Database Info

[ How-To ] Fix SD card not being detected & USB port not working

Decided to update the instructions for this fix.
Thx to sruon for the fix
Original instructions pulled from IEFtm's post @ Modaco
These fixes require the Android SDK and very basic ADB knowledge. You can copy and paste for most.
Make sure in device manager the driver for fastboot is installed (Win 7 downloads them automatically)
For USB fix
Download the flash_image & mtd-eng.img attached, unzip them and put them on the SD card before starting
SD Card Fix
Press & hold vol down and power on the phone
Select fastboot by pressing the power button
ADB commands
fastboot oem enableqxdm 0
fastboot reboot
That should fix your SD card not being detected.
USB Fix * Root REQUIRED *
Update - Some have reported that updating the radio fixes this, so if this guide doesn't work, try that
Run from a terminal emulator in Android since ADB won't work if the USB port is not working
Terminal emulator & ADB commands
su
cat /sdcard/flash_image > /data/flash_image
cat /sdcard/mtd-eng.img > /data/mtd-eng.img
chmod 755 /data/flash_image
/data/flash_image misc /data/mtd-eng.img
reboot
And that should fix the USB issue

factory reset?

That was the first thing I tried

Can you pull the battery and try a different sd card? Maybe reformatting (full) the card may help. You could always restore using the base sprint rom and try rooting again

This is probably the same thing known as "USB Bricks" for HTC Desires... It has been untested on EVO 4G but here is a topic that explains it for HTC Desire.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
It should be the same mechanics so... I have good hope for you.

did you try pulling the battery and trying the same process? I dont think you bricked it, seems like something else is going on. Did you remove the SD card while it was running?

Btw to reenable SD Card and ****s go into fastboot and type
fastboot oem enableqxdm 0
fastboot reboot

You tried hard resetting already?
Turn the power off.
If your HTC EVO 4G is frozen, pull the battery out and reinsert it
Hold the Volume Down button
Press and release the Power button
You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
Select Clear Storage by pressing the Volume Down button
Press and release the Power button
Now simply confirm your decision: Volume Up for YES and Volume Down for NO
If you selected YES, all data including third-party applications will be deleted from the HTC EVO 4G. Once the wipe is complete, the phone will reboot to its factory fresh state.

sruon said:
Btw to reenable SD Card and ****s go into fastboot and type
fastboot oem enableqxdm 0
fastboot reboot
Click to expand...
Click to collapse
This did let Android recognize the SD card, so thanks
sruon said:
This is probably the same thing known as "USB Bricks" for HTC Desires... It has been untested on EVO 4G but here is a topic that explains it for HTC Desire.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
It should be the same mechanics so... I have good hope for you.
Click to expand...
Click to collapse
Hopefully this fixes the USB issue, so I'll report back shortly
West650 said:
You tried hard resetting already?
Click to expand...
Click to collapse
Wiping/Hard reset didn't fix it

If it works... make sure this get stickied and ****s

I'll think I'll wait on rooting my Evo when I get it. I don't want to get into any problems haha.

sruon said:
If it works... make sure this get stickied and ****s
Click to expand...
Click to collapse
Actually it did fix it, I have the SD card & USB function back, so I'll update the first post with the instructions
So thanks a lot for that sruon, I owe you one now

No problem!

Ok updated the original post with the instructions cause I know I'm not going to be the only one with this problem

Thanks for this mate. Worked like a charm... even with your files, I didn't need to muck around with the generator or a hex editor. I will tell you this tho, I dont ever wanna do that again. 10 minutes to type 5 command lines in a shell on an Evo sucks hard.

