I have an issue with my cooked ROMs for my Nike - I have done plenty of searching and have even replaced most (if not all) of my kitchen, but the issue still prevails.
Internet Sharing opens and connects without an issue - the PC gets a network card installed (remote ndis...etc), but I can't get it to receive an IP address from the phone, so therefore I can't use the internet sharing.
anyone got any ideas? it does it on COM2 and COM5 builds. I have recmodded the internet sharing folder, but this still has no effect. I have added a copy of the internet sharing folder so that it is installed last in the build and still nothing.
Thanks in advance
DT
So nobody else has this issue??
Tried just setting an IP for the pc on the pc?
Probably something like 192.168.0.x
tried that - wasn't sure of the DNS settings though - so can't browse, etc.
There must be a simple solution if nobody else is experiencing this - just wish I knew what it was.
thanks
DT
I would try testing the app with a different computer, i had a really stubborn Toshiba laptop (on winXP) that never obtained an IP address while it worked perfectly on my ubuntu laptop and win7 desktop.
If nothing prevails, you could try using the more advanced ICS Control or even WMWifiRouter
I had this issue for a long time and I don't know why Internet Sharing is connected with Advanced Network functionalities on my device and if it isn't active, the No IP situation pops up... take a look there...
I have the same problem on my Jade, so I use WMWIFIRouter, DHCP works prefecty...[/I]
Solved
The "Remote-NDIS Host" network adapter was not assigned an IP address, so I cooked in the address 192.168.0.1 and it is now working. Not sure why it wasn't there to begin with, but hey, it now works and I am a happy camper
Here is the reg entry that I added to my kitchen for anyone else who may have the same problem...
Code:
[HKEY_LOCAL_MACHINE\Comm\RNDISFN1\Parms\TcpIp]
"Subnetmask"=hex(7):32,00,35,00,35,00,2e,00,32,00,35,00,35,00,2e,00,32,00,35,00,\
35,00,2e,00,30,00,00,00,00,00
"IpAddress"=hex(7):31,00,39,00,32,00,2e,00,31,00,36,00,38,00,2e,00,30,00,2e,00,\
31,00,00,00,00,00
DT
glad you got the solution to your problem.
on that note thread closed
Related
Hello all:
(first of all, I apologize for the double post, I erred and replied to a thread in the diamond forum)
I'm having problems getting my remote desktop to work. Been trying to connect since I picked up my Fuze on the 11th.
I have three different computers that I can successfully administer via my desktop. I've tried using 3G to connect, no success. I've tried using Wi-fi to connect, no success. I've used local computer names, IP addresses, properly forwarded ports --
It has to be a setting I'm missing on the phone. Any ideas? TIA
What version of Windows are you trying to connect to? Do you have a Firewall? And have you done the port forwarding on the router?
But the only options you need is Computer: IP Address and the user name and password. Use a Domain if you are connecting to PCs on a domain. Also when I logged in not using 16bit color under options the PC was almost unusable.
My attempts
The things I have tried since my post:
1) attempting to connect to Windows Server 2003 machine, non-local. Used IP address with port, same IPort that works from my desktop. Left username/password blank -- filled them both in -- left the domain name blank -- filled it in. All failed. Get the error message with three possible causes listed. Connected to my home network via wifi, data connection disabled (sometimes causes problems with my internet browsing if they're both enabled)
2) attempted to connect to a local machine, running XP Pro. Again, tried all possible combinations of username/password completeness, no success. Using Wifi
My local router does have a firewall, and the remote router does as well. I can successfully navigate those using my desktop (or laptop, for that matter)
GTO: I appreciate the quick reply...thank you.
3daysaside said:
The things I have tried since my post:
1) attempting to connect to Windows Server 2003 machine, non-local. Used IP address with port, same IPort that works from my desktop. Left username/password blank -- filled them both in -- left the domain name blank -- filled it in. All failed. Get the error message with three possible causes listed. Connected to my home network via wifi, data connection disabled (sometimes causes problems with my internet browsing if they're both enabled)
2) attempted to connect to a local machine, running XP Pro. Again, tried all possible combinations of username/password completeness, no success. Using Wifi
My local router does have a firewall, and the remote router does as well. I can successfully navigate those using my desktop (or laptop, for that matter)
GTO: I appreciate the quick reply...thank you.
Click to expand...
Click to collapse
Okay its been awhile since I used 2k3 sever. Using 2k8 lately but are you trying to use Terminal Server? and if your using 2k3 and you have ISA enabled I know it can be a pain to do port forwarding with it. But let me get this stright. You have no issues using XPs Remote Desktop to log into the server machines Terminal Server/Remote Desktop? Here is an idea. Whatever port your running Terminal Server/Remote Desktop type the IP Address with a : and port. IE 192.168.0.1:3000
Also if you would like you can PM the IP address of one of the Machines and I will try from my phone that I know is working with my machine. I am pretty sure you don't need to end a user name or password and it will bring me up to the login screen or you can make a temp account. On also on the Win2k3 machine I am pretty sure you have to add the option to login with Terminal Server even if its the Administrator account.
