELY CAREFUL WHEN FLASHING OR MODIFYING THE RADIO.IMG AS THIS IS THE EASIEST WAY TO BRICK YOUR PHONE
Here is the stock radio.img
The new radio.img from flipz baseband 2.41.04.02.03
also both update.zip for stock and new.
Please refer to this forum for troubleshooting.
http://forum.xda-developers.com/showthread.php?t=643796&page=10
and refer to this for instructions
http://geekfor.me/faq/flash-radio/
thanks to flipz and co for releasing the new radio.
i do not claim any responsibility for damage done.
Click to expand...
Click to collapse
Just to be sure ... I am only asking this as a precaution as I do not want to brick my phone. These are for the SPRINT CDMA HERO correct? And when you say STOCK you mean the Radio that was originally installed on the SPRINT CDMA HERO like "out of box" so to speak?... Again I'm asking to clear up assumptions. a.k.a. (Click happy readers)
Is this for 1.5 as well or is this to be used only on fresh 2.0b
danimal_01 said:
Just to be sure ... I am only asking this as a precaution as I do not want to brick my phone. These are for the SPRINT CDMA HERO correct? And when you say STOCK you mean the Radio that was originally installed on the SPRINT CDMA HERO like "out of box" so to speak?... Again I'm asking to clear up assumptions. a.k.a. (Click happy readers)
Click to expand...
Click to collapse
this is in the cdma hero forums. so yes sprint hero i believe it has also worked for other cdma heros. the img is the stock radio from phones "with google" on the back.
thanks i wasnt too specific up top i guess i didnt re read lol
H4k3r4r34l said:
Is this for 1.5 as well or is this to be used only on fresh 2.0b
Click to expand...
Click to collapse
only tested on 2.0b but as i have said 1 million times before nandroid runs separate from the ROM. so it shouldnt matter. but it has only been tested on 2.0b
if you would like to test please do and post the results
I updated the radio to 2.41.04.02.02 earlier today and saw my download speeds decrease by about 50%. So I finally tried to flash back the Stock radio posted here. The good news it didn't brick my phone but it also didn't work. My phone still shows version 2.41.04.02.02. When I did the flash of the Stock radio file I never saw any error message and I didn't see the message about extracting radio file. Any ideas? Thanks
rjj1976 said:
I updated the radio to 2.41.04.02.02 earlier today and saw my download speeds decrease by about 50%. So I finally tried to flash back the Stock radio posted here. The good news it didn't brick my phone but it also didn't work. My phone still shows version 2.41.04.02.02. When I did the flash of the Stock radio file I never saw any error message and I didn't see the message about extracting radio file. Any ideas? Thanks
Click to expand...
Click to collapse
did you download the stock radio signed one? only that one will flash right.
justinisyoung said:
did you download the stock radio signed one? only that one will flash right.
Click to expand...
Click to collapse
Yes, that is the one I used.
that's weird.
hey, Avalaunchmods, when you reapplied the stock radio, did you check if it went back to the 1.0.xxxxxx version?
rjj1976 said:
Yes, that is the one I used.
Click to expand...
Click to collapse
hm that is weird. i checked and my baseband changed. ill have to look into it again. just use the stock img and flash it using instructions in the other forum i linked to.
Avalaunchmods said:
hm that is weird. i checked and my baseband changed. ill have to look into it again. just use the stock img and flash it using instructions in the other forum i linked to.
Click to expand...
Click to collapse
Do you mean the instructions on geekforme? If so, that is how I was trying to do it with the stock signed img. Thanks
rjj1976 said:
Do you mean the instructions on geekforme? If so, that is how I was trying to do it with the stock signed img. Thanks
Click to expand...
Click to collapse
well i just retried it with the attached signed stock radio.img and it worked correctly. you may want to double check that in nandroid you are selecting the stock one not the 2.41.04.02.03-signed.zip one
Just tried to restore stock radio, all it says it "Install from SDCard Complete", and baseband is still 2.blahblah..any tips?
scriz said:
Just tried to restore stock radio, all it says it "Install from SDCard Complete", and baseband is still 2.blahblah..any tips?
