Related
i have downloaded the tnt cab file & coppied them to windows is that correct or were must i place the to install ?
??? You must click on the cabs to install it in WMobile.
have tried (setup in cabs)
jacknjill said:
??? You must click on the cabs to install it in WMobile.
Click to expand...
Click to collapse
the cab shows it is installed but the program dose not run.
The Cabs...
Try Copying the cabs in my documents folder. and afer that , go using the file manager and run them. that should work
did you reboot?
i have just done that bet still the same have softreset & booted again but no programs.
Robertnam said:
am i stupid or what
Click to expand...
Click to collapse
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
dharvey4651 said:
Wait a seccond... There are cab files for roms these days? When did this happen and why wasn't I informed? lol
Click to expand...
Click to collapse
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
asctony said:
rkwhyte2 said:
This really is the key isn't it? I think the OP is trying to execute the upgrade program from his phone.
To the OP you must run the upgrade from a Windows PC.
Kirby[/QUOTE
I cannot use ActiveSync (any version) to upgrade my MDA. I have been all over this site and other sites. I have tried everything to get ActiveSync to work and connect to my phone. I have had a lot of people on this forum trying to get me operational. No Luck.
So, can I donwload a CAB file to upgrade my Phone ISP/SPL and OS to my MDA SD card and then install from the SD Card like I do other apps?
I believe the answer is no based on this thread. But, I will not give up hope.
Thank you in advance.
ISP/SPL 2.26
Radio 2.25.11
OS WxtROM 2.26.10.2
MSW CE 5.1.195
Click to expand...
Click to collapse
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom. will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
neva dinova said:
asctony said:
maybe i missed it but have you tried forcing your phone into bootloader and loading a new rom.
No, I have not tried forcing my MDA into bootlader and loading a new rom. Not sure what to do?
will your usb not work or do you not have access to a computer with activesync???
Click to expand...
Click to collapse
My 4 PCs recognize the MDA as a Windows Mobile device, but AS will not connect.
Have uninstalled and reinstalled all versions of AS from 4.1 - 4.5.
Thanks for your input and time. I do appreciate it.
Click to expand...
Click to collapse
swingheim said:
I was going to go with "what", but after carefully considering your question, and reading your comments, I think I have to go with "stupid".
Click to expand...
Click to collapse
I'll go with "stupid" too
oscarillo said:
I'll go with "stupid" too
Click to expand...
Click to collapse
Please guys, I am asking nicely now. This is not a place to insult other people.
Just answer questions if you know the answer or don't bother at all if you don't want to help.
NOTES :
In order to upgrade a ROM, you'll need a PC with ActiveSync installed and an USB cable to connect them
There is the possibility to flash from SD card but that is only in emergency cases, and it's not recommended. Plus i don't know if it will work unless the SD Image isn't your own.
Ok I have the LG-P999dwp version, and was in unable to do the update through the lg updater. Was told that i have latest version. I am also running win7 ultimate and the KDZ program would always crash, so i found a work around.
I downloaded the LG kdz program and the V21_00.Kdz file You can get them from here, http://forum.xda-developers.com/showthread.php?t=1179750 here are pics to help you do this on a windows 7 ultimate and should work for any version of win 7.
The pictures show you what to do.
1: open the KDZ program ( follow the instructions in the read me )
then keep the cdma and DIAG alone and choose the browse and click on the V21E_00.KDZ file.
Sorry if this has been posted but i searched and could not find anything on how to do this. I was working out a few ways to do this on win 7 without installing win xp
2:Click on read phone information at the bottom of the program.
3:Click on Upgrade Start
4:Change country to different country and change Language to english
5:click ok and this opens up the LG updater and will push the update of GB to your phone on windows 7 machine and for phone with LG-P999dwp model # (aka refurb)
thank you soo much!
Works!!! Just follow the steps exactly. My wife has a p999dwp and I have a p999dw. Ive been trying to get Gingerbread on hers for two days now (the official way). I can now find one complaint about the update, I love it. I haven't used Bluetooth yet though. Thanks so much.
Thanks... Worked perfectly....
Just in case anyone wants to know .... I put my phone back to stock and unrooted before I did the update process.... Everything went smooth, update process took about 10 minutes.. Thanks again Bullseye....