I am able to connect to my local XP machine over wifi using the ip addy/no port. Hostname (DNS) connection attempt failed, though. My 2k3 server's power supply died or I would test that for you.
No special router config (port fwd) for my device had been done.
The fact that you can't get to your local box on your local network is where I'd start.
Local Network Issues
Thanks again to you both...
I think that might be the problem -- the local network setup. I can connect via wifi, and browse the web. However, I can't install a network printer using the WinMo app that's included, and I can't seem get to the local PC even when I use the local IP instead of the DNS name. I did check, I'm being issued an IP address by the router (obviously), but still no dice on anything relating to network based traffic.
Is there a way to ping using WinMo? I'd like to be able to use that start.
Cont..
Also, I've noticed that I don't get the same error each time. Depending on which machine I'm trying to connect to, it'll give me an error with either two or three options as to why it's not working. Trying to figure out what that's telling me.
As far as Terminal Services are concerned, when I connect from the desktop, I believe I'm using Remote Desktop there (honestly, I haven't been paying attention -- I just use whatever pops up when I type 'mstsc' from the Run dialog, lol), and I can connect to the 2003 server. However, I can't play with this anymore today, because apparently the server is down, and I won't be able to get to it till Monday.
I think I'm going to go play with the ATT proxy and see if that changes anything. I think mine is still enabled because I read that it might help with the GPS problems...
I have found some freeware app... pocketping 1.6 and microsoft has a network tool offering which I am not sure will work on WM6. I have no exp. with either tool on WM.
Can you get to your http/https router mgmt interface from the device? Check your router's client table? Does your router have any logging capabilities?
Sorry, more questions than answers.
Router
I am able to "dial" into the router from my phone -- it shows the HTCP4600 in the clients table with an IP of 192.168.2.108 ... all good.
My logging on the router was disabled, but now it is enabled. What should I be looking for?
I think i'll try the pocketping...
Now make sure inside of the router then you have all the correct ports forwarded.
It should be port 3999 to 3999 On UDP and TCP and then your PC ip behind the firewall.
Pocketping, JETCET Print 5, and success
Here's the update:
Discovered that by disabling the AT&T proxy on the Fuze, I was finally able to connect to my network printer -- the Fuze doesn't have the drivers for my printer, but that's another thread.
So I was able to make my first IN-Network contact. Installed pocketping 1.6, and it's a very useful tool. I'm able to successfully ping the computers on my network now that the proxy is disabled -- an voila...I can also connect to my laptop on my own network! The main trick was to use the network IP address and not the DNS name.
Thanks to both of you who helped out.
Hi,
I just bought myself a new webbook (a CnMbook) and want to use my TouchPRO as a modem so I can surf the net at work.
I've been routing round the internet to find an answer - which I have done http://ubuntuforums.org/showthread.php?p=6239582#post6239582 but my webbook doesn't have the option to get to terminal.
Can anyone else help?
Thanks
Simple solution, which I'm using is > http://www.walkinghotspot.com/
Thanks for your reply - but I already pay for unlimited internet with my phone contract, so I don't want to pay again.
Well, you could try other ways of getting to the terminal... without fixing that module, it won't let you get online via USB.
Otherwise, you can just use Bluetooth if your laptop has it, or the free version of WMWifiRouter, while plugging in to charge.
what is the latest free version of wmwifirouter? http://freewareppc.com/communication/wmwifirouter.shtml <- is that it?
walking hot spot is a trial, but even when it expires it still works
@ldrn - thanks for suggesting WMWifiRouter, that's a great app!
After an hour of messing about with it, I'm about 95% of the way there, but when my laptop tries to connect it says "invalid IP address"
Any ideas how to fix this?
GreenSaints said:
@ldrn - thanks for suggesting WMWifiRouter, that's a great app!
After an hour of messing about with it, I'm about 95% of the way there, but when my laptop tries to connect it says "invalid IP address"
Any ideas how to fix this?
Click to expand...
Click to collapse
Just had a quick look at the link for WifiRouter you posted. In the change log the author says: "- Made the use of DHCP Allocator disabled by default."
This would mean your Netbook basicly guessed an IP address when it's DHCP request failed. Look around for an option to enable the DHCP. I have no idea where it is, never used the app.
Good luck.
Alex is right (and so is Jack, I think) -- and just go to "Options", "Configuration", then "Use DHCP Allocator".
Glad I was able to help.
@Alex_w and ldrn
Thanks for your responses - however, I am still having issues.
I tried my Vista laptop to connect using WMWiFiRouter and it worked first time, however my little webbook can't get an IP address - whether the DHCP is ticked or not, or DNS.