Click to expand...
Click to collapse
ok i think i know what caused this. although it says its still 2.blahblah its rlly the stock. the manifest isnt right so i guess it didnt apply. ill have a fix up but for right now your set with the stock radio.
It was the Stock img because is was the last one in the list to select. Are you using the instructions from geekforme to do the flash. That is what I was following.
rjj1976 said:
It was the Stock img because is was the last one in the list to select. Are you using the instructions from geekforme to do the flash. That is what I was following.
Click to expand...
Click to collapse
yes you did it right. it should have worked although it still shows the old baseband. you now have the old radio. its not updating that for some reason i will fix once i find out why
Can anyone else confirm decreased data speeds?
I'll do a quick little test in the mean time...
Avalaunchmods said:
yes you did it right. it should have worked although it still shows the old baseband. you now have the old radio. its not updating that for some reason i will fix once i find out why
Click to expand...
Click to collapse
Are you saying that my phone is now using the stock radio ver 1? If you are, I don't think it is because my download speeds are still way slower then before I did the ver 2 update.
Speedtest.net app available in market:
Phone was reset, then ATK was run killing all open apps. Test run at 12:30am so shouldn't be too much tower traffic, although my speeds never fall below 1000kbps
FACTORY RADIO
Test 1 (4/6 bars):
2239kbps down 671kbps up 285ms ping
Test 2 (5/6 bars):
1716kbps down 766kbps up 326ms ping
Test 3 (5/6 bars):
2199kbps down 617kbps up 342ms ping
UPDATED RADIO:
Speedtest.net app on phone.
Test 1 (4/6 bars):
2026kbps down 510kbps up 175ms ping
Test 2 (5/6 bars):
1671kbps down 715kbps up 183ms ping
Test 3 (5/6 bars):
1847kbps down 751kbps up 174ms ping
The decreased ping time is very obvious. Web sites start loading just a hair bit faster. The results are obvious ping times were cut in half!

Official 2.1 with Senseui for Rogers HTC Magic +

Hey guys check it out according to Rogers Mary, Rogers would be rolling out 2.1 with Sensui for Rogers Magic today. yay!!. See her tweet:
Hello!! HTC Magic+ Customers should expect HTC to start rolling out 2.1 OS today, OTA
Go grab it.
will be good news for our staff on stock phones.
For the unlocked ones, we're on 2.2 already.
Undoubtedly these will have a locked SPL on them so it will be a while before we can get them unlocked.
We need the OTA url!
I dunno if only phones in Canada using Rogers will get the OTA otherwise?
It is already available for an hour? Or two.
GreenEnvy said:
will be good news for our staff on stock phones.
For the unlocked ones, we're on 2.2 already.
Click to expand...
Click to collapse
Without Sense.
now the choice will be 2.1 + sense or 2.2 stock
Probably OTA update zip
Can someone look into this file? (Any developer?)
It looks like that OTA update, but is it so simple?
I see there is new radio, and probably the whole "system" folder.
Yes 2.2 that runs decent at best. This is made for our devices, it has to be good!
Bring it on Rogers!
Someone upload it when you guys get it
BTW, just flash the system and boot images without that SPL and whatever the fuss is about..
Can i install this update even thought i haven't a rogers 32A? and if yes, should i flash via recovery?
RUU is available here:
http://www.htc.com/ca/support/h/magic-update
MARCO310791 said:
Can i install this update even thought i haven't a rogers 32A? and if yes, should i flash via recovery?
Click to expand...
Click to collapse
provaci
Is it possible to flash this while maintaining the hboot, spl and recovery? I am lazy to redo the whole root process again, which most probably will not work if I run this RUU straight away?
32A Asia here.
Through recovery it doesn't work for me. it says E:No signature (663 Files)
E:Verification failed
Aborted
any help?
