Database Info

How-To repair your bootloader after using the 2.1 RUU 1

I found this at AndroidCentral.com, hope those of you who use the official RUU and leak can find this beneficial. If you do thank gbhill at AndroidCentral for this. I can't confirm this because I don't use the RUU.
USE AT YOUR OWN RISK IF YOUR BRICK YOUR PHONE IT'S NOT ME.
Go to the link below for the flash_image and recovery image or you can search this forum for it.
forum.androidcentral.com/htc-hero-roms-hacks/9542-how-repair-your-bootloader-after-using-2-1-ruu.html
1. Make sure you have the Android SDK installed. Read HERE for more info.
2. Download 4shared.com - online file sharing and storage - download flash_image.zip
3. Download 4shared.com - online file sharing and storage - download recovery-RA-heroc- v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter Code
adb shell su mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell chmod 0755 /system/bin/flash_image reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter Code: adb shell su cd /sdcard flash_image recovery recovery-RA-heroc-v1.5.2.img reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROM again.
Sent from my HERO200 using Tapatalk

coderli said:
I found this at AndroidCentral.com, hope those of you who use the official RUU and leak can find this beneficial. If you do thank gbhill at AndroidCentral for this. I can't confirm this because I don't use the RUU.
USE AT YOUR OWN RISK IF YOUR BRICK YOUR PHONE IT'S NOT ME.
Go to the link below for the flash_image and recovery image or you can search this forum for it.
forum.androidcentral.com/htc-hero-roms-hacks/9542-how-repair-your-bootloader-after-using-2-1-ruu.html
1. Make sure you have the Android SDK installed. Read HERE for more info.
2. Download 4shared.com - online file sharing and storage - download flash_image.zip
3. Download 4shared.com - online file sharing and storage - download recovery-RA-heroc- v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter Code
adb shell su mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell chmod 0755 /system/bin/flash_image reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter Code: adb shell su cd /sdcard flash_image recovery recovery-RA-heroc-v1.5.2.img reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROM again.
Sent from my HERO200 using Tapatalk
Click to expand...
Click to collapse
For some reason I am thinking this was only for the Test RUU which has root and not for the Official Release.
eg the adb shell su will not work.
http://forum.xda-developers.com/showthread.php?t=684262

How to root the Droid 2

All credit for the binary goes to Sebastian Krahmer at http://c-skills.blogspot.com/. Please see fit to donate via Paypal to [email protected]
If you want a simpler 'one-click' process, go to this thread: Easier 1-2-3 Droid 2 Root for Windows / Linux / Mac
***NOTE: Proceed at your own risk. I and the providers of this code are not responsible for anything you do to your phone!***
Setup:
- Install adb (here) and Motorola drivers for windows(32-bit or 64-bit)
- Download attached archive
- Extract to a directory, I used c:\Droid2Root
- Make sure you have USB degugging enabled
- Change connection to PC Mode
Process:
- Open command prompt
- cd c:/wherever-your-sdk-tools-folder-is
- adb devices (to verify the connection)
- cd c:/Droid2Root
- adb push Superuser.apk /sdcard/Superuser.apk
- adb push su /sdcard/su
- adb push busybox /sdcard/busybox
- adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
- adb shell
- cd data/local/tmp
- chmod 0755 rageagainstthecage-arm5.bin
- ./rageagainstthecage-arm5.bin
- let the process run until it 'kicks' you out (may take a minute or two) to c:/Droid2Root
- cd c:/wherever-your-sdk-tools-folder-is
- adb kill-server
- adb devices (to verify the connection)
- adb shell (you should now have a # prompt, if not return to ./rage step above)
- mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
- cp /sdcard/Superuser.apk /system/app/Superuser.apk
- cp /sdcard/su /system/bin/su
- cp /sdcard/busybox /system/bin/busybox
- chmod 4755 /system/bin/su
- chmod 4755 /system/bin/busybox
- mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
- exit
- exit
I'm sure there are certain steps that could be streamlined or eliminated, so please feel free to make a suggestion and I'll edit the post.
Additional thanks to @rainabba and AllDroid.org for their excellent Droid X rooting tutorial, which assisted me greatly in this process.

waiting for a recovery, glad to see its rooted

Android n00b here, I can remove the Verizon crapware with this right? And tether?

thelolotov said:
Android n00b here, I can remove the Verizon crapware with this right? And tether?
Click to expand...
Click to collapse
yes and yes

thelolotov said:
Android n00b here, I can remove the Verizon crapware with this right? And tether?
Click to expand...
Click to collapse
I wouldn't remove anything yet since we don't have a sbf file to recover from partial bricks. However, tethering and any other apps that require root can be used now.

I'm new to doing this all the adb way.
When you say extract to a directory what do you mean to extract. After it downloads the achive files its done.....
i understand the rest of the commands but im lost there

Hmm, alright, that's still worth it, will I lose my data/have to hard reset to root?

Right click the downloaded archive and "extract files". You need to do this so adb can push them to the phone.

thelolotov said:
Hmm, alright, that's still worth it, will I lose my data/have to hard reset to root?
Click to expand...
Click to collapse
Nope, it just gives you access. Nothing deleted.

I'm retarded i didnt realize it was attached to the post, i thought it was what adb downloaded when i first opened it cause it called them archives.

cannot access
I got as far as pushing super user su and busy box onto my phone but it says that system in read only.. how do i fix this?

Anybody actually try this?

Hello,
I am following your directions and when I get to the "adb push Superuser.apk" step I receive the following error:
"failed to copy 'Superuser.apk' to '/system/app/Superuser.apk': Read-only file system"
I get this same error for the other adb push steps that follow.
Edit: To verify, I get a # shell.
Edit 2: I tried pushing the Superuser.apk to /data/local/tmp then cp to /system/app/, this also popped up a read-only file system error.

I'm currently trying it.
I have a 64 bit driver on my computer that i used to use for my D1 but it doesn't recognize my D2 when doing adb devices and i cant install the 32 bit driver

GSletta said:
I got as far as pushing super user su and busy box onto my phone but it says that system in read only.. how do i fix this?
Click to expand...
Click to collapse
Did you verify you have the # prompt three steps before that?

Yeah i get the # but it wont let me push superuser su and busybox

GSletta said:
Yeah i get the # but it wont let me push superuser su and busybox
Click to expand...
Click to collapse
Weird.. I didn't need to mount the system manually, but let me if there's a step I left out.

and some more screens (feel free to use in first post):
http://i.imgur.com/nPllt.jpg
http://i.imgur.com/COTEA.jpg
http://i.imgur.com/open3.jpg

djh816 said:
and some more screens (feel free to use in first post):
http://i.imgur.com/nPllt.jpg
http://i.imgur.com/COTEA.jpg
http://i.imgur.com/open3.jpg
Click to expand...
Click to collapse
Did you add any steps to mount the system? I don't believe I did, but it seems others are finding it to be read-only.

jerseyh22accord said:
I'm currently trying it.
I have a 64 bit driver on my computer that i used to use for my D1 but it doesn't recognize my D2 when doing adb devices and i cant install the 32 bit driver
Click to expand...
Click to collapse
Don't know if it will help you, but if it's anything like the DInc, you could just use the SDK's drivers and add a few device identifier lines to the INF file before installing them.

ADB question

I have read many posts about ADB push/remount permission issues, etc. But unfortunately I still have not figured out what's wrong with my situation. First of all, I don't have a micro SD card, so I have to push files directly to the phone memory.
I firstly tried "adb push" but seems it doesn't work for me
$ adb push email.apk /system/app
failed to copy 'email.apk' to '/system/app/email.apk': Read-only file system
Click to expand...
Click to collapse
Then I searched online and people said you need to remount first. Then I got the infamous permission problem
$ adb remount
remount failed: Operation not permitted
Click to expand...
Click to collapse
Then I tried open shell first. no go
$ adb shell
$ mount -o remount rw system/app
mount: Operation not permitted
Click to expand...
Click to collapse
I searched more and found it can get su permission so to make things work. But when I hit "su(enter)" after open adb shell, I don't see the "#" showing up but still got an error message after waiting for a while
$ adb shell
$ su
Permission denied
Click to expand...
Click to collapse
Any one can please tell what's wrong with my operation? I rooted my G2x but didn't flash it. I installed the ROM manager and installed CWM but didn't proceed to reboot into recovery mode.

tangyoulei said:
I have read many posts about ADB push/remount permission issues, etc. But unfortunately I still have not figured out what's wrong with my situation. First of all, I don't have a micro SD card, so I have to push files directly to the phone memory.
I firstly tried "adb push" but seems it doesn't work for me
Then I searched online and people said you need to remount first. Then I got the infamous permission problem
Then I tried open shell first. no go
I searched more and found it can get su permission so to make things work. But when I hit "su(enter)" after open adb shell, I don't see the "#" showing up but still got an error message after waiting for a while
Any one can please tell what's wrong with my operation? I rooted my G2x but didn't flash it. I installed the ROM manager and installed CWM but didn't proceed to reboot into recovery mode.
Click to expand...
Click to collapse
you need to look at your phone and allow superuser app to grant permission

crazythunder said:
you need to look at your phone and allow superuser app to grant permission
Click to expand...
Click to collapse
su app? how should I set it? I didn't see anyone mentioned that. Do you care to give a bit more details? Thanks.

I think I figured out. I have to manually run the superuser app and let it say in active. Then when I type in "adb shell" the app on the handset will ask my permission. Thanks for the reminder.
Plus I am doing the following as the following that I read from another thread
adb shell
$ su
# mkdir /data/yourname
# chmod 777 /data/yourname
# exit
$ exit
adb push gps.conf /data/yourname
adb shell
$ su
# mount -o remount,rw /dev/block/mtdblock6 /system (copy biggrin.gif)
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock6 /system (copy biggrin.gif)
# mv /data/yourname/gps.conf /system/etc
Click to expand...
Click to collapse

[HTC EXPLORER] Flash back to Yannou90's recovery after flashing CWM

The official CWM has problems in mounting SD-EXT, thus, Jaggyrom and other custom roms (except stock) won't work properly and your phone will reboot everytime you install apps. You'll also get a lot of app crashes because Dalvik cache can't move properly. Now here's how to flash back to Yannou90's recovery using only Android Terminal Emulator.
__________
THINGS YOU NEED:
1. Your HTC Explorer must be rooted
2. Flash_image and Recovery (You can download it here on this thread)
3. Root File Explorers (Like Root Explorer and ES File Manager, at play store)
STEPS:
1. Download the zip file, read the readme inside the zip, and extract flash_image and recovery.img to the root of your SD Card
2. Download Root Explorer from play store, you can use ES file explorer if you want a root file explorer for free
3. Using your root explorer, copy flash_image to /system/bin/ but before you do that, make sure you mount /system/bin/ as R/W.
4. After copying flash_image, set flash_image permissions to rwxrwxrwx
5.Download Android Terminal Emulator on Play store
6. Run Terminal Emulator and open up preferences.
7. at the initial command, put this:
export PATH=/system/bin:$path
7. Go back to Terminal and Type su
8. Superuser should prompt. Accept it.
9. If you saw # it means you are running it as root, which is that we really needed. If you saw $ , it's not running as root and do type su again.
10. now type this:
flash_image recovery /sdcard/recovery.img
11. Wait for it and if it's done, boot your phone to recovery.
12. CONGRATULATIONS AND YOU ARE BACK TO YANNOU90's RECOVERY
DOWNLOAD LINK:
Flash_Image and Recovery.zip

mrchezco1995 said:
......
2. Flash_image and Recovery (You can download it here on this thread)
......
Click to expand...
Click to collapse
Sorry, on trying to download the following message shows up.
"The page you have requested does not exist. Please check your spelling and try again."
Can you please re-upload the Flash_image and Recovery.zip ?

Download link 404..
Sent from my HTC desire_HD using xda app-developers app

beegeevee said:
Sorry, on trying to download the following message shows up.
"The page you have requested does not exist. Please check your spelling and try again."
Can you please re-upload the Flash_image and Recovery.zip ?
Click to expand...
Click to collapse
Deivi_Z said:
Download link 404..
Sent from my HTC desire_HD using xda app-developers app
Click to expand...
Click to collapse
Download link fixed. Uploaded it to mediafire instead. Thanks for reminding guys.

permission denied
followed all the steps....still got the "Permission Denied" message

followed all the steps....still got the "Permission Denied" message
Click to expand...
Click to collapse
Check superuser and make sure Terminal is allowed. And type su in all lowercase, not uppercase like SU. That wont work
Sent from my HTC Explorer using XDA

mrchezco1995 said:
The official CWM has problems in mounting SD-EXT, thus, Jaggyrom and other custom roms (except stock) won't work properly and your phone will reboot everytime you install apps. You'll also get a lot of app crashes because Dalvik cache can't move properly. Now here's how to flash back to Yannou90's recovery using only Android Terminal Emulator.
__________
THINGS YOU NEED:
1. Your HTC Explorer must be rooted
2. Flash_image and Recovery (You can download it here on this thread)
3. Root File Explorers (Like Root Explorer and ES File Manager, at play store)
STEPS:
1. Download the zip file, read the readme inside the zip, and extract flash_image and recovery.img to the root of your SD Card
2. Download Root Explorer from play store, you can use ES file explorer if you want a root file explorer for free
3. Using your root explorer, copy flash_image to /system/bin/ but before you do that, make sure you mount /system/bin/ as R/W.
4. After copying flash_image, download Android Terminal Emulator on Play store
5. Run Terminal Emulator and open up preferences.
6. at the initial command, put this:
export PATH=/system/bin:$path
7. Go back to Terminal and Type su
8. Superuser should prompt. Accept it.
9. If you saw # it means you are running it as root, which is that we really needed. If you saw $ , it's not running as root and do type su again.
10. now type this:
flash_image recovery /sdcard/recovery.img
...
After this step what I get is as follows
usage: flash_image partition file.img
sh-3.2#
Click to expand...
Click to collapse

Superuser worked fine on terminal. But also got permission denied on last command in terminal.. should I push it via ADB?

You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
[BTW, if you're wondering, the first command identifies as root, the second remounts /system as RW, the last copies the file]
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.

SifJar said:
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
Click to expand...
Click to collapse
Thank You. U completed this thread. Decided to use fastboot (faster) instead of terminal emulator way.

SifJar said:
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
Click to expand...
Click to collapse
Mine worked for me on terminal without any problems, but thanks for filling up what I just missrf for others. Hehe
Sent from my HTC Explorer using XDA

mrchezco1995 said:
10. now type this:
flash_image recovery /sdcard/recovery.img
11. Wait for it and if it's done, boot your phone to recovery.
]
Click to expand...
Click to collapse
I did upto this point when I write and enter this string nothing happens it gives me another sh-3.2# to write in. How would I know that the Yannou90 recovery has completed??? I'm stuck

SherazHashmi said:
I did upto this point when I write and enter this string nothing happens it gives me another sh-3.2# to write in. How would I know that the Yannou90 recovery has completed??? I'm stuck
Click to expand...
Click to collapse
Why don't you try step 3 from jaggyjag's rooting tutorial....
Sent from my HTC Explorer A310e using xda app-developers app

My HTC Explorer's recovery was stuck green logo, but what thing that helped to get back my clockword recovery
is just downloading you recovery file and renamed it recovery.img
And...
I used Android SDK tool, and used the below command in command prompt and then I reboot the mobile, and I got back:
fastboot flash recovery recovery.img
Thanks for this valuable thread

SU not found !
after changing the INITIAL COMMAND
i restarted d terminal and now the initial command just gets printed and after that i typed 'su'...d output was 'su not found'..
wats d problem ???
I even tried d fastboot method...dats epic, whenever i try to install any .zip from it dis is wat i see
"Installing update...
Installation aborted."
Plz suggest nythng else other than REFLASHING it...its just that sumthng is restricting it to install :laugh:

hi! I have a question regarding recoveries... i have a recovery by yannou90 installed on my htc explorer, will this recovery work for other roms such as CM9 and CM10? It worked well with JaggyJags rom (3.2.1).. i am wondering if I need to switch to other recovery prior to installing CM roms.. thanks!

iamwin said:
hi! I have a question regarding recoveries... i have a recovery by yannou90 installed on my htc explorer, will this recovery work for other roms such as CM9 and CM10? It worked well with JaggyJags rom (3.2.1).. i am wondering if I need to switch to other recovery prior to installing CM roms.. thanks!
Click to expand...
Click to collapse
Yeah, ll work for all rom installation...
Hit :thumbup: if i helped...

R. SAINT said:
Yeah, ll work for all rom installation...
Hit :thumbup: if i helped...
Click to expand...
Click to collapse
got it man!

the steos for flashing the recovery worked for me but after 2 weeks now it responds to nothing when i try to wipe dalwik cache or perform any other funtion it displays nothing only the green title saying yonnou90 recovery.

Mayank T said:
the steos for flashing the recovery worked for me but after 2 weeks now it responds to nothing when i try to wipe dalwik cache or perform any other funtion it displays nothing only the green title saying yonnou90 recovery.
Click to expand...
Click to collapse
My initial response to such a situation would be start the phone in fastboot mode and then flash the recovery from there. Download the ZIP here: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100, extract it and double click "recovery.bat" once the phone is in fastboot mode (start phone holding volume down, select fastboot from menu instead of recovery).
This assumes you're on Windows. If you're on Mac/Linux, find the fastboot binary for your platform and run the following command in a terminal:
Code:
./fastboot flash recovery recovery.img
where recovery.img is taken from the ZIP I linked above.
Alternatively, you could install a more up-to-date recovery such as TWRP or a newer build of CWM (not sure of links for the latest versions of either, but have a look around the forum and you should find them. Also some older builds of CWM had bugs [hence this thread exists], but I think the newer builds work fine on the Explorer; not 100% sure as I still use yannou90's build)

Help on pushing files to device (ADB)

Hello guys, experiencing another problem now :silly:
Have search all around, couldn't find any valid answers so I decided to ask myself.
So I was just making a rom, which I have already installed. It's based on Cataclysm (personal use only - Till I ask for perm).
I have installed the rom, then I decided to theme some system files. And so I did. I theme the "Settings.apk" for now, and decided to push it to my device instead of installing the whole rom over again. Now mind you when I made roms and modified system apps, pushing these files to the device was straight forward. However on this Hammerhead, I've been running into some issues.
When pushing the file to my device like this
Code:
adb push Settings.apk system/priv-app
.
I get an error that says -
Code:
failed to copy "Settings.apk" to "system/priv-app/Settings.apk" : Read only file system.
So I then decided to try the following -
Code:
[x] adb root - Permission Denied
[x] adb remount - Permission Denied
So then I decided to use some shell commands to set the system as rw, I did the following.
Code:
[x] adb shell
[x] $ su - gave it permission
[x] $ mount -o rw,remount /system - It mounts it.
I then restarted cmd with root permission.
Code:
adb root"
- it restarted however, this time it stated.
Code:
Device not found.
I probably did the wrong thing above, so how exactly can I push files to /system?
SOLVED
Thanks to everyone that answered my question in detail.

The easiest way I know to push files to /system through adb is using a custom recovery . Try with it.

Why not use usb or AirDroid to transfer files?

gee2012 said:
Why not use usb or AirDroid to transfer files?
Click to expand...
Click to collapse
Is it possible to push files to /sustem/priv-app with it?
varuntis1993 said:
The easiest way I know to push files to /system is using a custom recovery . Try with it.
Click to expand...
Click to collapse
How would I do so? I've ever only used recovery to flash. And that was it, thanks if you can guide me through it?
Sent from this toast making Nexus 5, you wish your Nexus could make toast don't you? (;

krishneelg3 said:
Is it possible to push files to /sustem/priv-app with it?
How would I do so? I've ever only used recovery to flash. And that was it, thanks if you can guide me through it?
Sent from this toast making Nexus 5, you wish your Nexus could make toast don't you? (;
Click to expand...
Click to collapse
Boot into recovery and connect the usb cable. Open a cmd prompt.
Code:
adb shell
mount /system
exit
adb push c:\users\krishneelg3\desktopmyfile /system/priv-app
You can also use the "mount system" option in recovery and skip the first 2 commands above.

krishneelg3 said:
How would I do so? I've ever only used recovery to flash. And that was it, thanks if you can guide me through it?
Sent from this toast making Nexus 5, you wish your Nexus could make toast don't you? (;
Click to expand...
Click to collapse
Open recovery, mount system partition and connect it to pc and then normal procedure.
It will be running as adbd to no need to type adb root. Hope this helps

rootSU said:
Boot into recovery and connect the usb cable. Open a cmd prompt.
Code:
adb shell
mount /system
exit
adb push c:\users\krishneelg3\desktopmyfile /system/priv-app
You can also use the "mount system" option in recovery and skip the first 2 commands above.
Click to expand...
Click to collapse
Thank you so much! Greatly appreciated.
Sent from this toast making Nexus 5, you wish your Nexus could make toast don't you? (;

You can still do it through Android, but it's more difficult because adb root doesn't always work (requires kernel) and you have to mount r/w which is just a pain. I always adb push in recovery.
However, here is an example of a successful attempt to adb push on my nexus 5.
Code:
C:\Users\rootsu\Desktop\tools>adb root
adbd is already running as root
C:\Users\rootsu\Desktop\tools>adb shell
[email protected]:/ # mount -o remount,rw /system
mount -o remount,rw /system
[email protected]:/ # exit
exit
C:\Users\rootsu\Desktop\tools>adb push [B][COLOR="Red"]test.txt[/COLOR][/B] /system/
C:\Users\rootsu\Desktop\tools>adb shell
[email protected]:/ # cd system
cd system
[email protected]:/system # ls
ls
addon.d
app
bin
build.prop
core
etc
fonts
framework
lib
lost+found
media
priv-app
[B][COLOR="red"]test.txt[/COLOR][/B]
tts
usr
vendor
xbin
[email protected]:/system #

rootSU said:
You can still do it through Android, but it's more difficult because adb root doesn't always work (requires kernel) and you have to mount r/w which is just a pain. I always adb push in recovery.
However, here is an example of a successful attempt to adb push on my nexus 5.
Code:
C:\Users\rootsu\Desktop\tools>adb root
adbd is already running as root
C:\Users\rootsu\Desktop\tools>adb shell
[email protected]:/ # mount -o remount,rw /system
mount -o remount,rw /system
[email protected]:/ # exit
exit
C:\Users\rootsu\Desktop\tools>adb push [B][COLOR="Red"]test.txt[/COLOR][/B] /system/
C:\Users\rootsu\Desktop\tools>adb shell
[email protected]:/ # cd system
cd system
[email protected]:/system # ls
ls
addon.d
app
bin
build.prop
core
etc
fonts
framework
lib
lost+found
media
priv-app
[B][COLOR="red"]test.txt[/COLOR][/B]
tts
usr
vendor
xbin
[email protected]:/system #
Click to expand...
Click to collapse
Thank you I will keep my eye on this and see if the process is similar. Thanks for the info.
Sent from this toast making Nexus 5, you wish your Nexus could make toast don't you? (;