I've now spent about 6 hours trying to work this out and it's annoying not to mention wasted a Sunday!
Are you using any type of encryption on the Ad-hoc connection? That's normaly my main problem when I work with WiFi on *nix. Just seems like the config tools aren't very polished TBH.
@Alex_w
Thanks for your reply - do you mean like WEP or Firewall?
Either/or - I have none enabled.
I found out that my webbook runs on "debian" - does that make a difference? I'm a total newbie when it comes to Linux
*bump*
No more answers?
Hmm... that is strange. I have had trouble connecting with wcid and WEP, but not with NetworkManager (and NetworkManager is usually the default.) Are you sure you are seeing the network name correctly and there is no encryption? A lot of versions of the NetworkManager fail to see Ad-hoc connections.
If that fails, I could walk you through how to *make* your laptop go to the terminal for the fix, but there would be a big risk of breaking something.
* Edit * Okay, this is pretty unslick and inefficient, but if you only use it for web browsing, the awesome Socks Proxy Server pchasco wrote works great for me on a machine without a fixed rndis module -- I am posting using it right now -- although it looks off on a VGA device like ours and the setup on the other end is a bit clunky.
Plug in your Touch pro and tell it to do activesync with internet sharing turned off, download that and run it on your Touch Pro -- leave the defaults and press "start proxy". Then on your linux laptop, go into firefox, type "about:config", and find network.proxy.socks_remote_dns and set it to true (you will only have to do this the first time.) Then in firefox, go to edit, preferences, advanced, network, settings (under connection) and write the IP address Socks Proxy has in its box near the top on your phone in under "SOCKS Host" -- leave the rest blank -- and the port Socks Proxy has as the port (should be 1080.) Make sure it is SOCKS v5 and press okay, and you should be good to browse.
You have to turn proxy mode off on firefox when you are on a normal connection, though. There are some extensions around to make it easier.
Another useful WindowsMobile-side free software I've found really handy for linux is Mocha's free FTP server -- you can use it to browse around on your phone as if you had activesync without telling it to pretend to be a disk.
@ldrn
Thanks for your detailed response and sorry for my late reply.
I'm going to try this tomorrow and will let you know the outcome.
Fingers crossed!
I am using Ubuntu 8.10 on my Thinkpad notebook and on my eee 900 ("easypeasy 1.0"). I had 2 months with internet sharing nd other connection problems until i changed the MTU to 1392 - that did it! I made a new entry "TouchPro" (instead of the "Auto eth2" it used to create by itself), put the correct MAc address and MTU in it - ready.
zh1975 said:
I am using Ubuntu 8.10 on my Thinkpad notebook and on my eee 900 ("easypeasy 1.0"). I had 2 months with internet sharing nd other connection problems until i changed the MTU to 1392 - that did it! I made a new entry "TouchPro" (instead of the "Auto eth2" it used to create by itself), put the correct MAc address and MTU in it - ready.
Click to expand...
Click to collapse
How were you able to change the MTU settings on your touch PRo? I am trying to tether w my xbox 360 and it keeps saying MTU fail!!!
Hello. I am having a Sony Ericsson Xperia X1 WM6.1 Device. Recently, I've tried internet sharing via USB and it doesn't seem to work. My idea is to be able to have internet connection on my phone via USB that connects to my main computer that has ADSL connection.
After pressing 'Connect' is successfully connects but any internet usage I've made is via my EDGE connection, not ADSL.
According to Windows Vista Internet Sharing Center, my phone's network access is 'Local only' as apposed to my normal LAN connection which is 'Local and Internet'.
I've searched for a solution and I came to this http://support.microsoft.com/kb/928233 but it still does not work.
Apart from the problem of Internet Sharing, my WMWifiRouter can't seem to work also.
As far as I know, WMWifiRouter will need to have Internet Sharing to work first, so it's normal that it is not working. However, I found a rather interesting message whenever I connect the 'USB to WiFi' mode. A pop up box with the tile 'Pocket PC Networking' will say ' cannot obtain a server assigned ip address. try again later or enter an ip address in network settings'.
Can anyone share with me the proper IP address for WMWifiRouter on my PC and on my WM device?
Anyway, just to describe the problem I'm facing when I'm using WMWifiRouter.
1. I connect 'USB to WiFi', everything seems to work fine, the status is ready.
2. I can see my own network name on my laptop.
3. I click on it, and the message shows connected.
4. Tried to access the internet but it won't work.
So, the main problem now is...
1. There's something wrong with Vista causing any device that wants Internet Sharing to only connect to 'Local'
2. There's something wrong with my IP configuration.
Thank you all very, very much in advance for helping me out.
unless chainfire beats you to it and posts the answer here.. you can PM him
Alright, thank you very much for your suggestion!
Hey folks,
I'm trying to setup dmz settings in wmwifirouter to no avail. I know where it is (in the advance menu) but when i check if the ports are forwarded properly they still are not. I'm trying to use utorrent, but it isn't opening the ports so i cannot see incoming connections and it downloads at around 10kbps. yesterday it was working a lot faster, around 100kbps. I don't know what happened, but i want to try and place my computer in the dmz. if anyone has some insight on the settings they used to get their pc to the dmz i'd really appreciate it.
I'm using stock alltel rom wm 6.1 and wmwifirouter 1.50
also is there a web interface i can connect to, sorta like when you want to config your linksys router you just type in the gateway ip. I've tried this, but it doesn't work, i might have done it wrong.
hello, i show on youtube my hd2 can remote desktop
but i try many time d, still cant not,
it pop up:
cannont connect. likely reasons are:
1. the remote computer is not set up for this.
2.reacher the maximum number of connections.
3.a network error occured while connecting.
i follow all the youtube teach, but still cannot
anyone pro can help, thank
i dont wan waste this function for my hd2...
thank a lot
follow this youtube oso cant
1.http://http://www.youtube.com/watch#playnext=1&playnext_from=TL&videos=c8vPemJbMLU&v=QFiDZ_wBAtM
2.http://www.youtube.com/watch#v=_qlYmk9BzMk&feature=related
3.http://www.youtube.com/watch#playnext=1&playnext_from=TL&videos=V1Nij2F8qOs&v=0Gy9HERZVf0
What windows version does your PC run?
Have you actually activated remote desktop on the PC?
Are you trying to connect via local network (are you at home) or from another place? If from another place, have you configured your router to forward port 3389 to your PC?
I'm having the same problem.. Not had any experience in remote desktoping myself (except stopping the Work's IT guy from spying on me whilst i trawl through XDA good at stopping, not so good at starting )
I think the reason I havent managed to get it to work is down to my router (Thompson peice of s*it!) wont let me.....
What i'm trying to get at is it might be your router...
Can't do it either, Thompson router might be my issue.
i did'nt look at the youtube vids, so i'm not sure you already looked into this. when on the target computer remote desktop is probably already on, but did you also allow all (older) versions of remote desktop te connect?
i remember that option is there since vista (perhaps even XP). for example: when that option is turned off in vista, any xp machine won't be able to connect. i'm pretty sure remote desktop mobile qualifies for 'old'
1. Right click on My Computer , properties , remote , enable remote on this computer
2. Do not obtain private address automaticly from your router , use static IP private address instead ,and on your router do a port forwarding to that static address
example 192.168.0.10 port 3389
3.Install client from dyndns.org that will map your IP address to your dynamicly changing IP global address that your service provider assignes you
4.Configure Administrator password on your windows computer if you dont allready have it
5.Run your remote desktop from your winmo and input all necessary that you had configured
I know that wont probablly be enough , but it is a start ,all missing blanks fill by yourself , google for things you dont know
done all that, still getting same connection error as the OP
im so confused now i dont know what ip i should put into the hd2 remote desktop app and dont even know if i configured my router ( asus wl520 gc ) right =/ if some 1 has the same router as i do, could you please tell me how to config it?
still cant get to work.
Remote Desktop nightmare..
Seems like u guyz gave up on this prob lol.
I getting really frustrated now, after 4 hours trying to get it working.
I have Vista Home Premium. Ppl on some sites are saying that you cannot use this OS to connect remotely. Then some say it works perfectly.
I added the ports on the rooter. Just to check if they are open I downloaded portchecker. (Pic added)
UDP 3389
Port is open.
TCP 3389
"Could not test port 3389 because some other application has that port locked. Please close any applications that may be using this port and try again."
Have no idea what application would be locking this port. If I go to canyouseeme.org the port is open and is not blocked by ISP.
Just to make sure I am doing rite:
Computer: Which IP do I use? My outside IP?
Username: This can be the one I am using to log into my computer or the full account name?
Password: password I'm using to log in
Domain: Leaving blank.
Anyone can help or sorted this issue out before?
Thanks
Suz
Remote Desktop Sorted..
Hi there..
Just wanted to add this in case someone else has the same issue.
If you have Vista Home Premium the Remote Desktop is disabled in the OS. You have to re-enable it using a hack.
This is the link which walks you through it hxxp://www.missingremote.com/index.php?option=com_content&task=view&id=1220&Itemid=224
Once you finish this make sure that you have the port forwarding on your router for 3389.
If you do it should run. I noticed that my internet connection died once I was able to connect to my computer using my HTC HD2. Once I disabled the port forwarding the internet worked again.
It's rather difficult to navigate on your PC using your Phone without a stylus but hey I'd rather have this than missing some other stuff..
If you need help with the remote send me a pm. I know how frustrating this can be..
xxx