I can't get into S/W Update mode now to flash ClockworkMod ???
EDIT: Never mind...had to try it a bunch of times (volume down and plugging in) before it worked
see my only problem is everytime i try to install the lg updater tool it stops quarter of the way and doesnt move, i have a windows 7
how did u guys get the update tool to install, i run it as administrator and it starts but then stalls quarter of the way? and it told me i had to install the tool , but then i just tryed launching the update and it started the process, of course i didnt try with the phone plugged in, what do u guys think
It doesn't even want to read my phone info....it gives me Get Chiptype Error. Tried with Debug mode too-still nothing. It keeps freezing on me....I am running Win7 Ultimate 64bit.
Anyone else having the same issues. I have all the drivers installed.
you have to be in stock 2.2 froyo doesnt matter if youre rooted or not, and stock recovery, and run the tool while booted into froyo with usb debugging on .. and i dont know but i had my sd card mounted
and by the way if this worked for you THANK the freaking OP because he figured it out and you couldnt he's awesome, love you man xD
sincest said:
you have to be in stock 2.2 froyo doesnt matter if youre rooted or not, and stock recovery, and run the tool while booted into froyo with usb debugging on .. and i dont know but i had my sd card mounted
and by the way if this worked for you THANK the freaking OP because he figured it out and you couldnt he's awesome, love you man xD
Click to expand...
Click to collapse
I am running stock Froyo and I am not rooted. I have stock recovery as well. I keep getting the same error...it starts reading my phone info and then Bam! Get Chiptype Error!
yes sir , for sure so sincest your talking about the lg update tool ur telling me i have to install it with the phone actually plugged in?
doesnt really matter, i had it unplugged till the window like the screenshot came up, try reinstalling the 3.x.x drivers from LG theres a thread somewhere and then plug your device in a different usb porn and wait for it all to install
It doesn't work for me guys. Tried reading the phone info as advised-it can't complete the operation. I get the stupid error and nothing happens. Don't know how to go around that error. Tried running the R&D tool in compatabilty mode and still got the same error.
Anyone else having the same issue?
wm2485 said:
Works!!! Just follow the steps exactly. My wife has a p999dwp and I have a p999dw. Ive been trying to get Gingerbread on hers for two days now (the official way). I can now find one complaint about the update, I love it. I haven't used Bluetooth yet though. Thanks so much.
Click to expand...
Click to collapse
Do you guys click on read phone info button on the second screen as well? That's where I am getting the Chiptype Error. Have you guys tried that? I am afraid if the tool doesn't read the phone info it won't be able to update it properly and I may brick my device. Any advises?
dude i cannot get B2Cappsetup to run! sucks it just stops quarter of the way
Did you install the msi file in the kdz folder... And I only clicked read phone info at the beginning ..
Sent from my LG-P999 using XDA Premium App
try skipping the read info and just click start upgrade.
sarni84 said:
dude i cannot get B2Cappsetup to run! sucks it just stops quarter of the way
Click to expand...
Click to collapse
Does it give some kind of an error? What kind of windows are you running?
Try rebooting your PC and reinstalling it... Only thing I did was downloaded the LG updater the other day and reinstalled it ... after it installed I connected my phone and it installed some drivers...
Sent from my LG-P999 using XDA Premium App
Hi,
Since ICS update I have been going insane with the speed of my phone, and today I saw my friends Desire HD running Jelly Bean and it was flying. So naturally I have spent the last 5 hours reading up on how to get it!
I'm an absolute noob with Android, this is my first android and I my other smart phones ran windows 5.5 and 6.5 so however buggy the new OS it can not beat them.
I am confused about a couple of things and I have found many many guides that go in circles. my HBOOTS 1.29
1. Do I need S-off or do I just need my device rooted?
I have found the following guides that seem the most effective:
http://forum.xda-developers.com/showthread.php?t=1661631
2. What is Flashing Firmware and why do I need to do it?
http://forum.xda-developers.com/showthread.php?t=1472298
http://forum.xda-developers.com/showthread.php?t=1377759
3. It seems the best ROM is this:
http://forum.xda-developers.com/showthread.php?t=1782009
Are there anything better?
I don't care about looks, I want the usual phone features, speed, GPS, better battery life and bluetooth connectivity to my external Pressure Variometer (I use it for Paragliding). I don't care about issues with Wifi!