Calkulin said:
Ok updated the original post with the instructions cause I know I'm not going to be the only one with this problem
Click to expand...
Click to collapse
calkulin good to see you messin around already, you dont waste any time! any idea what caused this issue for you or how to avoid/prevent it?

joeykrim said:
calkulin good to see you messin around already, you dont waste any time! any idea what caused this issue for you or how to avoid/prevent it?
Click to expand...
Click to collapse
+1, i used many of his winmo roms. cant wait to see what he does with android

Darth Pooh said:
Thanks for this mate. Worked like a charm... even with your files, I didn't need to muck around with the generator or a hex editor. I will tell you this tho, I dont ever wanna do that again. 10 minutes to type 5 command lines in a shell on an Evo sucks hard.
Click to expand...
Click to collapse
Glad I could help but be sure to thank sruon as he is the one that posted the link
joeykrim said:
calkulin good to see you messin around already, you dont waste any time! any idea what caused this issue for you or how to avoid/prevent it?
Click to expand...
Click to collapse
I don't know what exactly caused it, I don't remember exactly what I did right before the restore failed but I know I was working on de-odexing the system and since 5pm was coming around, I decide to restore and it failed. So I really don't know if it was the failing of the restore or something else(had flashed the Froyo ROM about a hour before too).
dav1boy said:
+1, i used many of his winmo roms. cant wait to see what he does with android
Click to expand...
Click to collapse
I'm already working on something don't worry But I need to finish my v1.6 ROM for the Moment first

sorry calkulin, me and you go way back, i can't wait for you to start building roms for this bad boy. unfortunately the same thing happened to me, i think my friend broke it when i asked him to pull my sd card out, anyways after i took it out it never read another sd card again. i had to get my evo exchanged yesterday, so the 1st day i didn't even get to play with it.

Nice to see you p-slim, buy yeah I can see how someone can damage the SD card slot, it definitely is a pain to remove and insert a card, especially if you have short finger nails. But don't worry, mine only lasted 3 hours before I "thought" I had killed it, so your not alone

[SPLASH] new custom splash screens

So I am extremely new to the android and started off with an EVO and have been messing with mine non stop ever since. I decided to make some splash screens that had nothing to do with EVO or HTC or droid simply because I wanted something different and thought I would share them. Here is how to use them:
1) download the rgb565 image you would like
2) put the image into your sdk tools folder
3) shut down your phone and power it back up holding the volume down button
4) hit the power button once to go into fastboot
5) open a cmd window and type the following: fastboot flash splash1 imagename.rgb565
6) reboot your phone and enjoy!
Since I am unable to post links yet on the site atoz350 will be posting them up for me shortly.

Here are two more since I could only upload 8

Here you guys go, these are awesome....
Death: http://www.megaupload.com/?d=Z7N8PLIS
Event Horizon: http://www.megaupload.com/?d=5YF4QJYN
Fracture: http://www.megaupload.com/?d=Q7PXGMUI
Fracture 2: http://www.megaupload.com/?d=GEYGGCM7
FRWave: http://www.megaupload.com/?d=34RK8VP0
Nail Spider: http://www.megaupload.com/?d=2JMHYE7E
Osiris: http://www.megaupload.com/?d=2JMHYE7E
Poseidon: http://www.megaupload.com/?d=2JMHYE7E
Solarium: http://www.megaupload.com/?d=2JMHYE7E
Rocket Star: http://www.megaupload.com/?d=2JMHYE7E

Xavier00 said:
So I am extremely new to the android and started off with an EVO and have been messing with mine non stop ever since. I decided to make some splash screens that had nothing to do with EVO or HTC or droid simply because I wanted something different and thought I would share them. Here is how to use them:
1) download the rgb565 image you would like
2) put the image into your sdk tools folder
3) shut down your phone and power it back up holding the volume down button
4) hit the power button once to go into fastboot
5) open a cmd window and type the following: fastboot flash splash1 imagename.rgb565
6) reboot your phone and enjoy!
Since I am unable to post links yet on the site atoz350 will be posting them up for me shortly.
Click to expand...
Click to collapse
Is there a better way to flash these splash screen on here like using clock recovery
Sent from my PC36100 using Tapatalk

ewilson said:
Is there a better way to flash these splash screen on here like using clock recovery
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Unfortunately there is not a better way because you need to flash these in fastboot rather than in recovery mode. Although I wish there was that way I could add it to themes

Xavier00 said:
Unfortunately there is not a better way because you need to flash these in fastboot rather than in recovery mode. Although I wish there was that way I could add it to themes
Click to expand...
Click to collapse
What about placing the file on SD card and such through terminal on phone will that work
Sent from my PC36100 using Tapatalk

ewilson said:
What about placing the file on SD card and such through terminal on phone will that work
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
I have not tried to do that but from what I know so far you cant because there is no way to access it from the fastboot menu the easiest way is to use the adb to push it

