SlideIT is always placing a space between words or, more accurate, in front of all words. Only the first word in a text gets away without a space before it. But, if I write the first word in a text, delete it to replace it with another word, it will create a space and the word will be all small letters!
Example:
Hi it's me!
(now, if i want to replace the word "Hi" with "Hello", I'll go back, delete that word only, and it turns out like this:
<space>hello it's me!
(a space in front of the first word, and its all small letters)
Also, in my language (norwegian) there is a lot of words that are combined by two words, but SlideIT doesn't allow me to enter two words without a space between them, unless i go back and delete the space myself.
Well, easy solution: Go to options and de-select the Automatic space option! Yeah, thats the problem right there. I've already tried a bunch of times, but it doesn't change anything! The spaces keep appearing no matter what!
I've already emailed Dasur, and here is what I got:
Dear Sven Erik
We will check this issue,
Can you tell me if it append aso in Note an Word application ?
Best regards,
Dasur Team
Click to expand...
Click to collapse
I answered YES to both apps, but still no answer.. (Sent on April 12th)
So, is anyone else having this problem?
Any solutions?
SlideIT looks nice and is nice to use but it has lots of little annoying bugs like the one you highlight here. The killer for me was the correction issue with HTC Messaging. I emailed Dasur suggesting they change their editing to the method Swype uses where you can place the cursor anywhere in a word to change it to something else using the suggestion system. With SlideIT you need to highlight the entire word which can't be done in HTC Messaging. As a result, any changes when composing text messages means the word has the be deleted and retyped in it's entirety.
As a result I'm still using Swype until these problems are resolved.
Pagnell said:
The killer for me was the correction issue with HTC Messaging... With SlideIT you need to highlight the entire word which can't be done in HTC Messaging. As a result, any changes when composing text messages means the word has the be deleted and retyped in it's entirety.
Click to expand...
Click to collapse
I'm starting to regret paying for this software...
tried asking for a refund if you're that unhappy?
fards said:
tried asking for a refund if you're that unhappy?
Click to expand...
Click to collapse
I'm kinda hoping that Dasur will fix these issues, because i really like this thing...
se1988 said:
SlideIT is always placing a space between words or, more accurate, in front of all words. Only the first word in a text gets away without a space before it. But, if I write the first word in a text, delete it to replace it with another word, it will create a space and the word will be all small letters!
Example:
Hi it's me!
(now, if i want to replace the word "Hi" with "Hello", I'll go back, delete that word only, and it turns out like this:
<space>hello it's me!
(a space in front of the first word, and its all small letters)
Also, in my language (norwegian) there is a lot of words that are combined by two words, but SlideIT doesn't allow me to enter two words without a space between them, unless i go back and delete the space myself.
Well, easy solution: Go to options and de-select the Automatic space option! Yeah, thats the problem right there. I've already tried a bunch of times, but it doesn't change anything! The spaces keep appearing no matter what!
I've already emailed Dasur, and here is what I got:
I answered YES to both apps, but still no answer.. (Sent on April 12th)
So, is anyone else having this problem?
Any solutions?
Click to expand...
Click to collapse
Norsk og tysk har mange likheter! (Er det riktig?)
I have the exact same issue: In German, many words are combined to create longer words as well and because the automatic space option is not working, it is not possible to enter them without having to remove the spaces inbetween manually afterwards. I also contacted Dasur and they sent me an answer thanking me for the feedback... But nothing has happened since! Otherwise SlideIt is awesome!
talk to them on their facebook page, they may be a bit more responsive there.
MAMeingast said:
Norsk og tysk har mange likheter! (Er det riktig?)
I have the exact same issue: In German, many words are combined to create longer words as well and because the automatic space option is not working, it is not possible to enter them without having to remove the spaces inbetween manually afterwards. I also contacted Dasur and they sent me an answer thanking me for the feedback... But nothing has happened since! Otherwise SlideIt is awesome!
Click to expand...
Click to collapse
Yup, Norwegian is part of the German language tree
I sent Dasur a new mail yesterday, and again they reply with questions. I answer them, and guess what? No replies...
Same problems with dutch language here. I also searched for a solution and sent an e-mail but no response.
I got my response from Dasur now, it seems like the auto space option is only ment for ABC-mode:
It's not a bug,
We think that in slide mode* you write word after word
and not try to add word to word (in most languages you can't combine words)
my suggestion to you is to save the long words and to slide them in one slide
In the next version we will offer to disable the auto space in the slide mode too.
Great Day,
DASUR TEAM
Click to expand...
Click to collapse
seems like we just have to wait for the new version for a solution...
se1988 said:
I got my response from Dasur now, it seems like the auto space option is only ment for ABC-mode:
seems like we just have to wait for the new version for a solution...
Click to expand...
Click to collapse
But that sucks! Sliding really long words with one pass is very inconvenient! The margin for errors is far too big! And it would be such an easy thing to implement! Come on!
Oh well... We'll see what the next version brings.
I just realized that the auto space option makes no sense if it is only ment for the abc mode, as you enter all letters and spaces manually. so as a reply to the mail I received earlier (see my previous posts) i had to reply:
Hi,
So what you are saying is that auto space option can only be turned off in abc mode? Is there even auto space in abc mode? How does auto space work in abc mode? I am sorry, but I cannot seem to make any sense of this...
Click to expand...
Click to collapse
I must say i'm a little exited to hear what Dasur have to say about this
se1988 said:
I just realized that the auto space option makes no sense if it is only ment for the abc mode, as you enter all letters and spaces manually. so as a reply to the mail I received earlier (see my previous posts) i had to reply:
I must say i'm a little exited to hear what Dasur have to say about this
Click to expand...
Click to collapse
LOL - yeah, please keep us updated!
se1988 said:
I just realized that the auto space option makes no sense if it is only ment for the abc mode, as you enter all letters and spaces manually. so as a reply to the mail I received earlier (see my previous posts) i had to reply:
I must say i'm a little exited to hear what Dasur have to say about this
Click to expand...
Click to collapse
maybe it makes sense combined with word prediction...
I've never seen slideit predict words in abc-mode...
MAMeingast said:
LOL - yeah, please keep us updated!
Click to expand...
Click to collapse
will do so
Im using SlideIT with Danish language pack and dont have that problem.
I use v. 4.1.0.3.
Pagnell said:
SlideIT looks nice and is nice to use but it has lots of little annoying bugs like the one you highlight here. The killer for me was the correction issue with HTC Messaging. I emailed Dasur suggesting they change their editing to the method Swype uses where you can place the cursor anywhere in a word to change it to something else using the suggestion system. With SlideIT you need to highlight the entire word which can't be done in HTC Messaging. As a result, any changes when composing text messages means the word has the be deleted and retyped in it's entirety.
As a result I'm still using Swype until these problems are resolved.
Click to expand...
Click to collapse
I agree, v4.1.0.3 has been out for quite a while now so i hope im wrong but i think it will still be a wihle before a newer version is released.
As mentioned, it actually does respond faster than Swype but Swype is much more finger friendly, has less bugs, its just a smarter layout for editing etc.
SlideIT has great advantages though like the abbreviations etc so if they can just tweak it a little, it will be better than Swype. Needs skins as well, very plain unfortunately.
New mail received!
Okay, i still cant seem to figure these guys out...
Dear Sven Erik
We meant that when you are tapping after a word in slide mode you will not get the auto space
if you slide you will get auto space always
Great Day,
DASUR TEAM
Click to expand...
Click to collapse
I feel they still havent quite ansvered my question, so I asked:
Hi,
Okay I understand. But why have you released a version with an option of turning off auto space if the option itself doesn't work?
Kind regards,
Sven Erik Larsen
Click to expand...
Click to collapse
Will keep posting updates!
jkolner said:
Im using SlideIT with Danish language pack and dont have that problem.
I use v. 4.1.0.3.
Click to expand...
Click to collapse
can you ACTUALLY turn off the auto space option successfully?
Related
Hey.
I have a problem.
Sometimes i accidently add words to my T9 Dictionary that i really dont want in it..
Is there any file or something that i can remove theese words in?
I havent found anything in the options menu...
Regards Harg
Bumping this as its quite annoying to have all theese stupid words...
BringUpMyPost
Like dirty words?
Like:
Ive added a word.. But miss spelled it..
And now it always chooses the miss spelled word first insted of the right word!
BringUpMyPost
Everytime you enter a word beginning with d it suggests donkeyporn. My wife wasn't pleased
still going to bump!
Bring up my post!
123
bringupmypost
hargibi said:
Like:
Ive added a word.. But miss spelled it..
And now it always chooses the miss spelled word first insted of the right word!
Click to expand...
Click to collapse
Ahhhhh, that would be "misspelled", not "miss spelled"
im having this problem as well, anyone ??
Hi all,
This drove me nuts for a while too.
Open explorer and navigate to device> windows >eT9MyWords
Select that and that opens up a listing of the T9 words you have inputed. delete the ones you no longer want in there.
I have added the shortcut to this to my programs listing so I don't have to navigate there each time.
Hope that helps.
tims31 said:
Hi all,
This drove me nuts for a while too.
Open explorer and navigate to device> windows >eT9MyWords
Select that and that opens up a listing of the T9 words you have inputed. delete the ones you no longer want in there.
I have added the shortcut to this to my programs listing so I don't have to navigate there each time.
Hope that helps.
Click to expand...
Click to collapse
No need to "Hope", that helps me a lot, thanks. I'm not crazy about all those miss spelling or just something that the T9 doesn't have and stored it, but it will be better to be able to delete all the crap.
I had this very irritating problem too. Everytime a mis-spelled word is typed, it is automatically stored in the whatever database. And the mis-spelled words will come back to haunt you every now and then.
Is there any way to control such that a new word is added only if you tick the "correct" button during the ABC mode's learning mode? Instead of the dictionary adding all the typing error into its database by itself?
On nearly every ROM i have used so far the typing for messaging, be it an email or a text, just crawls along. It is so painful. I have to sit there and wait and wait for the words to catch up. I'm sure you all know what i'm referring to. I did a search and didn't find a thread about it, although i am sure a solution is out there. Much thanks i you can point me in the right direction.
EDIT: P.S. Please pardon my faux pas....i just now realized, i did not mean to post this to this forum. Mods if you would like to move to the main Raph forum please do so. Cheers!
Mod Edit: Added the cab from the Kaiser forum to speed up keyboard as it works on the Touch Pro as well.
Dillsnik said:
On nearly every ROM i have used so far the typing for messaging, be it an email or a text, just crawls along. It is so painful. I have to sit there and wait and wait for the words to catch up. I'm sure you all know what i'm referring to. I did a search and didn't find a thread about it, although i am sure a solution is out there. Much thanks i you can point me in the right direction.
EDIT: P.S. Please pardon my faux pas....i just now realized, i did not mean to post this to this forum. Mods if you would like to move to the main Raph forum please do so. Cheers!
Click to expand...
Click to collapse
try disabling xt9 and see what happens.
I've noticed the same issue here! Still haven't found a fix tho ;-\
Kewlj1313
not sure where "x"t9 is, but i am pretty sure i have any t9/word complete options turned off and it still crawls. I pretty much want to get rid of that black box that appears around my words above the input area...i think that's the culprit
Did you really disable word completion under settings / input ??
Not sure why this is such a stupid question, as i would be keen to know the answer myself. You can wait ages for the input to catch up, once you have finished typing. So if anyone can help on this, i too would be grateful.
karloe said:
Did you really disable word completion under settings / input ??
Click to expand...
Click to collapse
I checked again and there was one more word complete in there somewhere that was not turned off....did a soft reset and it seems to be working normally Thanks for telling me to check again!
I have the same thing, too. When I slide open the phone and start typeing away, i have to let the letters catch up so I can see what I'm typing.
Kinda annoying...
Dillsnik said:
I checked again and there was one more word complete in there somewhere that was not turned off....did a soft reset and it seems to be working normally Thanks for telling me to check again!
Click to expand...
Click to collapse
Hello,
Could you please tell me where the other text completion format is?
I went to settings and messaging and turned that off as well as in the advanced config.
Thanks
Nevermind, it is still delayed for me
The settings are where karloe says earlier. Just check all the options and such everywhere in input settings, but i'm still getting delayed typing. It sucks
magic!
http://letmegooglethatforyou.com/?q=fuze+keyboard+speed+up
Fn + Space then choose ABC.
I know this is pretty obvious but I didn't know it, I found the solution here in the forum. Hope it helps you as it helped me.
Smaniac said:
Fn + Space then choose ABC.
I know this is pretty obvious but I didn't know it, I found the solution here in the forum. Hope it helps you as it helped me.
Click to expand...
Click to collapse
where do u do that? because when i am typing all that does for me is pull up the symbals
that is because you have a fuze
look to the right arrow hit fn then that
Went in there, ABC is selected already.....STILL a PAIN ITA
lbhocky19 said:
magic!
http://letmegooglethatforyou.com/?q=fuze+keyboard+speed+up
Click to expand...
Click to collapse
I did that and the link took me back here!!
Bump
I've tried every tweak, etc. out there....i am guessing that not everyone is having this problem then?
Another thing i notice that is annoying is that when i create a word it tends to save that word in the "word memory" just above the typing box, and if i jump to another part of the message and it still has saved that last word i typed, it will insert that word if i put a space or type a letter. Also very annoying. I have no word complete's or anything are turned on.
Mine works just fine...
But typing was very slow on my old Mogul.
Dillsnik said:
I've tried every tweak, etc. out there....i am guessing that not everyone is having this problem then?
Another thing i notice that is annoying is that when i create a word it tends to save that word in the "word memory" just above the typing box, and if i jump to another part of the message and it still has saved that last word i typed, it will insert that word if i put a space or type a letter. Also very annoying. I have no word complete's or anything are turned on.
Click to expand...
Click to collapse
Try the following .CAB which was just released by NATF for his v4.2 Fuze ROM...
http://forum.xda-developers.com/showpost.php?p=3241772&postcount=1668
Hope that this helps.
tora201 said:
I did that and the link took me back here!!
Click to expand...
Click to collapse
the first link that comes up is a link to fuzemobility wich shows an old trick from the tilt thats a regedit that helps alot
Hey everyone.
Does the "feature" where the sms one pressed is selected after all the other sms's are loaded, suddenly interrupting the writing, ever bother you guys?
I wonder if it's possible, as per the image below, "move out" the reply button from the menu list as a shortcut.
My programming skills lack here but I'd gladly make a reply icon if any of you geniuses would be able to do this.
umiss said:
Hey everyone.
Does the "feature" where the sms one pressed is selected after all the other sms's are loaded, suddenly interrupting the writing, ever bother you guys?
I wonder if it's possible, as per the image below, "move out" the reply button from the menu list as a shortcut.
My programming skills lack here but I'd gladly make a reply icon if any of you geniuses would be able to do this.
Click to expand...
Click to collapse
Interested. +1
I'm surprised not more people are bothered by this
Do the programmers think this is doable?
Would be good
I would like it too. +1
Hum…but if you click on the message, this automaticaly going on reply's mode, no ?
Straynart said:
Hum…but if you click on the message, this automaticaly going on reply's mode, no ?
Click to expand...
Click to collapse
no its going to the message thread and you have to press on that box where you can type text before you can start with ur reply.. wich costs a tremendous ammount of time. *sarcastic mode*
I dont get the idea of fix behidn this?? Isnt that just moving the reply shortcut, it would still open the same messaging window loading all the messages still...?
jamieeeee said:
no its going to the message thread and you have to press on that box where you can type text before you can start with ur reply.. wich costs a tremendous ammount of time. *sarcastic mode*
Click to expand...
Click to collapse
Hum, so it's depend on your ROM.
On mine [Artemis], this goes in reply's mode [I'm in conversation's mode].
Straynart said:
Hum, so it's depend on your ROM.
On mine [Artemis], this goes in reply's mode [I'm in conversation's mode].
Click to expand...
Click to collapse
ah didnt knew that im using dutty's HG 2.4.
also i dont have the problem the OP seems to have.. maybe he could try installing the new HTC Messaging 2014 version?
btw that can be found here
jamieeeee said:
ah didnt knew that im using dutty's HG 2.4.
also i dont have the problem the OP seems to have.. maybe he could try installing the new HTC Messaging 2014 version?
btw that can be found here
Click to expand...
Click to collapse
Remember you have to take the version of your language ROM. [the .dll of that topic is for ENG version].
Very good idea I think I don't want in that hole conversation mode. It is slow and it takes time.
jamieeeee said:
ah didnt knew that im using dutty's HG 2.4.
also i dont have the problem the OP seems to have.. maybe he could try installing the new HTC Messaging 2014 version?
btw that can be found here
Click to expand...
Click to collapse
I don't really follow what you're talking about.
I am using the latest Messaging.
Let me try to explain again.
When one presses the actual message, the conversation mode comes up and the sms's start loading. As soon as all the sms's finish loading, the message you had pressed becomes highlighted.
If you are writing meanwhile the messages are loading, as soon as the messages finish loading you won't see what you're writing anymore.
I've tried Artemis v14 and it was the same there.
I don't think there is a ROM that doesn't have this "feature", but if there is, please enlighten me.
If it's still unclear I could try to make a video, but I am sure that the latest HTC Messaging does not solve this, since I am using the latest one.
This is why I want the reply button out there. When pressing the reply button, no sms will be highlighted and you can write your text easily.
It is not a matter of being lazy, as I saw someone else mention earlier, but if you encounter this I don't know, maybe 20-30 times a day I ensure you it will get to your nerves!
Let me repeat myself, the thing bugging me is not that it doesn't go directly to the reply box, but that when the text you just pressed becomes highlighted, you don't see what you write anymore!
I have a similar problem.
When replying to a SMS, the messaging client loades all SMS you have in your contact box [and lagged the client] and when it finished, the keyboard comes over the typing SMS. So you can't see what you were writing.
But I merely remember a ROM |WinMo 6.5] where the messages are in the same mail client, just like on WinMo 6.1 [where mail and SMS where in the same messaging client].
Straynart said:
I have a similar problem.
When replying to a SMS, the messaging client loades all SMS you have in your contact box [and lagged the client] and when it finished, the keyboard comes over the typing SMS. So you can't see what you were writing.
But I merely remember a ROM |WinMo 6.5] where the messages are in the same mail client, just like on WinMo 6.1 [where mail and SMS where in the same messaging client].
Click to expand...
Click to collapse
Yes the NRG rom is like that for example. But I don't like the look if it. I'd rather have this solution that I'm trying to make happen!
umiss said:
Yes the NRG rom is like that for example. But I don't like the look if it. I'd rather have this solution that I'm trying to make happen!
Click to expand...
Click to collapse
Yeah, I don't like its design, but it works better, quicker and without lags.
It can be really usefull
from the most recent rom update, anyone know where i can get it?
devise said:
from the most recent rom update, anyone know where i can get it?
Click to expand...
Click to collapse
if you used the search you would of found it by now
http://forum.xda-developers.com/showthread.php?t=664697&highlight=skype+cab
i did!i couldnt find anything
ps: i said sWype not sKype
devise said:
from the most recent rom update, anyone know where i can get it?
Click to expand...
Click to collapse
this is 'sort of' warez so i don't think you will get it from xda..
if you google 'Swype Lord Yuz' however...
thanks for the tip!
SWYPE from 2.13 (with vibrate) - http://htcpedia.com/duttys_ime_swype.../leo-apps.html
Dasur SlideIT v4.1.0.3
What you need: WM 5 and above
SlideIT is a new and revolutionary way to enter text easily and fast, and in a way that is much more fun than existing methods. SlideIT is the best way to enter text into Touchscreen devices. With SlideIT you can multiply your writing speed after a few days of use.
From now on, just Slide along the letters with your finger or stylus, and words will “magically” appear.
Accuracy is not required.respect
SlideIT main features includes:
* Prediction
* Graffiti
* On/Off line correction
* Shortcut
* Multilanguage
More Infos and Language Packages:
Code:
http://www.mobiletextinput.com/Download
Code:
http://www.megaupload.com/?d=S9HOLI27
doctajay said:
here's the new version of swype that works perfect on my telstra hd2.
Click to expand...
Click to collapse
....................................
chrisd1a1 said:
this is 'sort of' warez so i don't think you will get it from xda..
if you google 'Swype Lord Yuz' however...
Click to expand...
Click to collapse
HAHAHAH man
ppl like u are just needed in this world
Man thanks for a humor filled and solving response, THANKS!
chrisd1a1 said:
this is 'sort of' warez so i don't think you will get it from xda..
if you google 'Swype Lord Yuz' however...
Click to expand...
Click to collapse
btw, do you know if there is a way to get the swedish dictionary on swype.. instead of the 6 default ones ...
be carefull!!!
chrisd1a1 said:
this is 'sort of' warez so i don't think you will get it from xda..
if you google 'Swype Lord Yuz' however...
Click to expand...
Click to collapse
My attempt to install Swype on my HD2 totally trashed it - wiped out all my logins of any kind and messed the rest of the phone up too - including disabling Sprite Backup. It almost reads like a deliberate bit of MalWare aimed at stealing login credentials and messing with your phone.
No amount of re-entering logins etc would solve it, I'm now in the process of rebuilding after a Hard Reset.
Take Precautions!
I know it's been asked once in this forum before (http://forum.xda-developers.com/showthread.php?t=986911) but I didn't have permission to bump due to my <10 posts.
But yea, I'm really bothered with how many unnessescary words are in my dictionary (using Swedish, not that it matters, but just FYI.) and also by the fact that alot of words start with a capital letter (names and towns I get, but sometimes other random words do too.)
So, I was hoping someone could figure out a way to edit the .dat file (found in data/data/com.dasur.slideit/app_databases/).
..or, if all else fails, even figure out a way to just completely erase all words so I can enter the words i use from scratch, with no unnessescary words what so ever.
Thanks!
I think there's only two ways to do it...
Either clear the SlideIT data to remove all the words, or when you see a word that you don't want, click the whole word and then the minus sign to get rid of it. But that's kinda tedious though.
jonesst07 said:
Either clear the SlideIT data to remove all the words, or when you see a word that you don't want, click the whole word and then the minus sign to get rid of it. But that's kinda tedious though.
Click to expand...
Click to collapse
bump