Many Thanks and sorry for repeating previous posts at times
You have 2 options. 1.) S-OFF your device, following the guide you linked. It opens up the whole phone, so after that you can do whatever you would like to. (Recommended)
2.) Unlock your bootloader through HTCDEV.COM website. (If you choose this, you can still install custom roms, but are unable to flash firmware/radio. For more info how to install custom roms with s-on see HERE)
Flashing the newest firmware is "always" an extra. They all come with stability/performance/radio... enhancement. ICS firmwares are 3.32 or 3.33. Whichever you have installed on your device, you are good to go as all recent ICS and Jelly Bean roms are working under both firmware. Some of them recommend 3.33 but are still working on 3.32. As far as I know 3.33 comes with newer radio...?
Rom-wise... It is really up to you what you are looking for and what you expect from your phone. Have a look around in the development section, there are plenty of custom roms/kernel about, either it is aosp/cm or sense based roms. They are all excellent and come with amazing support.
Have fun and good luck! :good:
edit: Have a look HERE too for some more info!
S-on/off
Is it possible to install a ROM on the phone with S-on and on the new rom later turn S-off if required. As I mentioned I'm new so I want to do one step at a time.
kapateh said:
Is it possible to install a ROM on the phone with S-on and on the new rom later turn S-off if required. As I mentioned I'm new so I want to do one step at a time.
Click to expand...
Click to collapse
in order to S-OFF you must have rooted stock rom
it is mentioned also in S-OFF guide
HTC Sync issue
Hi,
I have just tried to get started on the process of rooting from HTCDev however my phone is unable to connect to my PC. (not a great start I know )
I have installed HTC sync however it can not connect to my PC either. Would resetting my phone to factory settings sort the issue?
Many Thanks
kapateh said:
Hi,
I have just tried to get started on the process of rooting from HTCDev however my phone is unable to connect to my PC. (not a great start I know )
I have installed HTC sync however it can not connect to my PC either. Would resetting my phone to factory settings sort the issue?
Many Thanks
Click to expand...
Click to collapse
Hi,
You do not need to do anything to your phone.
You need to have the correct drivers on your PC.
If you are on a windows 7 or 8 then use THESE DRIVERS
Did you restart your PC after installing HTCSync?
kapateh said:
3. It seems the best ROM is this:
http://forum.xda-developers.com/showthread.php?t=1782009
Are there anything better?
Many Thanks and sorry for repeating previous posts at times
Click to expand...
Click to collapse
I think u should try this one..and leave ur friends 4.1.2 behind and came up with 4.2.1..hehehe :laugh:
http://forum.xda-developers.com/showthread.php?t=2115520
issue
malybru said:
Hi,
You do not need to do anything to your phone.
You need to have the correct drivers on your PC.
If you are on a windows 7 or 8 then use THESE DRIVERS
Did you restart your PC after installing HTCSync?
Click to expand...
Click to collapse
Thanks for the email, but do you have the 32 bit drivers?
I have also restarted my PC
kapateh said:
Thanks for the email, but do you have the 32 bit drivers?
I have also restarted my PC
Click to expand...
Click to collapse
Hi,
Sorry,no,I do not have 32 bit drivers.
Did your pc recognize your phone after the reboot?
kapateh said:
Thanks for the email, but do you have the 32 bit drivers?
I have also restarted my PC
Click to expand...
Click to collapse
try universal naked drivers...these will surely solve your problem.. just open the device manager and select driver location..
http://forum.xda-developers.com/showthread.php?t=1998650
HTCDev
Hi, Thanks for the help.
I have uninstalled HTC sync and installed the naked drivers. I have been following the HTC Root, when I run the command "fastboot oem get_identifier_token" in fast boot, it displays 'waiting for devices'. How long do you normally have to wait for the token?
Many Thanks
connection problem remains
kapateh said:
Hi, Thanks for the help.
I have uninstalled HTC sync and installed the naked drivers. I have been following the HTC Root, when I run the command "fastboot oem get_identifier_token" in fast boot, it displays 'waiting for devices'. How long do you normally have to wait for the token?
Many Thanks
Click to expand...