[Boot Splash] "Inspired" by Light (w/Preview Pic)

I hope you enjoy this. These are pretty easy for me to make, so if you have a request... ... At any rate, "thank" me if you like it and use it. And if you screw anything up and your phone explodes, or breaks, or Smurfs attack from outer space, it's your fault. you have been warned!
How to flash:
1. Unzip the file so you have "splash1.img" and place this file in your "tools" folder of your SDK package.
2. Boot into your bootloader (fastboot mode)
3. From the command prompt: Change directories to your SDK "Tools" folder then type:
Code:
fastboot flash splash1 splash1.img
4. Reboot and enjoy

Got a preview pic by chance. Also check your pm's.

Preview pic should be up... I see it on my end?? It's HUGE. lol..
Anyone else not see the pic?
EDIT: Just checked the OP on a different PC, and pic WAS NOT showing up. This has now been corrected. ...

How do we revert to default, if desired?

smalis said:
How do we revert to default, if desired?
Click to expand...
Click to collapse
You will have to re-flash the default boot splash. Using the same method as mentioned.
Note: I will update the OP with the stock Boot splash as well, once I receive my phone.

OK, stupid question time (my specialty) I get into the Inspire bootloader OK, but then how do I call up or otherwise access "command prompt"? It's not like I have a menu button I can push, and command prompt doesn't seem to be one of the options displayed on the screen. I may be overlooking the obvious, and if so I apologize.

Ultra Droid said:
OK, stupid question time (my specialty) I get into the Inspire bootloader OK, but then how do I call up or otherwise access "command prompt"? It's not like I have a menu button I can push, and command prompt doesn't seem to be one of the options displayed on the screen. I may be overlooking the obvious, and if so I apologize.
Click to expand...
Click to collapse
What T.A.G. was referring to was using the command prompt in Windows. This would also be used in conjunction with having the Android SDK installed in Windows.

Wolf_2 said:
What T.A.G. was referring to was using the command prompt in Windows. This would also be used in conjunction with having the Android SDK installed in Windows.
Click to expand...
Click to collapse
OK, *now* I understand! Told you, dumb questions are my specialty!
Thanks much!
-Mike

The only dumb questions are those that are not asked.
Sent from my Inspire 4G using XDA Premium App.

tribalartgod-
Awesome job!

kimtyson said:
tribalartgod-
Awesome job!
Click to expand...
Click to collapse
Thanks. I've been slacking on a lot of stuff here lately. Bout to go full force on this stuff again soon. (Job and life away from Android takes priority.) Stay tuned.

can this be flashed through cwr?

stryfe2010 said:
can this be flashed through cwr?
Click to expand...
Click to collapse
I have not tried it. So as of right now, the official answer is NO. If you decide to try anyway, it's at your own risk. I'm not responsible if your phone becomes a pretty brick.

How To Turn S-Off, Install MoDaCo Clockworkmod Recovery, and Install a Rom For Dummie