?!?!?!?!
Just came home from school and saw this??
OFFICIAL 2.1 for ROGERS?!
Anyway to install this on european 32a magics?
Please tell!
i changed also radio with the new one in the archive but nothing, still instalation aborted.
MARCO310791 said:
i changed also radio with the new one in the archive but nothing, still instalation aborted.
Click to expand...
Click to collapse
You NEED to have both stock latest 1.5 rogers rom installed AND stock recovery that came with that rom installed too...otherwise it won't work as for one...it will fail with verification of the recovery and two....it scans MD5 of the installed apps, so unless you have rogers 1.5 update, it will fail there too.
Martineq said:
Without Sense.
Click to expand...
Click to collapse
So? This is only useful to those on the stock OS, others will no doubt be disappointed especially when they can't change their mind and go back to freedom. If Sense is that important then lock yourself in and enjoy the ride. What this might be good for is to assist the devs in improving the already better roms.
klothius said:
You NEED to have both stock latest 1.5 rogers rom installed AND stock recovery that came with that rom installed too...otherwise it won't work as for one...it will fail with verification of the recovery and two....it scans MD5 of the installed apps, so unless you have rogers 1.5 update, it will fail there too.
Click to expand...
Click to collapse
You're right...I will wait for a smoki rom based on this update...in next couple of days i hope...i can't wait...i want try this official rom right now!
working on it
Thank you very much!!!!!!

[RUU] Official 2.31.651.7 in ZIP Format, Flashable from Fastboot

As the title says, here's the Rom.zip extracted from RUU_Hero_C_Sprint_2.31.651.7_signed_release.exe for those that don't use Windows, or prefer to have their RUU in zip format.
This will flash your phone to 2.31.651.7 STOCK.
http://www.mediafire.com/?m6x4sr682ruk027
Simply rename this to HERCIMG.zip and place on the root of your SDCard.
Power your phone completely off.
Press and Hold VOL DOWN and POWER until your phone boots into HBoot mode.
Wait for it to verify the zip, then click <ACTION> (Trackball) to update, or <SEND> (Green Call) to cancel.
Enjoy!
Here's my guide to rooting .7:
http://forum.xda-developers.com/showthread.php?t=804296
Personally..I want to say THANK YOU, THANK YOU, THANK YOU.
I have spent the last four hours searching for this. This needs to be stickied. I'm bookmarking it for sure. This got my phone unbricked..I thought all hope was lost and I would have to call in for warranty support (I got mine refurbed through Sprint last October..so I don't even know if I would still have any warranty support), and see if I could try my luck and getting it replaced, since that is what others have said to do as apparently this file from OP, did not exist.
And so for future reference, so that others don't go mindlessly searching through the forums.
If you
a.) Managed to overwrite your Recovery some how or completely delete it. (I did..and from searching this and many other forums over the past couple hours..I can see I wasn't the only one), and also have no boot (or a corrupted boot loop)
b.) Still have S-ON (You can find this out by powering off your phone and then pressing and holding the power button and the lower volume button), I recommend you turn S-Off for future reference if you're going to be dealing with customer ROMs a lot (so you don't have to go through the hell I just did..). See here..
http://forum.xda-developers.com/showthread.php?t=759955
c.) Have an updated Hboot (1.47) (you can also find this info. in part b.)
....then you KNOW that you are stuck. Because you
a.) Cannot flash a ROM in Recovery because you cannot access it.
b.) You cannot access ADB because your phone won't go that far and will only go into fastboot..
c.) But even though you have access to fastboot you can't do ANYTHING like flash a recovery image or a ROM..or anything for that matter..because S is still ON. (this is the "not allow" messages you will see pop up.)
d.) You have bootloader 1.47 so if you for example, were like me couldn't use this file here.. (http://forum.xda-developers.com/showthread.php?t=657086), because it would say there was a newer version and wouldn't install it.
So this file right here..was the only thing getting my phone back to a usable state. And considering that my searches have shown to pretty much give up all hope and have it sent it for warranty repair, then I think this thread deserves a bump for all those that have screwed up.
Yeah..I have to start ALL OVER now from a stock ROM (thank god for nandroid), but at least my phone isn't a dead brick.
Just thought this needed a well deserved bump.
I wonder if there is a RUU for the latest .2?
Wanted to say BIG THANKS. This worked like a charm to update prl/profile. Keeping two copies of this one on the sd and on the laptop. Thanks again.
Yea it's me Again. With the
Modified .HERO.
laie1472 said:
Wanted to say BIG THANKS. This worked like a charm to update prl/profile. Keeping two copies of this one on the sd and on the laptop. Thanks again.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
Forgive me for seeming NOOBish... but I can use this to do the same, then restore Nandroid back and it will keep the PRL/Profile update?
Just wondering... lolz, thanks!
Yup But you will have to reroot. This takes root from you. You will have to reroot with the Hero rooter from Reg or Z4 or one click root. But read read read. And as far as the prl/profile yup it will stick. When your phone boots up after running this just go into settings and updates and choose update profile and update prl don't update firmware. I repeat don't update firmware. After that just reboot and check your prl should be 60675. After that reroot, then flash a recovery and then nand restore. Hope this helps good luck
Remember this returns you to stock you will loose root and recovery..
Yea it's me Again. With the
Modified .HERO.
Why don't you guys just flash NFX's or LS's already rooted and way faster stock sense ROM to update PRL, etc?
Running stock ROM has to be one of the worst things ever after being on custom ROMs for so long.
I tried flashing almost ever sense rom on here pmgrands port, ninfintes stock odex and deodex and his apps 2 sd builds he has like 4 or 6 different builds. Tried flashing liquids builds beta and stable. All gave me a error. So I had to use this. I couldn't flash any sense rom
and it was easier to use this than try to figure out y. If he can flash a sense rom then yea that's the easier way but if not this is a for sure way to get back to stock.
Yea it's me Again. With the
Modified .HERO.
laie1472 said:
I tried flashing almost ever sense rom on here pmgrands port, ninfintes stock odex and deodex and his apps 2 sd builds he has like 4 or 6 different builds. Tried flashing liquids builds beta and stable. All gave me a error. So I had to use this. I couldn't flash any sense rom
and it was easier to use this than try to figure out y. If he can flash a sense rom then yea that's the easier way but if not this is a for sure way to get back to stock.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
I still have my original nandroid from before I flashed any ROMs and it takes me back to stock Sprint, where I do my updating. Is this faster than that?
jckeyser said:
I still have my original nandroid from before I flashed any ROMs and it takes me back to stock Sprint, where I do my updating. Is this faster than that?
Click to expand...
Click to collapse
Yup. That's way better and faster. Just go into settings / updates. Then just update prl and profile. Don't update firmware. After you confirm that your updated just nand restore and you should be good.
Edit not sure if you would have to reroot.
Yea it's me Again. With the
Modified .HERO.
Thanks for the reply's all... I like Sense and have NFX rom on my Hero, loaded a few ROMS but they won't update, so no worries, when I have some free time I'll sit and do it then. I don't like the one click rooters nor the clockwork recovery, I guess I'm old school and do it the hard way, lol, but thanks for letting me know it'll work (prl update) and stay on the handset!
Regards!
Without opening a huge can of worms I would like to know whats the best newest rom out there with sense I just searched for like 3 hours and lot of threads are old and I want what ever is new with sense also would like to upgrade to 2.2 im on Honeybun v.-2 lite firmware 2.1 update1
Gelladuga69 said:
Why don't you guys just flash NFX's or LS's already rooted and way faster stock sense ROM to update PRL, etc?
Running stock ROM has to be one of the worst things ever after being on custom ROMs for so long.
Click to expand...
Click to collapse
you got a link ? Im searching now
laie1472 said:
Yup. That's way better and faster. Just go into settings / updates. Then just update prl and profile. Don't update firmware. After you confirm that your updated just nand restore and you should be good.
Edit not sure if you would have to reroot.
Yea it's me Again. With the
Modified .HERO.
Click to expand...
Click to collapse
No need to reroot because it was a nandroid. Can't make a nandroid if you're not rooted.
Sent from my HTC Hero CDMA running Android 2.3
Does anybody have the original MD5 checksum for this file? I wanna make sure this file downloaded properly. Thanks in advance!
EDIT: efa439da700b5fad7ea49915ef7d2866
Sent from my HTC Hero CDMA running Android 2.3
does this work with any version of HBOOT? The phone I am dealing with has stock 1.5
mrtimo said:
does this work with any version of HBOOT? The phone I am dealing with has stock 1.5
Click to expand...
Click to collapse
What? Is your phone even rooted? Sprint upgraded to 2.1 a LONG time ago, the update is available at www.htc.com
It worked for me a while ago, but my dad just got a new hero so I tried using this, and it wouldn't recognize the image file.. any thoughts?
systemshock869 said:
It worked for me a while ago, but my dad just got a new hero so I tried using this, and it wouldn't recognize the image file.. any thoughts?
Click to expand...
Click to collapse
yeah, this only works if he has an S-off bootloader, which he doesn't have if it's a new hero.
il Duce said:
yeah, this only works if he has an S-off bootloader, which he doesn't have if it's a new hero.
Click to expand...
Click to collapse
According to the OP this one was extracted from the RUU, so it *should* work S-ON.

Telus Froyo Update file

I snaged the update file before it updated my phone. If anyone wants the file let me know I will post the file on a server for people to snag.
File that came accross over wifi update.
OTA_Bravo_Froyo_TELUS_WWE_2.25.661.2-1.29.661.1_R_release_Pf7sjzjrgcmpsve12.zip
I'd like to keep a copy just in case I need to return my phone. What radio version does it install?
This is pretty useless, as you have to run stock for it to work, it's not a RUU.
Here is the link to the update: http://fotadl.htc.com/OTA_Bravo_Fro....2-1.29.661.1_R_release_Pf7sjzjrgcmpsve12.zip
ajanu said:
I'd like to keep a copy just in case I need to return my phone. What radio version does it install?
Click to expand...
Click to collapse
Agreed. Please post a copy.
damn, just checked the HTC site and there is no RUU posted. thats bad news...they posted it for the Hero last week though...? wonder why they decided not to post it for the desire.
peytral said:
This is pretty useless, as you have to run stock for it to work, it's not a RUU.
Click to expand...
Click to collapse
The only thing useful in there is the radio. I'm running it
I did the OTA update this morning on a different Desire (from rooted 2.1) and the file it downloaded has a different ending number, I wonder if it matters, I saved the file to my laptop. The "Pf7sjzjrgcmpsve12" is what of concern, would that work on any other Desires?
Nevermind, I think they're the same number.
i would like if there was a RUU for this. Is there a way to make an RUU out of the files it has so i can do a clean install and wipe my desire? by the way how did you find that link off the htc website for the update?
Since I have a backup of 2.1 just after I rooted, I should be able to install that then use this zip correct? What radio version is included?
Here is a link to the RUU named properly that I used to fix a non-bootable phone.
PB99IMG.zip
marinierb said:
The only thing useful in there is the radio. I'm running it
Click to expand...
Click to collapse
Does the new radio provide much better signal?
Im running the stock 2.2 that was available for the A8181 a few months back. My phone isnt rooted and i used to gold card method to get it installed.
Is there a way for me to get this new radio?
Thanks for the file.. its nice to be able to revert to stock without having to run the RUU. I appreciate the work you did making this!
peytral said:
This is pretty useless, as you have to run stock for it to work, it's not a RUU.
Here is the link to the update
Guys on Leedroid right now. But really want to go back to my Telus froyo as 3g tethering is acting up. I tried installing this in the boot menu but I cannot what am I doing wrong? Please help?