Click to collapse
Hi, I just installed HTC Sync however my phone still fails to connect.
any more solutions?
kapateh said:
Hi, I just installed HTC Sync however my phone still fails to connect.
any more solutions?
Click to expand...
Click to collapse
Hi,
Make sure you are not using a USB hub or USB 3.0 connection.
Try different USB ports.(front and back)
Try a different PC/laptop.
connection problem remains
malybru said:
Hi,
Make sure you are not using a USB hub or USB 3.0 connection.
Try different USB ports.(front and back)
Try a different PC/laptop.
Click to expand...
Click to collapse
I tried all of the above (last one both on win 7), still no connection
kapateh said:
I tried all of the above (last one both on win 7), still no connection
Click to expand...
Click to collapse
did you enable usb debugging mode from settings?
Debugging
rzr86 said:
did you enable usb debugging mode from settings?
Click to expand...
Click to collapse
No, it automatically enables. Even when I disable it and try syncing, it enables by itself, with a notice of course.
kapateh said:
No, it automatically enables. Even when I disable it and try syncing, it enables by itself, with a notice of course.
Click to expand...
Click to collapse
r u using fastboot through sdk...or alone...means only fastboot.exe and adb.exe and some other dll files instead of sdk...if that...than open ur system properties...click advanced system setting..click environment variables..in list select path..and edit..add ur fastboot.exe path there if its not present...just like that..."C:\fastboot\fastboot.exe;"(without quotation marks)..ur problem 'll be solved
Problem still there
Jawwad.John said:
r u using fastboot through sdk...or alone...means only fastboot.exe and adb.exe and some other dll files instead of sdk...if that...than open ur system properties...click advanced system setting..click environment variables..in list select path..and edit..add ur fastboot.exe path there if its not present...just like that..."C:\fastboot\fastboot.exe;"(without quotation marks)..ur problem 'll be solved
Click to expand...
Click to collapse
Problem still persists, waiting for device.
Also I have installed MyPhoneExplorer which can sync from my phone.
kapateh said:
Problem still persists, waiting for device.
Also I have installed MyPhoneExplorer which can sync from my phone.
Click to expand...
Click to collapse
Problem is not about htc sync or other software...Follow the steps...fastboot works even without adb or others..personally tried on senation and atrix..
1)Install drivers (naked)..check in device manager..it ll show htc device...
2)Download fastboot..and place it on any drive where u can access easily...file attached..
3)Set Path if already not...snap attached..
4)Trun off ur device and boot into hboot...select fastboot and it 'll show bootloader and other options...
5)attach ur device now...and start with start here.bat file..
6)if not worked..then run above file as admin or try to restart ur pc..
whoohoo
Jawwad.John said:
Problem is not about htc sync or other software...Follow the steps...fastboot works even without adb or others..personally tried on senation and atrix..
1)Install drivers (naked)..check in device manager..it ll show htc device...
2)Download fastboot..and place it on any drive where u can access easily...file attached..
3)Set Path if already not...snap attached..
4)Trun off ur device and boot into hboot...select fastboot and it 'll show bootloader and other options...
5)attach ur device now...and start with start here.bat file..
6)if not worked..then run above file as admin or try to restart ur pc..
Click to expand...
Click to collapse
Great, thank you that seemed to have worked I'm going to now proceed with S-off and ROM installation. Will undoubtedly re-post again.
Just one more question, Do I need to delete/format the files off my SD card or not, I have backed up anything of value.
Also the network is not unlocked, would the network be unlocked with a new ROM?
Hi. Please could somebody help me. I have a UK model from orange. It's now unlocked but has orange bloatware. I have searched the forums for a debrand method but only found one, and that only works with win xp.
Is there any way to unbrand this phone with windows 7. Orange did not support this phone and it's still stuck on android 2.2.2.
Thanks in advance
miniyon said:
Hi. Please could somebody help me. I have a UK model from orange. It's now unlocked but has orange bloatware. I have searched the forums for a debrand method but only found one, and that only works with win xp.
Is there any way to unbrand this phone with windows 7. Orange did not support this phone and it's still stuck on android 2.2.2.
Thanks in advance
Click to expand...
Click to collapse
AFAIK by installing any custom ROM your phone will be unbranded.
me2freedom said:
AFAIK by installing any custom ROM your phone will be unbranded.
Click to expand...