OK, I've read a lot of comments about people having trouble installing MoDaCo clockworkmod, or even turning their devices S-off. But my guide is going to go step though step of how to turn your device into a lean, mean killing machine. It took me days to accomplish this when i first got my device, hopefully this will take you under 30 minutes! I'm a junior member, i know, so cut me some slack, PLEASE.
WARNING AND DISCLAIMER: I AM NOT RESPONIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE. FLASH AT YOUR OWN RISK, EVEN IF IT FALLS APART IN YOUR HAND, OR BECOMES GODLY FAST!
1. The first thing we need to do is turn S-OFF for your mytouch 4g slide. It is probably the easiest thing to do, other then installing a rom on your device.
a. You will need to download the usb drivers for your phone, DON'T SKIP THIS STEP, or you'll wonder why your phone isn't discovered by the software. You can find those drivers at this website right here:
http://www.htc.com/managed-assets/support/software/htc-sync/setup_3.0.5579.exe
After you have that software installed, plug in your phone, and give it a couple minutes to install all the correct drivers for your device, then make sure you go to the bottom right of the computer and exit out of that software, it can't be running when your trying to S-OFF your device. Now I dont think you have to have the fastboot drivers installed either, but why not, lets go ahead and download those files and get those installed too.
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
After you have those installed, its now time to move on.
b. Now thanks to unrevoked and AlphaRev and their team, you will go to their site at http://revolutionary.io/ and you will scroll down and click on Download for Windows (If you can take everything I'm saying and do the linux version, right on!) at that moment a download box will appear, but do not download those files, download the files from this website http://www.megaupload.com/?d=BP2E3ZQ3 .But you will need to enter some information in the box below after you click on windows download, just remember, you don't need those files. Your operating system, device, HBOOT version, and serial number. Your HBOOT version can be found by taking your device, going to apps, settings, power, and uncheck fast boot, then power it off, i always power it off and then pull the battery out, makes me feel safer...and soon as its off, holding the volume down button, camera button, and power button all at the same time. You'll then see a screen with the android bots on the bottom are rolling on skateboards. At the top should be your HBOOT version, and there is only one option on the site, so hopefully your in luck! For your serial number,take the battery out from this screen, don't push any buttons, and on the sticker under the battery, your serial number will be there starting with HT--- or power your device back on, then go to apps, settings, about phone, phone identity, and wala, your device serial number. After you enter all that information into the site, it will generate you a beta key, YOU NEED THAT IN ORDER TO S-OFF AND ROOT YOUR DEVICE!! So write it down somewhere, copy and paste in word, do what you do
c. Now we have everything downloaded, we have our beta key, its time to get to work!
d. The file you downloaded from megaupload, "MT4GS-ADB-WINDOWS" you need to extract that file into a folder on your desktop. Make sure you open the folder mt4gs-adb, and extract the files out of the folder, so you should have 12 items in your folder on the desktop, not just a folder in a folder! I created a folder called "root mt4gs". You want all the files in one location. After there all extracted, open your folder on the desktop. On your phone, go to apps, settings, applications, development, and click on usb debugging and make sure the check mark is blue on the right. Now plug your phone into the computer.
Now in your "root mt4gs" folder, double click on revolutionary. At that moment it should ask you for that beta key i told you to save. Go ahead and enter that now (its case sensitive). Let the software run for a couple minutes....
Now after it says S-Off, your halfway there!! Your HBOOT will now say 1.44.1107. That way you know its done! It will ask you to install clockwork recovery mod, say NOOOO, it has hella problems. It gave me problems when i said yes the first time, i'll show you another way.
e. At this moment, we're going to install clockwork recovery v4.0.0.9, thanks to Paul O'Brien/MoDaCo, the gods lol. First, turn your device off/pull the battery out, thats what i do. Then hold volume down button, camera button, and power button at the same time. It should show you the skateboarding androids, and at the top it should say -Revolutionary- in purple. If it doesn't, don't continue, retry all steps or message me. Then plug your phone into the computer, and using the power button as the selection button, push the power button as your highlighted over FASTBOOT. It should say FASTBOOT USB at the top in red now.
Now believe it or not you already have the file you need in your "root mt4gs" folder. Your now going highlight all the files in your "root mt4gs" folder to the root of your hard drive. Click on My computer, double click on your c: drive, and paste those files right on there, do not copy the folder, or put these files in a folder!! Now your going open a command prompt. {Hold the windows key and tap r}. Then type "cmd" without the parenthesis and it should open up a black box.
Now type cd\
Your command prompt should now just say c:\> thats what you want it to say
Now your going to type adb.exe
You should see a whole bunch of words flash on the command prompt, the last couple words should say "bug tags are printed." That means your right on track.
From here, you are going to type in fastboot devices
it should have the serial number of your device and the word fastboot right next to it!
Now, here comes the tricky part that i got stuck at, but i know you can do it! Now this will work if you put the files exactly where i told you to put them. you now will type fastboot flash recovery c:\clockworkmod.4.0.0.9.img
it should say " sending 'recovery'
okay
writing recovery'
okay
finished. total time: (mine is 10.400s)
Now to make sure it's intalled, on your phone, click power button and you should now see fastboot, recovery, factory reset, simlock, and imagecrc as options, use your volume button to go down to recovery, and click power button.
You should now see clockworkmod recovery 4.0.0.9.
f. Now lets put superuser on your device so you can be free!
click on this file and download it, DO NOT EXTRACT IT
http://downloads.androidsu.com/superuser/su-2.3.6.3-efgh-signed.zip
Now after you have downoaded that file, on your phone, use your trackpad, and scroll down to "mounts and storage"
then scroll down to mount usb storage. now you should be able to put files on your sd card, make sure you put it on the root of your sd card, not in a folder, it doesn't matter, but i prefer it!.
Now unmount on your phone by clicking the option, click go back, and then scroll down to "install zip from sdcard" and click on it, then click "choose zip from sdcard". Find that file we just put on there "su-2.3.6.3-efgh-signed.zip", and click on it, then click yes. Now click on go back, and click reboot system now!
Now if you want to stay stock, your done, your rooted, so now just install root checker, and busybox, and your good to go, if you want to do some roms, keep on reading.
Now you cross your fingers, and grab a soda, because we're 75% done!
g. Now is the easy part, all you do now is download the roms from other developers, copy them to your sdcard, then turn off the phone, hold volume down, camera and power button, go into recovery with using vol up and down buttons as the selector, and the power button to confirm your option. As you enter clockwork mod, you can then go follow the directions of the developer as to wipe certain sections, and how to install there roms/patches. YOUR DONE
If you have any questions, please let me know, also I didn't make ANY of this software, this guide just has every link to get you everything you need at one spot. I also have the original file to make your phone completely stock, so if you need that, let me know and I'll upload that and send the link out.
If you want to donate to me, donate to all the other og's first!
Thanks to
jdmarko
unrevoked
alpharev
paulobrien
MoDaCo
and if I forgot you, let me know. thanks!

Now this is how you give a tutorial!!! If i had some extra cash i would totally donate bro! I was trying to install 4.0.0.9 for two days from the dude that made its site and his directions were not thorough enough. Thanks dude.

Oh dude no worries, a thanks is just as good. I appreciate it, it took me days, so I'm happy I could help brotha!
Sent from my MyTouch 4G Slide using xda premium

Going to try! :-D fingercross tor me!

Thank you very much, very good write up.

Geko90 said:
Going to try! :-D fingercross tor me!
Click to expand...
Click to collapse
Fingers are crossed, the tutorial has proven effective so far, so hope all goes well, tell me how it goes!

poken1151 said:
Thank you very much, very good write up.
Click to expand...
Click to collapse
Thanks! I'm assuming it worked then?!

Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???

phil0sophic said:
Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???
Click to expand...
Click to collapse
Ok let's figure this out.. on step f, you did unmount your sd card, right? I haven't dealt with this problem before so if I ask a stupid question, I'm just trying to solve this. Also you don't need to wipe anything to install superuser, so that could be the problem also, so reboot ur fone, and let's try step f again! Keep me updated please!

phil0sophic said:
Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???
Click to expand...
Click to collapse
It took a lot of us several attempts to flash the superuser zip. The 4.0.0.8 recovery isn't the greatest. Keep trying until it installs and you get root. Then upgrade to the modaco 4.0.0.9 recovery right away. It's not perfect either but it fixes a LOT of the issues known with 4.0.0.8.
And a comment to the OP, this is an incredibly helpful walkthrough! If only people would actually search and find this before posting new threads like "how do i root" and all that crap.
Thank you.

Great job on this and thanks for your work. I wish I would have had this tutorial when I did mine.
Sent via my talk enabled Galaxy Tab using XDA premium.

Techlvr said:
Great job on this and thanks for your work. I wish I would have had this tutorial when I did mine.
Sent via my talk enabled Galaxy Tab using XDA premium.
Click to expand...
Click to collapse
Thanks, I had a lot of trouble doing mine the first time, and I went back to stock, typed this and gave my wife my phone and she went step by step and completed it. So it can't be that hard!

Does this add an app to reboot from as the standard cwm does?

phil0sophic said:
Does this add an app to reboot from as the standard cwm does?
Click to expand...
Click to collapse
An app to reboot from? Not understanding the question throughly... In this cwm, it has the option to reboot system as every other cwm that I've used has. But an app... I do not have an app though...hope I answered your question!

numbaoneforeva said:
An app to reboot from? Not understanding the question throughly... In this cwm, it has the option to reboot system as every other cwm that I've used has. But an app... I do not have an app though...hope I answered your question!
Click to expand...
Click to collapse
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.

phil0sophic said:
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.
Click to expand...
Click to collapse
Oh, now i understand. No there isn't. I don't have one at all, as soon as I installed clockworkrecovery, and superuser, I flashed undeads rom on there. And I've been reading that superuser is being buggy when installing it on this phone through cwm...I'll look into that tonight, see if i can find the root cause.

Thanks...This is my wifes phone, she just upgraded from a CLIQ (one of the two people that loved blur)she likes my MT4G and wanted a KBD so here we are....
I want to change the lock ring so need root for the wonderful majic you dev's do....

phil0sophic said:
Thanks...This is my wifes phone, she just upgraded from a CLIQ (one of the two people that loved blur)she likes my MT4G and wanted a KBD so here we are....
I want to change the lock ring so need root for the wonderful majic you dev's do....
Click to expand...
Click to collapse
Well your at the right forum to get you started. And thanks! This is my first post so I'm trying!
Sent from my MyTouch 4G Slide using xda premium

phil0sophic said:
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.
Click to expand...
Click to collapse
You probably just have to download ROM Manager from the market, I think that's what you're referring to. There isn't a whole lot of support for our device in ROM manager right now, however, and I haven't checked to see if the "reboot into recovery" works. Go into settings > power > and uncheck fastboot. Then, shut down your phone, wait 10 seconds, hold down the volume down button and turn your phone back on. That'll get you into recovery. Did you get superuser to install? Are you rooted?

Mine won't switch from "revolutionary" in purple at the top to "fastboot" at the top.
It says fastboot USB about 6 lines down, but that's it.
When I type "fastboot devices" it errors and says:
'fastboot' is not recognized as an internal or external command, operable program or batch file.
anyone know what's up?

A problem with ADB...

I tried installing the 1.4.3 ADB/Fastboot program on all three of my computers... It transfers 0 files and flashes some error message from CMD use... Anyone know why Win 7 pro shouldn't take the Install..?? I even used ADMIN to do it... Nothing... I'd love to just see if my new Chinese tablet has a bootloader or not...
Anyone..?

lentmain said:
I tried installing the 1.4.3 ADB/Fastboot program on all three of my computers... It transfers 0 files and flashes some error message from CMD use... Anyone know why Win 7 pro shouldn't take the Install..?? I even used ADMIN to do it... Nothing... I'd love to just see if my new Chinese tablet has a bootloader or not...
Anyone..?
Click to expand...
Click to collapse
How are you installing it? With a program or something? Here I'll just share mine with you.
https://drive.google.com/file/d/0B3XczzpnAnvwdlFvYURXMl8tbUk/view?usp=drivesdk
This has more than adb and fastboot, but all you have to do is extract all of these files into a folder somewhere. Then open the folder, hold SHIFT, and right click. Then select Open CMD Window Here. Then you're all set. (The apktool and smali/baksmali stuff are different tools for editing .apk files. You probably won't need them, but if you do.... already got 'em. Also, the instructions text file is for apktool. I use the same zip to help people edit apps.)
Sent from my KYOCERA-C6745 using Tapatalk

RealWelder said:
How are you installing it? With a program or something? Here I'll just share mine with you.
https://drive.google.com/file/d/0B3XczzpnAnvwdlFvYURXMl8tbUk/view?usp=drivesdk
This has more than adb and fastboot, but all you have to do is extract all of these files into a folder somewhere. Then open the folder, hold SHIFT, and right click. Then select Open CMD Window Here. Then you're all set. (The apktool and smali/baksmali stuff are different tools for editing .apk files. You probably won't need them, but if you do.... already got 'em. Also, the instructions text file is for apktool. I use the same zip to help people edit apps.)
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
I used three different exe programs... the xda one from the forum... And two others from the internet... i checked each with my norton..., then disabl;ed the anti-virus..., then it loaded fine... wouldn't deposit the four files it was supposed to have.... Thanks for your files... I'll try it next... thanks.... lentmain

RealWelder said:
How are you installing it? With a program or something? Here I'll just share mine with you.
https://drive.google.com/file/d/0B3XczzpnAnvwdlFvYURXMl8tbUk/view?usp=drivesdk
This has more than adb and fastboot, but all you have to do is extract all of these files into a folder somewhere. Then open the folder, hold SHIFT, and right click. Then select Open CMD Window Here. Then you're all set. (The apktool and smali/baksmali stuff are different tools for editing .apk files. You probably won't need them, but if you do.... already got 'em. Also, the instructions text file is for apktool. I use the same zip to help people edit apps.)
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
Real welder..., May I ask you a question..? Can you tell me how to find out if I have a bootloader and how to find out... I thank you again for your software... It worked wonders.... But the tablet still refuses to tell me more than what was on the scatter txt page...
I started reading the Beginners pages.., as recommended by another guy.... I downloaded the SDK BIG program... Along with the other programs that help it out...
I'm still not sure how to hook up my Chinese tablet to the SDK program and see what is inside...
Thanks ahead of time...,
lentmain
Do you know of a helper page to show me what to do..? Any help is greatly appreciated.....

It varies from device to device, some companies have disabled fastboot. Typically though, when powering it on if you hold vol+ it will go to recovery and vol- will go to bootloader, but not always. On a Coolpad device I have, I had to boot to recovery then it'll say No Command. Hold power and tap vol+ to bring up the menu. Then one of the menu options was reboot to bootloader.
Sent from my KYOCERA-C6745 using Tapatalk

RealWelder said:
It varies from device to device, some companies have disabled fastboot. Typically though, when powering it on if you hold vol+ it will go to recovery and vol- will go to bootloader, but not always. On a Coolpad device I have, I had to boot to recovery then it'll say No Command. Hold power and tap vol+ to bring up the menu. Then one of the menu options was reboot to bootloader.
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
Tell me..., if you know..., I just Rooted my Tablet.... Does that mean it doesn't have a locked bootloader..???? I still can't find anyone who is working on these Chinese MTK tablets...
Thanks,
lentmain

lentmain said:
Tell me..., if you know..., I just Rooted my Tablet.... Does that mean it doesn't have a locked bootloader..???? I still can't find anyone who is working on these Chinese MTK tablets...
Thanks,
lentmain
Click to expand...
Click to collapse
Not necessarily, what version of Android is it running? On KK you can root even if the bootloader is locked. Anything newer than that though, would most likely have to be unlocked first.
Sent from my KYOCERA-C6745 using Tapatalk

RealWelder said:
Not necessarily, what version of Android is it running? On KK you can root even if the bootloader is locked. Anything newer than that though, would most likely have to be unlocked first.
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
It says it's running 6.0 Marshmallow... I can see a eMMc partition on the scatter txt..., I can see lots of flashing write up but I have tried two and they both failed...
Oh well...

lentmain said:
It says it's running 6.0 Marshmallow... I can see a eMMc partition on the scatter txt..., I can see lots of flashing write up but I have tried two and they both failed...
Oh well...
Click to expand...
Click to collapse
Have you tried adb reboot-bootloader command?
Sent from my KYOCERA-C6745 using Tapatalk

RealWelder said:
Have you tried adb reboot-bootloader command?
Sent from my KYOCERA-C6745 using Tapatalk
Click to expand...
Click to collapse
It makes the tablet screen turn black and returns : * daemon not running; starting now at tcp 5037
* daemon started successfully
I'll put it in bootloader then try it again.......
lentmain

lentmain said:
It makes the tablet screen turn black and returns : * daemon not running; starting now at tcp 5037
* daemon started successfully
I'll put it in bootloader then try it again.......
lentmain
Click to expand...
Click to collapse
Tried it again with the tablet in BOOTLOADER mode...
When you push volup then power..., it goes intoa three way choice... Recovery, Bootloader ans Normal... Recovery seems to put you into the routine recovery you see on cell phone... sideload in ADB, and such...
Fastbooat seems to accept some ADB and fastboot commands...( I don't know them all..)
normal does nothing... I have to hit reset pinholr on all three to get out of them... escape doesn't seem to work...