Click to expand...
Click to collapse

update radio with hboot 1.08

hi there,
I have Hboot 1.08, is there any flash-able zip files to update the radio?
Check the op of the OTA update thread in this very section
Sent from my HTC One S
ultimul said:
hi there,
I have Hboot 1.08, is there any flash-able zip files to update the radio?
Click to expand...
Click to collapse
The answer is yes, so do as Pheroh says
Try to either flashing through recovery or manually dd-ing the image files.
Don't take an OTA or run an RUU, as that will update your HBOOT.
You want to stay on 1.08.
-Jobo
I dont want the OTA update, anyway the phone is rooted and using custom rom so dont think ota will ever work.
where can I find the latest radio, zip files flashable thru recovery or fastboot?
touch of jobo said:
Try to either flashing through recovery or manually dd-ing the image files.
Don't take an OTA or run an RUU, as that will update your HBOOT.
You want to stay on 1.08.
-Jobo
Click to expand...
Click to collapse
ultimul said:
I dont want the OTA .. where can I find the latest radio, zip files flashable thru recovery or fastboot?
Click to expand...
Click to collapse
This is the thread Pheroh was referring to: OTA Update to Android 4.0.4 for S4 is Out! You can extract the images from the OTA .zip or use any of the methods explained in post #1.
I used the one by Dima901 and flashed thru twrp
https://www.dropbox.com/s/zvi1a70n41yy2ri/radio_OTA_19072012.zip
rugmankc said:
I used the one by Dima901 and flashed thru twrp
]
Click to expand...
Click to collapse
10x a lot;
flashed thru recovery in no time.
hope will solve the few little problems with data and Bluetooth I had.
It has helped many from reading posts. I am not sure I gained anything though.
But, always nice to have latest anything--
rugmankc said:
It has helped many from reading posts. I am not sure I gained anything though.
But, always nice to have latest anything--
Click to expand...
Click to collapse
I can only hope will improve something. I have a problem with data switching from G to 3G to H for few seconds when I first start every session, I dont know it has impact on actually speed;
most annoying is the Bluetooth dropout from time to time, even at (very) short distances, my earpiece has no problem cause i tested with my other phones.
Anyway, if things goes wrong I still can go back to 0.16 radio I had before ( I hope at least )
Yes, flashing radios is Rom independent. Just don't upgrade to hboot .13 or higher. Or, you will have issues flashing radios. Hope new radio helps.
rugmankc said:
Yes, flashing radios is Rom independent. Just don't upgrade to hboot .13 or higher. Or, you will have issues flashing radios. Hope new radio helps.
Click to expand...
Click to collapse
for the moment I use trickdroid 6.0, probably I'll change in the future if support and updates stop;
from what I know, changing rom's shouldn't change the hboot, only ruu upgrade will change it. true?
correct-
radios and hboots stay unless flashing a ruu
if/when we get s-off then hboot can be changed and we will be able to adjust partition table sizes for more data size
first day of testing, results are confusing
the data icon stays now mostly at 3G, think this is the real provider network; the differences in speed are not noticeable
for the bluetooth, the same thing, earpiece disconnect after few minutes even if with the phone in my hand; something is wrong here; I'll have to look for my older earpiece to try it. maybe plantronics 520 is not fully compatible with htc one s
should I try a custom kernel? any chance will help?
I had the Bluetooth disconnect issue . Haven't flashed a radio yet but flashing the Sensisimo Rom has seem to have fixed the Bluetooth disconnect. Fix could have something to do with the Rom being based off the latest update available (2.21 or something like that). I'm having data disconnect issues, does new radio fix it?
T-MobileUS HTC One S
I would try it, no harm done
looks like bloetooth disconnect is a small bug in trickdroid 6.0; tried another 2 earpieces and all are doing the same;
just flash trickdroid 7.1.0, I'll try it tomorrow and came back with feedback.

Categories

Resources