Click to collapse
Thanks for the reply. I'm after an original LG firmware though.
miniyon said:
Thanks for the reply. I'm after an original LG firmware though.
Click to expand...
Click to collapse
Have you tried updating your phone through EMERGENCY mode in LGFlashTool? Maybe you'll get stock ICS / JB because the branded ones are not made by LG?
03D
me2freedom said:
Have you tried updating your phone through EMERGENCY mode in LGFlashTool? Maybe you'll get stock ICS / JB because the branded ones are not made by LG?
Click to expand...
Click to collapse
Wow, i had no idea ? Who made them ?
How do i go about the process ? To be honest, i'm quite nervous about doing it. I've unbranded a number of phones in the past but this a tad more complicated.
I really appreciate that you have continued to be of help. Thankyou !
miniyon said:
Wow, i had no idea ? Who made them ?
How do i go about the process ? To be honest, i'm quite nervous about doing it. I've unbranded a number of phones in the past but this a tad more complicated.
I really appreciate that you have continued to be of help. Thankyou !
Click to expand...
Click to collapse
Could you try this?
I've done it a few times myself, with succes, and I think this is the way I've managed it.
*This asumes you've installed
Follow this on the official LG site: http://www.lg.com/uk/support-mobile/lg-LGP920 , and go to the tab "software update".
But instead of just updating your phone do this: Click on User/Support (above) then emergency mode, insert your IMEI and click on check
?
It didn't work i'm afraid. What's really odd is that the phone is on froyo 2.2.2 and the OTA update from the phone says there's no update available. Yet the lg update tool tells me an update is available yet after it has downloaded and about to 'install' it stops and says that the update cannot continue because a 'fatal error' has occured ?
Very odd. I'm guessing the orange bloatware is the problem. I HATE orange !
Edit. Ok, i just installed all the flashing tools to my pc (win 7) But when i open flash tool a window appears saying 'lg usb/parallel key is not detected. i'm also asked for a password and id ?
miniyon said:
It didn't work i'm afraid. What's really odd is that the phone is on froyo 2.2.2 and the OTA update from the phone says there's no update available. Yet the lg update tool tells me an update is available yet after it has downloaded and about to 'install' it stops and says that the update cannot continue because a 'fatal error' has occured ?
Very odd. I'm guessing the orange bloatware is the problem. I HATE orange !
Edit. Ok, i just installed all the flashing tools to my pc (win 7) But when i open flash tool a window appears saying 'lg usb/parallel key is not detected. i'm also asked for a password and id ?
Click to expand...
Click to collapse
If you follow this guide you know you got al the right settings: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html , it also has pictures to help you, and get the firmware from: http://forum.xda-developers.com/showthread.php?t=2217180
no crack
me2freedom said:
If you follow this guide you know you got al the right settings: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html , it also has pictures to help you, and get the firmware from: http://forum.xda-developers.com/showthread.php?t=2217180
Click to expand...
Click to collapse
I downloaded everything but there was no crack included for the flashtool and no .dll file to enter into the flashtool ? it certainly looks incomplete so did not help at all.
Do i really have to keep entering an image verification everytime i need to reply on my own thread ? Seems so daft.
If it is rooted you can delete almost anything you want.
?
drastic00 said:
If it is rooted you can delete almost anything you want.
Click to expand...
Click to collapse
I don't quite follow ? I don't need to delete anything. I'm trying to flash the phone to an updated version of android. I have a UK orange branded p920 3D but it's on froyo 2.2.2 and won't update any further.
I thought you were wanting to delete bloatware. If you want ICS you can try my tutorial
http://forum.xda-developers.com/showthread.php?p=39269819
flash
drastic00 said:
I thought you were wanting to delete bloatware. If you want ICS you can try my tutorial
http://forum.xda-developers.com/showthread.php?p=39269819
Click to expand...
Click to collapse
Funnily enough i tried your method first. The flashtool kept asking for an id and password so i could not continue. Where do i find the id and password ? that was with flashtool 1.1 running on win 7
Copy the indicated file over the original as instructed or use 1.2 if you want. You also have to run the installer before using it...It might be a good idea to run it in xp sp3 compatibility mode.
dll
The link for downloading the p920 .dll file is broken. Is it available anywhere else ?
Thanks for telling me, I'll repost it...
In the mean time you could try this. It's not my link, though
http://d-h.st/Kmp
Hey, link is working. Dev Host must have been down for service.
U should first delete imei if the carrier is locked
Sent from my Nexus 4 using xda app-developers app
link
drastic00 said:
Thanks for telling me, I'll repost it...
In the mean time you could try this. It's not my link, though
http://d-h.st/Kmp
Hey, link is working. Dev Host must have been down for service.
Click to expand...
Click to collapse
Thanks drastic00. I've downloaded the link :good:
not working
I've now tried all methods and nothing works. The furthest i have got so is to hit the yellow start button on the flash tool, but the port does not become ready. I have followed all instructions to the letter.
Recheck step 1 details carefully. Be sure antivirus and Defender are off when downloading and decompressing. It won't start until drivers are installed correctly.
You should see the devices in device manager with no 'blinking' of the omap device, and LG CDMA USB SERIAL, on which you change the port number to 41. Then you are ready to flash.
That part is fiddly.
hello everyone,
i'm developing a game with unity and sometimes when i compile and inject the game on the phone it crashes and forces me to factory reset the phone through fastboot. i've done it like 3 times already with no problems.
but today it happened again and the phone just wouldnt recover, i've tried the fix that this video (youtube.com/watch?v=laU6NQ0LxR0) shows but it still does not boot.
I am able to enter fastboot and my computer recognizes the mobile phone so that's a great start :victory:
not sure what guide to follow since i'm not sure whether the problem is on the rom or something else.
can someone give me a tip on what fix should I try? cant really afford to lose my phone right now
it has (had) a stock rom 4.4.2 with stock bootloader, tho i tried to install the fix in the video i've said earlier and i'm not sure whether it changed the rom or not.
thanks
pewtel said:
hello everyone,
i'm developing a game with unity and sometimes when i compile and inject the game on the phone it crashes and forces me to factory reset the phone through fastboot. i've done it like 3 times already with no problems.
but today it happened again and the phone just wouldnt recover, i've tried the fix that this video (youtube.com/watch?v=laU6NQ0LxR0) shows but it still does not boot.
I am able to enter fastboot and my computer recognizes the mobile phone so that's a great start :victory:
not sure what guide to follow since i'm not sure whether the problem is on the rom or something else.
can someone give me a tip on what fix should I try? cant really afford to lose my phone right now
it has (had) a stock rom 4.4.2 with stock bootloader, tho i tried to install the fix in the video i've said earlier and i'm not sure whether it changed the rom or not.
thanks
Click to expand...
Click to collapse
What about following this guide?
Landrea said:
What about following this guide?
Click to expand...
Click to collapse
got stuck here :/
dropbox.com/s/d3s378e9pvxs0ab/Screenshot%202014-03-30%2023.17.12.png
pewtel said:
got stuck here :/
dropbox.com/s/d3s378e9pvxs0ab/Screenshot%202014-03-30%2023.17.12.png
Click to expand...
Click to collapse
Have you configured the drivers on your pc? The phone is recognized? It looks like the pc can't dialogate with it
Sent from my Commodore 64 using Videotel
Landrea said:
Have you configured the drivers on your pc? The phone is recognized? It looks like the pc can't dialogate with it
Sent from my Commodore 64 using Videotel
Click to expand...
Click to collapse
the phone is recognized as motorola adb interface, i even re-installed the drivers. now trying a different rom but i'm pretty sure the ROM is not the issue
*edit: yep, still waiting for device even with different ROM
modaco.com/topic/366786-how-to-flash-to-the-standard-uk-rom/
:victory: :victory: :victory:
this worked for me,
posting the link just in case someone encounters the same problem. thanks
pewtel said:
modaco.com/topic/366786-how-to-flash-to-the-standard-uk-rom/
:victory: :victory: :victory:
this worked for me,
posting the link just in case someone encounters the same problem. thanks
Click to expand...
Click to collapse
Thank you for sharing
/Data gets corrupted
Even, I had the same issue. I tried flashing ROMs through recovery but it gave me error that/data/media/0/ can't be mounted. The only way to get out I found was to full format /data and /storage (philz recovery) and then to push ROM. zip to/sdcard through adb and then to flash it through recovery.
Hope it helps someone.:angel: